Database Info

[Q] Overclocking

Im rooted my desire Z yesterday to the gingerbread sense 3.0/3D rom.
im very happy that i have done it and my battery experience is either improved.
but my experience of the reaction time, smooth animation ect. were kindly bad
this is why i want to overclock my processor, but the rom included the new kernel 2.6.35.10 to be exactly. this kernel is not yet overclockable and i wanna know why.
- why make different kernels need different methods of overclocking
- why can it by bad if you overclock it to high.
- can i just flash another kernel to overclock my new gingerbread sense 3.0 rom.

Soulbody said:
Im rooted my desire Z yesterday to the gingerbread sense 3.0/3D rom.
im very happy that i have done it and my battery experience is either improved.
but my experience of the reaction time, smooth animation ect. were kindly bad
this is why i want to overclock my processor, but the rom included the new kernel 2.6.35.10 to be exactly. this kernel is not yet overclockable and i wanna know why.
- why make different kernels need different methods of overclocking
- why can it by bad if you overclock it to high.
- can i just flash another kernel to overclock my new gingerbread sense 3.0 rom.
Click to expand...
Click to collapse
if you overclock the processor of your device you can smoke your DZ
but if you do it with careful it is not bad for your device.
the kernel that you have its a stock kernel (factory kernel) and its not customized for to be over/underclocked... you should flash another kernel for to change CPU speeds...
nornally you can overclock your desire z (good machine mate ) 1.300mhz-1500mhz i not recommend to do overclock upper than 1500-1700... i had read some threads that some people was smoked his device (all with the proccessor QUALCOMM SNAPDRAGON 1ghz)another think its the freeze problem when you overclock your processor too much.. be careful!
and one important thing.. also its important if you do underclock.... don´t put it under 245mhz more or less because maybe your device don´t has sufficient power to exit of stanby mode
i recommend that ALWAYS do overclock with SETCPU.apk that its available free for XDA MEMBERS its the most safety mode
sorry for my english

SERGI.3210 said:
if you overclock the processor of your device you can smoke your DZ
but if you do it with careful it is not bad for your device.
the kernel that you have its a stock kernel (factory kernel) and its not customized for to be over/underclocked... you should flash another kernel for to change CPU speeds...
nornally you can overclock your desire z (good machine mate ) 1.300mhz-1500mhz i not recommend to do overclock upper than 1500-1700... i had read some threads that some people was smoked his device (all with the proccessor QUALCOMM SNAPDRAGON 1ghz)another think its the freeze problem when you overclock your processor too much.. be careful!
and one important thing.. also its important if you do underclock.... don´t put it under 245mhz more or less because maybe your device don´t has sufficient power to exit of stanby mode
i recommend that ALWAYS do overclock with SETCPU.apk that its available free for XDA MEMBERS its the most safety mode
sorry for my english
Click to expand...
Click to collapse
EDIT:for to do overclock you must to download a new kernel (compatible with your current rom) and flash it from recovery or via adb you decide!
cheeeerrrssss mate

Noob
Hey guys, just wanted to know if theres an easier way to overclock the newest htc kernel?

Hey guys, just wanted to know if theres an easier way to overclock the newest htc kernel?
Click to expand...
Click to collapse
YOU CANT OVERCLOCK AN STOCK KERNEL YOU MAY TRY AN OVERCLOCKABLE KERNEL IN DEVELOPMENT SECTIION OF YOUR DEVICE..
Sent from my NEXUS Susing the XDA mobile application powered by Tapatalk

htc sensation 1.83 ghz cpu speed

hi i been trying to get 1.8 ghz speed on my sensation, but couldn't find anything that will show step by step.
right now i have revolutionary hd 3.0.3 rom. with revolutionary hd stock kernal. and in the setcpu i couldn't get more then 568 mhz speeed.
can anyone please explain and point me at the right direction.
thans

most likely you need setcpu to auto detect your overclock...its a setting, click menu and then device selection

1.8 ghz is very unstable and could damage your device

Dont use setcpu.
Its better to leave it "ondemand". Its much safer.

mabir said:
hi i been trying to get 1.8 ghz speed on my sensation, but couldn't find anything that will show step by step.
right now i have revolutionary hd 3.0.3 rom. with revolutionary hd stock kernal. and in the setcpu i couldn't get more then 568 mhz speeed.
can anyone please explain and point me at the right direction.
thans
Click to expand...
Click to collapse
Firstly, if you're on the stock kernel you won't get 1.8GHz - max on stock is 1.2GHz, so you'll need a custom kernel to allow those speeds. For SetCPU, go to Settings>Applications>Manage Applications>All - go to SetCPU and clear data. Then go into SetCPU and select Auto Detect. It should then give you up to 1.2GHz.

