Hi
My phone is fitted with hboot menu.Can not install the software in any way.131 gives the error.
If you help I would be glad
S-ON RL
HBOOT 98.00000
RADIO 3822.10.08.04_M
SH16TTJ02216
C:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 0.98.0000
INFOversion-baseband: 3822.10.08.04_M
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 2.10.401.5
INFOserialno: SH16TTJ02216
INFOimei: 356708045582853
INFOproduct: saga
INFOplatform: HBOOT-7230
INFOmodelid: PG8810000
INFOcidnum: HTC__M27
INFObattery-status: good
INFObattery-voltage: 4013mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 361a7ba6
INFOhbootpreupdate: 12
INFOgencheckpt: 0
all: Done!
@frkccn
So what did you do to your phone, it just doesn't wake up one day and say security warning.
The problem is your CID of "HTC__M27". Fear not though, its an easy fix... That's if you can make a goldcard.
You need to look into making a goldcard on the PC, Check here and here.
Once you have the the goldcard you can install 2.10.401.8 RUU.
I had this problem and ended up having to get the phone Jtagged. Or you can try S off your device with a XTC clip and try flashing boot and recovery through adb, then flash a custom rom
Sent from my HTC Desire S using XDA App
Easy does it first damned....... Let's look at other options first.
Adb won't work cause if is booting into bootloader.
Gold card, I did. But still did not
frkccn said:
Gold card, I did. But still did not
Click to expand...
Click to collapse
Goldcard, not done right.....
Come on, seriously? You have the problem, you said its urgent, so give some info on what you did to get the security warning and the method of creating the goldcard. And try a different card.
foX2delta said:
Goldcard, not done right.....
Come on, seriously? You have the problem, you said its urgent, so give some info on what you did to get the security warning and the method of creating the goldcard. And try a different card.
Click to expand...
Click to collapse
I'll try again in a different card Thank you
foX2delta said:
Goldcard, not done right.....
Come on, seriously? You have the problem, you said its urgent, so give some info on what you did to get the security warning and the method of creating the goldcard. And try a different card.
Click to expand...
Click to collapse
Its too late for a Gold card I think. Have you flashed an official RUU over s-off bootloader, custom recovery and rom?
Sent from my HTC Desire S using XDA App
first_damned said:
Its too late for a Gold card I think. Have you flashed an official RUU over s-off bootloader, custom recovery and rom?
Sent from my HTC Desire S using XDA App
Click to expand...
Click to collapse
But try another gold card and flash a RUU the same or newer than 2.10.401.5
Sent from my HTC Desire S using XDA App
first_damned said:
But try another gold card and flash a RUU the same or newer than 2.10.401.5
Sent from my HTC Desire S using XDA App
Click to expand...
Click to collapse
Thank you all
The problem is the card
I love you all
frkccn said:
Thank you all
The problem is the card
I love you all
Click to expand...
Click to collapse
All sorted now? What did you do?
Sent from my HTC Desire S using XDA App
frkccn said:
Hi
My phone is fitted with hboot menu.Can not install the software in any way.131 gives the error.
If you help I would be glad
S-ON RL
HBOOT 98.00000
RADIO 3822.10.08.04_M
SH16TTJ02216
C:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 0.98.0000
INFOversion-baseband: 3822.10.08.04_M
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 2.10.401.5
INFOserialno: SH16TTJ02216
INFOimei: 356708045582853
INFOproduct: saga
INFOplatform: HBOOT-7230
INFOmodelid: PG8810000
INFOcidnum: HTC__M27
INFObattery-status: good
INFObattery-voltage: 4013mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 361a7ba6
INFOhbootpreupdate: 12
INFOgencheckpt: 0
all: Done!
Click to expand...
Click to collapse
Hi, did you try to flash a wrong RUU onto the phone? When you do that for some reason HTC doesn't like it and *locks* the bootloader into *security warning* mode... basically you can't flash anything that isn't officially signed by HTC anymore.
The way to solve it, is to find out the original version of your phone, and flash the RUU of that one. Then re-S-OFF / re-root it as you see fit.
From your fastboot getvar, it seems like you may need:
2.10.401.5 version ROM with HTC M27 regional settings?
Go to: http://forum.xda-developers.com/showthread.php?t=1002506
Download the right RUU for your ROM
HTC_Saga etc etc._2.10.401.5_blah blah blah...
And run it / flash it should solve it! I had that problem a few days ago... THought I could 'upgrade' my stock firmware by flashing a higher RUU... and this happened.
@anchemis
He has already solved his problem. Also you will NOT find a a EU RUU with a cid like that. Thus he HAS to use a goldcard.
first_damned said:
All sorted now? What did you do?
Sent from my HTC Desire S using XDA App
Click to expand...
Click to collapse
I made another Goldcard.
foX2delta said:
@anchemis
He has already solved his problem. Also you will NOT find a a EU RUU with a cid like that. Thus he HAS to use a goldcard.
Click to expand...
Click to collapse
Oh? What CID is it? I've never seen one like that before.
Related
*********
Hi,
down there you find the original thread/question but i think the only possibility to keep the data on a Sensation with not working touchscreen may be to flash a system.img from a RUU and hope it boots.
Is it possible to flash system.img via fastboot with a locked S-ON Sensation?
Thanks
Regards
Daniel
*********
Hello,
my GF owns a unrooted S-ON completely stock Sensation and did the official german t-mobile update (sorry we did not write the number down).
After the update the phone boots but the touchscreen does not work. You can't enter the pin code and also the volume buttons does not work. Only the power button works "a little bit". You can turn on / off screen but you can't open the shutdown menu.
I can enter Bootloader but as it's locked i don't know what i can do there.
Is it possible to mount the file system to backup some data?
Or is there any other way to apply a official htc firmware WITHOUT DELETING ALL USER DATA?
Thank you very much
PS I should have rooted / s-offed it before, damn it... ;-)
Wrong thread, this should go in Q&A section
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
Okay sorry - could someone move it please?
