Database Info

Its Broke...

I was just saying how my GX2 was great and I wasn't plagued by any of the bugs when...... I restarted my phone and it will not read the sim now... I restored it and even used my wifes sim same thing does not read a sim ... can anything be done?

mikebionca06 said:
I was just saying how my GX2 was great and I wasn't plagued by any of the bugs when...... I restarted my phone and it will not read the sim now... I restored it and even used my wifes sim same thing does not read a sim ... can anything be done?
Click to expand...
Click to collapse
First time I've heard of this particular issue. I'm assuming that when you say you restored, you completely reflashed the original firmware. If this is the case, you're pretty much just left with the options of getting a replacement phone.

well i held vol down and power im downloading the firmware now and going to try that.. now it keeps bootlooping I havnt done anything to the phone just a simple reboot and i get the no sim symbol

mikebionca06 said:
well i held vol down and power im downloading the firmware now and going to try that.. now it keeps bootlooping I havnt done anything to the phone just a simple reboot and i get the no sim symbol
Click to expand...
Click to collapse
Do you have stock or custom recovery?

Ok well some good news in my panic i slid my wifes sim in wrong...it works with hers... I stuck my sim in her vibrant and get no sim as well phew... is it normal for a sim card to die?

If you zap it with static electricity by mistake, that'd be one way to kill it!

mikebionca06 said:
Ok well some good news in my panic i slid my wifes sim in wrong...it works with hers... I stuck my sim in her vibrant and get no sim as well phew... is it normal for a sim card to die?
Click to expand...
Click to collapse
Sim cards are extremely basic in design. Although they don't go bad too often since they're housed inside a phone, it doesn't take much to damage them.

the thing is the sim was in the phone i didnt touch it i hope this phone isnt going to start killing sims

UK SIM not working even though phone is Unlocked

Ok so I am in the UK right now for the summer. Before I left I unlocked my phone and when I got here I went and bought a pay as you go 3 SIM card since they offer all you can use data and all.
The guy at the store said to wait 20 min then call 444 to register the card. After 20 minutes or so I still had no signal on my phone. I went into settings > Wireless > Mobile > Select network and selected 3 but it said "this SIM card could not be registered on this network." Same thing if I selected automatically. So I decided to try a friends Vodaphone pay as you go card in my phone. The Vodaphone card works perfect, I can make calls, send sms, etc.
So I went back to the store the next day to see what they say. The employee put the SIM in her phone and it worked perfect, which means that there is something wrong with my phone.
I went back and decided to unroot then reroot and unlock. After encountering multiple problems with that I have finally gotten back to root and unlock but the 3 SIM card still does not work while the Vodaphone one does.
Is there anything I can do from here to get the 3 SIM to work?

What rom are you using?

sorry forgot to mention that. Right now I am on the stock rom and stock radio. I tried flashing another radio and using the SIM card on Leedroid and RCmix HD and nether of those worked.

Have you try selecting different band like EURO band (may be worth a try )

pakxelaos said:
Have you try selecting different band like EURO band (may be worth a try )
Click to expand...
Click to collapse
not exactly sure what that means, do you have a link handy, please? I am willing to try anything, as long as it does not brick my phone.

Open Phone Dialer
Dial: *#*#4636#*#*
Press Phone Information
Hit Menu
Choose Select Radio Band
Choose EURO Band
Turn on Airplane Mode for about 20 seconds and then turn it off

pakxelaos said:
Open Phone Dialer
Dial: *#*#4636#*#*
Press Phone Information
Hit Menu
Choose Select Radio Band
Choose EURO Band
Turn on Airplane Mode for about 20 seconds and then turn it off
Click to expand...
Click to collapse
No still did not work thanks though for trying. I also restarted the phone, reselected the EURO band and put on airplane mode but still nothing.
Any other suggestions?

dreshden said:
No still did not work thanks though for trying. I also restarted the phone, reselected the EURO band and put on airplane mode but still nothing.
Any other suggestions?
Click to expand...
Click to collapse
Have you tried the 3 SIM in a different phone perchance? It seems like the unlock and the Inspire are working as the Vodafone SIM worked.

I agree, maybe there's something different about that sim that the Inspire can't read it.
id10terrordfw said:
..
It seems like the unlock and the Inspire are working as the Vodafone SIM worked.
Click to expand...
Click to collapse

id10terrordfw said:
Have you tried the 3 SIM in a different phone perchance? It seems like the unlock and the Inspire are working as the Vodafone SIM worked.
Click to expand...
Click to collapse
Yes I took it back into the store to see what they would say/try to get a refund. They store employee put it into her phone and one of her coworker's phones and the it worked fine in their phones. I do know exactly what kind of phones they had since they were for sure Euro only models that I have never seen before but one of them was a Samsung with a touch screen and keyboard, much like a blackberry. Not really relevant to this, I think.
They would not give me a refund since it work in their phones. Which is why I am here stuck with a 3 SIM card and looking for help to get it fixed

Well that at least establishes where the problem is. When you boot the phone with the 3 SIM, does it give a "no sim" error, no signal at all , or no data access(voice/999 still work)?

