Database Info

[ MOD ] Custom MTD Partitions by Firerat (resize Cache, Data & System)

This thread is based on Firerat's work, just modded a little to be more specific for the EVO, so be sure to thank him for his work
http://forum.xda-developers.com/showthread.php?t=717874
I modded the script so a default of 250MB for system & 125MB for cache(leaves ~570MB for data) is included, so the mtdpartmap.txt in the SD card is not required unless you want to change those. If a mtdpartmap.txt is detected in the SD card during flash, it will overwrite those defaults values with whatever is in the mtdpartmap.txt.
For those that want to change the default values, just mod the attached mtdpartmap.txt
S-OFF is required
This is not for the faint of heart and requires how to flash using fastboot if you want to revert back to stock partition sizes, so if your not comfortable with ANY of the install & uninstall steps below, DO NOT FLASH THIS!!!
Be sure to check how much space your current ROM uses in the system & cache partitions before flashing this, so that way you don't cause problems with this MOD
Most de-odex'd ROMs should be fine with a 250MB system partition but those that are using a Desire HD/Z based ROM might need 300MB or slightly more, so be sure to double check your current system/cache usage before flashing
Also, too small of a cache partition will cause errors with some games & downloading of OTA updates as it uses the cache partition as the download folder
Install
1. Copy FR_Boot_CustomMTD_v1.5.7b_for_EVO, FR_Recovery_CustomMTD_v1.5.7b_for_EVO, FORMAT_ALL zips(& custom mtdpartmap.txt if you want to change the default sizes) to your SD card
2. Reboot into recovery
3. Make a Nandroid backup if you didn't already
4. Format cache, data & system partitions using my FORMAT_ALL.zip for ease
6. Flash FR_Recovery_CustomMTD_v1.5.7b_for_EVO.zip(this patches the recovery to use the custom partition sizes)
7. Reboot into recovery again
8. Restore Nandroid backup or flash new ROM but don't reboot
9. Flash FR_Boot_CustomMTD_v1.5.7b_for_EVO.zip(this patches the kernel to load the custom partition sizes)
10. Reboot
NOTE
Everytime you flash a new ROM or kernel, you must flash the FR_Boot_CustomMTD_v1.5.7b_for_EVO.zip afterwards, so the kernel gets modded to load the custom partition sizes
Uninstall
1. Make a Nandroid backup if you didn't already
2. Boot into Bootloader and select Fastboot USB
3. Reflash custom recovery console using Fastboot
Code:
Fastboot flash recovery recovery.img
4. Reboot into recovery
5. Format cache, data & system partitions using my FORMAT_ALL.zip for ease
6. Restore Nandroid backup or flash new ROM, if the restore contains a kernel that has modded partition sizes, then reflash the kernel
7. Reboot
Examples
Default 250/125 settings leaves this much on wipe
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
200/100 settings leaves this much on wipe

....................

Going in!!!

so besides the increase in available data space, is there any performance advantages?

No real advantages besides that you regain all the lost space from the cache & system partitions

xhazyx said:
so besides the increase in available data space, is there any performance advantages?
Click to expand...
Click to collapse
Thats the thing more space= Faster performance cause its not lagging trying to scoop up memory for stuff

Calk,
Do we have to do this all the time before a new rom or is it gonna b in there all the time?

luckylui said:
Thats the thing more space= Faster performance cause its not lagging trying to scoop up memory for stuff
Click to expand...
Click to collapse
If your low on memory, then I can see some performance increases but I guess I'll have to do a before and after benchmark to see for sure.
luckylui said:
Calk,
Do we have to do this all the time before a new rom or is it gonna b in there all the time?
Click to expand...
Click to collapse
If it contains a kernel, then yes you do need to flash the boot zip one to mod the new kernel again

wow. that is all.

Calkulin said:
If your low on memory, then I can see some performance increases but I guess I'll have to do a before and after benchmark to see for sure.
If it contains a kernel, then yes you do need to flash the boot zip one to mod the new kernel again
Click to expand...
Click to collapse
Any kernel??
I can digg it if its like that

luckylui said:
Any kernel??
I can digg it if its like that
Click to expand...
Click to collapse
SHOULD work on any kernel

Calkulin said:
SHOULD work on any kernel
Click to expand...
Click to collapse
Thank you sir!
Preciate the sponses and im off on my adventure!!
Oh do i love adventures!

