hello all,
first of all THANK YOU very much for this ROM - really appreciate it!!!
second of all:
I currently have a stock rom on my device - rooted.
As I understand I need to replace the stock recovery with that of krylon360(http://forum.xda-developers.com/show....php?t=1099374) and then follow the steps listed in the first post??
is the link in my post is the link to the final version of cwm for our devices??
Thank you very much for the help and sorry for the noobenst this is my first rom change
alon2 said:
hello all,
first of all THANK YOU very much for this ROM - really appreciate it!!!
second of all:
I currently have a stock rom on my device - rooted.
As I understand I need to replace the stock recovery with that of krylon360(http://forum.xda-developers.com/show....php?t=1099374) and then follow the steps listed in the first post??
is the link in my post is the link to the final version of cwm for our devices??
Thank you very much for the help and sorry for the noobenst this is my first rom change
Click to expand...
Click to collapse
your link wont load, just make sure you go to the thread that says CWM FINAL by krylon 360 and follow the steps and you will be fine
dsexton702 said:
your link wont load, just make sure you go to the thread that says CWM FINAL by krylon 360 and follow the steps and you will be fine
Click to expand...
Click to collapse
this is the link(as I see it in my broser)
what are the steps after I replaced the recovery?
is it as simple as following the steps in this thread?cause I saw people had problems...
Thank you very much for the help again
Just go to cyclopscomputers.com/gs4g
Sent from my SGH-T959V using XDA App
Use root explorer to copy/replace recovery.bin put update.zip on root of sd card, reboot into recovery.
Sent from my SGH-T959V using XDA Premium App
This is what I did and worked perfectly. But I allready had KD1 which I recomend you get. Download the recovery and update.zip and put both of them on the root of your sd card. Then get root explorer from the market. Open root explorer and go down to sdcard. In the sd card you are gonna find the recovery file you placed in there. Your long press it and its gomma say copy. Copy that and press back button and then your at the main page of root explorer again. Its gonna say paste and cancle at.the bottom but dont press anything yet. You go all the way down to system and go into it and then into /bin. In /bin your gonna press the mount r~w button at the top right which allows you to paste the file. You press paste at bottom left and its gonna ask if you want to overwrite say yes.(if it didnt ask you overwrite that either means the file you downloaded was renamed.or there was a (2) or (3) on it if you downloaded various times. Just take the ending out so its.just.recovery)
Now back out to homescreen of your phone.and if you have kd1 you can get into recovery from quickboot if not then turn off your phone and hold powerbutton and both volume keys while the phones turning on normally it will go to a bluish screen with an android.(recovery) here you click reinstall packages and your done
Sent from my SGH-T959V using XDA Premium App
sorry i have to do this... but i'm pretty sure theres more than enuff info to figure it out... noob or noobiest... didnt have to start a random thread
Moved to general.
rickyy00 said:
This is what I did and worked perfectly. But I allready had KD1 which I recomend you get. Download the recovery and update.zip and put both of them on the root of your sd card. Then get root explorer from the market. Open root explorer and go down to sdcard. In the sd card you are gonna find the recovery file you placed in there. Your long press it and its gomma say copy. Copy that and press back button and then your at the main page of root explorer again. Its gonna say paste and cancle at.the bottom but dont press anything yet. You go all the way down to system and go into it and then into /bin. In /bin your gonna press the mount r~w button at the top right which allows you to paste the file. You press paste at bottom left and its gonna ask if you want to overwrite say yes.(if it didnt ask you overwrite that either means the file you downloaded was renamed.or there was a (2) or (3) on it if you downloaded various times. Just take the ending out so its.just.recovery)
Now back out to homescreen of your phone.and if you have kd1 you can get into recovery from quickboot if not then turn off your phone and hold powerbutton and both volume keys while the phones turning on normally it will go to a bluish screen with an android.(recovery) here you click reinstall packages and your done
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
Thank you very much for the detailed explanation.
I'll try that tomorrow at work cause at home I can't get windows 7 to recognize my device
To be honest u don't need a pc and can do the whole thing from your phone with the right apps and it works flawlessly haveing roottookit and supermanger also helpful in the process
Sent from my SGH-T959V
rose2jam said:
To be honest u don't need a pc and can do the whole thing from your phone with the right apps and it works flawlessly haveing roottookit and supermanger also helpful in the process
Sent from my SGH-T959V
Click to expand...
Click to collapse
how can I do it without a PC?
downloading now supermanger , didnt find roottookit
not working...