When I first put in the sim it gives me a popup saying "Unable to detect your SIM card. Please make sure that your SIM card is properly inserted and restart the phone." It gives two options, Shut phone down and Restart. It also says this when I put the Vodaphone card back into the phone. I just have to restart the phone and I will have signal when I have the Vodaphone card in.
So I click restart. After it reboots, I have no signal (grayed out bars with a small 'x' above them). In my notification tray I have 2 new notifications. One saying that my SIM card has changed and another saying there is a sign in error to my gmail account.
If I click on the "SIM car changed" notification it gives me a pop up saying "You have insterted a new SIM card. Your phone will change the following settings according to your SIM card: bookmarks, shortcuts, wallpapers, ringtones, language selections, and input settings. Are you sure you want to replaces these settings on your phone?" Then it gives me 3 options, "Yes" "No, later" and "No."
I do not get any other notifications or error messages after a restart.

Backup your ROM then try flashing cm7 and see what happens, with the 3 SIM in the phone.
Sent from my HTC Inspire 4G using XDA Premium App

Ok I wiped everything and installed nightly #77 with the 3 SIM card in the phone the whole time. It has been 2 hours and I have not taken out the card yet and it is still not receiving service. So I have no idea where to go from here.
If there is nothing else I guess I will just have to suck it up and go spend some more pounds and get a Vodaphone card for myself.
Thanks for the help and if there is anything else you can think of for me to try please, I am open to all suggestions!

dreshden said:
Ok I wiped everything and installed nightly #77 with the 3 SIM card in the phone the whole time. It has been 2 hours and I have not taken out the card yet and it is still not receiving service. So I have no idea where to go from here.
If there is nothing else I guess I will just have to suck it up and go spend some more pounds and get a Vodaphone card for myself.
Thanks for the help and if there is anything else you can think of for me to try please, I am open to all suggestions!
Click to expand...
Click to collapse
If they won't swap it out for you than I would say that is the best bet. I know for a fact that cm7 supports 3. There has to be some other factor affecting it. Did you have the 3 guys try their SIM cards in your phone?
Sent from my HTC Inspire 4G using XDA Premium App

No they did not, that is the only thing. They never put their card into my phone.
*sigh* I was really hoping for unlimited data because that would have been soooo helpful to be able to use maps while wandering the city. I guess this just was not meant to be.
Thank you so much for all the help! I really appreciate it!

[q] no sim issue

Having a huge issue here need some help, I recently finally got my unlock code from ATT and was very happy, I applied my unlock code with a SIM I had at work and all was good, I will be traveling out of country and had an Ekit SIM decided to test with the phone, it worked fine, then I went to put in my ATT SIM (i had it cut for microsim size, so I`m using adapter, but never had issues) and now I get the little no SIM sign and no service, interesting part is that the signal bars seemed to go up maybe just cosmetic...
I was on the ICS and then went back to SkyICS which is 2.3.5 but my modem statyed on UCLA4, I found the older 3 modem and now it shows no bars but still SIM is not working, I tried multiple SIM cards and always show the SIM symbols and when I go to mobile networks it says SIM is not present. Please help me as this is my primary phone and Im stuck, I really wouldnt like to reset everything.

If it was me I'd make a nandroid backup, then ODIN flash the Samsung official stock I727 UCKJ2 2.3.5 firmware from sammobile here. After flashing stock, booted into stock e3 recovery and do a wipe data/factory reset and see if that resolves the 'no sim' issue. If the phone still doesn't recognize the AT&T sim, take it into an AT&T store and request a new sim card. If it's still borked even with a new sim card they should swap it under warranty.

cschmitt said:
If it was me I'd make a nandroid backup, then ODIN flash the Samsung official stock I727 UCKJ2 2.3.5 firmware from sammobile here. After flashing stock, booted into stock e3 recovery and do a wipe data/factory reset and see if that resolves the 'no sim' issue. If the phone still doesn't recognize the AT&T sim, take it into an AT&T store and request a new sim card. If it's still borked even with a new sim card they should swap it under warranty.
Click to expand...
Click to collapse
I guess I have to try to go to Stock, no choice here, I know its not the SIM tried in wifes phone and its fine, also that EKit SIM that just worked in the phone does not, could I some how damaged the SIM card holder ?

