Hi guys,
I wanted to update my HTC Sensation Revolution 6.3.1 with Android 2.4.3 to 6.5.1 with Ice cream sandwich. But after I updated the firmeware and radio, wiped the phone and installed the ROM my sensation freezes when the Beats Audio screen shows.
the bootloader shows this:
-Revolutionary-
PYRAMID PUT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO-11.22.3504.07_M
OpenADSP-v02.6.0.222.6.00.0131
eMMC-boot
Jan 13 2012, 17:33:34
HBOOT
I also changed the cid to 11111111. I always checked the MD5 checksum.
I found several threads about this problem on the internet but anything that helps other people doesn't work with my phone.
Please help me!
thanks in advance!
Did you super wipe your phone before you installed the new rom? And did you do a backup?
yes I always super wipe it. I did a backup via Titanium backup but not in the recovery.
I also tested the not-xe version and the screen freezes too.
So you can't go into your phone only in recovery and bootloader and you didn't back it up with rom manager?
yes, thats exactly where I stand.
Any ideas what to do?
EDIT: Sorry never mind my comment... Didn't read your comment carefully....
Sent from my HTC Sensation using xda premium
I thought that I did this already
I've downloaded "Firmware from 3.32.401.x & 3.32.401.10x RUU" and flashed it.
Have you deleted the firmware pmg58img file from the SD card?
What version firmware did you flash?
Sent from my Pyramid-T
Yes I deleted the PG58IMG.zip file after flashing it.
I've downloaded 3.32.401.x & 3.32.401.10x RUU from this page: http://forum.xda-developers.com/showthread.php?t=1412618
I came across this thread and it says:
Perhaps you can try this and see if it works for you?
******* Note: Very few users reported that even after flashing v3.24 firmware , they got bootloop. But when they flashed v3.12 firmware, they were fine. So if you fall into the category of those very few users , then try to flash v3.12 firmware. Some users pointed out that the HBOOT 1.27 was the actual reason to cause the bootloop. So another solution is to replace the HBOOT 1.27 with the older HBOOT from V3.12 firmware package. Recently released firmware V3.32 and V3.30 have the same hboot as in V3.24. So who ever got bootloop with V3.24 , they will be still in bootloop with V3.30 and V3.32. The advice is same . Just stick to V3.12 firmware or replace the HBOOT of V3.30/V3.32 with the HBOOT found in V3.12 till HTC release a newer HBOOT resolving this issue. Few users got ARHD 6.3.X working with V3.12 firmware too. So you can also have a try.Remember v3.12 firmware is compatible for both Gingerbread and IceCream Sandwich. But the GB ROM must be sense 3.5 based else again you will get bootloop. *******
V3.12 Firmware can also be downloaded from the same thread.
THANK YOU!!!
After downloading and flashing 3.12 everything works just fine
Phil21 said:
THANK YOU!!!
After downloading and flashing 3.12 everything works just fine
Click to expand...
Click to collapse
No problem! Glad I could help you!
Related
Hello everybody,
I've a problem since yesterday, my HTC Sensation XE doesn't boot anymore.
I wanted to download the newest Insertcoin ROM (I'm S-OFF, rooted and wroten superCID). In the topic of the Insertcoin ROM indicated that I need firmware 3.24. So I downloaded that firmware, installed it on my phone (power+volume down) and then... broken phone. When I turned my phone on, it showed the green HTC logo and the beats logo and it started over again. I've tried very much (install very much other firmwares, restore to my last backup, factory reset) but nothing helps!
This is the topic of the insertcoin mod: http://forum.xda-developers.com/showthread.php?t=1468683
I hope someone can help me.
Thanks!
Nicola
Try this:
1. Check MD5 sum of 3.24 firmware and if OK, re-flash.
2. Remove PG58IMG.zip from your SD card and boot into recovery (VOL- / POWER).
3. Run the superwipe script.
4. Check MD5 sum of your ROM and if OK, re-flash.
5. Don't install any other mods, just reboot and let the ROM startup - may take 5-10mins for the first boot.
I got it working!
I downloaded the leaked android 4.0.1 ruu. I installed it, then I used the backup!
Thank you for your help!
niiicola said:
I got it working!
I downloaded the leaked android 4.0.1 ruu. I installed it, then I used the backup!
Thank you for your help!
Click to expand...
