Charger Cable Melted?? - Eee Pad Transformer Q&A, Help & Troubleshooting

The other day my Transformer USB cable randomly melted. I kept smelling burning electronics/plastic in my room and was at first investigating a DVR that has been giving me issues, then when I sat back down burnt my leg pretty good on the USB cable
It was the end that plugs into the tablet that completely melted, but the USB plug end that goes to the wall was quite hot as well.
I plugged my brother in law's Galaxy Tab 10.1 and it indicated charging, but had a red X or something saying that it wasn't actually charging. Is that because the Tab uses different voltages or definitely that it's junk? I have a Fluke 87V volt meter, anyone know how I can test my USB wall wart to see if it will work if I just replace the cable? I'm nervous to get a new cable only and it get melted, but I can't really afford both halves.
Any recalls for this? The cable was in perfect condition.

just posting

I think you need a 12volt connect. The cable could have went bad. But I bet it's the charger part...they ain't cheap.

I really wish it worked with the MILLION smart phone ones I've got laying around
I know the cable is $19.99 for a 5 foot on ASUS, I'm scared to check the 12 Volt

$29.99 From ASUS with 5' Cable, not too bad
http://us.estore.asus.com/index.php?l=product_detail&p=4117

Some transformers were sold with faulty adapters...
Contact Asus for a warranty replacement.
And be angry about it on the phone as it could have caused a fire etc.

Hrm... I bought it from a friend, but perhaps he still had warranty and would help me out . I can look into that route

