[Q] Bluetooth on ICS - T-Mobile myTouch 4G Slide

I can not get bluetooth to work at all on any of the ICS roms that I've tried. Is there a problem in the kernels of these, or is it ICS itself that is being problematic? Particularly, I want to get sixaxis and bluetooth file transfers working. Bluetooth audio is irrelevant to me.
Any and all information on the subject would be appreciated.
Currently on Pyroice 1.1.2 with the slight UV kernel and the Adreno patch.

Pyroice is a sense based rom. This issue was talked about a while ago, Sense isn't compatable with 6Axis.
Sent from my HTC myTouch_4G_Slide using Tapatalk

when transfering files i always get a force close as soon as i try to send but if you dont press the "OK" button it will still send.

AgentCherryColla said:
Pyroice is a sense based rom.
Click to expand...
Click to collapse
Um... No it isn't. I'm using the other version that isn't sense. I also can't get it working on the CM9 alpha, and if I use CM7 with the OC kernel, it also doesn't work. I can't do file transfers over bluetooth either. Bluetooth just turns itself off after trying for a few seconds to turn itself on.

pyro ice desensed is still based on sense. hence "desensed". turn your bluetooth on in settings. select who you want to pair with. i use es file explorer to transfer by long pressing whatever file you are trying to send. a force close window will pop up DO NOT SELECT OK. on other device you need to accept the file, wait until it completely downloads then you can press ok

What mattlowry said.
Hastily spouted for your befuddlement.

mattlowry said:
pyro ice desensed is still based on sense. hence "desensed". turn your bluetooth on in settings. select who you want to pair with. i use es file explorer to transfer by long pressing whatever file you are trying to send. a force close window will pop up DO NOT SELECT OK. on other device you need to accept the file, wait until it completely downloads then you can press ok
Click to expand...
Click to collapse
I can't get my bluetooth setting to stay in the 'ON' position. It will turn itself off right after I turn it on. Also, if that works for sending files, is there a way to make it work for receiving files? I would much rather push files to my phone from my PC via bluetooth while I'm at work than try to track down a micro-usb cable.
I'm not trying to sound argumentative here, I'm just looking for help.
Do we know what part of sense is screwing up sixaxis?

Kanerix said:
I can't get my bluetooth setting to stay in the 'ON' position. It will turn itself off right after I turn it on. Also, if that works for sending files, is there a way to make it work for receiving files? I would much rather push files to my phone from my PC via bluetooth while I'm at work than try to track down a micro-usb cable.
I'm not trying to sound argumentative here, I'm just looking for help.
Do we know what part of sense is screwing up sixaxis?
Click to expand...
Click to collapse
No, we don't know what part of sense screws up sixaxis, but it's all sense on every handset, not just ours. I'm looking into it but on another project at the moment.
Sixaxis works fine on cm7 for this phone, so maybe you have a hardware issue.
I also have no problems with file send/receive over bluetooth on sense...
Edit - sorry this is about ICS, forgot that when I was responding about cm7, I haven't done anything with ICS yet.
Sent from my Bulletproof_Doubleshot using xda premium

Blue6IX said:
No, we don't know what part of sense screws up sixaxis, but it's all sense on every handset, not just ours. I'm looking into it but on another project at the moment.
Sixaxis works fine on cm7 for this phone, so maybe you have a hardware issue.
I also have no problems with file send/receive over bluetooth on sense...
Edit - sorry this is about ICS, forgot that when I was responding about cm7, I haven't done anything with ICS yet.
Sent from my Bulletproof_Doubleshot using xda premium
Click to expand...
Click to collapse
Thanks for the info!
Yeah, BT works on CM7, but I'd prefer to work on something newer. On ICS, bluetooth has been very intermittent as to whether it will turn on or not, and if it does, I can't get it to do anything even remotely useful.

