Hi every one,
My transformer was working fine... then came ICS, I was prey of the savage need to update, Made a backup with CWM and download the new rom.
What i did first was wipe cache and data, so far so good, flashed the ICS revolver beta, but in some point I screw it up and it just didnt boot anymore, just keep rebooting to CWM, couldnt turn off it keept rebooting, so I tryed flashing the new rom and... nothing it kept rebooting to CWM so I flashed back to revolver 3.1.* In booted OK, was runing fine till It crashed and restarted and couldnt get to CWM any more, Used NVFLASH trying to reinstall it but the screen stays off Windows detects it as a APX device but NVFLAS doesnt work since its a B70... it shows some letters in the screen but does nothing.
Please help me. Is there other way to install CWM maybe get acces to the files in the internal memory trough ADM or APX??
I would really apreciate any help, Im desperate!!!
Best regards,
IaxBay
Sounds like your recovery is missing. Can you still boot into revolver? If so reflash CWM recovery from within revolver.
Dead transformer?
Yes you are right, I think I messed up the CWM but cannot get into android at all.
Actually the tablet doesnt start, If I press the power button, or power+vol up or power+vol down... nothing works, but when I plug the usb windows recognice it and make the sound of device found, Actually It apears in device manager. I can get into APX, wich gives me hope... theres maybe a way to acces trough APX to install recovery or something...
If APX work and you have SBK v1, Tran Rouge has am nvflash version of their recovery
Yesss its alive!!!
Thanks so much to the creators of nvflash for saving my transformer.
it Actually my transformer happens to be a B70 I still it has to be SBK1.
Just follow thevinstructions of a video I found somewhere Ill post the link later cause i cannot seem to find it , anyway its working and im writing my horrible english in my revived tf101. Lesson lerned: READ A LOT about what your are going to do before you do it.
Thanks again XDA
Related
I have a sl101. I only get eeepad screen. My son did something to the machine. I can get it to say booting recovery but nothing happens. I also can get a text that says cold booting Linux. Again nothing happens. Nvflash says USB write fail. But when I check adb the device is recognized. Is there a way for me to adb push a recovery in there for me to boot too, so I can reflash a rom. I have a little dilema here. I also was wondering if I can flash rom thru adb. I read once that's how they used to do it on g1. I don't know if I am speaking accurately though. Any kind of light shed on me will be greatly appriciated
Sent from my SAMSUNG-SGH-I997 using xda premium
not sure about the slider but i had a customer return yesterday with this exact issue on the tf101 and i couldnt get out of it. the tf just kept switching itself back on and getting stuck on the splash screen.
found this set of instructions but im not sure if its what you need or if it will work:
http://androidroot.mobi/technical/asus-eee-pad-transformer-tf101-root-cwm-recovery/
good luck
That is exactly what is going on with mine. The slider is basicly the same thing. I plug it in and I tries to boot. I thought you had to be booted into recovery or the rom for adb to work? That's why I believe this method you just revealed to me. Or some variation of it will work. I will be trying shortly.
Sent from my SAMSUNG-SGH-I997 using xda premium
not working transformer
i have asus tranfrormer 9.x.x.x, recovery 5.8.x.x, after i did superwipe , every thing is gone and i cant flash any rom through adb/nvflash saying cant write to sdcard (read only). any suggestions?
HELP : Same problem, no apx, recovery strange, no boot
I still have access to clockwork but nothing seems to install, i tried update clockwork nothing worked, reboot gives me clockwork, APX don't work...
please HELP !!!!
densleonis said:
I still have access to clockwork but nothing seems to install, i tried update clockwork nothing worked, reboot gives me clockwork, APX don't work...
please HELP !!!!
Click to expand...
Click to collapse
nvflash if your TF101 is compatible model.. (must B60 and below).
Or read Wolf's thread HERE. It might helped everyone here..
Thanks but everything needs adb connexion and as apx is not working, i can't connect ADB..
I have a B50 model
Nobody have a clue ?
well, I have to send it back to my reseller that will change it but before that I need to delete clockwork mode or brick it, how can i do ?
