My problem is that the phone wont boot pass the Android flash screen. It does get past the first Vodafone screen.
My hardware is the 32B running Hboot = 1.33.0004 (SAPP10000)
what I have done so far is to be able to boot to RAv1.2.1G I have been able to back my phone up using android (and restore).
I thought using this procedures I would be able to able to add customs ROM by just renaming them to update.zip, they seem to load into the phone just get stuck on the above screen.
I haven't done anything with the SPL (Hboot) as to me it appeared booting to Rav1.2.1G does this for me.
I also have not flashed the Rav1.2.1G image to the phone, instead using the fastboot option each time I was to perform the rom update.
Any ideas way the phone wont get past the second screen?
make sure you have 'wiped' data, if you have the 3 partitions on your sd card, make sure you have formatted over the ext3/4 one.
Update the zip again, and pray lol
I have tried wiping the data after the upgrade and not the before, I'll give the before a go.
I only have one partition on the sdcard which was formated in windows 7
Cheers wiping data just before the update of the ROM fixed the issue.
pls connect the usb to pc and post the output of
Code:
adb shell logcat
cheers
EDIT: nevermind, you solved in the meantime
I have a desire S, Which is S-Off through revoltionary and rooted! But i don't have a nandroid backup and my phone will no longer boot up. what can i do? I've tried to do a factory reset in recovery mode but that doesnt work.
How can i flash a stock rom on it to get it back to normal, i think its bricked... can someone help me?
1st of all i suggest you download a custom rom from the development section here.
then flash that via recovery. then hopefully your phone will load up into the new rom.
after you confirm this to me i will help you further to get back to stock rom
Thanks for the reply.
I did what you said, i tried to install a custom rom in recovery but it ends up aborting after a while, i dont think i can get any rom to work now, its not looking good
Fingers crossed
See this thread
Attempt the commands that are shown within the first #1 of it and you should be able to determine whether or not you have a fried eMMC chip.
See links in my signature for adb & fastboot drivers and the thread you need to see.
What recovery are you using? and what rom are you trying to flash?
I suggest downloading this rom http://forum.xda-developers.com/showthread.php?t=1048203
Once you have done this follow these steps below to the letter
1. Boot into recovery
2. Format System (not wipe option but format option !!!)
3. Format Data
4. Format Cache
5. Wipe Data/Factory reset (1st option in wipe/format menu)
6. Wipe Dalvik Cache
7. Now install zip from sd card and flash the rom
8. Reboot
It was the Saga LBC mod that i was trying to install but it didn't work, nothing works that i try. i've formatted my sd card nom. basicly ive screwed everything up i've got no back ups of any rom and i cant get anything working
pumpernickel77 said:
It was the Aage LBC mod that i was trying to install but it didn't work, nothing works that i try. i've formatted my sd card nom. basicly ive screwed everything up i've got no back ups of any rom and i cant get anything working
Click to expand...
Click to collapse
can you give me a step by step explanation of what you are doing and what messages/error messages you are getting at each stage?
I will try to help you the best i can. But i need to try to understand what the main issue is 1st. Don't worry just yet!
pumpernickel77 said:
It was the Saga LBC mod that i was trying to install but it didn't work, nothing works that i try. i've formatted my sd card nom. basicly ive screwed everything up i've got no back ups of any rom and i cant get anything working
Click to expand...
Click to collapse
You need to give specifics and preferably screen pictures....(if possible) did you try the commands from the thread that I posted above, or what happens when you attempted the commands layed out by Eclipse_Driod above?
The more you tell us, the more we have to work with!?
I'm sorry but I dont know how to do the command thing, i'm a newbie when it comed to that I've basicly got a desire s that wont boot up and a SD card with nothing on, i think i need to somehow put a recovery image on my phone before i can install a rom
Is there any way i can install a recovery image to the sd card from the pc, that will then allow me to install a rom?
pumpernickel77 said:
I'm sorry but I dont know how to do the command thing, i'm a neebie when it comed to that I've basicly got a desire s that wont boot up and a SD card with nothing on, i think i need to somehow put a recovery image on my phone before i can install a rom
Click to expand...