Related

Bluetooth apk

Can anyone tell me which bluetooth apk controls pairing and phonebook downloads, and if there is any way to edit it
Thanks
nope
you cannot change the bluetooth file. once its made its made. you would have to make your own and to know all the codes you would need to be a developer. and why would you even want to change bluetooth files?
jordan5555 said:
you cannot change the bluetooth file. once its made its made. you would have to make your own and to know all the codes you would need to be a developer. and why would you even want to change bluetooth files?
Click to expand...
Click to collapse
I have a uconnect car bluetooth, had problems with phonebook downloading, so I renamed bluetoothpbab and no more problems, doesnt even ask to allow phonebook access. Just curious as to what's in the apk
nmandi said:
I have a uconnect car bluetooth, had problems with phonebook downloading, so I renamed bluetoothpbab and no more problems, doesnt even ask to allow phonebook access. Just curious as to what's in the apk
Click to expand...
Click to collapse
I'd really like to know how to read bluetoothpbap.apk if anyone can help
I seem to be having the same problems as you have and am curious if you have had luck resolving them. My Bluetooth won't download the phonebook and frequently disconnects after trying (paired to my car).
I have tried re-pairing and updated my ROM to Phoenix 4.1 when it came out. I didn't have this issue with the stock ROM but it started happening in Phoenix 3.5 and continues in 4.1. This is my only problem with Phoenix and I'd really like to have it fixed.
darkfus said:
I seem to be having the same problems as you have and am curious if you have had luck resolving them. My Bluetooth won't download the phonebook and frequently disconnects after trying (paired to my car).
I have tried re-pairing and updated my ROM to Phoenix 4.1 when it came out. I didn't have this issue with the stock ROM but it started happening in Phoenix 3.5 and continues in 4.1. This is my only problem with Phoenix and I'd really like to have it fixed.
Click to expand...
Click to collapse
Do you have root explorer, if you do, go to /system/app/bluetoothpbap.apk and rename to bluetoothpbap.apk.bak. reboot your phone and pair again with your car. It worked for me. Let me know if it works for you
nmandi said:
Do you have root explorer, if you do, go to /system/app/bluetoothpbap.apk and rename to bluetoothpbap.apk.bak. reboot your phone and pair again with your car. It worked for me. Let me know if it works for you
Click to expand...
Click to collapse
I tried your fix and gave it a day or two to make sure it kept working every time. It does! Thanks!
I am not sure what that module does, but I'm not missing anything noticeable. Thanks Again!
darkfus said:
I tried your fix and gave it a day or two to make sure it kept working every time. It does! Thanks!
I am not sure what that module does, but I'm not missing anything noticeable. Thanks Again!
Click to expand...
Click to collapse
Happy it worked for you
Sent from my SGH-I897 using XDA App

