Related
Ok Guys.
I created this thread cause in the JACHero thread on at least every page everyone asks how to install it, what am I doing wrong, and why is it broken.
So let me give you step by steps of what exactly I have done for me and others to run Hero with out a problem. I will also create a thread with step by step on how to use Ubuntu Linux Live distro to partition your card.
Things you will need to make this work.
Your Brain
G1 Phone
SD Card reader
And the files I included in this thread.
My phone right now is running.
JACHero 2.3
NEW SPL
cyanogens recovery 1.2
8gb class 6sd with Swapper(Swap file on ext2 sd)
setCPU slightly overclock.
Results.
Ever since I did my new Buttons, and the SPL I included in this write up, I have not had one problem flashing any hero rom at all on my phone, nor did I ever have problem actually running hero roms.
So here goes.
First before you partition your card or do anything make sure your card is at least portioned to fat32, don't worry about any other partitions yet.
OK once you do that go ahead and take the radio zip file I am including in this thread and flash it on your phone.
But first make sure you don't already have new radio installed which is 2.22.19.26I THIS IS VERY IMPORTANT. To check what radio you have, power off your phone, and power it on while holding the camera button.
If you do have new radio you can continue on to flashing the new SPL.
Flashing your SPL. (PLEASE MAKE SURE YOU HAVE THE NEW BUTTONS INSTALLED)
Ok this is where it might get a little tricky, and you might require a SD card reader I know I did and frankly I think this is the best way to do it and I recommend every time you do put a new update on your sd card to update your phone do it through a card reader.
Now after you flash your SPL you might or I should say more then likely will get stuck at the T-Mobile G1 screen, this also might happen after new radio flash in the previous step. If this is the case do not freak out it's normal and your phone is not bricked, but this is why having a sd card reader is important.
Ok so Here is what you do after you have flashed new Radio and SPL(Note:The steps on running Linux live distro and using it to partition your card is coming up). Boot up Live distro of Ubuntu, when its done booting, go ahead and go into the partitioning program while your sd card is hooked up in the computer.
Go ahead and set up two partitions at this time. One EXT3, and of course the other one Fat32. Your ext3 partition doesn't have to be all that big. I actually have mine set up to 512.
Once you are done creating partitions, go ahead and put the latest JACHero on the FAT32 portion and flash away (don't forget to rename to update.zip).
At this point if you follow all of these steps there is no way possible that your phone should not boot right into the system to run the initial setup.
These steps pretty much walk you through steps as if you were starting with a phone that has completly nothing on it.
Also the first boot up after flashing the new ROM, might take a few mins at the HTC screen.
Once your phone loads up and you go through the setup process go ahead and run swapper, it should be an APP that's already pre-installed.
Once you run swapper go into the setting and change the location of your swap file from /sdcard/swapfile.swp to /system/sd/swap.swp
Here is the reason why. The default location is your FAT32 partition. If you all of a sudden mount your phone to the computer with the swap file running on FAT32 you will corrupt your sd card, and then you will have to wipe and reinstall everything.
If you set the location of your swap file on /system/sd/ that's actually your ext2/3 partition and never gets mounted and you never have to turn swapper off.
Well I hope this helps some of you out. I will be writing the walk through on loading up live distro of Linux and partitioning your card sometime today.
I have used this method on a couple different phones and it has worked each time. Also I really recommend installing cyanogens recovery 1.2, as its an excellent way of making a back up of your phone and doing future flashing.
If there is anything anyone thinks that could be done better feel free to post in here.
Remember different people have different ways. I have posted this way cause it has worked for me on my phone and two other phones I setup, and each time there was no hicups.
FILES:
Radio 2_22_19_26I
NEW SPL
CM-Recovery-1.2
Ubuntu Linux Download
DISCLAIMER:
I am not responsible for anything that you might have done to your phone by following these directions. Like I mentioned before so far every time I have used this method, I have had nothing but success.
While I can appreciate this topic, I think you need to speak with less certainty that this will always work properly the first time.
