Help! Installation ClockWorkMod writes fail-pu ... PG58IMG.zip any file does not install. Knowledgeable people tell me what's the problem?
FausFear said:
Help! Installation ClockWorkMod writes fail-pu ... PG58IMG.zip any file does not install. Knowledgeable people tell me what's the problem?
Click to expand...
Click to collapse
flash through HBOOT, not recovery
Jonny said:
flash through HBOOT, not recovery
Click to expand...
Click to collapse
how to do it? I am not strong in this (((if you can for more info ...
1st got to settings>power and uncheck fastboot. then power phone completely off.
Next hold vol-down and power until white htc appears.
It will go to bootloader and automatically see the PD58IMG.zip
Oomike said:
1st got to settings>power and uncheck fastboot. then power phone completely off.
Next hold vol-down and power until white htc appears.
It will go to bootloader and automatically see the PD58IMG.zip
Click to expand...
Click to collapse
I ROM is not installed, when you switch displays in FASTBOOT! PD58IMG.zip can not install says in red letters Fail-PU ...
in my opinion I have with HBOOT 1.20.0000 problems. because I started to install automatic ROM ICS 4.0 with the file PD58IMG.zip, there is not the end everything was installed, some written as FAIL-PU.
I've read that if you try to flash the firmware update for hboot 1.20 if you don't have supercid some files may fail to update
Sent from my Kindle Fire using Tapatalk
ar4l said:
I've read that if you try to flash the firmware update for hboot 1.20 if you don't have supercid some files may fail to update
Sent from my Kindle Fire using Tapatalk
Click to expand...
Click to collapse
tell me how to update? I'm from Russia, it is very difficult to translate and communicate. I ask how you can in a simplified form.
Give us some background info. Was your phone rooted in the first place? Did you follow the path s-off then clockwokmod recovery then root then supercid? What did you do before this happened? Did you try to install the latest RUU 3.06 where hboot 1.20 comes? We are happy to help but it's not easy trying to solve something without some info
Sent from my Kindle Fire using Tapatalk
phone s-off, root, super cid, it all started after trying to flash (Sensation ICS 3.06.401.1 - Rooted PG58IMG.ZIP) all the checkboxes have been installed in the firmware partition except system and even some I do not remember. After re-flashing, all the ticks became Fail-PU.
FausFear said:
phone s-off, root, super cid, it all started after trying to flash (Sensation ICS 3.06.401.1 - Rooted PG58IMG.ZIP) all the checkboxes have been installed in the firmware partition except system and even some I do not remember. After re-flashing, all the ticks became Fail-PU.
Click to expand...
Click to collapse
so, first, did you check the md5 checksum to see if your download wasn't corrupted? Some times I use winmd5sum portable because I don't need to install it in my computer. http://download.cnet.com/WinMd5Sum-Portable/3000-2381_4-75099291.html
You noticed that you are flashing a rom for the sensation not the sensation xe (this one is the 401.101) some differences are discussed here but is an advanced topic.
if everything is ok this is how you install a pg58img.zip using the bootloader
place pg58img.zip in sd card
turn off phone if you are not sure the phone is really off take battery out and put it back
press and keep holding VOL DOWN
press and keep holding POWER until you enter the bootloader
pg58img is automatically detected and you are asked if you want to update
after installation of all packages is finished reboot your phone
I was checking the pg58img and seems to be the RUU: the firmware update plus the rooted stock rom and the custom recovery.
although s-off and supercid are persistent and not modified with this firmware update your hboot 1.2000 is now locked and you may not be able to use fastboot commands or install some packages like radios (maybe that's happening to you when it says fail-pu)
to regain unlocked hboot you can use the tools at htcdev to unlock hboot 1.20 or you can download the hboot 1.17 onlocked from here
before you do that don't forget to delete the pg58 img that you hace in your sd card and then place this one in its place.
cheers
this is all I've done (Fail-PU) (((((
FausFear said:
phone s-off, root, super cid, it all started after trying to flash (Sensation ICS 3.06.401.1 - Rooted PG58IMG.ZIP) all the checkboxes have been installed in the firmware partition except system and even some I do not remember. After re-flashing, all the ticks became Fail-PU.
Click to expand...
Click to collapse
so, first, did you check the md5 checksum to see if your download wasn't corrupted? Some times I use winmd5sum portable because I don't need to install it in my computer. http://download.cnet.com/WinMd5Sum-Portable/3000-2381_4-75099291.html
You noticed that you are flashing a rom for the sensation not the sensation xe (this one is the 401.101) some differences are discussed here but is an advanced topic.
if everything is ok this is how you install a pg58img.zip using the bootloader
place pg58img.zip in sd card
turn off phone if you are not sure the phone is really off take battery out and put it back
press and keep holding VOL DOWN
press and keep holding POWER until you enter the bootloader
pg58img is automatically detected and you are asked if you want to update
after installation of all packages is finished reboot your phone
I was checking the pg58img and seems to be the RUU: the firmware update plus the rooted stock rom and the custom recovery.
although s-off and supercid are persistent and not modified with this firmware update your hboot 1.2000 is now locked and you may not be able to use fastboot commands or install some packages like radios (maybe that's happening to you when it says fail-pu)
to regain unlocked hboot you can use the tools at htcdev to unlock hboot 1.20 or you can download the hboot 1.17 onlocked from here
before you do that don't forget to delete the pg58 img that you hace in your sd card and then place this one in its place.