Anyone?
Sent from my Desire HD using XDA App
Okay another idea.
Is it possible to extract a german T-Mobile RUU and just flash the system.img via fastboot? Do i have a chance to make it work again this way?
Or is it not possible to flash system.img when the phone is stock?
hey... i got the same problem.. tried a few things but still no working sensation :/
What did you try?
I think running a T Mobile RUU should work (but the user data is beeing deleted)
Sent from my Desire HD using XDA App
no, there is till now no matching tmob ruu :/
So is it only possible to run a RUU with the exactly same version as on the phone?
please help me
Dacoco said:
*********
Hi,
down there you find the original thread/question but i think the only possibility to keep the data on a Sensation with not working touchscreen may be to flash a system.img from a RUU and hope it boots.
Is it possible to flash system.img via fastboot with a locked S-ON Sensation?
Thanks
Regards
Daniel
*********
Hello,
my GF owns a unrooted S-ON completely stock Sensation and did the official german t-mobile update (sorry we did not write the number down).
After the update the phone boots but the touchscreen does not work. You can't enter the pin code and also the volume buttons does not work. Only the power button works "a little bit". You can turn on / off screen but you can't open the shutdown menu.
I can enter Bootloader but as it's locked i don't know what i can do there.
Is it possible to mount the file system to backup some data?
Or is there any other way to apply a official htc firmware WITHOUT DELETING ALL USER DATA?
Thank you very much
PS I should have rooted / s-offed it before, damn it...
Click to expand...
Click to collapse
My device doesn't start, only I can see is HTC logo in start, I flashed a new Rom but it didn't work, some peoples said that my device ruu is currupt, can anyone please give link to system.img?
Ahmedsiar24 said:
My device doesn't start, only I can see is HTC logo in start, I flashed a new Rom but it didn't work, some peoples said that my device ruu is currupt, can anyone please give link to system.img?
Click to expand...
Click to collapse
Please start a new thread, is the htc logo in black with four "!" signs at the edges of the screen? please give us more information about the phone(s-off?). also there are lots of RUUs in this link, you can just try them or manually pull the files you want from them.
m.m.m said:
Please start a new thread, is the htc logo in black with four "!" signs at the edges of the screen? please give us more information about the phone(s-off?). also there are lots of RUUs in this link, you can just try them or manually pull the files you want from them.
Click to expand...
Click to collapse
Thanks but I couldn't found system.img
And my device is pyramid s-off
Ahmedsiar24 said:
Thanks but I couldn't found system.img
And my device is pyramid s-off
Click to expand...
Click to collapse
Type fastboot getvar all
Post everything except imei and serial number
all info
rzr86 said:
Type fastboot getvar all
Post everything except imei and serial number
Click to expand...
Click to collapse
INFOversion: 0.5
INFOversion-bootloader: 1.27.0000
INFOversion-baseband: 11.23.3504.07_M2
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.32.61.51
INFOserialno: SH17MV803118
INFOimei: 358313041667499
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813000
INFOcidnum: ORANG001
INFObattery-status: good
INFObattery-voltage: 3854mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 617f0a98
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Ahmedsiar24 said:
INFOversion: 0.5
INFOversion-bootloader: 1.27.0000
INFOversion-baseband: 11.23.3504.07_M2
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.32.61.51
INFOserialno: SH17MV803118
INFOimei: 358313041667499
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813000
INFOcidnum: ORANG001
INFObattery-status: good
INFObattery-voltage: 3854mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 617f0a98
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Click to expand...
Click to collapse
your device is on S-ON not S-OFF
you can use a ruu.exe for your region but unfortunately there is no ics for your device
and with S-ON you can't downgrade
maybe with a goldcard you can by pass it but i am not sure
by the way is your bootloader locked or unlocked?
info
rzr86 said:
your device is on S-ON not S-OFF
you can use a ruu.exe for your region but unfortunately there is no ics for your device
and with S-ON you can't downgrade
maybe with a goldcard you can by pass it but i am not sure
by the way is your bootloader locked or unlocked?
Click to expand...
Click to collapse
It's unlocked
Ahmedsiar24 said:
It's unlocked
Click to expand...
Click to collapse
flash 4ext recovery
take it from here
http://d-h.st/rG7
extract the recovery.img and flash it via fastboot command
the command is fastboot flash recovery recovery.img
then from for 4ext:
format all partitions except sdcard
enable smartflash(because you are on S-ON)
flash a custom rom
done
note: enable smartflash exactly before flashing the rom
hello guys im new to modding htc
my brother unlocked the bootloader of this phone and he tried to install a custom rom but he ended up in bricking the phone
current status is the phone only goes to boot logo and then restarts,
yes i can go to bootloader menu and yes the phone detects in my device manger as MY htc
what should i do to make the phone up and running
please help
Have you tried flashing the boot.IMG?
Did I help you? Hit THANKS!
Galaxy S3 (New love interest, stock)
Desire HD (Retired, REVOlution)
Galaxy Note 10.1 (Big Bad Wolf, stock)
GuyInTheCorner said:
Have you tried flashing the boot.IMG?
Did I help you? Hit THANKS!
Galaxy S3 (New love interest, stock)
Desire HD (Retired, REVOlution)
Galaxy Note 10.1 (Big Bad Wolf, stock)
Click to expand...
Click to collapse
thank you for the replay
no i didnt try
im new so not yet touched i know the basic
im good at samsung modding though
what should i do to flash a new boot.img ?
slytidar said:
thank you for the replay
no i didnt try
im new so not yet touched i know the basic
im good at samsung modding though
what should i do to flash a new boot.img ?
Click to expand...