Click to collapse
can i ask where you got android 4.0.1 ruu from because i think im having the same problem and i would like to fix it.
Mookie_Jones said:
can i ask where you got android 4.0.1 ruu from because i think im having the same problem and i would like to fix it.
Click to expand...
Click to collapse
From the ruu thread maybe?
Sent from my HTC Sensation XE with Beats Audio Z715e using XDA App
Mookie_Jones said:
can i ask where you got android 4.0.1 ruu from because i think im having the same problem and i would like to fix it.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1408961
I"m kinda stuck too. Will try this!
Thanks!
HALLPP!!!
MY FRIENDS SENSATION IS STUCK ON BOOTLOOP!!!!!
pyramid pvt ship s-off RL
HBOOT-1.27.1100
radio-10.14.9035.01_M
openADSP-v2.6.0.2226.00.0104
eMMc-boot
jan 13 2012,17:33:34
no CID, no backup, i can get into CWM though,.... HALP!!!!
osamaali said:
MY FRIENDS SENSATION IS STUCK ON BOOTLOOP!!!!!
pyramid pvt ship s-off RL
HBOOT-1.27.1100
radio-10.14.9035.01_M
openADSP-v2.6.0.2226.00.0104
eMMc-boot
jan 13 2012,17:33:34
no CID, no backup, i can get into CWM though,.... HALP!!!!
Click to expand...
Click to collapse
It looks like you didn't let the firmware update complete, you don't have the correct radio from the firmware.
try to use Kohr-Ah's Firmware (http://forum.xda-developers.com/showthread.php?t=1192300)
Downgrade your FW by selecting correct CID/FW and re-flash it by 3.24 again by your own CID/FW
Lately I have some problems with installing the latest firmwares for the Sensation. Both 3.24 as 3.30 firmwares cause a bootloop, but the 3.12 firmware is just working fine.
My flashing procedure:
1. Super wipe
2. Install Firmware
3. Super wipe
4. Install ROM
5. Wipe dalvik + cache
6. Fix Permissions
This all causes a bootloop. Also tried to install the ROM first and then the firmware. (without super wipe in between of course)
Things I've tried
- My cid was HTC__E11 and changed it to 11111111 (and back again now)
- Tried booting without sd-card and without sim-card
- Making a PG58IMG.zip with an old HBOOT
-Tried both Mike1986.'s firmware as the noob friendly from Kohr-Ah
More people having these probs and do any of you have new ideas?
The only thing that can in my mind, was to stick with the 3.12 roms untill the official release comes form HTC. Unroot etc to get the official update and check if my phone will work. If not, send it to HTC Repair centre.
Which ROM are you trying to install? You try updating firmware to latest 3.30 and install latest Insertcoin, works for me.
Sent from my HTC Sensation XE with Beats Audio using Tapatalk
all you have to do is:
download the 3.30 fw
put the PG58IMG in your sd card root folder
go into hboot screen and flash it (you have to be superCID) reboot+vol down
now delete PG58IMG from your sd card and reboot in recovery
wipe all and flash your rom
enjoy
If you had bootloop eariler with V3.24 firmware , you will still have bootloop with V3.30 firmware as the HBOOT is same in both v3.30 and V3.24 .
Stick to V3.12 till HTC release a newer HBOOT in near future . Till now there is no logical reason why it is happening with a very few users.
I've had the same problem all day with this. I flashed the recommended 3.3.0 f/w this morning and couldn't for the life of my work out why i was getting bootloops.
Luckily I came across this by chance, saved hours of tearing my hair out thanks
matt95 said:
all you have to do is:
download the 3.30 fw
put the PG58IMG in your sd card root folder
go into hboot screen and flash it (you have to be superCID) reboot+vol down
now delete PG58IMG from your sd card and reboot in recovery
wipe all and flash your rom
enjoy
Click to expand...
Click to collapse
I've followed these steps and still gets me a bootloop as I mentioned in the starting post.
Sigg1996 said:
Which ROM are you trying to install? You try updating firmware to latest 3.30 and install latest Insertcoin, works for me.
Sent from my HTC Sensation XE with Beats Audio using Tapatalk
Click to expand...
Click to collapse
I've tried, ARHD, InsertCoin, HyperNonSense, Open Sensation CM9, Virtuos Inquisition. It's not the Rom that's causing the bootloop. It's the firmware that's causing it.. Most roms do work with he 3.12 firmware.
