I'm trying to flash a prl told my triumph but it keep saying online connection not available....... any special tricks on this phone?
Sent from my ADR6400L using xda premium
Make sure the phone has usb debugging on and not in usb storage mode. i can't remember if you need drivers or not. You also need you MSL (SPC whatever you want to call it), and open it and it should detect your phone on a port and it should be the serial number I believe.
It is on usb debuging & I have my msl but still nothing
Sent from my ADR6400L using xda premium
What rom are you trying the PRL swap from ? This should help http://forum.sdx-developers.com/?topic=19189.msg244594#new
jaaydogg said:
What rom are you trying the PRL swap from ? This should help http://forum.sdx-developers.com/?topic=19189.msg244594#new
Click to expand...
Click to collapse
Cm7 TG beta with whyzor kernel. Also, I tried doing it on stock rom & nothing. The link says access denied
Sent from my ADR6400L using xda premium
Denied? Ok well go to sdx developers & in the download section go to the triumph guides & tips section & look at the PRL swap guide, use that method from stock with anycut to hold the port open
---------- Post added at 09:28 AM ---------- Previous post was at 09:26 AM ----------
You have to do it from stock then flash back to CM7 & the PRL will come with
jaaydogg said:
Denied? Ok well go to sdx developers & in the download section go to the triumph guides & tips section & look at the PRL swap guide, use that method from stock with anycut to hold the port open
---------- Post added at 09:28 AM ---------- Previous post was at 09:26 AM ----------
You have to do it from stock then flash back to CM7 & the PRL will come with
Click to expand...
Click to collapse
When I tried to do it with stock rom I did it with anycut but the com shortcut wasn't there..... here's the error I get from qpst
Sent from my ADR6400L using xda premium
Out of curiousity, using a non stock recovery would it cause not to be able to flash the prl?
Sent from my ADR6400L using xda premium
No I did it with clockwork installed, on the stock rom open anycot choose select com port then create short cut, then open shortcut & switch it to diagnosis mode then then connect it to. OPST
There wasn't any com port option on my stock rom with anycut
Sent from my ADR6400L using xda premium
Flash the deoxed triumph rom don't know if it's on this site or not but I know it's at sdx developers in the triumph development section I know the shortcut is there that's how I did it.
EDIT: http://forum.sdx-developers.com/?topic=17478.0 here's the link
jaaydogg said:
Flash the deoxed triumph rom don't know if it's on this site or not but I know it's at sdx developers in the triumph development section I know the shortcut is there that's how I did it.
Click to expand...
Click to collapse
ok....I'm gonna search for the deoxed rom & try again.....I'll keep you posted.....
I posted a link for you in my last post
jaaydogg said:
I posted a link for you in my last post
Click to expand...
Click to collapse
Downloaded & flashed the deodexed rom and I still get the same error msg from qpst
Sent from my ADR6400L using xda premium
I reinstalled qpst & got it to work.......
Sent from my ADR6400L using xda premium
Mines on a hybrid PRL it's Verizon & sprint combined & my signal is awsome here is a download link if you're interested http://db.tt/9x3uTMk0
jaaydogg said:
Mines on a hybrid PRL it's Verizon & sprint combined & my signal is awsome here is a download link if you're interested http://db.tt/9x3uTMk0
Click to expand...
Click to collapse
hows the 3g speeds??
Yes it's a noticeable difference in 3g speed plus it's the best of both worlds Verizon & sprint roaming coverage
jaaydogg said:
Yes it's a noticeable difference in 3g speed plus it's the best of both worlds Verizon & sprint roaming coverage
Click to expand...
Click to collapse
Yea. Too bad VM doesn't have roaming support to make use of that.
Related
I know this may sound odd for.some but important asking cause everything i tried seems not to work so i can i get some help maybe some step be step instructions.please don't nobody has to be a smart ass also if somebody would be willing to make a video that would be nice.....