For example - I'm coming from the Ramjet ROM, and the process that I have taken.
Freshly formatted 4gb sd card with a 700mb EXT3 partition, the rest is fat32.
Loaded JACHero 2.3 and renamed update.zip
Wiped twice
Installed ROM
Phone went into boot loop - allowed to run for 10 minutes
Removed battery
Attempted to install ROM a second time
Boot loop again - allowed to run 10 minutes
Wiped again
Installed ROM
Boot loop again - allowed to run 10 minutes
It seems strange, as going from a standard JAC build previously I was able to just wipe, wipe, install and had JACHero 2.1 working without a hitch. I found this strange, as people were complaining about that build, but it seems 2.3 is what's giving me the most headache.
/shrug. Guess I'll go back to Ramjet.
Great post, dude. I've rooted my phone, flashed a few ROMs, including Haykuro's Hero, moved Rosie back to run on the phone instead of the SD card, overclocked and run Swapper. I was still a bit confused and hesitant to flash the JAChero ROM. I'm feeling better about it now. Gonna flash when I get home from work today.
TooSlo said:
While I can appreciate this topic, I think you need to speak with less certainty that this will always work properly the first time.
For example - I'm coming from the Ramjet ROM, and the process that I have taken.
Freshly formatted 4gb sd card with a 700mb EXT3 partition, the rest is fat32.
Loaded JACHero 2.3 and renamed update.zip
Wiped twice
Installed ROM
Phone went into boot loop - allowed to run for 10 minutes
Removed battery
Attempted to install ROM a second time
Boot loop again - allowed to run 10 minutes
Wiped again
Installed ROM
Boot loop again - allowed to run 10 minutes
It seems strange, as going from a standard JAC build previously I was able to just wipe, wipe, install and had JACHero 2.1 working without a hitch. I found this strange, as people were complaining about that build, but it seems 2.3 is what's giving me the most headache.
/shrug. Guess I'll go back to Ramjet.
Click to expand...
Click to collapse
I can completely see what you mean by that. But only reason I decided to make this, because two other phones that were having the exact same problems, started working after I did this.
They both had the same symptoms everyone else, and no one really knows where it came from.
So I made sure they had the right radio, then the right SPL, and every time I did something to the SD Card I killed the partitions completely not just format them.
But I destroyed the partition, recreated it and then formatted it to a file system of my choosing.
my g1 is fine ive flashed every rom here and never gotten stuck on boot loop, if anything the files youre downloading for recovery and spl must be corrupted try re downloading your radio file and spl's again.
Include Disclaimer
I like your post but here is something that I would add to your post.
Even though this has worked every time for you do not assume that it will work for every one, therefore make sure you put a disclaimer out there. As you may have seen before, there have been a lot of posters that have blamed others when their phones were either bricked or stuck in boot loops.
Remember....some people may do something wrong during a step and swear that they followed it perfectly and then blame you.
A detailed disclaimer could be of some help since a lot of people will be taking your post as LAW......
for somereason im not able to update my spl is it something u must do i keep gettin a veification faild message when im tryin to flash it wiht alt + s and i cant seem to update to jachero 2.3 im using a 1 g micro sd im really not sure whats going on i have the proper raido settings and everything. also im not really sure how to create 2 partitions on my memory card im running good ol windows vista
how fast is this running.
i tried it once without swapper and it was way to slow in my eyes in order to use at as an everyday phone.
hope you have something for me (is swapper this perfect solution?)
In my opinion the perfect solution is making a a linux swap partition on your sd card.
However last time I created a linux swap partition and created my swap file there after I rebooted my phone I got stuck at the G1 screen.
I think this might have been cause because of having three partitions on the card but I am not 100% sure.
So instead I just use swapper and make it mount the swap file on my ext3 partition which seems to make this rom run really freaking smooth.
Also I have noticed significant improvements of using ext3 vs ext2, but when research how the two different file systems work it makes sense why it would make a difference.
