Related
hello all,
first of all THANK YOU very much for this ROM - really appreciate it!!!
second of all:
I currently have a stock rom on my device - rooted.
As I understand I need to replace the stock recovery with that of krylon360(http://forum.xda-developers.com/show....php?t=1099374) and then follow the steps listed in the first post??
is the link in my post is the link to the final version of cwm for our devices??
Thank you very much for the help and sorry for the noobenst this is my first rom change
alon2 said:
hello all,
first of all THANK YOU very much for this ROM - really appreciate it!!!
second of all:
I currently have a stock rom on my device - rooted.
As I understand I need to replace the stock recovery with that of krylon360(http://forum.xda-developers.com/show....php?t=1099374) and then follow the steps listed in the first post??
is the link in my post is the link to the final version of cwm for our devices??
Thank you very much for the help and sorry for the noobenst this is my first rom change
Click to expand...
Click to collapse
your link wont load, just make sure you go to the thread that says CWM FINAL by krylon 360 and follow the steps and you will be fine
dsexton702 said:
your link wont load, just make sure you go to the thread that says CWM FINAL by krylon 360 and follow the steps and you will be fine
Click to expand...
Click to collapse
this is the link(as I see it in my broser)
what are the steps after I replaced the recovery?
is it as simple as following the steps in this thread?cause I saw people had problems...
Thank you very much for the help again
Just go to cyclopscomputers.com/gs4g
Sent from my SGH-T959V using XDA App
Use root explorer to copy/replace recovery.bin put update.zip on root of sd card, reboot into recovery.
Sent from my SGH-T959V using XDA Premium App
This is what I did and worked perfectly. But I allready had KD1 which I recomend you get. Download the recovery and update.zip and put both of them on the root of your sd card. Then get root explorer from the market. Open root explorer and go down to sdcard. In the sd card you are gonna find the recovery file you placed in there. Your long press it and its gomma say copy. Copy that and press back button and then your at the main page of root explorer again. Its gonna say paste and cancle at.the bottom but dont press anything yet. You go all the way down to system and go into it and then into /bin. In /bin your gonna press the mount r~w button at the top right which allows you to paste the file. You press paste at bottom left and its gonna ask if you want to overwrite say yes.(if it didnt ask you overwrite that either means the file you downloaded was renamed.or there was a (2) or (3) on it if you downloaded various times. Just take the ending out so its.just.recovery)
Now back out to homescreen of your phone.and if you have kd1 you can get into recovery from quickboot if not then turn off your phone and hold powerbutton and both volume keys while the phones turning on normally it will go to a bluish screen with an android.(recovery) here you click reinstall packages and your done
Sent from my SGH-T959V using XDA Premium App
sorry i have to do this... but i'm pretty sure theres more than enuff info to figure it out... noob or noobiest... didnt have to start a random thread
Moved to general.
rickyy00 said:
This is what I did and worked perfectly. But I allready had KD1 which I recomend you get. Download the recovery and update.zip and put both of them on the root of your sd card. Then get root explorer from the market. Open root explorer and go down to sdcard. In the sd card you are gonna find the recovery file you placed in there. Your long press it and its gomma say copy. Copy that and press back button and then your at the main page of root explorer again. Its gonna say paste and cancle at.the bottom but dont press anything yet. You go all the way down to system and go into it and then into /bin. In /bin your gonna press the mount r~w button at the top right which allows you to paste the file. You press paste at bottom left and its gonna ask if you want to overwrite say yes.(if it didnt ask you overwrite that either means the file you downloaded was renamed.or there was a (2) or (3) on it if you downloaded various times. Just take the ending out so its.just.recovery)
Now back out to homescreen of your phone.and if you have kd1 you can get into recovery from quickboot if not then turn off your phone and hold powerbutton and both volume keys while the phones turning on normally it will go to a bluish screen with an android.(recovery) here you click reinstall packages and your done
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
Thank you very much for the detailed explanation.
I'll try that tomorrow at work cause at home I can't get windows 7 to recognize my device
To be honest u don't need a pc and can do the whole thing from your phone with the right apps and it works flawlessly haveing roottookit and supermanger also helpful in the process
Sent from my SGH-T959V
rose2jam said:
To be honest u don't need a pc and can do the whole thing from your phone with the right apps and it works flawlessly haveing roottookit and supermanger also helpful in the process
Sent from my SGH-T959V
Click to expand...
