[TuT] How to root n unroot ur phone in simple steps..!!! - Samsung Galaxy Fit GT 5670

Hello guyzz ...!!!
Here r 2 link plz follow d steps correctly thete is no need of data wipe or sumthing...!!!
***download d file from d link given bellow which contain file to root ***
www.mediafire.com/?awcjdi3062zemd8
***download d file from d link given bellow which contain file to unroot***
http://www.mediafire.com/?5o3b50brppmszwn
***************For both d method is same******************
copy it to your root of sd card (not in any folder)
then boot into recovery mode
+++how to go in recovery mod+++
1.switch off ur mobile
2.switch on with this butttons hold 2geather
power+home button together
3.then chooses apply root.zip from sdcard and your sd card is formated.
4.Reboot your phone,
n
5.cheak d option or app called as superuser...
its rooted now...
For unrooting follow d same steps but just choose unroot.zip insted of root.zip
This has been tested n will work on any Gingerbread FIRMWARE
ENJOY..........!!!

thanx a lot bro

rajrocks said:
Hello guyzz ...!!!
Here r 2 link plz follow d steps correctly thete is no need of data wipe or sumthing...!!!
***download d file from d link given bellow which contain file to root ***
www.mediafire.com/?awcjdi3062zemd8
***download d file from d link given bellow which contain file to unroot***
http://www.mediafire.com/?5o3b50brppmszwn
***************For both d method is same******************
copy it to your root of sd card (not in any folder)
then boot into recovery mode
+++how to go in recovery mod+++
1.switch off ur mobile
2.switch on with this butttons hold 2geather
power+home button together
3.then chooses apply root.zip from sdcard and your sd card is formated.
4.Reboot your phone,
n
5.cheak d option or app called as superuser...
its rooted now...
For unrooting follow d same steps but just choose unroot.zip insted of root.zip
This has been tested n will work on any Gingerbread FIRMWARE
ENJOY..........!!!
Click to expand...
Click to collapse
what about deoxeding?

uzairpandith said:
what about deoxeding?
Click to expand...
Click to collapse
Hey man.. just Check what about this thread meant to be??? Its about rooting and unroot your phone... deodex.???
You've been in a wrong threads dude...

btw rajrocks the unroot isnt workin

sd card formatted?!?

Related

flashble Clockwork mod recovery

WARNING
i will not responsible for any damage caused to ur phone by flashing this recovery!!!!
DO AT UR OWN RISK
hi friends,,
here is clockwork mod recovery which is flashble through default Android recovery
working 100%
INSTRUCTIONS (for noobs )
1)download this .zip file and put it in Ur root of sd card and not in any folder!!!
2) now switch of ur phone
3)in swich off mode press the power key and home key together until the phone starts
4)this will bring you in default android recovery (if you have not flashed any other recovery)!!!!
5) now here touch will not work so ok/enter action will performed by home key, up-down action will be performed by volume keys..
6)now go to the option- "apply udates from sd card" and press home key.
7) this will bring you in sd card and now select this flashable zip file and press home key then u will be warned that- do not do this!! ingnore warning press yes, then recovery will apply the zip file updates...
its done !!!!
what does IT DO????
only replaces ur default recovery by clockwork mod recovery!!!!
DOWNLOAD HERE
thanks to mr. Tj_styles for making this recovery for galaxy fit...
press thanks button if i helped you!!!
kkkk.....its cool
Did any one tried
Did long before.....
sarvesh563 said:
WARNING
i will not responsible for any damage caused to ur phone by flashing this recovery!!!!
DO AT UR OWN RISK
hi friends,,
here is clockwork mod recovery which is flashble through default Android recovery
working 100%
INSTRUCTIONS (for noobs )
1)download this .zip file and put it in Ur root of sd card and not in any folder!!!
2) now switch of ur phone
3)in swich off mode press the power key and home key together until the phone starts
4)this will bring you in default android recovery (if you have not flashed any other recovery)!!!!
5) now here touch will not work so ok/enter action will performed by home key, up-down action will be performed by volume keys..
6)now go to the option- "apply udates from sd card" and press home key.
7) this will bring you in sd card and now select this flashable zip file and press home key then u will be warned that- do not do this!! ingnore warning press yes, then recovery will apply the zip file updates...
its done !!!!
what does IT DO????
only replaces ur default recovery by clockwork mod recovery!!!!
DOWNLOAD HERE
thanks to mr. Tj_styles for making this recovery for galaxy fit...
press thanks button if i helped you!!!
Click to expand...
Click to collapse
Hey I have posted it long time before...
adityam533 said:
Hey I have posted it long time before...
Click to expand...
Click to collapse
ur recovery was for gmini.. also it can not flash cynamobile and much more roms and updates....
straight way saying there is mismatch of md5 sums in ur recovery
sarvesh563 said:
ur recovery was for gmini.. also it can not flash cynamobile and much more roms and updates....
straight way saying there is mismatch of md5 sums in ur recovery
Click to expand...
Click to collapse
Ya..Ur RECOVERY IS A CRAP!...
sarvesh563 said:
ur recovery was for gmini.. also it can not flash cynamobile and much more roms and updates....
straight way saying there is mismatch of md5 sums in ur recovery
Click to expand...
Click to collapse
lol coz of ur recovery i downloaded one 132 MB rom 3 times .. thought there was error in rom ... !!

