Hi, I have a Nexus S i19020A that I bought off someone. It came with ICS and I have been using it for a good 2 months. Just a couple days ago, I received an update for Jelly Bean on my phone and figured it would be safe to update it, so I did. After the update, the phone restarted and rebooted but my settings would not run. Every time I try to go into settings, I get this message, "Unfortunately, Settings has stopped.". I tried to factory reset the phone back to ICS using the recovery mode but all it did was erase all my apps as if it was taken out of a brand new box but the problem remained as well as the Jelly Bean. I would like to return the phone back to its stock. I am a total noob when it comes to android phone since this is my first android phone and it came with ICS already. Would someone be able to walk me through step by step on how to return my Nexus S back to stock or fix the settings app problem? I would appreciate it if someone were able to help me. I also have skype if it makes it easier to walk me through the process. Thanks for taking the time to read my post.
Go to https://developers.google.com/android/nexus/images
Find your NexusS version (ICS 4.0.4) and flash it. Then feel free to update or not to jelly bean. (The system will download the upgrade automatically)
All instructions are in the same page
Sent from my Galaxy Nexus using xda premium
Thanks for replying back to my post. Unfortunately, I can't seem see Android on my device manager on my computer maybe because I can't get access to my settings to turn on my usb debugging mode. I also can't get turn on wifi as well on my phone to download an app that will help me enable it. I can't use fastboot on my computer to flash my phone if it cant detect the device. Do you have any ideas to get around this? Thanks
Do you have exclamation marks in Device Manager when you connect your phone?
Hi ekerazha!
Thanks for replying to my post. I actually somehow managed to get my phone installed properly onto my computer and my device manager shows android now. With that said, I was able to use fastboot to unlock my phone and fix my problem and reverting back to ICS ROM instead of the Jelly Bean ROM. Im still debating if i want to update my phone to JB ROM but im afraid it might screw it up again. But thanks again for replying. I really appreciate it.
Yes you can update. Your problem was special (may be something u ve installed). There is no raison now u have flashed your data to get Setting error again.
Sent from my Galaxy Nexus using xda premium
Hi guys,
I just bought a new Coby Kyros MID8127 tablet (A8, Android 2.3) for my friend.
Now, I want to flash a custom ROM with JB on it, but I just did not find any ROM, CWM or tutorial for that here at XDA (or elsewhere).
Is it possible, that there is no custom ROM for that tablet to have?
Thank you in advance.
Greetings,
sYCO
I have the same tablet and I bought a custom ROM from the people at KTZ, however, I could not install this ROM successfully, in order to install it I had to take the tablet to factory reset state and then delete a bunch of system applications to make room for the new ROM because the ROM does not allow you to install it from a formatted system partition (it's more like an upgrade). But when I finally installed the ROM it wuold not boot a second time; what that means is that, after installation the ROM boots normally but if I reboot it gets caught in a loop where I just see a blue disk spinning and it doesn't do anything else and the only way to get it out of that loop is to connect the USB cable and boot to recovery via adb and restore the backup that i did before flashing the new ROM. I tried to get help from the guy who makes these ROMs but he wasn't very helpful. I followed all his instructions and always got the same result.
I managed to install manually most of the components of this ROM through a long process of trial and error and left out the components that make the tablet misbehave and now I have a hybrid on my tablet which works pretty well with the exception of the wifi. The wifi works but at times is painfully slow.
I tried other ROMs from Android Tablet forums (check here). There is an ICS Rom there (or more than one, I don't remember) and also a JB ROM for the 8127 but I could not make them work on my tablet. The ICS ROM installed fine and runs very fast but it keeps freezing so I uninstalled. The Jelly Bean did not install properly and it was very hard to get the tablet to a working state after it bricked.
That was a while ago and I haven't checked lately if there is something else out there.
leunam12 said:
I have the same tablet and I bought a custom ROM from the people at KTZ, however, I could not install this ROM successfully, in order to install it I had to take the tablet to factory reset state and then delete a bunch of system applications to make room for the new ROM because the ROM does not allow you to install it from a formatted system partition (it's more like an upgrade). But when I finally installed the ROM it wuold not boot a second time; what that means is that, after installation the ROM boots normally but if I reboot it gets caught in a loop where I just see a blue disk spinning and it doesn't do anything else and the only way to get it out of that loop is to connect the USB cable and boot to recovery via adb and restore the backup that i did before flashing the new ROM. I tried to get help from the guy who makes these ROMs but he wasn't very helpful. I followed all his instructions and always got the same result.
