Database Info

Rooting and Flashing a custom ROM

I flashed the leaked froyo firmware I897UCJI6 on my samsung captivate using odin 1-click method. I have a working 2.2 now. My phone is not rooted. I am planning to flash a custom ROM and try other custom ROMs out there in the market. I've gone through a three part video series by mobiletechvideos on how to root and flash a custom ROM (http://forum.xda-developers.com/showthread.php?t=884364). But, i still have a few questions.
1. For rooting, do i need to flash the phone back to the stock JF6?
2. In the xda link given above, i am fine until step #4. Step #5 is a little bit confusing to me. After i copy the root file to the root directory in the internal sd card on my phone, i rename it to update.zip. Also, i copy the clockworkrecovery to the root directory in the internal sd card in the phone and rename it to update.zip. Now, after i am doing with rooting and clockworkrecovery, i have to proceed further to flash the custom ROM. Now, the steps mentioned in the xda forum does not say anything about moving the custom ROM file to the root directory in the internal sd card on the phone. My question is: Do i need to copy the custom ROM zip file into the root directory of the phone? Do i need to rename the custome ROM file to update.zip as well?
Someone please help.

Yes rom goes on sd, no do not rename
If you are on ji6 you will not be able to install clockwork because of 3e recovery. Two option, flash back to stock using
http://www.fileserve.com/file/emnCn2j
One click odin, provided you are at&t and build number is 1009 and lower located under battery
2 look for modded 3e recovery in. development for captivate posted by exist

mcord11758 said:
Yes rom goes on sd, no do not rename
If you are on ji6 you will not be able to install clockwork because of 3e recovery. Two option, flash back to stock using
http://www.fileserve.com/file/emnCn2j
One click odin, provided you are at&t and build number is 1009 and lower located under battery
2 look for modded 3e recovery in. development for captivate posted by exist
Click to expand...
Click to collapse
Thanks for the reply. What is 3e recovery by the way? I am able to flash back to stock (jf6) using odin 1-click by following the volume up + down method to download. My build number is not in that 1000 series. Are you referring to s/n number found under the battery? In many threads I have seen ppl saying if u r under 1009 build # then you need to use 3 key combo method. You are saying the opposite. I am confused now. Sorry sir but I think I need.more explanation. I thank you for your time
Sent from my SAMSUNG-SGH-I897 using XDA App

Are you on at&t
If you can get into dl mode issuing volume and usb then you have three button combo. Later builds can not use jf6 stock 1010 and up. Your build had to be there, and I do not think it its possible it is not in the 1000s if you have a captivate

mcord11758 said:
Are you on at&t
If you can get into dl mode issuing volume and usb then you have three button combo. Later builds can not use jf6 stock 1010 and up. Your build had to be there, and I do not think it its possible it is not in the 1000s if you have a captivate
Click to expand...
Click to collapse
Pls clarify if s/n # found under battery is actually the build number. Also, according to many posts in this forum, three buttom combo is
1. Vol up
+
2. Vol down
+
3. Press Power button
Since when USB slot became a button? I am sorry but I dont understand.
Sent from my SAMSUNG-SGH-I897 using XDA App

Sorry for confusion
Recovery uses three burton combo
Volume up and down and power
Download mode uses volume up and down plug in usb
On your phone under battery left side under sn above sku there us your build. Mine is 1008

mcord11758 said:
Sorry for confusion
Recovery uses three burton combo
Volume up and down and power
Download mode uses volume up and down plug in usb
On your phone under battery left side under sn above sku there us your build. Mine is 1008
Click to expand...
Click to collapse
Thank you. Mine is 1007. So, now back to the question. I need to flash back to stock JF6 using odin 1-click. Then,i need to root the phone and install.clockworkmod recovery using the info found in the 3 part video series by mobiletechvideos. And,proceed with the custom ROM flash. Is my understanding correct? Thanks for replying patiently to all my queries. Thanks
Sent from my SAMSUNG-SGH-I897 using XDA App

No need to root when in stock.
Dl this
http://forum.xda-developers.com/attachment.php?attachmentid=464425&d=1292362952
This update zip gives you clockwork recovery.
When on stock put this on the root of your sd.
Phone off
Three button combo
When at&t comes up let go all three
Blue recovery
Select reinstall packages
Boots to same recovery
Reinstall packages
Green clockwork recovery
Rom should be saved to sd as well.
Select install zip from sd
Choose zip
Rom file
Confirm
done, let it do it's thing
enjoy

mcord11758 said:
No need to root when in stock.
Dl this
http://forum.xda-developers.com/attachment.php?attachmentid=464425&d=1292362952
This update zip gives you clockwork recovery.
When on stock put this on the root of your sd.
Phone off
Three button combo
When at&t comes up let go all three
Blue recovery
Select reinstall packages
Boots to same recovery
Reinstall packages
Green clockwork recovery
Rom should be saved to sd as well.
Select install zip from sd
Choose zip
Rom file
Confirm
done, let it do it's thing
enjoy
Click to expand...
Click to collapse
WOW! I clicked on the xda link from my phone and the update.zip got downloaded into the download folder in my internal sd (i deleted it). I see the point now. I need to root only to back up all apps and system data such as contacts, sms,media etc. Otherwise, no need to root. Please conform the steps one last time if you don't mind:
1. Copy the update.zip into the root directory of my phone (how to get to the root directory, by the way! Sorry it is a dumb question). Also, copy the custom ROM zip file to the same root directory.
2. Using 3 button combo, follow the remaining steps.
Now, after I successfully flash the custom ROM, can I use the android market and install all the apps I use.
Sent from my SAMSUNG-SGH-I897 using XDA App

antonyvijai said:
WOW! I clicked on the xda link from my phone and the update.zip got downloaded into the download folder in my internal sd (i deleted it). I see the point now. I need to root only to back up all apps and system data such as contacts, sms,media etc. Otherwise, no need to root. Please conform the steps one last time if you don't mind:
1. Copy the update.zip into the root directory of my phone (how to get to the root directory, by the way! Sorry it is a dumb question). Also, copy the custom ROM zip file to the same root directory.
2. Using 3 button combo, follow the remaining steps.
Now, after I successfully flash the custom ROM, can I use the android market and install all the apps I use.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
When you open my files app you are looking at the root of your sd. You will see your download folder, go to it long press either file select move phone will direct you to root if sd, select paste.
You are correct you need root to run programs like titanium backup to backup your apps, but when you flash stock they will all be gone either way. So unless you are rooted now you can not back up your apps. You can dl them again do not restore any system data just user apps. Backup contacts by exporting to ext sd, or sim
I am checking out so I won't be responding again for the night. Good luck

The simplest way there is to root/ flash a rom is to use a one click root program.
http://forum.xda-developers.com/showthread.php?t=739304
If you use this, it roots your phone for you. After you root with the program in the link above( there are videos on how to use the program if you get confused ) Download Rom Manager from the market. open up rom manager and select flash clockwork mod recovery. After that in the program rom manager click reboot into recovery( easier than holding volume buttons) the stock recovery will pop up when the phone reboots. Click reinstall packages. It will bring you back to the stock recovery, click reinstall packages for a second time and you will have cwm (clock work mod ) recovery. In clockwork mod recovery there is an option to back up your phone. do this before you flash a rom. after you back up turn your phone on. Make sure it is in usb debugging. connect to your computer and on your phone select mount sd. drag the downloaded rom .zip file into the sd. the root of you phone is just what ever drive your phone shows up as. unplug your phone reboot into recovery and in cwm recovery there is an option to factory wipe, do this and after it is done, click the option install zip. then choose zip from sd. highlight the rom . zip file you are flashing and select it. it will take a minute or too and when it is done just reboot the phone. First boot will take a while but once it boots your all set. any questions you can pm me and good luck.