Sent from my SCH-I510 using XDA Premium App
Are you trying to root from stock ee4? The question was a little vague and I want to make sure before typing it all out.
Sent from my SCH-I510 using XDA App
Yes that's what im trying to do
Sent from my SCH-I510 using XDA Premium App
I think there is a rooted stock ee4 in the development section. Let me see if I can find it. I think you would then just install using Odin with is in a sticky at the top.
---------- Post added at 12:22 PM ---------- Previous post was at 11:47 AM ----------
Why do you want rooted stock ee4? To debloat?
http://forum.xda-developers.com/showthread.php?t=1121201
Found this but seems like alot to go through just for root. Easier to find a debloated version and just add back in what you want. Im still new at this myself.
If you are only worried about root and do not want to flash a custom ROM you only need to:
1. Download CWM from this forum: http://forum.xda-developers.com/showthread.php?t=1112804.
2. Flash it to your phone using odin, make sure you selct PDA and uncheck auto-reboot. When finished boot straight into recovery just to make sure everything worked.
3. Install superuser from the market or download the .apk and flash through cwm. =)
That's it, if you have any questions about how to use odin please refer to this thread: http://forum.xda-developers.com/showthread.php?t=1160580
Knew there was an easier way lol. Guess I learned another thing for today.
Thanks important bout to try ima update when important done
Sent from my SCH-I510 using XDA Premium App
deedomond said:
Thanks important bout to try ima update when important done
Sent from my SCH-I510 using XDA Premium App
Click to expand...
Click to collapse
Got to love T9. Haha.
i hate t9 i always do that
You're not the only one man. Dont worry about it.
Sent from my SCH-I510 using XDA App
I tried those steps it didn't work for me
Sent from my SCH-I510 using XDA Premium App
did you get an error on a part or where did things stop working?
It said complete but wen i wen i downloaded superuser it said i wqsnt rooted
Sent from my SCH-I510 using XDA Premium App
Not sure if you can achieve root on this phone without a custom kernel.
As far as I'm aware if you do go with a custom kernel when Verizon releases an update you will need to revert back to stock to be able to receive it.
If that's ok with you go here http://forum.xda-developers.com/showthread.php?t=1205428 and follow steps 1, 2a ,2b. you'll be sitting rooted and stock at that point. if you go with the pbj voodoo kernel (i'm using it) it will give you root and speed your phone up quite a bit. after that just download superuser from the market and go nuts.
Erikmm just keep on bringing the good stuff thanks for this! !! Mokee questions & answers thread.
Sent from my SGH-T959V using XDA App
Lol eh I do what I can, just trying to give people options on what roms to run as a daily driver. I'm still on mokee its nice and smooth and with the ics theme looks like ics lol.
Also, I will be adding more roms to that thread of different miui like roms
sent from the BatCave
Is this a light weight rom like joyos?
eollie said:
Is this a light weight rom like joyos?
Click to expand...
Click to collapse
What do you mean by lightweight? Lol it has alot more tweaks and features if that's what you mean
sent from the BatCave
erikmm said:
What do you mean by lightweight? Lol it has alot more tweaks and features if that's what you mean
sent from the BatCave
Click to expand...
Click to collapse
And it's ICS likey, not iPhone-ish...Mayb old-fashioned M4x will like this than JoyOS huh ...Go for ICS-ish lol
And is anyone else or just me feeling a little bit laggy when pressing power button to go into power menu? and laggy when going to any menu in the power menu like reboot or sth?
And am I wrong or there is not a file explorer app by default :? :" (tell me I am wrong :s) and I have no root permission when using titanium :s...but the busybox installer said I am rooted @@...guess there's somthing wrong w my phone eh :?
I think he mean as in small file size
Could some one please post a link on how to flash this rom or do I just do it through cwm like other roms
Sent from my SGH-T959V using xda premium
Mokee comes with no file explorer but I'll put one in the next update as for root if your having trouble just download superiser app from play store and you'll be good
erikmm said:
Mokee comes with no file explorer but I'll put one in the next update as for root if your having trouble just download superiser app from play store and you'll be good
Click to expand...