Think I'll stick to musarraf172 his advice and stay on 3.12 till a new hboot comes out. Or maybe if someone else finds a solution for this.
FINALLY a post that I can reply on (forum rules I'm new @ develpers section)
I have the same problem as you I get bootloop with 3.24 and 3.30
3.12 runs fine, my question is, can I install mike's new ROM 6.3.0 XE
with the 3.12 or will I screw up my phone (I really don't know much about this sorry if it's a stupid question )
P.S: the 3.12 fw bootloader says LOCKED on it, doesn't let me to flash radio, so I'm currently stuck with a piece of metal, any help?
thanks
avishai445 said:
FINALLY a post that I can reply on (forum rules I'm new @ develpers section)
I have the same problem as you I get bootloop with 3.24 and 3.30
3.12 runs fine, my question is, can I install mike's new ROM 6.3.0 XE
with the 3.12 or will I screw up my phone (I really don't know much about this sorry if it's a stupid question )
P.S: the 3.12 fw bootloader says LOCKED on it, doesn't let me to flash radio, so I'm currently stuck with a piece of metal, any help?
thanks
Click to expand...
Click to collapse
no you can't...you need at least 3.24 fw
where can I get some other firmware (unlocked one) which will work with mike's rom Android Revolution 3.6.13 (and the radio on his post)
on his post it sayd "thanks to HTC for base firmware" where can I get that?
Thanks
matt95 said:
no you can't...you need at least 3.24 fw
Click to expand...
Click to collapse
You might be wrong here.
@ guy asking question. Just install the rom with 3.12 fw, as mussy said, there are a few people that get bootloops with latest fw but run ok on 3.12. Also, you can always take 3.30 fw, remove hboot.img from it, and just update radio and other partitions but leave hboot intact. That might work.
Sent throught the wormhole from my CoinInserted Sensation OG.
avishai445 said:
FINALLY a post that I can reply on (forum rules I'm new @ develpers section)
I have the same problem as you I get bootloop with 3.24 and 3.30
3.12 runs fine, my question is, can I install mike's new ROM 6.3.0 XE
with the 3.12 or will I screw up my phone (I really don't know much about this sorry if it's a stupid question )
P.S: the 3.12 fw bootloader says LOCKED on it, doesn't let me to flash radio, so I'm currently stuck with a piece of metal, any help?
thanks
Click to expand...
Click to collapse
You can run ARHD 6.3.0 with V3.12 firmware. Some users already confirmed this.
Locked HBOOT does not allow to flash radio, splash via fastboot. But You can easily flash radio, splash etc by PG58IMG.zip method.
bootloop fix?
Hey again,
just figured out why I got the bootloops with the 3.30 and 3.24
The reason is very simple : I tried to flash them without flashing to the new ROM
The old ROM I had just happened to work with the 3.12 but with the 3.24/3.30 it went to the bootloops.
Here's the guide that helped me with this issue (now I have the 3.30 and the 6.3.0XE ARHD ROM) :http://forum.xda-developers.com/showthread.php?t=1472298
Thanks to erraggy for giving me this link to the great guide
P.S : If you have some cooked UOT file you made with SystemUI.apk & framework-res.apk , DO NOT flash them after flashing the ROM , your phone will be stuck @ the first boot for hours. I know it sounds stupid, but hey, I'm new at this and if it helps others do be it
btw, great ROM
avishai445 said:
Hey again,
just figured out why I got the bootloops with the 3.30 and 3.24
The reason is very simple : I tried to flash them without flashing to the new ROM
The old ROM I had just happened to work with the 3.12 but with the 3.24/3.30 it went to the bootloops.
Here's the guide that helped me with this issue (now I have the 3.30 and the 6.3.0XE ARHD ROM) :http://forum.xda-developers.com/showthread.php?t=1472298
Thanks to erraggy for giving me this link to the great guide
P.S : If you have some cooked UOT file you made with SystemUI.apk & framework-res.apk , DO NOT flash them after flashing the ROM , your phone will be stuck @ the first boot for hours. I know it sounds stupid, but hey, I'm new at this and if it helps others do be it
btw, great ROM
Click to expand...