Click to collapse
I believe that you already have a fully working recovery on your device, otherwise you wouldn't have been able to flash LBC ROM in the first place....so I suspect that the problem is else where....(possibly damaged eMMC chip) but unless you help us, by running the commands and testing this we are un-able to confirm this for you.
You can find the adb and fastboot commands as a link in my signature simply download and then put these on you PC and run the commands that were in the thread I posted earlier (thats also in my sig Fried eMMC?)
Although I also believe that if you're able to get to S-OFF then you're able to enter the commands from your PC that will enable you to flash a recovery onto your device.
See this post where I've previously instructed some one else how to do just this.
Any questions then just and try to take screen captures or cut 'n' pastes of all errors encountered.
Good luck
pumpernickel77 said:
I'm sorry but I dont know how to do the command thing, i'm a neebie when it comed to that I've basicly got a desire s that wont boot up and a SD card with nothing on, i think i need to somehow put a recovery image on my phone before i can install a rom
Click to expand...
Click to collapse
does it not even boot into recovery?
you need to hold down the volume down button and keep it held down while you power on the device. This will make it boot into recovery mode.
But before you can do that i would advise you take the sd card out of the phone, connect it to your computer with a card reader and copy over the lbc mod rom.zip file straight onto the card, then put it back into the phone.
then turn the phone off and boot into recover as mentioned above and select install rom from sd card and select the zip file you transferred over.
after it has installed reboot phone by selecting the "reboot" option in the recovery mode.
all should now be well.
report back how this goes
and don't forget to hit that thanks button
Thanks for your patience.. I'm going to try and explain in full what i've done
I got S-off on my Desire S using "Revoluntionary" (after watching how to do it on YouTube) and after domwloading ClockWorkMod from market place I sucessfully installed Saga LBC ver 5.3. Everything was fine i was very pleased. I had a back up of the old stock ROM saved on my SD card which i did through Clockworkmod too.
Then this morning I got a update message from clockworkmod saying ver6.0 was available to download so i did. My phone never turned back on again I could get into recovery mode but nothing would work (wipe data, factory reset, Even tryin to install the old backed up rom didn;t work) it just kept freezing.
So i took my sd card out and plugged it into the pc to try to look for anothr rom to try out, thats when i ended up formattig the SD card (god knows why) So now ive got no backup, no clockworkmod, no nothing on my SD card...Am I screwed??
Thanks for your patience.. I'm going to try and explain in full what i've done
I got S-off on my Desire S using "Revoluntionary" (after watching how to do it on YouTube) and after domwloading ClockWorkMod from market place I sucessfully installed Saga LBC ver 5.3. Everything was fine i was very pleased. I had a back up of the old stock ROM saved on my SD card which i did through Clockworkmod too.
Then this morning I got a update message from clockworkmod saying ver6.0 was available to download so i did. My phone never turned back on again I could get into recovery mode but nothing would work (wipe data, factory reset, Even tryin to install the old backed up rom didn;t work) it just kept freezing.
So i took my sd card out and plugged it into the pc to try to look for anothr rom to try out, thats when i ended up formattig the SD card (god knows why) So now ive got no backup, no clockworkmod, no nothing on my SD card...Am I screwed??
from what you have told me u still have clockwordmod recovery as it is on the phone itself. not the sd card. So you are ok there. What i need you to do next it to see if you are able to boot into recovery?
if you can then try again to format data, system and cache.
then try installing a rom from your sd card.
if it is still freezing while trying to perform a format then look back at bens previous posts about using adb through your pc to find out if your emmc chip is damaged
I can boot into recovery no probs there, but when i format data, system and cache it goes so far and then aborts
Ive just tried to install the LBC rom again i renames it PG88IMG ind it asked me to install so i did. It says 'update in progress' and the bar on the right starts to fill up but it stops near the top and eventually aborts
right, the only thing i can think of to try next is following the same method you said you followed to s-off through revolutionary.
it will say you are already s-off or something but click proceed anyway. and make sure from there that you type "y" when it asks if you want it to install clockworkmod recovery. as this will reinstall a fresh recovery image for you.
this is the only thing i can think of.
let me know how it goes
did you look at my post#11 above...