cheers
ar4l said:
so, first, did you check the md5 checksum to see if your download wasn't corrupted? Some times I use winmd5sum portable because I don't need to install it in my computer. http://download.cnet.com/WinMd5Sum-Portable/3000-2381_4-75099291.html
You noticed that you are flashing a rom for the sensation not the sensation xe (this one is the 401.101) some differences are discussed here but is an advanced topic.
if everything is ok this is how you install a pg58img.zip using the bootloader
place pg58img.zip in sd card
turn off phone if you are not sure the phone is really off take battery out and put it back
press and keep holding VOL DOWN
press and keep holding POWER until you enter the bootloader
pg58img is automatically detected and you are asked if you want to update
after installation of all packages is finished reboot your phone
I was checking the pg58img and seems to be the RUU: the firmware update plus the rooted stock rom and the custom recovery.
although s-off and supercid are persistent and not modified with this firmware update your hboot 1.2000 is now locked and you may not be able to use fastboot commands or install some packages like radios (maybe that's happening to you when it says fail-pu)
to regain unlocked hboot you can use the tools at htcdev to unlock hboot 1.20 or you can download the hboot 1.17 onlocked from here
before you do that don't forget to delete the pg58 img that you hace in your sd card and then place this one in its place.
cheers
Click to expand...
Click to collapse
this is all I've done (Fail-PU) (((((
FausFear said:
this is all I've done (Fail-PU) (((((
Click to expand...
Click to collapse
it failed when trying to flash the recovery which is custom and no stock. try flashing the firmware update only without recovery or rom. you can find it here, that's what i did first flashed the firmware only and after that a rom (android revolution 5.0.2 currently)
anyway, I was talking to some other guys and if noting works you can download a shipped RUU (there's a collection here). Run the exe file and you'll finish with a stock gingerbread system. You'll have to root and install custom recovery and the usual again. If after that you still feel like trying ICS install the firmware update only, not the one you tried.
cheers
Yet another example of someone jumping blind into something they don't understand. If you don't know how to reverse the rooting process you should not even consider rooting in the first place.
There should be some sort of test before rooting information is given out - would stop n00bs getting themselves up **** creek
FausFear said:
this is all I've done (Fail-PU) (((((
Click to expand...
Click to collapse
Are you super cid, if not do so now a d flash custom firmware. Super cid us a low level fastbiit command and can be done on hboot 1.20
Sent from my HTC Sensation Z710e using xda premium
d3vilskid said:
Are you super cid, if not do so now a d flash custom firmware. Super cid us a low level fastbiit command and can be done on hboot 1.20
Sent from my HTC Sensation Z710e using xda premium
Click to expand...
Click to collapse
how to make low level fastbiit command?
FausFear said:
how to make low level fastbiit command?
Click to expand...
Click to collapse
Oh dear.......
He is saying SuperCID IS a low level fastboot command, you cannot make one
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
http://www.youtube.com/watch?feature=player_detailpage&list=HL1325964886&v=TaMhxD_aowA
here's a video look
Related
Hey guys,
any ideas on this.
I used the PG58IMG.zip with the new firmware update for only the hboot and radio. The hboot was flashed, i'm now on "locked" 1.20.... but the radio "11.." wasn't flashed. Now i'm having issues with some dialer stuff and net connectivities. So my guess is i need to flash the new radio file.
The thing is i can't flash the radio anymore. fastboot won't work on this new hboot, and i can't use the PG58IMG files anymore.
When trying to use a PG58IMG file, i'm getting the cid error.
RESOLVED:
fastboot cid commands still work on hboot 1.20, just get your phone into hboot, and try supercid, this worked for me.
Have you tried doing it with Flashboot ? In the command window typing the flash command, it should be unzipped into a clean folder at your system disk root (C...
Levraimatt said:
Have you tried doing it with Flashboot ? In the command window typing the flash command, it should be unzipped into a clean folder at your system disk root (C...
Click to expand...
Click to collapse
if i try any fastboot command, it's only waiting for device, that's it.
there is a thread somewhere on here with a tut on how to get back to hboot old unlocked hboot so you can flash new radio then flash new hboot
here it is my friend http://forum.xda-developers.com/showpost.php?p=20681060&postcount=22
Is your phone on charge mode and USB debug ? You might want to try switching between charge mode and USB disk
boroboy69r said:
there is a thread somewhere on here with a tut on how to get back to hboot old unlocked hboot so you can flash new radio then flash new hboot
here it is my friend http://forum.xda-developers.com/showpost.php?p=20681060&postcount=22
Click to expand...
Click to collapse
thanks, but this is the problem, i can't flash the zip file, i'm getting cid errors after flashing the new firmware zip file.
Levraimatt said:
Is your phone on charge mode and USB debug ? You might want to try switching between charge mode and USB disk
Click to expand...
Click to collapse
i'm switching between all options, but it is known that hboot 1.20... doesn't support fastboot yet, so that's something else.
for now i'm back to gingerbread, but i really liked ics, let's hope somebody will find a way to use fastboot on 1.20...
give it a try put downloaded zip on root of sd card go into bootloader and phone should see file and flash.
this is just what i have read on the ICS firmware thread.
boroboy69r said:
give it a try put downloaded zip on root of sd card go into bootloader and phone should see file and flash.
this is just what i have read on the ICS firmware thread.