So to answer your question, is swapper the perfect solution? Im not sure if there is anyone perfect solution but I do know that this sure ass hell makes a huge difference in how your Hero rom runs.
for those having boot loops, how about help us help you, run ddms from sdktools and grab a log of whats going on, this way we can determine an issue, because those asking for help with bootloops and asking for help is like asking me to tell you whats wrong with your car over the phone. we cant tell if we cant see whats going on. so helps us, if you have adb and not the sdktools just type
Code:
adb logcat
this way we can see what your phones trying to do.
Excellent post! I wish I this was available yesterday when I did my first Hero ROM ever. The JAC thread is huugggeeee.
Not to hijack your post, but I'll add my two cents and experiences from yesterday if you do not mind.
-------------
Ok first time on Hero. Coming from DudesCupcake.
Pre
Formatted 1gb SD card 500mb Fat32, and the rest Ext3
hxxp://allshadow.com/forum/viewtopic.php?f=9&t=5870
1. Flashed Radio 2.22.19.26I from (update.zip) successful (camera+power to check)
hxxp://code.google.com/p/sapphire-port-dream/
2. Flashed SPL 1.33.2005 from (renamed update.zip) successful (new three android skateboard logo on bottom)
hxxp://code.google.com/p/sapphire-port-dream/
3. Updated to JACHero r2.2.1 from Page 1
Now I have a boot loop, Hero -> HTC...
After installed 2.2.1 should I pop my SD card out and format it again on my computer?
Trying to do the 2.2.1 again.... Wish me luck!
**Update**
Updating to the 2.2.1 again worked.
Ok, everything works!! Much thanks to Luckenbach for the moral support, and thanks to JAC and all the other guides that I linked in my process. So if anyone else is a noob like me you can do exactly what I did (I provided links for each step where I got it from) you should be ok.
XDA rules!
------
Quick questions for people with loop problems.
is your linux partition ext2 or ext3?
southeastbeast said:
Excellent post! I wish I this was available yesterday when I did my first Hero ROM ever. The JAC thread is huugggeeee.
Not to hijack your post, but I'll add my two cents and experiences from yesterday if you do not mind.
-------------
Ok first time on Hero. Coming from DudesCupcake.
Pre
Formatted 1gb SD card 500mb Fat32, and the rest Ext3
hxxp://allshadow.com/forum/viewtopic.php?f=9&t=5870
1. Flashed Radio 2.22.19.26I from (update.zip) successful (camera+power to check)
hxxp://code.google.com/p/sapphire-port-dream/
2. Flashed SPL 1.33.2005 from (renamed update.zip) successful (new three android skateboard logo on bottom)
hxxp://code.google.com/p/sapphire-port-dream/
3. Updated to JACHero r2.2.1 from Page 1
Now I have a boot loop, Hero -> HTC...
After installed 2.2.1 should I pop my SD card out and format it again on my computer?
Trying to do the 2.2.1 again.... Wish me luck!
**Update**
Updating to the 2.2.1 again worked.
Ok, everything works!! Much thanks to Luckenbach for the moral support, and thanks to JAC and all the other guides that I linked in my process. So if anyone else is a noob like me you can do exactly what I did (I provided links for each step where I got it from) you should be ok.
XDA rules!
------
Click to expand...
Click to collapse
When you do the CAMERA+POWER boot, what exactly does the second line from the top say?
lol I wasn't requesting help, I was adding to your post! To hopefully help other people =)
Oh I know I'm just collecting data right now that's it.
DREAM PVT 32B ENG S-OFF
HBOOT-1.33.2005 (DREA10000)
CLPD-4
RADIO-2.22.19.26I
Apr 20 2009,15:30:43
--
Edit: Also changing location of swapper from your info helped a lot! Thanks, I had the SD problem when I pulled out my SD card to put photos back on (instead of using adb) and I got stuck in a boot loop, I thought I was done for. Just rebooted it a few times and it was back up and running. Good tips =D
what do you mean by "new buttons"?