^ That's a way. .... OR you could use my program to do it all (Flash to stock, root, install custom ROM, etc.). Link is in my signature.

bay_wolf said:
^ That's a way. .... OR you could use my program to do it all (Flash to stock, root, install custom ROM, etc.). Link is in my signature.
Click to expand...
Click to collapse
also very true^^ his toolbox program has everything you would need in one spot

MaximumPotential said:
The simplest way there is to root/ flash a rom is to use a one click root program.
http://forum.xda-developers.com/showthread.php?t=739304
If you use this, it roots your phone for you. After you root with the program in the link above( there are videos on how to use the program if you get confused ) Download Rom Manager from the market. open up rom manager and select flash clockwork mod recovery. After that in the program rom manager click reboot into recovery( easier than holding volume buttons) the stock recovery will pop up when the phone reboots. Click reinstall packages. It will bring you back to the stock recovery, click reinstall packages for a second time and you will have cwm (clock work mod ) recovery. In clockwork mod recovery there is an option to back up your phone. do this before you flash a rom. after you back up turn your phone on. Make sure it is in usb debugging. connect to your computer and on your phone select mount sd. drag the downloaded rom .zip file into the sd. the root of you phone is just what ever drive your phone shows up as. unplug your phone reboot into recovery and in cwm recovery there is an option to factory wipe, do this and after it is done, click the option install zip. then choose zip from sd. highlight the rom . zip file you are flashing and select it. it will take a minute or too and when it is done just reboot the phone. First boot will take a while but once it boots your all set. any questions you can pm me and good luck.
Click to expand...
Click to collapse
Thanks a lot. This helps a lot. I also saw thw video on toolbox from bay_wolf on mobiletechvideo series. That looks pretty simple for an, amateur like me. The explanation you gave me is also superb. Thank you very much
Sent from my SAMSUNG-SGH-I897 using XDA App

bay_wolf said:
^ That's a way. .... OR you could use my program to do it all (Flash to stock, root, install custom ROM, etc.). Link is in my signature.
Click to expand...
Click to collapse
Thank you. I have your toolbox program installed in my computer running 64 bit windows 7 home.premium edition. I have a few questions. My phone is running the leaked JI6 2.2 rightnow. What should I choose first from the toolbox? If I choose, flash to stock then do I need to select thw JF6 firmware file from somewhere or the tool itself will do the job? Sameway, if I click root, then do I need to select a root / clockwork files to finish rooting or again the tool itself will do the job? I understand for flashing the custom ROM I need to choose the the ROM .zip file. I watched the video about your program on mobiletechvideos on youtube. I think I need to watch it again or if you don't mind then can you give me the steps to use your toolbox (given what firmware I have currently running). Thank you
Sent from my SAMSUNG-SGH-I897 using XDA App

Why ji6? What are the benefits other than the audience chip will work?

[GT-P6210][CWMRecovery][ROOT] ClockworkMod Recovery and Root (07-Jan-2012)

