[Q] Samsung Galaxy 5 ROM problem - Android Software/Hacking General [Developers Only]

hi,
I have samsung galaxy 5 with eclair. my problem is 2 days before i tried to flash rom to 2.3. but it was stucked in between after system.rfs download. so i removed battery and tried to install 2.1 again. but this time phone was not getting stated. it is also not getting rooted (volDown+center+poweron/off). phone is not at all starting. what should i do ... i have installed froyo and 2.3 cyanogen mod before... but this time phone doesn't even starting .... please help me out...

Get an official rom of your country rom samfirmware.com and flash it using Odin. Then try to install cyanogen from madteam.
Installing the official firmware will reformat ur system and data partition and may solve all your problems.
Sent from my X8 using Tapatalk

Related

samsung GT s5570 Bricked

Hi Everyone,
Please help me on this as my sansung GT s5570 phone is got stuck in the samsung logo when I tried to flash CRM with odin. I am trying this first time and got my phone bricked.
I can start the download mode in the mobile.
Flashing CRM went correctly. But when tried to login to CRM it got stuck. And cannot do anything in my phone
It is not bricked, flash stock 2.3.4 with odin.
I installed again and now I can work with my phone. But I am not able to boot into crm. When I flashed crm odin showed pass. Do I need to flash another ROM to reboot into CRM
Sent from my GT-S5570 using XDA App
what is CRS? Did you mean CWM?
sorry for the mistake I mean cwm only.
I Don't have any Stock ROM with me. And CWM is not working with the current android version in my phone (2.2.1).Do I need to install 2.3 for booting into CWM? Where I can Get this stock ROM?
Download custom 2.3.4 from samfirmware.com and flash it with odin, then when you have gingerbread, flash CWM.

[Q] PLEASE help me..ODIN shows this error while flashing a stock rom on my galaxy fit

PLEASE help me....ODIN shows this error while flashing a stock rom on my galaxy fit...
i used beni 1.0 ops
and
odin multidownloader v4.38
and
gingerbread 2.3.6 XXKPP
i have samsung usb drivers installed on my pc...
i m using Cyanmobile initial a on my cell...
and..
cwm 5....
for error look in the photo....
i think u need to redownload the rom and is it one package or 4 files ?
Yeah, you'll have to download the rom again. It seems that it is corrupted. Download it once again and then try.
flash 2.3.4 full package 1st
download the full package first that is ginger bread 2.3.4 and flash it via odin..
then u can upgrade to 2.3.6 by using onepackage files..

[Q] Galaxy y duos is not able to reboot after flashing GingerIceJelly v2 custom ROM

I had Android 2.3.6 stock Samsung ROM on my Galaxy Y duos (GT-S6102). I've flashed the "update.zip" from this thread: ( http://forum.xda-developers.com/showthread.php?t=1611830 ) and then flashed CWM (CWM-6102.zip) from the same thread. After that i flashed GingerIceJelly v2.0.RC2 ROM from this thread: (http://forum.xda-developers.com/showthread.php?t=2047795) successfully but the device is not able to reboot!! I waited an hour and it still isn't. I tried to remove the battery, insert it and restart the device or going to Recovery again but it didn't work. Then i tried to flash the official stock 2.3.6 firmware via Odin and the process fails every time. The checked the ROM again and it is 100% for my device, so why is that happening. It's not my first time flashing ROMs i've been doing it for over a year on my GS2 on my Note 3 and on my S3.
Any help? Thanks in advance

[Q] Help! Huawei U8800 Bootlooping on 2.3.5 Official Rom after many attempts to fix

Hey guys, I Know this phone is old but please help me
I was using official 2.3.5 ROM and it was getting old so I thought to root and install an ICS Rom so i rooted and installed MIUi ICS ROM (http://forum.xda-developers.com/showthread.php?t=2029969) it was really nice and i thought to install Aurora Rom(http://forum.xda-developers.com/showthread.php?t=1492957) and it was Awsome! so i got into installing new ROMs and i was installing new ROMs almost every week and one day i saw CM 11 KitKat ROM for Huawei U8800 and I wanted to install it but before that i had to install Ble-Part Partition (http://forum.xda-developers.com/showthread.php?t=2615712) i flashed it succesfully and i installed the 2.2 version after that i flashed CWM 6.0.4.6 and i installed KitKat CM11 without any problems!
After some time using it for some time i thought to go back to Aurora as CM 11 was a little buggy and Aurora was the most stable ROM but as i was installing Aurora, i accidently formatted Boot instead of formatting System and without realizing it i flashe Aurora which flashed very quickly rather unexpectedely, and when i rebooted a blue screen appeared. I (surprised) installed official 2.3.5 ROM via dload and when it had installed the phone went into bootloop and i performed a factory data reset and it booted normally. But when i rebooted the phone again again it went to bootloop again. So i installed official 2.2 ROM and it installed succesfully and it never bootlooped in 2.2 ROM. But i wanted to install Aurora but it needs a .35 kernel and whenever i install 2.3.5 it keeps on bootlooping and i cant root it, though i can root 2.2 ROM easily and install .32 ROMs but they are quite old and I want to install ICS, JellyBean or KitKat Rom, which unfortunately i cant
Just in case you would be wondering i have tried many methods to go back to stock partition and none of them works and i have 1.8 GB storage! I have read that distorted partition can cause bootloops on 2.3.5 ROM so if anyone can help me to fix this problem, ill be very grateful as this is a very important phone to me!
And if you have any questions please ask!

[Completed] Unbricking Galaxy S2

Hey XDA Devs,
I have an old S2 on which I was trying to downgrade Android from CM12.1 to CM11.
CM12.1 had somehow installed it's own recovery console; using which I couldn't have flashed CM11, so for installing CM11 I tried to flash "CWM-KitKatCompatible-i9100" using ODIN 1.85.
The flash completed successfully but then my phone died. It doesn't even get into download mode or recovery mode anymore.
Also, while installing CWM, I flashed the PIT file "omap4_all_20110627_emmc.pit" as it was instructed on http://forum.xda-developers.com/galaxy-s2/general/how-to-root-install-cwm-recovery-flash-t1814801.
Is there any way to revive my phone?
I've already tried jig, even that doesn't work.
I need to get some data from my phone. Even if that's possible somehow?
Thanks,
- V
Hello Dear ,
If ur device get to booted to downloading mode i suggest u to flash stock rom with factory fw through odin here is 2 link for that rom
4.0.3
http://www.mediafire.com/download/etttzxwacsv3dg8/Galaxy+S2+i9100+Full+Factory+Rom+4.0.3.docx
4.1.2
https://mega.nz/#!LEF1AYqB!lMr2S90aZY_MChswC2pLdX4Zva11K6WVG9_WA8yNdNg
For how to flash it here some screenshots ,
https://www.google.com/search?q=how...ved=0ahUKEwj1696-mb_JAhWENxQKHVkTAb0Q_AUICCgE
Last chance for u if this not working for u then only one way 100% it's should work its via box like z3x box on any service center near u ok ..
Hope this will help You,
Thank You ,

Categories

Resources