Click to collapse
Glad to see that you have figured it out.
avishai445 said:
Hey again,
just figured out why I got the bootloops with the 3.30 and 3.24
The reason is very simple : I tried to flash them without flashing to the new ROM
The old ROM I had just happened to work with the 3.12 but with the 3.24/3.30 it went to the bootloops.
Here's the guide that helped me with this issue (now I have the 3.30 and the 6.3.0XE ARHD ROM) :http://forum.xda-developers.com/showthread.php?t=1472298
Thanks to erraggy for giving me this link to the great guide
P.S : If you have some cooked UOT file you made with SystemUI.apk & framework-res.apk , DO NOT flash them after flashing the ROM , your phone will be stuck @ the first boot for hours. I know it sounds stupid, but hey, I'm new at this and if it helps others do be it
btw, great ROM
Click to expand...
Click to collapse
I tried doing this and still cant upgrade to 3.24 or 3.30 fw. I did super wipe, flashed fw 3.30 and then flashed ROM but still get boot loops. I think some phones cant upgrade?
I have T-mobile US and i did try the user friendly fw 3.30 also.
tone602 said:
I tried doing this and still cant upgrade to 3.24 or 3.30 fw. I did super wipe, flashed fw 3.30 and then flashed ROM but still get boot loops. I think some phones cant upgrade?
I have T-mobile US and i did try the user friendly fw 3.30 also.
Click to expand...
Click to collapse
Did V3.24 work on your phone ? If not , then V3.30 will also not work. You can flash v3.12 and install ARHD 6.3.0 . They will work together. If you still want to flash V3.30 , then replace the HBOOT 1.27.1100 in V3.30 with the HBOOT in V3.12.
musarraf172 said:
Did V3.24 work on your phone ? If not , then V3.30 will also not work. You can flash v3.12 and install ARHD 6.3.0 . They will work together. If you still want to flash V3.30 , then replace the HBOOT 1.27.1100 in V3.30 with the HBOOT in V3.12.
Click to expand...
Click to collapse
Fw 3.24 didn't work for me either. I am currently using the 3.30 file with the hboot from 3.12 on Elegancia Rom. Its just strange that there are a few phones that can't boot with the 1.27 bootloader.
Sent from my HTC Sensation 4G using XDA App
I have just installed the official update from the xda topic here.
Currently Im on Hboot 1.27 and the stock rom is booting up without any problems!
No more bootloopts with Hboot 1.27 !
I'm gonna root my phone again and put back my image on OpenSensation/ CM9.
Hopefully it's finally solved ! I'll keep you guys updated
Floris-k said:
I have just installed the official update from the xda topic here.
Currently Im on Hboot 1.27 and the stock rom is booting up without any problems!
No more bootloopts with Hboot 1.27 !
I'm gonna root my phone again and put back my image on OpenSensation/ CM9.
Hopefully it's finally solved ! I'll keep you guys updated
Click to expand...
Click to collapse
Thats great. The official untouched HBOOT 1.27 solved the issue.
Just curious . Does it show "locked" in bootloader screen ??
If so that menas the fastboot extended commands are disabled.
Just check it.
Ok, I'm done now. After installing the stock rom I just installed superuser and recovery again. Afterwards I restored my Nandroid backup and it's up and running.
Bootloader shows me:
***** Unlocked *****
PYRAMID PVT SHIP S-OFF RL
Hboot- 1.27.0000
Radio-11.22.3504.07_M
Another problem solved !
Floris-k said:
Ok, I'm done now. After installing the stock rom I just installed superuser and recovery again. Afterwards I restored my Nandroid backup and it's up and running.
Bootloader shows me:
***** Unlocked *****
PYRAMID PVT SHIP S-OFF RL
Hboot- 1.27.0000
Radio-11.22.3504.07_M
Another problem solved !
Click to expand...
Click to collapse
sounds good.
Can you test the following command to flash a new splash .
fastboot flash splash1 splash1.img
You can download some beautiful splash from here. Open the flashable zip and find the splash1.img inside the etc folder.
This is my second flash and its all gone wrong! I'm posting here because I can't post in the ARHD thread...
I was running ARHD 6.2.1 with no problems- its all gone bad when I tried to upgrade to 6.3.0
I downloaded the firmware package for 3.30 and checked MD5, downloaded ARHD 6.3.0 and checked MD5 and downloaded Superwipe.
