so i have s-off using revolutionary. also i had clockwork installed but now i seen to have a coredroid touch recovery lol. confused on how i did that. also, have done the su flash. BUT i didnt do the super cid flash. is that where im hanging up?
the roms install and i get to the splash screen for the rom but the phone then just reboots.
any feedback would be great!
thanks men!
Anyone?
Sent from my LG-P999 using XDA App
what firmware do you have(check in bootloader for hboot version) and what roms are you trying to flash?
Upgrade your firmware if flashing an ICS ROM, link here darkforest.violishious.com/Firmware
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
Snake_skw said:
what firmware do you have(check in bootloader for hboot version) and what roms are you trying to flash?
Click to expand...
Click to collapse
i was 1.18.0000 however now after visionary im 1.17.1111
also i tried coredroid and virtuous
Jonny said:
Upgrade your firmware if flashing an ICS ROM, link here darkforest.violishious.com/Firmware
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
Click to expand...
Click to collapse
ok ill do that. now try and do the rom?
flashed my firmware, did a complete wipe, installed rom. got to the roms splashpage and it reboots...
I would recommend changing to super CID then reflash firmware > wipe > Flash rom. That way this can be completely ruled out.
It sounds like your firmware and rom don't agree with each other. I don't know anything about coredroid
kdm212 said:
so i have s-off using revolutionary. also i had clockwork installed but now i seen to have a coredroid touch recovery lol. confused on how i did that. also, have done the su flash. BUT i didnt do the super cid flash. is that where im hanging up?
the roms install and i get to the splash screen for the rom but the phone then just reboots.
any feedback would be great!
thanks men!
Click to expand...
Click to collapse
kdm212 said:
flashed my firmware, did a complete wipe, installed rom. got to the roms splashpage and it reboots...
Click to expand...
Click to collapse
if u use cmw
the change to 4ext recovery have heart about that problem before
u can also try this from mike´s thread https://www.rapidshare.com/files/1225017304/PG58IMG.zip
i have edit it so it will install 4ext recovery also
remember to delete pg58img from ur sdcard after u have flashed it
janielsen said:
if u use cmw
the change to 4ext recovery have heart about that problem before
u can also try this from mike´s thread https://www.rapidshare.com/files/1225017304/PG58IMG.zip
i have edit it so it will install 4ext recovery also
remember to delete pg58img from ur sdcard after u have flashed it
Click to expand...
Click to collapse
follow the following thread.
http://forum.xda-developers.com/showthread.php?t=1480061
musarraf172 said:
follow the following thread.
http://forum.xda-developers.com/showthread.php?t=1480061
Click to expand...
Click to collapse
"I really want to use the latest ICS! How do I go about doing this?
I get this PM'd to me a lot. The best way I have seen to do it is as shown (Thanks to PaulGiz)
1. Do some reading as this is a bit different and harder than a normal ROM flash.
2. Best way is to place Firmware PG58IMG.zip, ROM and Superwipe script on the root of your SD Card.
3. Shut down phone and remove SD card.
4. Boot phone to Bootloader (Power+Vol down).
5. Move selection to Recovery, but don't select yet.
6. Insert SD, then select Recovery.
7. Flash Superwipe (ARHD Superwipe will reboot when done, others may not. Make sure it is a superwipe for the sensation!) & then Flash ROM.
8. Power down, then boot to Bootloader. Select Fastboot. Say yes to upgrade.
9. Watch the flash. It will flash 3 or 4 things, then reboot to bootloader. Don't panic when screen goes dark. Bootloader will come back and it will finish flashing.
10. Now select reboot.
11. Wait (up to 10 minutes) for ROM to boot up.
12. Set up your phone and enjoy ICS!!!
followed this to the T and still i get to a rom spashscreen and a few seconds later im bootlooped.
also now when i boot into fastboot my phone says its locked and model ID is incorrect. HBoot 1.27.0000
Pyramid PVT Ship S-off RL
Did i flash the wrong img?
perhaps i should just stick to my g2x lol
is there a way for me to go back to gingerbread? ill wait on ics...
kdm212 said:
"I really want to use the latest ICS! How do I go about doing this?
I get this PM'd to me a lot. The best way I have seen to do it is as shown (Thanks to PaulGiz)
1. Do some reading as this is a bit different and harder than a normal ROM flash.
2. Best way is to place Firmware PG58IMG.zip, ROM and Superwipe script on the root of your SD Card.
3. Shut down phone and remove SD card.
4. Boot phone to Bootloader (Power+Vol down).
5. Move selection to Recovery, but don't select yet.
6. Insert SD, then select Recovery.
7. Flash Superwipe (ARHD Superwipe will reboot when done, others may not. Make sure it is a superwipe for the sensation!) & then Flash ROM.
8. Power down, then boot to Bootloader. Select Fastboot. Say yes to upgrade.
9. Watch the flash. It will flash 3 or 4 things, then reboot to bootloader. Don't panic when screen goes dark. Bootloader will come back and it will finish flashing.
10. Now select reboot.
11. Wait (up to 10 minutes) for ROM to boot up.
12. Set up your phone and enjoy ICS!!!
followed this to the T and still i get to a rom spashscreen and a few seconds later im bootlooped.
also now when i boot into fastboot my phone says its locked and model ID is incorrect. HBoot 1.27.0000
Pyramid PVT Ship S-off RL
Did i flash the wrong img?
perhaps i should just stick to my g2x lol
Click to expand...
Click to collapse
I am a bit confused. You said your hboot 1.27 and your phone says locked ?????
Double check it . If your HBOOT is 1.27 your phone should say
"Unlocked Revolutionary
Pyramid PVT Ship S-off RL
HBOOT 1.27.0000"
If it is showing HBOOT 1.27 andlocked then firmware flashing is incomplete. Did you download the correct file for your CID? What is your CID? which file did you download? Did you check the md5 checksum of the file after download? Was it same ? Redo the firware flashing.
---------- Post added at 06:16 AM ---------- Previous post was at 06:12 AM ----------
kdm212 said:
is there a way for me to go back to gingerbread? ill wait on ics...
Click to expand...
Click to collapse
Sure you can install GB based ROM. It was discussed in section 9 of the first post. of my guide .
Before installaing an GB based ROM , you have to downgrade the firmware.
Download the v1.17 firmware from this page.
Download the firmware as per your CID. If you are superCID then you can use any v1.17 firmware.
Check the md5 checksum of the downloaded file. It must match else redownload it.
1. place Firmware PG58IMG.zip on the root of your SD Card.
2. Shut down phone.
3. Remove the battery.
4. Wait a minute.
5. Put the battery again in phone.
6. Boot phone to Bootloader by pressing (Power+Vol down). keys together.
7. Say yes to upgrade.
8. Watch the flash. It will flash 3 or 4 things, then reboot to bootloader. Don't panic when screen goes dark. Bootloader will come back and it will finish flashing.