A quick question that ill ask here as to not clutter up JADs thread any more than it alreadsy is.
I have put on 3 of his roms in the last few days and where as they are stable they are dead slow at times for me. I am using a 2g class 2 sd card with an ext3 partition. How much more would a class 6 card speed swapper up? Is one worth getting?
Sorry to post up in this thread again, but I just wanted to provide some more of my experiences here.
I'd picked up Paragon Partition Manager and used that to format my SD card and create the ext3 partition on it as well. It seems something is wonky with how it created it, as every time I've created the partition, even with different sizes, I always get stuck in a boot loop when trying to install JACHero even though any other ROMs will install just fine.
I've put the update.zip onto my older 1gb card that came with my phone just to see if it would install, and though it took a while, it installed without any issues.
After going through the setup process, I attempted to put in my 4gb card with ext3 on it. Lo and behold, boot loop.
Seems something is funky with the way that Paragon Partition Manager creates an ext3 partition.
I'm now going to install an older ROM and go through the "creating an ext2 partition through the G1" method and then attempt to convert it to an ext3 through Cyan's instructions.
I'll try to keep up to date what's going on. I know this place isn't a blog, I'm just hoping someone will point out my idiocy if I'm making any huge mistakes somewhere.
TooSlo said:
While I can appreciate this topic, I think you need to speak with less certainty that this will always work properly the first time.
For example - I'm coming from the Ramjet ROM, and the process that I have taken.
Freshly formatted 4gb sd card with a 700mb EXT3 partition, the rest is fat32.
Loaded JACHero 2.3 and renamed update.zip
Wiped twice
Installed ROM
Phone went into boot loop - allowed to run for 10 minutes
Removed battery
Attempted to install ROM a second time
Boot loop again - allowed to run 10 minutes
Wiped again
Installed ROM
Boot loop again - allowed to run 10 minutes
It seems strange, as going from a standard JAC build previously I was able to just wipe, wipe, install and had JACHero 2.1 working without a hitch. I found this strange, as people were complaining about that build, but it seems 2.3 is what's giving me the most headache.
/shrug. Guess I'll go back to Ramjet.
Click to expand...
Click to collapse
did you try going into recovery and then choosing fix file extensions... that happend to me, it might be because you have no ext 2
I have a couple problems that I've been having since rooting my phone and installing cyanogen. I'm currently using cyanogenmod 4.2.2 with recovery 1.4 on my t-mobile g1. Also, I have the CM updater.
1. When I am using my stock headset, the phone restarts automatically at random intervals. Also, when the headphones are plugged in when the phone initially starts, the phone will definitely restart shortly after the home screen finishes loading.
2. When I am listening to music through the stock headset (either through the base music app or pandora) and I receive a call or text message, I lose all sound functionality (including in-call sounds) When this happens I have to unplug my phone and restart it again to regain sound functionality.
Are these bugs with the following that others are experiencing that can't be avoided:
1. cyanogenmod or
2. root or
3. cyanogen recovery 1.4?
Am I the only one that has had these problems? Is there another ROM that anyone would recommend that would most likely rectify this?
Help!!!!
I have the same problem.
No idea how to fix it?
G1
CyanogenMod 4.2.2
I think I fixed my own problem
I flashed this new radio:
http://sapphire-port-dream.googlecode.com/files/ota-radio-2_22_19_26I.zip
Then I backed up my sd card, formatted it, and partitioned it into a main fat32 partition and a 500mb ex2 partition.
Then I wiped and re-flashed cyanogen 4.2.2 and it works!!!