[GUIDE]Root Qmobile Noir A2 Classic

Today I will tell you how to root one of the quite hard to root phones Qmobile Noir A2 Classic
WARNING:
- I am not responsible for bricked phones
- This tutorial will remove all data from your phone! Be sure to backup your phone book,messages,etc
- This Tutorial is for Qmobile Noir A2 Classic ONLY
Things To Download :-
Adb Drivers http://ge.tt/2yL21VT
Mtk Root and Tools http://dfiles.ru/files/fmnok7ke7
Vcom Drivers
Windows 8 http://www.mediafire.com/?7yee2of64nhl947
WIndows 7/xp/vista http://www.mediafire.com/?cypm22rgs2k83ji
SP Flash Tool http://www.mediafire.com/?agsj3n4neniq054
Scatter File https://www.dropbox.com/s/je0alc5db8t66ld/MT6575_Android_scatter.txt
Super Su ttp://db.tt/owvX0f7t
ROM http://db.tt/n7RhDp0l
Preloader and dsp_bl https://www.dropbox.com/s/prdtpd8px8649yx/preloader and dsp.zip
NOTE:
Write down you imei somewhere (press *#06# on dialer)
You will be needing it
Method:
-Install all Drivers
-Put scatter file ,extract rom and preloader,dsp_bl in one folder (makes things quite easy) replace if asked
-Turn off phone
-Open Sp Flash tool open scatter file and select the scatter file u downloaded
-put tick on all files on sp flash tool and select its corresponding file (for eg "ANDROID" is system.img)
-Click Firmware Upgrade on sp flash tool and connect phone (turned off)
-It Will show error! Disconnect Phone
-Remove tick from all files
-Now put tick on "BOOTIMG" "UBOOT" "RECOVERY" "LOGO"
-Press Download button and connect phone again (remove battery this time)
-It Will show green circle showing success!
-Disconnect Phone and Turn on phone in recovery mode (Press Vol+ with power button)
-(to navigate in recovery mode press vol + to go up press vol - to go down and press power to enter selection)
TO MAKE BACKUP: in recovery mode enter backup and restore, and backup it will take few mins
TO COPY BACKUP: in recovery mode find mounts and storage and turn on usb mount and connect your phone to computer while being at that mode a removeable drive will show up copy the clockworkmod folder
Okay now listen carefully go to the folder where you downloaded the rom (the one you downloaded from me) find the file system.img
rename it to system.yaffs2.img
then go to the folder where you copied the backup to you will find also system.yaffs2.img there replace that file with the file from the rom (the one you renamed earlier) next open the file "nandroid.md5" with notepad delete all the text it has and save it
now copy this folder back to your phone (replacing the old folder) and the Super su zip u downloaded earlier reboot your recovery (after copying back the backup it is important) NOW:
- factory reset
- go to backup and restore -> advance restore ->restore system
- go to update from sd card and select the super su zip
- reboot your phone normally
After the reboot your phone will be rooted But your imei will be lost
Here what you will do restore your imei:
1. remove all sim cards from phone ,turn on the phone in normal mode and connect it
2. open mtk tools press root button it will ask you for some thing just click ok
3. Click replace imei and enter the imei numbers (can be found on phone box or back of phone)
4. Click ok reboot your phone check for updated imei numbers
And Congratulation Your Phone is Rooted
Credits
@najamahmedisb (testing)
@trm33 (testing)
@threatalive (created the thread resulting in this tutorial)
@rua1 (MTK Droid and Tools)
I can confirm that this method does not only root A2 Classic but it can also repair bricked A2 Classic :victory:
 @bilalz400 you may update the title, so the thread is easily accessible to people in need.
Awesome guide! :good:
I'll tell someone with this mobile if I come across one. People are using these alot since they're quality phones with reasonable prices.
when i press root button in MKT Droid Tool this error comes what should i do .....
--- ERROR : SU inaccessible
My phone is still with invalid imei
what should i do.....
could anyone plz provide me framework_res.apk(in system/framework) flashable need urgent<<<<thnkx in advance as fast as possible @bilalz400
RaoTayyab said:
when i press root button in MKT Droid Tool this error comes what should i do .....
--- ERROR : SU inaccessible
My phone is still with invalid imei
what should i do.....
Click to expand...
Click to collapse
Is you phone rooted do you have su in you app drawer? check again
najamahmedisb said:
could anyone plz provide me framework_res.apk(in system/framework) flashable need urgent<<<<thnkx in advance as fast as possible @bilalz400
Click to expand...
Click to collapse
Wow bro you mess you phone fast
Hows the quest for modding going on?
Contact @qmobilea2
He might help you in modding your phone
and for your file open mtk droid root and tools go to the root,backup and recovery section click unpack yaffs2 for the section and select system.img from the backup you used earlier this will extract the whole system.img and you will have all the system files you want to replace!
