Database Info

BIG Problem updating the wiki!! PLEASE HELP!

HI. Please help me! I wasn't able to modify an article on the WIKI (wiki.xda-developers.com).
All the time I press the "Edit" Button, FireFox give me the option to download the php file :?: :?: :shock: WEIRD
The address I was modifying was:
http://wiki.xda-developers.com/index.php?pagename=List of HimaUpgradeUt.exe Error Code
After trying it several times, I could get inside and edit the page, then I saved it, and now is BLANK!!!!
HEEEEELLPPPP
The contets of the page at the time of my edit were:
--------------------------
ERROR 100: MODEL ID ERROR
Definition: ROM image is not design for the device you are upgrading. It happens when you try to use Himalaya's ROM image into other HTC like MAGICIAN, BlueAngel or Alpine
Solution: Use appropriate ROM Upgrade image for your Device, no two device can share the same ROM
ERROR 101: CONNECTION ERROR
ERROR 102: CE IMAGE FILE CHECKSUM ERROR
ERROR 103: ROM IMAGE FILE NOT FOUND
ERROR 104: CANNOT OPEN ROM IMAGE FILE
ERROR 105: OPEN PORT FAILURE
ERROR 106: EXECUTE REMOTE COMMUNICATION PROGRAM FAILURE
WARNING 111: POWER ADAPTER NOT PLUGGED IN
ERROR 112: CE ROM UPDATE ERROR
ERROR 113: EXTENDED ROM UPDATE ERROR
ERROR 114: RADIO ROM UPDATE ERROR
ERROR 115: INVALID VERSION OF ACTIVESYNC
ERROR:116 GENERAL ERROR
ERROR 117: INVALID MODEL ID
ERROR 120: COUNTRY ID ERROR
ERROR 121: LANGUAGE ID ERROR
ERROR 122: EXTENDED IMAGE FILE CHECKSUM ERROR
ERROR 123: RADIO IMAGE FILE CHECKSUM ERROR
ERROR 130: CREATE CE ROM IMAGE ERROR
ERROR 131: ALLOCATE MEMORY ERROR
ERROR 132: WRITE DATA ERROR
ERROR 133: COMMUNICATION ERROR
ERROR 134: READ CE ROM IMAGE ERROR
ERROR 135: COMMUNICATION ERROR
ERROR 136: COMMUNICATION INTERRUPT
ERROR 137: COMMUNICATION ERROR
ERROR 150: ROM UPGRADE UTILITY ERROR
ERROR 200: WRITE EXTENDED ROM FAIL
Error 201: GET DEVICE DATA ERROR
This error is a bit misleading. The BAUpdate tool is trying to switch the phone into bootloader mode, and the phone for some reason is being uncooperative. This happens to me from time to time. The best, and quickest way around this is to force the phone into Bootloader manually. By pressing the record button, while doing a hard reset (Power + Reset) your phone will enter bootloader mode. You can verify this as the screen will say, Serial, and change to USB when you cradle it.
Once you cradle your phone, Windows will detect it as new hardware, and take a minute or two configure the right driver(Microsoft USB Sync). Once this is complete, you can run the BAUpgrade utility again, and this time you should get past error 201.
Error 202: READ IMAGE ERROR
ERROR 210: CREATE EXTENDED ROM IMAGE ERROR
ERROR 211: ALLOCATE MEMORY ERROR
ERROR 212: WRITE DATA ERROR
ERROR 213: COMMUNICATION ERROR
ERROR 214: READ EXTENDED ROM IMAGE ERROR
ERROR 215 COMMUNICATION ERROR
ERROR 216: COMMUNICATION INTERRUPT
ERROR 310: CREATE RADIO ROM IMAGE ERROR
ERROR 311: ALLOCATE MEMORY ERROR
ERROR 312: WRITE DATA ERROR
ERROR 313: COMMUNICATION ERROR
ERROR 314: READ RADIO ROM IMAGE ERROR
ERROR 315: COMMUNICATION ERROR
ERROR 316: COMMUNICATION INTERRUPT
ERROR 317: COMMUNICATION ERROR

