My experience with flashing a custom rom - T-Mobile Sidekick 4G

yesterday, I flashed Mr. Kickstand's B2TB. Immediately upon flashing, I noticed things that I REALLY liked about it, and things about it I didnt care. for. I really like voodoo, because of the lagfix and the sound control. however, i didnt care for the lack of and inability to install themes. i dont care for the sidekick "default theme", and have been using the disguise theme for awhile now. i tried to figure out how to install the theme i wanted, but had no luck. before flashing, i took a backup of the stock rom. so i booted into recovery, and went to backup and restore>advanced restore. i selected the backup of the stock rom and hit restore system. so i now have the stock /system partition, which i had added a few apps of my own to prior to flashing. i also still have all the other main components of B2TB, which includes Voodoo recovery, lagfix, and sound control, and i also have the platypus egg kernel. i was able to keep voodoo sound control by copying the .apk to my sd card before restoring the stock /system partition. I also now have the aosp boot animation. it was laid over top of the samsung boot animation. i went to /system/media and renamed the samsung boot animation files. after renaming those files, i was left with the vanilla/aosp boot animation. when i reboot, the sidekick logo is displayed, and then the android logo. boot time is also a bit faster now. i also did not use the supercharger update that was integrated into b2tb,i which was update 8. instead, i used supercharger update 9, which has a lot more options than update 8. Mr. Kickstand, sorry if you think I massacred your rom, or if you think I didnt like it very much. Truth is, the best components of it imho is voodoo and the platypus egg kernel. But I think I am very happy with this phone now.

Related

[Q] Rooted EVO needs help after new kernel flashed.

I rooted my HTC EVO, then wanted a new kernel for better battery, wanted the new gingerbread ROM too but after I rooted, I deleted a few unwanted, stock apps. After I did this, I started to get a lot of force close messages. Certain apps won't even open. So I tried to unzip a new kernel and I wiped all my data from the hboot. Now it starts up, will go to locked home screen. I try to unlock it, it's the white htc screen then loads into the set up (i.e. keyboard usage, etc) and in the last step a force close message pops up then goes through the whole scenario again. Now I want to just put a whole new system on so I can have my evo back. HELP?
emiliah310 said:
I rooted my HTC EVO, then wanted a new kernel for better battery, wanted the new gingerbread ROM too but after I rooted, I deleted a few unwanted, stock apps. After I did this, I started to get a lot of force close messages. Certain apps won't even open. So I tried to unzip a new kernel and I wiped all my data from the hboot. Now it starts up, will go to locked home screen. I try to unlock it, it's the white htc screen then loads into the set up (i.e. keyboard usage, etc) and in the last step a force close message pops up then goes through the whole scenario again. Now I want to just put a whole new system on so I can have my evo back. HELP?
Click to expand...
Click to collapse
Download the rom, kernel, and Gapps (http://www.goo-inside.me/gapps/latest/7/) on your computer. Boot into recovery. I don't use Clockwork, and I'm assuming you rooted with Unrevoked, so that's probably the recovery you have, but try to find the option to mount your SD card via USB, and move the files to your SD card. Do not unzip them. They must be .zip files. Unmount your SD card, wipe your data, wipe your cache, wipe your Dalvik cache, repeat all the wipes at least one more time, then flash the .zips in this order: 1. ROM 2. Gapps 3. kernel. Then reboot, and you should have a working system.
If you use ROM Manager and created a backup then you could flash (install) the OTA ROM Sprint sent out a few months back. This OTA ROM will be for the Rooted evo, so you won't lose root. Go to youtube.com and search this, "How to install new Sprint Htc Evo OTA 3.29.651.5 and keep root." In his comments he'll provide the link to that zip file and you can flash it from the recovery mode. Make sure you wipe the dalvik/cache and then flash zip file from sd card. It will appear to look like your initial problem but it will get passed the white htc screen. You could turn it off and turn it on again if HTC screen stays longer than 10 min. Once the ROM kicks in, you'll notice its stripped of all your cusomizations. If you used rom manager to back up your ROM then redownload ROM manager from market and the superuser app that came with the OTA zip file will allow ROM manager to run. At that point select manager and restore backups from ROM manager and select your backup and it should put you back to where you were prior to the problem.
Sorry so long, but I'm very detailed and don't want to assume you know what I'm talking about.
P.S. similar situation happened to me yesterday I fixed my issue like described above.
Another Thing haha, don't delete your stock apps just freeze them using Titanium backup. Freezing does the same thing for battery life. You wont see them in app drawer and they wont run in background.