I put all these files on a fresh SDcard and flashed the PG58IMG successfully, I then removed the card and deleted the firmware file.
I flashed the Superwipe and then the ARHD 6.3.0 and now I'm stuck in a boot loop. It gets as far as quietly Brilliant and reboots every time!
I try to restore my backup of ARHD 6.2.1 and although it checksums OK in 4EXT it gives an error when restoring data and does not restore...
Whats happened? HELP!!
G.
-Revolutionary-
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO-11.22.3504.07_M
OpenADSP-v02.6.0.2226.00.0131
eMMC-boot
Jan 13 2012,17:33:34
CID: 11111111 and MID PG58******
You need to wipe data before you flash. Hope this helped!
Goodluck~
Frmware 3.24 and 3.30 isn't working on my phone either. I installed firmware 3.12 again and flash a rom, then I was able to boot the phone.
I'm able to boot arhd, insertcoin, cm9 with thr 3.12 firmware, but HyperNonSense isn't booting here. So you could try firmware 3.12 with your rom
I'm still looking for a solution and as soon as I find, I will post it on xda !
Hi,
I got the same problem, bootlooped 3.24 / 3.30 fw
I installed the 3.12 but the bootloader is locked
it doesn't let me flash radio, I can't do anything with the phone now, can anyone post a link for an unlocked 3.12 firmware or tell me if I'm doing anything wrong?
Thanks
So, i had before inquisition 3.0.0 with 3.12 firmware or something like that, and all worked well. I tought its time for an upgrade so i took the new 3.32 firmware, installed it ,wiped everything, then i tried installing inquisition 4.0 via 4EXT Recovery and the ROM just keeps bootlooping between bootanimation and htc logo.
Any help?
The firmware is HTC PART 1 , as my CID is HTC__044 from
http://forum.xda-developers.com/showthread.php?t=1459767
HBOOT 1.27.1100
RADIO 11.22.3504.07_M
JAN 13 2012
ANY HELP please? I REALLY NEED THE PHONE FUNCTION!
Check the MD5 tags for both the firmware and VI4.0 downloads, do a superwipe and flash the ROM first, then the firmware - don't try to boot the ROM until the firmware is loaded.
Delete the firmware file immediately after.
I would also super CID if I were you.
MD5 tags the same, superwiped and flashed the rom after installin the firmware.
LE: Should i try installing HyperNonSense?
In that case I would suggest flashing the stock ICS release to check all is well, VI4.0 has an overclocked kernel which might be your problem.
Also, try reflashing the firmware to eliminate any update error.
As i read on noob guides on firmwares i found out that very few users cant boot the os correctly with HBOOT 1.27. I am among them. Any solutions? I want to try
VI 4.0 so bad. Till then i am running my old VI 3.0 backup with firmware 3.12 and hboot 1.23.
Make sure you deleted firmware zip from your sd card
your like me your phone my not like firmware
Can anyone help me to revert my HTC Sensation with Android Revolution ROM, 1.17 boot, S-OFF, 1.0.0.2 4EXT to stock GB ROM ?
I tried to recover some old backup but unfortunately it seems that it is corrupted, md5 check didn't passed.
All partitions are formated, but recovery and 4EXT still works,
So far tried to recover old ROM from OTA_Pyramid_HTC_Europe_1.45.401.2-1.35.401.1_P2_release_208907.zip but with some errors appeared.
I want to go back to original GB rom or ICS just to sell my phone, got now SG S3.
What should I do, thank you for any help.
If your going to sell it just download the full ruu on your pc
sent from xda premium sensation4g s off Insertcoin Ics Evolution v2.0 Sense 4.0 kernel version Bricked-3.0-v1.1
jslim38 said:
If your going to sell it just download the full ruu on your pc
sent from xda premium sensation4g s off Insertcoin Ics Evolution v2.0 Sense 4.0 kernel version Bricked-3.0-v1.1
Click to expand...
Click to collapse
Just now I restored tha last working backup and now downloading 'RUU_Pyramid_HTC_Europe_1.27.401.3_Radio_10.42.9007.00P_10.11.9007.15_M_release_192183_signed.exe but what to do with it next, install it from windows ?
Before I will sell it, I want to have possibility to download official update to ICS just to try how it works, but I would be glad if this phone would be totally free of my modifications (S-OFF and root access) just like a stock, new one.