[MOD] Bluetooth Voice Dialer - Compatible With Any Rom

All credit goes the great mike1986. as this was taken from his thread.
Thanks to him Ive successfully been able to fix the bluetooth voice earpiece feature that was not working on the Rom in the signature.
Ive flashed my share of Froyo Roms and it seems that a lot of them have the same problem as well as some Gingerbread maybe.
The idea is to push the call/end button on your bluetooth connected earpiece to do various call related features without having to grab your phone, its all controlled via voice command.
Many people have been looking for a fix for this.. well here it is.
Directions:
Flash via CWM, reboot and you should have the feature fully functional.
*More information on what this does here: http://www.androidtapp.com/true-hands-free-driving-and-bluetooth-voice-dialing-is-in-android-2-2/
Additionally here is a video on the Voice Actions for Android, NOTE: This is different from the Bluetooth Voice Dialer as it has additional features
http://www.youtube.com/watch?v=tPPcTN5sdX4
and
http://www.youtube.com/watch?v=8Ml34vtrGwc
Wow, this is fantastic. I was following the info posted in that AR 3.2 thread, so I'm happy to see something posted.
I'll give this a try tonight.
legend221 said:
Thanks to him Ive successfully been able to fix the bluetooth voice earpiece feature that was not working on the Rom in the signature.
Click to expand...
Click to collapse
I'm running RCMix 5.3 and the BT voice dialer works alright for me. Do I need this fix? The one thing I'd really like from the current ROM for BT voice dialing is to have a tone to cue me when the applet is ready to listen.
BillTheCat said:
I'm running RCMix 5.3 and the BT voice dialer works alright for me. Do I need this fix? The one thing I'd really like from the current ROM for BT voice dialing is to have a tone to cue me when the applet is ready to listen.
Click to expand...
Click to collapse
Thats exactly what this does, install and you'll see this for yourself mate.
Sent from my fast / stable HTC Inspire 4G
I am running AR 5.1.3. Voice dial works fine from the phone but when I try to initiate it from my bluetooth headset I get a Force Close of processcom.android.voicedialer. I uninstalled voice dialer with TB and then installed the bluetooth voice dialer from this thread via CWM and I still get the force close when initiating from my bluetooth.
Any ideas on how I can fix this other than flashing a new rom?
Okay I just flashed to LeeDroid which claims to have fixed the Bluetooth Voice Dial Problem and I still get a force close when initiating it from my headset.
Anyone have any ideas please????
Wow this is cool to have. Im not having much accuracy though. Ive got a 2 year old Jawbone Prime so my bets are that its the problem. Looks cool but hasnt played nice since day one. Anyhow this does work if you got a decent headset
Did you ever figure this out?
toadleyb said:
Okay I just flashed to LeeDroid which claims to have fixed the Bluetooth Voice Dial Problem and I still get a force close when initiating it from my headset.
Anyone have any ideas please????
Click to expand...
Click to collapse
svarzaru said:
Did you ever figure this out?
Click to expand...
Click to collapse
I'm having the same problem and would really like to see this fixed. When I tap the voice dialer app on the phone, it works as it should. However, it always FC when pressing the bluetooth button. I think the settings file associated with connecting the bluetooth button to the app is the problem, but I don't know what file it is or how to make it better.
xperi said:
I'm having the same problem and would really like to see this fixed. When I tap the voice dialer app on the phone, it works as it should. However, it always FC when pressing the bluetooth button. I think the settings file associated with connecting the bluetooth button to the app is the problem, but I don't know what file it is or how to make it better.
Click to expand...
Click to collapse
Download Cyberon Voice from the market. It does cost a couple of bucks but it makes all problem go away on every rom you need BT with. At least for me it did!