Related

[Q] Wall Charger dead after plugging in USB 3.0 cable

A word of warning - I received my USB 3.0 extension cable from Amazon yesterday, plugged it in when I got home and it started to charge. I noticed after a few minutes that the charge icon had disappeared and now the charger does not seem to work at all; tried both dock and tablet sockets.
This was the cable recommended from the other thread on the forum about charging the device.
http://www.amazon.co.uk/gp/product/B003QZKMU4/ref=oss_product
I'm fairly sure that it is the UK three pin socket part that has died as the machine is picked up by my PC over the USB cable. I've tried the usual taking the thing apart and re-clipping it back together, I've even checked the teeth on the cable to make sure nothing is damaged, still no joy.
I've emailed Asus support but after reading through the forum I'm not overly positive that they will be any help at all. I suppose I'll have to wait for the Chinese/Hong Kong factories to start kicking these out on Ebay as there doesn't seem anything in the UK at the moment. So I'll sit here and watch my 90% battery slowly die and the machine get covered in dust.
Why don't you get a cheap ipad charger in the meantime. Takes longer but do the charging overnight?
Thanks for the tip. Is the propriety charger the same or do you just mean the USB wall plug end?
dainesefreak said:
A word of warning - I received my USB 3.0 extension cable from Amazon yesterday, plugged it in when I got home and it started to charge. I noticed after a few minutes that the charge icon had disappeared and now the charger does not seem to work at all; tried both dock and tablet sockets.
This was the cable recommended from the other thread on the forum about charging the device.
http://www.amazon.co.uk/gp/product/B003QZKMU4/ref=oss_product
I'm fairly sure that it is the UK three pin socket part that has died as the machine is picked up by my PC over the USB cable. I've tried the usual taking the thing apart and re-clipping it back together, I've even checked the teeth on the cable to make sure nothing is damaged, still no joy.
I've emailed Asus support but after reading through the forum I'm not overly positive that they will be any help at all. I suppose I'll have to wait for the Chinese/Hong Kong factories to start kicking these out on Ebay as there doesn't seem anything in the UK at the moment. So I'll sit here and watch my 90% battery slowly die and the machine get covered in dust.
Click to expand...
Click to collapse
My PSU died, and after a week of back and forth to ASUS service they have declared my TF DOA and told Comet to replace it.
They are doing a doorstep swap tomorrow for me.
I have also posted about PSU's with a known fault, look in the accessories forum
I had the same issue. For me i fixed my PSU by unplugging everything for 20 minutes. Sounds silly but it works. Unplug from the wall socket, take the usb out of the PSU and the TF and leave it al alone for 20 minutes.
bbilko said:
My PSU died, and after a week of back and forth to ASUS service they have declared my TF DOA and told Comet to replace it.
They are doing a doorstep swap tomorrow for me.
I have also posted about PSU's with a known fault, look in the accessories forum
Click to expand...
Click to collapse
I checked my serial number a few days ago and it was supposed to be one of the ok ones.
I also took the thing to pieces as much as I could without resorting to a screwdriver. It's been left out over night and put back together a few times.
The whole thing doesn't look to be the best put together electrical item I've seen. In fact my Desire charger makes it look like some 5p Chinese shonk, oh err hang on a minute it is.
Just looking at iPad chargers now.
Same thing with me and extension off ebay one day after I got it. What I had to do was a factory reset to get it to show the charge icon. Now it's been fine since going on 2 weeks now.
dazzawright said:
I had the same issue. For me i fixed my PSU by unplugging everything for 20 minutes. Sounds silly but it works. Unplug from the wall socket, take the usb out of the PSU and the TF and leave it al alone for 20 minutes.
Click to expand...
Click to collapse
I did that too, but it didn't work for mine, so i tapped it on my desk and voila, it works fine now.....dunno how long it'll last though
Sent from my Transformer TF101 using Tapatalk
lacrossev said:
I did that too, but it didn't work for mine, so i tapped it on my desk and voila, it works fine now.....dunno how long it'll last though
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
Funny you should say that, I was all about to give up and then gave it the tap of life on the window ledge and it started working again. The annoying part was that I'd moved it from the usual changing point to test it out so I have had to very gingerly move it back.
