How to install gingerbird on cm7.2 flashed phone......it will be nice if any body tells in step by step.....i m new to this.....
1) Download stock gingerbread rom
2) Go to CWM recovery
3) Backup ur current rom(if u want to revert back)
4) Wipe data/factory reset
5) Wipe cache partition
6) Now go to download mode (vol down + home key + power) and connect to ur pc
7) Open ODIN and select the files that came with the rom package
8) Click Start
Congrats u have successfully flashed a stock rom
just download firmware u want
1.start odin multi downloader
2.in OPS tab select beni_v1.ops
3.check one package
4.then in ONE PACKAGE tab select ur package
5.reboot your device in download mode (volume down+home button+power button)
6.connect it to computer via usb
7.when odin recognize device press Start and wait till finishes installing
And there u go !
if ur stuck on start up just go into recovery mode and wipe data and cashe
Related
Im kinda new at this stuff, so could anyone tell me how to flash wanted's ROM. I've got Dexters Froyo on there already and I just wanted to try Wanteds version. So if anyone could help I would appreciate it.
if you got Dexters Froyo on there already ..and you should have system recovery in your phone.otherwise you find and download the System Recovery (Open recovery)and install it.
download Wanted rom and copy the folder "Wanted rom XXX" to your SD CARD\ nandroid\openrecovery directory of your sdcard
lunch the System Recovery
Press install recovery
Press Boot recovery
use the Vol + or - button on the right hand side of the phone to choose Nandroid and press Camera button
then select the restore option (use Vol + -) press Camera button
then select the "Wanted rom XXX"(use Vol + -) press Camera button
and then select restore all and wait ..after the process..press go back ..go back... go back to the main recovery manu..
then select Wipe Data / Factory reset
and then reboot the phone ...
mediaon said:
if you got Dexters Froyo on there already ..and you should have system recovery in your phone.otherwise you find and download the System Recovery (Open recovery)and install it.
download Wanted rom and copy the folder "Wanted rom XXX" to your SD CARD\ nandroid\openrecovery directory of your sdcard
lunch the System Recovery
Press install recovery
Press Boot recovery
use the Vol + or - button on the right hand side of the phone to choose Nandroid and press Camera button
then select the restore option (use Vol + -) press Camera button
then select the "Wanted rom XXX"(use Vol + -) press Camera button
and then select restore all and wait ..after the process..press go back ..go back... go back to the main recovery manu..
then select Wipe Data / Factory reset
and then reboot the phone ...
Click to expand...
Click to collapse
Alright so it is the same way as Dexters. Thanks!
hey guys,
i've a big problem with my Samsung P6800.
After problems with CM9, i got a Bootloop and an error within CWM: Davlik Cache -> E:unknown volume for path [sd-ext]
So I tried restoring an old NAND-Backup, but of course without SD access I wasn't successful.
Next option: Get back to Stock Rom via ODIN (the first time ODIN was closed by Windows during the flash action):
1. Start Odin and select the pit file from Sammobile
2. Plug in Tab in Download Mode
3. "Start" -> Success
4. Unplug
5. Select the newest ATO (P6800XXLQ2_P6800OXALQ2_ATO) in "PDA"-Field
6. Plug in Tab in Download Mode
7. "Start" -> Fail-Message when trying to Flash "KERNEL".
What can I do? Is it right to only select the ROM in the PDA field?
I don't have any access to the recovery anymore.
If you have any solution or tipp, please let me know
greetz!
Thomas
Here's the complete steps for rooting Samsung Galaxy ACE II (for newbie) thanks to this site (http://support.evanhe.com/2012/11/13/how-to-root-samsung-galaxy-ace-ii/)
1. Download this (https://www.opendrive.com/files/63284615_5VxZV/RootPack.zip)
2. Connect your phone to the PC with the USB cable and open it up in the file manager. (You can then also backup all your stuff.)
3. Right click RootPack.zip and choose extract here, then copy upd.zip to “Phone” on the file manager. Leave your phone connected to the PC via USB up to step #8
4. In the extracted files of RootPack.zip open Odin3-v1.85 -> Odin3 v1.85.exe
5. Click on PDA and choose I8160XXLD8_ready_to_root_ANT.tar.md5 that you’ll find in the extracted files of RootPack.zip Do not click start.
6. Boot your phone in download mode (hold vol down + home + power) and wait a few seconds so that your PC detected it.
7. Now click start in Odin. If the box on the left upper side isn’t turning green hit start a 2nd time.
8. Once odin has finished, disconnect your phone from the USB and boot your phone into recovery mode (vol up + home + power)
9. Select update from SD Card via the volume keys and select upd.zip and flash it.
This is for newbie like me. Credits to evanhe
Cache
can we install the cwm from cahce
if our device is rooted ?