Click to collapse
Open the zip of the Rom installed and copy boot.img to fastboot folder. Boot into bootloader and in command prompt type fastboot flash boot boot.img
Then clear caches and reboot
Sent from my HTC One XL using xda premium
fixed bt flashing a stock boot.img
thanks
31ken31 said:
Open the zip of the Rom installed and copy boot.img to fastboot folder. Boot into bootloader and in command prompt type fastboot flash boot boot.img
Then clear caches and reboot
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
hi my phone dont pass the HTC logo and then turns off when i enter to recovery i get ***locked*** the PC dont recognize the phone, when i enter to FASTBOOT the PC shows that is conected but "USB DEVICE NOT RECOGNIZED" and in command promp shows "waiting device" any ideas why?? cant manage to install the stock rom PLEASE HELP
slytidar said:
fixed bt flashing a stock boot.img
thanks
Click to expand...
Click to collapse
The FAQ thread might be helpful for you in future:
http://forum.xda-developers.com/showthread.php?t=2136172
And my guide thread:
http://forum.xda-developers.com/showthread.php?t=2593382
Incorrect ROM
I was wondering if you could provide some guidance. I rooted and unlocked the bootloader on my HTC One X AT&T and tried to install a custom rom. I stupidly installed a rom that was not suitable for the AT&T version. My phone now cycles from the white HTC start screen to off. I can access the HBOOT and FASTBOOT. I tried to install an ruu and the installation wizard could not determine what image I have on it. It then gave a 159 error and said incorrect ruu. I took it from
http://www.htc.com/us/support/htc-one-x-att/news/
and is version 5.18.502.1.
Is it possible that I have deleted my ruu? Can my phone be fixed?
Heisenberg said:
The FAQ thread might be helpful for you in future:
http://forum.xda-developers.com/showthread.php?t=2136172
And my guide thread:
http://forum.xda-developers.com/showthread.php?t=2593382
Click to expand...
Click to collapse
AndyrewK said:
I was wondering if you could provide some guidance. I rooted and unlocked the bootloader on my HTC One X AT&T and tried to install a custom rom. I stupidly installed a rom that was not suitable for the AT&T version. My phone now cycles from the white HTC start screen to off. I can access the HBOOT and FASTBOOT. I tried to install an ruu and the installation wizard could not determine what image I have on it. It then gave a 159 error and said incorrect ruu. I took it from
http://www.htc.com/us/support/htc-one-x-att/news/
and is version 5.18.502.1.
Is it possible that I have deleted my ruu? Can my phone be fixed?
Click to expand...
Click to collapse
Just try flashing a ROM that's actually for this device using TWRP.
I'm not sure what you mean by deleted your RUU, the RUU is the program on your PC that flashes the stock ROM and firmware to your phone.
I took a ROM that has no requirements in the description, this one
http://forum.xda-developers.com/one-x-att/development/rom-t2964941
But when installing it required bootloader version 2.14 or up. It seems all other ROMs have a firmware requirement but my phones version main is blank.
My HBOOT info is
EVITA PVT SHIP S-ON RL
HBOOT-1.14.0002
RADIO-0.19AS.32.09.11_2
OpenDSP-v29.1.0.45.0622
eMMC-boot
Jun 11 2012, 14:36:28
and my getvar all returns
INFOversion: 0.5
INFOversion-bootloader: 1.14.0002
INFOversion-baseband: 0.19as.32.09.11_2
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main:
INFOversion-misc: PVT SHIP S-ON
INFOserialno: HT************
INFOimei: *******************
INFOproduct: evita
INFOplatform: HBOOT-8960
INFOmodelid: PJ8310000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4161mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 1a7fdca3
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Can I do anything to get this phone working again?
Heisenberg said:
Just try flashing a ROM that's actually for this device using TWRP.
I'm not sure what you mean by deleted your RUU, the RUU is the program on your PC that flashes the stock ROM and firmware to your phone.
Click to expand...
Click to collapse
AndyrewK said:
I took a ROM that has no requirements in the description, this one
http://forum.xda-developers.com/one-x-att/development/rom-t2964941
But when installing it required bootloader version 2.14 or up. It seems all other ROMs have a firmware requirement but my phones version main is blank.
My HBOOT info is
EVITA PVT SHIP S-ON RL
HBOOT-1.14.0002
RADIO-0.19AS.32.09.11_2
OpenDSP-v29.1.0.45.0622
eMMC-boot
Jun 11 2012, 14:36:28
and my getvar all returns
INFOversion: 0.5
INFOversion-bootloader: 1.14.0002
INFOversion-baseband: 0.19as.32.09.11_2
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main:
INFOversion-misc: PVT SHIP S-ON
INFOserialno: HT************
INFOimei: *******************
INFOproduct: evita
INFOplatform: HBOOT-8960
INFOmodelid: PJ8310000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4161mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 1a7fdca3
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Can I do anything to get this phone working again?
Click to expand...
Click to collapse
Try flashing this:
https://docs.google.com/file/d/0BxOSUQI9FeHVekhLY2h0Q1ozMEU/preview
Here's the thread it's from:
http://forum.xda-developers.com/showthread.php?t=2400766
You'll need to flash the boot.img from the ROM zip via fastboot after flashing the ROM. So once TWRP has flashed the ROM, use the reboot menu in TWRP to reboot directly to the bootloader, then use fastboot to flash the boot.img:
Code:
fastboot flash boot boot.img
Apologies, the MagioRom worked a treat.
Thank you for your help.
AndyrewK said:
I took a ROM that has no requirements in the description, this one
http://forum.xda-developers.com/one-x-att/development/rom-t2964941
But when installing it required bootloader version 2.14 or up. It seems all other ROMs have a firmware requirement but my phones version main is blank.
My HBOOT info is
EVITA PVT SHIP S-ON RL
HBOOT-1.14.0002
RADIO-0.19AS.32.09.11_2
OpenDSP-v29.1.0.45.0622
eMMC-boot
Jun 11 2012, 14:36:28
and my getvar all returns
INFOversion: 0.5
INFOversion-bootloader: 1.14.0002
INFOversion-baseband: 0.19as.32.09.11_2
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main:
INFOversion-misc: PVT SHIP S-ON
INFOserialno: HT************
INFOimei: *******************
INFOproduct: evita
INFOplatform: HBOOT-8960
INFOmodelid: PJ8310000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4161mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 1a7fdca3
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Can I do anything to get this phone working again?