It's still working but I'm not sure how long it will last. I think that maybe the USB lead must have move something out, which is odd as it was a really loose light connection. The upshot is the charger is now going to be left untouched and the USB 3.0 lead is going in the bin.
Not really a robust item the wall charger!
Yes, mine was one of the good ones too....
Sent from my Transformer TF101 using XDA Premium App
dazzawright said:
I had the same issue. For me i fixed my PSU by unplugging everything for 20 minutes. Sounds silly but it works. Unplug from the wall socket, take the usb out of the PSU and the TF and leave it al alone for 20 minutes.
Click to expand...
Click to collapse
I second this.....same has happened several times to me when trying to get usb 3 cable to act as charger lead extension. Just leave it unplugged for 15- 20 mins and all ok.
Charger or dock battery??
I don't know the inner-workings between the charging adapter, the USB cable and pins - and the dock battery itself so I thought I'd throw this out there:
My dock battery has stopped charging. I can plug the tablet into the dock - have the dock plugged into the wall - and the tablet itself will charge (and the adapter will heat up) - but as soon as I remove the tablet, the adapter cools down, and the dock battery never charges (just blinks orange forever).
I've just been assuming all along that it was the dock or the dock battery that had gone bad for some reason.
But would it be possible that it could be a pin / cable / adapter issue instead?
I wonder if different pins control the charging of the tablet vs the charging of the dock?
I'm *hoping* it's the dock itself because at least I can still return that and wait for another to come in stock. But if it's the adapter or cable, it looks like I'd be SOL and have to send my whole freakin tablet back for a replacement!
I'm sitting on hold with Asus now because last night neither my tablet or dock would charge. I do not have the extension cable but have one on order from Ebay. I was planning to test all the pins on the cable while the unit was charging to figure out which additional pins are communicating with the charger to start the charge. While sitting on hold I came across this post and decided to try the charger again and now my tablet is charging. Will try the dock once I'm fully charged.
I love my TF but this charging stuff is micky mouse. I hear some people can charge connected to a PC, I have never been able to. Now I need to do some more searching to see who had what extension cable from where.
Check the thread link in my signature to see my finding for making a cable to allow charging from other sources.
It's all a bit of pot luck by the sounds of it.
Don't leave it on charge over night, don't plug the wrong sort of USB lead in and don't move the charger.
I think I'll be buying some £2 Ebay charger as soon as they appear, can't be any worse.
dazzawright said:
I had the same issue. For me i fixed my PSU by unplugging everything for 20 minutes. Sounds silly but it works. Unplug from the wall socket, take the usb out of the PSU and the TF and leave it al alone for 20 minutes.
Click to expand...
Click to collapse
A sense of panic set in when my charger stopped working after trying to use a USB 3.0 extension cable I purchased from Monoprice. After following this simple suggestion, I'm happy to report that all is working once again.
I never did get the USB 3.0 extension cable to work though. It was one that others have reported success with too. I guess I'll be sticking to a cheap extension cord for now.
This extension from CompUSA works like a charm. Its prices is awesome too. The adapter charges TF/KB seamlessly for me. Spread the words.
http://www.compusa.com/applications/SearchTools/item-details.asp?EdpNo=4662497&CatId=5476
jschmier said:
A sense of panic set in when my charger stopped working after trying to use a USB 3.0 extension cable I purchased from Monoprice. After following this simple suggestion, I'm happy to report that all is working once again.
I never did get the USB 3.0 extension cable to work though. It was one that others have reported success with too. I guess I'll be sticking to a cheap extension cord for now.
Click to expand...
Click to collapse
+1, I had a "[email protected]# no this isnt happening" moment. Still waiting for my extension cable.
12 foot cable
AcidCool2K said:
This extension from CompUSA works like a charm. Its prices is awesome too. The adapter charges TF/KB seamlessly for me. Spread the words.
http://www.compusa.com/applications/SearchTools/item-details.asp?EdpNo=4662497&CatId=5476
Click to expand...
Click to collapse
Ultra also makes this cable in a 12 foot length. Part #U12-40579. I have both the 6 foot and 12 foot lengths and they charge my 32TF and dock without issues.Both can be purchased from CompUSA.

