Im trying to flash a kernel to my phone. I have tried both of the trinity kernels and faux's kernels. I have tried them with CM7.1.0.1 and some of the nightly builds but get nothing. All I get is a black screen like I have heard of most people getting. How can I fix this?
Basically the Kernel is newer than the ROM you're using. I can't comment on why it's not working with a nightly but I'll pm you the link for a ROM which I know from my own usage will work with those kernels.
Related
Hello XDA
I am loving this new build for MIUI I am running the new 108050 and I was wondering what kind of Kernal I can run with this rom or if you can help me figure out my problems.
In the OP jface states that one of the bugs that needs to be fixed is get the kernal support up to date because it would support anything up until nightly 85
I have downloaded fauxs kernals from 3.3 onward and everytime I load the kernals I get no sound and things start to get buggy?
Does the new Rom have this kernal issue fixed or do I just have a special phone
Same here
Sent from my LG-P999 using XDA Premium App
Likely that it doesn't play nice with these kernels
Miui doesn't play nice with the CM7 Kernels. It has bugs, even wit hthe new version(I had two battery pulls yesterday and some apps don't run). I tred Faux's kernel and wasn't able to hear calls....so I stuck to stock. It almost works, and with it being so pretty, that's enough for me.
I had read somewhere that morfic's trinity kernals play are compatible with MIUI...but that the camera can get a little wonky at times- and i have experienced this with the 1.7.29 version where the colors get messed up- but has anyone tried the trinity kernal on the 1.8.5 yet?
Thank you for your response I really do love MIUI I just wanted to undervolt
Hello Xda-developers community!
I have been having consecutive problems with trying to flash a custom kernel onto my Lg G2x.
I can successfully flash any custom ROM with ease, though when I go to flash the kernel, it installs successfully, but upon reboot the device never loads.
I gave it a good 10 minutes to load, though just sits at a black screen.
I'm not sure if I am doing something rong or not.
One of my attempts was to flash the Trinity kernel with CM7 already on my G2x, though upon successful installation, during reboot I simply get about a 5-10 second android robot logo, and then the screen just sits at black not loading.
If anyone would mind helping me solve this problem, or perhaps tell me if I am doing something wrong, I would greatly appreciate it!
If it doesn't boot then the kernel is not compatible with your rom. If you are running CM7 nightlies only the kernel supplied with it is compatible.
I have the latest CM7 release for the g2x at the moment.
I tried the Trinity Kernel with Bionix 2 and CM7, so far the same result.
I saw a you tube video promoting someone who had the Bionix 2 ROM and Trinity Kernel with each other. I tried flashing them both, but it never booted.
Are there any roms compatible with CM7 at the moment?
Or is it only the Eagle's blood ROM that has kernel compatibilities for the g2x.
iCraft said:
I have the latest CM7 release for the g2x at the moment.
I tried the Trinity Kernel with Bionix 2 and CM7, so far the same result.
I saw a you tube video promoting someone who had the Bionix 2 ROM and Trinity Kernel with each other. I tried flashing them both, but it never booted.
Are there any roms compatible with CM7 at the moment?
Or is it only the Eagle's blood ROM that has kernel compatibilities for the g2x.
Click to expand...
Click to collapse
The only kernels compatible with CM7 nightlies are the kernels packaged with the update zip for that nightly. Flashing anything else is just a waste of time and you are going to keep frustrating yourself to no end.
When you say the latest cm 7 for the G2x do you mean the latest nightly or the latest stable release 7.1? If you have the 7.1 you should be able to use the trinity ELP but if you are using a nightly build then you can only use whatever came with that build as Jboxer said already.
Edit There are a few that you can use for 7.1 not just trinity ELP just look in the thread for each kernel and they say which ROMS they are compatible with. Also eaglesblood 2.4 is based of cm7 so if it workes on EB 2.4 then it will work on cm 7.1. Also when you flash a kernel make sure you clear the cache and dalvik cache. And wehen you boot up for the firsdt time after clearing the dalvik cache it could take 10 min to boot up mikne usually takes about 5 minutes but I have seen it take up to 10 so keep that in mind.
I solved the problem, thanks! Now I was looking around for roms and I found an miui rom for the g2x.
I like the ROM, so any idea what kernel would work with that?
Sent from my LG-P999 using xda premium
Under developement, faux's kernels (based off cm7). 3 different types, cm7 stable, nightlies and a different version for nightlies. Miui works with one of his cm7 kernels. I believe it is 44s
Sent from my LG-P999 using xda premium
Ttabbal's Dragon 1.5.2 kernel for CM7 nightlies ..perfect combo!
Sent from my LG-P999 using xda premium
I'm having a hard time finding a compiled list of MIUI compatible kernels. Can someone point me in the right direction or compile a list? I'd like to find a battery saver kernel and an OC kernel that are working for MIUI. Will Trinity kernels work? When using CM7, those were the best ones I used.
I'm fairly certain that as of this moment both morfic's Trinity kernel and faux123's 0.4.4 kernel work on the latest MIUI.
Any kernel written for CM7-based roms will work.... thats why. None of them are written for MIUI specifically because it is CM7-based.
Hello everyone. I have been using cm9 rc2 since it dropped. I must say overall it's pretty great. I wanted to use a different kernel than the default but just can't seem to get one working. The main reason I want to change kernel's is because I'm getting random reboots and SOD. I have flashed all variants of guveor's kernel and the best I get is wifi flashing on and off with the aokp variant. Harmony kernel doesn't have working wifi and those are the only kernels that are apparently available. Anyone have any luck?
any body have try PA 4.2 Beta 4 and combine with furnace kernel, im having trouble here after flashing furnace kernel i stuck at lg logo does anyone know how to solve this? i really like this kernel
Goodsdept said:
any body have try PA 4.2 Beta 4 and combine with furnace kernel, im having trouble here after flashing furnace kernel i stuck at lg logo does anyone know how to solve this? i really like this kernel
Click to expand...
Click to collapse
PA 4.2 is an Android 4.4 (kitkat) ROM. Furnace Kernel only works with JellyBean based roms. This combo will not work no matter what you do.
If you use a KitKat ROM, you need to use a KitKat kernel. If you want a JellyBean Kernel (ie Furnace Kernel), look for a JellyBean ROM.
do you have any sugestion custom kernel? Im having problem using stock PA kernel
Goodsdept said:
do you have any sugestion custom kernel? Im having problem using stock PA kernel
Click to expand...
Click to collapse
What problems are you having with the stock PA kernel? Are you sure they are not ROM or APK bugs?
I usually stick with stock kernels and report to the dev issues I'm having. Often any issues I am having are either common issues and somebody found a solution (like using an older version of a particular APK) or are problems that are new to me (based on my config like using a govenor that is buggy with that particular ROM).
The biggest issues I have seen with things are often with the init.d scripts OR with using conflicting software (2 different CPU controllers for example).
If you are having FC's, I'd post a logcat in the forum thread along with any relevant data. If it just seems buggy, post the bugs in the forum thread along with steps to reproduce it. If it is a kitkat rom you are running, are you using DALVIK or ART? I know ART is still in testing and does not play nice with some things like xposed framework.