Click to expand...
Click to collapse
AndyrewK said:
Apologies, the MagioRom worked a treat.
Thank you for your help.
Click to expand...
Click to collapse
Cool. You still have some work to do though, in order to run that ROM (or any other) you need to update your firmware, which requires s-off.
I noticed that,
I tried to make it S-OFF using the firewater, the http://forum.xda-developers.com/showthread.php?t=2155071 method and with Rumruner to no avail. I am root and have superCID, I will keep searching and try to figure out how to do it.
Heisenberg said:
Cool. You still have some work to do though, in order to run that ROM (or any other) you need to update your firmware, which requires s-off.
Click to expand...
Click to collapse
AndyrewK said:
I noticed that,
I tried to make it S-OFF using the firewater, the http://forum.xda-developers.com/showthread.php?t=2155071 method and with Rumruner to no avail. I am root and have superCID, I will keep searching and try to figure out how to do it.
Click to expand...
Click to collapse
There was a reason I linked you to the Kickdroid ROM earlier, flash that and then use Rumrunner to get s-off.
Thanks for that. I was actually wrong. The reason why Rumrunner wasn't working was because I was on a network that required a proxy. I ran the latest RUU to get the main-version back and then flashed the Magio ROM. In the few hours I used it I became accustomed to it.
Heisenberg said:
There was a reason I linked you to the Kickdroid ROM earlier, flash that and then use Rumrunner to get s-off.
Click to expand...
Click to collapse
plz help me
i need the latest ruu for sensation xe htc__044
it's urgent
thanks in advance
foxthemene said:
plz help me
i need the latest ruu for sensation xe htc__044
it's urgent
thanks in advance
Click to expand...
Click to collapse
If I understand correctly htc__044 is Asia WWE, here is the RUU:
http://www.androidruu.com/getdownlo...0U_10.51.9007.27_M3_release_198358_signed.exe
(will download immediately)
For other RUUs:
http://www.androidruu.com/index.php?developer=Pyramid
foxthemene said:
plz help me
i need the latest ruu for sensation xe htc__044
it's urgent
thanks in advance
Click to expand...
Click to collapse
Hi,
Are you s-off?
Supercid?
i tried the ruu u mentioned but it didn't work
it gives me error
update from 3.33.707.151 to 1.35.707.1
i am s-on
and cid htc__044
foxthemene said:
i tried the ruu u mentioned but it didn't work
it gives me error
update from 3.33.707.151 to 1.35.707.1
i am s-on
and cid htc__044
Click to expand...
Click to collapse
Hi,
So, what version-main do you have?
If you are s-on ,it is much harder to match up the RUU,version-main, and cid.
They all have to match,or else the RUU will not work.
Can you do :
Code:
fastboot getvar version-main
malybru said:
Hi,
So, what version-main do you have?
If you are s-on ,it is much harder to match up the RUU,version-main, and cid.
They all have to match,or else the RUU will not work.
Can you do :
Code:
fastboot getvar version-main
Click to expand...
Click to collapse
Hi, I have the exact same problem with foxthemene. And I also have tried the given RUU 1.35.707.xxx. And it doesn't work, it keep giving 155 ERROR UNKOWN.
So here it is my getvar all
version: 0.5
version-bootloader: 1.27.0000
version-baseband: 11.24A.3504.31_M
version-cpld: None
version-microp: None
version-main:
serialno:
imei:
product: pyramid
platform: HBOOT-8260
modelid: PG5813000
cidnum: HTC__044
battery-status: good
battery-voltage: 4047mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 617f0a98
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
I notice the version-main is no longer there. It shows up the first time I run the RUU, but after it failed, the version-main is gone.
So right now I'm confused, where exactly is the RUU for my CID? I upgraded this device using OTA, is that why there is no apparent RUU for my CID. How about factory images (the one they used for brand new Sensation), surely HTC have RUU for the base factory images, no?
aaulia said:
Hi, I have the exact same problem with foxthemene. And I also have tried the given RUU 1.35.707.xxx. And it doesn't work, it keep giving 155 ERROR UNKOWN.
So here it is my getvar all
I notice the version-main is no longer there. It shows up the first time I run the RUU, but after it failed, the version-main is gone.
So right now I'm confused, where exactly is the RUU for my CID? I upgraded this device using OTA, is that why there is no apparent RUU for my CID. How about factory images (the one they used for brand new Sensation), surely HTC have RUU for the base factory images, no?
Click to expand...
Click to collapse
Hi,
Firstly ,please remove your serial number and imei number.
You have a ICS/JB firmware, so a 1.35 RUU which is meant for GB , will not work.
I am not sure why your version main would disappear.
What happens when you boot up your phone?
Do you still have the update?Can you run it?
Is you phone a Sensation, or the XE version?
malybru said:
Hi,
Is you phone a Sensation, or the XE version?
Click to expand...
Click to collapse
depending from the MID i think it is the normal sensation
malybru said:
Hi,
Firstly ,please remove your serial number and imei number.
You have a ICS/JB firmware, so a 1.35 RUU which is meant for GB , will not work.
I am not sure why your version main would disappear.
What happens when you boot up your phone?
Do you still have the update?Can you run it?
Is you phone a Sensation, or the XE version?
Click to expand...
Click to collapse
Hi yes my device is normal Sensation, honestly I don't know why my version-main would disappear. But at least after digging deeper for a while I finally manage to flash CM 9.1.0 into my device, so at least it's now usable.
====
Woops, thanks, I removed them, sorry I kind of in a panic, didn't realize I just copy-pasted all of it
====
So this is the whole story, and what I know... hope this would help...