Preview is finally here, Yay. Thanks caulk. Amazing work on 1.62

Calkulin said:
If it contains a kernel, then yes you do need to flash the boot zip one to mod the new kernel again
Click to expand...
Click to collapse
So I assume that the boot zip needs to be flashed whenever changing kernels even when the Rom is not changed?

mptherealmp said:
So I assume that the boot zip needs to be flashed whenever changing kernels even when the Rom is not changed?
Click to expand...
Click to collapse
Correct
10char

Amazing work Calkulin! I am going to test this on mIuI.

Thank you Calk. I was just looking into this thread over on the G1 forums. This is going to come in very handy.

What recovery is the custom recovery based on?
EDIT
NM: Reading comprehension problems. Now I see that it patches the recovery. My other question is do you guys think resizing and creating a swap partition would be beneficial? I already have a lot of free space on /data after moving dalvik-cache to /cache.

Thanks Calk.
Just flashed this, nand restored, and I have 100+ mb available.
Edit: I have about 100mb MORE available than before making this mod on the same ROM/kernel combination.

seems very ricky lol sorry but i have bricked 2 evos lol from not listening to what a guide says and trying my way lol
it would be really cool if someone made a tut and put it on utube or something there needs to be more vids on there of evo any way and no junkphone i mean iphone lol

[Rom] Liberty3 For The Droid 2 11/04 - Its Time For A Revolution!

Liberty 3
Its time for a Revolution!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Notes:
* Please Wipe Data regardless of what ROM you come from
This is a 1st Init based so use the proper CWM
Team Liberty
Primary Dev’s and project leads - Kejar31, Jurmmy16 and Syaoran12
Artist - Koveleski
Thanks:
FABOLOUS for all his help on the DX port!
Thanks to Teamdouche for publicly posting the CM source, which I compiled some of my apps from
Thanks to Superteam and Dustin Jorge as Liberty-Laucher was forked from and based on their work
Everyone else who helped make this ROM possible - you know who you are
Features:
- Most all apps were built from source.... rather that decompiled and hacked apps via APKmanager!!!!! To do this I took the CM7 source tree and reworked the framework to allow apps to properly find resources after they were compiled.
- The only apps left from Blur are the Dialer, Contacts and Camera
- AppWidgetPicker - built byboombuler
- Ads blocked via hosts file -thanks to delta_foxtrot2
- 1% battery increments built in (Icons made by thanks to Nitro)
- Themed Dialer, Contacts, Task Manager by me to integrate into the stock GB look and feel
- Reboot options (Reboot,Recovery and Screenshot)
- DSPManager included
- Custom Launcher2 with extra hotseats and speed tweaks (lightest fastest launcher you will ever use)
- Liberty Customizer (choose to add back blur apps)
- Lockscreen options (rotary, sliding tab and music controls)
- Start-up Tweaks (tool to allow you to manager your start-up tweaks)
- Root Browser (full edtion that normally comes with the pro version of the ROM toolbox - no need for Root explorer any-longer)
- Root Toolbox
Known Issues:
Disclaimer:
I nor anyone in Team Liberty take any responsibility for what this ROM or its tools may do to your phone.
Download:
Liberty3 for the Droid 2 1.0
Option #2 - download rom toolbox -> go to rom manager -> liberty
Updates:
Install - CWM only:
make sure you have root and Clockwork recovery installed
-boot into recovery via Recovery
-select "wipe data/factory reset"
-select "Yes -- delete all data"
-go back
-select "install zip from sdcard"
-select "choose zip from sdcard"
-find and select LibertyXX.zip
-reboot
Install Themes:
-boot into recovery via Recovery
-select "install zip from sdcard"
-select "choose zip from sdcard"
-find and select LibertyXthemeX.zip
-reboot
Donate:
Donate to Kejar31
Donate to Jrummy16
Screenshots

I miss my droid2 because of your original ROM !! glad to see you guys are still actively dev'n for this great phone =]