Now your phone should show:
Eng Unlocked
pyramid pvt ship s-off rl
hboot-1.17.0000
radio-11.15.3504.16_m
eMMC-boot
( The radio version might show different ; don't worry )
9. Now download your rom.zip ( I suggest to use ARHD or RCMIX GB edition )
10. Put it on your sdcard root.
11. boot into recovery.
12. Wipe data, boot, system , cache and dalvik cache ( i.e superwipe)
13. Install your ROM.
14. Reboot
15. Have patience . First boot may take 7 to 8 minutes.
16. Enjoy.
If your rom suggests a specific radio, then download it.
Boot into bootloader (usb fastboot)
use fastboot to flash the radio as follows.
" fastboot flash radio radio.img"
Then reboot by "fastboot reboot"
Related
Help! Installation ClockWorkMod writes fail-pu ... PG58IMG.zip any file does not install. Knowledgeable people tell me what's the problem?
FausFear said:
Help! Installation ClockWorkMod writes fail-pu ... PG58IMG.zip any file does not install. Knowledgeable people tell me what's the problem?
Click to expand...
Click to collapse
flash through HBOOT, not recovery
Jonny said:
flash through HBOOT, not recovery
Click to expand...
Click to collapse
how to do it? I am not strong in this (((if you can for more info ...
1st got to settings>power and uncheck fastboot. then power phone completely off.
Next hold vol-down and power until white htc appears.
It will go to bootloader and automatically see the PD58IMG.zip
Oomike said:
1st got to settings>power and uncheck fastboot. then power phone completely off.
Next hold vol-down and power until white htc appears.
It will go to bootloader and automatically see the PD58IMG.zip
Click to expand...
Click to collapse
I ROM is not installed, when you switch displays in FASTBOOT! PD58IMG.zip can not install says in red letters Fail-PU ...
in my opinion I have with HBOOT 1.20.0000 problems. because I started to install automatic ROM ICS 4.0 with the file PD58IMG.zip, there is not the end everything was installed, some written as FAIL-PU.
I've read that if you try to flash the firmware update for hboot 1.20 if you don't have supercid some files may fail to update
Sent from my Kindle Fire using Tapatalk
ar4l said:
I've read that if you try to flash the firmware update for hboot 1.20 if you don't have supercid some files may fail to update
Sent from my Kindle Fire using Tapatalk
Click to expand...
Click to collapse
tell me how to update? I'm from Russia, it is very difficult to translate and communicate. I ask how you can in a simplified form.
Give us some background info. Was your phone rooted in the first place? Did you follow the path s-off then clockwokmod recovery then root then supercid? What did you do before this happened? Did you try to install the latest RUU 3.06 where hboot 1.20 comes? We are happy to help but it's not easy trying to solve something without some info
Sent from my Kindle Fire using Tapatalk
phone s-off, root, super cid, it all started after trying to flash (Sensation ICS 3.06.401.1 - Rooted PG58IMG.ZIP) all the checkboxes have been installed in the firmware partition except system and even some I do not remember. After re-flashing, all the ticks became Fail-PU.
FausFear said:
phone s-off, root, super cid, it all started after trying to flash (Sensation ICS 3.06.401.1 - Rooted PG58IMG.ZIP) all the checkboxes have been installed in the firmware partition except system and even some I do not remember. After re-flashing, all the ticks became Fail-PU.
Click to expand...
Click to collapse
so, first, did you check the md5 checksum to see if your download wasn't corrupted? Some times I use winmd5sum portable because I don't need to install it in my computer. http://download.cnet.com/WinMd5Sum-Portable/3000-2381_4-75099291.html
You noticed that you are flashing a rom for the sensation not the sensation xe (this one is the 401.101) some differences are discussed here but is an advanced topic.
if everything is ok this is how you install a pg58img.zip using the bootloader
place pg58img.zip in sd card
turn off phone if you are not sure the phone is really off take battery out and put it back
press and keep holding VOL DOWN
press and keep holding POWER until you enter the bootloader
pg58img is automatically detected and you are asked if you want to update
after installation of all packages is finished reboot your phone
I was checking the pg58img and seems to be the RUU: the firmware update plus the rooted stock rom and the custom recovery.
although s-off and supercid are persistent and not modified with this firmware update your hboot 1.2000 is now locked and you may not be able to use fastboot commands or install some packages like radios (maybe that's happening to you when it says fail-pu)
to regain unlocked hboot you can use the tools at htcdev to unlock hboot 1.20 or you can download the hboot 1.17 onlocked from here
before you do that don't forget to delete the pg58 img that you hace in your sd card and then place this one in its place.
cheers
this is all I've done (Fail-PU) (((((
FausFear said:
phone s-off, root, super cid, it all started after trying to flash (Sensation ICS 3.06.401.1 - Rooted PG58IMG.ZIP) all the checkboxes have been installed in the firmware partition except system and even some I do not remember. After re-flashing, all the ticks became Fail-PU.
Click to expand...
Click to collapse
so, first, did you check the md5 checksum to see if your download wasn't corrupted? Some times I use winmd5sum portable because I don't need to install it in my computer. http://download.cnet.com/WinMd5Sum-Portable/3000-2381_4-75099291.html
You noticed that you are flashing a rom for the sensation not the sensation xe (this one is the 401.101) some differences are discussed here but is an advanced topic.
if everything is ok this is how you install a pg58img.zip using the bootloader
place pg58img.zip in sd card
turn off phone if you are not sure the phone is really off take battery out and put it back
press and keep holding VOL DOWN
press and keep holding POWER until you enter the bootloader
pg58img is automatically detected and you are asked if you want to update
after installation of all packages is finished reboot your phone
I was checking the pg58img and seems to be the RUU: the firmware update plus the rooted stock rom and the custom recovery.
although s-off and supercid are persistent and not modified with this firmware update your hboot 1.2000 is now locked and you may not be able to use fastboot commands or install some packages like radios (maybe that's happening to you when it says fail-pu)
to regain unlocked hboot you can use the tools at htcdev to unlock hboot 1.20 or you can download the hboot 1.17 onlocked from here
before you do that don't forget to delete the pg58 img that you hace in your sd card and then place this one in its place.
cheers
ar4l said:
so, first, did you check the md5 checksum to see if your download wasn't corrupted? Some times I use winmd5sum portable because I don't need to install it in my computer. http://download.cnet.com/WinMd5Sum-Portable/3000-2381_4-75099291.html
You noticed that you are flashing a rom for the sensation not the sensation xe (this one is the 401.101) some differences are discussed here but is an advanced topic.
if everything is ok this is how you install a pg58img.zip using the bootloader
place pg58img.zip in sd card
turn off phone if you are not sure the phone is really off take battery out and put it back
press and keep holding VOL DOWN
press and keep holding POWER until you enter the bootloader
pg58img is automatically detected and you are asked if you want to update
after installation of all packages is finished reboot your phone
I was checking the pg58img and seems to be the RUU: the firmware update plus the rooted stock rom and the custom recovery.
although s-off and supercid are persistent and not modified with this firmware update your hboot 1.2000 is now locked and you may not be able to use fastboot commands or install some packages like radios (maybe that's happening to you when it says fail-pu)
to regain unlocked hboot you can use the tools at htcdev to unlock hboot 1.20 or you can download the hboot 1.17 onlocked from here
before you do that don't forget to delete the pg58 img that you hace in your sd card and then place this one in its place.
cheers
Click to expand...