Click to collapse
how can I do it without a PC?
downloading now supermanger , didnt find roottookit
not working...
So I did as you said(didn't use my PC by downloading stright to the phone and using root explorer)
boot into recovery using quick boot app(exclamation mark screen with little green robot)
pressed the reinstall packages
it says:
-- Applying Multi CSC
-- Installing Multi CSC
-- Install from sdcard..(in yellow)
Finding update package(in yellow)
E:Can't mount /dev/block/mmcblk0p1(in red)
(No such file or directory)(in red)
E:Can't mount SDCARD:update.zip(in red)
Installation aborted(in red)
did I do something wrong?
alon2 said:
So I did as you said(didn't use my PC by downloading stright to the phone and using root explorer)
boot into recovery using quick boot app(exclamation mark screen with little green robot)
pressed the reinstall packages
it says:
-- Install from sdcard..(in yellow)
Finding update package(in yellow)
E:Can't mount /dev/block/mmcblk0p1(in red)
(No such file or directory)(in red)
E:Can't mount SDCARD:update.zip(in red)
Installation aborted(in red)
did I do something wrong?
Click to expand...
Click to collapse
Did you move the the update.zip to the correct directory?
yep moved it to /sdcard
Sent from my SGH-T959V using XDA App
Did u add the recovery file from downloaded to system .bin folder
Sent from my SGH-T959V
rose2jam said:
Did u add the recovery file from downloaded to system .bin folder
Sent from my SGH-T959V
Click to expand...
Click to collapse
yes I did just like the tutorial said to(overwrite the original)
/dev/block/mmcblk0p1 - really doesn't exist
E:Can't mount /dev/block/mmcblk0p1(in red)
(No such file or directory)(in red)
Click to expand...
Click to collapse
I really don't have that directory - should I have it?
issue solved by formatting the SDcard
so I formatted mt sdcard and the managed to get into CWM.
I hava another question:
now every time I want to go into CWM I should do the same procedure?
I mean put the update.zip in the root of the sdcard->go to recovery->reinstall apps?
Alon
That's what I do leaving the update there... btw its root toolbox helps geting into recovery without the three button push also with getting rid of bloat
Sent from my SGH-T959V
going to flash...few more questions
rose2jam said:
That's what I do leaving the update there... btw its root toolbox helps geting into recovery without the three button push also with getting rid of bloat
Sent from my SGH-T959V
Click to expand...
Click to collapse
Now that I have cwm I want to replace the kernel.
I want to take Bali v2.1 extended battery from whisky -
my questions are:
1) which kernel should I take:regular\UV(what's the difference anyway)
2) what about all my apps+data/contacts/sms...? will it erase them?what backup should I do?
Im very new to development on the Sidekick. I have my phone rooted and thats it. I want to put the final smooth maximus on it. How do I go about do that??
Additional info:
As I said I only have it rooted, I dont have CWM on it or anything else.
A step by step noob friendly guide would be helpful please.
Install CWM from here ,
Put the Update.zip on your /SDCARD
Install root manager from phone , put moddedrecovery on your /SDCARD then navigate it to /SYSTEM/BIN rename Recovery.bin to Recovery.bak then move krylon's there .
Terra27 said:
Im very new to development on the Sidekick. I have my phone rooted and thats it. I want to put the final smooth maximus on it. How do I go about do that??
Additional info:
As I said I only have it rooted, I dont have CWM on it or anything else.
A step by step noob friendly guide would be helpful please.
Click to expand...
Click to collapse
I dont see a link? Also what is a good free root manager??
http://www.4shared.com/file/kdrTVrGw/Root_Manager_v195.htm
there's root manager & here's CWM
http://forum.xda-developers.com/showthread.php?t=1124453
Terra27 said:
I dont see a link? Also what is a good free root manager??
Click to expand...
Click to collapse
Now how do I put the manager on my phone?? Thank you for being so patient!
Put the .apk on your /SDCARD open file's application from your sidekick & install it
Terra27 said:
Now how do I put the manager on my phone?? Thank you for being so patient!
Click to expand...
Click to collapse
if u ever need help feel free to pm me
Sent from my SGH-T839 using XDA Premium App
Now how do I install it?? Sorry I'm confused on all this. I thought I knew that. Phone dev isn't my forte..
Terra27 said:
Now how do I install it?? Sorry I'm confused on all this. I thought I knew that. Phone dev isn't my forte..
Click to expand...