So I did as you said(didn't use my PC by downloading stright to the phone and using root explorer)
boot into recovery using quick boot app(exclamation mark screen with little green robot)
pressed the reinstall packages
it says:
-- Applying Multi CSC
-- Installing Multi CSC
-- Install from sdcard..(in yellow)
Finding update package(in yellow)
E:Can't mount /dev/block/mmcblk0p1(in red)
(No such file or directory)(in red)
E:Can't mount SDCARD:update.zip(in red)
Installation aborted(in red)
did I do something wrong?
alon2 said:
So I did as you said(didn't use my PC by downloading stright to the phone and using root explorer)
boot into recovery using quick boot app(exclamation mark screen with little green robot)
pressed the reinstall packages
it says:
-- Install from sdcard..(in yellow)
Finding update package(in yellow)
E:Can't mount /dev/block/mmcblk0p1(in red)
(No such file or directory)(in red)
E:Can't mount SDCARD:update.zip(in red)
Installation aborted(in red)
did I do something wrong?
Click to expand...
Click to collapse
Did you move the the update.zip to the correct directory?
yep moved it to /sdcard
Sent from my SGH-T959V using XDA App
Did u add the recovery file from downloaded to system .bin folder
Sent from my SGH-T959V
rose2jam said:
Did u add the recovery file from downloaded to system .bin folder
Sent from my SGH-T959V
Click to expand...
Click to collapse
yes I did just like the tutorial said to(overwrite the original)
/dev/block/mmcblk0p1 - really doesn't exist
E:Can't mount /dev/block/mmcblk0p1(in red)
(No such file or directory)(in red)
Click to expand...
Click to collapse
I really don't have that directory - should I have it?
issue solved by formatting the SDcard
so I formatted mt sdcard and the managed to get into CWM.
I hava another question:
now every time I want to go into CWM I should do the same procedure?
I mean put the update.zip in the root of the sdcard->go to recovery->reinstall apps?
Alon
That's what I do leaving the update there... btw its root toolbox helps geting into recovery without the three button push also with getting rid of bloat
Sent from my SGH-T959V
going to flash...few more questions
rose2jam said:
That's what I do leaving the update there... btw its root toolbox helps geting into recovery without the three button push also with getting rid of bloat
Sent from my SGH-T959V
Click to expand...
Click to collapse
Now that I have cwm I want to replace the kernel.
I want to take Bali v2.1 extended battery from whisky -
my questions are:
1) which kernel should I take:regular\UV(what's the difference anyway)
2) what about all my apps+data/contacts/sms...? will it erase them?what backup should I do?
Related
OK, so after fighting with my Nexus S 4G for three hours trying to get it rooted (it took 15 - 30 minutes for my Hero and Evo Shift) I finally established root and wanted to install ClockworkMod. Of course I've come to learn that it's just not that simple, and I have to rename the default recovery, which require r/w permissions, and just more hoops to jump through.
Long story short, I rooted, set r/w access and renamed install-recovery.sh and used ROM Manager to install ClockworkMod. Reboot to recovery, and all seems well. Except that the next time I reboot, I'm back to the default recovery, my renamed install-recovery.sh.old is no where to be found and low and behold, install-recovery.sh is back.
Considering how easy this was with HTC devices... I'm starting to get a little pissed off.
Anyone have any idea why I can't maintain ClockworkMod?
Why don't you just use fastboot and flash the recovery image? It will be permanent if you do that... It takes about ten seconds.
Download the clockwork mod recovery and rename it to recovery.img then reboot your phone into the bootloader (hold volume up while you power on your phone). With the Android sdk installed and in your path, type fastboot flash recovery recovery.img and enjoy. If you want more specific help, you can pm me. I'll need to know what type of computer you have, Windows, Mac, or Linux in that case.
Sent from my Nexus S 4G using XDA Premium App
If you're sure you did the renaming properly and after that the file got restored back, I'd suggest you trying to trick the system by making a backup of the original install-recovery.sh and then instead of renaming it, just delete everything in that file so you still have the file named install-recovery.sh which will do noting to the recovery partition
radadev said:
Download the clockwork mod recovery and rename it to recovery.img then reboot your phone into the bootloader (hold volume up while you power on your phone). With the Android sdk installed and in your path, type fastboot flash recovery recovery.img and enjoy. If you want more specific help, you can pm me. I'll need to know what type of computer you have, Windows, Mac, or Linux in that case.
Sent from my Nexus S 4G using XDA Premium App
Click to expand...
Click to collapse
OK... tried this. No go.