Click to collapse
You should put on Solid Explorer, it's really nice
Sent from my SGH-T959V using xda premium
Liking the rom. Only thing Im finding is you have to install superuser. E'ffin FB has me liking supersu and it would not acquire root access. Installed superuser then give supersu #su and uninstalled superuser.
Also my initial install was missing things like status bar, settings and such. Did a F/S/D/W and reflashed the rom everything was fine.
Some menus still have Chinese kinda wish I knew how to read it.
---------- Post added at 12:24 PM ---------- Previous post was at 12:19 PM ----------
erikmm said:
What do you mean by lightweight? Lol it has alot more tweaks and features if that's what you mean
sent from the BatCave
Click to expand...
Click to collapse
Shortbus-Driver said:
I think he mean as in small file size
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Yeah I was meaning in file size.
CM7 to this
I'm currently on CyanogenMod 7.2.0 RC1 R10. Do i need to do anything special to install this or can i just flash the .zip?
Ive wondered the same, do we have to do the efs backup and restore or can we just wide data and flash?
Sent from my SGH-T959V using xda premium
I would do it just for safety reasons. Always better to be safe then sorry.
eollie said:
Liking the rom. Only thing Im finding is you have to install superuser. E'ffin FB has me liking supersu and it would not acquire root access. Installed superuser then give supersu #su and uninstalled superuser.
Also my initial install was missing things like status bar, settings and such. Did a F/S/D/W and reflashed the rom everything was fine.
Some menus still have Chinese kinda wish I knew how to read it.
---------- Post added at 12:24 PM ---------- Previous post was at 12:19 PM ----------
Yeah I was meaning in file size.
Click to expand...
Click to collapse
Superuser is a known issue idk why the one built in the ssettings doesn't work but ill look into it. As for the Chinese ill decompile the settings and try n translate the chinese.
for cm people I would back up ur efs to the desktop just in case and still do efs backup flashable
sent from the BatCave
Juls317 said:
Ive wondered the same, do we have to do the efs backup and restore or can we just wide data and flash?
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
Wipe data flash .zip. Working fine so far.
You don't need to do the efs-backup if you have the .tar on your sdcard
And I concur with Erik, having your efs-backup.tar and the md5 saved to your comp is a very good idea
The steps I took to make sure I didn't have any probs was from recovery (already on mtd) factory/ data reset, format system, flash efs-restore.zip, flash ROM, reboot and let cook/ bake...
Sent from my SGH-T959V using XDA
im kind of having problems with text messages. when i sent a text, the other person doesnt recieve it, but other well recieve the message but not one person, i dont know if its a ROM issue or what...anyone else having this problem too??
help
so i tryed to flash this rom and I got no data connection so i hope some one can help me out or let me know how to go back to the a non mdt rom
i cant mount ext 4 on moKeeOS is anyone else having this problem? or is there a fix to this?
Sent from my SGH-T959V using XDA
Sent from my SGH-T959V using XDA
ChadBFlores said:
i cant mount ext 4 on moKeeOS is anyone else having this problem? or is there a fix to this?
Sent from my SGH-T959V using XDA
Sent from my SGH-T959V using XDA
Click to expand...
Click to collapse
If I remember right then kernel needs to have ext enabled within.
I have made a package to flash modems to infuse 4g MTD roms. I will be posting the CWM flashable zips on this thread. Any modems posted after uclb3 will not be personally tested by me. I think I got this process down and dont need to test them. If you find one that doesn't work let me know.