I tried every thread here, update rom does nothing, looks like it does not write anything on the tablet
Thanks in advance
try to follow this procedure...
http://forum.xda-developers.com/showpost.php?p=25636698&postcount=5
let me know
Hello, thanks, but as I can't get to apx mode, I can't use nvflash, so still stuck with my recovery, I tried to modify super Wipe package to do things but can't get through...
If someone can make a package to delete recovery, then I can try it on my tablet, I really yneed it to be bricked cause now it load with Rogue's recovery on and on, so the reseller will new it has been modified and I will have to pay to get it back ...
Thanks in advance
with the procedure posted in the previous link you don't need APX mode and don't need NVflash...
Just boot your TF in recovery mode and plug it to your pc...
remove all previous drivers and install the new one that you can find in the post
ciao
ps... at the end of the procedure you will have your TF101 with stock rom and stock recovery
I will try but even when I am on recovery, nothing appears in Hardware management, no recognition from My computer, still strange... And when I power + vol down key, It never says to presse vol up in the text in the upper left corner, just says booting linux kernel...
When I try to boot pressing vol up + power, nothing happens, not even the clics that can be heard when it powers up...
I had a similar issue when I used SuperWipe and discovered my ROM on the external SD Card could not be accessed by CWM
I tried pushing the file with adb but kept receiving errors - protocol, etc. I suspected it was a driver issue along with the fact that 64 bit systems don't always play nicely with drivers. I actually dug up an old hard drive and did a very basic install of 32bit Win7. I booted the Transformer into CWM and when I connected it to my PC - I pointed it to the universal naked driver. I was then able to successfully push the rom to internal storage and used CWM to flash it
Hello,
I tried to connect my tablet to an old Windows 2000, but still nothing happens
Hello every one, I finally sendt back my transformer to my reseller, now I can buy a new one...
Thanks again
Ok, I swear I have read 100 pages of similar problems, but it looks like everyone else is able to get into apx mode at least to run nvflash or easy flasher.
1. Turn on xformer with power button - stuck at Asus Eee Pad screen
2. Try to boot into recovery with vol - + power;
- volume up to enter recovery, ded android with an exclamation
- volume down to choose between 'wipe' and 'cold boot' both result in getting stuck at Asus screen
3. Plug in xformer, hold power and vol +; nothing. Never shows up in device manager and it doesn't beep or anything like the ones in all the videos do.
I really just want to get up and running at the very least, as I handle all of my businesses billing through my xformer, but my ultimate goal is to get on the HD-ROM.
I have downloaded the newest firmware from asus, have all the drivers installed (I think), have tried booting into recovery with one, some or all of the new software on the sdcard.
Any more ideas I can try? Do you just have to hold your mouth right to get it into apx mode? I have held those buttons so much I think I'm getting Nintendo thumb!!!
Thanks all!
nobody?
Throw something at me! What update.zip file do I put on the sd card? I have tried putting the newest asus update.zip on there with both its original name and the update.zip name. still comes up with a dead android and an exclamation point.
Download a firmware from Asus, rename it to EP101_SDUPDATE.zip
Put it on the root of your sd card and boot into recovery, hopefully it will flash it and let you boot up.
As for NVFlash, make sure you install teh APX driver.
Still won't get past about a second or two of trying to boot with EP101_SDUPDATE.zip on the sd card. Think I'm stuck, or is there something else I need to try?
Thanks!!
..Do the apx process and try using brks tool......just dont flash touch recovery! I couldnt get the drivers to show but still managed to nvflash recovery using the tool. Its install solarnz external sd recovery so you can put a rom zip onto micro sd.
My issue was after doing this normal on off reboot kept booting to recovery and i had to cold boot into the rom.
I tried the wheelie beta and it has ended up wiping the tf completely.....so dont do that lol. Its still a soft brick as i could still nvflash recovery but decided that aslongs its wiped of root etc id just send it to asus.
If brks tool flashes for you then id try nvflashing prime and see if that works.......i think it will but i ran out of time and patience this morning to do it......at your own risk of course.
scottyf79 said:
..Do the apx process and try using brks tool......just dont flash touch recovery! I couldnt get the drivers to show but still managed to nvflash recovery using the tool. Its install solarnz external sd recovery so you can put a rom zip onto micro sd.