Also, it took me a while to figure out how to partition my sd card. It seems there is no easy way to do this with windows vista. I had to use Ubuntu's partition manager called "gparted". Apparently this can be done without actually installing Ubuntu if you just boot from the CD, but my computer wouldn't read the sd card through Ubuntu until I installed ubuntu and downloaded the updates. Then when I was done I tried to delete the Ubuntu partition (VERY BAD IDEA). Now my computer won't boot at all and I have to find a way to re-write my master boot record (MBR) which I don't know how to do. CRAP!!!
anoyment
ajchandler said:
Also, it took me a while to figure out how to partition my sd card. It seems there is no easy way to do this with windows vista. I had to use Ubuntu's partition manager called "gparted". Apparently this can be done without actually installing Ubuntu if you just boot from the CD, but my computer wouldn't read the sd card through Ubuntu until I installed ubuntu and downloaded the updates. Then when I was done I tried to delete the Ubuntu partition (VERY BAD IDEA). Now my computer won't boot at all and I have to find a way to re-write my master boot record (MBR) which I don't know how to do. CRAP!!!
Click to expand...
Click to collapse
Dude, take your HDD out of the computer, put it inside a USB enclosure and save your data, then just delete all partitions and install Windows again. Next time, you can just install Ubuntu from INSIDE Windows with "wubi.exe".
As for the sporadic resets, I am having the same problem. Only thing is: I had just flashed the 4.2.2 rom in the phone, wiped, and just then, being in the WC, I get a call, take the phone out of my pocket, it slips from my hand and drops right inside the can (yes, it had just been cleaned, Thank God), took it out fast enough, battery out. Couldn't find the screwdriver for it so I shook as much water as I could off, and let it dry in front of a full throttle fan for about 12 hrs.
It reset itself some times after that, but I don't know if the problem is the Rom, hope it is, (sorry). Next thing I know is, there's an update to ver. 4.2.5, so I updated, hasn't done it again yet, it's been 36hrs.
Hope I could help and anoy you some guys...
I have the same problem with my G1 (cyanogenMod-4.2.5 kernel 2.6.29.6-cm42 baseband 62.505.20.17H_2.22.19.26I), had to change from cyanogenMod-3.6.6 hoping it will fix the reboot problem, but it doesn't change
I reformat SD card (1 Gb) and repartitioned it, doesn't fix the problem. The difference is that is reboots now less frequently (with cyanogenMod-3.6.6 it started reboot suddenly and did it every 20min - 3 hrs, now 1-3 times a day).
Seems that it somehow related to WiFi connection, and may be email receiving process (may be free space problem? But as far as i can check there is free space available on the SD card).
If with cyanogenMod-3.6.6 i could assume that some new installed application caused it, then with 4.2.5 i didn't install anything, and it starts rebooting again recently.
Is there a way to write a log or something to see which app caused reboot? It's linux anyway, so should be smth to see the reason, right?
Updated to CM-4.2.7.1 and added a 4GB Class 6 TF
luk1 said:
I have the same problem with my G1 (cyanogenMod-4.2.5 kernel 2.6.29.6-cm42 baseband 62.505.20.17H_2.22.19.26I), had to change from cyanogenMod-3.6.6 hoping it will fix the reboot problem, but it doesn't change
I reformat SD card (1 Gb) and repartitioned it, doesn't fix the problem. The difference is that is reboots now less frequently (with cyanogenMod-3.6.6 it started reboot suddenly and did it every 20min - 3 hrs, now 1-3 times a day).
Seems that it somehow related to WiFi connection, and may be email receiving process (may be free space problem? But as far as i can check there is free space available on the SD card).
If with cyanogenMod-3.6.6 i could assume that some new installed application caused it, then with 4.2.5 i didn't install anything, and it starts rebooting again recently.
Is there a way to write a log or something to see which app caused reboot? It's linux anyway, so should be smth to see the reason, right?
Click to expand...
Click to collapse
LUKE, I AM YOUR FATHER, NOT...
Just kidding, just couldn't let a chance like this pass me by, sorry .
2 days ago I changed the 2GB TF (which was a class 1) with a 4GB TF, now a class 6. Wiped the phone and added an ext3 1GB partition.
Yesterday I updated the CYanogen Mod to ver 4.2.7.1. Haven't seen another reset since, but it could be that I haven't used the phone much other than for phone calls since the update. But altogether it seems pretty stable.
I just used the cm-updater and everything was done automatically.