Thank you SO MUCH for making this. I noticed you run Gummycharged! so do I, haha! I have such an old version of Android running on my Droid 2. it must've been fate that I checked today and saw your topic.
EDIT: tried to install from CWM v2.5.0.8, did a data/factory reset and wiped dalvic cache. phoen stuck at M logo

TidusWulf said:
Thank you SO MUCH for making this. I noticed you run Gummycharged! so do I, haha! I have such an old version of Android running on my Droid 2. it must've been fate that I checked today and saw your topic.
EDIT: tried to install from CWM v2.5.0.8, did a data/factory reset and wiped dalvic cache. phoen stuck at M logo
Click to expand...
Click to collapse
You needed to makebsure you were at least on the latest ota there should be an sbf out there
Sent from my DROID BIONIC using Tapatalk

kejar31 said:
You needed to makebsure you were at least on the latest ota there should be an sbf out there
Sent from my DROID BIONIC using Tapatalk
Click to expand...
Click to collapse
yeah I used ROM Toolbox to download Gingerbread just now, then updated to Liberty. so far it seems to be booting up, but gingerbread gave me a problem where my phone volume was too soft. I hope liberty's software won't repeat that issue since I'm coming from gingerbread.

That's not the ota update.

Installed rom, very quickly got insufficient space on device error message while restoring apps through market. But plenty on phone and on sd. Clear data on market and reboot, still no go. Any ideas? No reply on RootzWiki...
Sent from my DROID2 using XDA App

Gingerbread update gave me no sound during phone calls. Liberty flash fixed that issue but broke my 3G data connection. not sure which is worse x_x

TidusWulf said:
Gingerbread update gave me no sound during phone calls. Liberty flash fixed that issue but broke my 3G data connection. not sure which is worse x_x
Click to expand...
Click to collapse
Your answer is 2 posts back. Do NOT use Gingerbread from the toolbox. That is the old leaked version. Sound would have restored to normal after a reboot. Data probably broke because tje version of Liberty you tried was for Official OTA Gingerbread.
So now you probably need to sbf, then from Froyo, select menu, settings, about phone, system updates. Then you can root using new D3 method.
Sent from my DROID2 using XDA App

Is there a way to get the OTA update without being connected to a network. Maybe thru wifi? I've looked everywhere on the internet for it but it doesn't seem like its out there yet.

Just want to let everyone know, I have installed this ROM and so far it is fantastic.
I love that it has all of the USB modes available for sync'ing with a PC. This is something I sorely missed with CM7.

Just tried to install this ROM. I had MIUI on it so I SBF'd it back to 2.3.20. Phone was up and going with a fresh install. Re-rooted. Installed bootstrap 1.0.0.5 and then attempted Liberty. Got stuck on the 'M' logo. What did I do wrong?

D2user said:
Your answer is 2 posts back. Do NOT use Gingerbread from the toolbox. That is the old leaked version. Sound would have restored to normal after a reboot. Data probably broke because tje version of Liberty you tried was for Official OTA Gingerbread.
So now you probably need to sbf, then from Froyo, select menu, settings, about phone, system updates. Then you can root using new D3 method.
Click to expand...
Click to collapse
So if I read this correctly, I can't install this ROM from CM7? That's a pain in the ass, because if I have to flash back to OTA Gingerbread, then I can't run CM7, because it only runs on a Froyo base.
Unless, and please tell me if this will work, if I make a backup of CM7, flash back and OTA to Gingerbread and install Liberty. Will the CM7 backup be able to be restored if Liberty was installed on Gingerbread?

No you can not flash back to froyo based cm7. You can run rev's cm7 which is built to run on ota gingerbread. Its in rom toolbox.

I think you misunderstood. I'm running cm7 now, but wanted to run Liberty. If liberty only installs over Gingerbread ota, but cm7 only installs over Froyo (the 2.4.330 sbf), I can't backup cm7, sbf, take the ota, install Liberty and then restore the backup of CM7, can I?
my point is, it seems like we can either run CM7 OR Liberty, but we can't flash back and forth between both. Please correct me if I'm wrong.