Confirmed working with Virtuous Unity 1.24.0 Sense 3.0 based on Pyramid with Vlingo
Man just what I was looking for will give it a try.....Thanks
Sent from my Inspire 4g using XDA Premium App
missing voice dialer
I tried to flash it, and it didn't do anything. I'm using Virtuous Unity v1.27.0. I even tried to extract the app from the zip (which currently doesn't exist on my phone) and install that way, but it says "application not installed". Nothing happens at all when i hit the button on my bluetooth. With the stock rom, before installing VU, it would pull up the voice dialer. But i can't even install it now. Can anyone help me out? Thanks!
EDIT: Got it to install, but now it force closes when I try to use it, with or without a bluetooth headset.
awesome!!!!!
I'm running AHD 6.1 but it lacks the ability to let bluetooth headset to do voice command. but after i flashed this it worked out fine!!
and btw im using vlingo to do voice dialing, its an awesome app!!
legend221 said:
All credit goes the great mike1986. as this was taken from his thread.
Thanks to him Ive successfully been able to fix the bluetooth voice earpiece feature that was not working on the Rom in the signature.
Ive flashed my share of Froyo Roms and it seems that a lot of them have the same problem as well as some Gingerbread maybe.
The idea is to push the call/end button on your bluetooth connected earpiece to do various call related features without having to grab your phone, its all controlled via voice command.
Many people have been looking for a fix for this.. well here it is.
Directions:
Flash via CWM, reboot and you should have the feature fully functional.
*More information on what this does here: http://www.androidtapp.com/true-hands-free-driving-and-bluetooth-voice-dialing-is-in-android-2-2/
Click to expand...
Click to collapse
Will this work with Gingerbread ROMs? mike1986's current DHD/Inspire4G ROM does not support voice dialing via bluetooth. Kind of a pain in the rear not having it!
crypted said:
Will this work with Gingerbread ROMs? mike1986's current DHD/Inspire4G ROM does not support voice dialing via bluetooth. Kind of a pain in the rear not having it!
Click to expand...
Click to collapse
The post before yours says they're running "AHD" 6.1 with this dialer and it works fine. I'm assuming this was supposed to be ARHD 6.1 which is a GB ROM
homeslice976 said:
The post before yours says they're running "AHD" 6.1 with this dialer and it works fine. I'm assuming this was supposed to be ARHD 6.1 which is a GB ROM
Click to expand...
Click to collapse
Yeah, I wasn't clear. I figured it would work since it worked on the one before, but I wasn't sure if the previous post was confirming 6.1.0 or 6.1.1. So, I'm hoping for 6.1.1 support confirmation so I don't brick this puppy.
crypted said:
Yeah, I wasn't clear. I figured it would work since it worked on the one before, but I wasn't sure if the previous post was confirming 6.1.0 or 6.1.1. So, I'm hoping for 6.1.1 support confirmation so I don't brick this puppy.
Click to expand...
Click to collapse
6.1.0 was the first version of his new base (2.3.5GB based on HTC 3.06.405.1)
6.1.1 is the same base with updates/enhancements from mike1986. I can't imagine this would bork you. If you're too worried, make a backup. This isn't going to brick your phone to a point where you can't get to recovery and flash your backup
homeslice976 said:
6.1.0 was the first version of his new base (2.3.5GB based on HTC 3.06.405.1)
6.1.1 is the same base with updates/enhancements from mike1986. I can't imagine this would bork you. If you're too worried, make a backup. This isn't going to brick your phone to a point where you can't get to recovery and flash your backup
Click to expand...
Click to collapse
Right. That was my assumption and my plan once I got home tonight to do that assuming no-one confirmed it for me. Will flash after while and edit post with results.
I flashed this to arhd 6.1.1. It don't work. App did not appear to be installed. I tried installing the apk and it would just say application not installed.
So it appears to be a no go.
Sent from my HTC Inspire 4G using XDA App

