I updated my a2 yesternight when I woke n unlocked da screen it shows a small line across display is dat da LCD fault or should I need to do something else to remove da black line.
Thx in advance. I also tried taking a screenshot of it but da line did not appear
As I have rooted my phone warranty is void can't take it to nearest moto center.
kc92iyngr said:
I updated my a2 yesternight when I woke n unlocked da screen it shows a small line across display Liz's dat da LCD fault or should I need to do something else to remove da black line.
Thx in advance.
As I have rooted my phone warranty is void can't take it to nearest moto center.
Click to expand...
Click to collapse
That sounds like a hardware problem to me. What you should do:
Read this thread at least a couple times.
Read the instructions on that thread about "how to flash a fxz".
Read them again.
Follow the instructions on that thread about "how to flash an fxz" as specifically as possible.
This will unroot your phone, delete all your apps/settings, and return you fully back to stock.
If all goes well then you will end up with a stock phone with a defective screen that you can turn in to Moto for repairs/replacements.
Good luck!
I'll try it now
kc92iyngr said:
I'll try it now
Click to expand...
Click to collapse
If you are not in warrenty anymore replacing the LCD is not very hard, contact me if you need anyhelp.
Related
Hello! Sorry for my English. I have a problem. not included phone Qtek8310, just white screen and all. Hard Reset not working. In Bootloader does not include: (. Help me please.
Thank you in advance
Ok so what were you trying to do?
And what does white screen mean? Do you see the bootloader screen with the three band color? Or can you see the splash screen when you first power up the phone?
Sounds like a ROM update gone bad.
Bootloader, I see none. When you sign a white screen. Computer saw no phone.
Quarx said:
Bootloader, I see none. When you sign a white screen. Computer saw no phone.
Click to expand...
Click to collapse
How did this happen? What were you trying to do? That may be helpful in solving this problem!
This was probably due to the fact that I wrote in the program TeraTermPro format ALL. After that phone ceased to be included
Quarx said:
This was probably due to the fact that I wrote in the program TeraTermPro format ALL. After that phone ceased to be included
Click to expand...
Click to collapse
Sorry my friend - this phone is now completely dead. I've heard of people trying to open their phones and trying to manually revive the OS by hooking up to the chip via JTAG, but I don't think anyone has been successful. See this thread, and you will know what I mean that the phone is dead. Sorry.
Thank you. very sorry .....
Topic can be closed.
Quarx said:
This was probably due to the fact that I wrote in the program TeraTermPro format ALL. After that phone ceased to be included
Click to expand...
Click to collapse
YES! TeraTermPro will kill the phone with the format ALL command. It happened to me recently but was lucky my phone was still under warranty. Send it to service center for replacement of the mother board. Luckily they did know what happened.
I am sorry about your case and good luck to you.
first of all i want to say one of my firend's GSR has dead（brick）
you can't do anything with it but connect computer
there will be a apx driver display
i found LG 2x can use nvflash to save the phone
if anyone can make a nvflash rom for GSR ？
then we can use the same way according LG 2x to save GSR
Somebody please help me！！！！
Pics ?
Herpderp Adreno + Tegra.
talent19890222 said:
first of all i want to say one of my firend's GSR has dead（brick）
you can't do anything with it but connect computer
there will be a apx driver display
i found LG 2x can use nvflash to save the phone
if anyone can make a nvflash rom for GSR ？
then we can use the same way according LG 2x to save GSR
Somebody please help me！！！！
Click to expand...
Click to collapse
Too bad that my friend's galaxy R also become black screen forever today! (Is it a black day today?)
He told me that he has plugged the machine to USB charge and leave it there for an hour. After unplugged, he cannot wake up the device. After pulling off battery and re-plug the battery, he still could not see anything from screen except complete darkness...
I do think that the phone has gone into APX mode and *might* be rescued by using nvflash method... still, I don't know how to help him. Anyone get any ideas?
I knowed more than 10 people whose GSR become brick . And i doubt the quality of Samsung GSR . because according to those people they said their phone become brick unexpected. and only way to recovery is use one machine called T32 or riff Tjag...
I've flashed about five different stock roms, and three seperate fan made roms plus numerous part builds to test for devs, and I have had zero problems
sorry to hear about yours
talent19890222 said:
I knowed more than 10 people whose GSR become brick . And i doubt the quality of Samsung GSR . because according to those people they said their phone become brick unexpected. and only way to recovery is use one machine called T32 or riff Tjag...
Click to expand...