EDIT: I have HBOOT 1.27 (UNLOCKED) and S-ON
First, It started out with 4.0.3 (ICS) device that came from OTA (this was previously my wife's and I didn't touch it with custom rom, etc), when I received it. So the first think I do is do HTCDev unlock, it went smoothly, I installed TWRP (my favourite, but it seems I make a mistake here), it installed SuperSU, and I got root.
After that, I want to try custom ROM because I really dislike how slugish Sense is (I tried to like it, disable bunch of apps, but coming from Nexus, it's just doesn't feel right). So with my previous phones, I always have the original factory image(s) for fallback just incase I screw up . So after searching for a while, the only one RUU that I found that most likely work with my device is the 1.35.707 RUU (I didn't realize it was for GB).
Feeling safe after I got it, I went ahead and flash Albinoman's CM 10.2 using TWRP, and it stuck in a bootloop spectacularly . At this point everything is still normal, in terms of version-main, etc. So I think what the hell, let's flash RUU. So I tried it, put the device in fastboot, relocked, fireup RUU, at first it works, detect all the version, then it failed with 155 UNKNOWN ERROR after "updating signature" step, every single time (I tried couple of times). The version-main started missing after the first flash, the 2nd flash there is no
version: x.xxx.xxx to version x.xx.xx
Click to expand...
Click to collapse
just
From version: <blank> to version x.xx.xx
Click to expand...
Click to collapse
Now I remember in the past, updating my sister in-law's Rhyme, this also happen, but somehow, it succeeded in updating the device anyway. So I didn't think too much of it.
So, after hitting the wall for a while, I looked up why people love 4ext so much for HTC devices, turn out there is this SmartFlash thing and how flashing boot.img is tricky. Well I switch to 4ext 1.0.0.5 and flash CM 9.1.0 (just want to be safe, so I didn't flash Albinoman again). And what do you know, it works .
So that is my story so far. I just want to know is there any ICS RUU to fallback to stock for my Device or do I have to SuperCID to get it from other Device. or Maybe I have to downgrade firmware, install GB RUU and then update through OTA (or maybe I have to search for the OTA also).
in order to downgrade you have to S-OFF and supercid
then you can use the gb RUU which also downgrades firmware and hboot version
after that just do the official update
about OTA it could be a possibility to use it but you must have stock recovery
edit:i just saw your edit.you are already in ics firmware
HELP ME
I NEED SHIP ROM HTC ONE MINI DIRTRIST ASIS
INFORMATION:
INFOversion: 0.5
INFOversion-bootloader: 2.22.0000
INFOversion-baseband: 1.24.40e.00.26
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.10.707.3
INFOversion-misc: PVT SHIP S-ON
INFOserialno: HT428WA01630
INFOimei: 355865057500040
INFOmeid:
INFOproduct: m4_u
INFOplatform: HBOOT-8930
INFOmodelid: PO5810000
INFOcidnum: HTC__044
INFObattery-status: good
INFObattery-voltage: 4313mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-09ff2ded
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
hhmobile said:
HELP ME
I NEED SHIP ROM HTC ONE MINI DIRTRIST ASIS
INFORMATION:
INFOversion: 0.5
INFOversion-bootloader: 2.22.0000
INFOversion-baseband: 1.24.40e.00.26
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.10.707.3
INFOversion-misc: PVT SHIP S-ON
INFOmeid:
INFOproduct: m4_u
INFOplatform: HBOOT-8930
INFOmodelid: PO5810000
INFOcidnum: HTC__044
INFObattery-status: good
INFObattery-voltage: 4313mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-09ff2ded
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Click to expand...
Click to collapse
Hi,
You should edit your post and remove :
INFOserialno:
INFOimei:
i have one xl i ulocked bootloader but still s-on anf flash cw and flash ViperXL_4.2.0_2 but the phone keep restarting so i relock the bootloader and try RUU_Evita_UL_ATT_US_1.44.502.1_Radio_0.15.3201.09_ release_249105.exe so i had error 140 bootloader version error plz help me what ruu should i use the var info are :
INFOversion: 0.5
INFOversion-bootloader: 2.14.0000
INFOversion-baseband: 0.15.3201.09
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.18.502.6
INFOversion-misc: PVT SHIP S-ON
INFOserialno: HT25CW301324
INFOimei: 359691043865040
INFOproduct: evita
INFOplatform: HBOOT-8960
INFOmodelid: PJ83*****
INFOcidnum: CWS__001
INFObattery-status: good
INFObattery-voltage: 3715mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-97c9a06e
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.187s
thanx
Sent from my One X using Tapatalk
---------- Post added at 11:46 AM ---------- Previous post was at 11:44 AM ----------
slemankurdi said:
i have one xl i ulocked bootloader but still s-on anf flash cw and flash ViperXL_4.2.0_2 but the phone keep restarting so i relock the bootloader and try RUU_Evita_UL_ATT_US_1.44.502.1_Radio_0.15.3201.09_ release_249105.exe so i had error 140 bootloader version error plz help me what ruu should i use the var info are :
INFOversion: 0.5
INFOversion-bootloader: 2.14.0000
INFOversion-baseband: 0.15.3201.09
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.18.502.6
INFOversion-misc: PVT SHIP S-ON
INFOserialno: HT25CW301324
INFOimei: 359691043865040
INFOproduct: evita
INFOplatform: HBOOT-8960
INFOmodelid: PJ83*****
INFOcidnum: CWS__001
INFObattery-status: good
INFObattery-voltage: 3715mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-97c9a06e
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.187s
thanx
Click to expand...
Click to collapse
OK so I am going to answer you before u are strangled. Your problem is hboot 2.14 is not the latest. You need 2.15. To get it you run a 3.18 ruu I think. Easy option is to load beastmode kernel.
And always search before posting. This has been mentions thousands of times in the forums.