Click to collapse
Go to files , go to place where you saved the .apk and Just click on it , then a option may come up say package installer click on that then it will install.
Hope this helped you.
Sent from my SGH-T839 using Tapatalk
Okay so I got everything done and it soft bricked so I used ODIN to unbrick it and when I retry to get into CWM it always errors out now, I've redone everything I originally did and it won't go back into CWM. Why?
Sounds like you didn't replace the recovery binary correctly if it's giving a "verification failed" error.
I did though, I rooted my phone using super one click, robooted it, replaced recovery in system/bin with krios' and left the update.zip on the root and it still didnt. I dont think it really rooted though..
Terra27 said:
I did though, I rooted my phone using super one click, robooted it, replaced recovery in system/bin with krios' and left the update.zip on the root and it still didnt. I dont think it really rooted though..
Click to expand...
Click to collapse
do you have the superuser app? if not its not rooted.
I have it.
Terra27 said:
I have it.
Click to expand...
Click to collapse
okay so download the recovery file and move it to sytem/bit and overwrite the old recovery file. place the update.zip on to your sd card the volume down+power on should get you there! if its blue i think you have to press reintall packages
Try my script here, it'll place the recovery and cwm for you:
http://forum.xda-developers.com/showpost.php?p=15831175&postcount=124
So after having my phone brick twice, will someone PLEASE take the time to type a step by step noob friendly guide. Please
Define brick. Where did you have issues and what issues did you have?
Terra27 said:
So after having my phone brick twice, will someone PLEASE take the time to type a step by step noob friendly guide. Please
Click to expand...
Click to collapse
download:
http://www.krylon360.com/file_host/sk4g/recovery.zip (This is the recovery.)
http://www.krylon360.com/file_host/sk4g/update.zip (this is the update)
http://www.4shared.com/get/HpENkmN8/...rer_v2124.html (this is root explorer.)
open the first zip file (recovery file) on your computer and take out the recovery file inside it (should be the only file) and place it on the sd card.
place the second file (the update file) on the root of your sd card
and install (root explorer) the last file just like you would a normal apk file.
now open root explorer scroll down and find sdcard,
now open it and find recovery and long press on it. hit copy. now hit the back button once.
now find system. open it.
find bin. open it.
hit on the top mount r/w
hit paste and overwrite the file.
next, power down the device and instead of powering on regularly, press volume down+ power button or volume up+volume down+camera+power on you should be in the recovery mode.
if it is blue then hit re-install packages,
if it is red you should be good to go.
NOW YOU HAVE A CWM
Goodluck and have fun flashing.
tylermaciaszek said:
download:
http://www.krylon360.com/file_host/sk4g/recovery.zip (This is the recovery.)
http://www.krylon360.com/file_host/sk4g/update.zip (this is the update)
http://www.4shared.com/get/HpENkmN8/...rer_v2124.html (this is root explorer.)
open the first zip file (recovery file) on your computer and take out the recovery file inside it (should be the only file) and place it on the sd card.
place the second file (the update file) on the root of your sd card
and install (root explorer) the last file just like you would a normal apk file.
now open root explorer scroll down and find sdcard,
now open it and find recovery and long press on it. hit copy. now hit the back button once.
now find system. open it.
find bin. open it.
hit on the top mount r/w
hit paste and overwrite the file.
next, power down the device and instead of powering on regularly, press volume down+ power button or volume up+volume down+camera+power on you should be in the recovery mode.
if it is blue then hit re-install packages,
if it is red you should be good to go.
NOW YOU HAVE A CWM
Goodluck and have fun flashing.
Click to expand...
Click to collapse
okay I can get that far, but when I attempt to flash smooth mazimus on it, it will get to the tmo/sidekick/samsung screen and I'll hear a weird female robotic voice. 4 bricks, 1 with the FC vibrations, 3 with that weird voice.
Hello, been around here just haven't posted yet. Anyways, I have a S/N: B70KAS420184 pad, on the .19 firmware, no rom, successfully rooted with razorclaw and clockwork running fine. I messed up flashing the ICS file and now I cant get anywhere. Entering recovery shows a status bar then instantly to the triangle with droid guy with exclamation point. It also will not get past the main eee pad screen and just hangs there. I tried nflash and when I run the download.bat (windows) the command prompt comes up, reads a few lines real fast then closes and the nvidia usb boot recovery disappears from the device manager list. Any help would be great please I've searched for everything. Tried this on two different computers, same result. Both running windows 7. Thanks, Josh.