Click to expand...
Click to collapse
yeah it sees the update, it's trying to auto install, can't choose yes or no, it's just scanning for the PG files and when it's trying to install the zip file it stops with a incorrect cid error.
install complete ruu (released by rc team), that'll install everything including radio, after that install any custom ICS rom you like, i found this method safest.
be sure to super cid your phone.
umartariq said:
install complete ruu (released by rc team), that'll install everything including radio, after that install any custom ICS rom you like, i found this method safest.
be sure to super cid your phone.
Click to expand...
Click to collapse
Supercid after flashing right... I can't supercid now because of fastboot not working with my hboot.
Sent from my HTC Sensation XE with Beats Audio using XDA App
http://www.filefactory.com/f/c87a2330449af512/
Which one is it ?
Sent from my HTC Sensation XE with Beats Audio using XDA App
Aftermath
I have the new hboot using supercid, now should i go back to TMOB010 or just sit on 11111111
peewster said:
Supercid after flashing right... I can't supercid now because of fastboot not working with my hboot.
Sent from my HTC Sensation XE with Beats Audio using XDA App
Click to expand...
Click to collapse
Well, you can always unlock the bootloader with htcdev. Then you can use fastboot again.
Sent from my Kindle Fire using Tapatalk
peewster said:
Hey guys,
any ideas on this.
I used the PG58IMG.zip with the new firmware update for only the hboot and radio. The hboot was flashed, i'm now on "locked" 1.20.... but the radio "11.." wasn't flashed. Now i'm having issues with some dialer stuff and net connectivities. So my guess is i need to flash the new radio file.
The thing is i can't flash the radio anymore. fastboot won't work on this new hboot, and i can't use the PG58IMG files anymore.
When trying to use a PG58IMG file, i'm getting the cid error.
Any advice ?
Click to expand...
Click to collapse
Here's some advice. I was having the same problem you were. What I realized was that I was unable to check my cid or use fastboot options because I was running a ics Rom which breaks fastboot. I'm tmous and my cid wasn't in firmware by default. So after trying to flash the update I ended up with the updated hboot 1.20 that said locked (supposedly just says locked but really isnt) I kept reading every page of the firmware thread and I found someone who added the tmous cid to the firmware update and posted a drop box link which worked like a charm. I reflashed that one and now I have new radio and firmware and my phone is much smoother. Hopefully this works for you as it sounds like exactly what I went thru. Going to go find you the link now
Edit* here you go, let me know how it works out
http://forum.xda-developers.com/showthread.php?p=20863998
Sent from Mars using ICS
Here's an eeasier method. Flash the Eng hboot via bootloader. Then do supercid Then redo the firmware update again. It won't fail in my opinion
blahbl4hblah said:
Here's an eeasier method. Flash the Eng hboot via bootloader. Then do supercid Then redo the firmware update again. It won't fail in my opinion
Click to expand...
Click to collapse
eng hboot ? where can i find that
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
Ladicx said:
Here's some advice. I was having the same problem you were. What I realized was that I was unable to check my cid or use fastboot options because I was running a ics Rom which breaks fastboot. I'm tmous and my cid wasn't in firmware by default. So after trying to flash the update I ended up with the updated hboot 1.20 that said locked (supposedly just says locked but really isnt) I kept reading every page of the firmware thread and I found someone who added the tmous cid to the firmware update and posted a drop box link which worked like a charm. I reflashed that one and now I have new radio and firmware and my phone is much smoother. Hopefully this works for you as it sounds like exactly what I went thru. Going to go find you the link now
Edit* here you go, let me know how it works out
http://forum.xda-developers.com/showthread.php?p=20863998
Sent from Mars using ICS
Click to expand...
Click to collapse
Nice another option, thanks!
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
Ladicx said:
Here's some advice. I was having the same problem you were. What I realized was that I was unable to check my cid or use fastboot options because I was running a ics Rom which breaks fastboot. I'm tmous and my cid wasn't in firmware by default. So after trying to flash the update I ended up with the updated hboot 1.20 that said locked (supposedly just says locked but really isnt) I kept reading every page of the firmware thread and I found someone who added the tmous cid to the firmware update and posted a drop box link which worked like a charm. I reflashed that one and now I have new radio and firmware and my phone is much smoother. Hopefully this works for you as it sounds like exactly what I went thru. Going to go find you the link now
Edit* here you go, let me know how it works out
http://forum.xda-developers.com/showthread.php?p=20863998
Sent from Mars using ICS
Click to expand...
Click to collapse
I see you have a tmous phone,i'm on Vodafone NL, so your cid won't work with my phone.
Hello everyone.
First - sorry for the terrible english.
I try to flash new OTA ISC on my Sensation( s-on ..completely stock).
Download update.
flash Country ID from my id то fastboot oem writecid HTC__Y13
Then check for update and found.
Update started normaly.
Fisrt loading, second ... and reboot.
Started HTC logo .. and reboot.. and reboot ... and reboot.
:/
Blootloader working..
s-on
Hboot-1.27.0000
:/
I trIed to unlock from HTCDev .... but still s-on(yes i readed letter)
I tried to flash
RUU-Pyramid-HTC-Europe-1.50.401.1-Radio-10.56.9035.00U-10.14.9035.01-M-release-223042-signed.exe
but i have error.