Sounds like it could be the sim slot. Anyway, if you put it back to stock you'll have not issues at the store when you swap it. Then restore your nandroid backup on the new phone.

cschmitt said:
Sounds like it could be the sim slot. Anyway, if you put it back to stock you'll have not issues at the store when you swap it. Then restore your nandroid backup on the new phone.
Click to expand...
Click to collapse
Only thing is I bought this phone on ebay back in January, its registered under my account and everything, and I got it brand new. I hope ATT will repair/replace under warranty. Sad thing is I was fighting with ATT for 2 weeks to get this phone unlocked and finally got it now I have to swap it and go thru the same process .
I dont get how this happened, this is not the first time I swap SIMs and all was good, I think its pretty hard to break a SIM slot, but I guess I did it some how. So Pissed off right now its not even funny

Just as a long shot, maybe try cleaning the sim card contacts with a pink pencil eraser. Sounds crazy, but I have a Garmin running watch and the contacts on the back sometimes get dirty and it won't sync with my PC, so I just 'erase' them a bit and it's back in action.
If AT&T won't do the warranty swap, Samsung will directly-- although that's a little more of a hassle. Good luck!

cschmitt said:
Just as a long shot, maybe try cleaning the sim card contacts with a pink pencil eraser. Sounds crazy, but I have a Garmin running watch and the contacts on the back sometimes get dirty and it won't sync with my PC, so I just 'erase' them a bit and it's back in action.
If AT&T won't do the warranty swap, Samsung will directly-- although that's a little more of a hassle. Good luck!
Click to expand...
Click to collapse
hmm you mean the SIM card it self right ? not the slot as the slot is covered ....

yozh said:
hmm you mean the SIM card it self right ? not the slot as the slot is covered ....
Click to expand...
Click to collapse
The card and the slot contacts, if you can get at them.
Also, you said the card is cut and in an adapter - maybe it's just not quite lining up with the slot pins. Try it with the card not quite fully pushed into the slot.

cschmitt said:
The card and the slot contacts, if you can get at them.
Also, you said the card is cut and in an adapter - maybe it's just not quite lining up with the slot pins. Try it with the card not quite fully pushed into the slot.
Click to expand...
Click to collapse
I just tried with every SIM I had including the same SIM that I was testing with and it was working, that one is not cut and is a full SIM and still no go, just the SIM symbol and NO SERVICE

yozh said:
I just tried with every SIM I had including the same SIM that I was testing with and it was working, that one is not cut and is a full SIM and still no go, just the SIM symbol and NO SERVICE
Click to expand...
Click to collapse
I cant even backup current ROM, it gets to somewhere on the data part and trows me back to recovery, been doing this for the last hour, getting really frustrated and tired !

Maybe it's time to punt and flash stock 2.3.5 with factory reset.

cschmitt said:
Maybe it's time to punt and flash stock 2.3.5 with factory reset.
Click to expand...
Click to collapse
Yep was able to backup and flash stock from here http://forum.xda-developers.com/showthread.php?t=1342348. still same no sim, I cleaned the SIM and the slot, even tried with some compressed air nothing all the same... I guess I`ll go to ATT store, do they usually replace phones on the spot ? I`m used to going to apple store where they just replace it... This really sucks !

I don't know if this will help, but have you tried manually inputting the APN for whatever carrier SIM you have at the moment? It's worth a shot
Edit: and are they LTE SIMS?
Sent from my SGH-I727R using xda premium

denenatse said:
I don't know if this will help, but have you tried manually inputting the APN for whatever carrier SIM you have at the moment? It's worth a shot
Sent from my SGH-I727R using xda premium
Click to expand...
Click to collapse
I would do that, but when I go to mobile networks I can't get to setting, it's says Insert sim to change mobile network settings.
The SIMs worked fine before yesterday. 1 is ATT lte 1 is not, but again it says no sim inserted.

Baseband says kj2?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

Ok went to ATT store, they sent me to att service center, got a new phone. Now the unlocking chase begings again!
Sent from my SAMSUNG-SGH-I727 using XDA

s3 new activation issue. Shows wrong phone number...

So I bought a used s3 on eBay. I received the phone with someone else's sim card in it which was already activated and worked to make calls and surf web. So I went to Verizon and got a new sim card and had them activate the phone under my account. However activation kept failing and after many attempts and factory resets and getting a second new sim card the phone finally activated. However 4g doesn't work and I get crappy in and out data service. I checked the about phone status and it shows someone else's phone number but has correct imei number. My old 3g phone was an HTC incredible and it became deactivated and kicked off the network so I assume the phone activated under my account... what is going on? How do I fix this?