BTW: These should work on ANY of the mtd roms for Infuse4g
Infuse 4G Orignal Modems
UCKD5: https://docs.google.com/open?id=0BwqDOlQAQYJATmdSTEliODdNWFE
UCKI3: https://docs.google.com/open?id=0BwqDOlQAQYJARXgtNXFPb1VqVEU
UCKI4: https://docs.google.com/open?id=0BwqDOlQAQYJAZHhVUjVsa2ZPNXM
UCKJ1: https://docs.google.com/open?id=0BwqDOlQAQYJAODBXOV9oR3hrR1E
UCKJ2: https://docs.google.com/open?id=0BwqDOlQAQYJAa2R0SUxQYVRZdTg
UCKJ3: https://docs.google.com/open?id=0BwqDOlQAQYJAOUV0ZlV6U005YnM
UCKJ4: https://docs.google.com/open?id=0BwqDOlQAQYJAc2U0VUM5R0NTNVk
UCKJ5: https://docs.google.com/open?id=0BwqDOlQAQYJAeDViN2tMV2k5ODA
UCKK1: https://docs.google.com/open?id=0BwqDOlQAQYJAYWg5bGVzYW9ndjA
UCKK2: https://docs.google.com/open?id=0BwqDOlQAQYJAZmNucC1kT3RTTms
UCKK3: https://docs.google.com/open?id=0BwqDOlQAQYJAaFRJN0p1LU9WQzA
UCKK4: https://docs.google.com/open?id=0BwqDOlQAQYJAbHAyMVhlTDhVLWM
UCKL2: https://docs.google.com/open?id=0BwqDOlQAQYJARFlLUlhpZmVrSnM
UCLB1: https://docs.google.com/open?id=0BwqDOlQAQYJAV3dFZUEwUmdESFE
UCLB3: https://docs.google.com/open?id=0BwqDOlQAQYJAcUxFV1dYNFdMTDQ(Just in case you want to go back to UCLB3 without reflashing rom. This is now the package with uclb3 from cm10.)
SGS 4G Modems for Infuse 4G MTD
UVKB5: https://docs.google.com/open?id=0BwqDOlQAQYJAcENyQ3RJUkNsbjg
UVKC1: https://docs.google.com/open?id=0BwqDOlQAQYJATEFGb1BnYThFRm8
UVKD1: https://docs.google.com/open?id=0BwqDOlQAQYJATjhHWGFKZ0ZmYnM
UVKF1: https://docs.google.com/open?id=0BwqDOlQAQYJAUmRmcU42b0lnMDA
UVKF2: https://docs.google.com/open?id=0BwqDOlQAQYJAcEVaYW1faVh4VWs
UVKG4: https://docs.google.com/open?id=0BwqDOlQAQYJASjJTTERmcENuSWM
UVKG6: https://docs.google.com/open?id=0BwqDOlQAQYJAYXJ6THNJc2RlbnM
UVKH1: https://docs.google.com/open?id=0BwqDOlQAQYJAVmRVdkNmM1BLZ3c
UVKH2: https://docs.google.com/open?id=0BwqDOlQAQYJAeDgzQ0VHWXdxclU
UVKI1: https://docs.google.com/open?id=0BwqDOlQAQYJAT1g3RmRlZnRKZTQ
UVKI3:https://docs.google.com/open?id=0BwqDOlQAQYJAdUh3N29hRXBUaE0
UVKJ1: https://docs.google.com/open?id=0BwqDOlQAQYJAMC1FbUI3WklzTmc
UVKJ2: https://docs.google.com/open?id=0BwqDOlQAQYJAZzlOcnR3cm1uaVU
UVKJ3: https://docs.google.com/open?id=0BwqDOlQAQYJAZkJCOEFBV2NqYUE
UVKJ5: https://docs.google.com/open?id=0BwqDOlQAQYJAWlhQWEo5dnkyT1E
UVKJ6: https://docs.google.com/open?id=0BwqDOlQAQYJAYjVKbno3akFQSjQ
Rogers Infuse Modems
UXKG3: https://docs.google.com/open?id=0BwqDOlQAQYJAckk4aXdHQklvUkE
Sorry about the download confusion guys, hazard66 is correct go to file then click download, you should download zip file.
I can't vouche for performance of these. I only tested a few and just to see that they get signal lock. I have been running uckk1 for a good while now, it seems to perform as it did on ics.