I managed to install manually most of the components of this ROM through a long process of trial and error and left out the components that make the tablet misbehave and now I have a hybrid on my tablet which works pretty well with the exception of the wifi. The wifi works but at times is painfully slow.
I tried other ROMs from Android Tablet forums (check here). There is an ICS Rom there (or more than one, I don't remember) and also a JB ROM for the 8127 but I could not make them work on my tablet. The ICS ROM installed fine and runs very fast but it keeps freezing so I uninstalled. The Jelly Bean did not install properly and it was very hard to get the tablet to a working state after it bricked.
That was a while ago and I haven't checked lately if there is something else out there.
Click to expand...
Click to collapse
Hey Guys,
Just found this link. Maybe you can try it out and tell me if it works for you.
http://www.androidtablets.net/forum...lly-bean-stock-lite-mid8127-rooted-gapps.html
jpapadami said:
Hey Guys,
Just found this link. Maybe you can try it out and tell me if it works for you.
http://www.androidtablets.net/forum...lly-bean-stock-lite-mid8127-rooted-gapps.html
Click to expand...
Click to collapse
Sorry, I gave that tablet back and cannot test it anymore. I rather recommend to buy an Ainol Novo 7 Crystal. It is cheaper, better and ****ing fast with a nice custom ROM support like CM 10, CM 10.1, Paranoid 3.0, Crystal-Fuse, ...
Btw, KTZ sucks totally.
Hey gang, I got this Flytouch 8 tablet last week, model number is BC1003, android version 4.0.4, baseband version 1.5rc4, kernel version 3.0.8+ [email protected] #68 Sat Dec 8 08:54:36 CST 2012, build number crane_bc1003-eng 4.0.4 IMM76D 20121217 test-keys.
I've tried several options to load the recovery partition, only way I can access the recovery is through the backup and reset menu in settings, if I try to do it with the device powered off and holding the menu and power it just boots normal. I've tried a number of options home+power, vol up or down + home, none work. When I do get into the recovery, I cannot scroll through the options only thing there is the android robot with a red triangle and an exclamtion point.
Recovery version says android system recovery 3e EVB-V13.
I also cant get the sd card to mount. I've tried refromatting it with fat32, fat16, ext3 ext4. everything I get a message saying sd card damaged. I've tried 3 different card and same thing.
Any ideas XDA friends? I would like to put a custom rom like AOSP or CM9 or CM10 on it and clockwork recovery if that is an option. I've searched the net high and low for roms, I find many for other Flytouch tablets, but not Flytouch 8. This is the allwinner A10 processor in this one.
Thanks for your help friends.
I
Same problem her with a rooted FT 8 (same as yours)
.
After reboot i get sd card damage error.. after give this da RW i can mount this card again in settings/ storage.
After a reboot i get alway the error sd card damage....
I can get CWM 6.02 on this flytouch but didn`t get any custum roms or CWM backup installed...so get back tio basic image file with Livesuite.
have same recovery : recovery 3e EVB-V13 but cannot do anything with it. It don`t react with all the combination button on my flytouch.
Hopefully you can?
Same problem her with my fluytouch 8 32GB any halp pleas.
Recovery menu
hi
I've got the same tablet from china, am stuck at same spot as you are all, but I figured out how to move through menu in recovery, use usb mouse or keyboard.... any news on some custom rom and installation on this lousy tablet would be appreciated......
Solved Recovery Issue.
Hey everyone. I found this thread today, I tried it and it works perfectly. http://forum.xda-developers.com/showthread.php?t=2189640
I also read somewhere that Allwinner A10 and A13 cannot be flashed using stock recovery, you must use a program like Livesuit to flash firmwares. You can flash custom roms using CWM once it's installed on your device.
fldave612 said:
Hey everyone. I found this thread today, I tried it and it works perfectly. http://forum.xda-developers.com/showthread.php?t=2189640
I also read somewhere that Allwinner A10 and A13 cannot be flashed using stock recovery, you must use a program like Livesuit to flash firmwares. You can flash custom roms using CWM once it's installed on your device.
Click to expand...
