SetCpu Files. - Nexus S Q&A, Help & Troubleshooting

Ok so I want to start using setcpu because I have heard it helps save the heck out of your battery. Is there anyone with a killer battery saving set up backup file that I could maybe restore on my phone? Also if I'm using nstool for CPU settings should I stop if I'm using setcpu? Please though, if you have a killer battery profile, please upload it and share with the world! Thanks.
Sent using Tapatalk, you know, the free version.

Setcpu and nstools work around the same way. Use nstools and lower your CPU clock speed to you desired amount where performance is balanced.
Sent from my Nexus S using Tapatalk

You use setCPU instead of NStools. The battery saving is in the screen off profiles. I have found that it doesn't help all that much on this phone. Just use SmartassV2 and you should be set

rocket999 said:
You use setCPU instead of NStools. The battery saving is in the screen off profiles. I have found that it doesn't help all that much on this phone. Just use SmartassV2 and you should be set
Click to expand...
Click to collapse
What's the best screen off profile?
Sent using Tapatalk, you know, the free version.

Related

[Q] Set CPU profiles

ok, I have a rooted Evo 4G running Fresh 4.0 rom, what profile settings should i use in order too make the battery last , or just some other suggestions on maintaining battery life while keeping the phone running smooth.
thanx
frankie253 said:
ok, I have a rooted Evo 4G running Fresh 4.0 rom, what profile settings should i use in order too make the battery last , or just some other suggestions on maintaining battery life while keeping the phone running smooth.
thanx
Click to expand...
Click to collapse
Create a screen off profile & set it to 245/245 max/min with smartass governor or conservative. When I was using SetCPU, I undervolted so that while my screen was on, the max was ~600. For the most part I rarely needed it any higher than that for my usage. However if you want to keep it at 998 or above, you will still benefit from a screen off profile.
I only run AOSP, so Sense may need more juice with the screen on.
plainjane said:
Create a screen off profile & set it to 245/245 max/min with smartass governor or conservative. When I was using SetCPU, I undervolted so that while my screen was on, the max was ~600. For the most part I rarely needed it any higher than that for my usage. However if you want to keep it at 998 or above, you will still benefit from a screen off profile.
I only run AOSP, so Sense may need more juice with the screen on.
Click to expand...
Click to collapse
Awesome, ill give this a shot, thank you much
Sent from my PC36100 using XDA Premium App

