[stock][Rom] S5630DXLA1 3file flashing odin! - Galaxy Y GT-S5360 Android Development

-S5630DXLA1_OLBLA1-nhokonline2010
http://www.mediafire.com/?9hisyjl1ksqc0tx
-S5360DXLA1_XXVKL1-nhokonline2010
http://www.mediafire.com/?smcspsh2cdhyddk
Pass: Mysamsung.vn
Flashing for odin!!!

are these eur? Indian?

this is already in this forum...it frst made by Doky

Indian Rom
Download Indian Rom
S5360DDLA1 India
S5360XXLA2 Greece(EUR)
__________________________________________
Don'T Forget To Say Thank,If You Like My Post.

sireangelus said:
are these eur? Indian?
Click to expand...
Click to collapse
No this is not from samsung company from mild, non-party mod at all? always pronouncing the

vietnamese ROM with wrong password given.
contains vietnamese non-localized bloatware. not to good for english speakers.
S5630DXLA1_OLBLA1: ROM India
S5360DXLA1_XXVKL1: ROM Vietnam
2.3.6 Ginger
Kernel version 2.6.35.7
The firmware build S5360DXLA1 is an official firmware update released by Samsung via Kies server across Asian Countries. This version has been build or modified as of January 16th 2012, first released this year over South Asian Region. India already receives a few days ago with firmware build S5360DDLA1. This will add the Galaxy Y more improvements, enhancements and a greater user experience of Android Gingerbread.
expect a log like:
<ID:0/009> Added!!
<ID:1/013> Added!!
<ID:1/013> Removed!!
<ID:0/009> Removed!!
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> DefaultCalDataWithBoot_S5360DXLA1_REV05.tar.md5 is valid.
<OSM> PDA_S5360DXLA1_REV05.tar.md5 is valid.
<OSM> MODEM_S5360DXLA1_REV05.tar.md5 is valid.
<OSM> GT-S5360-CSC-XXVKL1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Set PIT file..
<ID:0/015> DO NOT TURN OFF TARGET!!
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> BcmBoot.img
<ID:0/015> HEDGE_NVRAM8_RF_LE.bin
<ID:0/015> sysparm_dep.img
<ID:0/015> Sbl.bin
<ID:0/015> boot.img
<ID:0/015> system.img
<ID:0/015> userdata.img
<ID:0/015> param.lfs
<ID:0/015> BcmCP.img
<ID:0/015> Transmission Complete..
<ID:0/015> Now Writing.. Please wait about 2 minutes
<ID:0/015> Receive Response form LOKE
<ID:0/015> csc.rfs
<ID:0/015> RQT_CLOSE !!
<ID:0/015> RES OK !!
<ID:0/015> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/015> Removed!!
<ID:0/009> Added!!
<ID:1/013> Added!!

S5360XXLA2 Greece
using odin and Flashing with Only Single file ( S5360XXXXX_S5360XXXXX_S5360XXXXX_HOME.tar.md5 ) , update failed.
Any help ?

no flashing ......????????

See the photo below Try to flash with a single file ( Greece LA2 )

kosmasgr said:
using odin and Flashing with Only Single file ( S5360XXXXX_S5360XXXXX_S5360XXXXX_HOME.tar.md5 ) , update failed.
Any help ?
Click to expand...
Click to collapse
nhokonline2010 said:
no flashing ......????????
Click to expand...
Click to collapse
kosmasgr said:
See the photo below Try to flash with a single file ( Greece LA2 )
Click to expand...
Click to collapse
Solution is here!

mai77 said:
vietnamese ROM with wrong password given.
contains vietnamese non-localized bloatware. not to good for english speakers.
S5630DXLA1_OLBLA1: ROM India
S5360DXLA1_XXVKL1: ROM Vietnam
2.3.6 Ginger
Kernel version 2.6.35.7
The firmware build S5360DXLA1 is an official firmware update released by Samsung via Kies server across Asian Countries. This version has been build or modified as of January 16th 2012, first released this year over South Asian Region. India already receives a few days ago with firmware build S5360DDLA1. This will add the Galaxy Y more improvements, enhancements and a greater user experience of Android Gingerbread.
expect a log like:
<ID:0/009> Added!!
<ID:1/013> Added!!
<ID:1/013> Removed!!
<ID:0/009> Removed!!
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> DefaultCalDataWithBoot_S5360DXLA1_REV05.tar.md5 is valid.
<OSM> PDA_S5360DXLA1_REV05.tar.md5 is valid.
<OSM> MODEM_S5360DXLA1_REV05.tar.md5 is valid.
<OSM> GT-S5360-CSC-XXVKL1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Set PIT file..
<ID:0/015> DO NOT TURN OFF TARGET!!
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> BcmBoot.img
<ID:0/015> HEDGE_NVRAM8_RF_LE.bin
<ID:0/015> sysparm_dep.img
<ID:0/015> Sbl.bin
<ID:0/015> boot.img
<ID:0/015> system.img
<ID:0/015> userdata.img
<ID:0/015> param.lfs
<ID:0/015> BcmCP.img
<ID:0/015> Transmission Complete..
<ID:0/015> Now Writing.. Please wait about 2 minutes
<ID:0/015> Receive Response form LOKE
<ID:0/015> csc.rfs
<ID:0/015> RQT_CLOSE !!
<ID:0/015> RES OK !!
<ID:0/015> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/015> Removed!!
<ID:0/009> Added!!
<ID:1/013> Added!!
Click to expand...
Click to collapse
pass: mysamsung.vn is ok (not Mysamsung.vn)

