Hi everybody.
I've bought Nokia Carkit CK-100 for my car and my Nexus S (I-9020T)
Pairing and using was perfect before I updated my Nexus S > Android 2.3 (I did it last spring 2011) and higher.
After updating I've got an annoying problem:
While my carkit turns on, then I start my car, it automatically searching and connecting to my Nexus S. But Nexus connects almost each time in "speech" mode (carkit lights green) and my car audio system is being muted. After performing any call from my phone, then I press the END CALL button, carkit is become idle (carkit lights blue), and makes my audio sounds the music.
I've tried many different phones. All among of my Nexus S works perfect.
I've tried to use another one same Carkit CK-100 but the problem is persist with my Nexus.
I'd flash different RADIOs, tried to use many firmwares, rooted and unrooted, stock and customized. Tried to turn off the A2DP mode. Tried to update FW of my carkit to recent one. THE PROBLEM IS PERSIST, and it is VERY ANNOYING!
Please somebody tell me an advice how to solve this issue?
I love my Nexus very much and won't to dismantle the Carkit from my car.
Related
I have bought a Plantronics M3000 bluetooth headset for my QTEK 2020. I have no problems pairing, calling and answering. However the headset just shuts off after a few minutes of conversation. It doesn't just cut the conversation but shuts off. I can make multiple short calls but nothing longer than 3/4 minutes. It works, however, without problems on my wife's Ericsson T68. Anyone can help ? Thanks.
Marek
Hello,
I have the MDA2 (same as QTek2020) and a Plantronics M3000 and It's been working just fine.
The problem you describe it's very weird since you mentioned that the headset works fine with your wife's mobile, and that makes me think that your QTek has some sort of problem with the Bluetooth stack or hardware.
It may be well worth to try (if possible) another headset just to make sure that is not the M3000 fault.
Do you see any type of error or message on the screen at the time of disconnection?
Does it always cut the conversation at the exact same moment?
Does the problem match the time the QTek takes to power save?
Any other clues?
Thanks.
I did not have the occasion to test another BT headset on the Qtek. When it shuts down there isn't any message displayed.
I have no problems with the BT stack (with the Pocket Bluetooth Tools patch) when using it with a BT GPS (Emtac) receiver, it works for hours.
However, your suggestion that it might happen when the Qtek goes in energy saving mode is interesting. I will check that tomorrow.
I'll post the result.
Hi
I seem to have a similar poblem after installing pocket bluetooth tools!.
I use a Jabra BT 250..and I noticed that the headset just mutes during the call..
I am generally used to switching off the display of the XDA after placing the call to power save ...
So I discovered that the headset would mute whenever i switch off the xda after making the call (which it never did prior to installing PBT)!
any thoughts on that?
maybe it has to do with the auto switch off plugin?
Actually I just experienced that too...
If I place (or answer a call) the next time I try to use the phone via the BT headset I notice the BT headset was turned off... Yeah, it could be related to the Powersave feature on the today plugin that PBT installs as a plugin... :roll:
Need to investigate...
Best regards,
Rayan
Both my bt headsets have stopped working since installing pocket bluetooth tools latest version, I have reverted back to version 1005 and everything is fine. I have a sony-ericsson EBH-65 and a skypower clip on headset.
my platronics does the same also its annoying you cant even transfer the call back to the device you have to hand up turn off bt and then turn it abck on and headset mode back on it also does the same on my pc
when im on msn using it as a headset it just d/c and i have to turn it off and turn it back on again
dont see what the problem is
btw the range on the xda2 and platronics is amazing i had it on my bedrooms desk and i went outside it passed through the living room wall and the patio window and i was stood 5m down my garden im sure it would of been over 10m and it was still working if i kept still when i moved it went crackly but ah well lol
just hope someone sorts the prob out
Hi,
I was having the same problem with the M3000. I just had confirmation from Plantronics that this problem is a bug in the product that occurs with the XDA II. I am currently in the process of returning the product.
Regards...Mike
Same problem M3000 doesn't work. Give up now before too much frustration makes you feel ill.
Try the Hello 2 headset. Work with my Aussie XDA2 and is very small and lightweight. Even had a neck chain to carry it around like a USB drive.
I have an XDA II with a Logitech Mobile Bluetooth Headset for the last 7 months.
I've just returned one of these headsets as faulty because I kept losing 85% volume in the ear pierce ocassionally when I received an incomming call. I then bought another one and guess what? same problem, so the fault has to be with the XDA phone itself. The problem is I only seem to get this problem with incoming calls, can't remember getting this problem when making a call. When the volume drops I can just about hear the caller but its extremely faint.
The only other Bluetooth device I use is my TomTom navigation unit and although I have had some problems with both devices working together I'm not getting regular problems, just things like the TomTom can't alway connect to the sat box or my headset doesn't always work when the phone rings.
Anyone else had this problem and more importantly the solution???
Thanks
Paul.
I had that problem and I was advised to turn off device, remove battery for 20 secs or so (ensure backup fully charged!!!) and then reinstall battery, reset device (soft) then finally re-install headset ans establish new BT pairing to headset.
fiddly but it did work
good luck
Pete
I did that as advised by Logitech but the problem still occurrs on occassions. Is it a problem with headset or XDA?
