I installed bigrushdog's development overlay (from here) on my Wingray 1.0.0 and now when I connect my Xoom to my PC via usb, it is not detected. When I disconnect it, the Xoom locks up and reboots.
Flash the Tiamat kernel on top of it. I think maybe a test kernel slipped in the boot image. Ill check it tonight and update if need be.
It works! I had to reflash BT5 though.
I had the same issues, and I just had to flash the kernel - thanks to both of you!!
Related
I Know this should be in the Developer section, but I don't have enough posts. (Since you have to have at least 10 to do so...)
BUT, I installed a kernel from Blades which is the 1.6ghz with the latest version of CWM. The problem is that whenever I try to boot up the device it just stays on the first startup screen, and it also makes a weird popping noise from the speakers about every 10 seconds. I did wipe Dalvik Cache and I also made a back up before installing the new kernel. I've tried restoring but it does the same thing every time. Before installing the kernel I was running PRIMEORDIAL! v3.1...
Any help would be greatly appreciated....
Thanks
cdp
Hi Mate, You are not the only one. Unfortuantely 3.0.1 kernels don't work too well with 3.1 roms as you have discovered.
Not to worry though as this is an easy fix.
Simply flash the 3.1 stock kernel and you're up and running again. You can get it from here... http://forum.xda-developers.com/showpost.php?p=14283676&postcount=94
Wow, I didn't even realize that kernel was only for 3.0.1 lol. THANK YOU! Flashed it and it started right up! C:
You may now have wifi problems, since the kernel update will have installed a different module to the one you need, if this is the case just reflash whatever rom you are using.
Okay cool, I'm on wifi now and it seems to be working fine. So thanks again! :]
Hi All,
I have a Xoom Wifi (Aussie) which I've flashed with Tiamat Hammerhead and Tachi Kernel. Wierdly I couldn't get the 3.2 OTA update but that's another story...
Anyway I'm having trouble getting PTP working with my Nikon. It worked with 3.1 stock, but as soon as I flashed Tiamat it stopped working. I have tried USBOTG with a flash drive, and that worked fine, but no PTP. Its kind of a pain because I use the Xoom with my camera a lot.
Anyone have any ideas? I don't know where to start!
Thanks in advance
Just an update to this: I re-flashed with the US version of the stock ROM, and updated to 3.2, then flashed the latest Tiamat kernel.
Now PTP will work to a point... Like, for the first few seconds of plugging in it will work perfectly, then it'll abruptly stop and not display any images any more. Which kinda sucks.
I'm gonna try flashing the stock kernel and trying again.
Hello,
I have the same problem with Tiamat 2.2.1.
Have you resolved the problem? I don't know what else to do :-\
Hello, i recently bought an asus transformer and ive rooted it and installed a custom rom well today i had problems with it bootlooping into recovery well i fixed that now for some reason my wifi wont turn on it just says turning on wifi and doesnt do anything so what im wanting to do is fastory restore and unroot the device so i can start fresh can anyone point me into the right direction to do so? Thanks.
-Brad
You can Nvflash a stock ROM, but Guevor's kernel will also fix your wifi issues. Don't use ROM manager, it causes bootloops. Also try a different ROM (which did you flash), and you must get the CM9/AOKP based kernel to get wifi to work on an AOSP ROM. (See megatron version in guevor's thread)
I've searched and searched throughout for a problem related exactly to mine and haven't been able to come up with much. Here goes: I flashed revolver 4 then flashed guevers kernel for OC capability since revolver parts is no longer working. Tablet works great and is super fast. However, I connected it to my PC for the first time since the flash to transfer some files and windows automatically searched for drivers. It picked up some acer abd driver automatically then automatically opened droid explorer (I probably downloaded this at some point). Also, the tablet will automatically check abd mode, without being prompted, when the usb is connected no matter how many times I uncheck it.
So I uninstalled droid explorer and uninstalled the acer abd driver and tried it again with the same result. I downloaded asus suite with the drivers to no avail. The PC will not take the asus drivers as the correct ones. It keeps searching out this acer abd driver. Now I'm thinking this problem is related to the kernel.
Any ideas whats going on here?