[Q] Nexus S (i9020a) Charge on an angle?

Hello
I am not sure how to properly explain this but hopefully someone understands what is going on.
My Nexus S (i9020a) doesn't charge properly. The original Micro USB cable that came with my phone frayed and no longer works so I went and picked up a third party one for $20. For some reason my phone will only either charge on an angle or upside down with this charge cable.
(It isn't the cable its self it works perfectly on everything else Micro USB wise)
I do find it weird that I originally thought it was the USB port on the phone that was dying so I cracked it open and there seemed to be no sign of destruction on the board so I put it back together. I then plugged it into my Nexus 7 Asus wall charger with the Asus cable and the phone charges properly no angles or upside down.
Any suggestions besides buying a $24 charger from Google?
Things I have tried:
1: Different wall chargers
(Nexus S wall charger + 3rd party M-USB):crying:
(Original Galaxy Tab 7.0 Wall charger + 3rd party M-USB):crying:
(Asus Nexus 7 wall charger + Asus M-USB):good:
2:Cracking the phone open to check the usb port on the board.
Phone: Nexus S i9020a
Carrier: Telus
Rooted: No
Version: 4.1.1
PS: Let me know if you need anymore information.
The thumbnail below is what I mean by Charge on an angle.
I doubt opening your phone will show you if the usb port is broken, unless you opened it previously. The most likely problem is that your USB port is worn out, dirty, etc and it's having trouble making contact with the cable ('charging at an angle' is usually caused by this). My recommendation is to try to clean it. First power off your phone, then try sticking something that can scrape the little metal pads in the usb port. Be careful that you don't bend or snap anything inside or outside the phone, so be very gentle.
Another possible reason, which is a problem I've run into myself, is that the charger you're using just doesn't work with the phone. My Nexus S doesn't charge when I connect it to a generic USB charger in my car, nor does it charge with most wall chargers and the original Wall charger that came with my phone was DOA. The only way for me to charge my phone is at my computer or with some wall chargers that, I guess, output more amps (I'm noob when it comes to electrical stuff! ). If it doesn't charge in one USB port, try connecting to another one and/or switching cables.
If it doesn't charge at your computer, then it's probably dirty.
AlexRamallo said:
I doubt opening your phone will show you if the usb port is broken, unless you opened it previously. The most likely problem is that your USB port is worn out, dirty, etc and it's having trouble making contact with the cable ('charging at an angle' is usually caused by this). My recommendation is to try to clean it. First power off your phone, then try sticking something that can scrape the little metal pads in the usb port. Be careful that you don't bend or snap anything inside or outside the phone, so be very gentle.
Another possible reason, which is a problem I've run into myself, is that the charger you're using just doesn't work with the phone. My Nexus S doesn't charge when I connect it to a generic USB charger in my car, nor does it charge with most wall chargers and the original Wall charger that came with my phone was DOA. The only way for me to charge my phone is at my computer or with some wall chargers that, I guess, output more amps (I'm noob when it comes to electrical stuff! ). If it doesn't charge in one USB port, try connecting to another one and/or switching cables.
If it doesn't charge at your computer, then it's probably dirty.
Click to expand...
Click to collapse
Thanks for input.
I don't think the plug is worn out since it works perfectly with my Nexus 7 charger. I did look into the bottom of the phone and it does look a little dirty so that could be a small part of the issue but that doesn't explain why it it would work perfectly with one charger and not another. It does sound like it could be just the wall chargers I am using are not as good as the Nexus 7 charger (When I use the nexus 7 cable and charger the cable seems to fit alot better and it very firm when it is plugged in where when I plug in my 3rd party cable it is loose and feels like it is going to fall out. I might just buy the extra asus charge set from google since I know its a 100% work rate. was just hoping I wouldn't have had to spend that on just a wall chargers. >...<