Sent from my One X using Tapatalk
slemankurdi said:
i have one xl i ulocked bootloader but still s-on anf flash cw and flash ViperXL_4.2.0_2 but the phone keep restarting so i relock the bootloader and try RUU_Evita_UL_ATT_US_1.44.502.1_Radio_0.15.3201.09_ release_249105.exe so i had error 140 bootloader version error plz help me what ruu should i use the var info are :
INFOversion: 0.5
INFOversion-bootloader: 2.14.0000
INFOversion-baseband: 0.15.3201.09
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.18.502.6
INFOversion-misc: PVT SHIP S-ON
INFOserialno: HT25CW301324
INFOimei: 359691043865040
INFOproduct: evita
INFOplatform: HBOOT-8960
INFOmodelid: PJ83*****
INFOcidnum: CWS__001
INFObattery-status: good
INFObattery-voltage: 3715mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-97c9a06e
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.187s
thanx
Click to expand...
Click to collapse
The RUU you tried to flash is an older one. You were trying to go backwards. Since you do NOT have superCID you can run this one and get back to stock: http://dl3.htc.com/application/RUU_..._10.130.32.34_release_signed_With_Partial.exe
Edit: This RUU matches you CID
After that runs, you will need to reflash your recovery in bootloader.
Then I would recommend getting S-Off: http://forum.xda-developers.com/showthread.php?t=2540232
You should do this because Sense Roms run smoother with Hboot 2.15 and you need S-Off to do this:
http://forum.xda-developers.com/showthread.php?t=2517148&highlight=ruu
Hopefully this helps.
Madcat8686 said:
The RUU you tried to flash is an older one. You were trying to go backwards. Since you do NOT have superCID you can run this one and get back to stock: http://dl3.htc.com/application/RUU_..._10.130.32.34_release_signed_With_Partial.exe
Edit: This RUU matches you CID
After that runs, you will need to reflash your recovery in bootloader.
Then I would recommend getting S-Off: http://forum.xda-developers.com/showthread.php?t=2540232
You should do this because Sense Roms run smoother with Hboot 2.15 and you need S-Off to do this:
http://forum.xda-developers.com/showthread.php?t=2517148&highlight=ruu
Hopefully this helps.
Click to expand...
Click to collapse
If you need help getting S-OFF or any other ROM's, Kernels or rooting the phone, my friend and I have complete a toolkit for most HTC phones that you can find here that will easily take care of any question you have or do things you may not know how to.
http://forum.xda-developers.com/showthread.php?t=2587677
ChadMan097 said:
If you need help getting S-OFF or any other ROM's, Kernels or rooting the phone, my friend and I have complete a toolkit for most HTC phones that you can find here that will easily take care of any question you have or do things you may not know how to.
http://forum.xda-developers.com/showthread.php?t=2587677
Click to expand...
Click to collapse
slemankurdi has to accomplish the RUU first which is not included in the toolkit. I acknowledge that Wizzrah put a lot of work into the toolkit but he will tell you himself that using a toolkit without understanding what you are doing is not a good idea.
Madcat8686 said:
slemankurdi has to accomplish the RUU first which is not included in the toolkit. I acknowledge that Wizzrah put a lot of work into the toolkit but he will tell you himself that using a toolkit without understanding what you are doing is not a good idea.
Click to expand...
Click to collapse
Right, I meant that mainly on getting it to be S-OFF.
phonegeekjr said:
Sent from my One X using Tapatalk
---------- Post added at 11:46 AM ---------- Previous post was at 11:44 AM ----------
OK so I am going to answer you before u are strangled. Your problem is hboot 2.14 is not the latest. You need 2.15. To get it you run a 3.18 ruu I think. Easy option is to load beastmode kernel.
And always search before posting. This has been mentions thousands of times in the forums.
Sent from my One X using Tapatalk
Click to expand...
Click to collapse
Edited.
Sent from my Evita.
timmaaa said:
Edited.
Sent from my Evita.
Click to expand...
Click to collapse
He is S-Off and has the right CID for the RUU I suggested. A 3.18 RUU should run fine.
ChadMan097 said:
Right, I meant that mainly on getting it to be S-OFF.
Click to expand...
Click to collapse
Your don't need a toolkit to get s-off. Getting s-off is simple.
I appreciate the work that's gone into the toolkit but they bypass some much needed learning. Without the experience gained by doing things manually users can almost never recover when they have problems in future.
Sent from my Evita.
---------- Post added at 10:07 AM ---------- Previous post was at 10:06 AM ----------
Madcat8686 said:
He is S-Off and has the right CID for the RUU I suggested. A 3.18 RUU should run fine.
Click to expand...
Click to collapse
His post states that he's s-on. But his CID is ok so he's fine to run the RUU.
Sent from my Evita.
phonegeekjr said:
Sent from my One X using Tapatalk
---------- Post added at 11:46 AM ---------- Previous post was at 11:44 AM ----------
OK so I am going to answer you before u are strangled. Your problem is hboot 2.14 is not the latest. You need 2.15. To get it you run a 3.18 ruu I think. Easy option is to load beastmode kernel.
And always search before posting. This has been mentions thousands of times in the forums.
Sent from my One X using Tapatalk
Click to expand...
Click to collapse
Ok, you're on the right track but not quite right. There's no reason the phone wouldn't boot with his current setup. You don't need any special firmware just to get it to boot. The 2.15 firmware is only required to stop reboots and signal drops once the ROM has booted. Also, the 3.18 RUU doesn't contain the 2.15 firmware, it contains the 2.14 firmware. The 2.15 firmware is a flashable zip found in Turge's stock Sense 5 ROM thread.
Sent from my Evita.