The second half of it contains instructions on how you can flash a new recovery image......from your PC.
Ive just tried to do the s-off again the way i did before but i can only go as far as the part when i connect my phone and open the revolutionary programme and it doesn't detect my phone
Ok, it looks like the last option to try is flashing a new recovery image manually.
For this you will need to download and install adb. which can be found here
http://www.addictivetips.com/mobile/what-is-adb-and-how-to-install-it-android/
along with instructions of how to set it up and use it.
after you have done this you will need to download this
http://download.clockworkmod.com/recoveries/recovery-clockwork-5.0.2.0-saga.img
which is the latest clockworkmod recovery for your phone. and rename it to recovery.img
then copy the recovery image to a convenient location on your computer, preferably with a short path. We will be placing it on the C Drive directly (not in any folder) and using that in the next steps.
Power your device off and reboot it in fastboot mode. (holding volume down whilst pressing power on button) then select "fastboot" from the list of options you get.
Connect your device to your computer via USB and wait till you see ‘fastboot USB’ on the screen.
Launch Command Prompt and type the following command:
fastboot flash recovery c:\recovery.img
Wait for the process to finish and reboot your device once it’s done.
Hey Guys,
I tried pretty much everything and don't know what else to do. My phone just stays stuck on the android screen. I forget that the "SD card" in this phone is actually part of internal storage, I did a factory reset and lost everything.
I tried flashing different boot.img and getting nothing. I'm afraid I need to get a rom onto the sd card but how is that possible if I cant get my phone to boot up.
Any ideas?
Thanks!
volume down button+power button try this combination until u get in the bootloader then select recovery. once in recovery just restore a backup if you have one, you should have one
i dont have a backup and i have nothing on my "sd" to i can install. I have formatted the ROM and thats why it wont boot..
If you can get into Recovery (CWM) in the advanced settings if i remember, there's a "format sd card" to make it work with the installation of a custom ROM
I posted a tutorial for how to do this:
http://forum.xda-developers.com/showthread.php?t=1667929
brwetz said:
I posted a tutorial for how to do this:
http://forum.xda-developers.com/showthread.php?t=1667929
Click to expand...
Click to collapse
thanks for the guide but im getting error mounting /sdcard. and if i follow cannondale0815 solution for that problem when flashing the stock and cwm I cannot access recovery mode.
Clear Storage in fastboot and re-install CWM then try it. That's how I got mine to work
Ok if your bootloader is locked and you have a custom recovery first flash stock recovery then boot into fastboot and run "fastboot oem lock" After that restart your phone and boot back into fastboot. Then run the RUU for your model and cid. easy.
Follow the steps which might work
1, If you knows something about adb, you can just simply push a rom into the sdcard(You don't need to do this if there is already a flashable rom in the sdcard), flash the kernel in fastboot, go to the recovery, wipe and flash a new rom. Then everything(except your data) should be fine
2, If you are not able to use adb push, or you have never flashed a recovery/3rd-party rom/ or you have other issues:
Using the RUU updater might be safe and simple (of course everything except those in the sdcard will lost)
a, relock the hboot using "fastboot oem lock"(or the RUU will refuse to continue)
b, run the RUU updater, wait for ~10min, your phone will be "refreshed" to something like the 1st day you bought it, except the Hboot will say it is "RELOCKED s-on"(this should be LOCKED s-on at first)
c，unlock your phone again(if you have stored the .bin file for unlock, just push it to your phone in the fastboot mode which is enough already, it is not needed to do the whole process in HTCDEV again.)
IMPORTANT: the RUU updater and the phone must be the same area. for example an Europe's RUU can't be applid to an US's One S
This is also the only method to update the Radio software, unless the hboot is S-OFFed
Bure03 said:
Hey Guys,
I tried pretty much everything and don't know what else to do. My phone just stays stuck on the android screen. I forget that the "SD card" in this phone is actually part of internal storage, I did a factory reset and lost everything.
I tried flashing different boot.img and getting nothing. I'm afraid I need to get a rom onto the sd card but how is that possible if I cant get my phone to boot up.
Any ideas?