Weird. Are you rooted? You could try flashing back to the original "VRLF2" build of Ice Cream Sandwich and then entering the re-provision code into the dialer.

It looks like that did the trick. I flashed back to the original ICS stock rom and popped my sim out, did a factory reset, put the sim back in, then booted it up and entered the reprovision code, when it came back up it finally had the correct phone number and it looks like 4g is now working.

https://www.google.co.in/url?sa=t&r...aXysP_U7ckhKGOJ1A&sig2=yHqmc-7iVzC_Usop7-sgvQ

nrdnandan said:
https://www.google.co.in/url?sa=t&r...aXysP_U7ckhKGOJ1A&sig2=yHqmc-7iVzC_Usop7-sgvQ
Click to expand...
Click to collapse
This is a 4 year old thread, kinda pointless for you to answer.
Sent from my SCH-I535 using Tapatalk

Stock JB Update Hosed up my radios?

I was blissfully working just fine on my MZ602 Xoom. I would pop the Micro SIM card out of my phone and into an adapter whenever I wanted to use the Xoom. It worked flawlessly.... that is, until I updated to JellyBean. Now the Xoom will not even SEE a SIM card.
I went to Verizon store today and the guy was about as helpful as diving gear in the sahara. He said you should not be able to pop a phone SIM into a tablet and it works... well that's BS cause I've been doing it for almost 2 years. "Well, then the update must have fixed a bug that allowed you to do that"... no duh sherlock... pop a SIM in from your repository and make sure the things even works still and I'll buy a tablet package. Well, he did and it did the same thing, no connection. "Not under warranty so, sorry man". Thanks for nothing, no I don't want a new tablet!
[/Rant]
I have since flashed the ICS radios and have the same issue. I have tried stock, non stock, rooted, non-rooted, Honeycomb with ICS radios, JellyBean radios.... nothign works, it no longer sees a SIM.
Previously when I popped in a SIM it would take a minute or two and then see signal, sometimes requiring a reboot, now it doesn't even recognize that a SIM was inserted. Before even if it wasn't picking up signal and I removed the SIM it would give a warning "SIM removed, reboot?" or somethign like that.
Currently running CM10.1 with the IMM76I radios. Works on WiFi but will not see any SIM card... am I hosed? Any help?!

Anyone?
How about this... Does anyone here still use their 4G Xoom on the Verizon network?

I plan to steal sim card from my wife ipad and try if I can find my sim adaptor. Will let you know.
I can tell you that my xoom no longer shows 4g network but always did before the update even though the sim card wasn't activated.
Sent from my Nexus 4 using XDA Premium 4 mobile app

compnird said:
I was blissfully working just fine on my MZ602 Xoom. I would pop the Micro SIM card out of my phone and into an adapter whenever I wanted to use the Xoom. It worked flawlessly.... that is, until I updated to JellyBean. Now the Xoom will not even SEE a SIM card.
I went to Verizon store today and the guy was about as helpful as diving gear in the sahara. He said you should not be able to pop a phone SIM into a tablet and it works... well that's BS cause I've been doing it for almost 2 years. "Well, then the update must have fixed a bug that allowed you to do that"... no duh sherlock... pop a SIM in from your repository and make sure the things even works still and I'll buy a tablet package. Well, he did and it did the same thing, no connection. "Not under warranty so, sorry man". Thanks for nothing, no I don't want a new tablet!
[/Rant]
I have since flashed the ICS radios and have the same issue. I have tried stock, non stock, rooted, non-rooted, Honeycomb with ICS radios, JellyBean radios.... nothign works, it no longer sees a SIM.
Previously when I popped in a SIM it would take a minute or two and then see signal, sometimes requiring a reboot, now it doesn't even recognize that a SIM was inserted. Before even if it wasn't picking up signal and I removed the SIM it would give a warning "SIM removed, reboot?" or somethign like that.
Currently running CM10.1 with the IMM76I radios. Works on WiFi but will not see any SIM card... am I hosed? Any help?!
Click to expand...
Click to collapse
Did you use Rogue recovery to flash the radios? TWRP and regular CWM don't flash the radios properly.

tselling said:
Did you use Rogue recovery to flash the radios? TWRP and regular CWM don't flash the radios properly.
Click to expand...
Click to collapse
Yes, used Rogue to manually flash ICS radios to no avail.
Previous load was 100% stock, unrooted on OEM bootloader and using stock recovery so the JB updated radios original flash was done properly.

I tried the Sim card from wife's iPad and it seemed to work OK. Although it seemed to connect a lot more to the 3g network than LTE and I have very song LTE signal. Radio doesn't seem quite as good as Previous.
Sent from my Nexus 4 using XDA Premium 4 mobile app