**** USE AT YOUR OWN RISK ****
The following is posted so that I may share what I've done. It was done by me and for me. If you use it for you, then you take responsibility for whatever happens. This could, potentially, cause problems. It certainly will void your warranty (though it's pretty easy to undo this with no obvious signs.)
Install ClockworkMod Recovery and roots your P6210 tablet.
DO NOT ATTEMPT TO RESTORE ANY CWM BACKUP MADE WITH ANY OTHER VERSION/REVISION. IT WILL BREAK THINGS. THIS VERSION IS NOT BACKWARDS COMPATIBLE. JUST START WITH FRESH BACKUPS AND BE HAPPY.
WHAT THIS DOES:
Installed from recovery, this .zip will first ensure that it's running on the Samsung GT-P6210. If you have a different model, don't waste your time downloading it. It won't work. I have a P6210 to test with. I don't have any other 7 plus tab, so I can't test any other 7 plus tab, and therefore won't even act like it might work. If you want to try it anyway, you should have the knowledge to repair whatever you break - in which case you'll also have the knowledge to unpack this zip file and do things the manual way.
(starting with 20111210, a backup of the recovery is no longer made. I feel this is no longer needed as there is a confirmed working ODIN package people can use to restore their tablets with.)
Next, a new version of the clockwork mod recovery is installed.
(starting with 20111210, old backups are no longer purged. If you are upgrading from my original CWM recovery (previous to Dec 9th), please manually delete old clockwork recovery backups, as they are NOT VALID and will destroy your normal boot operation if you attempt to restore with a proper/current version of this recovery.)
Finally, the tab will be rooted. This only involves copying a tiny file (called 'su') to the system. In order for most android apps to make use of that, however, another application must be first installed. (See "Finishing SuperUser installation" below.) I considered putting that "SuperUser" application as part of this package, but it's really very easy to get it from the market.
INSTRUCTIONS:
Put the installation zip file on your tablet's external SD card. If you don't have an external SD card, you won't be able to install this. MicroSD cards are cheap. If you have a tablet that costs 399 USD, you can afford to spend a few extra dollars/euros/pesos/whatever on a microSD card. Just get one. Not only is it required for installing this from the factory recovery, but it makes a great place to back things up to. A nice 16GB card is suggested. 32GB is better. You'll need AT LEAST 1GB for this recovery. If you have a previous version of CWM already in-place, you won't need the storage card.
You can download the .zip file directly to your tablet and then possibly use the built in "My files" applet to move it to extStorages/SdCard, or you could download it to your computer and use "adb" to push the file to /mnt/sdcard/extStorages/SdCard, or you should be able to get it there with "Kies." If you have the proper adapter, you could also attach the microSD card directly to your computer and just copy it there. It doesn't matter HOW you get it on the card, as long as it's on the card.
After the zip file is on your microSD card, and the microSD card is inside (and recognized by) your tablet, then you need to...
Boot into recovery mode.
If the recovery version banner is "CWM-based Recovery v5.x.x.x", then you already have a version of CWM installed and should skip ahead to the proper section. If the banner is "Android system recovery (3e)", then you have the factory recovery and should continue with...
Installing from factory (3e) recovery:
Use the volume up/down buttons to move the highlight up and down, and the power button to select the highlighted option.
1. Select "apply update from external storage"
2. Select the file you placed on your storage card (starts with "p6210_CWMR".)
3. Sit back and watch it run. Read the information that is being sent to the screen. If there's an error, it'll display some message. If it works, it'll display a message starting with the word "Done!"
4. Select "reboot system now."
You now have a CWM-based recovery installed, and your tablet is rooted.
Please skip ahead to "Finishing SuperUser installation"
---------------------------------------------
Installing from CWM-based Recovery
Use the volume up/down buttons to move the highlight up and down, and the power button to select the highlighted option.
1. Select "Install zip from sdcard"
2. Select "choose zip from internal sdcard" (which will actually point to the external card.) (If you are upgrading and chose not to put the .zip on the external microSD card, you might need to select "choose zip from sdcard" instead.)
3. Select the file you placed on your storage card (starts with "p6210_CWMR".)
4. Select "Yes - Install (whatever filename you selected)"
5. Sit back and watch it run. Read the information that is being sent to the screen. If there's an error, it'll display some message. If it works, it'll display a message starting with the word "Done!"
6. Select "+++++ Go Back +++++"
7. Select "reboot system now."
---------------------------------------------
Finishing SuperUser installation
Install the SuperUser application directly from the android market:
https://market.android.com/details?id=com.noshufou.android.su
....
Post-installation Notes and Issues
It's a known issue with the version of CWM used in this recovery that the "internal sdcard" actually references the built in storage on the tablet. So, if you want to back up to your microSD card, choose "backup to internal sdcard". I'm retaining this issue to stay "compatible" with other CWM recoveries of the same version number. (won't fix)
The .zip package displays an incorrect version identifier/date when version 20111209 is being installed. (It's shows a banner with the date of 06-Dec) (cosmetic)
This recovery is NOT compatible with firmware updates via Kies (and perhaps not via other samsung official methods.) In order to perform a firmware update, I suggest the following procedure: First, perform a CWM Recovery backup, then use the ODIN package found elsewhere to restore this tablet to a factory state. Let Kies upgrade the tablet to whatever version it wants (give it a few tries in case multiple upgrades are needed.) Then re-install this recovery, and perform an "advanced restore" (or "advanced restore from internal sdcard if you made the backup using the similar option.) From there, restore "data." That will leave the entire firmware update in place. (boot is the normal boot kernel; system is what people like to call a ROM here, but is the samsung pre-installed apps; and data contains the applications you install and all your data.) Then "go back", wipe the cache partition, advanced, and wipe the dalvik partition. HOWEVER, please note that I have no way to know if any given samsung firmware update is "compatible" with this restore unless I've tried it myself. It's compatible with everything released up to the date of this note (10-Dec-2011), but I can't predict the future.
Donation?
I don't take donations. If you have spare money (I don't), please donate it to the Salvation Army, Red Cross, or just find a homeless person on the street and give them something. My favorite charity is the Shriner's Hospital for Children. (yes, I am.) If you'd like to thank me, there's a button at the bottom of this post dedicated to that. If you don't want to thank me, that's okay too.
Changes for 20120107:
Brought the recovery kernel up to date with the normal boot kernel. The only impact should be that if you keep crashing any time you boot normally (and before you are able to perform any action), you can now boot into recovery to _hopefully_ be able to retrieve the /proc/last_kmsg as a diagnostic tool.
Reduced the size of the .zip quite a bit.
Changes for 20111210:
* A backup of the existing recovery image is no longer being made. I feel this is no longer needed, as an ODIN package is now confirmed to be working that people can use to restore their tablets to a factory state.
* Old clockworkmod recovery backups are no longer being deleted when installing this. If you are installing this or newer from my CWM recovery previous to Dec 9th, 2011, please manually delete all those old backups. If you attempt to restore them, please be prepared to download ODIN and a factory ODIN image, as you'll need it in order to get your tablet working again. You've been warned...
* The issue that was causing backups to the tablet's built-in storage to fail has been corrected.
Changes for 20111209:
* Issues with getting into recovery are resolved.
* a backup of the recovery is only made if there is no sign of a previous version of this same recovery in place
Credits
Most obviously, Koush for his wonderful clockworkmod recovery. It's the basis of this entire project. Entropy512 for pointing me in the proper direction on a couple of things, pershoot mods to CWM for the Galaxy Tab 10.1 that I ported over to this one (due to the different partition structure of honeycomb devices.)
Links are below...
Take care
Gary

thanks gary, how might we be able to tell if this will be kosher with 3g version? do we need to --dump all pit via heimdall to ensure all partitions match up,etc? Thank you for your speedy work.

chrisrotolo said:
thanks gary, how might we be able to tell if this will be kosher with 3g version? do we need to --dump all pit via heimdall to ensure all partitions match up,etc? Thank you for your speedy work.
Click to expand...
Click to collapse
It's not kosher at all. I didn't wash my hands before compiling it, and had bacon bits on my salad for lunch. Sorry.

Thanks Gary. I have been watching your progress for about a week and you are like a put-bull. Amazing. u da man!!!

Pit bulls would be shamed as wussies. Many great devs possibly have a touch of Asperger's syndrome (with MUCH better socialization skills!) which, with tasks like this, is a benefit! At the very least just plain tenacious! lol
Thanks Gary. I've learned a lot just following along reading the discourse between you and others like Entropy. Appreciate it.

garyd9 said:
It's not kosher at all. I didn't wash my hands before compiling it, and had bacon bits on my salad for lunch. Sorry.
Click to expand...
Click to collapse
ahhh , close enough. anyways what could we do to find out without actually flashing this to possible incorrect partition??

chrisrotolo said:
ahhh , close enough. anyways what could we do to find out without actually flashing this to possible incorrect partition??
Click to expand...
Click to collapse
Which "3g" model do you have? The tmobile one or the international one?
I'm trying to narrow down which is the GT-P6200 and which is the SGH-T869!
I'm working with someone via PM and email to get the information needed for the SGH-T869, and I think it'll be pretty easy to get a recovery together for it, but other people will have to test and validate. I think this is the tmobile version...

international p6200

Soft Brick(kinda Sorta - well not really). Using defult 3e recovery. Tab would boot up, but would not go into recovery at all. Nada Nada. Thought it might have been some leftovers from other stuff I have been trying, so I odin3'd the factory image, did a wipe all and tried it again. Same difference. The only thing I could really think of was maybe I had a corrupted download.
funny thing is that it would boot up into the OS. Just not into recovery. will keep trying as I really want a way to make nandroid backups.

otamctech said:
Tab would boot up, but would not go into recovery at all.
Click to expand...
Click to collapse
No need to ODIN... that's why the package creates that backup recovery image. However, you said it's booting normally, correct? If so, it's not broken or bricked (and I experience the exact same thing.)
For some odd reason (that I haven't been able to figure out), after I flash a non-stock recovery, its very difficult to get the tab into recovery mode. Some times I get it instantly, and some times I have to try several times in a row. Are you using adb? If so, it might be easier. Power off the tab, plug it into your computer, and eventually the tab goes into a "low power mode" where you see the battery gauge but nothing else. From there (again, assuming you have adb installed/working), you can just run "adb reboot recovery" That usually gets me into recovery. 90% of the time.
If not, just try again. If you see the samsung animation starting, press/hold the power button to turn it off again, then press/hold volume up again... etc. It's a PITA, and a major annoyance of mine.
Two things about it make it REALLY annoying for me. First, I'm using samsung's own kernel for this... but I'm just repacking the initramfs portion of it. Second, if you put the factory recovery back, it's easy to get into recovery again.

chrisrotolo said:
international p6200
Click to expand...
Click to collapse
I'll get to that one eventually. I'm commited to do the tmobile one next, and I REALLY need to concentrate on my full-time job (the one that pays me a salary) which only leaves me a couple hours each day.
take care
Gary

absoultely, take your time. Is there a certain battery percentage requirement to get into either stock or CWM recovery say 50% or 60% minimum? we had this issue on dell streak 7. Let me know if I can help with partition layout or anything for p6200. thanks.

chrisrotolo said:
absoultely, take your time. Is there a certain battery percentage requirement to get into either stock or CWM recovery say 50% or 60% minimum? we had this issue on dell streak 7. Let me know if I can help with partition layout or anything for p6200. thanks.
Click to expand...
Click to collapse
No hard requirement I'm sure - but flashing at below 50% is just a stupid reckless risk, plain and simple as that.