[Q] VooDoo LagFix Applied?

Hi Everyone,
I just installed FireFly's ROM and unlike when I flash Serendipity 5.12 it didn't ask me to apply the LagFix upon reboot. I am believing this was probably because I didn't root my phone before I flashed FireFly? Regardless, I booted into Clockwork Manager Recovery, went into the SpeedMod advanced options, and applied it through there.
I selected the option apply and restore factory data and at that point it did its thing and rebooted successfully. I went back into FireFly's ROM and noticed a lot of the apps were missing (EX: SGS Tools, etc...) but SuperUser was still there. So I went back into Clockwork Manager Recovery and re-installed the FireFly ROM from its .zip file.
When it rebooted successfully I check to make sure all those apps were there, and they were. I rebooted into Clockwork Manager Recovery and check to make sure the LagFix was still applied and it was (i.e. data_fs=ext4). However, I could during all of this never find the VooDoo folder using a file manager. As apparently, if I wanted too, I could disable the VooDoo LagFix by creating a folder in there. My question is:
Does applying the VooDoo LagFix through the SpeedMod advanced options in Clockwork Manager Recovery not create a VooDoo folder on the SDCARD?
NightTickler said:
Hi Everyone,
I just installed FireFly's ROM and unlike when I flash Serendipity 5.12 it didn't ask me to apply the LagFix upon reboot. I am believing this was probably because I didn't root my phone before I flashed FireFly? Regardless, I booted into Clockwork Manager Recovery, went into the SpeedMod advanced options, and applied it through there.
I selected the option apply and restore factory data and at that point it did its thing and rebooted successfully. I went back into FireFly's ROM and noticed a lot of the apps were missing (EX: SGS Tools, etc...) but SuperUser was still there. So I went back into Clockwork Manager Recovery and re-installed the FireFly ROM from its .zip file.
When it rebooted successfully I check to make sure all those apps were there, and they were. I rebooted into Clockwork Manager Recovery and check to make sure the LagFix was still applied and it was (i.e. data_fs=ext4). However, I could during all of this never find the VooDoo folder using a file manager. As apparently, if I wanted too, I could disable the VooDoo LagFix by creating a folder in there. My question is:
Does applying the VooDoo LagFix through the SpeedMod advanced options in Clockwork Manager Recovery not create a VooDoo folder on the SDCARD?
Click to expand...
Click to collapse
It may not create the folder, try getting the voodoo control app fromt he market and checking to see if its showing as applied in there. If it says it is, I wouldnt honestly worry about the voodoo folder ( that is normally empty other than log files to begin with).
People, there are ROM-specific stickies in the Q&A subforum where stuff like this is supposed to go. Please use them.
Speedmod Kernel does NOT use Voodoo for lagfix. So you will never find the Voodoo file.
If clockwork says lagfix is enabled, then it is.