Reboot still shows the default and not clockwork.
The file I renamed on my i9020a to prevent stock recovery from being reinstalled was in the folder \etc and was called install-recovery.bak
Cheers
So you're saying that your NS is rooted but when you boot into recovery, default recovery replaces CWM right?
1) Download 'Root Explorer' and 'ROM Manager' from the Market (Skip this step if you already have done so)
2) Reboot
3) Open 'Root Explorer' and open 'etc' directory
4) On the top right hand corner, click the 'Mount R/W' button
5) On the same directory, find 'install-recovery.sh' and rename this file to a different name (e.g. install-recovery.sh.old)
6) Open 'ROM Manager' and click 'Flash ClockworkMod Recovery.'
7) Reboot
jungbum said:
So you're saying that your NS is rooted but when you boot into recovery, default recovery replaces CWM right?
1) Download 'Root Explorer' and 'ROM Manager' from the Market (Skip this step if you already have done so)
2) Reboot
3) Open 'Root Explorer' and open 'etc' directory
4) On the top right hand corner, click the 'Mount R/W' button
5) On the same directory, find 'install-recovery.sh' and rename this file to a different name (e.g. install-recovery.sh.old)
6) Open 'ROM Manager' and click 'Flash ClockworkMod Recovery.'
7) Reboot
Click to expand...
Click to collapse
This is the first thing I tried. No dice.
Sophos1 said:
The file I renamed on my i9020a to prevent stock recovery from being reinstalled was in the folder \etc and was called install-recovery.bak
Cheers
Click to expand...
Click to collapse
I don't see an "install-recovery.bak"
Stupid question, is your bootloader still unlocked?
wild1z said:
Stupid question, is your bootloader still unlocked?
Click to expand...
Click to collapse
Yep. Still unlocked. Super-user and root programs appear to work fine. Can pull apks and push them back. I really don't know why this isn't working for me. Just thought maybe I wasn't alone.
Shadodragon said:
Yep. Still unlocked. Super-user and root programs appear to work fine. Can pull apks and push them back. I really don't know why this isn't working for me. Just thought maybe I wasn't alone.
Click to expand...
Click to collapse
Have you tried to lock it back up and return to stock? I suspect you are using the latest clockwork mod too right? I feel your pain. My Hero was a PITA to root and it had all kinds of wanky problems one day and the next.. Blue skys.
wild1z said:
Have you tried to lock it back up and return to stock? I suspect you are using the latest clockwork mod too right? I feel your pain. My Hero was a PITA to root and it had all kinds of wanky problems one day and the next.. Blue skys.
Click to expand...
Click to collapse
See, the Hero was easy for me. The Nexus seems 10 times harder to do things to.
I have noticed this, I have an:
etc\install-recovery.sh
and
system\etc\install-recovery.sh
Do I need to rename both?
Shadodragon said:
See, the Hero was easy for me. The Nexus seems 10 times harder to do things to.
I have noticed this, I have an:
etc\install-recovery.sh
and
system\etc\install-recovery.sh
Do I need to rename both?
Click to expand...
Click to collapse
I can only tell you what I would do. I would try to get it back to stock and lock it up to start over.
Maybe JasonMahoney, AOSP and Lilduce will come on over and share this fun with us.
Im very new to development on the Sidekick. I have my phone rooted and thats it. I want to put the final smooth maximus on it. How do I go about do that??
Additional info:
As I said I only have it rooted, I dont have CWM on it or anything else.
A step by step noob friendly guide would be helpful please.
Install CWM from here ,
Put the Update.zip on your /SDCARD
Install root manager from phone , put moddedrecovery on your /SDCARD then navigate it to /SYSTEM/BIN rename Recovery.bin to Recovery.bak then move krylon's there .
Terra27 said:
Im very new to development on the Sidekick. I have my phone rooted and thats it. I want to put the final smooth maximus on it. How do I go about do that??
Additional info:
As I said I only have it rooted, I dont have CWM on it or anything else.
A step by step noob friendly guide would be helpful please.
Click to expand...
Click to collapse
I dont see a link? Also what is a good free root manager??
http://www.4shared.com/file/kdrTVrGw/Root_Manager_v195.htm
there's root manager & here's CWM
http://forum.xda-developers.com/showthread.php?t=1124453
Terra27 said:
I dont see a link? Also what is a good free root manager??
Click to expand...
Click to collapse
Now how do I put the manager on my phone?? Thank you for being so patient!
Put the .apk on your /SDCARD open file's application from your sidekick & install it
Terra27 said:
Now how do I put the manager on my phone?? Thank you for being so patient!