:/
What error?
It seems that there are some incompatibility issues with HBOOT 1.27 on Sensation. Many people including me are getting bootloops with any ROM.
try reverting back to stock 1.17 firmware
shiningarmor said:
try reverting back to stock 1.17 firmware
Click to expand...
Click to collapse
How? :/ :/ :/ :/
http://dl.dropbox.com/u/34780422/1.png
Error:
http://dl.dropbox.com/u/34780422/2.png
Possibly bricked my phone
Hi All,
I'm somewhat noobish. I wanted to install Cyanogenmod for my HTC Sensation 4G on T-mobile.
I achieved S-OFF, installed clockworkmod, created a back up, wiped the phone and flashed the new ROM and the google apps zip file. After I entered my gmail info, it was up and running, but with no reception. It wouldn't recognize any signal, so I figured it was something with the radio. I tried to install the PG58IMG.zip to fix it. I then went to recovery mode, and it started loading but immediately would say:
SD Checking...
Loading...[PG58DIAG.zip]
No image!
Loading...[PG58DIAG.nbh]
No image or wrong image!
Loading...[PG58IMG.zip]
Then it says:
Parsing...[SD ZIP]
[1] RECOVERY
Do you want to start update?
Whether I select yes or no, it just asks to reboot, and when I do, it goes back to locking on the initial HTC screen. Any help would be much appreciated!
What happens if you remove the SD card ?
Voklav said:
http://dl.dropbox.com/u/34780422/1.png
Error:
http://dl.dropbox.com/u/34780422/2.png
Click to expand...
Click to collapse
If you're S-ON you can't go back to an older version. If you're S-OFF you also need Super CID to flash an older RUU
@Voklav
hi, i have the same issue, stock, and failed OTA
HBOT 1.27, s-off ,unable to boot and total bootloop.
however,
1. i get package from this post
http://forum.xda-developers.com/showthread.php?t=1525652
2.unzip it
3.find "firmware.zip" and rename it to PG58IMG.zip
4.copy into root of your SD-CARD
5. go to the bootloader it should flash the zip file
6. confim when asked that you want to flash.
7. reboot after process is finished.
it's worked for me, this zip, is from official OTA update,
and before i found that, i try to downgrade HBOOT, flash restore, but always fail (S-OFF)
hope i helped.
regards.
Capano
No no if he used htcdev so he have unlocked bootloader. So its 155 error . Just relock bootlaoder anv run ruu . It need to go all the way
Sent from my HTC Sensation Z710e using xda premium
@gefilus,
with S-ON, and HBOT-1.27 ?. at this moment there is no RUU applicable to this HBOT version.
Capano said:
@gefilus,
with S-ON, and HBOT-1.27 ?. at this moment there is no RUU applicable to this HBOT version.
Click to expand...
Click to collapse
Ok mby. Im not in sensation so much but in desire s. Usaly this problem can be solved simple. He used htc dev . You cant use stock ruu with unlocked bootloader, it will error, it need to be relocked, and i dont know if it works or no but i know with misc_version you can trick program
Sent from my HTC Sensation Z710e using xda premium
gefilus said:
Ok mby. Im not in sensation so much but in desire s. Usaly this problem can be solved simple. He used htc dev . You cant use stock ruu with unlocked bootloader, it will error, it need to be relocked, and i dont know if it works or no but i know with misc_version you can trick program
Sent from my HTC Sensation Z710e using xda premium
Click to expand...
Click to collapse
i have this problem too
where can i find the stock ruu with unlocked bootloader?
thanks
cemeli said:
i have this problem too
where can i find the stock ruu with unlocked bootloader?
thanks
Click to expand...
Click to collapse
Use lazy mode. Flash eng hboot. It can be found in here somewhere, and but you need relock bootloader before you flash ruu. Or just flash eng hboot and then flash stock ruu
Sent from my HTC Sensation Z710e using xda premium
Capano said:
@Voklav
hi, i have the same issue, stock, and failed OTA
HBOT 1.27, s-off ,unable to boot and total bootloop.
however,
1. i get package from this post
http://forum.xda-developers.com/showthread.php?t=1525652
2.unzip it
3.find "firmware.zip" and rename it to PG58IMG.zip
4.copy into root of your SD-CARD
5. go to the bootloader it should flash the zip file
6. confim when asked that you want to flash.
7. reboot after process is finished.
it's worked for me, this zip, is from official OTA update,
and before i found that, i try to downgrade HBOOT, flash restore, but always fail (S-OFF)
hope i helped.
regards.
Capano
Click to expand...
Click to collapse
Yes you helped revive my Sensation. Instructions above cured my boot loop after I applied the OTA ICS update.
Many thanks,
I have been at this for 5 hours straight and I just can't find a SOLUTION...I've READ A LOT before posting this question...and still I can't find anything to help me. So can someone PLEASE HELP if you can. I will be as detailed as i can. I will start off with my phone specs and so forth: By the way i am on GB 2.3.4..