I updated my UCLB3 package to include the exact same version that is in scott hart's cm10. Thanks go out to scott for allowing me to pull it from his rom. [ROM][JellyBean][4.1.1]Unofficial CM10 - Updated CM10 8/31 Butter - MTD - OC Kernel
The SGS 4G modems I pulled from this thread: http://forum.xda-developers.com/showthread.php?t=1192436. They needed to be padded like the infuse modems and put in my installer pack.
I now realize that I might be stepping on toes rereleasing some of these. So, if you feel I owe you credit for one of these modems just PM me and I would gladly give you credit for your great good work. Although I had to change these modems so it doesn't resemble your modem much.
One more thing DO NOT try to flash these on any BML rom(Pre jellybean so far, Although I'm hearing that there may be MTD ICS soon). They will not work.
All of the Infuse modems above (besides UCKD5) I got from here: http://forum.xda-developers.com/showthread.php?t=1342978
Can't download. All I see are the files inside the zip. What am I doing wrong?
Planning my escape!
Truckerglenn said:
Can't download. All I see are the files inside the zip. What am I doing wrong?
Planning my escape!
Click to expand...
Click to collapse
goto the file dropdown menu and select 'download' at the bottom
took me a secone too
Truckerglenn said:
Can't download. All I see are the files inside the zip. What am I doing wrong?
Planning my escape!
Click to expand...
Click to collapse
Upper left hand corner by modem name: File - download
Using the JB browser that menu doesn't come up. But, if you bring up it's options, you select Request Desktop, then the file menu shows up.
Planning my escape!
to dl from your phone tick "request desktop site" in whatever browser you are using
General suggestion and question:
Even though modem usage and efficiency vary per user, if possible, can general descriptions of each modem's attributes be included in the OP for newbs like me? Thanks!
Sent from my SGH-I997 using xda app-developers app
+1
Rayk1080 said:
General suggestion and question:
Even though modem usage and efficiency vary per user, if possible, can general descriptions of each modem's attributes be included in the OP for newbs like me? Thanks!
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
+1 just another newbie
I'll also like to know what we 'll be expecting after flashing any of these. will like to try and test but have some use case in hand will help.
Thanks for the quick turnaround on these.
Sent from my SGH-I997 using xda premium
blscallions said:
I have made a package to flash modems to infuse 4g MTD roms.
Click to expand...
Click to collapse
You may want to post a link to the modem thread so people can read the particulars about each modem.
Sent from my SGH-I997 using xda app-developers app
Thank you sir! Not sure why but uclb3 kills my battery.
Sent from my SGH-I997 using xda app-developers app
NIce work. I was looking for new modem
Sent from my SGH-I997 using xda app-developers app
I'll try to add all the modems from here: http://forum.xda-developers.com/showthread.php?t=1342978. I might try to convert modems from other phones too.
csandman1977 said:
Thank you sir! Not sure why but uclb3 kills my battery.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
I will look into the battery drain on uclb3.
blscallions said:
I will look into the battery drain on uclb3.
Click to expand...
Click to collapse
Since you found the problem, you want to test a new version of uclb3 for me csandman1977?
blscallions said:
Since you found the problem, you want to test a new version of uclb3 for me csandman1977?
Click to expand...
Click to collapse
I have the issue and happy to test.
Sent from my SGH-I997 using xda premium
Yeah I'll test. Got a couple days off from work so I have time to play.
Sent from my SGH-I997 using xda app-developers app
csandman1977 said:
Yeah I'll test. Got a couple days off from work so I have time to play.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
Try the new uclb3 that i posted on my thread. let me know how it does. i took that one directly from cm10. Same to you marty331 just posted new uclb3. Might have a captivate modem to try soon.
blscallions said:
Try the new uclb3 that i posted on my thread. let me know how it does. i took that one directly from cm10. Same to you marty331 just posted new uclb3. Might have a captivate modem to try soon.
Click to expand...