Asus TF101 cannot charge

Hi all,
I owned the Asus TF101 for more than 1 year (warranty expired).
And now my pad cannot charge anymore. I sent to the service, and they talked that mainboard need to be replaced :crying:
But, it still works fine, just cannot charge. I think the charger is broken and bought a chinese charger, but it can only charge a little (20-30%), then stop charging.
Do you think the mainboard is dead? I can believe i that.
Does anyone have this problem and how to fix?
Thanks.
chat2004 said:
Hi all,
I owned the Asus TF101 for more than 1 year (warranty expired).
And now my pad cannot charge anymore. I sent to the service, and they talked that mainboard need to be replaced :crying:
But, it still works fine, just cannot charge. I think the charger is broken and bought a chinese charger, but it can only charge a little (20-30%), then stop charging.
Do you think the mainboard is dead? I can believe i that.
Does anyone have this problem and how to fix?
Thanks.
Click to expand...
Click to collapse
You say you bought a Chinese charger, if by this you mean you bought at USB charger, it will work but very slow and only with tablet off. The TF101 needs 15V on the charge pin to work and the stock charger provides that when pin 7 is grounded by the tab. When pin 7 is not grounded, it provides standard 5V and will not charge well. Try several things. Put stock charger in plastic bag then in freezer for a few hours in case you tripped the over current protection. Take it out and let it warm up in bag then try charging. If that does not work, you can try get a Dynex video camera charger. It has various levels of output voltage on a usb connector. Set voltage top 11V and you should be OK. The TF uses a physical USB connector, HOWEVER the voltages in the connector as well as other signals ARE NOT USB compliant. This means a standard USB charger WILL NOT WORK.
Rumbleweed said:
You say you bought a Chinese charger, if by this you mean you bought at USB charger, it will work but very slow and only with tablet off. The TF101 needs 15V on the charge pin to work and the stock charger provides that when pin 7 is grounded by the tab. When pin 7 is not grounded, it provides standard 5V and will not charge well. Try several things. Put stock charger in plastic bag then in freezer for a few hours in case you tripped the over current protection. Take it out and let it warm up in bag then try charging. If that does not work, you can try get a Dynex video camera charger. It has various levels of output voltage on a usb connector. Set voltage top 11V and you should be OK. The TF uses a physical USB connector, HOWEVER the voltages in the connector as well as other signals ARE NOT USB compliant. This means a standard USB charger WILL NOT WORK.
Click to expand...
Click to collapse
No, I bought a charger like this:
http://www.amazon.com/POWER-ADAPTER-TRAVEL-CHARGER-TRANSFORMER/dp/B007LI1UOE/ref=sr_1_1?ie=UTF8&qid=1351734650&sr=8-1&keywords=asus+transformer+charger
Output: 15V, 1200mA
But, at the first time, my pad can charge up to 50% and then stop (not charge when shutdown also)
And now, it will not charge anymore, when I plug the charger, it's only charged 1 or 2 minutes and then stop.
I tried put the original charger to the freezer many time, but not fixed.
Try a factory data reset in the Android settings menu. If that doesn't work, see if you're power adapter can be taken apart (most can to handle international plugs). If so, clean all the metal points where the wall plug contacts the power transformer.
chat2004 said:
Hi all,
I owned the Asus TF101 for more than 1 year (warranty expired).
And now my pad cannot charge anymore. I sent to the service, and they talked that mainboard need to be replaced :crying:
But, it still works fine, just cannot charge. I think the charger is broken and bought a chinese charger, but it can only charge a little (20-30%), then stop charging.
Do you think the mainboard is dead? I can believe i that.
Does anyone have this problem and how to fix?
Thanks.
Click to expand...
Click to collapse
I had the same problem and found a solution:
It's not the cable, but the 2 pins inside the USB opening at the charger!
If you look inside at the top you will find two pins that suppose to fit in the two holes from the USB connector.
By pulling them in and out, these pins move up slowly until they dont fit in the holes anymore.
Grab a little screwdriver and move the pins a little bit back out by sticking the screwdriver behind them.