My issue was after doing this normal on off reboot kept booting to recovery and i had to cold boot into the rom.
I tried the wheelie beta and it has ended up wiping the tf completely.....so dont do that lol. Its still a soft brick as i could still nvflash recovery but decided that aslongs its wiped of root etc id just send it to asus.
If brks tool flashes for you then id try nvflashing prime and see if that works.......i think it will but i ran out of time and patience this morning to do it......at your own risk of course.
Click to expand...
Click to collapse
i am the same issue by flashed the touch CWM and window wont able to reconigzed my TF as a APX device
i tried many drivers it still not able to work.
how can i get back to normal CWM? i dont have havy roms or update.zip in internal roms.. and Touch CWM wont able to recongized Removerable sdcard
god~~
The root and backup option should flash you an external recovery.
While tablet reboots hold down volume up and power until reboot stops.
Then try brks tool again and select root and backup.......during the process it may ask if you want to back up but its not worth while as i dont think theres anything to backup. You should end up with ext micro sd recovery.
As i said id look for the prime rom thread and download the nv flash version and see if it works first.
If asus restore the wiped TF without question and everything goes ok il let you know as it may be worth wiping it with wheelie nv recovery and just RMA.
I just simply CAN'T get it into apx mode. I've installed, uninstalled and reinstalled the drivers. Trying to flash ep101_sdupdate.zip still just results in an error. crap.
Hold Volume-UP BEFORE holding power, then hold power for 5 secs (Still holding vol-up( doing this all while connected. It should show in device manager.
Couldnt get Tf to show in device manager either no matter what.
I know it may not seem as though its in apx but if it has stopped rebooting when you do v up and power then it seems it is......
Seems to be an issue thats starting to become more common and very difficult to fix properly.
PC will just not recognise the TF.
Hmm - sorry i couldnt help more but id still try nv flashing Prime and if you can get to a blank screen using volume up and power without the TF rebooting theres a chance its in apx.
Best of luck dude.......
scottyf79 said:
Couldnt get Tf to show in device manager either no matter what.
I know it may not seem as though its in apx but if it has stopped rebooting when you do v up and power then it seems it is......
Seems to be an issue thats starting to become more common and very difficult to fix properly.
PC will just not recognise the TF.
Hmm - sorry i couldnt help more but id still try nv flashing Prime and if you can get to a blank screen using volume up and power without the TF rebooting theres a chance its in apx.
Best of luck dude.......
Click to expand...
Click to collapse
same case for me~~~just cant install the driver
You all can try running Puppy or DSL (damn small linux) in a virtual box on your windows pc. Comes with drivers included and only is a 200/60 Mb download.
Got so frustrated with it I just went and bought a tf-300
c3poman said:
Got so frustrated with it I just went and bought a tf-300
Click to expand...
Click to collapse
no better way to fix it than that
nice one
Yea, I like it pretty good so far. Volume is WAY louder on the 300, even though there is only one speaker. The screen also gets darker, which is nice if you watch tv or browse the interwebs in the bed. Also, wifi reception is great. Haven't tried gps yet, but I'm sure it is improved.
It did get really laggy, but I did a factory reset and it seemed to clear out the cobwebs.
Thanks for y'all's help! I'm still going to try to unbrick that tf-101 and sell it or something. Hate to have a $400 paperweight...
People will buy bricked ones on Ebay for a reduced price, just clarify that it is in fact bricked.
UPDATE: Tried with TWRP (Thanks to Lethe6) and installed Ray's Unofficial CM10 with Kat Kernel and now i've got a working tab on my hands. wiped my internal memory though, but still good
Hi, sorry for the unclear title. i searched the forum but the only problems i found were either recovery bootloops or softbricks after updating.
my problem is, however, that my TF101 keeps showing the spalsh screen, making a click noise and then turning off and repeating the same thing over and over unless i enter my Rogue team's recovery (based on CWM 6) and use the power off option there. it doesnt even cold-boot. i didnt install anything new that would cause this problem.