Click to expand...
Click to collapse
if u ever need help feel free to pm me
Sent from my SGH-T839 using XDA Premium App
Now how do I install it?? Sorry I'm confused on all this. I thought I knew that. Phone dev isn't my forte..
Terra27 said:
Now how do I install it?? Sorry I'm confused on all this. I thought I knew that. Phone dev isn't my forte..
Click to expand...
Click to collapse
Go to files , go to place where you saved the .apk and Just click on it , then a option may come up say package installer click on that then it will install.
Hope this helped you.
Sent from my SGH-T839 using Tapatalk
Okay so I got everything done and it soft bricked so I used ODIN to unbrick it and when I retry to get into CWM it always errors out now, I've redone everything I originally did and it won't go back into CWM. Why?
Sounds like you didn't replace the recovery binary correctly if it's giving a "verification failed" error.
I did though, I rooted my phone using super one click, robooted it, replaced recovery in system/bin with krios' and left the update.zip on the root and it still didnt. I dont think it really rooted though..
Terra27 said:
I did though, I rooted my phone using super one click, robooted it, replaced recovery in system/bin with krios' and left the update.zip on the root and it still didnt. I dont think it really rooted though..
Click to expand...
Click to collapse
do you have the superuser app? if not its not rooted.
I have it.
Terra27 said:
I have it.
Click to expand...
Click to collapse
okay so download the recovery file and move it to sytem/bit and overwrite the old recovery file. place the update.zip on to your sd card the volume down+power on should get you there! if its blue i think you have to press reintall packages
Try my script here, it'll place the recovery and cwm for you:
http://forum.xda-developers.com/showpost.php?p=15831175&postcount=124
So after having my phone brick twice, will someone PLEASE take the time to type a step by step noob friendly guide. Please
Define brick. Where did you have issues and what issues did you have?
Terra27 said:
So after having my phone brick twice, will someone PLEASE take the time to type a step by step noob friendly guide. Please
Click to expand...
Click to collapse
download:
http://www.krylon360.com/file_host/sk4g/recovery.zip (This is the recovery.)
http://www.krylon360.com/file_host/sk4g/update.zip (this is the update)
http://www.4shared.com/get/HpENkmN8/...rer_v2124.html (this is root explorer.)
open the first zip file (recovery file) on your computer and take out the recovery file inside it (should be the only file) and place it on the sd card.
place the second file (the update file) on the root of your sd card
and install (root explorer) the last file just like you would a normal apk file.
now open root explorer scroll down and find sdcard,
now open it and find recovery and long press on it. hit copy. now hit the back button once.
now find system. open it.
find bin. open it.
hit on the top mount r/w
hit paste and overwrite the file.
next, power down the device and instead of powering on regularly, press volume down+ power button or volume up+volume down+camera+power on you should be in the recovery mode.
if it is blue then hit re-install packages,
if it is red you should be good to go.
NOW YOU HAVE A CWM
Goodluck and have fun flashing.
tylermaciaszek said:
download:
http://www.krylon360.com/file_host/sk4g/recovery.zip (This is the recovery.)
http://www.krylon360.com/file_host/sk4g/update.zip (this is the update)
http://www.4shared.com/get/HpENkmN8/...rer_v2124.html (this is root explorer.)
open the first zip file (recovery file) on your computer and take out the recovery file inside it (should be the only file) and place it on the sd card.
place the second file (the update file) on the root of your sd card
and install (root explorer) the last file just like you would a normal apk file.
now open root explorer scroll down and find sdcard,
now open it and find recovery and long press on it. hit copy. now hit the back button once.
now find system. open it.
find bin. open it.
hit on the top mount r/w
hit paste and overwrite the file.
next, power down the device and instead of powering on regularly, press volume down+ power button or volume up+volume down+camera+power on you should be in the recovery mode.
if it is blue then hit re-install packages,
if it is red you should be good to go.
NOW YOU HAVE A CWM
Goodluck and have fun flashing.
Click to expand...
Click to collapse
okay I can get that far, but when I attempt to flash smooth mazimus on it, it will get to the tmo/sidekick/samsung screen and I'll hear a weird female robotic voice. 4 bricks, 1 with the FC vibrations, 3 with that weird voice.