I have screwed up

Epic 4G
Rooted my phone last night, everything went well. All I was going to do was make my phone compatible with netflix, so I edited my build.prop to do that. All that process did was make my Swype keyboard stop working.
The first time, I used ES File Manager to copy build.prop out of the system folder, pasted to SD card, edited it, cut it from SD card and I put it back in system, overwriting the build.prop that was in there. No problems. When I attempted to do that again, I got the error "build.prop cannot be moved!" I did the exact same process, only now it wasn't letting me do it.
So I was googling ways to restore build.prop, and someone said to flash a different rom. I attempted to flash Syndicate ROM. I followed all the instructions just as there were at Samsung Epic Hacks.com, and now my phone is frozen at the first screen that happens on boot "Samsung/ww w.samsungmobile.com"
I also attempted to reflash the Froyo update from Sprint, that had no results.
So you flashed a different ROM to the one you already were using without wiping?
If so then it's no wonder your device is now stuck in a boot loop. I would say go into recovery do a full wipe and reflash.
For future reference get Root Explorer and when you use that to modify build.prop it will automatically create a backup. No need to paste it onto SD etc...
Just remember to mount System R/W within the program.
Good Luck!

[REQUEST] Platypus Egg Kernel flashable

I posted this in the general section, but no one has answered it. Please release the platypus egg kernel as a .zip file or post a link to where I can download the kg2 odin file so that I can flash the bali port. I want voodoo and refuse to flash an entire rom just to get voodoo.
check the heimdall thread i have it posted there last 2 pages
heimdall isnt working on my computer unless you posted an odin file in that thread its not going to help me.
Unless you are in love with the Samsung launcher vs. GOv2's Launcher Pro (or my preferance: download ADW.Launcher), there is no reason not to upgrade to GOv2 and get all the other tweaks in addition to the Kernal.
I know you say you've had trouble in the past, but just try it like this:
1) Boot in to CWM with the GOv2 zip on the sdcard.
2) Check your mounts
3) Run a backup
4) Check your mounts
5) Wipe data, wipe cash, wipe dalvik-cache
6) Check your mounts
7) Flash GOv2
8) Check your mounts
9) Advanced-Restore data partition only
10) Check your mounts
11) Reboot
Best case, everything works great and you just upgraded the Kernal as well as many other good things / tweaks, while still keeping all your apps and all your config.
Worst case, just boot in to CWM and restore what you currently have. You only waste about 15min of your life in trying, and I don't see how GOv2 could have any drawbacks over stock+bali (other then the alternate Launcher and themed icons/widgets - I installed AWD, unthemed all my icons, and I love the transparent-black widgets).
You should NEVER need to Odin unless you can't get in to CWM (which should never happen).
NOTE: When I say check your mounts, each partition on that CWM page should read "unmount" (meaning they are currently mounted). Check your mounts before/after each step, including before the final reboot.
I know how to check mounts. I want to keep touchwiz because of the themes. I really like the stock themes, and none of the launchers from the market have the option to view the app drawer as a list. if they did, i would consider using one of them. the stock themes are not really what is important. viewing the app drawer as a list is. my process thus far has been as follows: odin to kd1, kies to kj2, root, backup, flash rom, then restore system only from the backup. it hasnt been stable enough so far, but right now i am considering trying it a little different. i am going to get back to stock kj2, then delete all bloatware and all google apps from the system, then backup, then flash, then restore system from the backup, then reinstall any apps i want from the market. I also have the .apk file for play store, so i am also going to delete market and market updater before backing up. then after restoring system, i am just going to install google play store from my sd card. if anyone has any thoughts, please respond soon. i already odined back to kd1, getting ready to do kies to kj2. that takes a few minutes as i have to unplug the phone from the pc and reinstall the drivers through kies.
But I would prefer to just flash the kernel. I dont see any reason why they wouldnt release it.