Click to collapse
this is all I've done (Fail-PU) (((((
FausFear said:
this is all I've done (Fail-PU) (((((
Click to expand...
Click to collapse
it failed when trying to flash the recovery which is custom and no stock. try flashing the firmware update only without recovery or rom. you can find it here, that's what i did first flashed the firmware only and after that a rom (android revolution 5.0.2 currently)
anyway, I was talking to some other guys and if noting works you can download a shipped RUU (there's a collection here). Run the exe file and you'll finish with a stock gingerbread system. You'll have to root and install custom recovery and the usual again. If after that you still feel like trying ICS install the firmware update only, not the one you tried.
cheers
Yet another example of someone jumping blind into something they don't understand. If you don't know how to reverse the rooting process you should not even consider rooting in the first place.
There should be some sort of test before rooting information is given out - would stop n00bs getting themselves up **** creek
FausFear said:
this is all I've done (Fail-PU) (((((
Click to expand...
Click to collapse
Are you super cid, if not do so now a d flash custom firmware. Super cid us a low level fastbiit command and can be done on hboot 1.20
Sent from my HTC Sensation Z710e using xda premium
d3vilskid said:
Are you super cid, if not do so now a d flash custom firmware. Super cid us a low level fastbiit command and can be done on hboot 1.20
Sent from my HTC Sensation Z710e using xda premium
Click to expand...
Click to collapse
how to make low level fastbiit command?
FausFear said:
how to make low level fastbiit command?
Click to expand...
Click to collapse
Oh dear.......
He is saying SuperCID IS a low level fastboot command, you cannot make one
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
http://www.youtube.com/watch?feature=player_detailpage&list=HL1325964886&v=TaMhxD_aowA
here's a video look
ok i got litle bit from all over no clue who posted it dont care just telling you how i fix my phone
i tried to get 3.24-3.32 firmware on it and wouldnt go ketp boot looping
or any problems your having installing O.T.A update
i was asked why host files on 3rd party cuz i got sick of none working ones i know the ones i got posted work
Firstly - you HAVE to be running 1.50.401.1 to use this OTA file. and 1.17 firmware If you're on ANY other build it wont work
firmware can be found here for 1.17
http://forum.xda-developers.com/showthread.php?t=1459767
You also have to be 100% stock (e.g. NOT rooted). If you are running a custom ROM you HAVE to use the http://www.4shared.com/file/risaQet4/RUU_Pyramid_HTC_Europe_1454012.htm RUU to get back to stock but you HAVE to leave the phone S-OFF. THIS RUU IS NOT FOR XE
Xe is here if you can get link to work i am not hosting this file http://www.filefactory.com/file/c0a...00U_10.15.9035.02_2_release_214840_signed.exe
I made my CID HTC__001 but some are better with 11111111http://forum.xda-developers.com/showthread.php?t=1192300 "step 4" i used HTC__001
1. You're now running stock gb 2.3.3 with Sense 3.0
2. download the 3.32.401.5 OTA file from HTC http://www.4shared.com/zip/SKaYUBFP/OTA_Euro_3324015.html . You do NOT have to rename the file
3. Put let this.download
4. turn phone on load it all the way UPDATE IT WITH O.T.A 2X FIRST IS NOTHING SECOND IS 1.50 AND WILL LET YOU UPDATE TO 3.32
5. find file from step from 2
6. Copy the file to the root of your SD card
7. Turn your phone off and turn it back on whilst holding the volume down button.
8. Select 'Recovery' from the menu to enter the stock Recovery. If CWM loads up, stop now and flash the RUU again
9. When you get to the screen with the red ! on it, hold volume up and press power. It will say 'cant open cache/recovery/command' and then bring up the recovery menu
Select the option to apply an update from your SD card and then select the OTA file
7. Wait the 10 minutes or so for it to flash
8. When prompted, reboot the phone
above was edited form poster as to what i did
12. onec you flash the 3.32.401.5 OTA file from sd card
boot 100% you will have 2.32 at this point but not done
flash http://forum.xda-developers.com/showthread.php?t=1459767
second list for HTC__001
13.download CWM recovery http://www.4shared.com/zip/QJPydsPo/PG58IMG-recovery.html remover recovery from name then paste to sd root and flash img
or 4EXT Recovery Touch v1.0.0.4 RC 1 if you can find img
14. now you can got back to http://forum.xda-developers.com/showthread.php?t=1192300[/url] "step 4"and super CID if you like for keep what you got
your done !!!!!!!!!!!! time to flash again
"this rom will not have superuser and/or be rooted pick from below to gain root or find a rom
you can now flash
"Revolution HD™ 6.5.1" by mike1986
"[xXKingsRomXx]***Endo-Sense 4.0
"☆ b l a c k I C E _ 5 . 0 . 1 ☆ \__/ _ [ICS 4.0.3][Sense 4.0]
"Virtuous with Sense 4.0
and what may come next
again this is what i did and may help you guys looking to get to 3.32 that gets boot loops
after new rom installed if it hangs reformat sd card thanks to xXkingsromXx for last little push to get me in with 4.0
on a side note i want to say to anyone having trouble there are some here willing to help and some sending people to google i was sent to google and thought i post the work around i did
You are amazing, thanks!
Ill try it as fast as i can.
Thank you, this cured my boot loop.
I just posted this over on the ARHD thread. Do you think that this maybe my case? Any advise would be greatly appreciated.
About a week ago I SuperCID my phone. I then went to load a ICS ROM. I have not been able to get my phone to do anything but startup into HBOOT and/or Recovery. I either was getting stuck in a boot loop or would get the "HTC Quietly Brilliant" screen. I spent the whole weekend on the forums and still no luck. I was hoping someone could see something that I maybe doing wrong. The one issue that I know is wrong is the Radio version needed for ARHD is 11.69.3504.00U_11.22.3504.07_M. I tried to use a program called Android Flasher to load the correct radio but I don't think that that occurred. Below is all the information that I can gather.