You could restore to your cm7 after sbf back to froyo.
Or run revnumber's cm7 on the ota and liberty. Revnumber's cm7 builds can be downloaded from rom toolbox app and run on the ota gingerbread

Interesting. Sorry for the hijack, but how stable is the revnumbers release? I think my current cm7 (http://download.cyanogenmod.com/?device=cdma_droid2we&type=stable) might be the cause for my other app issues, like Boot Manager. I tried installing this version of Liberty into an SD port in Boot Manager and it bootlooped; the dev canpt figure out why the D2G doesn't load the ROMs properly, so I think it might be the CM7 I'm using that's over Froyo.

Its as stable as froyo cm7. Its the same rom just has some lib files updated to run on gingerbread kernel. You can check out rootzwiki.com. that's where it is posted and discussed

Sounds good thx. I'm going to SBF, OTA and try both CM7 and Liberty. I'll report back.

[Safestrap]UnofficalV.2 **Safe strap is having issues please be patient**

*please hold off use of safe strap until further notice. I promise you we are hard at work on it************************************************************There is a new version at the bottom of the post. Please uninstall recovery from with in your currently installed v.1 then uninstall safestrap app. Download and install v.2 and install recovery. If you already have a safe system installed you will need to reflash the zip and wipe data/factory reset. Thanks Jim for the fix! There are now 2 different versions 1 for those not running jims webtop hack and one for those of you that are. Please download the safestrap appropriate for your setup at the bottom of the page. ********************************************************************************************************************************************************************************
What works?
-Everything except mounting usb in recovery.
-Cant seem to format safe system /data
Here it is!!! Our very own Unofficial safestrap recovery!
Whats this mean? Custom rom's!!! CM7 CM9 etc! And no more fxz or cwm on every boot just to save from a softbrick.
How'd we do it?
This was a pain in the A**, Jimbridgeman and myself have worked our butts off on this. We changed the recovery.fstab around so that we are able to use the sd card as a mount point to install the /system partition as well as a separate partition for /data. So in laymen's terms, were booting from the sd.
How to Install -(From Windows)
(Partition sizes are up to you but ext3 partition should be no less then 350mb and the second fat partition should be not less then 500mb)
1.Backup your sdcard
2.Format your sdcard from your phone under settings-storage
3.Put your sdcard into some kind of card reader and place into computer
4.Download, install, and open Mini Tool http://www.partitionwizard.com/free-partition-manager.html
5. Right click on your sd card, click resize
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6. Re size so that you have at least 850mb left "Unallocated"
7.Click OK
8.Click apply changes
9.Right click on unallocated partition and select create
10. Click Yes
11.I went with 1gb, this is the data partition, It needs to be at least 500mb and your settings must match mine. Primary,Fat32
12.Click apply changes
13.Right click on unallocated space, select create
14.Click Yes
15. This is the System partition and needs to be at least 350mb, Your settings must match mine. Ext3,Primay
16.Click on apply changes.
17.Click Yes.
18.You are all done! Should look something like this.
Now to install the safestrap
http://db.tt/y6xKucmg (V.2)
http://db.tt/RzY6VJTi (V.2-Running webtob hack)
Special thanks to jimbridgeman and hashcode. (JIM... I LOVE YOU!!!)
Head down below and click the thanks button, then head over to jimbridgeman's profile and click thanks again!
**You do not need to quick toggle safe system to wipe/format anymore in v.2**

Omg yes
Sent from my MB865 using XDA App

One noob question so the safe system is on the mobile internal memory or on the SD card? If on SD card is it fast enough not to cause performance issues?
Sent from my MB865 using XDA App

alcatel444 said:
One noob question so the safe system is on the mobile internal memory or on the SD card? If on SD card is it fast enough not to cause performance issues?
Sent from my MB865 using XDA App
Click to expand...
Click to collapse
The safe system is stored to the sd card, no real performance issues.. 5500ish in antutu running cm7 for the droid 3!

And with that strap i can remove my main stock rom not just install a 2nd rom on sd card ?
Thanks alot to you and jim and hashcode for your grest work i will make sure to press the thanks button alot when i get on my pc
Sent from my MB865 using XDA App

I'm assuming that like with the razr if you are using the bootstrap with on boot you have to remove it before installing the safe strap version?