Hi,
I tried it too & have simular probs in changing any wiki page @ the moment. IMHO there's something wrong on the serverside cause the text is still present but compilation into a page fails.
Try again later is my suggestion.
Cheers, M

Yup, I thought it was a temporary problem. Moreover, I'm having the same strange behaviour in some wiki links.
For instance:
http://wiki.xda-developers.com/index.php?pagename=BA_Versions
It is the first link on this page:
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_Upgrade_Radio
Thanks for your answer. I'll try later........
oltp said:
Hi,
I tried it too & have simular probs in changing any wiki page @ the moment. IMHO there's something wrong on the serverside cause the text is still present but compilation into a page fails.
Try again later is my suggestion.
Cheers, M
Click to expand...
Click to collapse

If the problem persists you can always pm 'peter poelman' or another moderator, maybe they can fix it.
The way it is now, we'll have a very empty wiki soon. Luckily the preview shows the same errors & peolpe should be warned by that, so as long as people don't save any changes to a page...

Luckily, I think you can allways get an older version of the page.
Cheers
oltp said:
If the problem persists you can always pm 'peter poelman' or another moderator, maybe they can fix it.
The way it is now, we'll have a very empty wiki soon. Luckily the preview shows the same errors & peolpe should be warned by that, so as long as people don't save any changes to a page...
Click to expand...
Click to collapse

arieltools said:
Luckily, I think you can allways get an older version of the page.
Click to expand...
Click to collapse
Ok learned something again, I didn't know that.

[Custom ROM]RUU_Spark_HTC_Europe_1.20.401.00_Radio_5.54.09.21_ 22.33b.50.10U by ansar

