Having an issue when in recovery mode. When I select the recovery option the screen turns black and the a phone appears in the center of the screen with green arrows that form a circle. After a few seconds a red triangle with an exclmation point appears. Any idea what this is and how do I get to the part where I can install the ICS zip file on my sd card?
mtaylor395 said:
Having an issue when in recovery mode. When I select the recovery option the screen turns black and the a phone appears in the center of the screen with green arrows that form a circle. After a few seconds a red triangle with an exclmation point appears. Any idea what this is and how do I get to the part where I can install the ICS zip file on my sd card?
Click to expand...
Click to collapse
Have you tried installing a new recovery, maybe it got corrupted. Also make sure your doing your wipes in recovery before you install your new rom.
Dicht yer neb and flee awea!
Related
I am rooted and for the life of me, cannot get my gTab to boot into clockworkrecovery. Followed the instructions to the T to install it but cannot boot into it - any ideas?
I actually used the clockworkmod_microsd option to install to my card - how would i access the internal memory to install from there? maybe that's the problem?
So you extracted the zip file to the root of your external MicroSD (SDCARD2) and restarted while holding down the volume up key... and what happened?
In my case, after doing the initial install when I try to boot in recovery, the viewsonic screen comes up (with no recovery text) and then goes to black. When I eventually try to power up again, the tab goes back to the original ROM.
Initial attempts to install cwm and flash here. One of the Wooters who got a Gtab
Look carefully. The screen should be black except for very small text in the upper left corner of the screen. If intensity is down, you might not see it.
Jefiner said:
In my case, after doing the initial install when I try to boot in recovery, the viewsonic screen comes up (with no recovery text) and then goes to black. When I eventually try to power up again, the tab goes back to the original ROM.
Initial attempts to install cwm and flash here. One of the Wooters who got a Gtab
Click to expand...
Click to collapse
Sounds like you're holding the volume down key and ending up in APX mode.
Hey guys.
So I tried to use the GB kernel to install a custom ROM.
I installed stock+Voodoo-T959VKG4-unsigned-update.zip on my T mobile Galaxy S 4G using CWM. I chose to install a zip file from the sdcard, and I chose that file.
When it first booted up, it actually spoke to me with a robot voice "Converting system partition. Estimated time, 2 minutes" while showing garble on the screen. It looks like when a video driver crashes.
Now it just boots up to garble then goes into a boot loop. Holding down volume up + down on boot up boots to a blank screen with soft buttons illuminated. Odin and ADB don't recognize it but it does do mass storage.
Is it a paperweight?
Hi Guys,
I have a Nexus S and I wanted to get ICS. I flashed the 128 mb ICS image manually through fastboot recovery, however, I wanted to go flash some MODS on the phone again but it's not working.
It's going into fastboot and I can choose what I want from the menu but when I choose Recovery, it shows the Google screen, Flashes the Android with a little "Matrix" ball in front of it and then it freezes at a black screen, with the soft buttons lit up.
Could anyone tell me what happened and if it can be fixed?
PS: When I press VolumeUp+Power at the black screen, it resets! and i have clockworkmod installed..
Hey, I installed ICS on my Nexus S. After that, the phone doesn't boot (stays at loading screen). When I wanted to go to recovery to issue the problem, it doesn't work.
- I boot the phone with Bootloader option
- Then, I put Recovery option and the phone restarts and the Google logo appears,
but
- After, appears an android logo with a poligon and the screen is going to black for ever (the controls are iluminated).
Can anyoneissue this problem?
Thanks.
P.D: I didn't make any format (dalvik, data, etc) I forgot it.
try flash recovery in fastboot before you go in recovery
qtwrk said:
try flash recovery in fastboot before you go in recovery
Click to expand...
Click to collapse
I'm lost. I tried to do it but I hadn't success. Is there any good tutorial to follow (I see a few but they don't are usefull for me.
Thanks a lot!
could you try to reboot in recovery via ADB? (adb reboot recovery)
The ICS recovery for i9023 is bugged, it does not turn the backlight on, try shining a bright light on it
Sent from my ice cream powered Nexus S
DarkhShadow said:
The ICS recovery for i9023 is bugged, it does not turn the backlight on, try shining a bright light on it
Sent from my ice cream powered Nexus S
Click to expand...
Click to collapse
You're right. It shows an Android Icon in horizontal position with an exclamation on it. What does it mean?
SwH.85 said:
could you try to reboot in recovery via ADB? (adb reboot recovery)
Click to expand...