I have downloaded all the files given in brian folder. I copied nandroid folderto my sdcard & then using open recivery i rebooted in recovery mode but nowhere i got an option to install nandroid files. Can some1 help me
Nandroid >> Restore
Don't forgot to make a nandroid backup before in case of you want to go back to stock without flashing a sbf.
i m not getting u to restore nandroid i shld get option to select it i dont get tht option
It sounds like you may be in stock recovery. We have to use a bootstrapped recovery called openrecovery. After you have installed openrecovery you get to it by holding the volume up key during a normal boot.
Sent from my Milestone XT720 using xda premium
Confused so explaining so tht u can catch where i m dng a mistake
Using cincinnati bells instruction i updated to 2.2. Now my phone is fresh & new,just installed few games thts it, then i find BRAVO 2.2 & i want to use tht. So following his instruction i download open recovery & copy paste it in my sdcard & even the nandroid folder to my sd card & i find somewhere the apk file of open recovery & install it. Now by pressing volume up button i restart my phone & I get an yellow exclamation mark with a triangle the i press camera key + volume up button then this is where i reach & get the error (image) I have attached the image
For some reason your sdcard is not being mounted. I would check it out on a PC in a card reader.
3rdstring said:
For some reason your sdcard is not being mounted. I would check it out on a PC in a card reader.
Click to expand...
Click to collapse
so wht shld i do??? is der a problem with my sd card????
Reading your post, I think there is a step that was missed. Did you extract the openrecovery.zip? The extracted contents are what is in this folder sdcard/openrecovery.
Do you have this set up on your SD card?
Sdcard/openrecovery.zip
sdcard/openrecovery
sdcard/nandroid/openrecovery/<your ROM you want to restore>
**No spaces between**
Go to this thread and download and unzip this recovery (http://forum.xda-developers.com/show....php?t=1242259) This is what we are all using now b/c of the customization that MZ put into it. Follow the directions.
Yes yes yes yes!!! U were right i missed tht step i got it working Thank u thank u
interesting...
Here is one more problem. I have installed this rom now after installation of this ROM i m getting an Error PLMN failed.
Check you APNs but IIRC the PLMN error didn't really matter. I saw it on Hellmonger's ROM. Might want to ask Linertymonger, I think he had a fix for that.
After searching on this forum for a few hours, I am still unable to figure out what is wrong with my phone.
On my Galaxy S 4G, I have rooted it, and then I proceeded to the flashing guide here, http://forum.xda-developers.com/showthread.php?t=1122508
But after I install CWM, I am unable to install a custom ROM. I am able to get to the Red CWM, but when I try to backup my current ROM, or install from SD card, it says that it cannot mount E:/blah blah blah
How should I fix this error?
I tried going to Mounts and Storage in CWM, and the sdcard is "mount".
I am really confused, so if anyone can help me, I would greatly appreciate it
That blah blah blah its actually important. What can't mount? If sd is mounted, then it should say "unmount"...
Sent from my SGH-T959V using xda premium
jager555 said:
That blah blah blah its actually important. What can't mount? If sd is mounted, then it should say "unmount"...
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
Ok, so it's the red "CwM Voodoo Lagfix Recovery v3.0.2.8x"
I go down to install zip from sdcard > Choose zip from sdcard > Select blackice_voodoo.zip
Then, it says on the bottom in white words
"CwM Voodoo Lagfix Recovery v3.0.2.8x
--Installing: /sdcard/BlackIce_Voodoo.zip
Finding update package...
E:Can't mount /sdcard/BlackIce_Voodoo.zip
Installation aborted"
Now, when I tried to use the Backup function, it tells me
"Can't mount /sdcard"
I went to Mounts and Storage menu, and selected the "-mount /sdcard" and it gave me "Error mounting /sdcard!"
Is there any more information you need to help me?
in CWM are your mounts Unmounted mounted mounted unmounted in that order?
What firmware is currently on there? the tmobile GB kj6 or the original Froyo?
scoop_dtx said:
in CWM are your mounts Unmounted mounted mounted unmounted in that order?
What firmware is currently on there? the tmobile GB kj6 or the original Froyo?
Click to expand...
Click to collapse
Right now, my CWM mounts are as listed:
-Unmount /cache
-mount /data
-mount /sdcard
-unmount /system
So yes, it is in that order. I read something about
Code:
A) For KD1 and Bionix Frost your mounts must appear like this:
/cache : unmount
/data : mount
/sdcard : mount
/system : unmount
B) For Trigger your mounts must appear like this:
/cache : unmount
/data : unmount
/sdcard : mount
/system : unmount
I got this on Ebay and I had no clue what the seller did to it, but I think it's the original Froyo.