Dear forum members,
YES!!!
I successfully created my 1st custom ROM for the Spark Windows Phone with the new HSPL by cotulla
I used as a base this ROM:
RUU_Spark_HTC_Europe_1.20.401.00_Radio_5.54.09.21_22.33b.50.10U_NoDo_by_ansar
The custom build has the ability to be unlocked and to upgrade to MangoB2 thru zune
In my next build i will try to include mango and dfrouter for those not sync to zune
Thanks to my giant friends ervious, mamaic, bepe and cotulla
I hope to upload it today [edit: done] and some day to create an hspl too!!
///////////////////////////////////////////////
[CRI] Custom ROM Index for Windows Phone Spark
Link RUU_Spark_HTC_Europe_1.20.401.00_Radio_5.54.09.21_22.33b.50.10U_NoDo_custom_by_ansar
This ROM supports:
- Chevron unlock and
- MangoB2 update to 7403 and 7712 and
- does not include SPL in order HSPL to be retained
All other elements are as in stock ROM version RUU_Spark_HTC_Europe_1.20.401.00_Radio_5.54.09.21_22.33b.50.10U_NoDo_by_ansar
///////////////////////////////////////////////
The provided ROM can be flashed to all RSPL / HSPL supported operators:
- hTC_Asia / hTC_Europe / Vodafone_AU / Vodafone_CH-DE / Vodafone_DE / Vodafone_ELL
- Vodafone_FR / Vodafone_NL / Vodafone_NZ / Vodafone_SPA / Vodafone_UK
///////////////////////////////////////////////
The provided ROM cannot be flashed to the not yet supported by RSPL/HSPL operators:
- Spark_W_VERIZON [PC4020000]
///////////////////////////////////////////////
ROM installation instructions
To install the ROM follow these steps:
- install RSPL and select your ROM version X.YY
- install HSPL
- unzip the downloaded zip file and run ROMUpdateUtility.exe
///////////////////////////////////////////////
MangoB2 update instructions
To update in MangoB2 you must in your PC/Laptop:
- download my NoDo_Public_by_ansar.zip and Mangob2_Public_Trial_by_ansar.zip
- uninstall WPSupportTool-x86.msi or WPSupportTool-x64.msi and
- install Setup-UpdateWP-x86.exe or Setup-UpdateWP-x64.exe
- install StartZuneLocal.exe
///////////////////////////////////////////////
MangoB2 Chevron unlock instructions
A. To retain Chevron unlock on MangoB2 in 7403 perform the following in windows phone:
[Optional steps]
- Uninstall Connection Setup after ROM flashing
- Sign in to Windows Live and
1. Run Marketplace, select HTC Apps and select Connection Setup
2. After relevant prompt Power off and then Power on your device
- Repeat above 1 and 2 to install Connection Setup
[End of optional steps]
- Deploy my Unlock_Mango_XBMODDeployer.xap
- Run XBMOD.Files.Deployer and uninstall it
- Deploy TouchXplorer.xap
- Run TouchXplorer and copy CustClear.provxml from My Documents\My Ringtones\ to \Windows
- Remember: do not run Connection Setup now
- Update to MangoB2 7403
- Now run Connection Setup
- Check that you are unlocked by running TouchXplorer
B. To retain Chevron unlock on MangoB2 7712 perform the following in windows phone:
[Optional steps]
- Uninstall Connection Setup
- Run Marketplace, select HTC Apps
- You maybe wait some minutes for Connection Setup to appear
- When Connection Setup appears install it
[End of optional steps]
- Deploy my Update_Mango_XBMODDeployer.xap
- Run XBMOD.Files.Deployer and uninstall it
- Run TouchXplorer and copy CustClear.provxml from My Documents\My Ringtones\ to \Windows
- Run Connection Setup
- Deploy my Unlock_Mango_XBMODDeployer.xap
- Run XBMOD.Files.Deployer and uninstall it
- Run TouchXplorer and copy CustClear.provxml from My Documents\My Ringtones\ to \Windows
- Remember: not run Connection Setup now
- Update to MangoB2 7712
- Wait for update to finish
- Now disconnect from usb cable and enter SIM pin
- Now run Connection Setup
- Check that you are unlocked by running TouchXplorer
///////////////////////////////////////////////
Till next version enjoy!!
Regards, ansar

download http://forum.xda-developers.com/showthread.php?t=1215501 use update and be happy with dev unlocked 7720

damador said:
download http://forum.xda-developers.com/showthread.php?t=1215501 use update and be happy with dev unlocked 7720
Click to expand...
Click to collapse
Yes, I made it - MANGO 7220 works great, but I can not find the backup directory (Polish Windows 7).
"C: \ Users \ <user> \ AppData \ Local \ Microsoft \ Windows Mobile Update," - there is no path!
The second issue: whether this version will update the Mango through Zune? I'm in the Polish Orange and the phone I am with Vodafone GB (unlocked).
Please, let someone explain it to me )

same for me win 7 64 bit - en(us) locale as main - there is no such directory anyway it works -
about zune - this version 7720 should update to mango final without any troubles - all that you need is updated zune client

Thank You for answer
Mam nadzieję, że masz rację - pozdrawiam )

[Custom ROM]RUU_Gold_HTC_Europe_1.24.401.01_Radio_5.65.09.25a_ 22.42.50.21U by ansar