If you are having issues getting into recovery after flashing this...
Here's a procedure I've come up with that has allowed me to get into this recovery 9 out of 10 attempts (and it doesn't require any special connections to a computer.) Please read all the steps before starting so you're prepared for what comes next. It'd really be annoying to have recovery finally pop up, but you weren't paying attention so the tablet turned off.
power off the tablet
Throughout this entire process the volume UP switch should be held and not released. This is the side of the volume switch closest to the power button. Once you see your recovery screen, you can release the volume switch (and any other button you might be holding at that time.)
Press/hold Volume Up (constant)
Press the power button, hold it down for 2-3 seconds, and release it.
You'll see the Samsung logo screen for a few seconds...
Instead of the expected recovery screen, you might see the samsung boot animation with music. If so, immediately (without releasing volume up), press and hold (and keep holding) the power button. Don't let it go this time.
The tablet will appear to power off after holding the power button for a few seconds, and then will power back on a second or two later.
(you're still holding that power button, right? how about volume up? Good.) Again, you'll see the samsung logo screen for a few seconds...
Instead of the boot animation, recovery should pop up this time. Release the power button as soon as it does or you'll just turn the tab back off again. You should also release the volume UP at this point.
(If you've flashed my recovery, please try this. If it doesn't work, please take the effort to reply to this post so I can know what people other than myself are experiencing.)
Take care
Gary

updated OP with:
Post-installation Notes and Issues
I'm aware that after flashing this, it is difficult to get back into recovery. I'm not sure WHY, but it's fairly consistantly a pain in the rear. However, I have found that following the steps in the following post seems to work (at least for me) 9 out of 10 times. (I was distracted on the 10th try, so not sure if it worked or not): http://forum.xda-developers.com/show...6&postcount=14
Remember above I mentioned that when this package installs, it creates a backup of the old recovery? Well, it does that no matter what recovery was in place. So, if you install this package with a factory recovery, that backup will be of the factory recovery (which is probably what you want.) If you install this package a second time when you already have the CWM Recovery installed, you'll overwrite that factory recovery backup with a backup of the CWM recovery (which makes no sense.) I'd strongly suggest that after you FIRST install this package, you make a copy of that backup recovery image file (and full filename is displayed when it's created), and stick that copy someplace safe. Perhaps just rename it and copy it to your SDcard or computer. A good name might be "p6210_factory_recovery.img"

The Tab 10.1 could be difficult to get into recovery too.
Usually, the following works for me:
Press and hold VolUp
Press and hold Power until the screen turns on (this is slightly different from your instructions)
Release Power but keep holding VolUp until Recovery shows

__________________

somebody9 said:
I was wondering if anyone knows what needs to be deleted in order to get rid of that pesky pop up menu you get by pressing on the Chevron/Arrow in the middle of the bar.
Click to expand...
Click to collapse
Please start a new thread for a new topic. Try to keep this one isolated to the CWM recovery.

garyd9 said:
Please start a new thread for a new topic. Try to keep this one isolated to the CWM recovery.
Click to expand...
Click to collapse
Sorry about that. Post removed.

Garys method of booting into recovery works fine. I'm just going to post it in linear format.
1. Press the power button and select Power Off
2. Press the volume up button (closest to power button) and do not release until the recovery screen is displayed
3. Press (do not hold) the power button
4. The static Galaxy 7.0 Tab Plus screen will display (possibly twice)
5. When the animated Samsung screen displays, press and hold the power button
6. The static Galaxy 7.0 Tab Plus screen will display
7. Release all buttons when the recovery screen displays.
This works every time for me

How To Root Stock Droid Charge FP5

Typed this up for a friend I thought it would be nice to share with any new droid charge owners looking for a guide to how to root FP5.
Major Credit goes to:
trparky
I learned how to do this from his website:
Tom's Android Knowledge Base -- Offline
Root Stock Droid Charge FP5:
First download this tool:
MD5-Checker
It will be used to run an md5 check on the files before they are flashed to your phone.
Next download this:
http://www.toms-world.org/android/download/ftp/ODIN3+v.1.82.exe
MD5: 3D8E8240F2A4F66E63A6622F65C7C909
This is Odin the *Windows* program used to interact with your phone.
Next download this:
0817_charge_recovery.tar.md5
MD5: 925D33E1AD40518AAC09B179DFDB0F76
This is CWM your main interface that will be used when loading roms, etc
Finally download this:
http://downloads.noshufou.netdna-cdn.com/superuser/Superuser-3.2-RC3-arm-signed.zip
MD5: 6462AC14CD38ED7C539CE3E29A6B92A8
This is the file that you flash to root your phone.
Run MD5 Tool to make sure all the MD5's match the previous MD5 checksum!
1. Open the MD5 program
2. Select create an MD5 checksum
3. Browse to the file that needs to be checked
4. Verify that the MD5 created matches the ones above (if they don't re-download)
5. Repeat for all files
Now you have all the files downloaded to root your phone. The steps to root stock droid charge are as follows:
Copy files to SD card
1. On the home screen select settings
2. Select USB setting and turn on USB debugging
3. Plug in your phone to your computer (give it a min to install drivers)
4. Pull down your top bar and select "Connect storage to PC" button
5. Create a new folder called Downloads
6. Drag the Superuser-3.2-RC3-arm-signed.zip file into the Downloads folder that you just created
7. Hit the "Disconnect from storage PC" button on your phone
CWM
8. Turn off your phone
9. Once the phone is completely off take out the battery
10. Open Odin then while holding the volume button down plug your phone into the computer
11. When you get the Yellow triangle with android in it your in download mode, plug battery back in.
12. On the left under option uncheck Auto Reboot (you and leave F. Reset Time checked)
13. Once Odin picks up your phone (a yellow com box will show up) click on PDA and browse to the CWM file and select it
14. Click start (it should be a quick flash)
15. Once the flash says successful take out battery and unplug phone
Superuser
16. Put your battery back in the phone
17. Hold down volume up and home (button on bottom of phone that has an up arrow) and the power button
18. Once you see the Samsung logo release the power button but continue to hold down the volume up and home button down
19. Once your phone has booted into CWM(there will be a banana at the bottom of the screen) arrow down with the volume button and select mounts and storage with the power button
20. Arrow down to the option that says mount system and use the power button to select it
21. Arrow down and select go back
22. Arrow down and select install zip from sdcard
23. Select choose zip from sdcard
24. Arrow down and select Downloads
25. Select the file that says Superuser-3.2-RC3-arm-signed.zip
26. Arrow down and select Yes - Install Superuser-3.2-RC3-arm-signed.zip
27. Select Go Back
28. Select Go Back
29. Select reboot system now
Let the phone boot up go the market and install root check it should say you’re rooted. Then your all done your phone has root that wasn't so hard was it
If you still are unsure or run into any problems feel free to send me a pm I would be happy to help you through the process via skype.