Firmware: 2.2.1
Kernel version: 2.6.32.9
Build number: FROYO.VUVKD1
So you are on 2.2. I would back up the sd card. Then format it by plugging it directly into the computer, formatting. then putting it back into the phone boot into cwm. Formatting it again. Placing the files you want on the root. Trying again. let me know
Sent from my SGH-T959V using xda premium
jager555 said:
So you are on 2.2. I would back up the sd card. Then format it by plugging it directly into the computer, formatting. then putting it back into the phone boot into cwm. Formatting it again. Placing the files you want on the root. Trying again. let me know
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
Oh, after I got CWM working, I went into the Rommanager app, and flashed from SD card, and I chose BlackIce_Voodoo.rar and it got stuck on the "Galaxy S exclusively for T-mobile" screen. I understand that after flashing a rom, it takes around 10 mins on that screen, but I have waited overnight, and it still has not booted. Now, I can't even boot into CWM anymore. How should I handle this situation? The whole phone is bricked, and CWM is not accessible anymore.
I also tried turning it off, holding volume up & down, and plugging the wire in to enter download mode, but it failed to do that. So I guess I can't use odin either.
Please, Don't use ROM Manager on this phone.
I'm not sure how to solve this if it can boot to the splashscreen but not get to download mode.
Sent from my SGH-T959V using XDA App
vgcraze said:
Please, Don't use ROM Manager on this phone.
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
Thanks, I didn't know that from before Since I already did it, how can I "undo" the effects of Rom Manager? I already put the new Update.zip into the root of my SD card. But I am unable to reinstall packages using CWM because I can't access it .
Try using plugging it in and look at Odin again. I heard it can recognize devices sometimes even if the screen is blank.
Edit: If you get your phone up and running again, use the Gingerbread Starter Pack guide to flash a GB ROM without any problems.
Sent from my SGH-T959V using XDA App
vgcraze said:
Try using plugging it in and look at Odin again. I heard it can recognize devices sometimes even if the screen is blank.
Edit: If you get your phone up and running again, use the Gingerbread Starter Pack guide to flash a GB ROM without any problems.
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
I opened Odin, and plugged it in, but nothing happened.
By the way, the screen is at the "Samsung Galaxy S Exclusively for Tmobile, Samsung" screen. It isn't blank.
hyudryu said:
I opened Odin, and plugged it in, but nothing happened.
By the way, the screen is at the "Samsung Galaxy S Exclusively for Tmobile, Samsung" screen. It isn't blank.
Click to expand...
Click to collapse
Try downloading the Android SDK, install it, when you run it the first time, only download the platfoem tools. Once that's installed, open a command prompt, CD to where the platform-tools directory is located.(prob C:\Program Files\Android\Android-sdk\platform-tools or C:\Program Files (x86)\Android\Android-sdk\platform-tools) and type:
Adb reboot download
Or
Adb reboot recovery
For download mode & recovery mode, respectively.
Sent from my SGH-T959V using XDA App
hyudryu said:
I opened Odin, and plugged it in, but nothing happened.
By the way, the screen is at the "Samsung Galaxy S Exclusively for Tmobile, Samsung" screen. It isn't blank.
Click to expand...
Click to collapse
You should search the forum. Note the sticky threads at the top of each forum.
Also search and checkout the General and Dev forums.
You have to be in "Download Mode" to use Odin/Heimdall.
bhundven said:
You should search the forum. Note the sticky threads at the top of each forum.
Also search and checkout the General and Dev forums.
You have to be in "Download Mode" to use Odin/Heimdall.
Click to expand...
Click to collapse
In my first post, I already mentioned I searched for hours. I have saw the Odin guide post, and followed it and got no results. That is why I posted a question. I posted AFTER I spent hours searching on the forums. Not before...
And yes I know I have to be in download mode, but I couldn't get to download mode,
hyudryu said:
I also tried turning it off, holding volume up & down, and plugging the wire in to enter download mode, but it failed to do that. So I guess I can't use odin either.
Click to expand...
Click to collapse
Edit: I used the command and managed to restore it back to stock ROM. How can I flash the Bionix Frost ROM or Black Ice?
hyudryu said:
In my first post, I already mentioned I searched for hours. I have saw the Odin guide post, and followed it and got no results. That is why I posted a question. I posted AFTER I spent hours searching on the forums. Not before...
Click to expand...
Click to collapse
Sorry, not trying to be a jerk, but this thread is posted in Q&A and moved to Q&A from General at least 3 times a week. You 'say' you searched, but had you 'really' searched, you would have found those threads too.
hyudryu said:
And yes I know I have to be in download mode, but I couldn't get to download mode
Click to expand...
