hey there, i've been reading through some treads, i downloaded multi file which included all the files i needed to fix my phone. now when i go to ODIN my com doesn't recognize anything plugged in. how do i get odin to recognize my phone? also when i hit the PIT and PDA buttons and click on the approprate files, nothing come up in the block next to PIT or PDA. help me!
make sure the files are full first and 0kb files that were improperly downloaded
and make sure download mode, proper drivers ect...
Hello! Before you tell me to search the forum for it, I just spent the last 30 minutes searching through and found nothing. Everything I found either had broken links or they were forcing me to download a file downloader program like ilivid or whatever. I shouldn't have to download these file managers that corrupt my computer to get one file. Does anyone have a straight-up download where I can get a stock file for this phone? Thanks ahead of time.
Use the Heimdall One-Click. Read the guide in the second link of my signature.
I tried rooting my GS2Plus running 4.2.2. I first thought of odin and found videos and tutorials on how to do it. but when setting odin up and selecting PDA or AP (I have tried 3 versions) odin won't read the tar file in the folder. I'm running it as an admin but it just won't find it so I haven't managed to get to the rooting stage. I have attached snaps so you can see what happens and maybe help me. I tried renaming the file and created 3 copies in case it read at least one but it doesnt.
I also tried using Kingo but it seems to be working and then it just does nothing.
kostas90 said:
I tried rooting my GS2Plus running 4.2.2. I first thought of odin and found videos and tutorials on how to do it. but when setting odin up and selecting PDA or AP (I have tried 3 versions) odin won't read the tar file in the folder. I'm running it as an admin but it just won't find it so I haven't managed to get to the rooting stage. I have attached snaps so you can see what happens and maybe help me. I tried renaming the file and created 3 copies in case it read at least one but it doesnt.
I also tried using Kingo but it seems to be working and then it just does nothing.
Click to expand...
Click to collapse
Try to place the .tar file in the root folder C:\ of your computer
With much embarrassment I have to admit I really thought I was smarter than a tablet and a few simple clicks. Apparently not. So now I am here with issues that I am sure someone can answer because your more advanced than a few clicks and a tablet.
I have briefly looked for a resolve to my issue but it is very overwhelming. So if you can just point me in the right direction and hold my hand at the same time I would be very appreciative :good:
Issues:
I originally downloaded Odin, GT-P5113 4.0.4, CM 12.1, CW Unofficial Touch 6.0.3.3 p5100 zip. I launced Odin and followed the steps from a you-tube video. Well upon my surprise CW was not on the tablet so I was at the Tabs generic recovery screen. I choose the option to delete all user data ( lots of no's to select from and one Yes). Well continuing to be a fool I completed this process. When the tablet rebooted I was stuck at the Samsung logo screen. I decided to get to the download screen and install smt810_cf_autoroot.tar. After loading this tar via Odin I became stuck on the Android man downloading screen. Waited a bit and nothing. Then my tablet shut down and came up with "Firmware upgrade encountered and issue" with the tablet-yellow ! icon and pc icon.
Another issue is when i download these files Odin will not find them in my file. Why? I usually keep them unzipped as a .rar in order for odin to show them so I can select PDA and attempt to install them.
Is there a way to still upgrade the Android system and fix this Firmware error at the same time?
Basically I am so new to this I need specific directions on resolving my issue. So if anyone has a moment please help me out here. I appreciate your time and knowledge
And I can use Odin to install to the tablet. If that helps Just not in the download screen on the tablet.
Learning76 said:
And I can use Odin to install to the tablet. If that helps Just not in the download screen on the tablet.
Click to expand...
Click to collapse
first you should download the stock firmware of your device, if it's p5113 then search and download the same firmware.
http://forum.xda-developers.com/showthread.php?t=2203309 check this thread if it's there, if it's not please google it, if already have it, ignore..
Once you have it, you should get the firmware md5 file (by unzipping the rar.) Odin will take tar file or md5 file. put it in Odin AP/PDA check the thread for all the details on how to flash correctly.
you have to get into download mode by pressing the power and volume up/right to do that once the firmware is successfully flashed and your tab starts running again. first get this part done.