TMOUSA Sensation 4G
On HBOOT Screen:
Revolutionary
Pyramid PVT SHIP S-Off RL
HBOOT - 1.27.1100
Radio - 11.22.3504.07_M
OpenADSP - V02.6.0.2226.00.0131
eMMC - Boot
Jan 13, 2012 17:33:34
Other specifics:
ARHD 6.51.1.zip ROM
ARHD SuperWipe.zip
4EXT v1.0.0.4 RC1 installed and working properly
PG58IMG is 3.32 for TMOUSA
CID and MID
CID 11111111
MID PG5810000
Any help would be greatly appreciated. If needed, I can upload a copy of the logcat while the phone boots up. Thanks in advance.
best best flash firmware 1,17 and then restart
then runn the ruu file
turn phone on fastboot make sure no img files in sd card ruu will see phone and bring you to step 1 in my post
fastboot is 1 step past were firmware installs make sure you have no img on sd card
its the firmware some of our phone just dont want to take it from 2.24-3.32 not sure why if your not getting in rom you can try backing up sd card formate it putting rom on it only rewipe and flash with nothing on it "king said dirty sd card" and try if not follow my steps
I will definitely try this tomorrow. Your instructions will work with TMOUSA correct?
carrier dont matter when you play with cid
but yeah tmob will work
ecardwell1 said:
I will definitely try this tomorrow. Your instructions will work with TMOUSA correct?
Click to expand...
Click to collapse
side not if you go to 3.12 and then you can flash the rom you had in before you started to play with update
craven667 said:
ok i got litle bit from all over no clue who posted it dont care just telling you how i fix my phone
i tried to get 3.24-3.32 firmware on it and wouldnt go ketp boot looping
or any problems your having installing O.T.A update
i was asked why host files on 3rd party cuz i got sick of none working ones i know the ones i got posted work
Firstly - you HAVE to be running 1.50.401.1 to use this OTA file. and 1.17 firmware If you're on ANY other build it wont work
firmware can be found here for 1.17
http://forum.xda-developers.com/showthread.php?t=1459767
You also have to be 100% stock (e.g. NOT rooted). If you are running a custom ROM you HAVE to use the http://www.4shared.com/file/risaQet4/RUU_Pyramid_HTC_Europe_1454012.htm RUU to get back to stock but you HAVE to leave the phone S-OFF.
I made my CID HTC__001 http://forum.xda-developers.com/showthread.php?t=1192300 "step 4" i used HTC__001
1. You're now running stock gb 2.3.3 with Sense 3.0
2. download the 3.32.401.5 OTA file from HTC http://www.4shared.com/zip/SKaYUBFP/OTA_Euro_3324015.html . You do NOT have to rename the file
3. Select the option to apply an update from your SD card and then select the OTA file
4. turn phone on load it all the way UPDATE IT WITH O.T.A 2X FIRST IS NOTHING SECOND IS 1.50 AND WILL LET YOU UPDATE TO 3.32
5. find file from step from 2
6. Copy the file to the root of your SD card
7. Turn your phone off and turn it back on whilst holding the volume down button.
8. Select 'Recovery' from the menu to enter the stock Recovery. If CWM loads up, stop now and flash the RUU again
9. When you get to the screen with the red ! on it, hold volume up and press power. It will say 'cant open cache/recovery/command' and then bring up the recovery menu
7. Wait the 10 minutes or so for it to flash
8. When prompted, reboot the phone
above was edited form poster as to what i did
12. onec you flash the 3.32.401.5 OTA file from sd card
boot 100% you will have 2.32 at this point but not done
flash http://forum.xda-developers.com/showthread.php?t=1459767
second list for HTC__001
13.download CWM recovery http://www.4shared.com/zip/QJPydsPo/PG58IMG-recovery.html remover recovery from name then paste to sd root and flash img
or 4EXT Recovery Touch v1.0.0.4 RC 1 if you can find img
14. now you can got back to http://forum.xda-developers.com/showthread.php?t=1192300[/url] "step 4"and super CID if you like for keep what you got
your done !!!!!!!!!!!! time to flash again
"this rom will not have superuser and/or be rooted pick from below to gain root or find a rom
you can now flash
"Revolution HD™ 6.5.1" by mike1986
"[xXKingsRomXx]***Endo-Sense 4.0
"☆ b l a c k I C E _ 5 . 0 . 1 ☆ \__/ _ [ICS 4.0.3][Sense 4.0]
"Virtuous with Sense 4.0
and what may come next
again this is what i did and may help you guys looking to get to 3.32 that gets boot loops
after new rom installed if it hangs reformat sd card thanks to xXkingsromXx for last little push to get me in with 4.0
Click to expand...
Click to collapse
Sorry dear. I could not get in touch with my pc. Nice that you have solved it. Thanks for sharing..
craven667 said:
Firstly - you HAVE to be running 1.50.401.1 to use this OTA file. and 1.17 firmware If you're on ANY other build it wont work
firmware can be found here for 1.17
http://forum.xda-developers.com/showthread.php?t=1459767
Click to expand...
Click to collapse
OK dumb question. Will the 1.17 FW load the 1.50.401.1 with it or do I have to get that from somewhere?
craven667 said:
You also have to be 100% stock (e.g. NOT rooted). If you are running a custom ROM you HAVE to use the http://www.4shared.com/file/risaQet4/RUU_Pyramid_HTC_Europe_1454012.htm RUU to get back to stock but you HAVE to leave the phone S-OFF.
Click to expand...
Click to collapse
I know with the RUU that the phone has to be up and running. Is there a way to run the RUU if the phone can only be loaded into HBOOT or recovery?
Yeah ruu will run in fastboot make sure you have no IMG files
Sent from my HTC Sensation 4G using xda premium
ecardwell1 said:
OK dumb question. Will the 1.17 FW load the 1.50.401.1 with it or do I have to get that from somewhere?
Click to expand...
Click to collapse
Ok 1.17 is firmware to run ruu will bring you to 1.45 and then settings about phone ota 2x for 1.50 then your good
Sent from my HTC Sensation 4G using xda premium
easy breezy
Here's where I'm at now. I cannot update to 1.50 because HTC complains of a "Variant System Version" when I try to do the 1.50 OTA. I simply cannot figure out any way around this. My recovery is stock, CID is HTC__001 as you mentioned, and I can't move forward because I can't get this 1.50 installed.
thracky said:
Here's where I'm at now. I cannot update to 1.50 because HTC complains of a "Variant System Version" when I try to do the 1.50 OTA. I simply cannot figure out any way around this. My recovery is stock, CID is HTC__001 as you mentioned, and I can't move forward because I can't get this 1.50 installed.
Click to expand...
Click to collapse
did you run the ruu and go to stock and format sdcard once there let phone boot up 100% then settings about phone look check for updates restart then do it again to be 1.50 ??
ok need more info to what you done so far your in Canada do you have xe ???
craven667 said:
did you run the ruu and go to stock and format sdcard once there let phone boot up 100% then settings about phone look check for updates restart then do it again to be 1.50 ??
ok need more info to what you done so far your in Canada do you have xe ???
Click to expand...
Click to collapse
Ran the RUU, let the phone boot up, checked for updates, update fails with the error I mentioned above.
I do not have the XE, just the regular Virgin Sensation. I had Virtuous 3.0.0 on there before but was trying to upgrade to 4.0.0 and got the boot loop after upgrading the firmware.
Would it not be easier just to RUU straight to 1.50?
So I decided to run an old'ish ICS Pyramid RUU I had lying around that I *knew* worked previously, RUU_PYRAMID_LE_ICS_35_S_HTC_Europe_3.06.401.101_Radio_11.59.3504.00U_11.16.3504.16_M_test_231336.