LOCKED
Pyramid PVT SHIP S-OFF RL
HBOOT- 1.27.000
Radio- 11.22.3504.07_M
OpenADSP-v02.6.0.2226.00.0131
emmc- boot
Okay, i wanted to download the ELEGANCIA ICS ROM but before i could i had to download a FIRMWARE PACKAGE(or just firmware). So i downloaded the Firmware from 3.32 RUU which is for the ELEGANCIA ROM...By the way, I DID THIS BEFORE I INSTALLED the ELEGANCIA ROM(i hadn't downloaded it yet..elegancia rom) I followed the instructions how to flash it. It said it would tell you what to do next..so i did it. Went into Recovery and flashed through sd and installed the ZIP file and when it asked if i wanted to udate it i pressed Yes...and then this is what HAPPENs NEXT.
It ask if i want to update and I do and then it says:
Parsing...[ SD ZIP]
[1] BOOTLOADER - Ok
Update Complete...
Press POWER to reboot.
So i press power and all it does is: BOOTS up and then TURNS OFF
It continues to do that...I believe it's called BOOT LOOPING.?
I pull out the battery and press VOL. Down plus POWER at the same tiime and it takes me back to the WHITE SCREEN and I see FASTBOOT, RECOVERY, FACTORY RESET, SIMLOCK and IMAGE CRC but does NOT let me choose. It automatically goes to HBOOT.
I have to pull battery or it will continue to BOOT itself on and off again. Even with the phone off, I connect it to my usb connection on my laptop and my device does not show on my laptop. Both the usb connection and usb cord are working properly.
That is my BIG PAIN in MY ASS right now!!
Can someone please help me.?
You will have to make your phone Super-CID or download the correct firmware package that fit your CID.
Super-CID makes you able to flash any firmware package etc.
Guide for Super-CID: http://forum.xda-developers.com/showthread.php?t=1192300
Sigg1996 said:
You will have to make your phone Super-CID or download the correct firmware package that fit your CID.
Super-CID makes you able to flash any firmware package etc.
Guide for Super-CID: http://forum.xda-developers.com/showthread.php?t=1192300
Click to expand...
Click to collapse
THANK YOU for the response but how do I do that if i can"t power my phone on since it just re boots?
I am on T Mobile USA. How do I know which Firmware Package to choose?
Find my post I will bump it in general
Sent from my HTC Sensation using xda premium
thekoopers said:
THANK YOU for the response but how do I do that if i can"t power my phone on since it just re boots?
I am on T Mobile USA. How do I know which Firmware Package to choose?
Click to expand...
Click to collapse
i think you have to retore your phone to stock if you cant log to hboot :/
if you can load to hboot then find the cid ( or just supercid -check my sig) then flash the correct firmware file
Sent from my HTC Sensation 4G using XDA App
namila007 said:
i think you have to retore your phone to stock if you cant log to hboot :/
if you can load to hboot then find the cid ( or just supercid -check my sig) then flash the correct firmware file
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
You stated that your ROM was GB and that's not supported on the 3.32 F/W.
Download your ICS ROM and mike's SuperWipe script from the ARHD thread.
Copy them to the SDcard via the PC and a USB <-> microSD adapter.
Delete the PG58IMG.zip file on the SDcard.
Boot the phone into Bootloader, get into Recovery, SuperWipe and flash the ROM.
You also have a locked version (1.27.0000) of the HBOOT, I suggest at some stage installing an unlocked version (1.27.1100) from: http://forum.xda-developers.com/showthread.php?t=1459767
namila007 said:
i think you have to retore your phone to stock if you cant log to hboot :/
if you can load to hboot then find the cid ( or just supercid -check my sig) then flash the correct firmware file
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
How do i restore to stock? I have already read the supercid but it does say phone has to be turned on and everytime i turn phone on it just turns off again then on..etc...
namila007 said:
i think you have to retore your phone to stock if you cant log to hboot :/
if you can load to hboot then find the cid ( or just supercid -check my sig) then flash the correct firmware file
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
craven667 said:
Find my post I will bump it in general
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
I just found your post and i will try and follow your instructions to the tee...if I have a problem with anything I will ask you on your post.
Thanks, craven667
thekoopers said:
How do i restore to stock? I have already read the supercid but it does say phone has to be turned on and everytime i turn phone on it just turns off again then on..etc...
Click to expand...
Click to collapse
Don't bother restoring to stock, waste of effort.
Read my previous post.
1. Anyway, did the ICS F/W update work ?
2. Is the PG58IMG.zip file still on the SDcard ? If so rename /delete it.
3. Get your chosen ICS ROM and mike's SuperWipe script onto the SDcard.
4. Go into recovery and run the Superwipe script then flash the ROM.
Steps 2 & 3 you'll need to use a PC to do these with a USB <-> microSD adapter.
I am assuming that there wasn't a typo in your original post in that you actually have HBOOT 1.27.0000, this is ICS ONLY firmware and GB won't work on it.
BTW what recovery have you got ? CWM or 4EXT ?
gol_n_dal said:
You stated that your ROM was GB and that's not supported on the 3.32 F/W.
Download your ICS ROM and mike's SuperWipe script from the ARHD thread.
Copy them to the SDcard via the PC and a USB <-> microSD adapter.
Delete the PG58IMG.zip file on the SDcard.
Boot the phone into Bootloader, get into Recovery, SuperWipe and flash the ROM.
You also have a locked version (1.27.0000) of the HBOOT, I suggest at some stage installing an unlocked version (1.27.1100) from: http://forum.xda-developers.com/showthread.php?t=1459767
Click to expand...
Click to collapse
I will try what you said to do.