Dear forum members,
YES!!!
I successfully created my 1st custom ROM for the Gold 7 Pro Windows Phone with the new HSPL by cotulla
RUU_Gold_HTC_Europe_1.24.401.01_Radio_5.65.09.25a_22.42.50.21U_NoDo_custom_by_ansar
I used as a base this ROM:
RUU_Gold_HTC_Europe_1.24.401.01_Radio_5.65.09.25a_22.42.50.21U_NoDo_by_ansar
The custom build has the ability to be unlocked and to upgrade to MangoB2 thru zune
In my next build i will try to include mango and dfrouter for those not sync to zune
Thanks to my giant friends ervious, mamaic, bepe and cotulla
I hope to upload it today [edit: done] and some day to create an hspl too!!
///////////////////////////////////////////////
[CRI] Custom ROM Index for Windows Phone Mozart
///////////////////////////////////////////////
Download Link RUU_Gold_HTC_Europe_1.24.401.01_Radio_5.65.09.25a_22.42.50.21U_NoDo_custom_by_ansar
///////////////////////////////////////////////
This ROM supports:
- Chevron unlock and
- MangoB2 update to 7403 and 7712 and
- does not include SPL in order HSPL to be retained
All other elements are as in stock relevant ROM of version HTC_Europe_1.24.401.01_Radio_5.65.09.25a_22.42.50.21U_NoDo
///////////////////////////////////////////////
The provided ROM can be flashed to all RSPL / HSPL supported operators:
- hTC_Europe / O2_DE / TMO_DE / Vodafone_CH_DE
///////////////////////////////////////////////
There are not known, yet, unsupported operators by RSPL/HSPL
///////////////////////////////////////////////
ROM installation instructions
To install the ROM follow these steps:
- install RSPL and select your ROM version X.YY
- install HSPL
- unzip the downloaded zip file and run ROMUpdateUtility.exe
///////////////////////////////////////////////
MangoB2 update instructions
To update in MangoB2 you must in your PC/Laptop:
- download my NoDo_Public_by_ansar.zip and Mangob2_Public_Trial_by_ansar.zip
- uninstall WPSupportTool-x86.msi or WPSupportTool-x64.msi and
- install Setup-UpdateWP-x86.exe or Setup-UpdateWP-x64.exe
- install StartZuneLocal.exe
///////////////////////////////////////////////
MangoB2 Chevron unlock instructions
A. To retain Chevron unlock on MangoB2 in 7403 perform the following in windows phone:
[Optional steps]
- Uninstall Connection Setup after ROM flashing
- Sign in to Windows Live and
1. Run Marketplace, select HTC Apps and select Connection Setup
2. After relevant prompt Power off and then Power on your device
- Repeat above 1 and 2 to install Connection Setup
[End of optional steps]
- Deploy my Unlock_Mango_XBMODDeployer.xap
- Run XBMOD.Files.Deployer and uninstall it
- Deploy TouchXplorer.xap
- Run TouchXplorer and copy CustClear.provxml from My Documents\My Ringtones\ to \Windows
- Remember: do not run Connection Setup now
- Update to MangoB2 7403
- Now run Connection Setup
- Check that you are unlocked by running TouchXplorer
B. To retain Chevron unlock on MangoB2 7712 perform the following in windows phone:
[Optional steps]
- Uninstall Connection Setup
- Run Marketplace, select HTC Apps
- You maybe wait some minutes for Connection Setup to appear
- When Connection Setup appears install it
[End of optional steps]
- Deploy my Update_Mango_XBMODDeployer.xap
- Run XBMOD.Files.Deployer and uninstall it
- Run TouchXplorer and copy CustClear.provxml from My Documents\My Ringtones\ to \Windows
- Run Connection Setup
- Deploy my Unlock_Mango_XBMODDeployer.xap
- Run XBMOD.Files.Deployer and uninstall it
- Run TouchXplorer and copy CustClear.provxml from My Documents\My Ringtones\ to \Windows
- Remember: not run Connection Setup now
- Update to MangoB2 7712
- Wait for update to finish
- Now disconnect from usb cable and enter SIM pin
- Now run Connection Setup
- Check that you are unlocked by running TouchXplorer
///////////////////////////////////////////////
Till next version enjoy!!
Regards, ansar

Error 244: Invalid Model ID
Thank you, but when i try Installing stucked in 1%.
Message appears: Error [244]: INVALID MODEL ID

did you read? did you install RSPL/HSPL first?
you cant load custom ROM's without load RSPL/HSPL
http://forum.xda-developers.com/showthread.php?t=1195647

