[Q] Need Some Clarification On Build Numbers - AT&T Samsung Galaxy S II Skyrocket SGH-I727

Hi everyone.
First I would like to thank everyone here for the guidance I have found on the forums, very helpful.
Second, although I am new to the forums and Android, I do know a little about Linux, kernels and roms, and the like
I am running romracers Alien rom 6 and love it. I have also flashed his latest "AT&T Stock-ish 0.3" kernel successfully (according to CPU-Spy and the screenshots provided on the thread) and the "fixed UCLA3 radio" (which was flashed BEFORE the kernel). Where Im confused is that the Build Number in the About Phone section, still shows "Gingerbread.UCKK1.AL6".
I was under the impression that flashing the new kernel would update the Build Number to the UCLA3 designation. But apparently I'm mistaken.
So I guess my question is, (and I have tried to search) what is the Build Number based off of? The ROM? The kernel? or ?. Im not having any issues with my phone. The question is more for my (and anyone else's) knowledge. Or If I have done something wrong during the flash, how to correct it.
Thanks again for all the hard work from everyone.

My understanding/ experience when flashing roms/kernels/modems:
Baseband version is the radio/modem on the phone. If for example, you flash the UCLA3 modem, your Baseband version should change to “I727UCLA3”
Kernel version is exactly that… my About phone shows “2.6.35.11”, and my CPU-Spy shows more detail to the kernel on the phone (for example, mine is Linux version “2.6.35.11-I727UCLA3-CL910433……” (with additional gcc version info and date/time of the actual kernel creation).
Build number: reflects the build of the ROM. In my case, since I flashed the UCLA3 rom silver03wrx created (from the UCLA3 ATT OTA system dump), mine shows “GINGERBREAD.UCLA3”. If you flash his or another developer’s custom roms, it would reference when they named the build.
Hope that’s correct and helps.

DoctorQMM said:
My understanding/ experience when flashing roms/kernels/modems:
Baseband version is the radio/modem on the phone. If for example, you flash the UCLA3 modem, your Baseband version should change to “I727UCLA3”
Kernel version is exactly that… my About phone shows “2.6.35.11”, and my CPU-Spy shows more detail to the kernel on the phone (for example, mine is Linux version “2.6.35.11-I727UCLA3-CL910433……” (with additional gcc version info and date/time of the actual kernel creation).
Build number: reflects the build of the ROM. In my case, since I flashed the UCLA3 rom silver03wrx created (from the UCLA3 ATT OTA system dump), mine shows “GINGERBREAD.UCLA3”. If you flash his or another developer’s custom roms, it would reference when they named the build.
Hope that’s correct and helps.
Click to expand...
Click to collapse
Makes perfect sense. Thanks for clearing that up for me. My baseband is what I expected it to be (UCLA3), just was not sure the kernel flashed completly/correctly

Related

[Q] Mesmerize Radio

Okay, I have android 2.2, the SuperClean 2.9.2 (or whatever new rom version it is), with voodoo activated. and the iamnuts_50_voodoo kernel on my phone. I am reading up about radios on the phone and if I understand correctly certain roms need certain radios to work. First off I cannot find what radio version I have and also I need to know if I need a certain version of radio for this current rom that I am using. Thank you.
Go to Settings > About phone and your radio is the last part of Baseband version. If you haven't specifically flashed another one, it's probably EC10. If you're running the version of that rom that was fixed for the Mesmerize, you're fine. If you're not, your phone should not be working. People who have flashed the newer EC01 radio have to use Fascinate roms because it's a Fascinate radio.
http://forum.xda-developers.com/showthread.php?t=1037918
This probably explains it better than I can.

Why flash custom Roms?