[MOD by APP] Nebtop - Universal HDMI Webtop hack

This MOD by APP is different than the existing MOD by replacing system apks:
1. No risk of brick
2. Ease of use
3. Universal hack for phones and ROMs that has Webtop
Since this app is intended to support multiple devices, see the original post from the Razr thread http://forum.xda-developers.com/showthread.php?t=1404625 .
Please report the test result in this thread. Whether success or fail and your device, ROM, etc.
It'd be nice to use the "Send" option in the app if it failed.
Thanks!
Nice find! I hope this does work.
Sent from my MB865 using xda premium
great work.although my Atrix2 is soft brick,.
Hope there will be firmware upgrade soon so that you can recover from it.
This is also why I tried to do this for my own use in the first place. I'm afraid of soft bricking the Razr too.
fantasy_gu said:
great work.although my Atrix2 is soft brick,.
Click to expand...
Click to collapse
fantasy_gu said:
great work.although my Atrix2 is soft brick,.
Click to expand...
Click to collapse
Did this soft brick your phone?
Sent from my MB865 using xda premium
I think fantasy_gu is saying that he would love to try this but his phone is already softbricked from a previous issue
Got myself an HDMI cable today finally
I installed the mod on my Stock-rooted Atrix 2 and I can confirm it is working
The only thing I missed was the by the Webtop-help advertised "Entertainment Center" (This would probably be the more useful feature for me personally )
regards
Preggy
i get a screen pop up but doesn't say webtop. Just says view calendar agenda or dismiss option. Not sure what to do. I want the same thing i can do to TV on my laptop.
Sent from my MB865 using xda premium
How do you connect your phone to the Laptop???
Can your laptop receive HDMI input signal?
holeshot77 said:
i get a screen pop up but doesn't say webtop. Just says view calendar agenda or dismiss option. Not sure what to do. I want the same thing i can do to TV on my laptop.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
As a person who has used this!!!
Just a word of warning:
This app totally screwed up my phone. I installed it and was using it just fine for a couple of hours. Then all of a sudden, the phone becomes unresponsive. I unplugged the HDMI cable, and it rebooted. I didn't think anything of this. Just found it a little odd. Since then, any time I reboot the phone, it is reverted to the same state it was in right before the crash. The text message I had not yet read is re-received as new. All app updates are reverted. All new apps aren't installed. All new texts (since then) are gone. Apps are force-closing left and right. Be VERY careful with this app. I'm not sure it's really ready for prime-time, even now.
I know that you've experienced this a few days ago from my routine Googling but didn't know you haven't find a way back yet.
As from your original post, you were using Webtop at that moment and all in a sudden with the HDMI cable unplugged, then the phone rebooted.
At least a panic log is needed to verify whether this is related to Nebtop, or the stock ROM+Webtop.
As Nebtop has no listening of the HDMI cable plugging/unplugging event, it should had done nothing at that moment.
And your current state sounds like the file system is corrupted. If I have no way to fix this, I would try to backup the current state first, then try to revert to the stock. (not sure if Atrix 2 has any stock image leaked )
Finally, I'd like to help to identify the actual cause of the reboot, only if you could look up the kernel panic log at this location /data/dontpanic/apanic_console (this is the path for one of the Motorola phone, it could be changed for Atrix 2).
mlo0352 said:
Just a word of warning:
This app totally screwed up my phone. I installed it and was using it just fine for a couple of hours. Then all of a sudden, the phone becomes unresponsive. I unplugged the HDMI cable, and it rebooted. I didn't think anything of this. Just found it a little odd. Since then, any time I reboot the phone, it is reverted to the same state it was in right before the crash. The text message I had not yet read is re-received as new. All app updates are reverted. All new apps aren't installed. All new texts (since then) are gone. Apps are force-closing left and right. Be VERY careful with this app. I'm not sure it's really ready for prime-time, even now.