well, after a very lengthy and complicated process, i finally have the platypus kernel on kj2. here is what i did. i started kies mini but didnt plug my phone in yet. i just went to menu and install driver. then i odined. after reboot, unplug the phone, back to kies, install drivers again. plug phone in and update firmware through kies. after reboot, unplug and install driver again. turn on usb debugging and root through super one click. reboot. install drivers again. then go through the system and delete all google and tmobile apps. get cwm running and take a backup. connect mass storage and copy b2tb to sd card. flash according to instructions. reboot. let the phone sit while i walk my dog. come back, boot into recovery, select advanced restore, system only. fix permissions, wipe dalvik, reboot. reinstall desired apps through market website. that was all last night. today i supercharged. so far so good.
well, its been almost 24 hours since i finished everything up. stable so far. no random reboots, no force closes, no screen lag or freeze, no crashes. i kept my backup from before the flash, just in case. gonna give it another day or two to make sure everything really is stable, then take a backup of the current setup. once i do that, im leaving this phone the hell alone lol.
To clear the record, I never had trouble flashing roms except for once and it was because i flashed cwm through rom manager before i knew not to do that. my most recent trouble started when i attempted to move dalvik to my ext2 partition. something went wrong when i attempted to move dalvik, and it got deleted. i had a backup and tried to restore, but got an md5sum mismatch. i did a factory reset through voodoo and it screwed up my apn settings. i restored default settings, but it didnt work. so basically after much trial and error, i have a stable advice again.
Do you still want this as a flashable zip???
Sent from my SPH-D710 using xda premium
ReActiveDisorder said:
Do you still want this as a flashable zip???
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I would like this as a flashable .zip, cant find it anywhere.
so if i flash GoV2 , ill get kj2 and all the other goodies? cause i am having a hard time finding stuff on here. and honestly once i get gov2 on my soon to be sidekick. thats all im doing to it since its dead here. i hear its the best
I'm on Generic Ginger 3.8 with the platypus egg V1 kernel, blaze 4g radio. Kicks ass! Battery life is amazing... I just wanted to flash the kernel on some other roms..
Sent from my SGH-T839 using xda premium
HateMeILoveIt said:
I'm on Generic Ginger 3.8 with the platypus egg V1 kernel, blaze 4g radio. Kicks ass! Battery life is amazing... I just wanted to flash the kernel on some other roms..
Sent from my SGH-T839 using xda premium
Click to expand...
Click to collapse
i don't have a flashable zip unfortunately, but what i've been doing is flashing the zimage thru Odin. if that helps you at all, if you're comfortable with Odin, i've been meaning to upload the tar file for the kernel that i made to this thread:
http://forum.xda-developers.com/showthread.php?t=1538576
WolfV2 said he would add it to the OP once i uploaded it. other than that, ReActiveDisorder had made a flashable zip, but i see that all his links have been removed.
edit: there's also nxd's tutorial on flashing a kernel with Hemidall here:
http://forum.xda-developers.com/showthread.php?t=1665150
yogi2010 said:
i don't have a flashable zip unfortunately, but what i've been doing is flashing the zimage thru Odin. if that helps you at all, if you're comfortable with Odin, i've been meaning to upload the tar file for the kernel that i made to this thread:
http://forum.xda-developers.com/showthread.php?t=1538576
WolfV2 said he would add it to the OP once i uploaded it. other than that, ReActiveDisorder had made a flashable zip, but i see that all his links have been removed.
edit: there's also nxd's tutorial on flashing a kernel with Hemidall here:
http://forum.xda-developers.com/showthread.php?t=1665150
Click to expand...
Click to collapse
Thanks a alot, man. Appreciate it.
Sent from my SGH-T839 using xda premium
HateMeILoveIt said:
Thanks a alot, man. Appreciate it.
Sent from my SGH-T839 using xda premium
Click to expand...
Click to collapse
Wait hold up, what am I thinking... had a little brain freeze there!. You could just use nxd's build of the Bali Kernel for KJ2:
http://forum.xda-developers.com/showthread.php?t=1663622
That also has the keystroke logger removed, AND a patch to improve keyboard responsiveness and efficiency!
yogi2010 said:
Wait hold up, what am I thinking... had a little brain freeze there!. You could just use nxd's build of the Bali Kernel for KJ2:
http://forum.xda-developers.com/showthread.php?t=1663622
That also has the keystroke logger removed, AND a patch to improve keyboard responsiveness and efficiency!
Click to expand...
Click to collapse
Sweetness! Thanks again.
Sent from my SGH-T839 using xda premium
HateMeILoveIt said:
Sweetness! Thanks again.
Sent from my SGH-T839 using xda premium
Click to expand...
Click to collapse
no problem, enjoy. if you haven't already, read the thread to see how to play with the timer and column delay settings for the keyboard!
Moved thread to general where it should be