Also, today i decided to install a new rom (i was using the stock ICS rooted). But i'm unsure if i have enough battery power for that.
i'll be online so if you need any more info just ask below.
Thanks in advance, Dan
ok so i used EasyFlasher to flash the latest Stock rom, and not only did it not fix my problem, but apparently it wiped my recovery so now i cant power off the tablet or enter APX mode to flash a new recovery.
its stuck in this constant loop of powering on displaying EEEPad splash, click noise, rinse and repeat over and over again i cant stop it
after 5mins of mashing the Vol_Up button i got into APX by chance and flashed RogueXM Recovery
i now have access to APX mode and recovery installer again but the problem persists and i cant boot my tab ever still....
Try TWRP recovery. I know it's a long shot but it solved many issues for many people. You can flash it from easyflasher.
flash?
DemonDan said:
after 5mins of mashing the Vol_Up button i got into APX by chance and flashed RogueXM Recovery
i now have access to APX mode and recovery installer again but the problem persists and i cant boot my tab ever still....
Click to expand...
Click to collapse
Can you flash anything? And do all ROMs stick?
I am only guessing.....
scott (tf101 with EOS4 )
@wn1ytw i can flash now, and i think the roms stick but since it doesnt boot i cant really tell
@Lethe6 i'll try TWRP and update the post
Also, Another question, Does the TF101 charge when connected to a wall adapter but turned off?
Alright, I hate being that guy. You know, the one who posts the same question as 50 other people because he is too lazy to search. But in my defense, I have spent the last three days pouring over thread after thread and still can't find the answer, so please be patient and gimme a break!
So, I'm stuck in CWM 5.8.3.4 loop after flashing Katkiss and not knowing I couldn't use the "boot to recovery" option. I've got no access to my micro SD card and my x64 Win 7 won't recognize the TF101 so I can't put my own recover zip on. Cold boot goes to the screen that lets me boot Android or Wipe. If I pick Android, it hangs (for hours). I've wiped everything and reinstalled Katkiss, Revolver, Revolution, but I have the same problems.
Is there a thread that starts from the BEGINNING of the fix and sees it through? I've found dozens of threads that say, "Just input (code), flash, and you're done!", but I guess I'm not that far along. I've bricked Dinc/Dinc2, Razrs, etc., but never had trouble fixing them like this TF101.
I've got ADB, JDK, Ubuntu, etc. since I've tried numerous times. Also, I've had no luck with the one-touch fixes. I know I'm missing something easy, I just can't figure it out.
Thank you.
Incidentally, I've tried ***http://www.transformerforums.com/fo...ry-bootloop-fix-tested-my-c10-windows.html*** , but the SDK files come in a zip, not exe and none of the files execute/install in such a way that will let me input commands. I know I'm missing something because a soft brick isn't that big of a deal.
Huh. I don't know what happened, but it involved me cleaning the screen, accidentally pushing buttons, and rebooting, and now it works. No clue, but as long as I never shut it off again, I'm set!
You're gonna need to get the PC to recognise it to fix it I'd say
Easiest way would be using Easyflasher to get TWRP recovery installed, it sounds like you have stock recovery installed at the minute
http://forum.xda-developers.com/showthread.php?t=1688012
Few people have needed new cables to get the PC to recognise the TF again, might just be needing the correct drivers though which are also linked on that page
Basically install the drivers, put the TF into APX mode,
(Vol Up & Power from powered off state while plugged into the PC)
Then run Easyflasher as admin and choose to flash TWRP (CWM is probably the reason for the bootloop, it doesn't play nice with JB ROMs)
Once you have TWRP installed, flash whichever ROM you want from new recovery and you should be good to go
I appreciate the suggestion, but that isn't doing it. I have the tab booted up and recognized by Windows, but when I try to update to a different CWM or TWRP, nothing happens. I can reboot into CWM 5.8.3.4 all day, but it won't say anything about any different recoveries I've tried to install, though the recoveries appear to be installing correctly according to the dialog given on the tablet.
I've also tried running NVflash, but nothing happens (apx drivers installed). The BAT file briefly says USB not recognized and closes.