Click to collapse
Okay I'm downloading it now.
Sent from my SGH-I997 using xda premium
Sent pm bls
Sent from my SGH-I997 using xda app-developers app
Hey guys my girlfriend has been using this phone for about a year. She is finaly ready to have me root it and flash a smother rom than stock.
I was wondering what was the most stable rom out there.? She will not flash a bunch of roms or anything... Its more of a one time deal...
Sorry what's the smoothest stable rom?
Thanks guys!
Sent from my EVO using xda premium
Stock is the most functional, but if you're wanting a flash it and leave it kind of ROM, stick with CM7
Sent from my LG-P999 using xda premium
Really depends. CM7 based are my favorite, but if you want BT calling, than rooted stock is the only way. Unless you wanna jump through hoops to downgrade your BB from the March BB. Assuming tthat's what your on. Ivetried tons of ROMs. CM9/10 based are not stable as a daily driver ROM. Eaglesblood and Hellfire v2.3 GB and taemsek build 135.1 are very good CM7 roms.
Its really dependant on what you need the phone to do.
Sent from my pimped LG G2x temasek build 135.1 w/Trinity Kernel --The Best G2x GB Solution
I was just about to post this same question because my girls been running miui that I set up for her for like 4 months and wants something more stable.. I'm gonna try out hellfire for her... I'm not familiar with g2x whatsoever cuz I have a gs2 so I hope everything goes well.
Sent from my SGH-T989 using xda app-developers app
I'm using the evo 4g lte so I don't know crap about this phone either lol
She just needs a stable rom.. Bluetooth calling does not matter because should never use it... So I'm guess I should go with a cm7 rom.. What the most stable one?
I would assume this pho e would have all kinds of stable stuff being as it's been out so long.. I am going to guess lg does not put out any drivers? I have never owned a lg phone so I'm only guessing.
Sent from my EVO using xda premium
v3rsatile23 said:
I was just about to post this same question because my girls been running miui that I set up for her for like 4 months and wants something more stable.. I'm gonna try out hellfire for her... I'm not familiar with g2x whatsoever cuz I have a gs2 so I hope everything goes well.
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Which Hellfire? If you want stability don't flash Hellfire Sandwhich. Flash Phenoix v.2.2/2.3 (2.3 is what I use the most as a daily driver, until build 135 nightly came along)
Than I would flash fauxs 050 kernel. I have some issues with 051 kernel.
Just my 2cents.
---------- Post added at 04:24 PM ---------- Previous post was at 04:22 PM ----------
NissanNick said:
I'm using the evo 4g lte so I don't know crap about this phone either lol
She just needs a stable rom.. Bluetooth calling does not matter because should never use it... So I'm guess I should go with a cm7 rom.. What the most stable one?
I would assume this pho e would have all kinds of stable stuff being as it's been out so long.. I am going to guess lg does not put out any drivers? I have never owned a lg phone so I'm only guessing.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Two flavors of CM7 I love:
Hellfire Phenoix v2.3 w/ faux 050 kernel
OR
temasek build 135.1 w/Morfics Trinity Kernel
Gonna try hellfire 2.3 but I read somewhere you need the new baseband version??? I have no idea if she has that. Or is it included in the rom?
Sent from my SGH-T989 using xda app-developers app
v3rsatile23 said:
Gonna try hellfire 2.3 but I read somewhere you need the new baseband version??? I have no idea if she has that. Or is it included in the rom?
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Goto Settings, About Phone, scroll down to baseband version, does it say in the number March 11, 2012, or a Date I believe Jul 15, 2011.
If you have March 2012, you will need to flash newbaseband.zip as well after you flash the ROM, it's simple.
Here is hotlink for newbaseband. It is not included in the ROM, most of them don't offer it but it's a simple flash n' fix.
Soo,
Do your full wipes,
Flash ROM
Flash Kernel (if not wanting CM7 stock)
Flash newbaseband.zip
flash gapps (if you'd like, I never do anymore cause I use a handful of G Apps.)