[ROM] Barebone SGS4G KJ6 1.1.3

Barebone SGS4G KJ6 ROM
Use at your own risk, I take no responsibility for anything that may happen to your phone because of this ROM.
Here is a ROM that I made for myself, but what the heck, let's share. This ROM is very stock-like with just few usability mods.
Features
Will not wipe your programs or data, /data is preserved upon install
Heavily debloated. Most essentials apps are still there (like WiFi Calling)
No extra programs added, you need to add your own
ODEXed to save space in /data
CarrierIQ is completely removed
Extended Power Menu (including Screenshot)
Extended Quick Panel (10 buttons, including Data toggle)
1% battery (horizontal)
CRT-Off
Time zone version 2012b
/etc/hosts to cut ads out of the box (keep up to date with AdAway or similar)
Few conservative presets in build.prop and init.d
Basic with a Twist 1.1.3 kernel included
Notes
* Don't get confused about ODEXing, it's actually better to run and saves quite a bit of space in /data.
* Some Google apps (Maps, Streets, Voice) and Adobe Flash are removed from /system. Install them from market. Benefit - they can be moved to SD card this way.
* Original Swype is removed, is somebody needs it flash this.
* In case you need it, use this thread to add some bloat back.
* Factory Reset is removed from Settings->Privacy, use CWM if you ever need to reset all data.
* KJ6 modem included. Use this thread to flash a different modem if needed.
Install
Flash with CWM. Wait until the system boots up, then wait few more minutes for it to settle.
Download
v1.1.3
v1.1.2
v1.1.1
v1.1.0
v1.0.8
Changelog
1.1.3
Removed "Mobile data connection disabled. Connect?" popup on boot
1.1.2
Removed Factory Reset from Settings->Privacy
Updated kernel
1.1.1
Fixed voicemail notifications not working without Visual Voice Mail installed
1.1.0
CIQ is properly removed
Some neutral cosmetics (logo, animations)
Minor update to the kernel
1.0.8
Fixed slow stock browser scrolling
1.0.7
Extended Quick Panel
1.0.6
Added Screenshot to power menu
1.0.5
Removed DriveSmart and Software Update from Settings menu
1.0.4
Put original framework-res.apk certificate back
1.0.3
Added power menu mod
1.0.2
Original public release​
does it have a screenshot option from the power menu??
m0bstr said:
does it have a screenshot option from the power menu??
Click to expand...
Click to collapse
Nope, never bothered with power menu. I don't reboot the phone too often and to say the truth don't even remember when last time I needed to take a screenshot. I use ShootMe and QuickBoot when I need to, they both do the job just fine.
Yes, power menu is fully modded now, including Screenshot option.
Thank you for this, Anton! Love your kernel. Is this ROM ok for OC/UVing with you OC/UV kernel? I think this will be the second ROM I have ever installed. Haven't bothered to try anything since first getting Val Final.
Download link is not working
Sent from my SGH-T959V using XDA
Does this come pre-rooted?
Blaggah said:
Does this come pre-rooted?
Click to expand...
Click to collapse
Yeppers it does.
I updated the link. I actually took it down on purpose, wanted to look at something but never had time.
I was troubleshooting an error message during boot time, so I traced it to the CIQ trying to execute some on-boot code, which was removed by Krylon. Strangely the original code itself doesn't do much, it's initilizing a broadcast receiver with an empty onReceive method. Removing this was a moot point, it probably didn't do much. I disabled the BOOT_COMPLETED permission for the service to avoid the error message.
So I looked at the CIQ more closely. What I found is a little peculiar. The main CIQ code is integrated quite deeply into the framework, it cannot be removed easily, there are just too many calls that send various metrics to the CIQ Agent. The main CIQ classes are not in the framework.jar, they are in ext.jar. Probably that's why nobody noticed them and never tried to modify them. What is strange that many calls seem to be not implemented. For example the sumbitMetric is an empty method, shouldSubmitMetric always returns zero, etc.