Click to expand...
Click to collapse
I already have the webtop mod posted by Fenny, what is the difference with this one? Does this one work through a runtime + mirror? It allows on screen touch and keyboad?
The feature of Nebtop is pretending the HD Dock.
The requirement to use Nebtop is a rooted phone.
The disadvantage of Nebtop is none so far, therefore the advantages are no persistence change, no intrusive modification to anything, no risk of brick.
Yes, like using the HD Dock, the on screen touch and keyboard is working by using Nebtop.
dudemaaan said:
I already have the webtop mod posted by Fenny, what is the difference with this one? Does this one work through a runtime + mirror? It allows on screen touch and keyboad?
Click to expand...
Click to collapse
Can I install nebtop over my existing hack by fenny? I have no onscreen touchscreen or mouse control with the fenny hack. Also I can't seem to find the xorg.conf file anywhere, I'm on the supercharged v5 rom. Based on 2.3.6
I haven't tried personally.
Nebtop could only make it work if it would work for a real HD Dock.
dudemaaan said:
Can I install nebtop over my existing hack by fenny? I have no onscreen touchscreen or mouse control with the fenny hack. Also I can't seem to find the xorg.conf file anywhere, I'm on the supercharged v5 rom. Based on 2.3.6
Click to expand...
Click to collapse
well i installed nebtop on v5 supercharged rom and its working fine, replying now from nebtop using the on screen keyboard and mouse. only thing i notice is i cant use the mobile apps from nebtop, probably because the keyboard is using the screen. atrix 2
I'm not sure what do you mean by "cant use the mobile apps from nebtop".
Do you mean from Webtop? Have you watched the video I've made? Maybe I can imagine better if you would tell the difference(not can vs can't but some concrete examples....like when clicking on the "Phone Manager", there is no response....or the "Phone Manager" window is blank...etc) you see.
dudemaaan said:
well i installed nebtop on v5 supercharged rom and its working fine, replying now from nebtop using the on screen keyboard and mouse. only thing i notice is i cant use the mobile apps from nebtop, probably because the keyboard is using the screen. atrix 2
Click to expand...
Click to collapse
400757 said:
I'm not sure what do you mean by "cant use the mobile apps from nebtop".
Do you mean from Webtop? Have you watched the video I've made? Maybe I can imagine better if you would tell the difference(not can vs can't but some concrete examples....like when clicking on the "Phone Manager", there is no response....or the "Phone Manager" window is blank...etc) you see.
Click to expand...
Click to collapse
Phone manager was blank in webtop. I could see the tabs such as text messaging and adw launcher but no display. This was happening both when launching via nebtop and also via fenny hack. I did a phone restart and the problem went away so everything works perfect now.
The only other thing I noticed is the phone seemed to get extra hot, though the phone seems to run a bit on the hot side anyway so its probably normal.
One difference that I notice between fenny and nebtop is nebtop says connected to HD display and fenny hack says connected to HDMI cable. This is probably why the trackpad and mouse work in nebtop and not with the fenny hack.
Yeah, this and nebtop don't work for me. Nothing pops up so I can view my phone on my HP laptop. I did the adb push and stuff. No go. I don't get the option for Webtop.
At least, this is my understanding of this? To use it on your laptop without a dock-right?
holeshot77 said:
Yeah, this and nebtop don't work for me. Nothing pops up so I can view my phone on my HP laptop. I did the adb push and stuff. No go. I don't get the option for Webtop.
At least, this is my understanding of this? To use it on your laptop without a dock-right?
Click to expand...
Click to collapse
Nope, this is so that you can connect your phone to say a monitor or TV with an HDMI cable and use the phone to control webtop.