Battery Calibration

Didn't see this posted yet in the apps section, there is an app which helps in calibrating your battery. The app is located in the market and is created by an XDA member all credit goes to him. You must be rooted for this app to have an effect, I can vouche for this app as I have used both on the EVO and now on the G2X I have experienced great battery life after using this in conjunction with setcpu.
Berat said:
Didn't see this posted yet in the apps section, there is an app which helps in calibrating your battery. The app is located in the market and is created by an XDA member all credit goes to him. You must be rooted for this app to have an effect, I can vouche for this app as I have used both on the EVO and now on the G2X I have experienced great battery life after using this in conjunction with setcpu.
Click to expand...
Click to collapse
and its called..........
sent from my G2X with no regrets
rich2thad said:
and its called..........
sent from my G2X with no regrets
Click to expand...
Click to collapse
Says it right in the thread title
Sent from my LG-P999
that,setcpu and juice defender= hollycowmybatterylastsforever.
jdaclutch said:
that,setcpu and juice defender= hollycowmybatterylastsforever.
Click to expand...
Click to collapse
Out of curiosity, what are people using for the settings on SetCPU (ie max and max). Also, I noticed the "Scaling" option is grayed out on my G2x over my old Nexus One. Does the scaling option require a custom kernel I am guessing? Thanks.
Also, What settings are you guys using for Juicedefender?
I guess that a good reason to root.
I guess that a good reason to root. I want to get as much battery life as i can get.
I am new to posting but been a long time reader.
waiting for my new phone to get here tommorrow and I am actually off from work tommorrow so I have a long time to get to know my new phone.
Upgrading from a rooted G1
Does it matter if the phone is on or off when you charge it to full the second time?
jimbo831 said:
Out of curiosity, what are people using for the settings on SetCPU (ie max and max). Also, I noticed the "Scaling" option is grayed out on my G2x over my old Nexus One. Does the scaling option require a custom kernel I am guessing? Thanks.
Click to expand...
Click to collapse
All scaling does is how the CPU scales itself(to a given formula depending on the profile) for example if using a conservative scale the CPU scales itself by 15mhz depending on the task so if your min is 218 it would go up or down by 15 until it reaches the maximum or min. Since no kernals are available yet for our device it will use the default scaling profile built in. my screen off profile is a Max 218 Min 218 with a priority of 100. Regardless of the scaling profile selected I am forcing the CPU to down clock to that set of perimeters
So what I use for SetCPU is
Profile : Screen off
Max 218
Min 218
Priority 100
You dont get lag when unlocking with these settings?
Berat said:
All scaling does is how the CPU scales itself(to a given formula depending on the profile) for example if using a conservative scale the CPU scales itself by 15mhz depending on the task so if your min is 218 it would go up or down by 15 until it reaches the maximum or min. Since no kernals are available yet for our device it will use the default scaling profile built in. my screen off profile is a Max 218 Min 218 with a priority of 100. Regardless of the scaling profile selected I am forcing the CPU to down clock to that set of perimeters
So what I use for SetCPU is
Profile : Screen off
Max 218
Min 218
Priority 100
Click to expand...
Click to collapse
Sent from my LG-P999 using XDA App
Hi
k0shi said:
You dont get lag when unlocking with these settings?
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
No, i have the same settings and even with those settings i can listen to music and have led notification with no problems, and than right when you turn the screen on, depending on your settings of course, will bring the max right back too 1000.
Yeah it lags when I turn on the screen need to press power like 3 times
Sent from my G2x
slickerxcuh said:
Yeah it lags when I turn on the screen need to press power like 3 times
Sent from my G2x
Click to expand...
Click to collapse
I get the same, so I use 216-312 sleep profile and no problems.
how did you guys get setcpu to work when i pick a profile after launch it force closes.
charlieb620 said:
how did you guys get setcpu to work when i pick a profile after launch it force closes.
Click to expand...
Click to collapse
Re-install and when u first open it make sure u click
Nvidia Tegra 2
Sent from my LG-P999 using XDA App
From what I can tell all this app does is delete the battery stats from the system which we can do from CWM on our own. Am I missing something?
hiko36 said:
From what I can tell all this app does is delete the battery stats from the system which we can do from CWM on our own. Am I missing something?
Click to expand...
Click to collapse
From what i've heard it doesn't work doing it from CWM.
Jeffro64 said:
From what i've heard it doesn't work doing it from CWM.
Click to expand...
Click to collapse
We could just do it using Root Explorer then.
/data/system/batterystats.bin

[Q] SetCpu help!!