The link to the recovery file you mentioned in this post points to http://www.imnuts.org/downloads/charge/1209_charge_recovery.tar.md5.
Please update your link.
I no longer have permission to distribute the CWM file that imnuts made. The file has also been removed from the file system path that the web server has access to, meaning that it's outside of the public_html folder.
I do realize that some people still want the older 4.0.1.4 version of CWM but you will have to ask Imnuts for that file. Like I said, I do not have permission to distribute that file anymore.

trparky said:
The link to the recovery file you mentioned in this post points to http://www.imnuts.org/downloads/charge/1209_charge_recovery.tar.md5.
Please update your link.
I no longer have permission to distribute the CWM file that imnuts made. The file has also been removed from the file system path that the web server has access to, meaning that it's outside of the public_html folder.
I do realize that some people still want the older 4.0.1.4 version of CWM but you will have to ask Imnuts for that file. Like I said, I do not have permission to distribute that file anymore.
Click to expand...
Click to collapse
Sure thing just updated post thank you for making me aware

I cant get the md5 for match for this file. I've downloaded over and over and it still doesnt match. what do i need to do?
"Next download this:
MD5: E9A01D028362387332C46F5FB32C23A6
This is CWM your main interface that will be used when loading roms, etc"
The others matched with no problem.
Help!

The correct MD5 signature for that file is 9C41377FDCDB341310BC8C25D0794D6D.

A one-step ODIN using dwitherell's deodexed odin rooted stock file as described here is so much simpler, IMO.

how to get the Root? There is a method in one click.

trparky said:
The correct MD5 signature for that file is 9C41377FDCDB341310BC8C25D0794D6D.
Click to expand...
Click to collapse
Thanks I have the OP fixed now

KapTmaH said:
how to get the Root? There is a method in one click.
Click to expand...
Click to collapse
Didnt think there was a one click for our device? Didnt see it listed.

No, there isn't a "one-click-root" for the Droid Charge.
Sent from my SCH-I510 using Tapatalk

I'm pretty sure there is no one click root for our DC. Im not a fan of one click root learning how to root manually will get you comfortable with flashing with Odin and CWM which you will need to flash roms, kernels, etc.
Sent from my SCH-I510 using xda premium

Will this root method wipe all my data? I dont want to lose my data...

heathro1281 said:
Will this root method wipe all my data? I dont want to lose my data...
Click to expand...
Click to collapse
no this method will not wipe any data
Sent from my SCH-I510 using xda premium

Props to you ztkryan!!
Spent hours trying to find something simple to explain this process. There are tons of people trying to explain this but nobody can seem to do it in a step by step list.
Simple, clear and concise ;D

I did all the following steps as stated, and when I run Root Checker, it states "Sorry, you do not have proper root access."
Am I the only one receiving this error? Does anyone know what I am doing wrong perhaps?

slapshot591 said:
I did all the following steps as stated, and when I run Root Checker, it states "Sorry, you do not have proper root access."
Am I the only one receiving this error? Does anyone know what I am doing wrong perhaps?
Click to expand...
Click to collapse
I had that problem one time to fix it make sure you mount system before reflashing the superuser.apk in cwm
Sent from my SCH-I510 using xda premium

ztkryan said:
I had that problem one time to fix it make sure you mount system before reflashing the superuser.apk in cwm
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
Giving this a try right now, I will return with results. Thanks again.
EDIT: Mounting System fixed my issue. I really appreciate your response ztkryan.

slapshot591 said:
Giving this a try right now, I will return with results. Thanks again.
EDIT: Mounting System fixed my issue. I really appreciate your response ztkryan.
Click to expand...
Click to collapse
just an FYI if you rebooted your phone you will have to install cwm again (stock kernel overwrites recovey to stock recovery on boot)
Sent from my SCH-I510 using xda premium

I must have missed something, I have root and that seems to be working fine but when I try to get back into CWM to do a backup by holding the up volume + power & home it appears to take me into a stock recovery. Did I do something wrong?

Rodhargis said:
I must have missed something, I have root and that seems to be working fine but when I try to get back into CWM to do a backup by holding the up volume + power & home it appears to take me into a stock recovery. Did I do something wrong?
Click to expand...
Click to collapse
You didn't do anything wrong to make cwm stick you have to flash a custom kernel the stock kernel overwrites custom recovery on boot
Sent from my SCH-I510 using xda premium

[Q] Infuse zip flashing stuck at "Finding update package"

Hi guys, this is the first post i upload and want to take the occasion to greet you all.
In these days i bought a Samsung Infuse 4G...i really like this phone but want to be able to use it with some special features such as connecting various USB devices to the phone and other juicy stuff.
I read that the builtin ROM is not capable of such this thing, and Ice Cream Sandwitch, witch should allow to do that, is not available for this smartphone model. At least not officially.
My choice fell upon CM7 LinuxBozo ROM ( http://forum.xda-developers.com/showthread.php?t=1311960 ).
I rooted my device. I'm sure of that because i am able to use the root explorer with root privileges and the root menu shows up among my applications.
I then followed the instructions here ( http://forum.xda-developers.com/showthread.php?t=1107881 ) in order to install the ClockWorkMod Flashing Menu but I am not sure whether anything went allright or not as, after trying both the methods shown on the guide, nothing happened (in the first case, the automatic install through ROM Manager seems to work, a message appears on the screen confirming anything went smooth but when i reboot i see the normal reboot menu, no advanced menu nor CWM menu; in the second case i tried to manually load the CWM menu by placing the update file in the SD and renaming it to update.zip, the update gets stuck somewhere saying something about a bad or wrong signature, tried it a few times and with different CWM update versions but nothing to do).
I then stumbled into a workaround to fix that issue by an even more manual procedure ( http://www.youtube.com/watch?v=PkMo8rBehHg&feature=related ) basically consisting in copying the "recovery" executable from the CWM update archive to the directory /system/bin and of course chmodding it to rwxr-xr-x and chowning it to the root.
Now the CWM screen appears but, as i attempt to flash the CM7 ROM, the flashing gets stuck at "Finding update package". I read here ( http://forum.xda-developers.com/showthread.php?t=821499 ) that it could happen sometimes and it's just a matter of trying and trying again... I tried at least ten times up to now but it keeps getting stuck...maybe it's not my case.
Hope someone will help me out...i really need that USB reading feature. Thank you.