Thanks!
Click to expand...
Click to collapse
okay well i had successfully added cwm recovery and i was gonna install new rom, i factory reset , deleted cACHE partition and dalvik cache, then when i was gonna install the rom it said aborted, and then accidently pressed reboot without restoring my backup now i can only get to bootloader and i cant enter recovery at all , when i try turning it on it only stays at htc quietly brilliant screen and reboots and does it again, i really need help guys !! please !! :crying::crying:
kidlye24 said:
okay well i had successfully added cwm recovery and i was gonna install new rom, i factory reset , deleted cACHE partition and dalvik cache, then when i was gonna install the rom it said aborted, and then accidently pressed reboot without restoring my backup now i can only get to bootloader and i cant enter recovery at all , when i try turning it on it only stays at htc quietly brilliant screen and reboots and does it again, i really need help guys !! please !! :crying::crying:
Click to expand...
Click to collapse
Before you fix your recovery you will need HTC Sync Software http://www.htc.com/www/help/htc-one-x/#download
And ADB installed from the SDK here http://developer.android.com/sdk/index.html
Once you load the SDK Manager download the Android SDK platform tools. Then download the proper recovery Image that has official support for the AT&T One X from here http://teamw.in/project/twrp2/99
Go to the folder you installed the SDK tools to If your on Windows 7 x64 and installed it using the default paths it will be located here C:\Program Files (x86)\Android\android-sdk\platform-tools when at that folder move the recovery image file in to that folder then hold shift and right click in the folder select open command window here.
Now get your phone back into the bootloader select fastboot and connect it to your pc when your phones bootloader says fastboot usb its connected and ready to fix.
type fastboot flash recovery openrecovery-twrp-2.1.8.1-evita.img
that will update your recovery to TWRP which is much better than CWM. From there you can select reboot into recovery from the bootloader TWRP will load up you can Wipe /system /cache then mount your phone to your PC and upload any ROM you want. I recommend AOKP or CleanROM and flash away.
People really need to start searching before they post this is somewhere around the 20th post I've seen like this in the last couple days. All want help unbricking and people have posted guides on how to unbrick. Also there are many posts about how CWM for the HOX is highly unstable.
I recently changed back my build.prop to the original one that i backed up before. Then my device cannot boot anymore. It is stuck in the ASUS splash screen when i boot the device.
Then I flash the latest CWM recovery. But the latest version CWM cannot do anything like factory reset or flash zip.
After that, i tried to use the "wipe data" in the bootloader, it doesn't work either (still stuck in the splash screen).
And then i tried cold boot linux and it also doesn't work. Up to this point, I cannot find anyway to fix it.
However, I found that adb is somewhat working in CWM recovery. I tried "adb push build.prop /system/build.prop" (the build.prop is extracted from the US_epaduser_10_26_1_7_UpdateLauncher.zip package from ASUS official site), it doesn't work either.
I put the US_epaduser_10_26_1_7_UpdateLauncher.zip package from asus support site in sd card and tried to flash it by CWM recovery, it doesn't work either.
AFTER ALL THESE PROCEDURE, i think the system is corrupted because of some possible dirty wipe
IS THERE ANY WAY TO WIPE EVERYTHING AND RESET THE whOLE SYSTEM?
i feel like my device is completely dead... so i need help and solution asap
my device is unlocked, rooted, and updated to 10.26.1.7 android 4.3.
it is a US version.
btw i asked ASUS support and they said they would charge CAN$330 for fixing it (replacing the main board), which is.........
So is there any ways to fix it without sending it to asus repair ccenter?
I want to make sure that
1. The wipe data function in the bootloader works
2. Does wiping data in bootloader fix the build.prop problem
Or do anyone of you have any idea of solving tthis problem?
ANYWAY TO WIPE EVeRUTHING INCLUDES SYSTEM thROUGH BOOTLOADER?
sorry for my bad english
Have you tried to install Full Recovery Mode ?
First Enable USB Debugging and watch if your Device is correctly recognized on you Device Manager .
Search and install the software , for first use i suggest to search some Tutorials about this.
Then you can use the Full Recovery Mode and format / wipe cache and system .