Hi! thx for your work & sharing!
Can you tell me, why should i first install rspl and than 2nd hspl? i don´t understand the benefit!
regards dr-death

hmm ... I've read the instructions and I've tried many rom including Mango 7713 Gold from DFT Team.
if not use rspl/hspl, installation will stucked in 0%

Dr-Death said:
Hi! thx for your work & sharing!
Can you tell me, why should i first install rspl and than 2nd hspl? i don´t understand the benefit!
regards dr-death
Click to expand...
Click to collapse
RSPL allows to install HSPL to device (if you not install HSPL, after reboot device RSPL is deleted from memory)
original SPL dont allow loading custom ROM's... this is benefit... in theory, you can load any ROM (WM, Android, WP7) if available... for now only WP7 custom ROM's is available

charboss said:
Thank you, but when i try Installing stucked in 1%.
Message appears: Error [244]: INVALID MODEL ID
Click to expand...
Click to collapse
i have installed HSPL, but i can´t flash this rom. can you help me?? the dft-rom flash with success...
PC92100
HSPL1.22.2250.0
CotullaHSPL 0x06
Touch A1(v10,20)
regards dr-death

Dr-Death said:
i have installed HSPL, but i can´t flash this rom. can you help me?? the dft-rom flash with success...
PC92100
HSPL1.22.2250.0
CotullaHSPL 0x06
Touch A1(v10,20)
regards dr-death
Click to expand...
Click to collapse
Yes, I also can't install this rom, always stops at 1% and restart my phone. Ansar could probably fix it. I am assuming the problem is on the radio 5.65.09.25a_22.42.50.21U, spl version does not match because it always appears message Error [244]: INVALID MODEL ID, but I also could not confirm it, I hope Ansar know more about this issue.
I've been experimenting with installing ROM RUU_Gold_HTC_Europe_1.22.401.01_Radio_5.63.09.13_3a_22.36.50.15U_by_ansar, then I try to install just file spl_signed.nbh from ROM RUU_Gold_HTC_Europe_1.24.401.01_Radio_5.64.09.20_22.42.50.15_Signed_GOLD_RELEASE, and the results radio version is 5.64. 09.13_3a_22.36.50.15U. It works perfectly in my device.
I am still waiting for the new radio version.
Note: based on my experiment: if your device installed hspl with just installing file 'spl_signed.nbh' from stock/branded rom, your spl will be back to stock spl.
(sorry for my bad english)
regards, charboss

charboss said:
Yes, I also can't install this rom, always stops at 1% and restart my phone. Ansar could probably fix it. I am assuming the problem is on the radio 5.65.09.25a_22.42.50.21U, spl version does not match because it always appears message Error [244]: INVALID MODEL ID, but I also could not confirm it, I hope Ansar know more about this issue.
I've been experimenting with installing ROM RUU_Gold_HTC_Europe_1.22.401.01_Radio_5.63.09.13_3a_22.36.50.15U_by_ansar, then I try to install just file spl_signed.nbh from ROM RUU_Gold_HTC_Europe_1.24.401.01_Radio_5.64.09.20_22.42.50.15_Signed_GOLD_RELEASE, and the results radio version is 5.64. 09.13_3a_22.36.50.15U. It works perfectly in my device.
I am still waiting for the new radio version.
Note: based on my experiment: if your device installed hspl with just installing file 'spl_signed.nbh' from stock/branded rom, your spl will be back to stock spl.
(sorry for my bad english)
regards, charboss
Click to expand...
Click to collapse
Hi! Is your bootloader now 1.24.x or 1.22.x?? Can i update the bootloader only??
my radio is Radio_5.64.09.20_2 2.42.50.15, but the bootloader is 1.22.x. thx for your answers!!
regards dr-death