Reboot-enjoy!
Oh okay... Would it still work without the new bb?? Where can I find that zip??
Sent from my SGH-T989 using xda app-developers app
v3rsatile23 said:
Oh okay... Would it still work without the new bb?? Where can I find that zip??
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
oops linky--> http://owain.hopto.org/T-Mobile LG...w_baseband.zip
without it you will get clicks in your call Audio, won't be able to make calls.
If your on the March 2012 baseband, you need this!
justjackyl said:
oops linky--> http://owain.hopto.org/T-Mobile LG...w_baseband.zip
without it you will get clicks in your call Audio, won't be able to make calls.
If your on the March 2012 baseband, you need this!
Click to expand...
Click to collapse
You mean if you're not on the March 2012 bb?? Also the link says 404 not found?? Yeah I looked on her phone and she's on the July 15 bb... So the new March 2012 bb is imperative right?? Sorry I just want to be sure I get this right.
Sent from my SGH-T989 using xda app-developers app
---------- Post added at 04:46 PM ---------- Previous post was at 04:24 PM ----------
What about v2.2 I kinda don't want to mess with the bb..
Sent from my SGH-T989 using xda app-developers app
v3rsatile23 said:
You mean if you're not on the March 2012 bb?? Also the link says 404 not found?? Yeah I looked on her phone and she's on the July 15 bb... So the new March 2012 bb is imperative right?? Sorry I just want to be sure I get this right.
Sent from my SGH-T989 using xda app-developers app
---------- Post added at 04:46 PM ---------- Previous post was at 04:24 PM ----------
What about v2.2 I kinda don't want to mess with the bb..
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
If shes on the old baseband, there's no need fix anything, but if you flash a new rom, and get a clicking sound, check the general sticky section or my sig to get things sorted out.
Your good to flash either version on her baseband.
Sent from my LG-P999 using xda app-developers app
Thanks guys.. Will try it out
Sent from my SGH-T989 using xda app-developers app
Good luck! I just flashed back to rooted stock myself.
Sent from my LG-P999
I bricked her phone -_-
Sent from my SGH-T989 using xda app-developers app
Your never bricked. Let me find you a rescue thread.
Sent from my LG-P999 using xda app-developers app
---------- Post added at 02:22 PM ---------- Previous post was at 02:17 PM ----------
Start here. Just act like your starting over. Always use CWM never ROM manager. Links under this post will get you everything you need. Curious, where you stuck at?
Linky : http://forum.xda-developers.com/showthread.php?t=1060715
[REF][Guide/Tutorial] Getting Started Modding Your T-Mobile G2x
Sent from my LG-P999 using xda app-developers app
---------- Post added at 02:24 PM ---------- Previous post was at 02:22 PM ----------
Btw i bricked last night and am back after 15 min. You'll get it.
Sent from my LG-P999 using xda app-developers app
I'll try it out when I get off work.. Basically I was going to download the rom from rom manager because I didn't want to search through threads on her stock browser since she didn't have the xda app and I couldn't download the file on my computer and transfer to her phone because her rom wouldn't let her mount usb because miui sucks. So I downloaded the rom from rom manager then I was going to just boot into recovery and flash manually. But rom manager said there was no recovery and that I needed to install one so I let rom manager do that for me.. I downloaded the rom and then rebooted into recovery to flash I was surprised that the font was orange because it used to be blue on her phone. I noticed the cwm version and it was one I've never used or seen anyone use. So first thing I did was factory reset then wiped cache and dalvik. Now I took an extra step and formatted system because I do that on twrp on my gs2. So everything wiped and I go to install from sd card to locate the file to flash and all that's there is dcim and data... Nothing else. I though maybe because I formatted system?? I tried turning off the phone then getting back into recovery and it was the same... Nothing showing up on install from sd. Now I'm freaking out because I go to restore the nandroid from her original stock rom and nothings there either. I already wiped with no option to let me install anything now I don't know what to do. Was it that stupid recover I flashed that is unstable or was it because I formatted system?? I should of checked to see if her internal and external popped up in recovery on install from sd card but didn't think to do so cuz I never had that problem.... I'm ****ed.