Click to collapse
thanks man, this is good news, first step forward in cracking this damn slow tablet....now we need decent rom to install, any ideas?
Possible bricked BC1003..
Hi there I've got the exact same tablet with you BC1003 Model Flytouch Allwinner A10 Superpad 8 1GB Ram version running Android 4.0.4 stock.
So after following guides and researching a lot I ended up trying to upgrade to Jelly Bean.
I got CWM 6.02 installed fine. So I started the flash process.
Firstly I backed up my stuff and then I did a wipe data / factory reset.
Then proceeded and installed the latest possible rom version which I found to be : AOKP JB 4.1.2 ALLWINNER A10.zip
So I installed that one and the process went fine.
Then I installed this compatibility pack : t05a-v3_compatibility_1.2.0.zip
It also went fine.
Then I installed this google apps pack : gapps-jb-20120726-signed.zip
And it also installed normally.
So I was ready to reboot my tablet and so I did.
It turned off and then on again and here we are :
I now notice the screen turn on but it never shows anything..
Before flashing it it would turn on and show the Android OEM screen, then show the android loading text and then turn off and on and show the locked screen which I had to unlock and enter my desktop.
I notice that the screen light follows that pattern so the system is running normally only I don't get to actually see anything on it.
Now I'm kinda stuck here.. I've installed LiveSuite but when I try to install the recovery.img I have from my backup it says invalid image..
Have I bricked it or is there a way out of this mess?
Actually it's not entirely bricked.. well I finally got it to work with LiveSuit 1.09 and managed to flash its firmware to a couple more roms.
1. sun4i_crane_t05a_20120409.img -> Ends up showing some messy stuff on the screen. Looks like the resolution is not correct.
2. sun4i_crane_futekoA90universal_20120531.img -> Shows lots of white stuff and colors switching jelly-like.. But still it doesn't work.
3. TAB360-364_Android_411_Jelly_Bean.img -> This is the official A10 Jelly Bean firmware for Yarvik TAB364 GoTab Gravity 8".. No wonder I still got back to the blank screen issue. I only notice the back light turn on and off following the pattern of normal functionality, only I'm not able to actually see it..
Well, at least I'm still able to keep flashing roms to it.. Any ideas?
I can't even find my stock rom to turn back to 4.0.4. Where exactly is it located in my recovery-mode backup?
Btw, in case it plays any part my tablet is 10.2''.
Any help would be greatly appreciated.
EDIT : Finally I figured it out! My correct stock rom is : sun4i_crane_bc1003.img
I found it through google and after flashing to it I managed to get my tablet at a working state. (ICS 4.0.4 ICS 4.0.3)
So, I'll now try to use more Jelly Bean roms without worrying about bricking it.
Oh, something I noticed that might help others too.. even though on the packaging it says Flytouch Superpad 8 Allwinner A10 this tablet model (BC1003) is actually the Flytouch Superpad 7 and that helped me find my correct rom. Keep that in mind from now on. I'll keep you updated if I succeed in booting to Jelly Bean.
Finally some success..
Well, I finally have some interesting updates on the subject.
I managed to get Jelly Bean to work (Versions 4.1.2 and 4.1.1) on my BC1003 tablet without a compatibility pack (still none has worked for me).
Details on 4.1.2 Version :
Rom File Name : AOKP-4.1.2-3.0.52-Revb.zip
System running smoothly with wifi working fine.
Sound is fine and no crashes occurred.
Touchscreen, screen rotation and camera do not work.
I noticed that I can't browse to my external sd card.. it doesn't seem to get mounted.
Details on 4.1.1 Version :
Rom File Name : cm10_a10_20120913.zip
System running extremely smooth with wifi working fine.
Sound is fine and I experienced no crashes.
Touchscreen, screen rotation and camera do not work.
Also could not mount my external sd card.
Important bug noticed : When I try to change the brightness of my tablet's screen it enters suspended mode no matter what I do and is not fixable. I had to reflash the rom to recover from that state.
I think most of the problems would go away if I found a compatible jelly bean compatibility pack for this tablet.
If anyone has any clue please let me know.
So far I've tried these with no luck :
t05a-v3_compatibility_1.2.0.zip
t05a-unk_compatibility_1.2.0.zip
907c_compatibility_1.2.0.zip
By the way the BC1003 ICS rom that I found to be working was actually not my manufacturer's and it was version 4.0.3 instead of 4.0.4 that my original one was.
