Database Info

Sensation Back Cover paint/color coming off problems (Pics Added)

Well I just wanted to share with everyone my experience with the back cover and the color coming off after 1 1/2 weeks from the retail box. When I called HTC they did not give me any problems and sent me a new one.
I have kept the phone on Micro-Fiber cloths and what short time it is in a case it is in the T-Mobile sleeve for the Sensation which is soft inside. So I know it is not my use which caused it, the case is possible but I doubt it.
Bottom line is I think their could be some paint/color issues with the back cover so keep a watch for it and if you notice it call HTC and get a replacement.
So has anyone else experienced this? Please leave your comments.
Here is a couple of pictures of mine. You can see the area where the color is coming off just to the right and a little below the camera opening.

It looks like normal wear and tear from the body oils on your hands. I hope that isn't the case and their was some real issue. If this "issue" happens again I probably wouldn't ask for another case personally. On the bright side you can probably sell that other case for like $40 right now.
Sent from my HTC Sensation 4G using XDA Premium App

Same thing happened to me the first week I had the phone... I returned mine to T-Mobile for another one. Glad to see I wasn't the only one! Good luck with the replacement cover.

BonesRed said:
It looks like normal wear and tear from the body oils on your hands. I hope that isn't the case and their was some real issue. If this "issue" happens again I probably wouldn't ask for another case personally. On the bright side you can probably sell that other case for like $40 right now.
Sent from my HTC Sensation 4G using XDA Premium App
Click to expand...
Click to collapse
Well I would agree with you if it had been 6 months, but not 12 days. Maybe I have atomic hands LOL

bobsbbq said:
Well I would agree with you if it had been 6 months, but not 12 days. Maybe I have atomic hands LOL
Click to expand...
Click to collapse
LOL yeah I guess! I never touch my actual phone though so I wouldn't know =)
Sent from my HTC Sensation 4G using XDA Premium App

Maybe having it in your pocket is rubbing it away..
Sent from my HTC Sensation 4G using XDA App

leyvatron said:
Maybe having it in your pocket is rubbing it away..
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
No when it leaves the micro fiber cloth it goes in to the slip pouch. I'm very protective of my phones and I will never put one of my phones in my pocket unprotected.
Other phones I have like the thunderbolt and MT4G I have never had this problem.
I just hope the new case holds up better.

Happened with my XPERIA X1 (made by HTC), happened to my N1, and now it will probably happen to my Sensation. Good to know.

Perhaps it's the skip pocket and the constant slipping in and out of something that fit's so tightly.
Sent from my HTC Sensation 4G using XDA Premium App

BonesRed said:
Perhaps it's the skip pocket and the constant slipping in and out of something that fit's so tightly.
Sent from my HTC Sensation 4G using XDA Premium App
Click to expand...
Click to collapse
Perhaps but the slip case is from T-Mobile and for the sensation and is lined with a soft material. And I mean how many times I could have taken it in and out over 12 days period is, well not that many times as while I'm working I use my work phone.
I might try a different case on this new back cover to see if it makes a difference.

I feel like all phone covers with this surface will be rubbed off eventually

I am having the same problem. I've had the phone 3 weeks, and it is looking pretty bad. It only seems to affect the top third of the case. I'll try calling HTC...
btw, I am also using the t-mobile slip case...

Good thing I got a cover for it to avoid this. Although this does look like normal wear and tear.

asj2583 said:
Good thing I got a cover for it to avoid this. Although this does look like normal wear and tear.
Click to expand...
Click to collapse
You think this looks like normal wear and tear for a 12 day old phone? I would agree if the phone was older maybe but if the paint is coming off this quick after purchase I just can't see it being normal. Also this phone has been in a case when not on my micro fiber cloth.

I think it's your atomic hands. Or too much Texas BBQ!
I've had mine 35 days now and no visible wear on the cover. I have ZERO protection on my phone and it's either in my cheap holster during work or taking up it's solo pocket location in my jeans/shorts. My holster interior is not really that soft and I holster the phone a ****load throughout the day. Honestly... I would expect my phone to have a lot of wear already. I've been in love with the sexy feel of this phone since day one and find myself holding and caressing it sometimes even when I'm not using it.
Not sure if that helps or not but due to my holster and my almost perverse fascination with the feel of this device I would expect to see some wear on mine.