You should not need Setcpu if you use Android HD Revolution Rom because the rom come with that overclock on it. Go look yourself. You will need root however.
http://forum.xda-developers.com/showthread.php?t=1098849

isn't it right, that the costum kernel just speed up ONE core of the cpu?

yasinis said:
isn't it right, that the costum kernel just speed up ONE core of the cpu?
Click to expand...
Click to collapse
Previously that was the case, but Revolution HD 3.0.3 has a script you can flash that applies OC to both cores. Revolution HD 3.0.4 no longer needs the script flashed on top and comes with a custom kernel out of the gate running at the processors true speed of 1.5ghz.
Sent from my HTC Sensation 4G using XDA App

You probably won't be able to clock that high anyway... You'll must likely reboot higher on anything higher than 1786 mhz....
Sent from my Tmous Revolution HD sensation.....

custom ROM + stock kernel = no OC
custom ROM + custom kernel = OC
basically you need to flash custom kernel, mike already posted in his thread for sensation custom kernel.
there is a kernel that support till 2Ghz, but i don't recommend though, your phone gonna be hot and the battery won't last long.
and on-demand governor is the best.

I got up to 1.7Ghz running stable using Android Revolution and an RCmix kernel i think it was. Battery drain was quite bad on that kernel though so switched to the stock Revolution HD kernel running at 1.56GHz, stable and good battery life

[Q] Are there any OC Kernels that work with the MIUI Rom?

Are there any working overclocked kernels out there that will work with the latest version of the MIUI port for the Triumph? I believe I read that a custom tweaked kernel came packaged with it but I was wondering if maybe any of the current OC'd kernels will work with this Rom or if any are in developement.
The MIUI Rom is amazing and an overclocked kernel to match would put it over the top in my eyes!

There was one released today. I've been running it at 1.7ghz without any problems .
mOCk kernel for MIUI
There is also another one being worked on that is supposed to be released tomorrow.
Speed Deamon kernel for MIUI
I agree with you on MIUI, it's pretty awesome!

mOCK has been working well for me so far. I scored a 2100 on quadrant just running MIUI without a kernel. Overclocked at 1.7 with minmax scores a 3600.

[Kernel List] HTC Doubleshot Kernels. February 21, 2012.