Thank you
I knew it was only a matter of time!!!!!!
Thank you guys

A link worth sharing http://hash-of-codes.blogspot.com/p/how-to-safestrap.html , this is the original safestrap for D3 and RAZR done by hashcode , take a look at his blog to understand more about safestrap if you are a noob like me.
but there is only one question i need to understand using this hack can we install roms on the 1st system ( device memory ) or just on the 2nd system ( SD Card ) ?

This is what I have been using instead of the bootstrap, to use my custom ROMS... it will allow you to use your paid version of CWM the way it should be used. You can now go into CWM and select boot to CWM or flash from sdcard while still in android, and it will boot you into CWM and start flashing....
Thanks for all your hard work!
Jim
Sent from my MB865 using xda premium

So essentially, this is a dual boot system of sorts? This allows me to install a custom ROM and run it in Safe mode then go back to my factory ROM by turning off Safe mode?

lilhaiti said:
So essentially, this is a dual boot system of sorts? This allows me to install a custom ROM and run it in Safe mode then go back to my factory ROM by turning off Safe mode?
Click to expand...
Click to collapse
Yes, that pretty much sums it up.

Will this work for something like, flashing a them to the stock rom on the internal system?

same question
lilhaiti said:
Will this work for something like, flashing a them to the stock rom on the internal system?
Click to expand...
Click to collapse
Yea i have same question will this hack help us flash a rom on internal system or just on the 2nd boot

alcatel444 said:
Yea i have same question will this hack help us flash a rom on internal system or just on the 2nd boot
Click to expand...
Click to collapse
This will not work to flash ANYTHING to your internal system. It will only flash to the safe system.

Got it thanks!!!

MOD please sticky this thread.

lfaber06 said:
MOD please sticky this thread.
Click to expand...
Click to collapse
great works，and thanks for that

lfaber06 said:
*************************************************************I found a bug in the safestrap that prevents us from being able to wipe the * *dalvik cache, I beleive it is in the way i set up the partitions, I will have a re-work and a new apk out by tomorrow night hopefully********************* 1/4/2010*****************************************************************************************************************
Click to expand...
Click to collapse
great work man
but is it ... 2012 ?

Should I wait to setup safestrap until you get this fixed, or can I go ahead with it and just replace the .apk later?

mathk said:
great work man
but is it ... 2012 ?
Click to expand...
Click to collapse
Opps... lol
Calundle said:
Should I wait to setup safestrap until you get this fixed, or can I go ahead with it and just replace the .apk later?
Click to expand...
Click to collapse
I'm working on it now so it'd probably be easier to wait.

[Stock][ROM]CWM Flashble Stock Rom

Hi EveryBody
As The Title Says
It A Stock XXLA2 Rom And Its Flashble Via CWM !
Why Did I Make This ?!
Because It Annoying To Flash A Rom Via Odin Every Time You Want To Revert Back
Stock
How To Flash It :-
1-Download CWM From HERE
2-Go To Recovery By Pressing And Holding Power + Home + Volume up button
3-Press Instal Zip From SD
4-Select CWM_bla_bla.zip
5-Now Press Install Zip From SD
6- Flash The Rom
7- If You Faced Problams Like BootLoop WipeData\Cache
Download
XXLA2
http://www.mediafire.com/?72z63q9rqh7wep9
----------------------------
Notice :- I Copied The Installer Script For weUI Rom So In The Installing Procces
It Will Say Installing weUI
Thx For sgy.Creed
​

huh ?
anyone can make a nandroid backup of any stock ROM.
what is the "development value" in this ?

This is official stock Rom ???
If yes...
That's grate....
Sent from my GT-S5360 using xda premium

MrOnline said:
Hi EveryBody
As The Title Says
It A Stock XXLA2 Rom And Its Flashble Via CWM !
Why Did I Make This ?!
Because It Annoying To Flash A Rom Via Odin Every Time You Want To Revert Back
Stock
How To Flash It :-
1-Download CWM From HERE
2-Go To Recovery By Pressing And Holding Power + Home + Volume up button
3-Press Instal Zip From SD
4-Select CWM_bla_bla.zip
5-Now Press Install Zip From SD
6- Flash The Rom
7- If You Faced Problams Like BootLoop WipeData\Cache
Download
XXLA2
http://www.mediafire.com/?72z63q9rqh7wep9
----------------------------
Notice :- I Copied The Installer Script For weUI Rom So In The Installing Procces
It Will Say Installing weUI
Thx For sgy.Creed
​
Click to expand...
Click to collapse
Man... Everyone who flashes a rom keeps a backup in hand. Evn a noob knows dat.
Sent from my GT-S5360 using XDA