So, @fldave612 if it's possible could you please backup and upload yours somewhere so that I can also have it?
EDIT: Actually I figured out that I had kept a good backup form my ICS 4.0.4 using clockwork backup/restore and switched back to that for now.
But I've kept a backup of my Jelly Bean installation too so it's very easy to switch to that now. I'll try again once we get a compatibility pack working.
I feel we're very close to completely upgrading to Jelly Bean now on this tablet. We only need a working compatibility pack.
How did you succeed to install these ROMs, I tried both, installation went OK, but after reboot, only black screen......
Sent from my GT-P5110 using xda app-developers app
baschelik said:
How did you succeed to install these ROMs, I tried both, installation went OK, but after reboot, only black screen......
Sent from my GT-P5110 using xda app-developers app
Click to expand...
Click to collapse
I just installed them without a compatibility pack. It's not the jelly bean build that fails.. it's just the compatibility pack.
I researched it a bit and starting to look for a compatibility pack that works on very similar tablets (10.2'' - 1024 x 600 - 1GB Ram).
I found some, and got it to boot without a blank screen. Some showed messy colors others seemed to be working fine but still no touch..
So until we get one working on our specific precious tablet, we're kinda stuck here..
The 4.1.2 version seemed to be working fine but without touchscreen it's pretty much useless.
We could live without a camera or screen rotation, but not without touchscreen..
I even figured out that I could browse to the external sd card by going to root and then storage folder.. instead of mnt..
Actually now I'm stuck with ICS 4.0.3 since the original backup I kept proved to not be working fine.. it kept on crashing all the time..
So if someone has the original BC1003 ICS 4.0.4 that came from the manufacturer please upload it somewhere and post a link here.
Also if someone works on it to create a touchscreen driver for the world would become more beautiful..
Go to this link: http://www.maixin-china.com/software-download.asp Scroll down about half way and go to the link for "MaPan F10B (Cortex A8 Flytouch 6 and Flytouch 8) Software". I used the newest one 11-28.
This is a firmware is the one for this tablet. Use Livesuit to flash it, it will restore the tablet back to 4.0.4 factory.
It is virtually impossible to brick an A10 tablet from what I'm reading because it can be flashed via usb and have to boot loader re-imaged.
This link is very helpful to flash via Livesuit: http://elinux.org/Hack_A10_devices
Hope this helps you all as much as it did for me. Hopefully in the near future some developers will build a CM10 or higher version that will work on this tablet, until then I'll use this rom with Clockwork recovery mod.
Moin @all
Ich have chrashed my tab too but the download link is dead.
Any ideas where ich can load the file ?
Sorry for my ****ty bad English :silly:
Gothfather
I've also got this tablet (BC1003) - thank you for all the useful information posted on this thread so far.
If I've understood correctly, it's possible to install custom firmware using LiveSuite but at the moment none of them fully support this tablet - is that right?
At the very least I'm looking for a way to increase the size of the internal memory partition - the stock partition table has this unnecessary virtual sdcard partition taking most of the 2GB internal memory...
i have one of these damn slow tablets
i watched a vid on youtube about how to remove the internal sd card it is so simple to do it only take like 3 mins and 7 screws ive done this and put a 16gb card in there
i cant post a link but heres the name of the vid "Flytouch 5 / Superpad 6 V10 - Disassembly - Access to internal TF"
it is not the same tablet but is pretty much the same
Tip use a knife to pop the caps off the outside i found this easier
try not to stab yourself.
thanks if i helped you out
noob
okay so i tried to install a new rom on my allwinner a10 bc1003 and ended up only booting a black screen i dont know what im doing as this is my first tablet an very little computer knolage but im interested i had seen in a post he used livesuit to flash the new rom.... i dont understand how that works if anyone could sit down and teach me that would be apriciated
---------- Post added at 12:21 PM ---------- Previous post was at 12:16 PM ----------
SolidSnakeGr said:
Actually it's not entirely bricked.. well I finally got it to work with LiveSuit 1.09 and managed to flash its firmware to a couple more roms.
1. sun4i_crane_t05a_20120409.img -> Ends up showing some messy stuff on the screen. Looks like the resolution is not correct.