Further, I've tried Easyflasher / one click root+recovery and I just get messages saying "ADB server out of date. Killing." The tab still reboots, but upon rebooting, it gets stuck in CWM 5.8.3.4 unless I force cold boot.
I guess the best way to describe this is to say that no matter what I do with the tab or different recoveries, I can't get rid of CWM 5.8.3.4 and no matter what I do, it default boots into CWM.
It default boots into CWM.... I think that is the key here
I remember something about that from a while ago, having to hold Power & Volume Down to boot normally, as if the OS and Recovery partitions were reversed
Unfortunately I can't remember the solution atm, but if you head over to transformerforums.com or give frederuco a PM from here or over there, Im pretty sure I remember him having a solution some time back
I shot him a message. Thanks for the suggestion.
I swear all I did was root, install Katkiss, and reboot into recovery. Is this a common problem to have THIS much trouble with such a simple process? I know now that booting into recovery can cause a loop, but this seems like way too much.
It's having CWM as your recovery when you flash a JB ROM that causes the problems
CWM & JB = Problems
TWRP is the recovery to use once you get out of this mess, good luck
Ok so its been along while since I have played with my rooted TF101. I use to be able to flash a new ROM no problem. Well I got rusty. The last ROM I had flashed every time I turned the tablet on it would go to recovery first. I had to reboot and manually choose to reboot my OS. Well I don't really use my tablet anymore so I was going to unroot it and sell it to a friend. Well I went in to the CWM recovery and started to try and flash my stock ROM. well it was on the SD card and not the tablet so it wasn't recognized and I made the mistake of formatting the whole tablet. System included.
So No I can only turn on the tablet and enter CWM. I downloaded easyflasher and tried to flash the stock ROM and unroot but it won't recognize the tablet. I can't get it in to APX mode. I have tried and the computer makes the connected sound but it doesn't read the device at all. I have tried everything to make sure it is in APX but the computer will never show that it is there. Just make the sound and that's it. So I'm stuck in a brick that I can't get out of.
How do I get out of it all?
Thank you.
lebutters said:
Ok so its been along while since I have played with my rooted TF101. I use to be able to flash a new ROM no problem. Well I got rusty. The last ROM I had flashed every time I turned the tablet on it would go to recovery first. I had to reboot and manually choose to reboot my OS. Well I don't really use my tablet anymore so I was going to unroot it and sell it to a friend. Well I went in to the CWM recovery and started to try and flash my stock ROM. well it was on the SD card and not the tablet so it wasn't recognized and I made the mistake of formatting the whole tablet. System included.
So No I can only turn on the tablet and enter CWM. I downloaded easyflasher and tried to flash the stock ROM and unroot but it won't recognize the tablet. I can't get it in to APX mode. I have tried and the computer makes the connected sound but it doesn't read the device at all. I have tried everything to make sure it is in APX but the computer will never show that it is there. Just make the sound and that's it. So I'm stuck in a brick that I can't get out of.
How do I get out of it all?
Thank you.
Click to expand...
Click to collapse
Try this:
http://www.transformerforums.com/forum/asus-transformer-tf101-development/31919-frederuco-s-guide-flash-tf101-back-stock.html
If I had access to the os I only have clockwork recovery. I can't get anywhere else
Sent from my SM-G900V using Tapatalk
I could really use some help guys. I try to turn on the transformer and it goes to recovery. I formatted the system so I can't even get to my ROM. I have nothing. I am trying to get in to APX but it won't let me. The computer makes the connection sound but when I try to use Easyflash It won't work. I'm stuck between a rock and a hard place. Please someone help me out.
lebutters said:
I could really use some help guys. I try to turn on the transformer and it goes to recovery. I formatted the system so I can't even get to my ROM. I have nothing. I am trying to get in to APX but it won't let me. The computer makes the connection sound but when I try to use Easyflash It won't work. I'm stuck between a rock and a hard place. Please someone help me out.
Click to expand...
Click to collapse
So you have already successfully installed the naked drivers on your computer? and when you have the tablet connected to the computer, are you able to enter APX mode (hold power button and volume up until screen goes black). What does the device manger show on the computer when the table is connected?