Exact reason I got my tpu Case. Need to keep the resale value up.
Sent from my HTC Sensation 4G using XDA Premium App

Matt1408 said:
Happened with my XPERIA X1 (made by HTC), happened to my N1, and now it will probably happen to my Sensation. Good to know.
Click to expand...
Click to collapse
I'm pretty sure the xperia x1 was made by Sony not htc
Sent from my HTC Sensation 4G using XDA App

I got my sensation fully covered by zagg shield and mine had been perfectly protected by that so maybe you think about in investing in a fully body shield
Sent from my HTC Sensation 4G using XDA App

tbubba said:
I'm pretty sure the xperia x1 was made by Sony not htc
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
No it was definitely made by HTC, just sold by Sony. Because Sony could never produce a decent device. And THAT phone had a problem with its backcover, horrible I finished with rubbing ALL the color off, basically turning the black model into a silver model Looked as if it were new. But I think that's kinda hard to do with the Sensation because there are electronics in the cover. Or is it just metal parts for the antenna?

Firefall! said:
No it was definitely made by HTC, just sold by Sony. Because Sony could never produce a decent device. And THAT phone had a problem with its backcover, horrible I finished with rubbing ALL the color off, basically turning the black model into a silver model Looked as if it were new. But I think that's kinda hard to do with the Sensation because there are electronics in the cover. Or is it just metal parts for the antenna?
Click to expand...
Click to collapse
I also had X1 and the exact same thing happened to me. The cover changed the color from black to silver

HTC Sensation Otter Box Coming SOON!!! $34.95

WOOT!!!! about damn time!! @[email protected]
http://www.otterbox.com/HTC-Sensation-4G-Commuter-Series-Case/HTC4-SENSA-20-E4OTR_A,default,pd.html
Uh oh i dont see the vent holes tho -_-
is that going to be an issue?

why are they releasing it without holes for the rest of the antenna?
my cheap tpu case has all the holes... wtf otterbox?

Looks nice but missing holes. It looks like they have a little door that protects the mini usb. Sweet!!!!! Hope they fix the holes on back. Not the end of the world tho. Just drill them out.
Sent from my HTC Sensation 4G

I have a case without any of the holes and I find no problem at all. also i think the girth of it fixed my death grip issues too.

He said girth you probably are fine. Guess you dont record guitar into your phone or need your mic then
Sent from my HTC Sensation 4G

Sent from my HTC Flyer P512

This looks very nice, might order one when it comes out.
Sent from my HTC Sensation 4G

i used htc casemate tough case with no holes and the antenna or signal didnt drop at all even wifi... so i guess it's not an issue ?

MxFadzil92 said:
i used htc casemate tough case with no holes and the antenna or signal didnt drop at all even wifi... so i guess it's not an issue ?
Click to expand...
Click to collapse
What happened with the noise cancellation mic then?

So if you look at the photo of the back of the case you will see that the mic for noise cancellation is exposed.
Sent from my HTC Sensation 4G using XDA Premium App

kitchencop said:
So if you look at the photo of the back of the case you will see that the mic for noise cancellation is exposed.
Sent from my HTC Sensation 4G using XDA Premium App
Click to expand...
Click to collapse
Yes, the back mic hole is exposed. And the others do not need to be exposed. In fact, it probably helps to present a build up of dust by not exposing them.
Sent from my HTC Sensation 4G using XDA Premium App

I don't understand why people get excited for these commuter cases. The corners are barely protected and the case eventually ends up stretching. I've owned 3 between my Nexus One and myTouch 4G and it's the same thing every time. It's the Defender series people should be excited about. Those are some serious cases.

I also prefer a hard case rather then these commuter cases. I got the Mobi hard case and love it it has a nice feel and the phone is really protected.

Yeah those holes have absolutely nothing to do with cell reception. I believe you will find TPU cases reduces your cell reception. Install a cell reception graphing app like OpenSignal and see for yourself. Mine is laying in the corner on the floor (where I last chunked it) only because I have yet desired to expend the energy needed to throw that garbage in the trash.
I am ashamed that such a predominant company would make such a fantastic phone with such a weak design for the antenna.

awesome, what holster can be used with this? Do they sell a compatible holster?

now available

I bought one and unfortunately I have been getting many complaints about the microphone being muffled. Can anyone give advice about another good hard case? Maybe something a little more beefy.
Sent from my HTC Sensation 4G using XDA App

Case mate Pop! Case

I just noticed these on the casemate website. Looks similar to the tough case. Someone should buy one and let me know how it is lol.
Sent from my HTC Sensation 4G using XDA App

Paticakeman said:
I just noticed these on the casemate website. Looks similar to the tough case. Someone should buy one and let me know how it is lol.
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
damn nicer than the tough case !!! should have wait a little bit more....