Can a kernel be flashed without a rom and vice versa?
Does it erase all saved data to flash a kernel? A rom?
The designations KD1, KB5, KJ6, wtf do these represent?
What is firmware version 2.2.1? Does this dictate what kernels/roms will work?
My phone came stock with
Baseband version: T959VUVKD1
after an unsuccessful root, it now it has
Baseband version: T959VUVKB5
What's the difference? Is my new one better?
My kernel is now 2.6.32.9
Wasn't stock kernel 2.2.1?
Why bother switching kernels/Roms in the first place? It seems like it's just a big headache. Launcher apps seem to provide more customization then alternate Roms. What gives?
Thanks in advance, this may seem noob but I find it hard just finding BASIC information sometimes.
I've spent a LOT of time dicking around with this new phone (my first smartphone) and I love the fact that it is customizable it but it takes up too much time to have to read up on everything, flash, then re load all my icons, screw that. I just want to know what is the best, fastest, simplest, most customizable rom/kernel combo up front, or I'm going back to stock, I have to believe that they designed the stock OS around the phone to maximize effectiveness.
Thanks in advance
Alot of questions but I'll attempt to answer them. Disclaimer though, I havent been on these forums for that long so my answers may not be correct and I wont be held responsible for incorrect info.
Farlander said:
Can a kernel be flashed without a rom and vice versa?
Does it erase all saved data to flash a kernel? A rom?
Click to expand...
Click to collapse
Yes a kernel can be flashed without a rom, but roms come with kernels already on them. When flashing a kernel, data on you're device is kept, but not vice versa.
The designations KD1, KB5, KJ6, wtf do these represent?
Click to expand...
Click to collapse
They are versions. They are labeled in alphanumeric order. Example, KB5 is the oldest of the three, KD1 is newer, and KJ6 is the newest (and the newest kernel at the moment for this phone as well).
What is firmware version 2.2.1? Does this dictate what kernels/roms will work?
Click to expand...
Click to collapse
2.2.x are Froyo (Frozen Yogurt) versions. 2.3.x are Gingerbread versionss with the Gingerbread bootloaders that are needed to flash most roms on here with Clockwork Mod (CWM).
General Android Knowledge:
Cupcake < Donut < Eclair < Froyo < Gingerbread (GB) < Honeycomb < Icecream Sandwich (ICS)
My phone came stock with
Baseband version: T959VUVKD1
after an unsuccessful root, it now it has
Baseband version: T959VUVKB5
What's the difference? Is my new one better?
Click to expand...
Click to collapse
Well "better" is relative, but it is indeed older. Also, try using the new SuperOneClick to root next time if you haven't.
http://forum.xda-developers.com/showthread.php?t=803682
My kernel is now 2.6.32.9
Wasn't stock kernel 2.2.1?
Click to expand...
Click to collapse
I'm noob so idk how to answer this.
Why bother switching kernels/Roms in the first place? It seems like it's just a big headache. Launcher apps seem to provide more customization then alternate Roms. What gives?
Click to expand...
Click to collapse
Custom ROMs can add features, take away bloatware (relatively useless programs that come preloaded with the phone), and provide functional inprovements (such as KJ6's better WiFi reception.
Thanks in advance, this may seem noob but I find it hard just finding BASIC information sometimes.
I've spent a LOT of time dicking around with this new phone (my first smartphone) and I love the fact that it is customizable it but it takes up too much time to have to read up on everything, flash, then re load all my icons, screw that. I just want to know what is the best, fastest, simplest, most customizable rom/kernel combo up front, or I'm going back to stock, I have to believe that they designed the stock OS around the phone to maximize effectiveness.
Thanks in advance
Click to expand...
Click to collapse
You may just want to just follow this guide for now:
Then after which, use SuperOneClick (SOC) to root
After you get yourself situated here, then move on to bigger and better roms such as RaverX3X's Octane:
http://forum.xda-developers.com/showthread.php?t=1305145
or Somairotevoli's 2.3.6 Debloated SimplySimple:
http://forum.xda-developers.com/showthread.php?t=1321611
Be sure to always follow the OP's Instructions to the T. For example, when wiping or mounting.
And UMMU mounts means in CWM under mounts set them to:
Unmount
Mount
Mount
Unmount
Hope this helped
Oh also, if all else ever fails when attemoting to flash a ROM, try the method found here:
http://forum.xda-developers.com/showthread.php?t=1223765
Farlander said:
Can a kernel be flashed without a rom and vice versa?
Does it erase all saved data to flash a kernel? A rom?
The designations KD1, KB5, KJ6, wtf do these represent?
What is firmware version 2.2.1? Does this dictate what kernels/roms will work?
My phone came stock with
Baseband version: T959VUVKD1
after an unsuccessful root, it now it has
Baseband version: T959VUVKB5
What's the difference? Is my new one better?
My kernel is now 2.6.32.9
Wasn't stock kernel 2.2.1?
Why bother switching kernels/Roms in the first place? It seems like it's just a big headache. Launcher apps seem to provide more customization then alternate Roms. What gives?
Thanks in advance, this may seem noob but I find it hard just finding BASIC information sometimes.
I've spent a LOT of time dicking around with this new phone (my first smartphone) and I love the fact that it is customizable it but it takes up too much time to have to read up on everything, flash, then re load all my icons, screw that. I just want to know what is the best, fastest, simplest, most customizable rom/kernel combo up front, or I'm going back to stock, I have to believe that they designed the stock OS around the phone to maximize effectiveness.
Thanks in advance
Click to expand...
Click to collapse
I'll do my best to answer this; hope I don't skip anything
Can a kernel be flashed without a rom and vice versa?
- The kernel is a traffic cop. It is what controls the underlying hardware in your phone, on your tablet, or on your PC. It handles things like memory management and allocation, access to hardware, process scheduling, and much more. You can flash a kernel onto an existing ROM (for example, Gingerbread VUVKG4 ROM with a modified KG4 kernel that has root access). The kernel you flash replaces the one that's already there. When you flash a ROM, it has a kernel already in it.
Does it erase all saved data to flash a kernel? A rom?