2. sun4i_crane_futekoA90universal_20120531.img -> Shows lots of white stuff and colors switching jelly-like.. But still it doesn't work.
3. TAB360-364_Android_411_Jelly_Bean.img -> This is the official A10 Jelly Bean firmware for Yarvik TAB364 GoTab Gravity 8".. No wonder I still got back to the blank screen issue. I only notice the back light turn on and off following the pattern of normal functionality, only I'm not able to actually see it..
Well, at least I'm still able to keep flashing roms to it.. Any ideas?
I can't even find my stock rom to turn back to 4.0.4. Where exactly is it located in my recovery-mode backup?
Btw, in case it plays any part my tablet is 10.2''.
Any help would be greatly appreciated.
EDIT : Finally I figured it out! My correct stock rom is : sun4i_crane_bc1003.img
I found it through google and after flashing to it I managed to get my tablet at a working state. (ICS 4.0.4 ICS 4.0.3)
So, I'll now try to use more Jelly Bean roms without worrying about bricking it.
Oh, something I noticed that might help others too.. even though on the packaging it says Flytouch Superpad 8 Allwinner A10 this tablet model (BC1003) is actually the Flytouch Superpad 7 and that helped me find my correct rom. Keep that in mind from now on. I'll keep you updated if I succeed in booting to Jelly Bean.
Click to expand...
Click to collapse
okay im sitting at this point but i dont understand the flashing with livesuit
With the Windows utility "Phoenix Card" it is possible to burn the MaPan image mentioned above to a micro SD card. After inserting the micro SD card into the tablet and booting up the image will be flashed onto the tablet, indicated by a progress bar and a ticking sound.This works for our tablet, and should work for firmware for several Allwinner A10 and A20 tablets plus some other processor families (vimicro?).
where can i get Windows utility "Phoenix Card"
cant find 1 that works the inside says Yones toptech BC 1003 all winers A10
flusspferd said:
With the Windows utility "Phoenix Card" it is possible to burn the MaPan image mentioned above to a micro SD card. After inserting the micro SD card into the tablet and booting up the image will be flashed onto the tablet, indicated by a progress bar and a ticking sound.This works for our tablet, and should work for firmware for several Allwinner A10 and A20 tablets plus some other processor families (vimicro?).
Click to expand...
Click to collapse
hi ... i have a Yones toptech BC 1003 all winers A10 (superpad 8 / flaytouch) that im trying to fix...
after 3 days trying every possible firmware, and booting them from external sd card
all i could do was change de logo at boot start from (mapan to kosaco, to oem etc..)
than i had the idea of removing the internal sd card to look at it ...
and guess what it still runs the same with out no sd card in or out
so i thought ... the sd card was never read in the first place cause is damage or corrupted...
so on the 4th day im trying to format and partition the new internal sd card... hoping for the best.
so...
is the firmware installed in a built in memory ??
and how do i format the internall card TF card , and install all the software again
Problems with CWM v6.0.2.8
Sorry to interrupt people, but I'm quite new at this and I guess I made a mess....
I have a Flytouch Superpad VIII with A10 inside (BC1003), which is bricked.
Don't ask me how I got it this way, I guess **** happens.
Downloaded and installed CWM-based Recovery v6.0.2.8 only to find that on the log it cannot mount...
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache recovery/last log
My idea is that I probably used the wrong version of CWM, but if not the case, please tell me.
Anybody know a fix on this?
I've already intalled ADB drivers on my PC and at least I can communicate with my device using ADB.
Any help on unblocking the device and then flashing it would be greatly appreciated
Hello,
I have rooted my Xoom 2 ME and installed Safestrap 3.12 as explained here.
Apparently something went wrong after I tried to restore a backup to the Stock ROM Slot. I now have the Blue (instead of Red) Motorola Logo when I boot, followed by error messages telling me the "UI System" and "Configure" Applications have stopped.
Trying to solve the problem, I did a factory reset from the Stock Recovery Boot and now I see that I have lost all my Safestrap Backups and Slots.
So I have no backups to restore and no other Slots than the Stock ROM, which I cannot boot.
What are my options ?
Any help would be greatly appreciated.
Thanks.
A quick update on this
I'm having help form runandhide05 who is amazingly kind with me, answering all my questions in PM.
I have a Wi-Fi only 8.2 Xoom 2 bought in France so I have flashed this ROM : 0.268.4.MZ607.Retail.en.FR.