Reattach the USB cable...you'll be surprised!
A buddy @work bought a used TF101 so cheap ($179, B60 a few months back from Cowboom). It came looking great but just won't charge (is it why it was cheap ?). We tried the freezer trick, that didn't work. The cable was fine hooking up to the PC and would charge slowly from there ----> Finally the cause: it's the cable itself. I gave the man my spare cable (bought @amazon, 2 for $5).
Hic,
I borrow a new charger from my friend, and still not work. I tried reset many time, but nothing happened.
I think there is problem with the main or the charge port connector.....
Maybe I will try to open it. Mainboard replacement take about 200$ (from ASUS service), and I think buy a new one is better. Say goodbye to ASUS.
clicky007 said:
I had the same problem and found a solution:
It's not the cable, but the 2 pins inside the USB opening at the charger!
If you look inside at the top you will find two pins that suppose to fit in the two holes from the USB connector.
By pulling them in and out, these pins move up slowly until they dont fit in the holes anymore.
Grab a little screwdriver and move the pins a little bit back out by sticking the screwdriver behind them.
Reattach the USB cable...you'll be surprised!
Click to expand...
Click to collapse
Worked like a charm!
Sometimes the problem is less complicated than you might think
For greater clarity it's the two outside pins on the row of 4
Does not work for me - also the freezer thing...
My problem is irritating: Yesterday the Charger did not work at all. Then after many attempts to fix it (like freezer,...) I just put it into an Apple wallcharger - did not work either but then I used the Asus Charger and it worked.
Now it does not work - one more time...
Any suggestions?
theares2014 said:
Does not work for me - also the freezer thing...
My problem is irritating: Yesterday the Charger did not work at all. Then after many attempts to fix it (like freezer,...) I just put it into an Apple wallcharger - did not work either but then I used the Asus Charger and it worked.
Now it does not work - one more time...
Any suggestions?
Click to expand...
Click to collapse
The reason other chargers (like Apple) do not work is that they only output 5 VDC. The Asus wall wart outputs 15 VDC when an Eee Pad is detected, otherwise it puts out 5 VDC.
It could be a bad cord that one of the contacts is loose and it sometimes does not detect the Eee Pad.
frederuco said:
The reason other chargers (like Apple) do not work is that they only output 5 VDC. The Asus wall wart outputs 15 VDC when an Eee Pad is detected, otherwise it puts out 5 VDC.
It could be a bad cord that one of the contacts is loose and it sometimes does not detect the Eee Pad.
Click to expand...
Click to collapse
Thanks for your answer!
Yes, I noticed that too. I put it in a Apple Charger (is it normal that there is no charging remark on the display?) but then after doing this my Asus charger worked - for 5 hours
I am confused...
I have a new problem, my dock doesn't charge. It show the battery with 0 charge but when I connect the charger. It only charge up the tablet. Dock will remain at 0 charge. Any suggestions? I have try fully wipe & reinstall other rom but still having the same problem.
Sent from my Transformer running no name cm10.1 using Tapatalk 2.
Many users who have let their dock get to 0% have had this issue. There is a toggle switch in the dock that changes state when you get to 0% and does not always switch back when you charge it again. You can try opening the dock and changing the state of this switch and then it should charge after that.
Why it was designed this way, I have no idea.
frederuco said:
Many users who have let their dock get to 0% have had this issue. There is a toggle switch in the dock that changes state when you get to 0% and does not always switch back when you charge it again. You can try opening the dock and changing the state of this switch and then it should charge after that.
Why it was designed this way, I have no idea.
Click to expand...
Click to collapse
There's also a user that reported a "known bug" about it here, saying he was going to RMA it. Supposedly some docks are missing a part to make allow recharge at 0%. I can't confirm or deny it.