I'd start by either testing on another computer, or testing on the same computer with a different OS, like a Ubuntu LiveCD or something alike. If it works in linux then it's almost definitely a driver issue. If it still doesn't, I'd suspect the cable. Even if it charges, it may have issues with data. Try another USB port (from another controller if possible) on the computer also... you never know.
If it's caused or not by the kernel/rom I can't help there, never used those.
Today, I tried a different computer and it does the same thing. I flashed another kernel with no difference. I'm thinking it has to be the ROM. Tried to flash CM9 but it failed to flash for some reason. Still looking for suggestions on troubleshooting as I'm already way beyond my knowledge level at this point.
It was definitely something that had to do with revolver. Flashed revolution and am getting closer to resolution. Now I can connect with asus sync but my computer still doesn't see it in windows explorer. I've got the stock asus ROM and kernel. I may have to go back to completely stock as much as I hate to do it. I'm still open to suggestions though.
dieselfiend said:
It was definitely something that had to do with revolver. Flashed revolution and am getting closer to resolution. Now I can connect with asus sync but my computer still doesn't see it in windows explorer. I've got the stock asus ROM and kernel. I may have to go back to completely stock as much as I hate to do it. I'm still open to suggestions though.
Click to expand...
Click to collapse
Aren't revolver and revolution old ICS roms ?
Try a new JellyBean one, TeamEOS4 nightly combined with KatKernel works amazingly
ROM (Jellybean 4.2.2)
http://goo.im/devs/teameos/roms/eos4/nightlies/tf101/EOS-tf101-20130420-109.zip
KatKernel
http://downloads.timduru.org/android/tf101/K.A.T/kernel/Tim_KatKernel_103_JB4.2_Lidpatch.zip
Gapps
http://goo.im/devs/teameos/roms/eos4/gapps/gapps_4.2.2_TF101_20130323b.zip
Tips - Wipe SYSTEM, CACHE and DALVIK CACHE before flashing anything
Wipe Cache and Dalvik Cache between each zip you flash and after flashing everything.
Thanks. I will try teameos 4 and see what happens. I knew my others were older but hey still seemed really popular. I have been trying to stay away from JB until Asus officially releases it.
Sent from my GT-I9100 using Tapatalk 2
dieselfiend said:
I have been trying to stay away from JB until Asus officially releases it.
Click to expand...
Click to collapse
They won't, TF101 is dead to them now, Custom is our way to stay updated now, not that it's a bad thing, ASUS stock ROMs were terrible
Hi all,
I was given the TF700 by my grandma as she no longer used it and I've been trying to solve the issue of it being so sluggish etc, so I've managed to unlock the bootloader, flash a custom ROM however, since I tried to flash the KatKiss ROM, the WiFi refuses to work. Every ROM after that has had no WiFi either. I tried to flash back to stock, as was suggested to see if that would fix the WiFi issues, to see if that would help, however now it won't boot past the boot animation - no matter what ROM I try and use.
I'm refusing to give up on this guy as it has the potential to be an amazing tablet... Y'know, when I can actually get it to turn on.
I've checked and I'm on the latest bootloader (US_epad-10.6.1.14.10-20130601 - I'm hoping that's right?)
Does anybody have any suggestions? I can successfully boot into Kang TWRP and flash things via recovery, but I can't get any ROM to boot past the boot-animation. I don't want to get rid of the tablet, but I'm unsure of what to try next. As I can still get it powered on and into bootloader/TWRP, I figure there has to be some kind of hope. Have I missed off any details that may be needed?
If anyone could help me out, I'd be eternally grateful!
reterosexual said:
Hi all,
I was given the TF700 by my grandma as she no longer used it and I've been trying to solve the issue of it being so sluggish etc, so I've managed to unlock the bootloader, flash a custom ROM however, since I tried to flash the KatKiss ROM, the WiFi refuses to work. Every ROM after that has had no WiFi either. I tried to flash back to stock, as was suggested to see if that would fix the WiFi issues, to see if that would help, however now it won't boot past the boot animation - no matter what ROM I try and use.
I'm refusing to give up on this guy as it has the potential to be an amazing tablet... Y'know, when I can actually get it to turn on.
I've checked and I'm on the latest bootloader (US_epad-10.6.1.14.10-20130601 - I'm hoping that's right?)