Exact same problem here too. Tried putting stock firmware on SD card then hopefully it would install itself but to no avail.
Suggestions?
tomar5e said:
Exact same problem here too. Tried putting stock firmware on SD card then hopefully it would install itself but to no avail.
Suggestions?
Click to expand...
Click to collapse
I've seen the problem come up but have yet to see any sort of answer.
Jwezesa said:
I've seen the problem come up but have yet to see any sort of answer.
Click to expand...
Click to collapse
As far as I understand it with other devices, you can't flash a factory update.zip if you have custom recoveries (or at least shouldn't, because it would brick the device).
Is there any way to flash a recovery like others can do with nvflash?
tomar5e said:
Is there any way to flash a recovery like others can do with nvflash?
Click to expand...
Click to collapse
If your B70 is one of the earlier batches with sbk1, you can use NVflash.
Mine is B70KAS1796**. NVflash works.
Download the latest firmware from asus ( http://www.asus.com/Eee/Eee_Pad/Eee_Pad_Transformer_TF101/#download )
unzip on computer
copy asus folder to Microsd
Copy file from /asus/update to root directory
rename updatelauncher file to EP101_SDUPDATE
reboot to recovery (power and volume down wait for words then volume up)
might help works for me (i have B70 not able to nvflash)
Sent from my Transformer TF101 using Tapatalk
Dreamboxuser said:
Download the latest firmware from asus ( http://www.asus.com/Eee/Eee_Pad/Eee_Pad_Transformer_TF101/#download )
unzip on computer
copy asus folder to Microsd
Copy file from /asus/update to root directory
rename updatelauncher file to EP101_SDUPDATE
reboot to recovery (power and volume down wait for words then volume up)
might help works for me (i have B70 not able to nvflash)
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
Unfortunatley Dreambox i have tried that but all i get is the triangle of doom. I think my recovery may be broken, and u have the later model tf101 (i think) so nvflash doesnt work for me. I install drivers for it then open download and it just flicks to a screen real quick then closes. Is that what is supposed to happen if you have the later model tf101?
thanks again.
Hmmm could be a problem with recovery but... could be a problem with the zip file.
As i am on a late model b70 as well i have been stuck a few times like that as well.
just to double check because these are the things that got me when i was stuck
did you unzip the downloaded file and copy the /asus/update/updatelauncher.... to the sd card
did you rename the file (update launcher) to EP101_SDUPDATE (this is case sensitive) and put it in the root of the SD card
Reboot to recovery volume and power down then when you see text in the top left corner press volume up?
anyone of these steps missed would cause the android with the triangle
Edit: If it boots to eee pad logo you should be able to save it. The only things that would give you the triangle would be the above and possibly wrong region code
Dude it worked, thanks heaps for that. Turns out i didnt unzip the file from the Asus website. I just assumed that was the ROM *facepalm*
Good job mate, i was nearly going to turf the tf101 and use that as an excuse to get the prime lol
No problem. Sorry about saving it tho...... Guess yer prime is gonna have to wait.
Im not seeing the update launcher file in the update folder. My update fold just has a zip file (US_epad-user8.6.5.21.zip) When I unzipped that, there are a few files and the google folder, within that folder, the only thing I have with udpate is update_binary and updater_script? Where is the updatelauncher file? Thanks
Jwezesa said:
Im not seeing the update launcher file in the update folder. My update fold just has a zip file (US_epad-user8.6.5.21.zip) When I unzipped that, there are a few files and the google folder, within that folder, the only thing I have with udpate is update_binary and updater_script? Where is the updatelauncher file? Thanks
Click to expand...
Click to collapse
Yep that is the one. Sorry wrong file name. Copy the asus/update folder So copy (US_epad-user8.6.5.21.zip) that to the root directory and rename it to EP101_SDUPDATE reboot into recovery and you should be in back in honeycomb.
So on the microsd you should have
Asus/update/ US_epad-user8.6.5.21.zip
EP101_SDUPDATE.zip
Plus all your other files
Sent from my Transformer TF101 using Tapatalk
I did this and when I boot into recovery (vol - & power them vol +) it shows the status bar like its going to install something for about 1 second then instantly to the triangle.
Did you make sure you unzipped the downloaded file.