baareem said:
Hi guys, this is the first post i upload and want to take the occasion to greet you all.
In these days i bought a Samsung Infuse 4G...i really like this phone but want to be able to use it with some special features such as connecting various USB devices to the phone and other juicy stuff.
I read that the builtin ROM is not capable of such this thing, and Ice Cream Sandwitch, witch should allow to do that, is not available for this smartphone model. At least not officially.
My choice fell upon CM7 LinuxBozo ROM ( http://forum.xda-developers.com/showthread.php?t=1311960 ).
I rooted my device. I'm sure of that because i am able to use the root explorer with root privileges and the root menu shows up among my applications.
I then followed the instructions here ( http://forum.xda-developers.com/showthread.php?t=1107881 ) in order to install the ClockWorkMod Flashing Menu but I am not sure whether anything went allright or not as, after trying both the methods shown on the guide, nothing happened (in the first case, the automatic install through ROM Manager seems to work, a message appears on the screen confirming anything went smooth but when i reboot i see the normal reboot menu, no advanced menu nor CWM menu; in the second case i tried to manually load the CWM menu by placing the update file in the SD and renaming it to update.zip, the update gets stuck somewhere saying something about a bad or wrong signature, tried it a few times and with different CWM update versions but nothing to do).
I then stumbled into a workaround to fix that issue by an even more manual procedure ( http://www.youtube.com/watch?v=PkMo8rBehHg&feature=related ) basically consisting in copying the "recovery" executable from the CWM update archive to the directory /system/bin and of course chmodding it to rwxr-xr-x and chowning it to the root.
Now the CWM screen appears but, as i attempt to flash the CM7 ROM, the flashing gets stuck at "Finding update package". I read here ( http://forum.xda-developers.com/showthread.php?t=821499 ) that it could happen sometimes and it's just a matter of trying and trying again... I tried at least ten times up to now but it keeps getting stuck...maybe it's not my case.
Hope someone will help me out...i really need that USB reading feature. Thank you.
Click to expand...
Click to collapse
what color is your cwm screen?
this may be a simpler way of gettin cwm:
http://forum.xda-developers.com/showthread.php?t=1220090
specifically, the CWM instructions set.

I see that the instructions you suggested me would mean to start the process almost from scratch. I will do that as soon as i finish studying the nazis for my school report .
And maybe after getting the next answer from you
The boot screen is green text on black backgroud.
Holding audio and power buttons for 10 seconds doesn't prompt me to the red boot screen if it was what you meant and if I read the instructions provided well (witch i didn't as i have no time now)... don't get me wrong. Just trying to provide you as more information as possible.

baareem said:
I see that the instructions you suggested me would mean to start the process almost from scratch. I will do that as soon as i finish studying the nazis for my school report .
And maybe after getting the next answer from you
The boot screen is green text on black backgroud.
Holding audio and power buttons for 10 seconds doesn't prompt me to the red boot screen if it was what you meant and if I read the instructions provided well (witch i didn't as i have no time now)... don't get me wrong. Just trying to provide you as more information as possible.
Click to expand...
Click to collapse
if you still have root, download from market
sgs kernel flasher and the flash the gingerbread kernel to give you RED recovery and flash the rom of your choice after a factory reset and usual wipes

Cool... i'm now running CM7 !
Here is what i missed for anyone who would have the same problem in the future (you can find the download links here: http://forum.xda-developers.com/showthread.php?t=1220090 ):
CWM Installation Instructions:
1) You must be rooted.
2) If you have a /Voodoo folder on your internal SD card, delete it and reboot.
3) If you're already running a custom ROM with Voodoo lagfix FULLY enabled, you can skip to step 7.
4) Download CWM-community-kernel-v8.zip if you're on Froyo or CWM-infused-v2.0.1-kernel.zip if you're on Gingerbread and place it on your internal SD card.
5) Install SGS Kernel Flasher from the Market.
6) Open SGS Kernel Flasher, select choose kernel, select the file you downloaded, and select flash kernel. Your phone will reboot and begin to enable Voodoo lagfix. Let it do that and boot all the way up. It will take a while (5-10 minutes) because it's converting all partitions to ext4.
7) Download update-infused-v2.X.X-full.zip and place it on your internal SD card.
8) Power off your phone.
9) With the phone powered off, hold both volume keys and the power button for about 10 seconds and then release. This should boot you into RED CWM.
10) Select "install zip from sdcard" and select update-infused-v2.X.X-full.zip.
11) Once that finishes, select "wipe data/factory reset".
12) Select "reboot system now".
13) Do NOT restore system data with Titanium Backup. Do NOT restore ALL apps with data. If you absolutely must restore something with Titanium Backup, only restore MISSING apps with data.
Click to expand...
Click to collapse
Now just another question: i noticed different errors when running the market and other old built-in apps... I just need to reinstall gapps right?

yeah, that is why it's stickeyed.
you just had to read/search them.
market wise, there's a market fix
or you can also factory reset and wipe cache and dalvik in cwm

Thanks. You helped me solving this and now anything works fine. Have a good day.
Thread (NOT) SOLVED.
--------
(Edited after realizing gapps still don't show up as installation didn't really worked)

baareem said:
Thanks. You helped me solving this and now anything works fine. Have a good day.
Thread SOLVED.
Click to expand...
Click to collapse
np. take it easy, bro.

I was too quick saying it worked.
The Infuse just booted up but nothing changed. I then tried to do the zip installing through rom manager again but invane.
When trying with the manual install it promts me with this error:
E: Can't open /emmc/gapps-gb-xxxxxxx-signed.zip
(bad)
Installation aborted.
Click to expand...
Click to collapse
I tried different versions of gapps including the one suggested in the CM wiki but with no luck. I guess the problem is somewhere else.
PS: now i see the blue on black bootscreen as in order to install gapps with rom manager i was asked to reinstall CWM trough it...

baareem said:
I was too quick saying it worked.
The Infuse just booted up but nothing changed. I then tried to do the zip installing through rom manager again but invane.
When trying with the manual install it promts me with this error:
I tried different versions of gapps including the one suggested in the CM wiki but with no luck. I guess the problem is somewhere else.
PS: now i see the blue on black bootscreen as in order to install gapps with rom manager i was asked to reinstall CWM trough it...
Click to expand...
Click to collapse
what version of ROM were you running when you tried this?
Stock FRoyo?

Cyanogenmod 7 ... exactly this version : http://forum.xda-developers.com/showthread.php?t=1311960
Kernel version is 2.6.35.7 , android v 2.3.7.
The old, OOB version i had was froyo 2.2.6 if i well remember.

baareem said:
Cyanogenmod 7 ... exactly this version : http://forum.xda-developers.com/showthread.php?t=1311960
Kernel version is 2.6.35.7 , android v 2.3.7.
The old, OOB version i had was froyo 2.2.6 if i well remember.
Click to expand...
Click to collapse
I haven't played with CM7, it's not an infuse based rom.
I recall some installation issues with it.
I remember an unsuccess reboot intially and pull battery thing..not sure.
If you're looking to install another rom, odin back to stock and start over.
check out my sig line for some useful links

Samsung Galaxy Exhilarate: How to Root it.