Dr-Death said:
Hi! Is your bootloader now 1.24.x or 1.22.x?? Can i update the bootloader only??
my radio is Radio_5.64.09.20_2 2.42.50.15, but the bootloader is 1.22.x. thx for your answers!!
regards dr-death
Click to expand...
Click to collapse
My Bootloader now is 1.24.2250.0, OS Version: 7713.WM7_Main(DFT)...
Yes, you can do that. I've tried it.
But remember if your bootloader is HSPL after installation your bootloader will be back to SPL and your phone will be resetting your data and application.
I did it, when I start from beginning of installation (from OS 7004) or after install Custom ROM from DFT.

Thank you for your work.
How is it looking about DFrouter?
Would appreciate such a ROM

Hi.
1st. Sorry for my english.
2nd. Maby its not exactly place for my question but...
I have problem with update to this version (i need Polish lang). When i connecting by ZONE soft - it all OK but... DFT_HSPL_WP7FG2 dont see my HTC and wingows mobile on win7 too. What can i do?
thx.
HTC 7 pro T7576
OS: 7.0.7392.0
Radio: 5.65.09.25a_22.45.50.21u

You tried do everything the same in this thread ? http://forum.xda-developers.com/showpost.php?p=16189677&postcount=2
Read #2 post, Zune must be off and device must be unplugged from PC. You must run DFT_RSPL_WP7FG1_LAUNCH and klik next. At this moment you can plug your device to PC by USB but, phone must be in bootloader mode (off device and on with hold volume down button - you see three colored screen). Now you can instal RSPL and next HSPL.

Thx Budniu. (dziękuję)

[Q] Error while installing Mango RTM on Samsung Focus

I am trying to update Samsung Focus from Mango 7.10.7712 to Mango RTM.
I am getting an error while running the batch file ISVTo7720.bat -
Please help me out to get RTM build.
Error Details -
Applying updates to device
Id: \\?\usb#vid_045e&pid_04ec&mi_00#6&19772f4c&0&0000#{ca3d7387-f67
b-11da-bbec-8000600fe800}
SN: c5c67023 - 459af277 - 4f5aebca - 8c435003
Name: BLUE GENE
KITLName: QSD8XXX8B5342AE
Manufacturer: SAMSUNG
ModelId: 4
Model: SGH-i917
MobileOperator: ATT-US
Version: 07.10.07712.03-00.00.00000.00-00.00.00000.00
Checking your phone's status: Completed in 0.02 seconds
Checking system requirements: Completed in 0.27 seconds
Downloading updates: Completed in 6.69 seconds
Checking system requirements: Completed in 0.02 seconds
Transferring updates: Completed in 17.42 seconds
Preparing to install: Completed in 58.11 seconds
Restarting your phone: Completed in 60.09 seconds
Installing updates: Completed in 0.06 seconds
Error:
Update device c5c67023 - 459af277 - 4f5aebca - 8c435003 Complete with error code
: 801812C1, error message: A driver for your phone needs to be updated and could
n't be installed in time.

[Q] Installing WP7.8 error "The Preinstallation Update/Super package isn't signed"