Copied the ww.epad-user8.6.5.21 to root and renamed to EP101_SDUPDATE
These things can block you from proper recovery
Sent from my Transformer TF101 using Tapatalk
Edit: should say US instead of ww
I downloaded the zip file. Unzipped the file and I now have an ASUS folder within that is an update folder with the zip file I mentioned before. I copied the whole asus folder to the main root of a clean formated sd card. I copied the zip in the update folder and moved it to the main root of the card where the asus folder is. I renamed and ran recovery, same triangle...I am trying another sd card right now.
EDIT: With clean and new sd card it is now showing the status bar. Not sure how long this takes but good sign that it didn't go straight to the triangle! If this works I owe you a beer! Thanks so much
No problem
Have fun
Edit: It could take a while and it might stall but just be patient it should go through.
Sent from my Transformer TF101 using Tapatalk
Dreamboxuser said:
Hmmm could be a problem with recovery but... could be a problem with the zip file.
As i am on a late model b70 as well i have been stuck a few times like that as well.
just to double check because these are the things that got me when i was stuck
did you unzip the downloaded file and copy the /asus/update/updatelauncher.... to the sd card
did you rename the file (update launcher) to EP101_SDUPDATE (this is case sensitive) and put it in the root of the SD card
Reboot to recovery volume and power down then when you see text in the top left corner press volume up?
anyone of these steps missed would cause the android with the triangle
Edit: If it boots to eee pad logo you should be able to save it. The only things that would give you the triangle would be the above and possibly wrong region code
Click to expand...
Click to collapse
Works for the B60 too. Thanks for this! I knew as soon as I reflashed .21 from .19 that I had killed my recovery. I tried EVERYTHING I could think of to get it back and just didn't work. Glad I found this because I hadn't even thought about putting the EP101_SDUPDATE on the SD card.
Cheers!
So I tried to change the lcd density by editing the build.prop, but by accident i deleted it. Now my phone wont work. It only shows the galaxy s 4g screen then stays on a black screen. What do I do? Can i edit the files on the phone some other way?
http://forum.xda-developers.com/showthread.php?p=19601787
this will reset everything to normal and fix it?
Yes. Apps and all.
But i have no idea what i'm doing. When i run the java code, how do i do that?
I can't put it into download mode since it doesn't do anything but show a black screen
You can still get into download mode even if your phone does not show it. You may just need to do some more reading.
Battery pull, insert USB (should be connected to computer as well), Hold volume up+volume down, then reinsert battery while still holding volume buttons.
You should be able to get Odin or Heimdall to recognize the device.
ok i was able to get it into recovery. Now instead of doing the heimdall, can i restore a nandroid backup? Would that fix it?
mierkat09 said:
ok i was able to get it into recovery. Now instead of doing the heimdall, can i restore a nandroid backup? Would that fix it?
Click to expand...
Click to collapse
Yes also u can push the build.prop u want from cwm by doing
adb push build.prop /system/
If thats all u changed then it should work
-sent from an UNBRICKABLE force
What I recommend is :
1. Copy your desired build.prop to your SDCARD. Take it from your ROM zip.
2. Copy CWM file manager to your SDCARD. see this - http://forum.xda-developers.com/showthread.php?t=1649373
3. Get into recovery by pressing the volume down + plug the power cable in + insert the battery in.
4. Choose 'install from zip' and select the CWM file manager zip.
5. Push build.prop to /system.
Good luck!
Sent from my SGH-T959V using xda premium
I have a stock asus tf700t us model. wife was using it to play facebook games and it died. thinking it was the battery, we plugged it in and its charged but wont show the home screen, just a black slightly white blank screen. I did all the cold and other boots to no avail. so I downloaded the firmware for it and loaded it. but when its showing the progress bar, it goes 3/4 of the way and then , I think reboots itself and goes back to the slight dim screen.....I don't know what to do..thanks..
rkfguard said:
I have a stock asus tf700t us model. wife was using it to play facebook games and it died. thinking it was the battery, we plugged it in and its charged but wont show the home screen, just a black slightly white blank screen. I did all the cold and other boots to no avail. so I downloaded the firmware for it and loaded it. but when its showing the progress bar, it goes 3/4 of the way and then , I think reboots itself and goes back to the slight dim screen.....I don't know what to do..thanks..
Click to expand...
Click to collapse
Did you see any error message? It was aborted before completing the installation, sounds like.. What firmware are you on or any custom ROM? We may need more information in order to help you out...