Thats it your on the right track and you will install from Windows
sent from xda premium sensation4g s off Insertcoin Ics Evolution v2.0 Sense 4.0 kernel version Bricked-3.0-v1.1
So I tried to update from RUU_Pyramid_HTC_Europe_1.27.401.3_Radio_10.42.900 7.00P_10.11.9007.15_M_release_192183_signed.exe &
RUU_Pyramid_HTC_Europe_1.35.401.1_Radio_10.43a.9007.00U_10.51.9007.27_M3_release_198179_signed.exe
First is really old,second I found on my computer described as original rom. After executing this second RUU I only have one choice to update ROM - my actual and working ROM AR HD 4.1.1 is described as 2.08.401.1, RUU is 1.35.401.1 right after process starts it get's me to update error - 155, this error is described as not right update software, but my language is Polish and I think I chose right update. First RUU gives the same error.
apatch said:
Can anyone help me to revert my HTC Sensation with Android Revolution ROM, 1.17 boot, S-OFF, 1.0.0.2 4EXT to stock GB ROM ?
I tried to recover some old backup but unfortunately it seems that it is corrupted, md5 check didn't passed.
All partitions are formated, but recovery and 4EXT still works,
So far tried to recover old ROM from OTA_Pyramid_HTC_Europe_1.45.401.2-1.35.401.1_P2_release_208907.zip but with some errors appeared.
I want to go back to original GB rom or ICS just to sell my phone, got now SG S3.
What should I do, thank you for any help.
Click to expand...
Click to collapse
Hey, that's easy, don't worry.
Follow this guide: http://tinyurl.com/RUUGuide
to find your right RUU & instructions on how to flash it.
You'll need to flash the RUU twice. (Hboot pre-update)
It's a pain but you may have to try a different ruu try one with ics
sent from xda premium sensation4g s off Insertcoin Ics Evolution v2.0 Sense 4.0 kernel version Bricked-3.0-v1.1
Thank you both I will try it right now and would be happy to learn something.
My blind guess is that maybe I flashed some strange radio version few months ago, right now I have Radio_10.58.9035.00U_10.15.9035.02_2, could this be a reason to my update errors ?
What's your service provider
sent from xda premium sensation4g s off Insertcoin Ics Evolution v2.0 Sense 4.0 kernel version Bricked-3.0-v1.1
Play
Starting my phone thru fastboot USB and now udpating to RUU 1.35.401.1, fingers crossed.
All went well, thank you again for help.
New problem has appeared, I have flashed to newest rom and all went well, boot info showed:
*** LOCKED ***
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.0000
RADIO-11.22.3504.07_M
OpenADSP-V02.6.0.2226.00.01.31
eMMC-boot
Jan 13 2012, 17:33:34
But I want to give this phone to my friend so idea was to unroot it and flash 4EXT Recovery.
So i have used this KGS Tool to root it, all went well but I wanted to
have 4EXT and newest HBOOT-1.27.1100, in case 4EXT -using 2 methods from KGS failed, so tride to S-OFF again and agter that nothing was changed, some data was corrupted because after system loading Sense was broken and I only saw a upper bar menu, doing a phone rest in recovery helped but I still want to install 4EXT.
What tool should I use and how, please help me.
apatch said:
New problem has appeared, I have flashed to newest rom and all went well, boot info showed:
*** LOCKED ***
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.0000
RADIO-11.22.3504.07_M
OpenADSP-V02.6.0.2226.00.01.31
eMMC-boot
Jan 13 2012, 17:33:34
But I want to give this phone to my friend so idea was to unroot it and flash 4EXT Recovery.
So i have used this KGS Tool to root it, all went well but I wanted to
have 4EXT and newest HBOOT-1.27.1100, in case 4EXT -using 2 methods from KGS failed, so tride to S-OFF again and agter that nothing was changed, some data was corrupted because after system loading Sense was broken and I only saw a upper bar menu, doing a phone rest in recovery helped but I still want to install 4EXT.
What tool should I use and how, please help me.
Click to expand...
Click to collapse
There was nothing wrong with the phone, it was temp rooted.
the tool told you not to close the window.
Temp root wasn't removed.
Anyway, just head to the IRC Channel: #helpmenow
Once there, click my name & select query.
I'll help you out.
Finally all done, thanx http://forum.xda-developers.com/showpost.php?p=27742173&postcount=187