I'm buying one.....I just can't decided between white or black!

Ok I'll say it.....
"But the holes are covered!"

i using tough case and which like you said holes are covered and there still isnt any issues... ?

jayvo said:
I'm buying one.....I just can't decided between white or black!
Click to expand...
Click to collapse
i would say white but white easily caught dirt?...

Is this, like their tough case, two pieces that fit into each other?
On the web page, they make it seem like they have formed the two plastics of this case into one piece but I can't tell.

I think its still two piece. I vote white!
Sent from my HTC Sensation 4G using XDA App

Constrabus said:
Is this, like their tough case, two pieces that fit into each other?
One the web page, they make it seem like they have formed the two plastics of this case into one piece but I can't tell.
Click to expand...
Click to collapse
It is one piece made of two materials(hard rubberand plastic) and it does not have two layers,so it is very and I mean very difficult to put it on the phone and take it off.It id also easy to scratch because plastic is high gloss.i had it on Desire HD and swap it for Tough which offers much better protection.But I have to admit that Pop is looker

just ordered a white one today

Couple questions about this case.
1: Is the inner layer on this like soft sillicone?
(I'm not liking the harder material that TPU is on my phone. I can tell its wearing on the front corners and making the matte finish to be shiny.)
2: The only hole that im worried about is the one above the camera and it seems to be covered. Is this hole actually anything to worry about?
(They are all just mounting points for antenna contacts, but the one above the camera is the only one that leads to a hole in the phone housing.)
3: Can anyone post pictures of this yet?

Looks pretty sweet, Someone post some pictures once you receive it.

Incipio At&t

http://www.incipio.com/HTC-One-X-ATandT-Cases/HTC-One-X-ATandT-Cases.asp
Sent from my HTC One X using xda premium

looking good. i am in between this and case mate barely there.

Yup I was in the same predicament and I went with the case-mate barely there. I love the case. I went white on white. I don't need super protection but just want to protect from scratches and getting dirty.
Sent from my HTC One X using Tapatalk 2

i just noticed that incipio one covers more edges. so i think i am more leaning toward this...

Good to see they finally got them out, but im not sure if I would pick it up our not. When I had my SGS II I loved my NGP that I had on it, right now im rocking the diztronic tpu which is almost the same exact setup as the NGP.
Swyped from my HTC One X using XDA Premium.

Awww man I just jumped the gun two days ago on the barely there in black. Can anyone post like comparison pictures and compare them cuz I might end up buying the feather later.
Sent from my HTC One X using XDA

ethantarheels123 said:
Awww man I just jumped the gun two days ago on the barely there in black. Can anyone post like comparison pictures and compare them cuz I might end up buying the feather later.
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
From the pictures on the site, the feather looks exactly the same except the bottom part looks like it wraps around a bit further and the top has an extra piece that covers the middle section between the headphone jack and the power button.

Just ordered a feather. Will report back when I get it.
Sent from my HTC One X using xda premium

Just got my feather in and I can tell you that there is a reason they don't show you what it looks like directly from the front. The case is much thicker than they would lead you to believe and is pretty damn ugly when it's on. I will never use this case.

^dang sorry to hear that
Well Im going get mine in the mail soon so I guess I know what to expect

_MetalHead_ said:
Just got my feather in and I can tell you that there is a reason they don't show you what it looks like directly from the front. The case is much thicker than they would lead you to believe and is pretty damn ugly when it's on. I will never use this case.
Click to expand...
Click to collapse
Can you tell us if the case will be able to protect the camera lens?

hanming said:
Can you tell us if the case will be able to protect the camera lens?
Click to expand...
Click to collapse
It is almost flush with the camera lens, MAYBE a little bit thicker. If you lay the phone down on its back it definitely does keep the camera lens off the table, there is like a .5mm gap that I can see through. So yes, but not by much.

_MetalHead_ said:
Just got my feather in and I can tell you that there is a reason they don't show you what it looks like directly from the front. The case is much thicker than they would lead you to believe and is pretty damn ugly when it's on. I will never use this case.
Click to expand...
Click to collapse
Can you post some pics??????????