- Generally flashing a kernel does not wipe any of your data as you're only replacing the kernel. Flashing a ROM can wipe your data; it really depends on what you're flashing. It's always good practice to make a backup before flashing unless you've nothing on the phone to lose. Flashing a ROM that does wipe your data will not wipe the contents of your sdcard, it wipes the /data and other partitions on the phone's internal memory/storage.
The designations KD1, KB5, KJ6, wtf do these represent?
- Versions. Generally ROMs for our model of phone (Galaxy S 4G, SGH-T959V) have a name like VUVKB5, VUVKD1, or VUVKJ6. The last two characters correspond to a certain build/version number. The more recent the last two characters the more recent the build. The builds for our phone were on 2.2 (Froyo) through KD1 then went to 2.3 (Gingerbread) starting with KF1. Gingerbread required updated boot loaders for the phone. Without the proper boot loaders the phone wouldn't work.
What is firmware version 2.2.1? Does this dictate what kernels/roms will work?
- 2.2.1 is Froyo. It's a version of the Android operating system (OS). It does not dictate what will work, per-se. Rather it's telling you what version of the OS your phone is currently running. If you were to try and flash something, say a kernel, you'd definitely need to know what version you are on so that you flash a kernel/ROM for that version. You can upgrade to newer ROMs, though, say to go from 2.2.1 (KD1) to 2.3.6 (KJ6). You just have to make sure you have all of the right pieces in place first.
My phone came stock with
Baseband version: T959VUVKD1
after an unsuccessful root, it now it has
Baseband version: T959VUVKB5
What's the difference? Is my new one better?
- The "new" one is actually older, which means it is missing bug/performance fixes and the like.
My kernel is now 2.6.32.9
Wasn't stock kernel 2.2.1?
- Confusing, isn't it? The 2.6.32.9 is the kernel version & 2.2.1 is the ROM version. When you upgrade ROMs there's a good chance the kernel version will change, too, but not necessarily. They are independent numbers but kernels/ROMs are dependent upon one another. Clear as mud, right?
Why bother switching kernels/Roms in the first place? It seems like it's just a big headache. Launcher apps seem to provide more customization then alternate Roms. What gives?
- It's a personal preference most of the time. You could upgrade to the latest release ROM by Samsung which is VUVKJ6 using their Kies Mini software. It's Gingerbread based, faster, better battery life, wifi is a little weaker. Just make sure you backup any information you want to keep first. I generally keep my contacts synched with T-Mobile or Google and after a data wipe they sync back to the phone.
As for flashing custom ROMs you'd have to read up on the different ones to see if they interest you. Some increase performance, some have mad themes wrapped up in them, some have better battery life, some do their best to roll all of that up into them.
In short, you don't have to flash anything. The development community here enjoys doing it though despite what headaches it might bring. It enables us to hack/tweak the phone to see what it can do, what performance we can wring out of it, etc. I've learned a lot in the little time I've been in this community and have a TON more to learn.
I've spent a LOT of time dicking around with this new phone (my first smartphone) and I love the fact that it is customizable it but it takes up too much time to have to read up on everything, flash, then re load all my icons, screw that. I just want to know what is the best, fastest, simplest, most customizable rom/kernel combo up front, or I'm going back to stock, I have to believe that they designed the stock OS around the phone to maximize effectiveness.
- Unfortunately reading up on it, trying ROMs out, and going through some trials and tribulations is a part of the process. Which is the best ROM is strictly subjective so you'd get a bunch of different answers from a bunch of different people.
The best thing I can suggest is, if you're really interested, to take the time to read the stickies in the different forums (General, Q&A, Developer, etc.). They contain a plethora of information that will actually help you to avoid a lot of the problems. Read some threads on different ROMs & issues. You'll find a lot of "I had this problem" followed by the developer or someone else saying "Yeah, I fixed that" or "here's how to avoid/fix it". Utilize the search feature; it's there to help. The more research you do on your own the more you will learn and the less likely you'll get flamed by anyone for not trying to help yourself before asking for the help of others.
Welcome to the forums. Best of luck to you.
Kudos to you both I hope other noobs find this info as well. I think I'll flash KJ6 deodexed (faster/cleaner/more customizable right?) rooted. I don't really see the need for CWM or Titanium unless there's a ton of bloatware to remove, or I want to go crazy flashing ROMS - from what I gather, with CWM you can modify the recovery mode so that new roms can be installed right from the phone?
I have really looking for some specific key features that would improve my experience, such as a customizable destination folder for camera pics, i.e. SD card, not internal memory, a good all-time gestures program, wifi file sharing w/ pc, some cool widgets and animations, and a major reduction in the spyware content and background data of the phone, specifically google apps that try to sync my entire brain.
Farlander said:
...from what I gather, with CWM you can modify the recovery mode so that new roms can be installed right from the phone?
Click to expand...
Click to collapse
Basically, but you always have to be careful when doing so. Make backups of your data and follow the instructions carefully unless you really enjoy losing important files and using Odin lol.
I have really looking for some specific key features that would improve my experience, such as a customizable destination folder for camera pics, i.e. SD card, not internal memory, a good all-time gestures program, wifi file sharing w/ pc, some cool widgets and animations, and a major reduction in the spyware content and background data of the phone, specifically google apps that try to sync my entire brain.
Click to expand...
Click to collapse
I already thought the default destination for Camera pictures was in sdcard/DCIM ? And for cool widgets and animations, you are better off using a custom Launcher, such as GO Launcher EX. A ton of roms on here, however, do offer very nice looking themes and many remove bloatware.
My advice: get comfortable with CWM and flash a few roms; however many you need until you know you're preferences.