[Q] Installing WP7.8 error "The Preinstallation Update/Super package isn't signed"
I have tried multiple times trying to install the WP7.8 upgrade package DL'ed via NaviFirm, but, while installing the package using WP7 Update Cab Sender, It keeps aborting. Can someone shed any lights as to what I had done wrong?
Many thanks to all in advance...
The screen shows the message as below:
╔════════════════════════════════════════════════════════════════════╗
║ WP7 Update Cab Sender xboxmod-Yuki 2011 ║
╠════════════════════════════════════════════════════════════════════╝
■
╠══════» S ·(S)end Cabs to device
■
╠══════» B ·Send Cabs to device with (B)ackup
■
╠══════» R ·(R)estore device backup
■
╠══════» L ·Read last Update (L)ogs from device
■
╚══> Your choice: S
╔══════» Creating list of cabs
■
■
╠══════» Updating device
■
UpdateWP version 4.8.2345.0
Applying updates to device
Id: \\?\usb#vid_045e&pid_04ec&mi_00#6&1a2d7d96&0&0000#{ca3d7387-f67
b-11da-bbec-8000600fe800}
SN: 691cad0a - 1fa581b0 - c3f49745 - f3fdba46
Name: XXXX Lumia 800
KITLName: SEARAYxxxxxxxxx
Manufacturer: NOKIA
ModelId: 4
Model: Lumia 800
MobileOperator: 000-ID
Version: 07.10.08773.03-00.00.00000.00-00.00.00000.00
Checking your phone's status: Completed in 0.01 seconds
Checking system requirements: Completed in 0.03 seconds
Downloading updates: Completed in 32.68 seconds
Checking system requirements: Completed in 0.02 seconds
Transferring updates: Completed in 49.04 seconds
Preparing to install: Completed in 8.07 seconds
Error:
Update device 691cad0a - 1fa581b0 - c3f49745 - f3fdba46 Complete with error code
: 80188223, error message: Phone Update Agent error: The preinstallation update
package (or super package) isn't signed.
■
╚══════» Done
Press any key to continue . . .

Re: [Q] Installing WP7.8 error "The Preinstallation Update/Super package isn't signed
I am having htc explorer a310e plz tell me how to install rom in it and upgrad to android 4 in easiest way. For your info i am new to android world. I unlock bootloader and root my phone using super user. After this i done factor reset and now stuck on htc logo screen. Plz help me in repairing my device.
Sent from my GT-P3100 using xda app-developers app

RESILVED
I resolved the issue by updating/upgrading the WP os to 7.8 by way of Nokia Care Suite.
I am now running WP7.8, will update with all the goods and bads of this new update.
Thanks
maclear said:
I have tried multiple times trying to install the WP7.8 upgrade package DL'ed via NaviFirm, but, while installing the package using WP7 Update Cab Sender, It keeps aborting. Can someone shed any lights as to what I had done wrong?
Many thanks to all in advance...
The screen shows the message as below:
╔════════════════════════════════════════════════════════════════════╗
║ WP7 Update Cab Sender xboxmod-Yuki 2011 ║
╠════════════════════════════════════════════════════════════════════╝
■
╠══════» S ·(S)end Cabs to device
■
╠══════» B ·Send Cabs to device with (B)ackup
■
╠══════» R ·(R)estore device backup
■
╠══════» L ·Read last Update (L)ogs from device
■
╚══> Your choice: S
╔══════» Creating list of cabs
■
■
╠══════» Updating device
■
UpdateWP version 4.8.2345.0
Applying updates to device
Id: \\?\usb#vid_045e&pid_04ec&mi_00#6&1a2d7d96&0&0000#{ca3d7387-f67
b-11da-bbec-8000600fe800}
SN: 691cad0a - 1fa581b0 - c3f49745 - f3fdba46
Name: XXXX Lumia 800
KITLName: SEARAYxxxxxxxxx
Manufacturer: NOKIA
ModelId: 4
Model: Lumia 800
MobileOperator: 000-ID
Version: 07.10.08773.03-00.00.00000.00-00.00.00000.00
Checking your phone's status: Completed in 0.01 seconds
Checking system requirements: Completed in 0.03 seconds
Downloading updates: Completed in 32.68 seconds
Checking system requirements: Completed in 0.02 seconds
Transferring updates: Completed in 49.04 seconds
Preparing to install: Completed in 8.07 seconds
Error:
Update device 691cad0a - 1fa581b0 - c3f49745 - f3fdba46 Complete with error code
: 80188223, error message: Phone Update Agent error: The preinstallation update
package (or super package) isn't signed.
■
╚══════» Done
Press any key to continue . . .
Click to expand...
Click to collapse