Kernels for the HTC Doubleshot. I'll update, and make it look more nice later. I put some time into this, so hopefully it's used. If there's any Kernels I'm missing, or info that's wroung let me know. Now I give you the First
::HTC Doubleshot Kernel List::
Basic Terms:
Undervolt (UV): An Undervolted Kernel is a Kernel that's supossed to bring in Battery savings. The higher the Undervolt, the better the battery savings. But this isn't with out drawbacks. Some CPU's can't handle higher Undervolts. So you'll have to figure out if your CPU can handle it. This can be done by starting at the highest UV, then see if it causes issues. If so, drop to the next UV (8%, 5%, 2%). If no issues (Like Reboots, Blackouts, etc.) Enjoy the UV.
Overclock (OC): This is simple, it's just making yours phones CPU go faster than it comes stock. Our device has a Qualcomm® 8260 dual core Snapdragon™, 1.5Ghz (But shipped at 1182Mhz). So an OC would be anything higher than a 1.2Ghz (Really 1.5Ghz). With an Adreno 220 GPU.
GPU: A graphics processing unit or GPU (also occasionally called visual processing unit or VPU) is a specialized electronic circuit designed to rapidly manipulate and alter memory in such a way so as to accelerate the building of images in a frame buffer intended for output to a display.
For the less geeky, it controlls anything based with graphics.
Icecream Sandwhich (ICS) : Android 4.0.X
Stock Speed 1.2Ghz UV 0%
OC 1.5Ghz/Slightly UV 2%
OC 1.5Ghz/Middle UV 5%
OC 1.5Ghz/Extremely UV 8%
These Kernels are made by tbalden. There to only be used with ICS Roms. There are both OC, and UV Kernels.
http://forum.xda-developers.com/showthread.php?t=1505394
[ROM][Feb 19 2012] Pyr'o'Ice ICS Desensed 1.1.0 - Android 4.0.3, AOSPish, 1.5GHz OC
The Kernels are the 3rd post down, and updated when need be.
Gingerbread (GB) : Android 2.3.X
Note: Anybody using any newer Radios, or HBoots. Any kernel that isn't Stock might cause issues. Most GB Kernels where made for the Stock Hboot, and Radio.
How to flash these: Reboot into Recovery. Wipe Cache, Dalvik Cache, and Mount System. Then Flash Kernel. Wait 10 Minutes (For best results) Then do a regular reboot.
Stock Kernel
This is the Kernel that comes on the Stock Rom. No OC, no added parts. Just how HTC sent it. Use this if you want a super stable Kernel. Or flash a bad Kernel, and can't boot.
Thanks to Undead for making this flashable Zip. (Enjoy your GSII Undead)
http://www.4shared.com/file/ect_yUtz/Stock_Kernel_Undeadk9.html
Romanbb's Kanged Kernel v.0.1
OC to 1.512 GHz
[*]UV across the board
[*]Upgraded to .14 from .10
[*]compiled with Snapdragon optimizations
Theres two of these Kernels. They're both very unstable, and cause a lot of random reboots. They're for use for any Rom based of the Stock Rom.
http://forum.xda-developers.com/showthread.php?p=18611364
Stock Kernel with CIFS.ko, Tun.ko, NLS_UTF8.ko.
By Nusferatu
Just a stock kernel with CIFS.ko , TUN.ko , NLS_UTF8.ko built in
Works fine for me except for 1 bug (it's related to cifs i suppose) :
- on samba server rights for folder\files must be 777 or cifs won't allow to execute\view any.
http://forum.xda-developers.com/showthread.php?p=19721393
Unity Kernel va1 for Doubleshot.
By the Unity Team
- 2.6.35.14
- 2WCR ( 2-Way Call Records)
- NOOP I/O Sheduler
- SLQB
- OC 1782Mhz (1.8Ghz)
Default Speed 1512Mhz (1.5Ghz)
-JHash3
-Flash disabled @ 10% Battery & 5 Degrees Temp.
-Lower Wi-Fi Voltage
-Wi-Fi PM_Fast in Standby
-Tweaked Governors
-VDD SySFS Interface
-Fixed Scaling Cor_Freq
-GPU OC up to 320Mhz
-X2 Kernel Compression
-Cifs/Tun/UTF8
This is the only Kernel made by a Dev Team.
Heres the Website http://www.virtuousrom.com/
This Kernel is "Stable" any clock speeds above 1080Mhz causes issues, reboots, etc. But IMO this is the best Kernel for any GB Rom. This can be used with MIUI, any Sense 3.0, and Stock Based Rom.
The Download Link for this Rom is Broken, so I'll upload it later tonight.

I'll Upload any Kernel, to any File share site on Request.
Sent from my HTC myTouch_4G_Slide using Tapatalk

--------------
Sent from my HTC myTouch_4G_Slide using Tapatalk

sticky pls
sticky pls

Correction - the maximum processor clock speed as recommended by the manufacturer is 1.5 - HTC nerfed it down to 1.2, so saying it's a 1.2 processor is not accurate.
The GPU is the Adreno 220.
I'll toss more tech specs in later.

Blue6IX said:
Correction - the maximum processor clock speed as recommended by the manufacturer is 1.5 - HTC nerfed it down to 1.2, so saying it's a 1.2 processor is not accurate.
The GPU is the Adreno 220.
I'll toss more tech specs in later.
Click to expand...
Click to collapse
I was using what HTC Said, but I updated it.

Hey could you upload the Virtuous Kernel plz

Can anyone tell me which one works best for the miui port? I'm on the one that comes with the rom but I heard v1a might be better and is it oc/uv
Thank's aren't asked for but appreciated

we have some new kernels over in the dev. section so far we know they work for stock 1.28.531.9, 1.28.531.10, and Bulletproof.