Definite issue with BT media and ICS ROMs

FYI, there is an issue with pretty much all ICS ROMs and the BT stack included in them. I have a brand new, top of the line Jawbone BT that supports everything, works flawlessly in Cyanogen and non-ICS ROMs, but will barely work in ICS.
Basically, after a reboot, it connects and says Connected (no media), then switches to Connected. Everything works fine until I disconnect and reconnect again.
After that, it will work for only voice calls. Media will always go out the speaker. I have tried everything to fix it to no avail. The only resolution to get A2DP media streaming back is to reboot.
When it happens, the media checkbox is still there and checked, but it doesn't work. I switched back to HyperSensation (Cyanogen) and everything works as it is supposed to.
Apparently ICS bluetooth works fine for some BT headsets and not others. This also seems to be an ongoing problem for other phones as well, even non-ICS.
I am not well versed in reading the debug logs, but if anyone is interested I can post them here, provided they tell me which ones they want.
I'm having troubles to. My problem is I cannot start a call via the Bluetooth Dial button on my radio. It's as if the phone doesn't even recognize that you are pressing the button. Tried installing Vlingo, but the prompt doesn't even work anymore.
The old solution was to install the Voice_dialer.apk...but that doesn't seem to be compat either
I can confirm the issue with the virtuous ICS as well. I have bt stuff from Jawbones to BlueAnt's and all have the same issue. Prior to this was the issue of cutting out and now it's the off/on bt streaming. To "fix" the issue, is to reboot. Annoying yes. But ICS is still so sexy
I've got the same problem, ROM Elegancia ICS 1.0.6 and 1.1.0
After pairing with bluetooth headset, first time I play music everything is ok. after re-connecting, music controls works ok, but sound is thru phone's speakear not thru the headset.
After rebooting the phone the situation is the same- first connection everythings ok, another ones not.
Checked with SE MW600, Jabra extreme and car's bluetooth.
The problem occurs even with clear installation (before I restore backups).
Still can not find solution so I got back to GB.
So its not just me! I can confirm that my Beats Wireless acts exactly like described.. And with a reboot fixing it again!
I think the devs here might be able to fix it, but its properly not going to be an importent issue to fix.. Fingers crossed for a fix, or maybe the future leaks will have it done!
Sendt fra min HTC Sensation Z710e med Tapatalk
ftblstr2319 said:
I'm having troubles to. My problem is I cannot start a call via the Bluetooth Dial button on my radio. It's as if the phone doesn't even recognize that you are pressing the button. Tried installing Vlingo, but the prompt doesn't even work anymore.
The old solution was to install the Voice_dialer.apk...but that doesn't seem to be compat either
Click to expand...
Click to collapse
Vlingo has always been problematic for me... My solution (worked on ICS too) was to get it working on an older ROM (not sure which one anymore) then use titanium backup and back up APP+DATA on a ROM that it is working on. Then, restore APP+DATA on the new ROM.
The first time you hit the button on your headset it will ask you what app you want to use for voice dialing and give you Vlingo, Vlingo InCar, or Voice Search. Choose Vlingo and check the box to make it default and you are good to go.
Just make sure after you get it working on the new ROM to back it up again... then the next time you switch ROMs, restore whatever the latest backup is. I am not sure what it changes, but I have been through Cyanogen, all of the ARHD versions, all of the InsertCoin versions, and a few others (I can never make up my mind on ROMs) and this trick has worked in all of them.
IMPORTANT: Make sure in Titanium Backup to uncheck the option to restore system libraries in ROM (that can cause issues going between major versions of android), and make sure toenable the features in Titanium Backup for attempting to migrate data.
I also get the same issue when I try to connect my MW-600 with ARHD ICS 6.0.2.
Can anyone help?
You guys who just have to reboot your phone are getting off easy. When I lose Audio Streaming to my car head unit, I have to delete the device and re-pair it to my phone after a reboot.
Same here with mw600 on virtuous Inquisition 2.0.1. Only first connection plays music through headset.
I am sure that first 4.0.1 beta base was not affected. This bug came with 4.0.3
Sent from my HTC Sensation using Tapatalk
dante-fu said:
Same here with mw600 on virtuous Inquisition 2.0.1. Only first connection plays music through headset.
I am sure that first 4.0.1 beta base was not affected. This bug came with 4.0.3
Sent from my HTC Sensation using Tapatalk
Click to expand...
Click to collapse
really??.. Im gonna try an old backup then.
Edit:
Backup was removed sadly.. :/ cant test it, but maybe someone else can?
Well, the ROMs are still there to download
With 4.0.1 I was on radio version 10.59. I am not expert on radios and RILs but I guess these things affect also BT performance. Right?
Sent from my HTC Sensation using Tapatalk
Shidapu said:
really??.. Im gonna try an old backup then.
Edit:
Backup was removed sadly.. :/ cant test it, but maybe someone else can?
Click to expand...
Click to collapse
I reverted back to the virtuous 4.0.1 build from the most recent (having the new fw and radio) and has fixed the Bluetooth issue. Now I just have to live with messed up signal bars and a browser that randomly exits.
Sent from my HTC Sensation using xda premium
Hi,
Reporting this BT issue for me (SGS 2 with ICS 4.0.3, XXLP2 that can be found on XDA, originally from samfirmware):
I try to send files from my laptop to my SGS 2, 1 at a time and the transfer will suddendly halt some of the way through and ICS looks like it's rebooting but it's actually not, I mean not a full proper reboot; the phone does not switch off, the boot anim plays as if restarting, first BT is off then the icon come up in the top bar...
Hopefully, the Simple & Clean, ICS version, is round the corner ;o)
beng
using arhd 6.1.1 here on sensation XE with SE mw600 headset, no issues, calls and media working as normal
BT connectivity seems to be fixed in the latest leaked ICS + Sense RUU.
Is the sensation supposed to support any other remote control features than pause and play over BT?
I can confirm that on my Galaxy s2 using the 'official' ICS rom released yesterday still causes my phone to reboot.
This happens when bluetooth is paired with my car stereo and streaming audio or voice calls. It causes a reboot, usually happens after 10-15 minutes.
Never happened on gingerbread of any version. And has happened on all versions of ICS leading up to 'official' release.
I can confirm that bluetooth will cut off and be off completely quite randomly while listening to music or Pandora.
Only a reboot gets bluetooth to turn back on.
I have experienced this on two Motorola S9-HD headsets on various ICS roms
Sent from my HTC Sensation Z710e using Tapatalk