Related

[Completed] Note 4 N910C. Not rooting

Hello Guyz... Im new here.. And this is my first thread.. I have a note 4 N910c which rooting at all.. I have used Odin and even Kingo root.. but no lock.. It fails in both..
ODIN: <ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-trelte-treltexx-smn910c.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
THIS IS WHAT I GET.
Abubakar bhai said:
Hello Guyz... Im new here.. And this is my first thread.. I have a note 4 N910c which rooting at all.. I have used Odin and even Kingo root.. but no lock.. It fails in both..
ODIN: <ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-trelte-treltexx-smn910c.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
THIS IS WHAT I GET.
Click to expand...
Click to collapse
Hi. Thanks for visiting the XDA Assist forums.
Follow this link to help you root your phone: http://forum.xda-developers.com/note-4/development/root-note-4-sm-n910c-t2977948
Best of luck.
enigmaamit said:
Hi. Thanks for visiting the XDA Assist forums.
Follow this link to help you root your phone: http://forum.xda-developers.com/note-4/development/root-note-4-sm-n910c-t2977948
Best of luck.
Click to expand...
Click to collapse
Still the Same error
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-trelte-treltexx-smn910c.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
I have SECURE DOWNLOAD ENABLED. never seen that before.

Can't Flash Stock ROM - G920F

Been trying to flash Gaakxy s6 back to stock for hours. I get this message in ODIN
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU2POFC_G920FVFG2BOF2_G920FXXU2POFC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin engine v(ID:3.1005)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> SingleDownload.
<ID:0/013> sboot.bin
<ID:0/013> NAND Write Start!!
<ID:0/013> cm.bin
<ID:0/013> boot.img
<ID:0/013> recovery.img
<ID:0/013> system.img
<ID:0/013> modem.bin
<ID:0/013> cache.img
<ID:0/013> hidden.img
<ID:0/013> FAIL!
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Do i need to flash pit to the phone?
Any help is much appreciated
Try redownloading the ROM from yor source website and flash.
roydok said:
Try redownloading the ROM from yor source website and flash.
Click to expand...
Click to collapse
I found a solution, but I cant seem to get one part of it to work -.-
Read to extract the recovery.img and to change the file to recovery.img.tar. However the file type wont change
after extracting the hidden.img and changing it to hidden.img.tar (finally got it to work)
It says the odin communicator has stopped working..
Anyone have any suggestions?

Odin Flashing ERROR

Hi, I currently using Samsung Galaxy Tab 2 P3100 but my tab stuck in endless boot. I try flashing any firmware version but didn't solve anything, try flashing any version of firmware but the process fail in middle flash of system.
ODIN MODE
PRODUCT NAME : GT-P3100
CUSTOM BINARY DOWNLOAD : NO
CURRENT BINARY : SAMSUNG_OFFICIAL
Downloading. . .
Do not turn off target !!
Click to expand...
Click to collapse
Code:
Odin v3.07
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P3100XWBLJ1_P3100OJVBLJ1_P3100XXLH2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Set PIT file..
<ID:0/015> DO NOT TURN OFF TARGET!!
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> system.img
<ID:0/015> NAND Write Start!!
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/015> Removed!!
PIT : signed_espresso_20120220_16G.pit
ROM : P3100XWBLJ1_P3100OJVBLJ1_P3100XXLH2_HOME.tar.md5
Click to expand...
Click to collapse
can anyone help me, please. . .

Samsung Note (GT-N8000) broken?

When I turn on my tablet, block on "Samsung".
I tried to flash the ROM's stock 4.1.2, 4.1.2 rom Tim and the stock rom 4.4.2
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> tz.img
Click to expand...
Click to collapse
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
Click to expand...
Click to collapse
Shortly after, goes in error
Then I tried to install the CWM
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> __XmitData_Write
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Click to expand...
Click to collapse
What can be the reason?
Try a different download.
http://forum.xda-developers.com/showthread.php?t=2699840
JJEgan said:
Try a different download.
http://forum.xda-developers.com/showthread.php?t=2699840
Click to expand...
Click to collapse
Hi
how do I move the post in the correct section?
I tried to download 3 files from SamMobile. And all give me the same error.
Android 4.4.2 Stock
N8000XXUDOF1_N8000ITVDOF1_ITV
Android 4.1.2 Stock
N8000XXCMJ2_N8000ITVCMJ3_ITV
Android 4.1.2 TIM
N8000XXCMG3_N8000TIMCMG2_TIM
How can I solve this problem?

How to upadate Nougat to the latest version???

Hello,
i have the DPLT nougat firmware and I want to update to the latest one. The only option is using Odin? Can I do it thru zip file?
I have twrp. Will I nee to put it again, and root, and clean the data partition and everything...?
Thanks
dari-woka said:
Hello,
i have the DPLT nougat firmware and I want to update to the latest one. The only option is using Odin? Can I do it thru zip file?
I have twrp. Will I nee to put it again, and root, and clean the data partition and everything...?
Thanks
Click to expand...
Click to collapse
Check for OTA update first from settings menu If that does not work, flash "HOME_CSC" from the new firmware via Odin and your data should not be affected.
mrd0pe said:
Check for OTA update first from settings menu If that does not work, flash "HOME_CSC" from the new firmware via Odin and your data should not be affected.
Click to expand...
Click to collapse
thanks for the answer, but it does not update the system when I check it on the phone
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1203)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> cache.img
<ID:0/008> hidden.img
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Removed!!
<ID:0/008> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
dari-woka said:
thanks for the answer, but it does not update the system when I check it on the phone
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1203)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> cache.img
<ID:0/008> hidden.img
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Removed!!
<ID:0/008> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
My bad, I guess i wrote that reply a little too fast.. It's the AP file you should flash.

Categories

Resources