Hello,
In my car I have the Parrot CK3000 evolution car kit installed.
I can pair it with my nexus without problems.
After pairing incoming and outgoing phone calls should be routed through the handset but that doesn't happen.
My wife's htc hero, after pairing with the same handset, easily allows to establish the connection beetwen the hero and the handset long pressing the "parrot 2.51C" item in bluetooth settings and clicking the "Connect" item.
Long pressing the same item on my nexus shows a popup menu where the only option available is unpair.
Did anybody manage to make this handset work with nexus one?
For your information my parrot car kit has software version 2.51C and restarting the phone, resetting parrot memory, unpairing and pairing again didn't make any difference.
Regards,
Francesco
have a look at:
http://www.parrot.com/forums/english/viewtopic.php?pid=25879#p25879
Although this is for a ck3100.
I have this kit too. I'm at work so I can't test the link you put up but I don't think it will work. The nexus actually pairs with the device, it just won't connect. and the 3100 has an lcd screen so it runs completely different software
I used Parrot CK3100 with HD2. Everything was good! The sync was working very good with tons of rom. I tried with Acer Liquid. It was good. But when I tried with Nexus One original rom and Cyanogen rom I had a big problem with number. I always store the mobile phone number the following form: +36XXXXXXXX. All other phone managed it perfectly but N1 not.
I can sync the number with Parrot but the number was the following format: 36X-XXX-XXXX
It is WRONG!! I can't call the number without "+" I tried with the latest Desire (A10) rom and everything is fine!!!! Like with HD2!!! But the pairing is horrible with the A10. So I use Desire rom now.
I'm talking about a CK3100 here, but I had a problem when I first tried to pair it yesterday, it said it paired successfully but it didn't connect at all, no matter how many times I tried. The solution procedure for me was (maybe some step are not necessary at all but that's how I got it to work)
1. Unpair and delete the reference to the Parrot unit from the phone
2. Turn off phone bluetooth
3. Turn off car bluetooth (keys off until the Parrot turns the screen off)
4. Turn on phone bluetooth and enable visibility
5. Turn on car bluetooth
6. Pair from the Nexus One to the Parrot, enter pin
7. A request to access the agenda apeared on the phone, accept and you're ready to go.
I don't think it matters but just in case, I'm on stock rom (update1) and rooted.
PS: It's a total pain in the ass to have to re-record all the Parrot voice tags whenever I change my phone...
I managed to connect my CK3000 with N1 using the procedure that danimar1 describes.
No luck in copying my contacts to the parrot :/
Did anybody have success with this task?
F.
I've experienced this on other carkits too - it'll pair, but audio never transfers. Obviously a bug in the N1. I hope they fix it soon
In my case routing phone calls between parrot Ck3000 evolution and nexus one works.
The thing that I'm not able to do is to transfer my contacts.
Francesco
the ck3000 doesnt support contact syncing i dont think. that is the one bummer about android phones and bluetooth, no voice tag support. with my bb, it could use the phones voice recognition to voice dial from the car kit
danimar1 said:
I'm talking about a CK3100 here, but I had a problem when I first tried to pair it yesterday, it said it paired successfully but it didn't connect at all, no matter how many times I tried. The solution procedure for me was (maybe some step are not necessary at all but that's how I got it to work)
1. Unpair and delete the reference to the Parrot unit from the phone
2. Turn off phone bluetooth
3. Turn off car bluetooth (keys off until the Parrot turns the screen off)
4. Turn on phone bluetooth and enable visibility
5. Turn on car bluetooth
6. Pair from the Nexus One to the Parrot, enter pin
7. A request to access the agenda apeared on the phone, accept and you're ready to go.
I don't think it matters but just in case, I'm on stock rom (update1) and rooted.
PS: It's a total pain in the ass to have to re-record all the Parrot voice tags whenever I change my phone...
Click to expand...
Click to collapse
when you unpaired, did you delet the phone from the parrot memory also?
doalittledanse said:
when you unpaired, did you delet the phone from the parrot memory also?
Click to expand...
Click to collapse
No I didn't, everything was done from the Nexus One. But if you have problems connecting maybe it would be a good idea to do so.
danimar1 said:
No I didn't, everything was done from the Nexus One. But if you have problems connecting maybe it would be a good idea to do so.
Click to expand...
Click to collapse
and what firmware is your ck3000 on? im assuming thats an issue for me because ive never updated mine and its still at 2.10 i think
I'm sorry I have a CK3100, but anyway I never updated it. I got it a little more than 2 years ago, so I don't think it would be a firmware version problem.
Hey guys
Strange issue here. I paired my phone with my car through Bluetooth to make and receive calls using the car audio system. It works well.
However, if I fire Google Navigation, I can't here the spoken instructions through either the phone speaker or the car speakers.
I was not expecting navigation audio to be routed through Bluetooth audio, but I did expect the navigation instructions to come out of the phone speaker, as it does on the nexus one or the vibrant both running Android 2.2.