hell_lock said:
Man... Everyone who flashes a rom keeps a backup in hand. Evn a noob knows dat.
Sent from my GT-S5360 using XDA
Click to expand...
Click to collapse
And sometimes the backups get deleted when you want free space and decide you don't need the backup anymore... I always delete my backups when I know I no longer need them.
Messed up for me anyway. Still had the custom boot animation and status bar after flashing and no homescreen, was just a black screen with a notification bar. Setup wizard force closed. Restored my backup after about a minute. Will stick to Odin...
Sent from my GT-S5360 using XDA

ROFLkopter said:
Messed up for me anyway. Still had the custom boot animation and status bar after flashing and no homescreen, was just a black screen with a notification bar. Setup wizard force closed. Restored my backup after about a minute. Will stick to Odin...
Sent from my GT-S5360 using XDA
Click to expand...
Click to collapse
agreed... well for me, ODIN still reliable.. cheers

Doesnt work. Did you just replace system folder in WeUI ROM? Stuck at boot logo when data and cache is wiped. Doesnt stick if data cache isnt wiped.

this is what CWM looks like
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Can u make a stock dxlf2 flashable rom too?
Sent from my GT-S5360 using xda app-developers app

mai77 said:
this is what CWM looks like
Click to expand...
Click to collapse
How did you take screen shot in cwm?
Sent from my GT-S5360 using Xparent ICS Tapatalk 2

m.h.mahadi said:
How did you take screen shot in cwm?
Sent from my GT-S5360 using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
dalvik manager and adb screenshot (yes, recovery is adb compactible)

why is it that the first post states that this is xxla2, when it turns out, this is jpla1, meaning there are no european languages in it.

Can you share the stock kernal flashable

I know this is an old thread but I found 5360L sitting around that was stuck in bootloop so I tried this rom and now I get "Encryption Unsuccessful" message, wipe data did not solve the problem, phone not recognized by Odin. Any suggestions?

Apexseal said:
I know this is an old thread but I found 5360L sitting around that was stuck in bootloop so I tried this rom and now I get "Encryption Unsuccessful" message, wipe data did not solve the problem, phone not recognized by Odin. Any suggestions?
Click to expand...
Click to collapse
Formate all partions to rfs then install cyogenmod 9.1 trust me i knew person with this problom before and it fixed his phone

Skunkser said:
Formate all partions to rfs then install cyogenmod 9.1 trust me i knew person with this problom before and it fixed his phone
Click to expand...
Click to collapse
bro,cyanogenmod 9.1 need to install by an ext4 cwm (cwm v5.0.2.8) and formatting to rfs won't help you . install cm9.1 can fix a phone is an impossible thing,except if there's magic .

vdhero said:
bro,cyanogenmod 9.1 need to install by an ext4 cwm (cwm v5.0.2.8) and formatting to rfs won't help you . install cm9.1 can fix a phone is an impossible thing,except if there's magic .
Click to expand...
Click to collapse

[ROM][Flo][7/5/15] - Stock Rooted 5.1.1 - LMY48G - Root and BusyBox only!

AS the name implies this is a stock rooted Android 5.1.1 - LMY48G Lollipop ROM!
Features
100% Stock
Rooted / Powered by SuperSU by @Chainfire!
Busybox
FSTRIM on install
Zip Aligned
No other edits
Notes:
Should update bootloader. It is attached as a flshable ZIP.
First boot is a loooooooooooong time! About 5 to 7 minutes!
You must be on Latest TWRP to enjoy this ROM. No other recoveries supported however they may work.
Install:
Copy ROM to storage
Reboot to TWRP recovery
Factory Reset (no other wipes needed)
Flash ROM
Reboot and Profit!
Troubleshooting
If you get no status bar reboot to recovery and clear all cache. If that doesn't work try flashing the factory image then flash TWRP again and then this ROM.
Getting Symlinks failed during install? Make sure /system is unchecked in TWRP mounts
Problems with internal storage? Look at THIS POST for fix by @freakzapster
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you appreciate my time and effort please consider a small (or large) donation
A little bit goes a long ways!
Please hit Thanks!
MOD EDIT: Link removed as domain has expired. Thread closed until new links can be installed​

Sharing Policy
You are free to use this ROM or any part of this ROM any way you like as long as you give proper credit!
Consider this your permission! Please do not PM me asking if its OK to build off this ROM. Permission granted!
Hit Thanks!