Click to collapse
I hope the android sdk 'adb reboot download' helps you with your download mode issue.
bhundven said:
Sorry, not trying to be a jerk, but this thread is posted in Q&A and moved to Q&A from General at least 3 times a week. You 'say' you searched, but had you 'really' searched, you would have found those threads too.
I hope the android sdk 'adb reboot download' helps you with your download mode issue.
Click to expand...
Click to collapse
I found all of them from the flashing guide, to CWM guide, to rooting guide. But the Odin guide only teaches me how to flash a ".tar" file, not a .rar file.
hyudryu said:
I found all of them from the flashing guide, to CWM guide, to rooting guide. But the Odin guide only teaches me how to flash a ".tar" file, not a .rar file.
Click to expand...
Click to collapse
AH! Well, you don't flash the rar file!
You unzip it and flash it's contents
Some rom modders use rar, others use 7zip (because they usually have limited space to store their mods, compress it good!)
I dislike Odin, as it is proprietary and has no support and few updates.
I prefer Heimdall, as it is free, has support, and updates often.
Hope that helps.
bhundven said:
AH! Well, you don't flash the rar file!
You unzip it and flash it's contents
Some rom modders use rar, others use 7zip (because they usually have limited space to store their mods, compress it good!)
I dislike Odin, as it is proprietary and has no support and few updates.
I prefer Heimdall, as it is free, has support, and updates often.
Hope that helps.
Click to expand...
Click to collapse
I unzipped it and its a bunch of files inside folders :\ Theres the data folder, META-INF, scripts, system, tools, updates, permissions. How do I flash folders?
I got Heimdall, but I am still unable to add the BlackIce_Voodoo.rar in.
It says "Tar header contained an invalid file size."
Edit: I just read about there being an "Audiophile" ROM for the T959V. Since I care about my music quality, I decided to get that.
I downloaded a zip called "redux 1.3.2.zip" from this thread http://forum.xda-developers.com/showthread.php?t=1195878&highlight=Audiophile
And I am clueless to how to flash a zip file :\
I tried extracting the files, and I am still clueless to how to flash those files/folders.
hyudryu said:
I unzipped it and its a bunch of files inside folders :\ Theres the data folder, META-INF, scripts, system, tools, updates, permissions. How do I flash folders?
I got Heimdall, but I am still unable to add the BlackIce_Voodoo.rar in.
It says "Tar header contained an invalid file size."
Edit: I just read about there being an "Audiophile" ROM for the T959V. Since I care about my music quality, I decided to get that.
I downloaded a zip called "redux 1.3.2.zip" from this thread http://forum.xda-developers.com/showthread.php?t=1195878&highlight=Audiophile
And I am clueless to how to flash a zip file :\
I tried extracting the files, and I am still clueless to how to flash those files/folders.
Click to expand...
Click to collapse
Your UNrar program... Guessing winrar, unrar'd the rar file and contained a zip file, that you thought was a folder.
You flash that zip file from cwm.
Sent from my SGH-T959V using xda premium
hyudryu said:
I unzipped it and its a bunch of files inside folders :\ Theres the data folder, META-INF, scripts, system, tools, updates, permissions. How do I flash folders?
I got Heimdall, but I am still unable to add the BlackIce_Voodoo.rar in.
It says "Tar header contained an invalid file size."
Edit: I just read about there being an "Audiophile" ROM for the T959V. Since I care about my music quality, I decided to get that.
I downloaded a zip called "redux 1.3.2.zip" from this thread http://forum.xda-developers.com/showthread.php?t=1195878&highlight=Audiophile
And I am clueless to how to flash a zip file :\
I tried extracting the files, and I am still clueless to how to flash those files/folders.
Click to expand...
Click to collapse
Also, these roms you are mentioning are froyo roms. Just fyi, unless that is what you want.
Sent from my SGH-T959V using xda premium
Does anyone know how to flash it step by step
Sent from my LG-P925 using xda app-developers app
lazylu said:
Does anyone know how to flash it step by step
Sent from my LG-P925 using xda app-developers app
Click to expand...
Click to collapse
Assuming you already have gingerbread installed, you are rooted, your phone connected with PC and usb debugging enabled.