Sry for the late reply's i didnt checked the thread
bilalz400 said:
Is you phone rooted do you have su in you app drawer? check again
Click to expand...
Click to collapse
Yes phone is rooted and su was problem which i again installed after restarting phone... Then MKtdroid Tool replace imei numbers as you said above.....
Thank you very much... I am very happy with your work...... You are helping the newbies in the world of IT etc.... Thnx
RaoTayyab said:
Yes phone is rooted and su was problem which i again installed after restarting phone... Then MKtdroid Tool replace imei numbers as you said above.....
Thank you very much... I am very happy with your work...... You are helping the newbies in the world of IT etc.... Thnx
Click to expand...
Click to collapse
Very Happy to see your imei restored
can't copy backup
i can't move forward.... stuck at ''to copy backup''
removable drive is not showing..
please help me
thanks
simply root it with Vroot
This method is very complicated just simple root it with voot 1.7.2 sofware , you just all those drivers witch come with Q mobile software. Juts simple put mobile in dubugging mode , once sofware detected your mobile just simply press the Root button , your wmobile will restart once and its finally rooted . No need for all this stuff. I rooted my friend's A2 Classic with that method , if you want some screenshots i can provide that to.
Easy Rooting Method.
- I am not responsible for bricked phones
-and i am also not responsible if someone hit a bricked phone in your head
-don't worry your data remain safe :laugh::laugh:
Method:
first and first download the software from attached files below the post :good::good::good:
1) Install all the drivers (as the original post suggested ADB and VCOM )
2) turn USB debugging on.
3) Install the software , its in chinese but not very difficult to understand Just press the middle button once installed it should be looked like this (check the attachment )
4) press the button , let the software do its things, once your cell phone restart check the SU app in the drawer.
Caution: Do not Factory restore your phone after freezing apps or modification you will end up in a boot loop.
So what you do with this little Rooted device ?? duh off course make ext 4 partition on your SD Card and link your newly download aps using link2SD . no worrying of low space
AhsanKhaan said:
This method is very complicated just simple root it with voot 1.7.2 sofware , you just all those drivers witch come with Q mobile software. Juts simple put mobile in dubugging mode , once sofware detected your mobile just simply press the Root button , your wmobile will restart once and its finally rooted . No need for all this stuff. I rooted my friend's A2 Classic with that method , if you want some screenshots i can provide that to.
Click to expand...
Click to collapse
Well if it works that will be a huge bonus!
Sent from my A2_Classic using xda app-developers app
Adnan Farooq Chatha said:
i can't move forward.... stuck at ''to copy backup''
removable drive is not showing..
please help me
thanks
Click to expand...
Click to collapse
Use a memory card reader if removable disk does not appear
Sent from my A2_Classic using xda app-developers app
Also make sure u have a mem card in phone and it is detected if removeable disk does not appear than use mem card reader and copy backup to it
Sent from my A2_Classic using xda app-developers app
New framework etc.....
From files which us sent......having one problem this one.....which I p.m u
sent from my beast...
najamahmedisb said:
From files which us sent......having one problem this one.....which I p.m u
sent from my beast...
Click to expand...
Click to collapse
Bro i already looked into it and trying to fix it
don't post into this thread its a guide not a discussion one
root problem
hey can you help me how can I root my a2 classic?
it doesn't do anything in sp flash tool when I click frimware upgrade? or I click download?
bilalz400 said:
Also make sure u have a mem card in phone and it is detected if removeable disk does not appear than use mem card reader and copy backup to it
Sent from my A2_Classic using xda app-developers app
Click to expand...
Click to collapse
how to flash that stock rom qmobile noir i5 wt is that file type MTK6582_1408270534 filetype is GGoSaVoe plz tell me plz help me no forum for qmobile noir i5 thats why i posted here kindly tell me how to flash that stock rom on phone with which software
atir usman butt said:
how to flash that stock rom qmobile noir i5 wt is that file type MTK6582_1408270534 filetype is GGoSaVoe plz tell me plz help me no forum for qmobile noir i5 thats why i posted here kindly tell me how to flash that stock rom on phone with which software
Click to expand...
Click to collapse
Where did you got that file ?

