I have a Samsung Galaxy S I500 I want to flash over to straight talk I have the CDMA Workshop not sure how to use it either I'm a noob if I could get my phone in DM mode I would be good but I cant even get that far any help on this would very appreciated thanks in advance.
can i get a e-mail copy of your cdma workshop?
Related
I have Samsung Mesmerize I500.04
Build SCH-I500.EI20
Firmware Version 2.3.5
I'm using CDMA Workshop 3.8
Debug mode is activated.
I Installed Samsung Kies (Will not recognize phone)
At first the phone was recognized in CDMA Workshop and my only problem was being unable to get the SPC....
Now, CDMA workshop says 'phone failed to respond' and wont read anything!
Ive tried factory reset..
Ive tried re-installing drivers
resetting phone, and computer...
idk what else to do!!
I need to know how to make CDMA recognize the phone and then i need to retrieve the SPC as well so that I can make changes to the phone.
Any help would be greatly appreciated.
kevinjmckenzie said:
I have Samsung Mesmerize I500.04
Build SCH-I500.EI20
Firmware Version 2.3.5
I'm using CDMA Workshop 3.8
Debug mode is activated.
I Installed Samsung Kies (Will not recognize phone)
At first the phone was recognized in CDMA Workshop and my only problem was being unable to get the SPC....
Now, CDMA workshop says 'phone failed to respond' and wont read anything!
Ive tried factory reset..
Ive tried re-installing drivers
resetting phone, and computer...
idk what else to do!!
I need to know how to make CDMA recognize the phone and then i need to retrieve the SPC as well so that I can make changes to the phone.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
What exactly are you trying to do? if your just trying to reprogram the phone and it is attached to your line just USCC made it so all you have to do is *228 and it will automatically provision itself. I cant think of another reason why you would possibly want the spc code. I dont visit this forum often anymore so if you want a quicker reply go through my profile i guess to send message.
Still need help!
I PM'd you. Anyone else who has any ideas?
UPDATE: I just need to know how to make the phone respond to CDMA Workshop.
pmd you back... are you sure you have appropriate drivers installed?
is your phone in modem mode and dial up?
bought cdma workshop nov. 2011, free upgrade until nov. 2012. interested in transfering the license to you please leave a private message
Can someone please help me get my mrl for this phone need to switch prl because it runs on sprint network. I know i need to use cdma workshop though when i try to read or do anything it says failed phone dont answer
I want to flash the Pantech Breakout to work on PagePlus. I have rooted it with CWM recovery and read this thread for instructions to flash the Thunderbolt
http://forum.xda-developers.com/showthread.php?t=1294179
So far, I have,
-Verizon Pantech Breakout, clean, no issues
-New unactivated Verizon LTE sim card (if necessary)
-CDMA Workshop 3.9.0 demo
The questions I have are,
1. How to enter Diag mode in the Breakout?
2. To activate a new phone on PagePlus, it requires an ESN or MEID number. How can I get it before I place the activation? Can CDMA workshop identify the MEID number?
3. To acquire 3G data, I read somewhere that it might work if I obtain the MIN # from PagePlus after activation and use CDMA to write it. Is this correct?
4. Will there be a problem if the MEID # starts with 99000?
Any other roadblocks to consider?
Thanks for any help.
Rooted, but need to flash to PP
Can anyone help?
Ok ok... I would help but mimited data so let me hit up my man jason here. Not sure what he'll charge you
Sent from an Apple killing JellyBean
ota looping with sim card
I need help too. The sim card won't provision and keeps the 3G from working. I can see the signal in the signal meter menu but I cannot get the phone to think it's provisioned. That's where I'm stuck. HELP!!!:crying:
Gtalk me @ [email protected]
Sent from an Apple killing JellyBean
3G data needs
moparfreak426 said:
Ok ok... I would help but mimited data so let me hit up my man jason here. Not sure what he'll charge you
Sent from an Apple killing JellyBean
Click to expand...
Click to collapse
Ok, I used CDMA Flasher to flash to Page Plus 3 months ago. Verizon just issued an OTA update and I need to flash Page Plus again (I have also blocked future OTA updates). My problem is that I only had 1g data. I want to reflash with 3G data. CDMA Flasher support says they are working on 3G data for Page Plus, but it's not ready yet. Will it ever be ready? I don't know. How to flash Pantech Breakout to Page Plus (originally Verizon) with 3G data?
help while trying to unlock the boot loader i hard-bricked my galaxy s3 (sch-968c) it is through straight talk on the verizon network .if anyone could send me the debrick file for it I would greatly appreciate it (note: i have tried the verizon unbrick file to no avail)
also this is the closest forum to this phone as it it verizon's phone,but with no lte and with a different programming scheme
I flashed a SCH-i535 Galaxy S3 Verizon but cricket needs a ESN. I can't find it on the box or phone settings and the dialpad code doesn't work. I think its because I'm on Android 4.3. Programs such as CDMA workshop doesn't show the ESN in the proper format its like in hex. How does one go about this situation? I need help ASAP thanks!
elitehacker said:
I flashed a SCH-i535 Galaxy S3 Verizon but cricket needs a ESN. I can't find it on the box or phone settings and the dialpad code doesn't work. I think its because I'm on Android 4.3. Programs such as CDMA workshop doesn't show the ESN in the proper format its like in hex. How does one go about this situation? I need help ASAP thanks!
Click to expand...
Click to collapse
Take the battery off the back of the phone, I'm almost sure its there