I'm having the same problem with my charger right now, it will only trickle charge from the ASUS provided adapter while the unit is off, and when the unit is on, it recognizes that it's plugged in to the charger, but does not charge for some strange reason. Is there a possibility that this is a hardware problem within the tablet? or is this a charger related problem?
nekoxandu said:
I'm having the same problem with my charger right now, it will only trickle charge from the ASUS provided adapter while the unit is off, and when the unit is on, it recognizes that it's plugged in to the charger, but does not charge for some strange reason. Is there a possibility that this is a hardware problem within the tablet? or is this a charger related problem?
Click to expand...
Click to collapse
Gonna answer this in a few days.
As you can see up on the page Ive got this ***** issue. I bought a new original asus charger for around 35 bucks, it will come the next days. Then I can tell you whether it is a problem with the charger - or not.
A fix which worked for me (for about 75%):
Connect the TF to a Apple wallcharger (so it should charge - doesnt do it at all - everythings good). Wait like 10 minutes then you can reconnect it to the Asus charger. If this doesnt help: Strech the cable a bit while "charging".
I had the same issue when I bought my "charge cable" come to find out it didn't work because it was more of a sync so it would mainly sync to PC or device it was connected to then I leave it plugged in over 24hrs and maybe get about 52% of charge ... I bought a charger from Amazon works like a charm and really cheap
This one I bought for tf101 works like a champ
Check this out on AMZN:
US POWER ADAPTER WALL TRAVEL CHARGER FOR ASUS EEE PAD TRANSFORMER TF101 TF201
http://www.amazon.com/dp/B007LI1UOE/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
Sent from my SGH-I747 using Xparent Cyan Tapatalk 2
crashpsycho said:
I had the same issue when I bought my "charge cable" come to find out it didn't work because it was more of a sync so it would mainly sync to PC or device it was connected to then I leave it plugged in over 24hrs and maybe get about 52% of charge ... I bought a charger from Amazon works like a charm and really cheap
This one I bought for tf101 works like a champ
Check this out on AMZN:
US POWER ADAPTER WALL TRAVEL CHARGER FOR ASUS EEE PAD TRANSFORMER TF101 TF201
Click to expand...
Click to collapse
I've heard that it's better to NOT buy this charger because the voltage makes the touch digitizer screwy, and can cause battery damage in the long run.
Asus TF301 - charging problems
clicky007 - I just wanted to say a BIG THANK YOU - I 'tweeked' the contacts and my ASUS is charging again. Just as back ground, I had always used the ASUS charger and cable together. I have only unplugged the USB connector a few times, as few as 6 (guess-timation). Not exactly a high level of uses/insertions. Poor quality Asus!
Anyway - Many thanks to Clicky007 and Forum-xda
clicky007 said:
I had the same problem and found a solution:
It's not the cable, but the 2 pins inside the USB opening at the charger!
If you look inside at the top you will find two pins that suppose to fit in the two holes from the USB connector.
By pulling them in and out, these pins move up slowly until they dont fit in the holes anymore.
Grab a little screwdriver and move the pins a little bit back out by sticking the screwdriver behind them.
Reattach the USB cable...you'll be surprised!
Click to expand...
Click to collapse
clicky007 said:
I had the same problem and found a solution:
It's not the cable, but the 2 pins inside the USB opening at the charger!
If you look inside at the top you will find two pins that suppose to fit in the two holes from the USB connector.
By pulling them in and out, these pins move up slowly until they dont fit in the holes anymore.
Grab a little screwdriver and move the pins a little bit back out by sticking the screwdriver behind them.
Reattach the USB cable...you'll be surprised!
Click to expand...
Click to collapse
surprisingly enough this fixed my charging problem as well. At first I couldn't identify these two pins that you mentioned but for anyone else having the same issue I had. looking at the charging port on the TF with touchscreen facing up and back of the TF down the pin is not on the middle bar with the multiple connectors but it's it's attach to the top part of the port as illustrated by the tilda in my badly drawn diagram below and dashes representing the middle connector bar
_____
| ~ ~ |
|-------|
|____|