Then I flashed recovery, latest 3.32 firmware, did superwipe & virtuous 4.0.0. Everything works perfect!
Well if you don't have a xe the ruu should not have worked hmmmm yeah you can run Thu to 150 but all the ones I downloaded didn't work with bootloops
Sent from my HTC Sensation 4G using xda premium
I have been at this for 5 hours straight and I just can't find a SOLUTION...I've READ A LOT before posting this question...and still I can't find anything to help me. So can someone PLEASE HELP if you can. I will be as detailed as i can. I will start off with my phone specs and so forth: By the way i am on GB 2.3.4..
LOCKED
Pyramid PVT SHIP S-OFF RL
HBOOT- 1.27.000
Radio- 11.22.3504.07_M
OpenADSP-v02.6.0.2226.00.0131
emmc- boot
Okay, i wanted to download the ELEGANCIA ICS ROM but before i could i had to download a FIRMWARE PACKAGE(or just firmware). So i downloaded the Firmware from 3.32 RUU which is for the ELEGANCIA ROM...By the way, I DID THIS BEFORE I INSTALLED the ELEGANCIA ROM(i hadn't downloaded it yet..elegancia rom) I followed the instructions how to flash it. It said it would tell you what to do next..so i did it. Went into Recovery and flashed through sd and installed the ZIP file and when it asked if i wanted to udate it i pressed Yes...and then this is what HAPPENs NEXT.
It ask if i want to update and I do and then it says:
Parsing...[ SD ZIP]
[1] BOOTLOADER - Ok
Update Complete...
Press POWER to reboot.
So i press power and all it does is: BOOTS up and then TURNS OFF
It continues to do that...I believe it's called BOOT LOOPING.?
I pull out the battery and press VOL. Down plus POWER at the same tiime and it takes me back to the WHITE SCREEN and I see FASTBOOT, RECOVERY, FACTORY RESET, SIMLOCK and IMAGE CRC but does NOT let me choose. It automatically goes to HBOOT.
I have to pull battery or it will continue to BOOT itself on and off again. Even with the phone off, I connect it to my usb connection on my laptop and my device does not show on my laptop. Both the usb connection and usb cord are working properly.
That is my BIG PAIN in MY ASS right now!!
Can someone please help me.?
You will have to make your phone Super-CID or download the correct firmware package that fit your CID.
Super-CID makes you able to flash any firmware package etc.
Guide for Super-CID: http://forum.xda-developers.com/showthread.php?t=1192300
Sigg1996 said:
You will have to make your phone Super-CID or download the correct firmware package that fit your CID.
Super-CID makes you able to flash any firmware package etc.
Guide for Super-CID: http://forum.xda-developers.com/showthread.php?t=1192300
Click to expand...
Click to collapse
THANK YOU for the response but how do I do that if i can"t power my phone on since it just re boots?
I am on T Mobile USA. How do I know which Firmware Package to choose?
Find my post I will bump it in general
Sent from my HTC Sensation using xda premium
thekoopers said:
THANK YOU for the response but how do I do that if i can"t power my phone on since it just re boots?
I am on T Mobile USA. How do I know which Firmware Package to choose?
Click to expand...
Click to collapse
i think you have to retore your phone to stock if you cant log to hboot :/
if you can load to hboot then find the cid ( or just supercid -check my sig) then flash the correct firmware file
Sent from my HTC Sensation 4G using XDA App
namila007 said:
i think you have to retore your phone to stock if you cant log to hboot :/
if you can load to hboot then find the cid ( or just supercid -check my sig) then flash the correct firmware file
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
You stated that your ROM was GB and that's not supported on the 3.32 F/W.
Download your ICS ROM and mike's SuperWipe script from the ARHD thread.
Copy them to the SDcard via the PC and a USB <-> microSD adapter.
Delete the PG58IMG.zip file on the SDcard.
Boot the phone into Bootloader, get into Recovery, SuperWipe and flash the ROM.
You also have a locked version (1.27.0000) of the HBOOT, I suggest at some stage installing an unlocked version (1.27.1100) from: http://forum.xda-developers.com/showthread.php?t=1459767
namila007 said:
i think you have to retore your phone to stock if you cant log to hboot :/
if you can load to hboot then find the cid ( or just supercid -check my sig) then flash the correct firmware file
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
How do i restore to stock? I have already read the supercid but it does say phone has to be turned on and everytime i turn phone on it just turns off again then on..etc...
namila007 said:
i think you have to retore your phone to stock if you cant log to hboot :/
if you can load to hboot then find the cid ( or just supercid -check my sig) then flash the correct firmware file
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
craven667 said:
Find my post I will bump it in general
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
I just found your post and i will try and follow your instructions to the tee...if I have a problem with anything I will ask you on your post.
Thanks, craven667
thekoopers said:
How do i restore to stock? I have already read the supercid but it does say phone has to be turned on and everytime i turn phone on it just turns off again then on..etc...
Click to expand...
Click to collapse
Don't bother restoring to stock, waste of effort.
Read my previous post.
1. Anyway, did the ICS F/W update work ?
2. Is the PG58IMG.zip file still on the SDcard ? If so rename /delete it.
3. Get your chosen ICS ROM and mike's SuperWipe script onto the SDcard.
4. Go into recovery and run the Superwipe script then flash the ROM.
Steps 2 & 3 you'll need to use a PC to do these with a USB <-> microSD adapter.
I am assuming that there wasn't a typo in your original post in that you actually have HBOOT 1.27.0000, this is ICS ONLY firmware and GB won't work on it.
BTW what recovery have you got ? CWM or 4EXT ?
gol_n_dal said:
You stated that your ROM was GB and that's not supported on the 3.32 F/W.
Download your ICS ROM and mike's SuperWipe script from the ARHD thread.
Copy them to the SDcard via the PC and a USB <-> microSD adapter.
Delete the PG58IMG.zip file on the SDcard.
Boot the phone into Bootloader, get into Recovery, SuperWipe and flash the ROM.
You also have a locked version (1.27.0000) of the HBOOT, I suggest at some stage installing an unlocked version (1.27.1100) from: http://forum.xda-developers.com/showthread.php?t=1459767
Click to expand...
Click to collapse
I will try what you said to do.
Thanks, gol_sol.
Very much appreciated.
gol_n_dal said:
Don't bother restoring to stock, waste of effort.
Read my previous post.
1. Anyway, did the ICS F/W update work ?
2. Is the PG58IMG.zip file still on the SDcard ? If so rename /delete it.
3. Get your chosen ICS ROM and mike's SuperWipe script onto the SDcard.
4. Go into recovery and run the Superwipe script then flash the ROM.
Steps 2 & 3 you'll need to use a PC to do these with a USB <-> microSD adapter.
I am assuming that there wasn't a typo in your original post in that you actually have HBOOT 1.27.0000, this is ICS ONLY firmware and GB won't work on it.