yogi2010 said:
we have some new kernels over in the dev. section so far we know they work for stock 1.28.531.9, 1.28.531.10, and Bulletproof.
Click to expand...
Click to collapse
I'll update .
Sent from my HTC myTouch_4G_Slide using Tapatalk

erikmm said:
Can anyone tell me which one works best for the miui port? I'm on the one that comes with the rom but I heard v1a might be better and is it oc/uv
Thank's aren't asked for but appreciated
Click to expand...
Click to collapse
Unity va1, and it'll help with things. OC to 1.7Ghz. Lower Wifi Voltage, and Flash at 5%. I'll upload the Kernel if need be.
Sent from my HTC myTouch_4G_Slide using Tapatalk

can you upload it please, im assuming this should work on my rooted deox stock with a few bloat removed.

ac3theone said:
can you upload it please, im assuming this should work on my rooted deox stock with a few bloat removed.
Click to expand...
Click to collapse
When I get home I'll upload. But blue has a 1.7Ghz OC Kernel. Now.
It's Always Sunny in XDA

AgentCherryColla said:
When I get home I'll upload. But blue has a 1.7Ghz OC Kernel. Now.
It's Always Sunny in XDA
Click to expand...
Click to collapse
I know but im not all that interested in Oc, more interested in battery savings. Also I use wifi alot so the unity kernel seems best to me.
Sent from my myTouch_4G_Slide using Tapatalk

I forgot to ask if any of these kernels support the latest software version 1.55 with hboot 1.45. And does the unity kernel support these version's?
Sent from my myTouch_4G_Slide using Tapatalk

ac3theone said:
I forgot to ask if any of these kernels support the latest software version 1.55 with hboot 1.45. And does the unity kernel support these version's?
Sent from my myTouch_4G_Slide using Tapatalk
Click to expand...
Click to collapse
Unity might work, can't say. All other kernels won't.
It's Always Sunny in XDA

i still cant find the link for Unity Kernel va1

[Q] unhappy with phone performance

First...
hey, i have latest vipers rom 1.3.5 but fell my phone little laggy and somethimes it freeze and he is working with big lags someone has idea why is that ? my kernel version is 3.0.36 bricked !
Second...
Is it possible to restore my phone like when it was purchased from store, very first android firmware and everything, and if i do that is it gonna work better and is it gonna have better performance

No it wont run better. Have you tried other ROM's?
Beamed from my Senny..

no only ordroid but i am thinking of changing current rom i like HTC sense but i also want to try some other.
is there a chance all this to be becouse of kernel, should i change kernel first

Make a Nandroid backup of your current rom and yes, you could try different kernels, but you could also try different roms. If you like the sense based roms try Elegancia (there are different sense versions) or Android Revolution HD. As far as I know the development of Ordroid is finished so you will not see any update on that but the two other mentioned above are updated and they are really good roms. Try them and as you have the backup of Vipers rom you can always revert back to that.

True give other rom a try. Also try out jelly bean. I'm using paranoid Android by Dragun and it's very fast with newest kernel. I came from viper to paranoid Android and I love it. It's a great rom. Try it out too and see what you think. It's been stable and amazing! Tethering works perfectly with Wi-Fi tether and it's not laggy. I've personally really enjoyed the switch. At first I was worried how stable jelly bean would be but it's proven to be smooth fast and really stable. So while trying out different roms do give this a try I think you will like it.
Sent from my HTC Sensation using xda premium

I installed cm10 by bruce it's very good and smooth but,,, he has performance option in settings and there i can over clock and set frequencies of my cpu.
I was reading about Overclocked Kernel v1.5.2 by SebastianFM and faux kernel that they are realy good and fast. i also want to play 3d games so is it better to keep cm10 stock kernel or instal some of them ???

ivanmadzarov said:
I installed cm10 by bruce it's very good and smooth but,,, he has performance option in settings and there i can over clock and set frequencies of my cpu.
I was reading about Overclocked Kernel v1.5.2 by SebastianFM and faux kernel that they are realy good and fast. i also want to play 3d games so is it better to keep cm10 stock kernel or instal some of them ???
Click to expand...
Click to collapse
sebs and faux kernel are of sense roms ..wont work for aosp/cm9/cm10 roms
keep the stock one imo ..its good enough

ivanmadzarov said:
I installed cm10 by bruce it's very good and smooth but,,, he has performance option in settings and there i can over clock and set frequencies of my cpu.
I was reading about Overclocked Kernel v1.5.2 by SebastianFM and faux kernel that they are realy good and fast. i also want to play 3d games so is it better to keep cm10 stock kernel or instal some of them ???
Click to expand...
Click to collapse
tamcore kernel works with cm10, but you wont get support from the developer.
this kernel has everything