[Q] UCLA3 stock kernel and modem on Rogers Skyrocket?

Want to put the new kernel and radio on my Rogers 727R which is rooted, stock and CWM. The reason not putting on the whole ROM is that I will lose Rogers specific features, including hotspots without mods, and also NFC which I think is also Rogers specific.
My question is, when I install the new UCLA3modem.zip and the new UCLA3_stock_kernel.zip, will they work with my existing Rogers ROM and retain those features.
Also is there a specific order I should put them on, or does it not matter.
I'm not sure if those features are in the Kernel, or in the ROM.
Thanks
i asked the exact same question a coupe days ago, i was told it would work but will disable the rogers specific features
Correct me if I'm wrong, but didn't you ask about installing the ROM. I'm asking about installing only the Kernel and Radio. So in effect, I'm asking, are the Rogers-specific features (wifi hotspot and NFC) located in the ROM, or in the Kernel.
harry_fine said:
Correct me if I'm wrong, but didn't you ask about installing the ROM. I'm asking about installing only the Kernel and Radio. So in effect, I'm asking, are the Rogers-specific features (wifi hotspot and NFC) located in the ROM, or in the Kernel.
Click to expand...
Click to collapse
I'm not sure if the NFC ability is part of the Kernel, the ROM, or both, but if you install the ROM, you will not have the "NFC" menu available even if NFC does continue to work with the phone. So, the best way to know if the kernel itself (and not the ROM) will mess up you hotspot and NFC is to do a nandroid backup and thry to flash the kernel. If it doessn't work, you can always restore your nandroid to exactly the place you made the backup from. The reason I suggest this is because it seems the kernel has a slightly different effect for different people so even if someone told you one thing...it may not apply to your situation. Hope this helped. The radio should not make a difference with the things you are concerned with, but if you flash the radio, you will need to relash a different radio (or the same you have now) if you don'y like it, because the radio lives in its own place and needs to be flashed by itslf.
I am on rogers as well and I flashed the new modem and kernel seperately and together and as a Rogers user I honestly didn't see a speed boost on my end. I did two speed tests one with the da_g .3 rogers kernel with the rogers modem and got at least 2.5 mbps faster than the updated kernel and modem combo. Just my 2¢ on the subject.
Sent from my SAMSUNG-SGH-I727 using Tapatalk
Flash tpc v3, or any other Rogers based rom, u will still have ur hotspots and nfc. Any of dags kernels (0.3, or the one included in the tpc v3, 0.43pre2) or the stock Rogers kernel will still work with nfc and stuff. Stay away from faux kernels as their wifi tethering has been disabled. I personally recommend u avoid the UCLA3 modem and kernel as in my experience it doesn't increase speed o
or reception on Rogers network, its actually worse