[Q] Bluetooth Issue - All Jellybean ROMs - All Kernels

Can someone please help me with this. I really want to update to Jellybean but I have the most annoying bluetooth issue on every ROM I have tried.
I have tried all JB ROMs and standard Kernel and the Sultan Kernel. I have asked in a couple of the ROM threads but got no reply.
The issue is when I connect to my car it takes 5 seconds for the sound to transfer from the phone internal speaker to the bluetooth in my car.
Use my phone for work and can't wait 5 seconds in the car when I receive a call before I can hear the other end of the conversation.
It worked perfectly on my old ICS ROM.
Anyone encounter this or know how to fix it?
Thanks a million for help!
turn your phone s-off if u ain't.
:-??
------------------------------------------------
PRESS THE PRETTY "THANKS" BUTTON IF I HELPED
Sent from a shaked up HTC Sensation XE using xda premium
lassykk said:
Can someone please help me with this. I really want to update to Jellybean but I have the most annoying bluetooth issue on every ROM I have tried.
I have tried all JB ROMs and standard Kernel and the Sultan Kernel. I have asked in a couple of the ROM threads but got no reply.
The issue is when I connect to my car it takes 5 seconds for the sound to transfer from the phone internal speaker to the bluetooth in my car.
Use my phone for work and can't wait 5 seconds in the car when I receive a call before I can hear the other end of the conversation.
It worked perfectly on my old ICS ROM.
Anyone encounter this or know how to fix it?
Thanks a million for help!
Click to expand...
Click to collapse
It could be a device incompatibility with the blue tooth receiver.
There are a few devices that just don't work right with the JB roms even though bluetooth does work. For instance on both Bruce's ROM and the offical CM10 rom, I don't have this problem. So it CAN work. But like I said there ar enumerous people who have had issues that turned out to be some kind of issue with the device not communicating well with JB.
It could still be an issue with your phone though. Do you have any apps that might interfere with bluetooh like an automatic volume up app when blueooth connects or something like that? If so, delete all that stuff. See if the results improve.
Do you have another bluetooth device you can test it with? At lest we could narrow down if it's a reciver issue or a ROM issue.
Also try doing a fresh install after a full wipe. Then just boot it up and try it. Don't install anything else. Just see if you have the problem on a completely clean install. If you don't, you might have an app interference issue.
Skipjacks said:
It could be a device incompatibility with the blue tooth receiver.
There are a few devices that just don't work right with the JB roms even though bluetooth does work. For instance on both Bruce's ROM and the offical CM10 rom, I don't have this problem. So it CAN work. But like I said there ar enumerous people who have had issues that turned out to be some kind of issue with the device not communicating well with JB.
It could still be an issue with your phone though. Do you have any apps that might interfere with bluetooh like an automatic volume up app when blueooth connects or something like that? If so, delete all that stuff. See if the results improve.
Do you have another bluetooth device you can test it with? At lest we could narrow down if it's a reciver issue or a ROM issue.
Also try doing a fresh install after a full wipe. Then just boot it up and try it. Don't install anything else. Just see if you have the problem on a completely clean install. If you don't, you might have an app interference issue.
Click to expand...
Click to collapse
Hi thanks for replying.
I will try Bruce's ROM but the official CM10 ROM didn't work for me.
I don't have any apps that could be interfering as all I have done whilst testing this problem is do a full wipe, install the JB ROM and go and check the bluetooth.
I will check tonight if the issue exists on another bluetooth device and report back any problems.
Cheers
AW: [Q] Bluetooth Issue - All Jellybean ROMs - All Kernels
Delete please

Categories

Resources