"Third -(Root Needed) Set CPU. Have had this on my G1 and N1 and it does nothing but save battery. I currently have it set on 216 - 1000 for when the screen is on and the only profile i have is for when the screen is off and it is at 216-216.
(Alternative) Pimp My CPU. I now am using this for my G2x because I am running custom kernal. Personally I like Set CPU better, but do to the fact that Set CPU can't get past 1000 MHz makes it kinda useless for the G2x Tegra 2. "
This is for the thread "Twenty Hour Of Battery Life" When he says he currently has it set on 216-1000, is he using the "Pimp My CPU"? Also where is that set at exactly? Is it set on the "Main-Scaling Driver" When you open up SetCpu? My "Scaling" is greyed out, I can not set it to "OnDemand" or anything, and yes my phone is rooted, it was the first step in that thread. Both Min, and Max go from 122, 128,245, and 528mHZ, so I am confused on this 216-1000? Also When I go to create a profile, and choose "Screen Off", I have the same issue as above, 216-216? What is that??? Be specific, and I am not a stranger to rooting, etc, so help me out, so I can on to the next step and install "Battery Calabration"
Gv2004 said:
"Third -(Root Needed) Set CPU. Have had this on my G1 and N1 and it does nothing but save battery. I currently have it set on 216 - 1000 for when the screen is on and the only profile i have is for when the screen is off and it is at 216-216.
(Alternative) Pimp My CPU. I now am using this for my G2x because I am running custom kernal. Personally I like Set CPU better, but do to the fact that Set CPU can't get past 1000 MHz makes it kinda useless for the G2x Tegra 2. "
This is for the thread "Twenty Hour Of Battery Life" When he says he currently has it set on 216-1000, is he using the "Pimp My CPU"? Also where is that set at exactly? Is it set on the "Main-Scaling Driver" When you open up SetCpu? My "Scaling" is greyed out, I can not set it to "OnDemand" or anything, and yes my phone is rooted, it was the first step in that thread. Both Min, and Max go from 122, 128,245, and 528mHZ, so I am confused on this 216-1000? Also When I go to create a profile, and choose "Screen Off", I have the same issue as above, 216-216? What is that??? Be specific, and I am not a stranger to rooting, etc, so help me out, so I can on to the next step and install "Battery Calabration"
Click to expand...
Click to collapse
20 Views and no response, great...
20 views and no response because no one can understand what you typed
Sent from my LG-P999 using XDA App
tackleberry said:
20 views and no response because no one can understand what you typed
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
Haha What typed is pretty simple to understand. I have the app SetCpu and when you open up, you are at the "Main" Tab, "Scaling" is greyed/blacked out, I can not set it to On Demand or Conservative. My phone is rooted, and SetCpu has Root Access.
Now how come scaling is disabled? Also, when the person who created the thread "Twenty Hour Battery Life" said he currently has it set to 216-1000, what does that mean? how do I set it to that? He also mentioned that he created profile for when the screen is off, and set it to "216-216", I do not understand what that means, and how to set it like that? I created a profile "Screen Off", but I am stuck at how to put it to "216-216"?
Ummmm. Iirc set CPU does not work on the g2x yet. Pimp my CPU should.
Sent from my LG-P999 using XDA App
Setcpu works fine he needs a custom kernel.. Like mordic or faux..
Sent from my LG-P999 using XDA Premium App
On my Nexus One here the only thing I have Setcpu do is when the screen is off it goes to min245 max 384. While using your phone Android regulates your processing power based off of what it needs. While Android does that when the phone sleeps I don't want it going above 384. With my Nexus One I usually get around 18hours + of battery life w/ medium usage. I didn't have my G2x long enough to try out Setcpu but IMO only have setcpu regulate your sleepmode
tackleberry said:
Ummmm. Iirc set CPU does not work on the g2x yet. Pimp my CPU should.
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
Why do people keep saying this? I guess the author of the app is lying when he says it is compatible and all the people running it successfully are lying also.
SetCpu supports Terga 2 starting with version 2.1.1a
I have no idea where you are getting you info, but you are wrong.
jcbofkc said:
Why do people keep saying this? I guess the author of the app is lying when he says it is compatible and all the people running it successfully are lying also.
SetCpu supports Terga 2 starting with version 2.1.1a
I have no idea where you are getting you info, but you are wrong.
Click to expand...
Click to collapse
I recall reading it here on xda. But that was over a week ago. Like I said iirc does not mean I'm 100% right.
Sent from my LG-P999 using XDA App
SetCPU does work with the tegra2 but I am not sure if it is playing nice with the custom kernels made by Faux and Morfic, that is why everyone is using Pimp My CPU
SetCPU works for scaling but not overclocking.
A great free app that DOES work with both of those kernels is CPU Master - find it on the market.
Thanks for clearing that up. I knew something wasn't right with set CPU onthis phone
Sent from my LG-P999 using XDA App
What are your settings for CPU Master for the Tmobile G2X? I want to get 20+hours at least, I am using Battery Calabaration from the Market and I charged the phone to 100%, opened up the app which required root access, tapped battery calaberate, then unplugged it, that was at 130 or 1:40, it is now 5:35pm, and it is at 76%, not lasting at all
Sent from my LG-P999 using XDA App
I used Titanium Back up to remove the extra apps that take up space and consume battery
Sent from my LG-P999 using XDA App
Gv2004 said:
What are your settings for CPU Master for the Tmobile G2X? I want to get 20+hours at least, I am using Battery Calabaration from the Market and I charged the phone to 100%, opened up the app which required root access, tapped battery calaberate, then unplugged it, that was at 130 or 1:40, it is now 5:35pm, and it is at 76%, not lasting at all
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
That's great battery life considering its a dual core tegra 2 phone which will always suck alot of battery juice . If you want a 20+ hour device then get a blackberry.
Android phones are known battery leeches. Look into a portable battery charger
Sent from my LG-P999 using Tapatalk
Setcpu does support tegra in G2X but currently does not support oc'ing. The scaling is greyed out on mine to but doesn't affect it sd i have seen.
So if your looking for settings use these for setcpu
Profile battery < 25%
Max 500
Min lowest
Reason: save battery amd extend phone usage
Profile sceen off
Max 1ghz
Min lowest
Reason: will drop to 216 if not using and is in idle but will jumo up if processing power is needed
Profile general (main screen)
Max 1ghz
Min 1ghz
Reason: makes cpu run full steam when using
Sent from my LG-P999 using XDA Premium App