How Do I Find Out Which EXACT Modem I Have?

It's obvious when I look at my baseband that my modem is very dated... which is funny, cause I thought I updated it recently. (6 months ago or so... i guess i was wrong or flashed the wrong one)
I know that my modem is of the ep1 variety, but I don't know exactly which.
Baseband version
i510.06 V.EP1
sch-I510.EP1
I don't know how to take that information or expound on it to see where I'm at.
I have an FP5 Kernel, and I would like to get a modem to match it, but I don't want to screw anything up by flashing the wrong builds or in the wrong sequence.
Can anyone help or advise?
dismiss request
Nevermind guys. I am on an FP5 modem now.
I took a chance that I could flash from any ep1 to any ep5.
So I ODIN flashed to EP4D.
I then CWM patched to FP1 and then CWM patched again to FP5.
Everything seemed to go off without a hitch.

Updating my p509 from 2012/2013

I purchased an Optimus T (P509) in 2012 and had it unlocked to use on a trip I went to europe. I played around with it a lot and messed with custom roms and basebands, and then left it alone for about a year. I'm now downsizing my phone/tech collection in general and looking to update this to use as a daily driver.
Here's the info about my phone:
ClockworkMod recover v5.0.2.0
Baseband: LGP509AT-00-V10l-OPEN-COM-OCT-23-2010
CyanogenMod version: 10-20130108-UNOFFICIAL-p509
Build number: cm_p509-userdebug 4.1.2 JZO54k eng.arjen.20130108.030427 test-keys
My questions are:
What updates to baseband (if any) do I need to do? Would this mess up my unlock?
Do I need to flash a new recovery?
What ROM would be best for my needs as a daily driver? requirements are stable without crashes and everything works, followed by the newest android version.
Really the rom part I can experiment with later, I'm just not sure if I've hosed myself with the baseband 'fixes' that I recall messing with 2 years ago. I have a new sim card on the way that I will use with this.
shivanani said:
I purchased an Optimus T (P509) in 2012 and had it unlocked to use on a trip I went to europe. I played around with it a lot and messed with custom roms and basebands, and then left it alone for about a year. I'm now downsizing my phone/tech collection in general and looking to update this to use as a daily driver.
Here's the info about my phone:
ClockworkMod recover v5.0.2.0
Baseband: LGP509AT-00-V10l-OPEN-COM-OCT-23-2010
CyanogenMod version: 10-20130108-UNOFFICIAL-p509
Build number: cm_p509-userdebug 4.1.2 JZO54k eng.arjen.20130108.030427 test-keys
My questions are:
What updates to baseband (if any) do I need to do? Would this mess up my unlock?
Do I need to flash a new recovery?
What ROM would be best for my needs as a daily driver? requirements are stable without crashes and everything works, followed by the newest android version.
Really the rom part I can experiment with later, I'm just not sure if I've hosed myself with the baseband 'fixes' that I recall messing with 2 years ago. I have a new sim card on the way that I will use with this.
Click to expand...
Click to collapse
1 - Actually upgrading baseband on that device would lock you out of some frequencies the radio ( not the FM radio ) uses to communicate with the carriers towers. I also have a Optimus T ( P509 ), tho no longer in service.
2 - Depends if you want KitKat ( 4.4 ). If you do then you'll need CWM 6.0.4.4 or newer. I am currently working on a utility for older CWM versions to be able to install KitKat but until then you'll need what I just mentioned. If not too interested in KitKat then you can leave your recovery as is. I use CWM 5.0.2.7 Touch by @vivekkalady. I've been using her recovery since she introduced it.
3 - You'll have to search and make that decision for yourself as we all have different needs and habits.
shinobisoft said:
1 - Actually upgrading baseband on that device would lock you out of some frequencies the radio ( not the FM radio ) uses to communicate with the carriers towers. I also have a Optimus T ( P509 ), tho no longer in service.
2 - Depends if you want KitKat ( 4.4 ). If you do then you'll need CWM 6.0.4.4 or newer. I am currently working on a utility for older CWM versions to be able to install KitKat but until then you'll need what I just mentioned. If not too interested in KitKat then you can leave your recovery as is. I use CWM 5.0.2.7 Touch by @vivekkalady. I've been using her recovery since she introduced it.
3 - You'll have to search and make that decision for yourself as we all have different needs and habits.