CHOETECH USB-C to USB 3.0 Cable

Hi everyone,
So I am here again to quickly give my thoughts on another CHOETECH accessory, this time it is their USB C to USB 3.0 cables.
I have had a cable previously from Rankie, but have found the build quality to not be as sturdy as the CHOETECH ones. These ones are flexible, feel strong with their braided cables, and the design is excellent and looks very professional, very nice on the eye to others who may see them.
The data transfer is fast, as you would expect from USB 3.0! The charging is on par with other cables.
I have attached the link here for my review on Amazon https://www.amazon.co.uk/review/R1YBGPQVRSGV75/ref=cm_cr_dp_title?ie=UTF8&ASIN=B01LYW4WIY&channel=detail-glance&nodeID=560798&store=electronics, and also the link for the product itself https://www.amazon.co.uk/gp/product/B01LYW4WIY/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Hope I have helped some of you out, and if any of you have any questions for things I may not have covered, then I shall be pleased to help you out!
I prefer Anker Type-C cable, then Tronsmart next.
It will break after a few months.
I too have received these at a discounted price to review and must say the following:
These cables from Choetech are again of amazing quality. Especially as they are braided. I love the fact they came in two different colours meaning one matches my Nexus 6P in black and the other matches my Pixel C in grey. They are a good length to use at a desk and have good file transfer speeds to a computer when plugged in via USB 3. The charge rate isn't as quick as USB C to C but that is to be expected, however do not let that fool you, they still charge pretty quick although usb charge booster on my motherboard may be helping with that more than anything, but it's comforting to know these cables can handle the extra power sent down by my motherboard. I highly recommend these cables and would buy them again especially from Choetech.
Just a word of warning, I bought accessories from their official Aliexpress shop including USB-C to USB-C cable and car charger. While using the two I managed to destroy USB port on my Nexus 6P.
I plugged the cable as I was leaving a concert day before yesterday and as I was driving home I started to smell something like electric parts burning. At first I thought that it is the smell of the brushes on my car warmer blower. Blower has been making strange noises lately. But as the smell started to get more intense, I was really worried that my car is going to burn. I unlocked my 6P and noticed that the battery was not charging and yanked the cable. The plastics on the cable were like butter and pretty hot! I panicked and pulled the cable out, disconnected the charger and continued to home. It was late in the evening and I couldn´t see what had happened to my phone.
As I got home I tried to charge my phone and it didn´t charge. I noticed that battery has gone from 87% to 56% in about hour. The backside of my phone was melted little and there was damage around the USB port.
Here is few hazy pictures i took with my wifes potato:
http://imgur.com/a/qqQfZ
I asked about this from Choetech via Aliexpress and they were sorry. They asked if I wanted another cable to substitute the melted one. I haven´t replied yet.
Gobiastard said:
Just a word of warning, I bought accessories from their official Aliexpress shop including USB-C to USB-C cable and car charger. While using the two I managed to destroy USB port on my Nexus 6P.
I plugged the cable as I was leaving a concert day before yesterday and as I was driving home I started to smell something like electric parts burning. At first I thought that it is the smell of the brushes on my car warmer blower. Blower has been making strange noises lately. But as the smell started to get more intense, I was really worried that my car is going to burn. I unlocked my 6P and noticed that the battery was not charging and yanked the cable. The plastics on the cable were like butter and pretty hot! I panicked and pulled the cable out, disconnected the charger and continued to home. It was late in the evening and I couldn´t see what had happened to my phone.
As I got home I tried to charge my phone and it didn´t charge. I noticed that battery has gone from 87% to 56% in about hour. The backside of my phone was melted little and there was damage around the USB port.
Here is few hazy pictures i took with my wifes potato:
http://imgur.com/a/qqQfZ
I asked about this from Choetech via Aliexpress and they were sorry. They asked if I wanted another cable to substitute the melted one. I haven´t replied yet.
Click to expand...
Click to collapse
Never heard of the Aliexpress shop always bought them from Amazon. Sorry to hear about your device, however its probably more likely the charger than the cable as i've been using 3 of these cables and had no issues over the last few months now.
brichardson1991 said:
Never heard of the Aliexpress shop always bought them from Amazon. Sorry to hear about your device, however its probably more likely the charger than the cable as i've been using 3 of these cables and had no issues over the last few months now.
Click to expand...
Click to collapse
Aliexpress is a small time business somewhere around far East.... You should try it sometimes.
I was using Choetech charger atm, which I bought on same order with the cable. I can´t blame any other than Choetech for destroying the phone.

honor 8 catches fire

I'm driving down the road in my truck today. I start smelling something burning. I look around to see what it is. The USB cable melted in half. Took some of the charging port with it.
Almost all the pins are exposed. It still charges but I'm not sure for how long.
What should I do?
I guess I'm going to send it in to get fixed. The phones may be a month old. I've used that charging adapter plenty of times and never had a problem.
What's the type C cable just bad?
raven.warsong said:
I'm driving down the road in my truck today. I start smelling something burning. I look around to see what it is. The USB cable melted in half. Took some of the charging port with it.
Almost all the pins are exposed. It still charges but I'm not sure for how long.
What should I do?
I guess I'm going to send it in to get fixed. The phones may be a month old. I've used that charging adapter plenty of times and never had a problem.
What's the type C cable just bad?
Click to expand...
Click to collapse
Although USB-C is a more convenient standard, it's also extremely finicky if you use cheap cables. If the cable burned out then chances are there was more current going through it than it could handle.
A good read about USB-C:
https://www.xda-developers.com/138824-2/
I don't get why they don't just publish a set of certification rules for USB Type-C already, or stop companies from using USB Type-C if it's still in the development stage.
raven.warsong said:
I'm driving down the road in my truck today. I start smelling something burning. I look around to see what it is. The USB cable melted in half. Took some of the charging port with it.
Almost all the pins are exposed. It still charges but I'm not sure for how long.
What should I do?
I guess I'm going to send it in to get fixed. The phones may be a month old. I've used that charging adapter plenty of times and never had a problem.
What's the type C cable just bad?
Click to expand...
Click to collapse
It's probably because voltage via lighter adapter is much different

Categories

Resources