If you don't already have it, download it from the market, check for new roms and download the one I said. Please let us know if it makes any difference for you.
ajchandler said:
Then when I was done I tried to delete the Ubuntu partition (VERY BAD IDEA). Now my computer won't boot at all and I have to find a way to re-write my master boot record (MBR) which I don't know how to do. CRAP!!!
Click to expand...
Click to collapse
To reinstall the Vista MBR:
http://support.microsoft.com/kb/927392/en-us
Hi guys!
First of all, I want to say that I'm *really* new to andoid and this rooting stuff. My device is a HTC HERO with VILLAINROM-v13. That being said, this is my problem:
I tried using Link2SD to install apps on my sd card, since my phone's internal memory was getting full (apps2sd was nowhere to be found in the market for some reason). I formatted my sd card using ROM manager (also flashed clockwork while I was at it), then I tried to use Link2SD to move some apps. But I got an error saying 'failed to mount' when I started Link2SD, and so I didn't get it to work. Eventually, I gave up.
A few minutes later, my phone rebooted just randomly (it took extremely long to boot up again). A few minutes after that, it happened again. This time it didn't take so long, but when my home screen appeared, all my apps just vanished, including the Android Market. Phone's internal storage was empty, and there was nothing on the first and second partition of the sd card.
I'm kinda panicing. I don't know how big the damage is, and if it's able to be fixed at all. I don't know much about rooting and hacking the Android OS (actually, I bought this thing with villainrom on it). I don't know what to search on google, I don't know how to put another ROM on there or restore the current one, I don't know what to do!
Any help would be welcome
Hello everyone -- So I loaded S2E (Android Market), after trying some scripts and App2SD (but the S2E app said it would run a script taking care of my App2SD/other changes), and have since removed App2SD.
Now, FINALLY, the SD card's partition is being used for internal storage, and my phone's internal storage reads 0.00001 out of my available 156 MB. The system is stable, even if it takes a little longer to get my apps and internal storage re-mounted on the phone, which I totally understand.
But I have two problems I've never had before:
(1) ROM Manager (Premium) says it's flashing Clockworkmod successfully, but when I boot to recovery, it's still Amon_RA. (Lately, I've been flashing between the two to do some SD card partitioning.) That seems troubling and problematic.
(2) (EDIT: When my phone is booting up,) My phone shows the HTC logo, then the Cyanogenmod 7 skateboard/circular arrow loading screen for a really, really long time. It goes back to the HTC logo, once again to the HTC logo, and then the CM7 loading screen one more time -- but this time it works, fairly quickly. It does this consistently.
If these aren't really problems (and #1 doesn't seem too bad; even though I have ROM Manager, I prefer Amon_RA to Clockworkmod anyway so far), I'll leave it alone. But I was hoping someone would know a quick fix for quickening my loading time. Things seem stable (for now) but it is a little troubling.
Any help or suggestions for the noob are greatly appreciated. Not sure if trying to uninstall ROM Manager, or just manually flashing Clockworkmod, would help or make things worse.
Problem 1:download the cwm recovery to your pc and flash it through your computer
Problem 2:Go to system/media and delete bootanimation.zip
(BUT before deleting something make a backup and also open the .zip's and choose which animation you wanna keep)
Hi, i have a clone of GS, and i have 3 storage:
-The phone (system file)
-Internal storage (app but just 2gb)
-SD Card
But, i can't move or install app, game on the sd card, i can just on phone and internal storage. My phone is root, how can i amke ?
thanks.
What is a "GS"?
If the "GS" is Android, you can try this way:
Settings | Applications | Manage applications | Downloaded | Move to SD Card
ze7zez said:
What is a "GS"?
If the "GS" is Android, you can try this way:
Settings | Applications | Manage applications | Downloaded | Move to SD Card
Click to expand...
Click to collapse
gs is galaxy s 3, don't work for me, anyone have guide ?
flavien317 said:
gs is galaxy s 3, don't work for me, anyone have guide ?