Step 1
Donwload
recovery.img from http://www.wuala.com/caroceiro/optimus 3d/roms/acura/Acura3DMAX V2/?lang=en
Download
Clockwork Touch.rar from http://d-h.st/zdj
extract Clockwork Touch.rar
run LGP920_CWM_5.8.1.5_Flasher_WinXP.exe BUT DO NOT PRESS SPACEBAR YET
copy recovery.img from your downloaded files and paste it into same directory with LGP920_CWM_5.8.1.5_Flasher_WinXP.exe and overwrite old recovery.img
Now press spacebar in the dos box and let it flash
Step 2
Copy Acura3DMAX_V2.zip in your internal sdcard.
Reboot into touch recovery
go to mounts
Format DATA
Format SYSTEM
Format CACHE
Step 3
Install from internalsd Acura3DMAX_V2.zip
THATS IT
If you followed this guide its flashed now you should reboot and wait for startup guide.
Thxs
Sent from my LG-P925 using xda app-developers app
do we still need to do the STEP 1 even if we already have the CWM Touch?
JastaPein said:
do we still need to do the STEP 1 even if we already have the CWM Touch?
Click to expand...
Click to collapse
i think acurra did some changes to cwm touch so maybe it's better to do it that way.
i did it like i describe above.
dont be lazy
xbsall said:
i think acurra did some changes to cwm touch so maybe it's better to do it that way.
i did it like i describe above.
dont be lazy
Click to expand...
Click to collapse
thanks man
this guy *LINK* successfully flashed it without doing the one that you posted.. . check his post
http://forum.xda-developers.com/showpost.php?p=27926815&postcount=6
nice so you can skip that part..
xbsall said:
nice so you can skip that part..
Click to expand...
Click to collapse
does it need to be in internal sd
usually no .
but you can try it with your external sd and tell us.
i flashed it from my internal sd
---------- Post added at 02:13 AM ---------- Previous post was at 02:12 AM ----------
more info here
http://www.htcspain.com/roms-lg-optimus-3d-384/rom-ginger-acurateam-v2-51172/
xbsall said:
usually no .
but you can try it with your external sd and tell us.
i flashed it from my internal sd
---------- Post added at 02:13 AM ---------- Previous post was at 02:12 AM ----------
more info here
http://www.htcspain.com/roms-lg-optimus-3d-384/rom-ginger-acurateam-v2-51172/
Click to expand...
Click to collapse
i did of internal sd says cant open /emmec/Acura3DMAX_V2.zip (bad)
probably corrupted zip.. copy it again and retry if it still doesnt work download it again
xbsall said:
probably corrupted zip.. copy it again and retry if it still doesnt work download it again
Click to expand...
Click to collapse
well it wont boot stuck on lg screen so how will i put on sd after d/l?
restore your backup
if you dont have a backup try this
get into cwm
mount emmc
run LGP920_CWM_5.8.1.5_Flasher_WinXP.exe that you downloaded earlier
but dont press spacebar
look into the directory of LGP920_CWM_5.8.1.5_Flasher_WinXP.exe and there should be a file called adb-win.exe
open a command prompt and drag an drop adb-win.exe into it put a space and type push and then drag and drop Acura3DMAX_V2.zip leave a space and type /emmc/
it should look like this (although it depends on your directory structure)
"D:\LG Optimus3D\Clockwork Touch\adb-win.exe" push D:\downloads\Acura3DMAX_V2.zip /emmc/
or you could try installing it from your external sdcard
xbsall said:
restore your backup
if you dont have a backup try this
get into cwm
mount emmc
run LGP920_CWM_5.8.1.5_Flasher_WinXP.exe that you downloaded earlier
but dont press spacebar
look into the directory of LGP920_CWM_5.8.1.5_Flasher_WinXP.exe and there should be a file called adb-win.exe
open a command prompt and drag an drop adb-win.exe into it put a space and type push and then drag and drop Acura3DMAX_V2.zip leave a space and type /emmc/
it should look like this (although it depends on your directory structure)
"D:\LG Optimus3D\Clockwork Touch\adb-win.exe" push D:\downloads\Acura3DMAX_V2.zip /emmc/
or you could try installing it from your external sdcard
Click to expand...
Click to collapse
will this mean i will have to do everything again?
no this will copy rom file into your internalsd and you will install zip file from sdcard
Well it works thanks but my call app is gone
Sent from my LG-P925 using XDA
Contact gone also
Sent from my LG-P925 using XDA
Im back to stock things kept crashing
Sent from my LG-P925 using XDA
I hope everyone is hitting that "thanks" button for xbsall
So if I'm following correctly, we DO need to flash the recovery image or we DO NOT need to?
If this is just a rom then this is simple flashing with no extra steps but there has to be a reason for the recovery...