Click to collapse
Thanks for your information.
So, should I suggest my friend to return the phone to Samsung repair center? Can Samsung recover it? If the phone has been rooted, is it still under warranty? Thanks.
ardatdat said:
Thanks for your information.
So, should I suggest my friend to return the phone to Samsung repair center? Can Samsung recover it? If the phone has been rooted, is it still under warranty? Thanks.
Click to expand...
Click to collapse
chinese?如果是我直接打中文了 我在论坛里貌似看过你...
ardatdat said:
Thanks for your information.
So, should I suggest my friend to return the phone to Samsung repair center? Can Samsung recover it? If the phone has been rooted, is it still under warranty? Thanks.
Click to expand...
Click to collapse
If they detect the root, then they would not give you the warranty. But if it completely dead and they are unable to see if it has been rooted or not, they can't void the warranty.
talent19890222 said:
chinese?如果是我直接打中文了 我在论坛里貌似看过你...
Click to expand...
Click to collapse
Yes, you should see my name in some Chinese forums as I have also posted my kernel for Galaxy R in some Chinese forums
Well, I think we should obey the rules in this forum that we should communicate in English in all open threads.
If you want to talk in Chinese with me, can you please type to me using "Private Messages"? Thanks.
So , is there any news ?
RIFF doesn't detect my phone .
Hi XDA
i have bought i9020 i am having an issue with camera flash sometimes its working and sometimes its not
like if i take 10 pic flash works in 1 pic only i have tried factory reset changing flash mode to auto and on still i face the same issue
i am on 4.0.4 baseband I9020XXKI1.. please help or i have to send it for repair since its a non warranty one (imported)
ok got it replaced since it was less then an hour the shopkeeper agree to replace now i want to root and can any1 tell me how can i find out is my bootloader unloced or not i can see a small padlock unlocked at startup screen with google
there are several threads here as well check out nexusshacks they have a pretty goo write up on how to root, flash recovery, and super user
imranaryan said:
ok got it replaced since it was less then an hour the shopkeeper agree to replace now i want to root and can any1 tell me how can i find out is my bootloader unloced or not i can see a small padlock unlocked at startup screen with google
Click to expand...
Click to collapse
Am on mobile can u show me a link.. it would be great
http://www.fotosik.pl/pokaz_obrazek/pelny/7ebe08a2b2e135ea.html
http://forum.android.com.pl/attachment.php?attachmentid=95985&d=1413954853
http://forum.android.com.pl/attachment.php?attachmentid=95987&d=1413958300
http://www.fotosik.pl/pokaz_obrazek/pelny/d08020e375678c25.html
please help. Do RMA repair motherboard? is a way to repair this phone? can lock the bootloader and clean templar flag through fastboot??
Link 2 and 3 don't work.
Please write full description of problem here. Do not link to external sources as we probably wont read them
I see from link 1 you're using Wugfresh to flash stock. Most of us discourage use of toolkits, particularly when flashign stock is so easy.
Please click the link in my signature and read 2 threads. The adb and fastboot thread and the return to stock thread.
If you get the same error doing things properly, your NAND is fried and needs to be sent for repair. That is usually what "write failure" means. However since you are using toolkit, I cannot say that the error is genuine or not... So please use fastboot to flash stock
http://www.fotosik.pl/pokaz_obrazek/pelny/6ffdde1cca5a3865.html
up
tuningsea said:
http://www.fotosik.pl/pokaz_obrazek/pelny/6ffdde1cca5a3865.html
up
Click to expand...
Click to collapse
Unfortunately, it looks like the emmc is toast. You'll need to send it in for repairs. Contact Google if you've bought from the playstore. Bought from a retailer? Contact LG.
Good Luck!
I bought the LG. If I have unlocked bootloader + root means that for the repairs I have to pay?
Did you flash something recently? Because EMMC failure can be if you flash something not for your device (e.g kernel,rom and etc) or did got wet or fallen down? Or it's just happened out of sudden?
It happened suddenly, even I do not know how. I used a flashlight for 30 minutes the phone is restarted and died. I can enter fastboot mode only
tuningsea said:
I bought the LG. If I have unlocked bootloader + root means that for the repairs I have to pay?
Click to expand...
Click to collapse
If your warranty falls under LG, you might need to pay up since the bootloader is unlocked. Try to lock the bootloader and reset the tamper flag if you can.