Click to expand...
Click to collapse
Try apps2sd app from market
Sent from my HTC One X using xda app-developers app
vivek_bhoj said:
Try apps2sd app from market
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
ok, i have try many app on market, but i know don't work or im noob. but i have find i can change system file for reverse the sd card (8g) and internal stockage (2g) ? how can i make ?
You can't do many with internal storage unless you root your phone. What i know about internal storage is cannot be partitioned.
sent from htc evo 4g sprint supersonic with energy rom
How to install apps on SD
I did it many time and I think that to fully install apps on SD you need to know its steps:
1. Root phone.
2. Partition your SD card
3. Install app that help move all data app on SD, such as Link2SD, S2E, ...
all that stuff u can find on Google or just in xda forum. they talk 'bout that every day
But I think maybe U did it all but still got unsuccessful. I think 2GB internal storage is big enough to install app and U don't need to try anymore. Just choose what app to keep and what not to keep for your phone. GS III is a smart expensive phone, Is your matter deserve to try? I just have 180MB internal storage (Mini) and do a lot of stuff just to get more 500MB, but I lost 1 SD-Card dear
if you have a locked phone(not rooted) its up to every applications security settings if you can move it to sd or not.
This setting is deprecated on Google Play and new apps will have licensing service , but for now its up to developer choice.
thx all, i have find, i cgange a file sytem vlag if i think and work.
My sd card isnt detected
I was flashed and running with s-off. I was using 4K atom azul for the evo 4g. I wanted to be able to use my FFC but i couldnt figure it out with that rom. and then i decided to upgraded to the one that look like black beans but is made by team dirt. hated the fact i couldnt use my camera so i reverted back. after reverting back i got the 5 vibrations thing and black screen. Now i have my s-on and did the ruu. after several failed attempts my phone suddenly booted back to the 4k atom azul. i was stoked that i knew how to get it back but now i have no way of using the wifi or bluetooth, and plus my sd card is not found by any program says i have it mounted and when i go to settings to unmount it says to insert a sdcard. i have my 32 gb sd card in there. I dont know why my phone is no longer rooted. and i am scared to pull the battery out and try anything because of the simple fact i might not have a phone for another couple days and i about drove myself crazy not having a phone.
a little info:
I had s-off and idk what else... other than using amon ra for recovery image and formatting and reset factory data before installing another rom. it became an addiction to get another rom every week. and now i am stuck in the situation described above.
I have been doing the reboot over and over the past couple days before i got the 5 vibrations fixed back to normal, that the information below is what i remember from trying to recover...
supersonic evt3 ship s-on
hboot-2.10.0001
microp-041f
touch panel-amtel224_16ab
radio-2.15.00.11.19
oct 15 2010, 12:07:00
This above might not be exactly right.
I used a PC36IMG.zip file that i had after reformatting my sd card. it would not run the PC36IMG.zip file that i put on the root and recover my system so i had to do the ruu thing...
It would read something like this below...
Loading...[PC36DIAG.zip]
No image!
Loading...[PC36DIAG.nbh]
No image or wrong image!
Loading...[PC36IMG.zip]
and it would successfully read the PC36IMG.zip but would not restore and a little scroll bar as it read the file would come up... i used fastboot usb and miraculously i have my 4K atom that i tried to reflash on my evo before it messed up.
I know that i still have s-on but it puzzles me how i have the s-on and running a rooted rom. my hotspot works and so does the GPS and navigation, i just can not connect to my wifi, or boot back into recovery without getting the black screen and 5 vibes of diagnostic so i am kinda stuck. My phone will send text and call out and let me download apps for what little internal memory i have on it; I hate i dont have an sd card to save pictures too, or and sd card to put music on to play in the car...
Thank everyone for your time, I just joined today but I have been a flashing freak for the last year or so once i figured out how to do it. I used unrevoked as my flashing software. If anyone can help it would be greatly appreciated. Thanks
Usually my phone gives me the option to move recently downloaded or updated apps to the sd card...