I could boot but when I tried to update OTA it failed. It downloads, start updating and fails so I am stuck in 3.2.2.
Also whenever I reach the page of an application in the Android Market, the Android Market quits.
Finally adb doesn't see my device.
I've tried flashing another ROM with the same result : 0.281.8.MZ607.NonEFIGSRetail.en.EU
All this is very new to me, I feel like I have learned a lot in 24 ours but I really have no idea were to go to solve this and feel like I am asking a lot to runandhide05 at the moment so if anyone as "qualified" as him had any idea to help it would be amazing.
… again runandhide05, thank you so much for all your help so far.
Problem solved !
The update succeeded when done via the "Motorola Device Manager" on PC.
After that I could use Google Play without it to quit and adb saw my device again.
I re-rooted and re-installed Safestrap with no troubles.
Hi, . . . I'm a Noob to Rooting, get that out of the way.
I just bought a used ASUS TF101A with KB dock off EBay to replace mine that suffered a premature death in a flood. I was running (poorly) the last version of ICS, 4.03 If I recall. This one was advertised as "Excellent" and it is very clean but stinking of cigarette smoke, except that the jerk EBay seller failed to mention that was Rooted and running KatKiss 4.4.4 which I hate, the desktop is essentially blank, there are like 6 apps in the library and no Google Play access.
While I do want to install a "Factory Image" of KitKat 4.4.4 as if it was a OTA install, I want to get this awful KatKiss off, even it it means going back to a restored last version of ICS so I can even use this TF101, which it is completely useless in this state with katKiss.
Not being familiar at all with Rooting and Flashing, can someone please help and direct me on how to:
1 - Remove KatKiss and restore it to at least a full Factory install of ICS with all the original apps, Play access ... well like it wold have been.
2 - OR preferably, install a "street" Factory Image of normal KitKat 4.4.4 - Is that possible at all?
Thanks so so so much and remember you're deal with a Noob.
VintageGuitarz said:
Hi, . . . I'm a Noob to Rooting, get that out of the way.
I just bought a used ASUS TF101A with KB dock off EBay to replace mine that suffered a premature death in a flood. I was running (poorly) the last version of ICS, 4.03 If I recall. This one was advertised as "Excellent" and it is very clean but stinking of cigarette smoke, except that the jerk EBay seller failed to mention that was Rooted and running KatKiss 4.4.4 which I hate, the desktop is essentially blank, there are like 6 apps in the library and no Google Play access.
While I do want to install a "Factory Image" of KitKat 4.4.4 as if it was a OTA install, I want to get this awful KatKiss off, even it it means going back to a restored last version of ICS so I can even use this TF101, which it is completely useless in this state with katKiss.
Not being familiar at all with Rooting and Flashing, can someone please help and direct me on how to:
1 - Remove KatKiss and restore it to at least a full Factory install of ICS with all the original apps, Play access ... well like it wold have been.
2 - OR preferably, install a "street" Factory Image of normal KitKat 4.4.4 - Is that possible at all?
Thanks so so so much and remember you're deal with a Noob.
Click to expand...
Click to collapse
1. If you un-install KatKiss it will be a huge mistake. There is no better rom for the tf101 than it except for the 5.1.0 version. If you follow the direction word for word from the OP it can't be beat. Tim is also one of the nicest and most helpful devs that I know.
2. No, it's not possible.
There is no "Factory Image" of KitKat 4.4.4. the latest ASUS update was Ice Cream Sandwich (ICS), Android 4.0.3.
My opinion is that the KatKiss ROM KitKat 4.4.4 is the best you can install on your TF-101:
http://forum.xda-developers.com/showthread.php?t=2592890
A clean install will most likely fix any concerns you may have on this ROM.
If you really want to downgrade to ICS, the easiest way will be to use Easy Flasher:
http://forum.xda-developers.com/showthread.php?t=1688012
You will need to install the APX Drivers:
http://forum.xda-developers.com/showthread.php?t=1514942
TF101 will need to be put into APX mode:
With the device off, hold down the volume up key and the power button at the same time for ~10-15 seconds. It will look like nothing happened but when you connect the cable from your TF101 to computer USB port the APX drivers will get recognized.
You really need to do some reading on the XDA forums before attempting to install anything on your TF101.