Thanks, gol_sol.
Very much appreciated.
gol_n_dal said:
Don't bother restoring to stock, waste of effort.
Read my previous post.
1. Anyway, did the ICS F/W update work ?
2. Is the PG58IMG.zip file still on the SDcard ? If so rename /delete it.
3. Get your chosen ICS ROM and mike's SuperWipe script onto the SDcard.
4. Go into recovery and run the Superwipe script then flash the ROM.
Steps 2 & 3 you'll need to use a PC to do these with a USB <-> microSD adapter.
I am assuming that there wasn't a typo in your original post in that you actually have HBOOT 1.27.0000, this is ICS ONLY firmware and GB won't work on it.
BTW what recovery have you got ? CWM or 4EXT ?
Click to expand...
Click to collapse
+1 10 char. I also do not suggest to flash an RUU.
gol_n_dal said:
You stated that your ROM was GB and that's not supported on the 3.32 F/W.
Download your ICS ROM and mike's SuperWipe script from the ARHD thread.
Copy them to the SDcard via the PC and a USB <-> microSD adapter.
Delete the PG58IMG.zip file on the SDcard.
Boot the phone into Bootloader, get into Recovery, SuperWipe and flash the ROM.
You also have a locked version (1.27.0000) of the HBOOT, I suggest at some stage installing an unlocked version (1.27.1100) from: http://forum.xda-developers.com/showthread.php?t=1459767
Click to expand...
Click to collapse
gol_n_dal said:
Don't bother restoring to stock, waste of effort.
Read my previous post.
1. Anyway, did the ICS F/W update work ?
2. Is the PG58IMG.zip file still on the SDcard ? If so rename /delete it.
3. Get your chosen ICS ROM and mike's SuperWipe script onto the SDcard.
4. Go into recovery and run the Superwipe script then flash the ROM.
Steps 2 & 3 you'll need to use a PC to do these with a USB <-> microSD adapter.
I am assuming that there wasn't a typo in your original post in that you actually have HBOOT 1.27.0000, this is ICS ONLY firmware and GB won't work on it.
BTW what recovery have you got ? CWM or 4EXT ?
Click to expand...
Click to collapse
I just tried it and the phone is ON NOW BUT it is just on the White screen with the Green HTC letters. It has been on for 15 minutes already...By the way, I DO NOT have a microSD adapter. I did it by getting into CWM and going to Recovery and going into mounts and then i mounted it and was able to install it like that. Is that the reason why it is still on the White HTC screen? Do I pull the Battery?
Another thing I still haven't flashed my ICS Rom because when i DID Mike's SuperWipe it did it's thing and just automattically went to the White HTC screen.
No, there is NO TYPO, that is exactly what it says. I believe i still have CWM and I remember tthat I had 4ext to.
thekoopers said:
I just tried it and the phone is ON NOW BUT it is just on the White screen with the Green HTC letters. It has been on for 15 minutes already...By the way, I DO NOT have a microSD adapter. I did it by getting into CWM and going to Recovery and going into mounts and then i mounted it and was able to install it like that. Is that the reason why it is still on the White HTC screen? Do I pull the Battery?
Another thing I still haven't flashed my ICS Rom because when i DID Mike's SuperWipe it did it's thing and just automattically went to the White HTC screen.
No, there is NO TYPO, that is exactly what it says. I believe i still have CWM and I remember tthat I had 4ext to.
Click to expand...
Click to collapse
So precisely what have you got on the SDcard at the moment ?
PG58IMG.zip ?
SuperWipe.zip (or what ever the name is) ?
ICS ROM "zip" file ?
Edit: If you used the superwipe script you have no OS on the phone and will NEED to flash an ICS ROM through recovery. It shouldn't have gone to the white HTC screen just returned to CWM. If you don't have an ICS ROM on the phone's SDcard you can try adb pushing it or possibly use another device that has microUSB capability.
gol_n_dal said:
So precisely what have you got on the SDcard at the moment ?
PG58IMG.zip ?
SuperWipe.zip (or what ever the name is) ?
ICS ROM "zip" file ?
Edit: If you used the superwipe script you have no OS on the phone and will NEED to flash an ICS ROM through recovery. It shouldn't have gone to the white HTC screen just returned to CWM. If you don't have an ICS ROM on the phone's SDcard you can try adb pushing it or possibly use another device that has microUSB capability.
Click to expand...
Click to collapse
What I have now is Superwipe.zip and ICS ROM.zip. I deleted the PG58IMG that I had on the SD Card before I did the SUPERWIPE.
I pulled out the battery and got into recovery and installed from sdcard and I went to install ICS ROM and it started but then it said ABORTED. Tried again and said the same thing.
Should I try another ICS ROM?
What about not having the PG58IMG?
thekoopers said:
What I have now is Superwipe.zip and ICS ROM.zip. I deleted the PG58IMG that I had on the SD Card before I did the SUPERWIPE.
I pulled out the battery and got into recovery and installed from sdcard and I went to install ICS ROM and it started but then it said ABORTED. Tried again and said the same thing.
Should I try another ICS ROM?
What about not having the PG58IMG?
Click to expand...
Click to collapse
It seems that your ics ROM is corrupted. Did you check the md5sum of the ROM zip file?
Sent from my Sensation using Tapatalk
musarraf172 said:
It seems that your ics ROM is corrupted. Did you check the md5sum of the ROM zip file?