It's possible that T-Mobile decided not to use CIQ on our phone (at least extensively), but instead of removing it completely just plugged few calls.
I'm removing the "CIQ removed" description because it's actually not removed, although may not be doing much.
I cannot get it to boot. After the "Galaxy S 4G" screen, the screen goes back then nothing ever happens. I rebooted into CWM (which still shows Team Acid's logo) and tried fixing permissions to no avail.
Given that the OP says it won't wipe programs, data, etc, was it possibly a Bad Idea™ to have wiped everything before installing this ROM?
Update:
Indeed, installing from a blank phone (literally, I wiped everything) didn't work for me. I flashed Bryan's one-click with CWM, it booted, rebooted into recovery, flashed this, and it booted. Now for testing. Thanks, Anton!
I had the same issue as well... Thought it was just my phone
Sent from my SGH-T959V using xda premium
Would be interesting to look at the logcat to see where it's stuck.
There was a possible problem with 1.0.3 that I pulled off. The current one that I re-uploaded - I tried to install in on both fresh phone (after factory reset) and on top of a running ROM , everything seemed fine.
The problem was with framework-res.apk. I had to resign in because I changed some permissions in AndroidManifest.xml (related to CIQ), but something went wrong the first time.
There is a little bit of controversy with signing of framework-res.apk. Some say it's OK, some say the original cert should be kept. Maybe somebody else would chime in and tell me if I screwed it up or not.
wont flash
I wipe everything, the ROM installs, and then black screen...noting. Let it sit for 20min however this did not resolve issue. I was able to install Valhalla no prob. flashed your rom on top of Valhalla and then my phone boots your rom. Do i need to install on top of another rom? I should just be able to whipe my phone and install your rom correct?
AntonX said:
Would be interesting to look at the logcat to see where it's stuck.
Click to expand...
Click to collapse
I can probably capture that because I can use adb to get into the OS. I ran top to see what, if anything, was hogging CPU but there was nothing obvious & CPU usage was minimal. I have the phone running now but I'm willing to wipe it again and re-flash. Mind you, I did more than factory reset. I was quite literally trying to start from scratch, so here's what I did (if this helps at all):
Backed up /efs to my PC
Backed up the SD card to my PC
Wiped cache
Wiped Davlik cache
Wiped battery stats
Performed a nandroid backup
Copied the backup from /sdcard/clockworkmod/backup to my PC
Formatted /data, /system, & /sdcard
Rebooted back into recovery
Copied the ROM to the SD card
Flashed it
Let it cook for ~20 minutes
So it was quite literally a blank slate.
AntonX said:
There was a possible problem with 1.0.3 that I pulled off. The current one that I re-uploaded - I tried to install in on both fresh phone (after factory reset) and on top of a running ROM , everything seemed fine.
The problem was with framework-res.apk. I had to resign in because I changed some permissions in AndroidManifest.xml (related to CIQ), but something went wrong the first time.
There is a little bit of controversy with signing of framework-res.apk. Some say it's OK, some say the original cert should be kept. Maybe somebody else would chime in and tell me if I screwed it up or not.
Click to expand...
Click to collapse
I appreciate all of your hard work. When I get the chance I'll download the latest, follow my steps above, & let you know what I find.
stephen_w said:
I appreciate all of your hard work. When I get the chance I'll download the latest, follow my steps above, & let you know what I find.
Click to expand...
Click to collapse
Wow, you really wiped everything from your phone
I'd appreciate if you send me the log. All you need to do is to save the file with "adb logcat -d >MyLogFile.log" after couple of minutes of this black screen. On an factory reset phone ODEXed ROM should boot very fast the first time because it doesn't have to build Dalvik.