Does anybody have any suggestions? I can successfully boot into Kang TWRP and flash things via recovery, but I can't get any ROM to boot past the boot-animation. I don't want to get rid of the tablet, but I'm unsure of what to try next. As I can still get it powered on and into bootloader/TWRP, I figure there has to be some kind of hope. Have I missed off any details that may be needed?
If anyone could help me out, I'd be eternally grateful!
Click to expand...
Click to collapse
It sounds as if you are not formatting properly between flashing roms.
Try that first: Wipe > Format data > type yes
let it finish, the process takes a good hour. Then convert /data to f2fs
https://forum.xda-developers.com/tr.../guide-convert-data-to-f2fs-twrp-2-8-t3073471
Flash the rom and gapps.
I bet it'll boot this time
berndblb said:
It sounds as if you are not formatting properly between flashing roms.
Try that first: Wipe > Format data > type yes
let it finish, the process takes a good hour. Then convert /data to f2fs
https://forum.xda-developers.com/tr.../guide-convert-data-to-f2fs-twrp-2-8-t3073471
Flash the rom and gapps.
I bet it'll boot this time
Click to expand...
Click to collapse
Thank you so much! I'd been formatting but maybe not properly.
I'll give it a go once it has some charge in it - it's been trying to boot for about 7 or so hours now. I'll report back with anything if it helps.
So, I've managed to get the tablet to boot - but I'm still stuck with no working WiFi. It just greys out and says disabled. Bluetooth seems to work, but, I can't even connect to my phone to use it's data connection via Bluetooth tethering. I managed to get it to boot on KatKiss 7.1 - any ideas on the WiFi issue? Is there a flashable zip to fix WiFi drivers?
reterosexual said:
So, I've managed to get the tablet to boot - but I'm still stuck with no working WiFi. It just greys out and says disabled. Bluetooth seems to work, but, I can't even connect to my phone to use it's data connection via Bluetooth tethering. I managed to get it to boot on KatKiss 7.1 - any ideas on the WiFi issue? Is there a flashable zip to fix WiFi drivers?
Click to expand...
Click to collapse
Nope, the rom should have everything you need. Don't know man - this is pretty unusual. You probably should flash it back to stock to have a point of reference.
If wifi still won't work on stock it's gotta be hardware.
Flash the stock blob in fastboot and then start from scratch:
https://forum.xda-developers.com/showpost.php?p=72801448&postcount=8
berndblb said:
Nope, the rom should have everything you need. Don't know man - this is pretty unusual. You probably should flash it back to stock to have a point of reference.
If wifi still won't work on stock it's gotta be hardware.
Flash the stock blob in fastboot and then start from scratch:
https://forum.xda-developers.com/showpost.php?p=72801448&postcount=8
Click to expand...
Click to collapse
Thanks for the link, but the official ASUS link in the post you've linked to is dead :/ I'll have a look after work tonight and see if I can find it anywhere else and whether I can get it working or not!
https://www.asus.com/us/supportonly/ASUS Transformer Pad Infinity TF700T/HelpDesk_BIOS/
I tried all of the above steps and re-flashed KatKiss to find that the WiFi still did not want to work, which resulted in not being able to get past the setup wizard. I'm not sure what to try next, but at least it was worth a shot. Thank you for your help!
Well - did wifi work on stock?
You know about this bug right? From the OP:
Note that current gapps setup wizard will crash as it is not fully compatible with android 7.1.2 (KatKiss >= 022)
unless you turn on wifi manually after the language selection in the initial setup.
(if you don't have a dock, use the extra wifi button in the navbar)
berndblb said:
Well - did wifi work on stock?
You know about this bug right? From the OP:
Note that current gapps setup wizard will crash as it is not fully compatible with android 7.1.2 (KatKiss >= 022)
unless you turn on wifi manually after the language selection in the initial setup.
(if you don't have a dock, use the extra wifi button in the navbar)
Click to expand...
Click to collapse
Just seen this! Yeah, the WiFi worked fine on stock, but any custom ROM I tried had the same issue, so I'm not 100% sure what caused it. I sold the tab on after flashing it back to stock, though.
Thank you for your help though!