Got mine today. A bit pricy imo, I try to not spend more than $10 on a case. Keeps the thin profile and the material actually makes the phone easier to grip. I like the fact that the front portion is flushed with the phone(not good for ppl who like putting their phones face down). Probably gonna be switching between this case and the Amzer case. Really liking it.

waljie said:
Got mine today. A bit pricy imo, I try to not spend more than $10 on a case. Keeps the thin profile and the material actually makes the phone easier to grip. I like the fact that the front portion is flushed with the phone(not good for ppl who like putting their phones face down). Probably gonna be switching between this case and the Amzer case. Really liking it.
Click to expand...
Click to collapse
Really like that! Thanks for posting looks like a winner to me!
Edit: Just purchased the Black Feather for my white HOX

I bought the Incipio feather in gray for my white HOX and I like the grippy/rubbery feel to the back. It's not my favorite case but I can definitely see me rocking it from time to time.

Really like that case waljie.
Sent from my HTC One X using xda premium

Been rocking the black with my white HOX. Love it!
Sent from my HTC One X using xda premium

They don't have a white case and I couldn't decide between buying the gray or the black for my white HOX. Finally settled on getting the gray one (I figured it didn't really matter since I'm planning on having a few cases sitting around to swap as my mood changes).

I've never been a huge fan of any soft plastc/silicone since they are huge dust and hair magnets. I have a jack russell and this thing loves to attract hair and pet dander.

[Q] Plastic ring around the camera

The plastic ring around the camera is making a creaking noise. My first one had the same issue along with creaky ear piece grill. So I exchanged it and amazon sent me a second one. After a while the second phone seems to have the same issue.
Just wondering how everybody else's phones are holding up. It's really annoying sometimes and I really don't want to exchange this for a third piece and then slowly have the same issue on that one too.

chaitoo said:
The plastic ring around the camera is making a creaking noise. My first one had the same issue along with creaky ear piece grill. So I exchanged it and amazon sent me a second one. After a while the second phone seems to have the same issue.
Just wondering how everybody else's phones are holding up. It's really annoying sometimes and I really don't want to exchange this for a third piece and then slowly have the same issue on that one too.
Click to expand...
Click to collapse
First of all I think the ring is aluminum. Also the way the device has been manufactured, it will have some creaks. Still a very sturdy phone. If you'd like, you can take it apart and reglue it back together with gorilla glue and it may solve the creaks

Please don't use gorilla glue on your phone... It foams up brown.
Sent from my HTC One X using xda premium

ECEXCURSION said:
Please don't use gorilla glue on your phone... It foams up brown.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Sorry, but LOL.
Sent from my HTC One X using Tapatalk 2

Nope its plastic It feels like its pretty high quality though
And mine is very sturdy

seh6183 said:
First of all I think the ring is aluminum. Also the way the device has been manufactured, it will have some creaks. Still a very sturdy phone. If you'd like, you can take it apart and reglue it back together with gorilla glue and it may solve the creaks
Click to expand...
Click to collapse
Nominating this for the "Worst idea ever" category.

I'm still trying to figure out how the creeking was discovered. I've never even touched that ring.
Edit: until now
Sent from my HTC One X using Tapatalk 2

TBH, my phone hasn't come out of the case and screen protector since inside the AT&T store when I bought it on launch day. So even if there was creaking, I wouldn't notice it through my case.

rohan32 said:
TBH, my phone hasn't come out of the case and screen protector since inside the AT&T store when I bought it on launch day. So even if there was creaking, I wouldn't notice it through my case.
Click to expand...
Click to collapse
True story!
Sent from my HTC One X using Tapatalk 2

I just pushed on my ring and can get it to make a slight clicking sound. How did you come to notice this? Mine is barely audible.

I refuse to check and see if my ring is creaky. Not gonna do it.

Son of Clicky!
This phone literally snaps into the plastic unibody. I'm not going to worry about the noises. (I hope)

Mine has the same issue with the creaking noise along the very top of the ring. I've considered the opposite of glue: a drop of gun lube along the edge so i don't hear it anymore. I just haven't been bothered enough to try it.

_MetalHead_ said:
I refuse to check and see if my ring is creaky. Not gonna do it.
Click to expand...
Click to collapse
So we're learning! :thumbup:
Sent from my HTC One X using xda premium

Wrong Section. Please keep all question related threads in Q&A. Thank You.
Thread Moved.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"If you choose not to decide, you still have made a choice"~Rush
Sent from my HTC One X, using XDA Premium.