---------- Post added at 11:12 AM ---------- Previous post was at 11:09 AM ----------
slemankurdi said:
i have one xl i ulocked bootloader but still s-on anf flash cw and flash ViperXL_4.2.0_2 but the phone keep restarting so i relock the bootloader and try RUU_Evita_UL_ATT_US_1.44.502.1_Radio_0.15.3201.09_ release_249105.exe so i had error 140 bootloader version error plz help me what ruu should i use the var info are :
INFOversion: 0.5
INFOversion-bootloader: 2.14.0000
INFOversion-baseband: 0.15.3201.09
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.18.502.6
INFOversion-misc: PVT SHIP S-ON
INFOserialno: HT25CW301324
INFOimei: 359691043865040
INFOproduct: evita
INFOplatform: HBOOT-8960
INFOmodelid: PJ83*****
INFOcidnum: CWS__001
INFObattery-status: good
INFObattery-voltage: 3715mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-97c9a06e
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.187s
thanx
Click to expand...
Click to collapse
I think the reason Viper kept rebooting is probably because you didn't flash the boot.img with fastboot, did you? You need to do this if you're s-on. Right now you should run the 3.18 RUU, then flash a custom recovery again, then flash Viper and remember to flash the boot.img with fastboot.
Sent from my Evita.
timmaaa said:
Ok, you're on the right track but not quite right. There's no reason the phone wouldn't boot with his current setup. You don't need any special firmware just to get it to boot. The 2.15 firmware is only required to stop reboots and signal drops once the ROM has booted. Also, the 3.18 RUU doesn't contain the 2.15 firmware, it contains the 2.14 firmware. The 2.15 firmware is a flashable zip found in Turge's stock Sense 5 ROM thread.
Sent from my Evita.
Click to expand...
Click to collapse
Sorry I'm not big in updating ruu and firmware. Thought this was like all others. Again sorry
Sent from my One X using Tapatalk
phonegeekjr said:
Sorry I'm not big in updating ruu and firmware. Thought this was like all others. Again sorry
Sent from my One X using Tapatalk
Click to expand...
Click to collapse
It's all good. Maybe just increase your knowledge a bit before giving advice on certain subjects that you're not super clear on.
Sent from my Evita.
timmaaa said:
It's all good. Maybe just increase your knowledge a bit before giving advice on certain subjects that you're not super clear on.
Sent from my Evita.
Click to expand...
Click to collapse
K I will next time
Sent from my One X using Tapatalk
Madcat8686 said:
slemankurdi has to accomplish the RUU first which is not included in the toolkit. I acknowledge that Wizzrah put a lot of work into the toolkit but he will tell you himself that using a toolkit without understanding what you are doing is not a good idea.
Click to expand...
Click to collapse
Yep! I agree.
Sent from my HTC One X using Tapatalk
wizzrah said:
Yep! I agree.
Sent from my HTC One X using Tapatalk
Click to expand...
Click to collapse
Thanks Wizzrah. I suppose I was speaking for you there and I apologize. I meant to type "He probably will tell you...".
I still appreciate you helping me out several months ago before you built that fancy tool kit. It looks pretty impressive and I know you put a lot of hard work into it. I'm still amazed that you spend so much time connecting with folks in real time solving their issues.
Madcat8686 said:
Thanks Wizzrah. I suppose I was speaking for you there and I apologize. I meant to type "He probably will tell you...".
I still appreciate you helping me out several months ago before you built that fancy tool kit. It looks pretty impressive and I know you put a lot of hard work into it. I'm still amazed that you spend so much time connecting with folks in real time solving their issues.
Click to expand...
Click to collapse
Every time I help someone personally, we always end up talking about life and other stuff. When you connect with someone, it's an amazing feeling. Not only do I get them a "new" phone, but in return I get a new pen pal lol. I try to make my toolkits as engaging as possible and I teach them what everything does and why. At the end of the session, every person ends up with a rooted, s-off, evita and knows Adb and fastboot commands. I like to consider myself more lenient in the fact that I'll help someone with something rather then redirecting them to another forum. I feel like tech support in a way Thanks for the input.
Sent from my HTC One X using Tapatalk
thanx a lot
thanx a lot for all replays and i will try 3.18 ruu and post what happend........
downloading.......
not solved
i tried RUU_EVITA_UL_JB_45_S_Cingular_US_3.18.502.6_Radio_0.24p.32.09.06_10.130.32.34_release_signed_With_Partial.exe and
got error 158 so what i can do for it
slemankurdi said:
i tried RUU_EVITA_UL_JB_45_S_Cingular_US_3.18.502.6_Radio_0.24p.32.09.06_10.130.32.34_release_signed_With_Partial.exe and
got error 158 so what i can do for it
Click to expand...
Click to collapse
Is your bootloader unlocked?
thanx for replay
Madcat8686 said:
Is your bootloader unlocked?
Click to expand...
Click to collapse
no the bootloader is relocked and here is an image.....attached
please my friend i want the phone to back without restarts randomly there is no matter what the rom version is even if it 2.3.3
I have a HTC One S T Mobile which i had rooted and tried to install a Cyanogenmod 11 nightly build on and now i am
stuck in the HTC Inspire loop! I researched and found that i could install back to the stock OS using the RUU but i keep getting the error140 Wrong bootloader
I Have enclosed a pic of info from my phone also the RUU i tried was
RUU_Ville_U_TMOUS_1.53.531.16_Radio_0.16.31501S.02_10.18.31501S.08L_release_262073_signed
Other info is
c:\FB>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 2.15.0000
INFOversion-baseband: 1.13.50.05.31
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.14.531.17
INFOversion-misc: PVT SHIP S-ON
INFOserialno: HT24WW418779
INFOimei: 359902042697882
INFOproduct: vle
INFOplatform: HBOOT-8960
INFOmodelid: PJ4011000
INFOcidnum: T-MOB010
INFObattery-status: good
INFObattery-voltage: 4101mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-64bedd38
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.067s
Please Please Help if at all possible
rp05 said:
I have a HTC One S T Mobile which i had rooted and tried to install a Cyanogenmod 11 nightly build on and now i am
stuck in the HTC Inspire loop! I researched and found that i could install back to the stock OS using the RUU but i keep getting the error140 Wrong bootloader
I Have enclosed a pic of info from my phone also the RUU i tried was
RUU_Ville_U_TMOUS_1.53.531.16_Radio_0.16.31501S.02_10.18.31501S.08L_release_262073_signed
Other info is
c:\FB>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 2.15.0000
INFOversion-baseband: 1.13.50.05.31
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.14.531.17
INFOversion-misc: PVT SHIP S-ON
INFOserialno: HT24WW418779
INFOimei: 359902042697882
INFOproduct: vle
INFOplatform: HBOOT-8960
INFOmodelid: PJ4011000
INFOcidnum: T-MOB010
INFObattery-status: good
INFObattery-voltage: 4101mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-64bedd38
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.067s
Please Please Help if at all possible
Click to expand...