Sent from my SGH-T989 using xda app-developers app
v3rsatile23 said:
I'll try it out when I get off work.. Basically I was going to download the rom from rom manager because I didn't want to search through threads on her stock browser since she didn't have the xda app and I couldn't download the file on my computer and transfer to her phone because her rom wouldn't let her mount usb because miui sucks. So I downloaded the rom from rom manager then I was going to just boot into recovery and flash manually. But rom manager said there was no recovery and that I needed to install one so I let rom manager do that for me.. I downloaded the rom and then rebooted into recovery to flash I was surprised that the font was orange because it used to be blue on her phone. I noticed the cwm version and it was one I've never used or seen anyone use. So first thing I did was factory reset then wiped cache and dalvik. Now I took an extra step and formatted system because I do that on twrp on my gs2. So everything wiped and I go to install from sd card to locate the file to flash and all that's there is dcim and data... Nothing else. I though maybe because I formatted system?? I tried turning off the phone then getting back into recovery and it was the same... Nothing showing up on install from sd. Now I'm freaking out because I go to restore the nandroid from her original stock rom and nothings there either. I already wiped with no option to let me install anything now I don't know what to do. Was it that stupid recover I flashed that is unstable or was it because I formatted system?? I should of checked to see if her internal and external popped up in recovery on install from sd card but didn't think to do so cuz I never had that problem.... I'm ****ed.
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Boom, there's your problem, do not use rom manager, you have to use nvflash to get recovery. Search for oneclicknvflasher to get cwm. You need a computer, and download the LG USB g2x drivers, use Google for that. You can never brick this phone.
Sent from my LG-P999 using xda app-developers app
noahk423 said:
Boom, there's your problem, do not use rom manager, you have to use nvflash to get recovery. Search for oneclicknvflasher to get cwm. You need a computer, and download the LG USB g2x drivers, use Google for that. You can never brick this phone.
Sent from my LG-P999 using xda app-developers app
Click to expand...
Click to collapse
Okay I'm going to tackle it tonight.. Thanks a lot man. Fck rom manager!!! I'll report back.
Sent from my SGH-T989 using xda app-developers app
I found the thread telling how to enable all lte modes which gave the handy dandy msl reader app and that's all well and good, but I can't seem to find where the manual prl update is :/ I've found it on the og evo and my S3 but it don't see it in the ##data# menu on this bad boy. Am I just blind? If so please braille it out for me (and I mean absolutely no offense to the vision impaired, just trying to be funny)
sent from my S5
heard people using PRL Helper
Haven't tried it myself, but you need root to use it.
I just use Roam control to force roaming.
bobdylan21221 said:
heard people using PRL Helper
Haven't tried it myself, but you need root to use it.
I just use Roam control to force roaming.
Click to expand...
Click to collapse
If u run rddt nd2 1.1 this now a feature . My lte is more stable with my current prl .
Sent from my SM-G900P using XDA Premium 4 mobile app
lballer69 said:
If u run rddt nd2 1.1 this now a feature . My lte is more stable with my current prl .
Sent from my SM-G900P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Please forgive me, but what is rddt n2 1.1?
sent from my S5
Nvm lol I'm a moron rooted deodexed etc etc
sent from my S5
youdoofus said:
Nvm lol I'm a moron rooted deodexed etc etc
sent from my S5
Click to expand...
Click to collapse
As of now there isn't a flash able mod yet ......
Sent from my SM-G900P using XDA Premium 4 mobile app
PRL write works!!!
in the rom mentioned above, the write PRL option is there when you hit ##data# and then select view. Just scroll down a bit and youll see write prl. I just did it, verified working. Data speeds now faster thank you for the ROM suggestion!!
Prl helper does not work on stock rooted