[Q] PLEASE help me update captivate i897 to jelly bean, stuck on

I've been working on this for HOURS and I dont know whats wrong. My phone is rooted by the way. The steps say:
Download the following
1.[Firmware Download] CM10.2 Android 4.3 JB Firmware.
2. [Google Apps download] Google Apps on your Laptop/PC.
Part Two- (Final Steps of Upgrade for Captivate SGH-I897)
Download the above file into PC and Please don’t extract.
Now copy both firmware and google apps into SD card of your Captivate SGH-I897.
Now turn off your Captivate SGH-I897 .
Now restart your Captivate SGH-I897 in debugging mode (by Using Volume Down Key and Home Key together while switching on use Power button ).
Now it will give a warning, Press Volume Down to enter debugging mode.
When your Captivate SGH-I897 in recovery please select “wipe data factory reset” and “wipe cache partition“.
Then return to the main menu and select “Install Zip from SD card” and choose firmware zip file from SD card.
Now upload the file and apply installation.
When installation get over do same for google apps.
Wait till process complete of google apps.
Now return back to recovery menu and reboot Captivate SGH-I897 now.
Updation process is completed.
I am stuck on the bolded in red part. When I search for the firmware I cannot find it anywhere, I checked every folder I see. I even went back and pasted the link into a folder that was showing up when in recovery but then once in recovery, that folder is empty! I dont know why the files are hidden and I cannot install them.
Please help, anyone...
studentofknowledge said:
I've been working on this for HOURS and I dont know whats wrong. My phone is rooted by the way. The steps say:
Download the following
1.[Firmware Download] CM10.2 Android 4.3 JB Firmware.
2. [Google Apps download] Google Apps on your Laptop/PC.
Part Two- (Final Steps of Upgrade for Captivate SGH-I897)
Download the above file into PC and Please don’t extract.
Now copy both firmware and google apps into SD card of your Captivate SGH-I897.
Now turn off your Captivate SGH-I897 .
Now restart your Captivate SGH-I897 in debugging mode (by Using Volume Down Key and Home Key together while switching on use Power button ).
Now it will give a warning, Press Volume Down to enter debugging mode.
When your Captivate SGH-I897 in recovery please select “wipe data factory reset” and “wipe cache partition“.
Then return to the main menu and select “Install Zip from SD card” and choose firmware zip file from SD card.
Now upload the file and apply installation.
When installation get over do same for google apps.
Wait till process complete of google apps.
Now return back to recovery menu and reboot Captivate SGH-I897 now.
Updation process is completed.
I am stuck on the bolded in red part. When I search for the firmware I cannot find it anywhere, I checked every folder I see. I even went back and pasted the link into a folder that was showing up when in recovery but then once in recovery, that folder is empty! I dont know why the files are hidden and I cannot install them.
Please help, anyone...
Click to expand...
Click to collapse
the same thing hpnd wth me also.. a simple thng i did n was able to install it...
frst rename the file to b flashd to 1...
den copy the file dat is 1.zip to both of ur both and sd card (ya in both) den go to cwm n select install zip.. den slct 1.zip...
yu will b able to c the file now
siva aggzz said:
the same thing hpnd wth me also.. a simple thng i did n was able to install it...
frst rename the file to b flashd to 1...
den copy the file dat is 1.zip to both of ur both and sd card (ya in both) den go to cwm n select install zip.. den slct 1.zip...
yu will b able to c the file now
Click to expand...
Click to collapse
I found out what the issue was. I removed my SD card and instead copied the files into the internal memory and was able to locate them that way. Now when once I start installing the firmware I get this error:
Install /sdcard/external_sd ...
then in red letters: E: Short write of /tmp/sideload/package.zip (No space left on device)
Installation aborted.
Perhaps the firmware is faulty? I had downloaded the most up to date one from here: CyanogenMod Downloads
and now I see there has been a new one added just some hours ago. Should I download it?
Thanks,
studentofknowledge said:
I found out what the issue was. I removed my SD card and instead copied the files into the internal memory and was able to locate them that way. Now when once I start installing the firmware I get this error:
Install /sdcard/external_sd ...
then in red letters: E: Short write of /tmp/sideload/package.zip (No space left on device)
Installation aborted.
Perhaps the firmware is faulty? I had downloaded the most up to date one from here: CyanogenMod Downloads
and now I see there has been a new one added just some hours ago. Should I download it?
Thanks,
Click to expand...
Click to collapse
hey... dat error can b a problem due to ur low space remainng in ur internal memory... n ya yu can download and try dat too:good:

IBall Slide 6318i Firmware

Hey all, Protox 109 os back with another dev piece for the tablet iball slide 6318i
I have by some undisclosed means got the stock firmware of the device which can be used for modding and other stuff.
Here is the Download link :
http://d-h.st/va3
Enjoy and if it is used then dont forget crediting me
How flash the img file :
Method 1 :-
Copy the img file to the external sd and restart the tab
you will get a message confirming flash option
click ok, or yes and it will happen automaticaly
Method 2 :-
Copy file to ext sd card
Reboot tab to recovery mode
Click update Rockchip image option
voila it will be done
Method 3 :-
Get your rockchip drivers installed
Download rockchip batch image flashing tool
follow onscreen instructions and flash image
Now after all this you need to click a thanxx
protox 109 said:
Hey all, Protox 109 os back with another dev piece for the tablet iball slide 6318i
I have by some undisclosed means got the stock firmware of the device which can be used for modding and other stuff.
Here is the Download link :
http://d-h.st/va3
Enjoy and if it is used then dont forget crediting me
How flash the img file :
Method 1 :-
Copy the img file to the external sd and restart the tab
you will get a message confirming flash option
click ok, or yes and it will happen automaticaly
Method 2 :-
Copy file to ext sd card
Reboot tab to recovery mode
Click update Rockchip image option
voila it will be done
Method 3 :-
Get your rockchip drivers installed
Download rockchip batch image flashing tool
follow onscreen instructions and flash image
Now after all this you need to click a thanxx
Click to expand...
Click to collapse
Hi,
Anybody successfully tried flashing this firmware ?
Can somebody help me to boot my slide 6318i into recovery ?
I want to reset my tab to factory state.
thanks,
Just put the update.img to sd-ext and reboot tab normally and there will be an option to update the tab. Click OK and it will be done. But I am not really sure about this option but it should work
protox 109 said:
hey all, protox 109 os back with another dev piece for the tablet iball slide 6318i
i have by some undisclosed means got the stock firmware of the device which can be used for modding and other stuff.
Here is the download link :
http://d-h.st/va3
enjoy and if it is used then dont forget crediting me :d
how flash the img file :
Method 1 :-
copy the img file to the external sd and restart the tab
you will get a message confirming flash option
click ok, or yes and it will happen automaticaly
method 2 :-
copy file to ext sd card
reboot tab to recovery mode
click update rockchip image option
voila it will be done
method 3 :-
get your rockchip drivers installed
download rockchip batch image flashing tool
follow onscreen instructions and flash image
now after all this you need to click a thanxx
:d
Click to expand...
Click to collapse
please give me a flashtool link because my tablet is not turn on and if some time its turn on but stuck at start up logo so i want to full flash with firmware so please give a flashtool link

STOCK_UI_REBORN_V3 PATCH-1(MICROMAX UNITE-2/Kitkat)

STOCK_UI_REBORN_V3 PATCH-1(MICROMAX UNITE-2/Kitkat)
Lollipop Keyboard & Dialogue box/Pop up background.
FLASHING PROCEDURE:-
JUST PUT THIS DOWNLOADED ZIP IN SD CARD .
RESTART IN RECOVERY ,CHOOSE/INSTALL ZIP FROM SD CARD .AFTER INSTALLATION COMPLETES. RESTART THE DEVICE .
AND DONE.
PATCH LINK-https://docs.google.com/uc?id=0B5bbPmY0Z0AHSkMwSUV4aHdTaGM&export=download
BY
AJAY C JAMBURE .
THEMER / DEVELOPER FOR MMX UNITE-2.
IF U LIKE MY POST AND FIND IT USEFUL THEN HIT LIKE AND SHARE THIS POST
THANK U ALL

Categories

Resources