Looks like the Nexus Trolls are at it again! In case you dont know the trolls are jealous hateful people with no skills that go around rating everyone's thread 1 star. I really kind of feel sorry for these sad little creatures One day they may seek the therapy they need (and move out of there parents basement).
But untill then...
Can I get everyone to thank the Opening Post and rate it 5 stars?

Oh snap! Donation coming your way when I get paid

scrosler said:
AS the name implies this is a stock rooted Android 5.1.1 - LMY47V Lollipop ROM!
Features
100% Stock
Rooted / Powered by SuperSU by @Chainfire!
Busybox
Init.d Support
FSTRIM on install
Zip Aligned
No other edits
Notes:
Should update bootloader. It is attached as a flshable ZIP.
First boot is a loooooooooooong time! About 5 to 7 minutes!
You must be on Latest TWRP to enjoy this ROM. No other recoveries supported however they may work.
Install:
Copy ROM to storage
Reboot to TWRP recovery
Factory Reset (no other wipes needed)
Flash ROM
Reboot and Profit!
Troubleshooting
If you get no status bar reboot to recovery and clear all cache. If that doesn't work try flashing the factory image then flash TWRP again and then this ROM.
Getting Symlinks failed during install? Make sure /system is unchecked in TWRP mounts
Problems with internal storage? Look at THIS POST for fix by @freakzapster
If you appreciate my time and effort please consider a small (or large) donation
Did you know that there have been over 20,000 Stock Rooted ROMS downloaded just since Android 5.0.0? Thats not counting every version before 5.0.0!
Please consider donating that way I can focus on making new ROMS and always bringing you the latest versions of Android FIRST!
A little bit goes a long ways!
Please hit Thanks!
Download HERE!
​
Click to expand...
Click to collapse
Been waiting to give this a test drive...
Cheers...

i flashed the factory image thru flashfire.. and viola.. my root still there
Sent from my H940 using XDA Premium 4 mobile app

Dirty flash over Scott's 5.1 with cache / Davlik clear appears to work fine.

My magnetic screen off sensor is not working after the update. Flashed this zip but I'm quite sure it's not the problem of the zip. Anyone else?

paulbonner said:
Dirty flash over Scott's 5.1 with cache / Davlik clear appears to work fine.
Click to expand...
Click to collapse
Worked for me too. Thanks Scott! :good:

The Download site seems to be down at present.

yonster said:
The Download site seems to be down at present.
Click to expand...
Click to collapse
Not for me. Just downloaded and flashed fine
-> Sent from my mind to your screen

mindmajick said:
Not for me. Just downloaded and flashed fine
-> Sent from my mind to your screen
Click to expand...
Click to collapse
Thanks. Downloading now through a VPN. The site didn't seem to like my IP.

Trolls lost! lol

Rated thread and Thanks left. I was happy to return the N7 back to you but i'm missing it already....lol
I did pick up the LG GPad 7.0 from Sprint for free but its not even close to the N7. Enjoy the rom everyone and thanks again for your work Scott

ImjuzCY said:
My magnetic screen off sensor is not working after the update. Flashed this zip but I'm quite sure it's not the problem of the zip. Anyone else?
Click to expand...
Click to collapse
Nope, everything's ok here. So it seems not be ROM related.

paulbonner said:
Dirty flash over Scott's 5.1 with cache / Davlik clear appears to work fine.
Click to expand...
Click to collapse
it works for me too!!!

All good here. Nice job.

Thanks guys, we are beating the trolls :good:

Thanks Scott you always have your Roms up quick need to get this flashed I just flashed 5.1 not a week ago finally got the notice for update lol

Any tried whether CWM is ok to flash this rom?