Sent from my Sensation using Tapatalk
Click to expand...
Click to collapse
I did not check that but I will Re-Flash and see if it works.
Thanks musarraf172
thekoopers said:
I did not check that but I will Re-Flash and see if it works.
Thanks musarraf172
Click to expand...
Click to collapse
In stead of writing "Thanks" please hit the thanks button...
OK, need a bit of help with a Desire S that can only get to HBOOT screen (vol down + power) otherwise it's just a white HTC screen.
Phone is S-ON. HBOOT 0.98.002.
I've tried Revolutionary.io's guide to convert to S-OFF but I just get 'Waiting for Device'. Tried uninstalling HTC drivers then installing again without luck, disabling firewall and AV, still no luck. Kinda given up on that front.
Trying 'fastboot devices', device is recognised, but if I try to flash a recovery ROM from fastboot I get an 'out of memory' error.
I don't know if USB debugging is enabled or not (how can I tell & enable from HBOOT if not)?
I thought about going via HTCDEV and their method, but my HBOOT is at the wrong version (can I upgrade it to V 2.000.2?)
I'm really running out of options now....anything else I can try??? HELPPPP!
Run htc ruu exe file and don't close the windows, find rom.zip in windows temp folder, rename it to PG88IMG.zip ale copy to sdcard. Turn on your phone in hboot mode, rom will be flashed automaticaly.
Or just go to fastboot mode in hboot and then run RUU, should work if you have bootloader locker (relocked).
amdr said:
Run htc ruu exe file and don't close the windows, find rom.zip in windows temp folder, rename it to PG88IMG.zip ale copy to sdcard. Turn on your phone in hboot mode, rom will be flashed automaticaly.
Or just go to fastboot mode in hboot and then run RUU, should work if you have bootloader locker (relocked).
Click to expand...
Click to collapse
Thanks. Noobish of me, but where do I download the relevant RUU file from? I don't know what carrier the phone is locked to by the way.
Download original ics rom here : http://dl4.htc.com/RomCode/Source_a...401.2_20.76.30.0835_3831.19.00.110_275068.zip
it has hboot 2!!!:fingers-crossed:
uberduder101 said:
Thanks. Noobish of me, but where do I download the relevant RUU file from? I don't know what carrier the phone is locked to by the way.
Click to expand...
Click to collapse
dave3002 said:
Download original ics rom here : .htc.com/RomCode/Source_and_Binaries/RUU_SAGA_ICS_35_S_HTC_EU_14.01.401.2_20.76.30.0835_3831.19.00.110_275068.zip
it has hboot 2!!!:fingers-crossed:
Click to expand...
Click to collapse
I couldn't open that, but thanks.
sorry, but I'm really not getting this. I'm looking for a RUU to flash a recovery ROM. When I went to HTC dev, there were all the ROMs for all the different carriers. I don't know what mine is. I tried downloading one for Vodafone, unzipped and searched for RUU.exe but there isn't one.
I need to get to this RUU.exe but dont know how.:crying:
what is a recovery ROM? anyway, people over here at the DS forum has already extracted the radio, Hboot and ROM of official ICS. search around...
Sent from my supercharged :tank:
I had a bit of progress. I downloaded the latest 4.0 RUU util from HTC Dev, ran it, extracted the ROM.zip and renamed it to PG88IMG.zip, copied it up to the SD card, rebooted the phone into FASTBOOT and the phone recognised it and started installing.
Wahey, I thought, that's it I've cracked it, but then it gets stuck on Updating the bootloader. Stuck for nearly an hour. Tried twice and different SD cards...same thing.
Is this because I'm still S-ON and bootloader is locked, or do you think my internal memory is fried?
uberduder101 said:
I had a bit of progress. I downloaded the latest 4.0 RUU util from HTC Dev, ran it, extracted the ROM.zip and renamed it to PG88IMG.zip, copied it up to the SD card, rebooted the phone into FASTBOOT and the phone recognised it and started installing.
Wahey, I thought, that's it I've cracked it, but then it gets stuck on Updating the bootloader. Stuck for nearly an hour. Tried twice and different SD cards...same thing.
Is this because I'm still S-ON and bootloader is locked, or do you think my internal memory is fried?
Click to expand...
Click to collapse
you can't flash that when you are s-on
Sent from my supercharged :tank:
uberduder101 said:
..., or do you think my internal memory is fried?
Click to expand...
Click to collapse
You're right, that's the case. Search and you'll see similar cases.
hisname said:
you can't flash that when you are s-on
Click to expand...
Click to collapse
Absolutely irrelevant. He's not flashing anything himself, he's executing RUU which can flash everything.
OK, so how do I enable USB debugging if I can only get into HBOOT? Is there a FASTboot or ADB command that can do it? I think that's what's stopping Revolutionary.
Jack_R1 said:
Absolutely irrelevant. He's not flashing anything himself, he's executing RUU which can flash everything.
Click to expand...
Click to collapse
if you read again, he said he was flashing the rom zip after extracting the rom from the RUU
Sent from my supercharged :tank:
hisname said:
if you read again, he said he was flashing the rom zip after extracting the rom from the RUU
Sent from my supercharged :tank:
Click to expand...
Click to collapse
And the difference is?
Sent from my HTC Desire S
FYI - I tried executing the RUU itself, and that just hangs too.