BTW what recovery have you got ? CWM or 4EXT ?
Click to expand...
Click to collapse
+1 10 char. I also do not suggest to flash an RUU.
gol_n_dal said:
You stated that your ROM was GB and that's not supported on the 3.32 F/W.
Download your ICS ROM and mike's SuperWipe script from the ARHD thread.
Copy them to the SDcard via the PC and a USB <-> microSD adapter.
Delete the PG58IMG.zip file on the SDcard.
Boot the phone into Bootloader, get into Recovery, SuperWipe and flash the ROM.
You also have a locked version (1.27.0000) of the HBOOT, I suggest at some stage installing an unlocked version (1.27.1100) from: http://forum.xda-developers.com/showthread.php?t=1459767
Click to expand...
Click to collapse
gol_n_dal said:
Don't bother restoring to stock, waste of effort.
Read my previous post.
1. Anyway, did the ICS F/W update work ?
2. Is the PG58IMG.zip file still on the SDcard ? If so rename /delete it.
3. Get your chosen ICS ROM and mike's SuperWipe script onto the SDcard.
4. Go into recovery and run the Superwipe script then flash the ROM.
Steps 2 & 3 you'll need to use a PC to do these with a USB <-> microSD adapter.
I am assuming that there wasn't a typo in your original post in that you actually have HBOOT 1.27.0000, this is ICS ONLY firmware and GB won't work on it.
BTW what recovery have you got ? CWM or 4EXT ?
Click to expand...
Click to collapse
I just tried it and the phone is ON NOW BUT it is just on the White screen with the Green HTC letters. It has been on for 15 minutes already...By the way, I DO NOT have a microSD adapter. I did it by getting into CWM and going to Recovery and going into mounts and then i mounted it and was able to install it like that. Is that the reason why it is still on the White HTC screen? Do I pull the Battery?
Another thing I still haven't flashed my ICS Rom because when i DID Mike's SuperWipe it did it's thing and just automattically went to the White HTC screen.
No, there is NO TYPO, that is exactly what it says. I believe i still have CWM and I remember tthat I had 4ext to.
thekoopers said:
I just tried it and the phone is ON NOW BUT it is just on the White screen with the Green HTC letters. It has been on for 15 minutes already...By the way, I DO NOT have a microSD adapter. I did it by getting into CWM and going to Recovery and going into mounts and then i mounted it and was able to install it like that. Is that the reason why it is still on the White HTC screen? Do I pull the Battery?
Another thing I still haven't flashed my ICS Rom because when i DID Mike's SuperWipe it did it's thing and just automattically went to the White HTC screen.
No, there is NO TYPO, that is exactly what it says. I believe i still have CWM and I remember tthat I had 4ext to.
Click to expand...
Click to collapse
So precisely what have you got on the SDcard at the moment ?
PG58IMG.zip ?
SuperWipe.zip (or what ever the name is) ?
ICS ROM "zip" file ?
Edit: If you used the superwipe script you have no OS on the phone and will NEED to flash an ICS ROM through recovery. It shouldn't have gone to the white HTC screen just returned to CWM. If you don't have an ICS ROM on the phone's SDcard you can try adb pushing it or possibly use another device that has microUSB capability.
gol_n_dal said:
So precisely what have you got on the SDcard at the moment ?
PG58IMG.zip ?
SuperWipe.zip (or what ever the name is) ?
ICS ROM "zip" file ?
Edit: If you used the superwipe script you have no OS on the phone and will NEED to flash an ICS ROM through recovery. It shouldn't have gone to the white HTC screen just returned to CWM. If you don't have an ICS ROM on the phone's SDcard you can try adb pushing it or possibly use another device that has microUSB capability.
Click to expand...
Click to collapse
What I have now is Superwipe.zip and ICS ROM.zip. I deleted the PG58IMG that I had on the SD Card before I did the SUPERWIPE.
I pulled out the battery and got into recovery and installed from sdcard and I went to install ICS ROM and it started but then it said ABORTED. Tried again and said the same thing.
Should I try another ICS ROM?
What about not having the PG58IMG?
thekoopers said:
What I have now is Superwipe.zip and ICS ROM.zip. I deleted the PG58IMG that I had on the SD Card before I did the SUPERWIPE.
I pulled out the battery and got into recovery and installed from sdcard and I went to install ICS ROM and it started but then it said ABORTED. Tried again and said the same thing.
Should I try another ICS ROM?
What about not having the PG58IMG?
Click to expand...
Click to collapse
It seems that your ics ROM is corrupted. Did you check the md5sum of the ROM zip file?
Sent from my Sensation using Tapatalk
musarraf172 said:
It seems that your ics ROM is corrupted. Did you check the md5sum of the ROM zip file?
Sent from my Sensation using Tapatalk
Click to expand...
Click to collapse
I did not check that but I will Re-Flash and see if it works.
Thanks musarraf172
thekoopers said:
I did not check that but I will Re-Flash and see if it works.
Thanks musarraf172
Click to expand...
Click to collapse
In stead of writing "Thanks" please hit the thanks button...
First post. Hi all. I have rooted phones for years now and am finally at a loss of what to do with this current phone I have. I have a HTC sensation. I just S-offed it and was trying to install clolckwork mod 5.0.0.8 and it says model id incorrect and I am stuck in a boot loop. I must have downloaded 15 different PG58IMG files and they all say the same thing..... model id incorrect. I just got this phone in the mail. Revolutionary S-offed it. Then when it asked "Revolutionary will now ask you to Install clockwork recovery mod after S OFF. Type N and install it manually" from the [Guide] to Installing S-off, Unlocking, ClockWork, Root, SuperCID & S-on. Now I am stuck in a boot loop. Does anyone have any idea of how to get this phone working again??
Revolutionary
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO-10.14.9035.01_M
eMMC-BOOT
Jan 13 2012.17:33:34
I have successfully rooted a HTC sensation before. My phone got stolen out of my work truck and this is the replacement phone I just got yesterday and was going to do go through all the stuff to install android revolution HD on it. and right after s-off it boot looped. Next step was to install clockwork mod and thats where im stuck. I have no recovery installed because that was the next step. Any insight/help appreciated thanks
If you a have sd card adapter, you can download CWM Recovery form Here rename it PG58IMG and put on the root of sd card.
Put your sd card back into the phone and reboot in bootloader and it will install recovery. When you are done, delete or rename PG58IMG from sd card.
Btw what is your model Id?
Download terminal emulator from the market and detect it by typing "getprop ro.mid" (without quotes).
Inside the PG58IMG there is a text file with MID and CIDs which you could eventually edit in case of mismatch.
Hope it helps!
Also, instead of CWM you could try installing 4ext
Sent from my HTC Sensation using XDA
Ok I will try that. I looked under battery on my phone it say PG58100. SInce I cant get into my phone because of the boot loop I cannot download that program you mentioned. So should I open the android-info.txt in the PG58IMG and change
modelid: PG5813000
to
modelid: PG5810000
????
and then try the update?
lackdog said:
Ok I will try that. I looked under battery on my phone it say PG58100. SInce I cant get into my phone because of the boot loop I cannot download that program you mentioned. So should I open the android-info.txt in the PG58IMG and change
modelid: PG5813000
to
modelid: PG5810000
????
and then try the update?