ALL:
It has been a long time since I posted to this thread. Back then, the Samsung Exhilarate had just come out, and there was no way to root it. Thanks to several other members, most notably j3r3goss and shabbypenguin, I was able to get root on this phone. As of now, this post is very old. The instructions here, are not needed for you to root your Samsung Exhilarate anymore. You are free to read through them, but you should pay attention to the last page (currently page 3). There, j3r3goss posted a link to the the TWRP or CWM recovery files, that you can now use to get root, without following the step-by-step instructions I posted below. I'm leaving the thread up, but for all intents and purposes, consider it closed.
Here's the link to the section you need in order to root your phone:
http://forum.xda-developers.com/show...php?p=32520094
It has been fun, and I've been using my Exhilarate for nearly two years. Because I've been extremely busy, I haven't had time to keep up with the latest changes - but others have. I hope that you found these instructions useful.
In any case, take care and ROOT ON!
Everything past this point is old and no longer applicable
==========================================
IMPORTANT NOTE: If you have UPDATED your phone to ICS, and want to root it, these instructions will work. You will not need to do the last part where you need to update the firmware keys!
Do you plan to update your phone from Gingerbread (Android 2.3) to Ice Cream Sandwich (Android 4.0). Do that first! Otherwise, you'll just have to root again (not that that's a problem, but why???)
I) How to update to ICS:
1) Download Samsung Kies from here: http://www.samsung.com/us/kies/ if you haven't already, and install it, and then run it
2) Put your phone into ODIN (Download mode - see section II below).
3) When Kies detects you phone (your computer will need to install drivers, and then Kies will say it's connecting to your phone, and it will take about 3-4 minutes and finally connect to it), it should let you know that there is an update. Just follow the instructions on Kies and be patient. The phone will update, and once it reboots into normal mode, you'll know it's updated by going to "Settings" and if they are grouped into different sections, then you have ICS. Otherwise, you probably still have GB.
II) How to enter ODIN Mode:
For the Exhilarate I've found it's best to use this sequence:
1) Power phone down
2) Plug the USB cable into your computer (do not plug the phone into the USB cable yet).
3) While pushing and holding both the vol up and vol down buttons, plug the phone into the computer. As soon as you see "SAMSUNG" flash and then dissappear, release the buttons.
4) Phone should boot into ODIN mode.
III) How to Root
What you need:
1) Samsung Galaxy Exhilarate phone (unrooted)
2) microSD Card (any size of 1GB or larger will work)
3) USB cable to connect your phone to your computer
4) Files below
First, download all the files...
1) Download the latest version of ODIN here: ODIN.
2) Download the drivers here: Samsung Galaxy Drivers and run the setup program after unzipping.
3) Download the tar file here: www.Shabbypenguin.com/OUDstuff/Blaze4G/Clockworkmod-Blaze-4G.tar Don't mess with it, just download it somewhere where you can find it later
4) Download SuperUser here: SuperUser Save it somewhere where you can find it later.
Second, conduct the root:
1) Put your phone into Odin (Download mode - see Section II above).
2) With phone in ODIN mode, run Odin.1.85.exe (it's in the folder where you unzipped ODIN too).
3) Odin will launch on your computer. It should show, in the first box under ID:COM, a port in yellow. Mine was Port 5. This means you have successfully connected to your phone.
4) Click the button in ODIN labeled "PDA", and then browse to the .tar file you downloaded above and then select "Open". The file will show up next to the PDA button.
5) Make sure that "Re-Partition" is NOT checked!;
6) Click "Start" and wait till your phone reboots. It should reboot into normal mode. If it doesn't, just power down and reboot into normal mode.
7) Copy the SuperUser.zip file you downloaded above to your phones microSD card.
8) Reboot the phone into recovery mode: While pushing and holding both the vol up and vol down buttons, push the power button. As soon as you see "SAMSUNG" flash, release the buttons. You shouldn't need to have the phone connected to the computer this time. The phone will boot into CWM recovery.
9) using either: the "menu" button to move down and the "home" button to move your selection up; or alternately the volume down button to move down, and the volume up button to move up: highlight "install zip from sdcard". Use the "search" button or power button to select/enter.
10) highlight "choose zip from sdcard" and press the "seach" button to select it.
11) browse to the directory which you copied SuperUser to and select it.
12) scroll down to "Yes - Install Superuser" and select it.
13) Once done, reboot your phone into normal operating mode.
14) If rooting Gingerbread, see Section IV below.
15) If rooting either Gingerbread or ICS, see section V below.
16) If having issues with Root, see section VI below.
IV) Rooting Gingerbread?:
Last: Finish up (Steps 1-4 are ONLY needed if you are still using GingerBread and not Ice Cream Sandwich):
NOTE: Your buttons (the four at the bottom) WILL NOT work at this point. You need to do the following:
======
1) Push your phone dialer as if you were going to make a call.
2) Dial *#*#2663#*#*.
3) You will see the attached thumbnail below on your phone (stolen from j3r3goss).
4) press the bottom button that says "Touch key FW update". Wait. Once it's finished, your bottom row of buttons will work again!
Note: If you are on GB, and not ICS, every time you boot into recovery and then back into operational mode, you will need to do the four steps in this section above!
======
V) Using either GB or ICS:
You do need to do these last steps (I believe):
5) ADDENDUM/UPDATE: At this point, there is one last thing you need to do!: You must go to "Settings/Applications/Development" and Enable USB Debugging! If you don't do this, you will NOT be able to get root access! Also, if for any reason you turn off USB Debugging, make sure you turn it back on! If you lose root access, check this FIRST! If you still can't get root access, boot into recovery mode and wipe the Dalvik Cache, the regular Cache, and "Fix Permissions". Then double check to make sure USB Debugging is ENABLED!
6) You're done! Your phone is now rooted and you can do whatever you want! :highfive:
VI) TROUBLESHOOTING:
If you run into problems
1) Check to make sure that SuperUser is installed on your phone. Check the apps section first, and then, use RootExplorer and check the System/bin folder. If you see SuperUser is in the system/bin folder, then you are very close to being rooted.
If it is not installed:
a) make sure that you copied the superuser.zip file to the EXTERNAL sdcard.
i) Boot the phone up normally
ii) plug the phone into your computer, pull the notification bar down, select USB connection, and tap the "Connect USB storage" button.
iii) Using Winbloze explorer, copy the SuperUser.zip to the external sdCard (on my computer, it is drive F:, and the Internal is drive G.
iv) disconnect once the copy is finished and use any file explorer on your phone to check the contents of the external sdCard (look in the "sdcard/external_sd" folder)
v) if it's not there, then you are doing something wrong. If it is there, shut down the phone, and boot into CWM recovery.
vi) Use CWM recovery to install the superuser.zip file on your phone.
vii) reboot into normal mode
viii) check to make sure that you have enabled USB Debugging
viii) check again to see if SuperUser is now in your apps, and in the system/bin folder.
ix) Run SuperUser 1x, and then close it out.
x) Run ANY app that requires Root Permissions. You should get a request from SuperUser to "Allow" or "Deny" the app root access. Make sure you allow root access. If you make a mistake, you'll need to launch superuser again and completely remove the app from the denied list.
2) Make sure USB Debugging is enabled.
3) if you still can't get root, boot into CWM Recovery, and try clearing the cache and the Dalvik cache, and resetting permissions, then reboot and check everything again. You may need to do this last step several times.
Beyond that, I don't know what else might be causing you to not gain root access, so keep trying.
If anyone has any questions, feel free to PM me.
V/R
BlackWolf

Thanks for the write-up Black-wolf.
I wasn't aware that the touch key fw needed to be updated each time after booting recovery,hopefully that is something that will be fixed when Shabbypenguin gets his hands on the stock recovery.
Personally I find the easiest, works every time method to get into Download mode is to have the usb cable plugged into the pc, then while holding the volume up/down buttons, plug the cable into the phone, continue holding vol up/down buttons until download mode boots.
Sent from my Liberty using xda premium

j3r3goss said:
Thanks for the write-up Black-wolf.
I wasn't aware that the touch key fw needed to be updated each time after booting recovery
Click to expand...
Click to collapse
Yeah, I figured that out when I went to boot recovery to check something, and then came out of it and the keys weren't working again... :/ At least there's a work around. I suspect, that this is something that an automated app could handle if Shabby or someone else doesn't come up with a permanent fix.
V/R
BlackWolf

Can someone update the links??.....