I'm going down the line of toasted internal memory and am now throwing in the towel. Besides I just can't spend any more time on it.
Thanks for all your help.
amidabuddha said:
And the difference is?
Sent from my HTC Desire S
Click to expand...
Click to collapse
difference is he isn't flashing the RUU, just the ROM
Sent from my supercharged :tank:
hisname said:
difference is he isn't flashing the RUU, just the ROM
Sent from my supercharged :tank:
Click to expand...
Click to collapse
And what means to flash a RUU? Do you see any RUU running on your phone?
Trying to help people is a good thing but not before trying the stuff yourself, knowing the differences, how it works and WHY it should be done
amdr said:
Run htc ruu exe file and don't close the windows, find rom.zip in windows temp folder, rename it to PG88IMG.zip ale copy to sdcard. Turn on your phone in hboot mode, rom will be flashed automaticaly.
Or just go to fastboot mode in hboot and then run RUU, should work if you have bootloader locker (relocked).
Click to expand...
Click to collapse
Same problem with this post!
When i followed your step, this has many time to wait. I'm waiting 45 minute but this just show:
Can you help me?
Do you have recovery?Can you get in? If you can fastboot then flash recovery and try to get in.Once in try to open info or just try to wipe all (no SD card) then you will see bricked or not.
SKENER said:
Do you have recovery?Can you get in? If you can fastboot then flash recovery and try to get in.Once in try to open info or just try to wipe all (no SD card) then you will see bricked or not.
Click to expand...
Click to collapse
i don't have recovery, when i press power, my device just show HTC with white screen
When I press power + volume down, then come to recovery, it's not show
Im trying to install a rom on my sensation with hboot 1.27 so far i have dev unlocked it and rooted it Also a few hours ago i also managed. To complete the Juopunutbear s-off method. with it asking me would i like to installJuopunutbear Hboot to witch i said yes. And that brings us to my current problem, I cant seem to install cwm I put the PG58IMG File on the sd card an booted into hboot but The file loads up and then fails telling me "Model Id Incorrect update fail press power to reboot." Also after using juopunutbear. To s-off my phone the bootloader. Now says Locked instead. Of unlocked is this normal?
THANKS
Lostmymind904 said:
Im trying to install a rom on my sensation with hboot 1.27 so far i have dev unlocked it and rooted it Also a few hours ago i also managed. To complete the Juopunutbear s-off method. with it asking me would i like to installJuopunutbear Hboot to witch i said yes. And that brings us to my current problem, I cant seem to install cwm I put the PG58IMG File on the sd card an booted into hboot but The file loads up and then fails telling me "Model Id Incorrect update fail press power to reboot." Also after using juopunutbear. To s-off my phone the bootloader. Now says Locked instead. Of unlocked is this normal?
THANKS
Click to expand...
Click to collapse
Check the md5 sum of the PG58IMG File.
Lostmymind904 said:
Im trying to install a rom on my sensation with hboot 1.27 so far i have dev unlocked it and rooted it Also a few hours ago i also managed. To complete the Juopunutbear s-off method. with it asking me would i like to installJuopunutbear Hboot to witch i said yes. And that brings us to my current problem, I cant seem to install cwm I put the PG58IMG File on the sd card an booted into hboot but The file loads up and then fails telling me "Model Id Incorrect update fail press power to reboot." Also after using juopunutbear. To s-off my phone the bootloader. Now says Locked instead. Of unlocked is this normal?
THANKS
Click to expand...
Click to collapse
Hi,
Look HERE
2. Flashing a recovery
Flash 4 EXT
The "Locked" just restricts the fastboot commands available to you.
If this is a problem ,look HERE
Second post,and apply this:
HBoot 1.27.1100 Patch (Go from Hboot 1.29.0000 to 1.27.1100)
DO NOT GO TO HTC TO UNLOCK YOUR PHONE WHILE YOU ARE S-OFF.
EfrainTrejo said:
Check the md5 sum of the PG58IMG File.
Click to expand...
Click to collapse
malybru said:
Hi,
Look HERE
2. Flashing a recovery
Flash 4 EXT
The "Locked" just restricts the fastboot commands available to you.
If this is a problem ,look HERE
Second post,and apply this:
HBoot 1.27.1100 Patch (Go from Hboot 1.29.0000 to 1.27.1100)
DO NOT GO TO HTC TO UNLOCK YOUR PHONE WHILE YOU ARE S-OFF.
Click to expand...
Click to collapse
I tried to flash recovery but it didn't work it tells me " writing recovery FAILED (Remote not allowed)" and the md5 is correct so no problems there
Lostmymind904 said:
I tried to flash recovery but it didn't work it tells me " writing recovery FAILED (Remote not allowed)" and the md5 is correct so no problems there
Click to expand...
Click to collapse
You have to flash the patched hboot first add suggested by @malybru . after that then you won't have a problem flashing a recovery.
Sent from my Ouya
AndroidSupporter318 said:
You have to flash the patched hboot first add suggested by @malybru . after that then you won't have a problem flashing a recovery.
Sent from my Ouya
Click to expand...
Click to collapse
I was unable to flash the hboot i would just get an error. I fixed my problem about 30 seconds ago by supercid the phone which allowed me to flash Juopunutbear Hboot and then recovery took me 8 hours to figure it out but i was determined.