Click to expand...
Click to collapse
I would try and see if it goes
Btw I see that your firmware is a ICS. Are you sure you downloaded the right firmware for your CID?
Read here very carefully
lackdog said:
Ok I will try that. I looked under battery on my phone it say PG58100. SInce I cant get into my phone because of the boot loop I cannot download that program you mentioned. So should I open the android-info.txt in the PG58IMG and change
modelid: PG5813000
to
modelid: PG5810000
????
and then try the update?
Click to expand...
Click to collapse
If you have adv setup and can boot to bootloader
you can try installing 4ext recovery using fastboot commands.....here is link for touch recovery image
http://forum.xda-developers.com/showthread.php?t=1377759
Command
Fastboot flash recovery recovery.img
from my HTC Sensation XE with Beats Audio using XDA
Just wondering if you flashed a wrong PG58IMG (ICS firmware instead of recovery).
You are on ICS firmware now but your rom is a GB I guess. This can be the reason of boot loop.
If this is the case read carefully and download the right PG58IMG (firmware 1.17 if your rom is a Gingerbread) from here.
Unfortunately all the bootloader flashable zips are named PG58IMG, but their content is different.
Heres what I did. Took phone out of the box. turned it on. used it for a couple minutes. Then I did the whole revolutionary s-off process. Then I did this
-----------------------------------------------
STEP 2. To INSTALL Recovery - v5.0.0.8
1. Download recovery v5.0.0.8 for the Sensation HERE: or Multiupload
2. Copy the PG58IMG file into the Root folder of your SD card (The main Folder of your Memory Card)
3. Turn off your phone FUlly and reboot into the Bootloader/HBOOT screen (see post above on how to get to hboot screen)
4. Press Volume up to Accept when it asks" Do you want to start the update"
5. Press Power Off to Reboot back to android after installation is successful (normal screen with homescreen)
6. Delete PG58IMG from your memory card and you can now root using step 3 below or install a custom ROM using CWM (Customs Roms are already rooted)
--------------------------------------------------
I downloaded the older 5.0.0.8 because it worked for me in the past when I rooted my old HTC sensation.
Now its saying no image even though I renamed it to PG58IMG.zip
And it still stuck on a loop. SO alls I did so far was s-off a brand new phone.
Thank you all. Phone is back to normal. I did the 1.17 firmware that kualmente mentioned. So now my phone is a stock phone but just S-off'd. The next step is to install a recovery. Do i even have to install clockwork mod or can I just put on 4EXT recovery? if so how. I was just following directions from this thread.
http://forum.xda-developers.com/showthread.php?t=1192300
And step two says to install clockwork mod so thats what I was going to do. but I know i need 4EXT later anyway to install android revolution
I personally prefer 4ext touch recovery but basically both cwm and 4ext have same functions.
There is a nice tool to easily install 4ext recovery touch HERE
I'm all back up and running android revolution 6.5.5
Thanks for all your quick responses.
uys a question my htc xe is stuck in a loop.. keeps rebooting to htc screen everytime and restarts.
Here are my details
PYRAMID PVT SHIP S-ON RL
HBOOT-1.27.0000
eMMC-boot
i unlocked the bootloader with htcdev.
i flashed the boot.img via fastboot from PC and tried to fix the wifi error.
This was the link i went http://forum.xda-developers.com/show...1469428&page=2
Thanks a million for all the help.
What ROM are you trying to boot ?
If it is an ICS ROM you must have 3.32 firmware
azzledazzle said:
What ROM are you trying to boot ?
If it is an ICS ROM you must have 3.32 firmware
Click to expand...
Click to collapse
sorry i am still new at this.. let me explain everything from the start..i used htc dev to unlock the bootloader.. managed to root it..and i managed to flash Virtuous Inquisition ICS.. there was a wifi problem so i tried to flash the boot.img from the link in my first post.. and there the problem occurred..after i restarted.. it just kept restarting and restarting. I have no idea what to do now. T_T
Boot into Bootloader (volume down + power) and tell me what numbers are next to HBOOT
Also, when flashing virtuous ROM, Did you flash 3.32 firmware ???
azzledazzle said:
Boot into Bootloader (volume down + power) and tell me what numbers are next to HBOOT
Also, when flashing virtuous ROM, Did you flash 3.32 firmware ???
Click to expand...
Click to collapse
Hboot 1.27.0000
No i didnt flash the 3.32 firmware...
You flashed the firmware (otherwise you wouldn't have hboot 1.27).
Most probably you did'nt flash the rom and you are still on GB. This is why it bootloops.
Did you install a custom recovery (cwm or 4ext)? If not do it and then flash the rom from recovery
kualmente said:
You flashed the firmware (otherwise you wouldn't have hboot 1.27).
Most probably you did'nt flash the rom and you are still on GB. This is why it bootloops.
Did you install a custom recovery (cwm or 4ext)? If not do it and then flash the rom from recovery
Click to expand...
Click to collapse
I was on official ICS on my HTC XE before i went to root and install custom rom.
hmm i have cwm.. i ran the recovery but it still gave me the bootloop..
Qiwei said:
I was on official ICS on my HTC XE before i went to root and install custom rom.
hmm i have cwm.. i ran the recovery but it still gave me the bootloop..
Click to expand...
Click to collapse
I didn't know that sensations are already shipped with ICS. By the way are you still s-on or you s-off and root?
guys thanks its ok already i managed to get back to my custom rom! Thanks alot for all the help and fast response!! A million thanks to everyone of you!!
---------- Post added at 05:28 AM ---------- Previous post was at 05:26 AM ----------
kualmente said:
I didn't know that sensations are already shipped with ICS. By the way are you still s-on or you s-off and root?
Click to expand...
Click to collapse
hmm no it wasnt shipped with ICS. I updated it OTA for the official update. I am on S-on with root.. i unlocked my bootloader with htcdev
So today i rooted my sensation and everything was running perfectly until i downloaded a rom on rom manager. When the rom finished (miui) i clicked on it and a pre-installation window came up. It gave me 3 options, back up existing rom, wipe data and cache and wipe dalvik and all i checked was wiped dalvik. Now when the when it boots up it just shows me a white screen with the htc logo on it then turns black and repeats again. Please i need help urgently!!!!!
Pull the battery, put it back, and boot into hboot (Vol. Down + power button) tell me what it says
Sent from outer space 3000 years in the future (with my now extremely outdated, but still freaking awesome, HTC Sensation Z710e)
http://forum.xda-developers.com/show....php?t=1542555
will help with bootloops and updating if needed if you stuck
Sensation-al! said:
Pull the battery, put it back, and boot into hboot (Vol. Down + power button) tell me what it says
Sent from outer space 3000 years in the future (with my now extremely outdated, but still freaking awesome, HTC Sensation Z710e)
Click to expand...