I just wanna share
Installation CWM Recovery (ClockWorkMod)
1. Download file (you can select one of below)
CWM-6.0.2.3.zip
CWM-6.0.2.3-temp.zip
CWM-6.0.2.3-touch.zip
Stock-Recovery.zip
2. Connect your USB to your phone then copy CWM file from your computer to your SD Card
3. Turn Off your phone
4. Press (Power + Volume Down) to entry CWM Recovery then wait until the pictures come out Android then press Home (Install From Stock Recovery)
Press (Power + Volume Down) to entry CWM Recovery (Install from CWM)
5. Choose apply update from external storage in the option menu (Install From Stock Recovery)
Choose Install zip from sdcard (Install from CWM)
6. Find a CWM file was downloaded earlier then reboot (Install From Stock Recovery and Install from CWM)
Installation Root
1. Download SuperSU
2. Connect your USB to your phone then copy superuser file from your computer to your SD Card
3. Turn Off your phone
4. Press (Power + Volume Down) to entry CWM Recovery
5. Choose Install zip from sdcard then choose zip
6. Find a superuser file was downloaded earlier then reboot
thanks for sharing:good:
Tutorial fixed
Tried this several times and comes with nothing, I followed tutorial really carefully. The install process through stock recovery running and it said finished, but when I tried to reboot again the CWM Recovery not installed. And then I figure out that the tutorial uncompleted.
So here it is the fixed Tutorial for Root and CWM Hisense HS-EG909 / AD683G
Installation CWM Recovery (ClockWorkMod)
1. Download file (you can select one of below), remember theres is two type of CWM Recovery. One is a CWM/CWM Touch Recovery, and others is CWM Recovery-Temporary
CWM-6.0.2.3.zip
CWM-6.0.2.3-temp.zip
CWM-6.0.2.3-touch.zip
Stock-Recovery.zip
2. Connect your USB to your phone then copy CWM file (both of them :CWM-6.0.2.3.zip and CWM-6.0.2.3-temp.zip)
from your computer to your SD Card
3. Turn Off your phone
4. Press (Power + Volume Down) to entry Stock Recovery then wait until the pictures come out Android then press Home (Install From Stock Recovery)
5. Still in Stock Recovery choose apply update from external storage in the option menu, install CWM-6.0.2.3-temp.zip.
In this state you are in CMW temporary condition, your screen will flicker often but it is okay because this just temporary. You can use volume "up+down" to navigate, "home" for menu and "search" for select.
6. Find a CWM-6.0.2.3.zip file and then install.
7. After it to makesure you can choose Advanced/Reboot into recovery mode. And your device should be reboot into CWM Recovery "Permanent Mode", your screen will not flicker again.
Sorry if this bother TS, I just hope if theres another person see this tutorial so they would not confuse like I did.
i tried Installing CWM Recovery on my CALAXY CORE I8262 and when i press Volume up +Home Key +Power Key the phone
shaking and not go to CWM Recovery it bootup the system and when press Volume down +Home Key +Power Key it asked me to continue press volume up and when do it bootup to the system again then i go to setting backup and reset i press restore factory it the phone reboot and show clockword recovery 6.3.0.6 i press factory rest then rebot the phone it open again in clockwork recovery and i choose install zip from sd card i have cusom rom in sdcard and the system dont show me the rom in the sdcard then i out sdcard and try it in onther phone and the cusom Rom is already there and when i put it back and press install zip from sd card it don't detect card and show me 0 and clochwash and, odin and kies don't reconzgines it and arealady install samsung driver to computer please help me
If you are installing stock rom then
1. Switch off your phone.
2. Boot it in DOWNLOAD mode not in (CWM Recovery mod). You can so by pressing VOLUME DOWN + HOME + POWER BUTTON.
3. Then connect it to PC using USB cable.
4. Place the downloaded stock ROM in ODIN folder and open up ODIN.exe file (it will detect your phone in few seconds but if it doesn't detect then install samsung drivers and try again).
5. Then click on PDA button and choose PDA button. REMEMBER to uncheck REPARTITION.
6. Final click on START button wait for the flashing to get completed.
-------------------------------------------------------------------------
II ) if you are installing custom ROM through CWM Recovery then keep the custom ROM in root folder of SD card it means just in the location that you see just after opening the SD card on PC. Don't place it in any folder.
More over if you are flashing the new Cathezilla ROM then don't do it right now because it is not working right now. Wait for the developer and others to test.
You will have to flash stock rom through ODIN
Sent from my GT-I8262 using XDA Premium 4 mobile app
thanx thanx thanx thanx thanx thanx thanx thanx bro it work thanx very much