Always use files that are meant only for your device. if your tab say p5113. then make sure the file you are flashing states it is meant for p5113 and not p5100. (maybe not in the rooting case cause it's same
http://forum.xda-developers.com/showthread.php?t=2203309 here for all)
At some places you will find files marked as p51xx. those files are generally safe too and are meant for the p51xx tab series but that is later stage.
I appreciate the feedback and have found I had tried to flash my tablet with GT-P5110 software when i actually have a GT-P5113TS. I have found the firmware but my issue is when I download anything and extract it with using rar. I never get a .tar file or anything Odin can not recognize to select PDA and use.. What would cause that? How do I fix this?
Thank You
Learning76 said:
I appreciate the feedback and have found I had tried to flash my tablet with GT-P5110 software when i actually have a GT-P5113TS. I have found the firmware but my issue is when I download anything and extract it with using rar. I never get a .tar file or anything Odin can not recognize to select PDA and use.. What would cause that? How do I fix this?
Thank You
Click to expand...
Click to collapse
Try winrar or 7zip, it should extract, you need md5 or tar format in pda section. If not what error are you getting? There must be some file when you open the archive?
Basically when I download the zip file I want and then extract it to a specific folder. All I after unzipping is File folders with other file folders inside,Img, File, PROP, and SH. I never extract anything that is a Tar file or anything Odin can recognize when on PDA within Odin. Plus a lot of times I click on a link for a download off this site and it sends me to some watch-movies website. Not a actual download. Or I am just missing it.
Learning76 said:
Basically when I download the zip file I want and then extract it to a specific folder. All I after unzipping is File folders with other file folders inside,Img, File, PROP, and SH. I never extract anything that is a Tar file or anything Odin can recognize when on PDA within Odin. Plus a lot of times I click on a link for a download off this site and it sends me to some watch-movies website. Not a actual download. Or I am just missing it.
Click to expand...
Click to collapse
Maybe it's a bad link to your stock file then. Perhaps someone can give proper file link to the stock firmware. Inside the zip it's basically a md5 file for firmware to flash. Sadly I don't have a proper yoi will have to find of the net.
Hi guys
I wonder could anyone help me. I'm trying to flash a stock ROM on my s6 with ODIN. It goes so far and then fails on hidden.img I've researched it and the solution found here seems to have worked for most people. My problem is i cant get Odin to recognise the hidden.img.tar file - it just cant see it. I've tried all sorts of ways and i rename it as described and odin just wont recognise it in the right format. Please can someone help me? Just for the record what i do is:
The main image file i open with winrar. I get 8 files. i select the hidden.img file and extract and rename it as per the article. Odin i then select ap and point it at the location and it just wont find it. Odin 3.10.7 and windows 7 and windows 10
https://www.reddit.com/r/GalaxyS6/comments/35zshn/howto_fix_a_failed_odin_flash_softbrick_hiddenimg/
corkie1 said:
Hi guys
I wonder could anyone help me. I'm trying to flash a stock ROM on my s6 with ODIN. It goes so far and then fails on hidden.img I've researched it and the solution found here seems to have worked for most people. My problem is i cant get Odin to recognise the hidden.img.tar file - it just cant see it. I've tried all sorts of ways and i rename it as described and odin just wont recognise it in the right format. Please can someone help me? Just for the record what i do is:
The main image file i open with winrar. I get 8 files. i select the hidden.img file and extract and rename it as per the article. Odin i then select ap and point it at the location and it just wont find it. Odin 3.10.7 and windows 7 and windows 10
https://www.reddit.com/r/GalaxyS6/comments/35zshn/howto_fix_a_failed_odin_flash_softbrick_hiddenimg/
Click to expand...
Click to collapse
no need unrar that file... just flash that main image file at PDA section... that all... it should boot up like charm... ???
graphbyte said:
no need unrar that file... just flash that main image file at PDA section... that all... it should boot up like charm...
Click to expand...
Click to collapse
But i need to seperately flash the hidden image file thats the problem
corkie1 said:
But i need to seperately flash the hidden image file thats the problem
Click to expand...
Click to collapse
Can anyone help at all guys - im stuck without the phone