Click to collapse
it says
Revolutionary
Pyramid pvt ship s-off
hnoot-1.27.1100
radio010.14.9035.01_m
emmc-boot
jan 13 2012,17:33:34
and it tries to update but it says
cid incorrect!
Update fail!
press (power) to reboot
craven667 said:
http://forum.xda-developers.com/show....php?t=1542555
will help with bootloops and updating if needed if you stuck
Click to expand...
Click to collapse
when i click on the link it says 404 page not found
Fcb107 said:
So today i rooted my sensation and everything was running perfectly until i downloaded a rom on rom manager. When the rom finished (miui) i clicked on it and a pre-installation window came up. It gave me 3 options, back up existing rom, wipe data and cache and wipe dalvik and all i checked was wiped dalvik. Now when the when it boots up it just shows me a white screen with the htc logo on it then turns black and repeats again. Please i need help urgently!!!!!
Click to expand...
Click to collapse
You needed to supercid first. Now run ics ruu which will wipe all ur partitions any will install stock Rom and recovery. Then supecid first. When you install any different Rom always superwipe.
Sent from my HTC Sensation using xda premium
jasminthoria said:
You needed to supercid first. Now run ics ruu which will wipe all ur partitions any will install stock Rom and recovery. Then supecid first. When you install any different Rom always superwipe.
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
how would i be able to supercid if i cant even get to my home screen?
1. Remove your sdcard (because you have a PG58IMG on it and I don't know which one).
2. Boot into bootloader and connect with adb and enter the following:
Code:
adb devices
[COLOR="Red"]make sure your device is detected[/COLOR]
fastboot oem writecid 11111111
[COLOR="red"]wait for it to write[/COLOR]
fastboot reboot-bootloader
[COLOR="red"]wait to reboot into bootloader[/COLOR]
fastboot getvar cid
[COLOR="red"]confirm it reads "11111111"[/COLOR]
(now power off your device)
3. Now using a card reader on your computer, delete your current PG58IMG (because I don't know what you have on there).
Download the 3.32 firmware from here:
http://forum.xda-developers.com/showthread.php?t=1412618
Download the superwipe***.zip from here:
http://forum.xda-developers.com/showthread.php?t=1098849
Place them on the root of your sdcard and put the card back into your phone.
4. Now boot into bootloader (power/volume down) and wait for it to detect the firmware. (volume up to accept) wait for it to flash and then press power to reboot when it prompts.
5. Power off, remove sdcard and delete your PG58IMG on computer, re-insert and boot into bootloader and select recovery.
Select and flash the superwipe***.zip
Select and flash your MIUI ROM
***NOW REBOOT INTO YOUR NEW MIUI***
not sure posted with phone here is link
http://forum.xda-developers.com/showthread.php?t=1542555
Ok thanks for all your help i have done the supercid and now it has no more boot loop but there is another problem. I have s-off and revolutionary but when i do a root check on Root check basic i says sorry this device does not have proper root access. I was wondering why i do not have root access. thanks
If you are installing a custom ROM, such as ARHD, you are automatically rooted.
Why not do this?
Rom go on past step 5 on my post and flash a new Rom after update your not rooted just s-on
Sent from my Sensation 4G using xda premium
U have to update firmware for most Roma now days 3.32 or you will loop again
Sent from my Sensation 4G using xda premium
Fcb107 said:
Ok thanks for all your help i have done the supercid and now it has no more boot loop but there is another problem. I have s-off and revolutionary but when i do a root check on Root check basic i says sorry this device does not have proper root access. I was wondering why i do not have root access. thanks
Click to expand...
Click to collapse
Did you ever flash superuser from recovery? I'll post a dropbox link...
http://db.tt/GH2jDUVJ
Sent by Telepathy
Solution
Happened to me after installing the 3.32 firmware...just remove the battery and install a rom...it will work out fine..
help please
hi i am also stuck in a boot loop i tried this new wire trick and control bear reset my phone and basically removed my recovery so i restored recovery using fastboot usb which it did i thought all my problems were solved... i did a resore which it went through but now the phones does not boot just to sensation screen and loops again i am at a complete lost of what to do i did the htc dev unlock, i am s on with h boot 1.23 dont know what rom to flash
please help me
robbani123 said:
hi i am also stuck in a boot loop i tried this new wire trick and control bear reset my phone and basically removed my recovery so i restored recovery using fastboot usb which it did i thought all my problems were solved... i did a resore which it went through but now the phones does not boot just to sensation screen and loops again i am at a complete lost of what to do i did the htc dev unlock, i am s on with h boot 1.23 dont know what rom to flash
please help me
Click to expand...
Click to collapse
you were successful with JB SOFF ?
can you post the details of you Hboot status, S-on/s-off status,radio ?(screen shot would be better)
whats your cid?
also what rom you used to have before bootloop?
hi it shows
unlocked
pyramid pvt s on rl
hboot 1.23.0000
radio 11.19.3504.29.2
openadsp v01.6.0.2226.00.1227
eMMc-boot
dec 26 2001
so was unsucessful with s off now it just keeps rebooting i have tried various roms revolution ginger bread, insert coin ics,and have tried to resore original rom but as i say nothing works basically while using control bear it resest my phone and took out my recovery i had ext4on there so i reinstalled recovery cwm which worked but nothing is working am i basically looking at a brick here?
would very much appreciate any advice
robbani123 said:
hi it shows
unlocked
pyramid pvt s on rl
hboot 1.23.0000
radio 11.19.3504.29.2
openadsp v01.6.0.2226.00.1227
eMMc-boot
dec 26 2001
so was unsucessful with s off now it just keeps rebooting i have tried various roms revolution ginger bread, insert coin ics,and have tried to resore original rom but as i say nothing works basically while using control bear it resest my phone and took out my recovery i had ext4on there so i reinstalled recovery cwm which worked but nothing is working am i basically looking at a brick here?
would very much appreciate any advice
Click to expand...
Click to collapse
If you have Sensation XE Go and download this one PG58IMG.zip, it will install Stock GB rom for you http://vi8.info/HTC-Sensation/Sensation-XE/ , in case that you have ordinary sensation, download 04.RUU-Pyramid-HTC-Europe-1.50.401.1-Radio-10.56.9035.00U-10.14.9035.01-M-release-223042-signed.exe from http://vi8.info/HTC-Sensation/.
Procedures for PG58IMG:
1UT the file on your sd card
2. Press volume down and power (together)
3.follow the instruction on screen
Procedures for RUU
1. Start the .RUU-Pyramid-HTC-Europe-1.50.401.1 on PC
2.Turn on your phone with volume down and power to enter in bootloader
3.Follow the instruction on PC screen
4. When asked connect your phone to PC
Hope it help
Dublinz I think he can't run RUU of lower hboot as he is son... AFAIK he can only run ics RUU
sent from my blazing fast pyramid through sonic waves