Click to collapse
You are actually S-ON, that means you can only flash a RUU of same version as installed or a newer one + you need an RUU specific to your CID. I'm gonna try finding a fitting RUU.
LS.xD said:
You are actually S-ON, that means you can only flash a RUU of same version as installed or a newer one + you need an RUU specific to your CID. I'm gonna try finding a fitting RUU.
Click to expand...
Click to collapse
I think you can use the one linked in this thread.
http://forum.xda-developers.com/showthread.php?t=2640420&page=2
I'm pretty sure I had the same ROM etc...
post #15.
808phone said:
I think you can use the one linked in this thread.
http://forum.xda-developers.com/showthread.php?t=2640420&page=2
I'm pretty sure I had the same ROM etc...
post #15.
Click to expand...
Click to collapse
Looking pretty good: --> http://d-innovations.org/RUU_Ville_U_JB_45_S_TMOUS_3.14.531.11_Radio_1.13.50.05.31_10.30.50.08L_release_309489_signed_ICS_2.exe.7z
Damn guys thanks very much for the quick reply will try now
rp05 said:
Damn guys thanks very much for the quick reply will try now
Click to expand...
Click to collapse
If you're phone is back alive you should think about gaining S-OFF.It simply makes life a bit easier
--> S-OFF <-- You're lucky, you're RUU is compatible with Moonshine S-OFF
Keep getting the Update Utility has stopped working error now when it is rebooting bootloader please see the enclosed picture
rp05 said:
Keep getting the Update Utility has stopped working error now when it is rebooting bootloader please see the enclosed picture
Click to expand...
Click to collapse
What update do you try to perform? Is it RUU_Ville_U_JB_45_S_TMOUS_3.14.531.11_Radio_1.13.50.05.31_10.30.50.08L_release_309489_signed_ICS_2.exe? WRONG
Here i found the original link --> THIS ONE WILL WORK FOR YOU
Sry for our mistake
yeah thats the one ! unzipped before i installed
Hello, I have similar issue with my phone. Everytime phone starts automatically in fastboot mode, recovery is not available. What can I do to fix my HTC One S (S4)? I was trying to fix my phone, using RUU, so i download RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4 for my phone with cid HTC__032. Was it good RUU?
When I go to fastboot mode, and type command in cmd, it always gives "device not found" or "signature verify fail" and I can't do anything.
Can somebody help me please?
rp05 said:
yeah thats the one ! unzipped before i installed
Click to expand...
Click to collapse
When finished updated
http://moonshine.io/
or
http://rumrunner.us/
to gain S-OFF
Sjegar71 said:
Hello, I have similar issue with my phone. Everytime phone starts automatically in fastboot mode, recovery is not available. What can I do to fix my HTC One S (S4)? I was trying to fix my phone, using RUU, so i download RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4 for my phone with cid HTC__032. Was it good RUU?
When I go to fastboot mode, and type command in cmd, it always gives "device not found" or "signature verify fail" and I can't do anything.
Can somebody help me please?
Click to expand...
Click to collapse
what happens when you select "bootloader" ?
Which Firmware u had installed before?
You should read this guide pls --> RUU guide
have you tried unlock BL again?
You're online Sjegar71 ??
Please download this toolkit --> http://forum.xda-developers.com/devdb/project/dl/?id=2688
and check if you still have the unlock_code.bin stored on your computer. (You used this earlier to unlock the bootloader)
also download the ville stock recovery
LS.xD said:
You're online Sjegar71 ??
Please download this toolkit --> http://forum.xda-developers.com/devdb/project/dl/?id=2688
and check if you still have the unlock_code.bin stored on your computer. (You used this earlier to unlock the bootloader)
also download the ville stock recovery
Click to expand...
Click to collapse
I have downloaded this toolkit. Yes I have unlock_code.bin on my computer. I don't know, did you see my video presenting phone's booting process: https://www.youtube.com/watch?v=nVRJZKwnGNU. Stock recovery downloaded
lets go to your own topic!!! http://forum.xda-developers.com/showthread.php?p=51236488
Boys was away the weekend and couldnt get on ! Just wanted to thank you for the help it worked flawlessly Will try to set it to S-OFF now !
rp05 said:
Boys was away the weekend and couldnt get on ! Just wanted to thank you for the help it worked flawlessly Will try to set it to S-OFF now !
Click to expand...
Click to collapse
Which S-off method will u use?
sorry jus did ! am going to try the moonshine one i think ! you have any recomended roms you think i should use once im done ?
rp05 said:
sorry jus did ! am going to try the moonshine one i think ! you have any recomended roms you think i should use once im done ?
Click to expand...
Click to collapse
Make sure you have moonshine FITTING to your firmware...
As far as i know you already use TwistedKat 2.4 --> For me it matches my needs best. But feel free to try different roms You already to the knowledge to change the roms
LS.xD said:
Make sure you have moonshine FITTING to your firmware...
As far as i know you already use TwistedKat 2.4 --> For me it matches my needs best. But feel free to try different roms You already to the knowledge to change the roms
Click to expand...
Click to collapse
with moonshine I keep getting ADB error
and am getting problem with SuperSU Binary update failed with the rooting steps