I just tried downloading from my own link and reinstalling, everything seems OK. I also tried installing after full phone reset yesterday, it went fine too. I don't want to reset and restore everything anymore, too lazy
If it proves to be the certificate in the framework-res.apk, I may need to put the original AndroidManifest.xml back.
Hey Anton,
You can snag the logcat from here. In case anyone wants them & to clarify what I did, here are the steps I followed (similar to above but more detailed):
- Boot into CWM
adb reboot recovery​- Disable voodoo lagfix
- voodoo lagfix​- disable lagfix​- /system lagfix off​- Reboot
- Create a backup directory structure on your PC (mine is in C:\Users\username\Downloads\SGS4G)
mkdir backups​cd backups​mkdir efs nandroid sdcard​- Backup /efs to your PC
cd efs​adb pull /efs/​- Backup /sdcard to your PC
cd ..\sdcard​adb pull /sdcard/​- Boot into CWM
adb reboot recovery​- Wipe cache
- wipe cache partition​- Wipe Dalvik cache
- advanced​- Wipe Dalvik Cache​- Wipe battery stats
- Wipe Battery Stats​- Create a nandroid backup
- +++++Go Back+++++​- backup and restore​- backup​- Copy the backup to your PC
cd ..\nandroid​adb pull /sdcard/clockworkmod/backup/​- Format /data
- mounts and storage​- format /data​- Format /sdcard
- format /sdcard​- Format /system
- format /system​- Reboot into CWM (necessary for CWM to see the sdcard contents)
- +++++Go Back+++++​- advanced​- Reboot Recovery​- Copy the ROM to the sdcard (this is from the directory in which the ROM is located on your PC)
adb push ROM-sms-T959V-GB2.3.6-antsvx.1.0.3.zip /sdcard/​- Flash the ROM
- install zip from sdcard​- choose zip from sdcard​- ROM-sms-T959V-GB2.3.6-antsvx.1.0.3.zip​- Reboot & let it sit for ~10 minutes
Sorry for the lengthy post, but I wanted to ensure there was transparency in what I did.
stephen_w,
Seems that it's not framework-res.apk issue, it's not complaining about any certificates.
A lot of unknown permissions in the log, but it's OK, we've removed some of the system packages that grant those permissions but they do more harm than good in the end.
The crash has something to do with that: *** FATAL EXCEPTION IN SYSTEM PROCESS: PowerManagerService. Hm......
Question. If after loading the ROM you shut down completely (power off) first and then boot instead of rebooting right from CWM, will it still do the same?
Btw you don't have to clean everything that extensively. Just do factory reset to erase /data and flash. Dalvik and /cache are cleared but the installer, the /system is completely overwritten anyway.
Weird...it flashed fine for me with no wipe....
I did move on and never gave it a break in....but it did work
Sent from my SGH-T959V using xda premium
AntonX said:
stephen_w,
Question. If after loading the ROM you shut down completely (power off) first and then boot instead of rebooting right from CWM, will it still do the same?
Btw you don't have to clean everything that extensively. Just do factory reset to erase /data and flash. Dalvik and /cache are cleared but the installer, the /system is completely overwritten anyway.
Click to expand...
Click to collapse
I usually don't do it that extensively at all. I was writing a process for myself in case I wanted to really clean it out So this gave me a good excuse to test it. I was having some weirdness which prompted me to write the instructions for myself.
I haven't tried shutting it down after the install. I can certainly try that for you, if you like.
So its something to do with power management. That's weird. Is there something we did to our phones before that is causing the issue now?
Sent from my SGH-T959V using xda premium
Lawful123 said:
So its something to do with power management. That's weird. Is there something we did to our phones before that is causing the issue now?
Click to expand...
Click to collapse
Doubtful. Nothing I can think of, off-hand. I have to wait until later this afternoon/evening to reflash it and try powering off vs. rebooting from recovery. If you have the chance, please feel free and let us know what happens.

Categories

Resources