Is there a program t change cpu speed when entering apapplications ?

Hi,
Looking for a program like setcpu which has profiles to change the cpu speed when entering specific application.
For example, if i use kindle i want to lower the cpu speed to save power.
Thanks.
Raanan.
If you have a supported kernel and using setcpu you can use the interactive governor.
Sent from my Transformer TF101 using XDA Premium App
i think tasker can
This could help:
www.appbrain.com/app/mr-nice-guy-app-prioritizer/soapbox.sym3try.mrniceguy
Regards
RaananM said:
Hi,
Looking for a program like setcpu which has profiles to change the cpu speed when entering specific application.
For example, if i use kindle i want to lower the cpu speed to save power.
Thanks.
Raanan.
Click to expand...
Click to collapse
Thats what governors are for.
Sent from my TBolt using my f***king thumbs...

[Q] Safe Overclock

Hi yes im new but not quite a noob :cyclops:
There with that out of the way my overclock settings are 1200mhz min 1600mhz max
so far running great with the HellyBean rom
But how would this effect my phone long term if any and I would like to be able to moniter my cpu temp like I do on my pc
but the thread http://forum.xda-developers.com/showthread.php?t=1140371&highlight=cpu+temp
has some good apps but they don't say cpu temp just the battery temp unless there interlinked some how
Thanks for looking
No temp sensor on the infuse except for battery.
1200 is really high for a minimum... This should be 100. For performance set governor to ondemand.. This will Max the cpufreq on any load. When idle, freq will drop and save battery and cool phone.
Running for extended periods at 1600 your phone will get very warm to the touch.. Combo of cpu and screen... If plugged into charger that will add more heat.
Battery Monitor Widget is a good app for tracking battery temp and related stats over time.
Sent from my SAMSUNG-SGH-I997 using xda premium
Thanks ya I figured it was a bit high
Do 100 min and 1400 max
And governor to on demand
Also i set up profiles with set cpu so when screen is off the maximum goes down to 400mhz.then screen on profile the max is 1400.it saves battery
Sent from my SGH-I997 using Tapatalk 2
How do you set up profiles?
Sent from my SGH-I997 using xda app-developers app
Use a CPU manager like SetCPU ($). Voltage Control or Antutu CPU Mgr may also have profiles.. Not sure -it's been a while since I used either.
Sent from my SAMSUNG-SGH-I997 using xda premium
The only ones I found so far that have profiles are pay for but once I get one I think its going to be either ROM manager or antutu
Sent from my SGH-I997 using xda app-developers app

Categories

Resources