I have a stock rom, stock firmware for the us model,,,v101611410......
update...after trying to reload the firmware, the screen goes dark with a glow in the background...cant get it to shut down or turn off..
rkfguard said:
update...after trying to reload the firmware, the screen goes dark with a glow in the background...cant get it to shut down or turn off..
Click to expand...
Click to collapse
It looks like nobody knows what is going on with your issue because you don't give us any information what you did or error messages...
Let me try to help you but I can not guarantee if you can your device up running. So please answer these questions.
1. How did you load the stock firmware and what was the error message before aborting the installation?
2. Can you still access to your bootloader by pressing the Power and Volume Down buttons at the same time for more than 10 second until you see the 3 icons of your bootloader menu?
3. Did you try to re-download the stock firmware with a right SKU for your device because it may be corrupted for the first download?
4. Do you have any important files that you like to save before proceeding?
5. Do you have an external microSD so you can put all files there for the device to read?
I need to know those answers in order to find a solution for your problem.....
I was getting an lying down android with error and exclamation, but that was because I renamed the firmware the wrong way, once I renamed it properly, it goes thru the install blue bar, then restarts 2 times and then a white screen,,nothing else...I cant shut it down..so it drains the battery and dies
rkfguard said:
I was getting an lying down android with error and exclamation, but that was because I renamed the firmware the wrong way, once I renamed it properly, it goes thru the install blue bar, then restarts 2 times and then a white screen,,nothing else...I cant shut it down..so it drains the battery and dies
Click to expand...
Click to collapse
You are indirectly answering most of my questions but you have not answered my question #4.
Do you have anything important to save on your device? Please answer that question. It looks like you don't have much options but you could get your device up and running again...
I get to the 3 icons..i choose rku....ill try the re download of firmware...
no important files....external mircrosd card...
rkfguard said:
no important files....external mircrosd card...
Click to expand...
Click to collapse
Post the link where you got the firmware file and it's exact name please (before you renamed it).
Which part of the planet do you live in?
http://support.asus.com/Download.as...er+Pad+Infinity+TF700T&p=28&s=1......firmware V10.6.1.14.10 Only for US SKU ....apple valley,ca
rkfguard said:
http://support.asus.com/Download.as...er+Pad+Infinity+TF700T&p=28&s=1......firmware V10.6.1.14.10 Only for US SKU ....apple valley,ca
Click to expand...
Click to collapse
Whew. I was afraid you may have flashed the wrong firmware, but it looks ok.
You did rename it to EP201_768_SDUPDATE.zip?
It may have been just a bad flash...
I initially thought your screen might have died, but if you can get to the bootloader menu and into RCK, it should be ok.
I would try a fresh download, unzip that file once and rename the resulting zip as stated above.
Copy it to your microSD, insert it and enter recovery (RCK) again.
do I put the .zip at the end of the rename...
rkfguard said:
do I put the .zip at the end of the rename...
Click to expand...
Click to collapse
You have to make sure that file extensions are showing in Windows Explorer. The name of the file has to be EP201_768_SDUPDATE.zip. If Windows adds file extensions automatically you might end up with EP201_768_SDUPDATE.zip.zip.
You don't want that.
I renamed it exactly as you described using the .zip at the end...windows explorer didn't add another zip to it,,and I went back to the android lying down with error....do the zip at the end made it worse
rkfguard said:
I renamed it exactly as you described using the .zip at the end...windows explorer didn't add another zip to it,,and I went back to the android lying down with error....do the zip at the end made it worse
Click to expand...
Click to collapse
How do your files show up in Windows Explorer?
Look at some Word documents or Excel files. Do they show as "Document.doc/Spreadsheet.xls" or just as "Document/Spreadsheet"?
rkfguard said:
do I put the .zip at the end of the rename...
Click to expand...
Click to collapse
If you extract the zip and don't see the .zip at the end of the extracted file, then you don't have the file extension enable on your PC.... So you don't have to put the .zip at the end of the rename, good luck...:fingers-crossed:
@berndblb
It looks like the installation was sucessed after he/she renamed the file... So his/her data may be corrupted, guessing... So the only solution that I have is to Wipe the data from bootloader menu if no one opposes this idea... I have done it at least 4 or 5 times in the past without any problem.. I hope that someone can give him/her a better advise...
in the file I have meta inf ,,,and another file named blob
rkfguard said:
in the file I have meta inf ,,,and another file named blob
Click to expand...
Click to collapse
Did you extract the zip twice?
just once if I do it twice then I see the meta and blob files...correct...can you brick a stock tablet