Click to collapse
The ADB doesn't recognize my phone. ADB is configured, Drivers are updated. But debuging mode wasn't enabled (is that the problem). Thanks
zeodryen said:
You're right. It shows an Android Icon in horizontal position with an exclamation on it. What does it mean?
Click to expand...
Click to collapse
that is the same thing that popped up for gingerbread recovery, except it it just a different logo/symbol. I had the same problem, you just need to shine an extremely bright light on it, so when the android icon comes up in recovery, do the same as gingerbread. Hold down and just press the power button once and you will then go to your recovery menu and all options are available.
It's a very annoying bug, but it's just the backlight is out.
joshhhhh95 said:
that is the same thing that popped up for gingerbread recovery, except it it just a different logo/symbol. I had the same problem, you just need to shine an extremely bright light on it, so when the android icon comes up in recovery, do the same as gingerbread. Hold down and just press the power button once and you will then go to your recovery menu and all options are available.
It's a very annoying bug, but it's just the backlight is out.
Click to expand...
Click to collapse
The icon still there, lying there with an exclamation. After a while the phone just reboot. Any menu appears.
zeodryen said:
The icon still there, lying there with an exclamation. After a while the phone just reboot. Any menu appears.
Click to expand...
Click to collapse
Holding volume down and tapping power doesn't do anything?
Sent from my ice cream powered Nexus S
I have a px5 radio packed as kanor. It is a px5(1024x600) running 8.0 with mtce_kld_v3.01_1 and has physical buttons.
It was running ok. I went into factory settings and changed the led color and changed the mapping on one button. It said it needed to reboot. It did and now I just have a blank screen.
I can get into recovery mode. I have tried to flash a new mcu from the 4pda site (also 3.01) as well as an update.zip. one I had went through but when it comes up I still have the black screen. I have tried an update.zip that was rooted but that just fails. I tried creating a boot sd card and upgrading (I think this was in malaysk thread. I have read so many things on this sure and am just starting to confuse myself even more.
Can anyone please help me understand what I need to do to try and get this thing back up. I would really appreciate it.
Thanks.
I guess I can not post pictures yet but when I updates the box with update.zip this is what it said on the screen
Install /mnt/usb_storage/update.zip
Finding update package
Verifying update package
Update verification took 33.8 seconds
Installing update
Target: Android/px5/px5:8.0.0/OPR5.170623.007/hts01151054:user <rest was cut out of picture>
Patching system image unconditionally
Patching vendor image unconditionally
Patching oem image unconditionally
Writing trust img
Writing uboot loader img
Writing resource image
script succeeded: result was [1.000000]
Install from SD card complete.
That looks good to me but I still reboot and get no screen. What am I missing?
Hi.
I have a similar problem.
I was updating my radio auto, the original was on android 8.0 and updated to 10.0
so far so good ... then I wanted to update the mcu because it was at v2.80 and put the file on the sd card and clicked on mcu update. the radio restarted and a screen appeared like this:
- a screen with chinese Letters
- a red, a green and a blue bar
- a Version PX5 V1.1
to get out I had to take the card out and press the reset button. now the screen goes black and nothing happens. but if you put the card in and press reset you will return to the screen with Chinese letters ...
the worst thing is that I cannot now enter recovery mode.
I tried using the reset button and nothing .... the only signal that seems to be for recovery mode is to press the power button for 10s, the lights flash, then I let go and charge again but nothing happens ...
Help me, please...
After the lights flash when holding the power button let go then press again right away.
I never get any letters out anything on the screen unless I enter recovery.
Waltreynolds said:
After the lights flash when holding the power button let go then press again right away.
I never get any letters out anything on the screen unless I enter recovery.
Click to expand...
Click to collapse
Again in power button? Without sd card nothing happened...
I need sd case with firmware or mcu!?
tiago.cruz said:
Again in power button? Without sd card nothing happened...
I need sd case with firmware or mcu!?
Click to expand...
Click to collapse
If you get recovery button sequence LED flashes, or into recovery, MCU is fine.
No screen, try OTG Android recovery - refer my signature.
marchnz said:
If you get recovery button sequence LED flashes, or into recovery, MCU is fine.
No screen, try OTG Android recovery - refer my signature.
Click to expand...
Click to collapse
Thanks for the suggestion. I just started to read the thread. DO I really still need a jig? Afraid that might be beyond my skill set.
Either way, Thanks.
Walt