Follow the last part of this tutorial:
http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
"fastboot boot path / to / TWRP.img" and stands on the logo teamwin. nothing can be done
http://www.fotosik.pl/pokaz_obrazek/pelny/ac67c81c2b162108.html
Motherboard die? whether it is for sure the motherboard?
tuningsea said:
http://www.fotosik.pl/pokaz_obrazek/pelny/ac67c81c2b162108.html
Motherboard die? whether it is for sure the motherboard?
Click to expand...
Click to collapse
You cannot write the bootloader, which means teh device (NAND Chip) that you are writing to is likely failed. This is in turn attached to the motherboard, so yes - probably needs a new Motherboard. Probably.
GOD
tuningsea said:
It happened suddenly, even I do not know how. I used a flashlight for 30 minutes the phone is restarted and died. I can enter fastboot mode only
Click to expand...
Click to collapse
How hot was the phone when it happened? I'm wondering if it has anything to do with the phones overheating (for some reason, like too high thermal throttling - remember the Xbox RROD)?
http://forum.xda-developers.com/google-nexus-5/help/stuck-google-boot-screen-fix-flashing-t2910842
Look at my thread
AndreIrawan97 said:
http://forum.xda-developers.com/google-nexus-5/help/stuck-google-boot-screen-fix-flashing-t2910842
Look at my thread
Click to expand...
Click to collapse
I do not think you have read THIS thread.
So I have an AT&T G4 and I was attempting to root it, something went wrong, when I completed the rooting process I unplugged my phone and got an Authentication fail #11. So I decided I would flash the H810PR ZDK on to the phone hoping I could fix it using this guide (http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848) after I completed that I got nothing..... black screen. Now it wont turn on and when I plug it in hear a failed driver sound and this shows up http://imgur.com/EGgdiYL . I've read like two success stoires of people with my problem actually getting AT&T to replace their phone with my problem under warranty, what can I do?
LunaticHD said:
So I have an AT&T G4 and I was attempting to root it, something went wrong, when I completed the rooting process I unplugged my phone and got an Authentication fail #11. So I decided I would flash the H810PR ZDK on to the phone hoping I could fix it using this guide (http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848) after I completed that I got nothing..... black screen. Now it wont turn on and when I plug it in hear a failed driver sound and this shows up http://imgur.com/EGgdiYL . I've read like two success stoires of people with my problem actually getting AT&T to replace their phone with my problem under warranty, what can I do?
Click to expand...
Click to collapse
Its look like your device's hard brick, nothing can do except changing the device.
faizalotai said:
Its look like your device's hard brick, nothing can do except changing the device.
Click to expand...
Click to collapse
I'm under warranty still, do you think that I can exchange it with AT&T?
LunaticHD said:
I'm under warranty still, do you think that I can exchange it with AT&T?
Click to expand...
Click to collapse
I guess the phone are not booting, as long as there's no showing of leaking or damage..I think its possible to get new one..
Just says the phone not boot after charging or so..
faizalotai said:
I guess the phone are not booting, as long as there's no showing of leaking or damage..I think its possible to get new one..
Just says the phone not boot after charging or so..
Click to expand...
Click to collapse
Correct, it isnt booting at all, so I should just tell them it broke or somthing along those lines?
LunaticHD said:
Correct, it isnt booting at all, so I should just tell them it broke or somthing along those lines?
Click to expand...
Click to collapse
Yup, and pray..
faizalotai said:
Yup, and pray..
Click to expand...
Click to collapse
Okay thank you for the help! I'll probably contact them tomorrow and just tell them it stopped working and hopefully they will just replace it, after all its their fault for not giving us a proper ZDK to fix it ourselves
LunaticHD said:
Okay thank you for the help! I'll probably contact them tomorrow and just tell them it stopped working and hopefully they will just replace it, after all its their fault for not giving us a proper ZDK to fix it ourselves
Click to expand...
Click to collapse
What if I don't have a warranty on my phone?
Who's your carrier?
LunaticHD said:
Who's your carrier?
Click to expand...
Click to collapse
AT&T
I did the same I flash the wrong kdz files.All we need some one to uploads the complete eMMC IMAGE to try to revive the phone
The biggest error, is to not make a backup of your stock system.img before flashing.
I encountered the error #11, and fixed it by flashing back to stock, then flashing the correct rooted system image version.
It's caused by flashing a system image that doesn't match your current installed software version.
Ie- you have 10g installed but attempt to load a rooted 10o system image, or vice versa.
same happen to me but i have no opcion im outside the united states so im stuck with this bricked phone. theres a tool for the lg g3 called boarddiag that only works for g3 maybe in a future g4 is added