Fixed
JUSMEJOSE said:
Can someone update the links??.....
Click to expand...
Click to collapse
Links are all working now. There was only one broken one that I'm aware of. Let me know if there are others.
BlackWolf

Any update on getting the stock recovery? I blew through rooting my Exhilarate before I noticed the request for help or I would have offered.
The root seems to be working OK for me. JuiceDefender is working great with it to throttle the CPU clock speeds and has really improved my battery life. Also worked OK in blocking all the bloatware apps with the Gemini App Manager. So I don't really have a reason to unroot and go back to stock firmware, but it would be nice to have the option available should I ever hit a problem.
Thanks for all you guys hard work!
DK

I just needed this tutorial!, Good job.
Thanks!

Dream_Killer said:
Any update on getting the stock recovery? I blew through rooting my Exhilarate before I noticed the request for help or I would have offered.
The root seems to be working OK for me. JuiceDefender is working great with it to throttle the CPU clock speeds and has really improved my battery life. Also worked OK in blocking all the bloatware apps with the Gemini App Manager. So I don't really have a reason to unroot and go back to stock firmware, but it would be nice to have the option available should I ever hit a problem.
Thanks for all you guys hard work!
DK
Click to expand...
Click to collapse
domobile said:
I just needed this tutorial!, Good job.
Thanks!
Click to expand...
Click to collapse
Dream_Killer: No, we have not gotten a stock recovery. I've had several inquiries into it, but so far as I know, Shabby has not been able to help out in this regard. I am willing to try myself, but I'll need an un-rooted (and it must never have been rooted) phone.
domobile: Glad it worked for you.
V/R
BlackWolf

Black-wolf said:
Dream_Killer: No, we have not gotten a stock recovery. I've had several inquiries into it, but so far as I know, Shabby has not been able to help out in this regard. I am willing to try myself, but I'll need an un-rooted (and it must never have been rooted) phone.
domobile: Glad it worked for you.
V/R
BlackWolf
Click to expand...
Click to collapse
To get into stock recovery you...
1. open a command terminal on your computer.
2. type cd (where ever you have your ADB located on your computer) for example my is located in desktop/platform-tools so the command would be "cd desktop/platform-tools"
3. type "adb"
4. type "adb reboot recovery"
Presto you are in stock recovery.

ChefAnt said:
To get into stock recovery you...
1. open a command terminal on your computer.
2. type cd (where ever you have your ADB located on your computer) for example my is located in desktop/platform-tools so the command would be "cd desktop/platform-tools"
3. type "adb"
4. type "adb reboot recovery"
Presto you are in stock recovery.
Click to expand...
Click to collapse
We know how to boot into the stock recovery. What we need is to pull the stock recovery image off of the phone so that we can restore the phone to stock.
Btw.. pressing both volume keys while turning on the phone will get you there also.

I rooted the exhilarate. Loaded the t mobile blaze cm7 rom. And all works like a charm. The only thing is you can't make a call. You can,you just can't hear. I called my other phone and it went through. The speaker doesn't work. Mms and all works. Just not the speaker...... why? This wud. Be a awsome rom for this phone.. think we can find a fix?

harley1rocker said:
I rooted the exhilarate. Loaded the t mobile blaze cm7 rom. And all works like a charm. The only thing is you can't make a call. You can,you just can't hear. I called my other phone and it went through. The speaker doesn't work. Mms and all works. Just not the speaker...... why? This wud. Be a awsome rom for this phone.. think we can find a fix?
Click to expand...
Click to collapse
I'm not exactly sure but it might be just as simple as replacing the audio libs on the blaze rom with the ones from the exhilarate. I'm not sure which files though.
I'm curious if by coming together (blaze and exhilarate users) if there would be enough interest to get official cm support. if the only major diff is audio they could basically support 2 devices for the price of one.
Sent from my SAMSUNG-SGH-I577 using xda premium

If i knew/or had the kno how,shoot id do it. Is there a program u need to change the libs?. This is a pretty sweet device.

i think you just need root explorer, and copy the new ones over the old ones. I'll look to see if i can find out which files need swapped. Should be able to make a zip to flash through CWM recovery.
Sent from my SAMSUNG-SGH-I577 using xda premium

Man,im good at alotta things,buildin houses,workin on diesels,and flashin roms to my s3 and note,what i cant figure out is building roms. Im sure gettin this speaker workin has somthin 2 do with dismantling blaze cm7 rom and find the fix.
Another words,im good,but not that good. If som1 held my hand thru it,i cud do it. Or just show me

NFC for Exhilarate!
All: rodracruz found a thread for enabling NFC on AT&T phones. Apparently, the Samsung Exhilarate does have NFC - but why the hell AT&T has it disabled, I have not idea... In any case, check out this thread and follow the instructions to enable it on your phone: http://forum.xda-developers.com/showthread.php?t=1545751
There are even links as to some of the things you can do with NFC.
V/R
BlackWolf

Black-wolf said:
All: rodracruz found a thread for enabling NFC on AT&T phones. Apparently, the Samsung Exhilarate does have NFC - but why the hell AT&T has it disabled, I have not idea... In any case, check out this thread and follow the instructions to enable it on your phone: http://forum.xda-developers.com/showthread.php?t=1545751
There are even links as to some of the things you can do with NFC.
V/R
BlackWolf
Click to expand...
Click to collapse
Sweet, I was wondering, especially since this phone was released after the skyrocket.

Wolfman
Worked beautifully. You the man!
Thx

j3r3goss said:
I'm not exactly sure but it might be just as simple as replacing the audio libs on the blaze rom with the ones from the exhilarate. I'm not sure which files though.
I'm curious if by coming together (blaze and exhilarate users) if there would be enough interest to get official cm support. if the only major diff is audio they could basically support 2 devices for the price of one.
Sent from my SAMSUNG-SGH-I577 using xda premium
Click to expand...
Click to collapse
I'm pretty sure it wouldn't have anything to do with the audio lib files. More so most likely a kernel, modem, or APN problem.
Edit: not to mention the build.prop is completely written for the blaze. I'm working on some things. I'll let you guys know tonight. I wish there was source for this damn phone.

ChefAnt: There is a stock file from Samsung... read my post (about 2/3 of the way down):
http://forum.xda-developers.com/showthread.php?t=1828426
ChefAnt said:
I'm pretty sure it wouldn't have anything to do with the audio lib files. More so most likely a kernel, modem, or APN problem.
Edit: not to mention the build.prop is completely written for the blaze. I'm working on some things. I'll let you guys know tonight. I wish there was source for this damn phone.
Click to expand...
Click to collapse