Click to expand...
Click to collapse
That's interesting what you said about the current baseband, I'm not sure if I changed it after I last used it. But I turned off airplane mode and popped in a T-mob sim and it wasn't able to connect to a network, similar results with H2O wireless card (at&t mvno). I'm not sure if my current version of android is messed up or the baseband.
I don't mind upgrading CWM, is there any downside to doing so? Is there a kitkat build out now that works? I may want to use KitKat as I hear it's meant to be more usable on smaller memory systems like the p509.
I don't mind finding one I like eventually, but looking for a recommendation to start off with that should work without too much difficulty.
Thanks for you help so far, I hope if can figure out this cell network problem :-/
shivanani said:
That's interesting what you said about the current baseband, I'm not sure if I changed it after I last used it. But I turned off airplane mode and popped in a T-mob sim and it wasn't able to connect to a network, similar results with H2O wireless card (at&t mvno). I'm not sure if my current version of android is messed up or the baseband.
I don't mind upgrading CWM, is there any downside to doing so? Is there a kitkat build out now that works? I may want to use KitKat as I hear it's meant to be more usable on smaller memory systems like the p509.
I don't mind finding one I like eventually, but looking for a recommendation to start off with that should work without too much difficulty.
Thanks for you help so far, I hope if can figure out this cell network problem :-/
Click to expand...
Click to collapse
Either your APN settings are wrong, which you can manually fix, or you did upgrade/downgrade/change baseband. The P509 is supposed to be an old baseband phone. The P500 and P509 are identical. Only difference is the P500 is a new baseband device. You can flash a P500 ROM. If you don't get any signal, then most likely your on old baseband. There is a patch for that, no biggie. If you do get signal then you're on new baseband and you should continue to use P500 ROMs. If you decide to flash a P509 ROM you won't have any service which will be a baseband issue. There is a new baseband patch around here somewhere too.
You can find a link to the old baseband patch in the LG Optimus One FAQ. Post #8 or #9, I think.
shinobisoft said:
Either your APN settings are wrong, which you can manually fix, or you did upgrade/downgrade/change baseband. The P509 is supposed to be an old baseband phone. The P500 and P509 are identical. Only difference is the P500 is a new baseband device. You can flash a P500 ROM. If you don't get any signal, then most likely your on old baseband. There is a patch for that, no biggie. If you do get signal then you're on new baseband and you should continue to use P500 ROMs. If you decide to flash a P509 ROM you won't have any service which will be a baseband issue. There is a new baseband patch around here somewhere too.
You can find a link to the old baseband patch in the LG Optimus One FAQ. Post #8 or #9, I think.
Click to expand...
Click to collapse
I wasn't certain what my starting point was since I'd done this so long ago (and I thought I applied the old BB fix at some point too...). Anyways, I took a drastic step and installed the stock rom V10s_00.kdz with the kdz installer from LG. It successfully flashed and I don't have a brick on my hands
The problem is now the phone doesn't recognize any sim cards, of which I've tried 3: tmobile micro, h2o micro, and a gophone minisim. The microsims were put in a cut out minisim as an adapter. The gophone is a normal minisim that is uncut, but it's not activated. I never got a locked or bad sim message, just that there is no sim card in place.
Under phone status it shows a signal strength (varies -65 to -75 and 25 asu)
Under APN settings it matches the T-mobile ones
And the baseband via secret menu is amss6038
I'm wondering if the sim module or gsm module are messed up? I kinda want to try out the emergency calling but would rather not get the police involved
I messed up my SIM contacts when I left an adapter in there and pulled it a little too hard out! I removed the compression plate on the back and it works again. I'll have to get a small piece of electronic safe foam to apply pressure to the back of the SIM to keep it in proper position. (http://forum.xda-developers.com/showthread.php?t=2598308)
I'm interested in the kitkat build here: http://forum.xda-developers.com/showthread.php?t=2589303