Is anybody else having this issue?
Thanks
Sent from my Nexus S using XDA App
bluetooth wont turn on
It just flashes the icon and does not turn on. From in settings same. Any ideas?
vapor311 said:
It just flashes the icon and does not turn on. From in settings same. Any ideas?
Click to expand...
Click to collapse
did you flash a new kernel or anything because the kernel in the dev thread is known to break bluetooth
if it does this stock out of the box try doing a system restore and then take it back if its still acting up because bluetooth should turn on
yea i used the pkg one that had SU etc on it. Suppose Ill have to flash back to stock arg.
just so peeps know with the bt issue flashing this fixed
http://forum.xda-developers.com/showthread.php?t=882333
Anyone?
Sent from my Nexus S using XDA App
Locking up slash rebooting while streaming bluetooth audio
Anyone else experiencing any sort of lockups rebooting streaming bluetooth audio. It seems like I can only get about 10 to 15 minutes streaming audio before the phone becomes completely unresponsive won't power on or anything
Sent from my Nexus S using XDA App
You should be thankful...I can't get more then 10 sec without it being cut off and play again...for...10 sec
what rom?
I had same issue once...i on CM7
Bluetooth doesn't stream audio to car - what's your experience
I've got a Ford Edge with the new Ford MyTouch/Sync system.
The Nexus S connects to the Bluetooth just fine; makes and receives calls perfectly. It will also connect to the Bluetooth Audio Stream for music playback, but won't play the audio over the car's speakers. Also, sometimes it connects, holds the connection for just a few seconds and then disconnects. My SGS and Nexus One work as expected, as does the iPhone, so it doesn't appear to be an issue with the car.
Seems like a bug in the NS to me.
I'm curious if others are streaming audio/music to their auto's BT system without issues?
It would be especially nice to know what anyone else with a new Ford/Lincoln is experiencing, but I'd also like to compile a list of what cars work and what don't.
I'm going to have to find some other BT device that I can test the stream on to see if my phone works with it or not. Maybe my Nexus One dock? I've never used that to stream audio even with the Nexus One.
In terms of troubleshooting my problem, I've already rebooted the phone and the car, un-paired and re-paired the phone with the car.
I've got a Mazda RX8 R3 and the NS will pair with the in-built car BT but drops the connection after a few minutes. It then refuses to connect again unless I re-pair, then a few minutes later it drops and we're back to square one.
The car's in-built BT worked fine with my HTC Desire, Hero, iPhone 3G and Blackberry 9700 so I'm guessing the Nexus S has a Bluetooth issue.
Mine works fine on my aftermarket Sony receiver.
having issues with bluetooth audio too, stream keeps breaking every now and then. Any fixes?
I've only streamed to the car stereo and had no issues. The phone is only about 10cms away.
Haven't tried my BT headphones yet, maybe range is the issue.
*On original ROM.
Mujja said:
I've only streamed to the car stereo and had no issues. The phone is only about 10cms away.
Haven't tried my BT headphones yet, maybe range is the issue.
*On original ROM.
Click to expand...
Click to collapse
tried placing the phone right next the the BT reciever and same problem. Only tried this once, maybe I'll try rebooting the phone.
no problem here
using Bionix 1.2
You're lucky, I can't even get BT music streaming to work with my car. No other BT devices to check with besides my Nexus One dock, which has no speakers.
BT works great for the phone, though, to make and receive calls.
Problem with Bluetooth
I cant get to work bluetooth on Nexus S.
When i enable it and try to send something from SGS to Nexus S it says me "This tranfer was canceled by the user" (Nexus S)
SGS says "Remote device rejected your request"
When i try send something from Nexus S, but use not function Send, i use function Bluetooth - it says me "The application Bluetooth Share (process com.android.bluetooth) has stopped unexpectedly. Please try again"
I tried factory reset, wipe cache, tried flash any other roms, but got NOTHING helpt me. I have this problem on 2 phones (2xNS).
Can someone give me files of BlueTooth share? (com.android.bluetooth)
That's an interesting problem you have. Mine did the same thing transfering from my computer to my NS. I just tried it again when I read your post (to make completely sure what the error was) and it has automagically fixed its self.
Well, seems i need a file \system\app\bluetooth.apk
Hi everyone,
has anyone experienced problem with blue-tooth pairing on the Nexus 5. My problem basically is that every time i jump in the car i receive a BT pairing request. EVERY TIME! it sound like it is not saving the pairings... Didn't have that problem with my Galaxy S2. Im this close on returning the phone... problem after problem... Blue-tooth, Camera, crappy Speaker, Low Volume, screen colors. phone reboots, software crashes... geezz! sorry that was me venting...!!
im running completely stock firmware other than root...
I've paired my phone with two cars. On the first, the car requested contacts and history and I said no. This was asked about 3 or 4 times. Hasn't asked since.
When I paired with the second car, I continued to get the request for history/contacts...but from the first car's bluetooth ID. Over and over and over. Haven't gone back to see if it still happens though.
EDIT for UPDATE:
Just tried second car again and problem solved. As for your problem, have you looked at the car bluetooth settings?