If I were to want to use that, do I need to flash the baseband fix on top of the other install instructions? Anything special in terms of timing it at a certain point in the install process?
Thanks for your help so far, I forgot how much fun messing with android was :laugh:
shivanani said:
I messed up my SIM contacts when I left an adapter in there and pulled it a little too hard out! I removed the compression plate on the back and it works again. I'll have to get a small piece of electronic safe foam to apply pressure to the back of the SIM to keep it in proper position. (http://forum.xda-developers.com/showthread.php?t=2598308)
I'm interested in the kitkat build here: http://forum.xda-developers.com/showthread.php?t=2589303
If I were to want to use that, do I need to flash the baseband fix on top of the other install instructions? Anything special in terms of timing it at a certain point in the install process?
Thanks for your help so far, I forgot how much fun messing with android was :laugh:
Click to expand...
Click to collapse
Well, we still aren't sure if your device is new or old baseband. With the recovery you already have, flash CM10.1, CM10.2, or CM10.3 ( All JellyBean ). Latest CM10.2 builds can be downloaded here. Easiest way to work around the baseband thing is to figure out which ROMs, P500 or P509, that will give you cell service. Flash a P509 ROM. If no service then you upgraded baseband so you'll need to use P500 ROMs. Flash a P500 ROM and if no service then you're on old baseband and you should use P509 ROMs. Only difference between P500 and P509 ROMs is the P500 ROMs are NEW baseband and the P509 ROMs are OLD baseband.
As of now the only KitKat ROMs being build are for the P500. If you find you are OLD baseband, flash the oldbb fix from the FAQ I mentioned a couple posts back. Oh, and you'll need the newest CWM 6.0.4.4 or newer recovery to flash KitKat.
Hope all this helps...
shinobisoft said:
Well, we still aren't sure if your device is new or old baseband. With the recovery you already have, flash CM10.1, CM10.2, or CM10.3 ( All JellyBean ). Latest CM10.2 builds can be downloaded here. Easiest way to work around the baseband thing is to figure out which ROMs, P500 or P509, that will give you cell service. Flash a P509 ROM. If no service then you upgraded baseband so you'll need to use P500 ROMs. Flash a P500 ROM and if no service then you're on old baseband and you should use P509 ROMs. Only difference between P500 and P509 ROMs is the P500 ROMs are NEW baseband and the P509 ROMs are OLD baseband.
As of now the only KitKat ROMs being build are for the P500. If you find you are OLD baseband, flash the oldbb fix from the FAQ I mentioned a couple posts back. Oh, and you'll need the newest CWM 6.0.4.4 or newer recovery to flash KitKat.
Hope all this helps...
Click to expand...
Click to collapse
Well, I'm on the old baseband, the reason I know is I used KDZ to nuke it back to p509 stock! The more I read about kdz after I did it the more scared I got, but I lucked out and everything is fine now
The sim unlock is preserved, and I successfully rooted it with gingersnap. I don't have any sort of recover on it yet, it looks like CWM 6.0.4.4 does not work with older roms, just Kitkat based ones. So I'll do some more homework and figure out if I want to jump right into KK or try JB first.
Thanks for all your help, you gave me a quick jumpstart and brought back a lot of knowledge that was tucked away in the back corner of my brain!
shinobisoft said:
Well, we still aren't sure if your device is new or old baseband. With the recovery you already have, flash CM10.1, CM10.2, or CM10.3 ( All JellyBean ). Latest CM10.2 builds can be downloaded here. Easiest way to work around the baseband thing is to figure out which ROMs, P500 or P509, that will give you cell service. Flash a P509 ROM. If no service then you upgraded baseband so you'll need to use P500 ROMs. Flash a P500 ROM and if no service then you're on old baseband and you should use P509 ROMs. Only difference between P500 and P509 ROMs is the P500 ROMs are NEW baseband and the P509 ROMs are OLD baseband.
As of now the only KitKat ROMs being build are for the P500. If you find you are OLD baseband, flash the oldbb fix from the FAQ I mentioned a couple posts back. Oh, and you'll need the newest CWM 6.0.4.4 or newer recovery to flash KitKat.
Hope all this helps...
Click to expand...
Click to collapse
CM10.3
Sent from my GT-I9082 using Tapatalk

Categories

Resources