hey there, i've been reading through some treads, i downloaded multi file which included all the files i needed to fix my phone. now when i go to ODIN my com doesn't recognize anything plugged in. how do i get odin to recognize my phone? also when i hit the PIT and PDA buttons and click on the approprate files, nothing come up in the block next to PIT or PDA. help me!
make sure the files are full first and 0kb files that were improperly downloaded
and make sure download mode, proper drivers ect...
Related
Samsung Mesmerize; SCH-i500; Rooted stock 2.3.4 Gingerbread with Busybox!
I really don't know how I got to this point, I've flashed w/ Odin so many times now, that I have no idea if the above is still where I'm at but here goes the problem:
I turn on my phone and it doesn't even show the Samsung logo, just goes directly to the Samsung Recovery Utils with #MANUAL MODE# displayed at the bottom of the screen.
"reboot system now"
again, reboots into the same recovery mode (Samsung...)
"apply sdcard:update.zip"(after returning to the main screen):
--Install from sdcard...
Finding update package...
Opening update package...
Verifying update package...
E:failed to open /sdcard/update.zip (No such file or directory)
E:signature verification failed
Installation aborted
"wipe data/factory reset":
E:Can't mount /dev/block/mmcblk0p3
(Invalid arguement)
E:install_application_for_customer:Can't mount HIDDENSDCARD:
your storage not prepared yet. please use UI menu for format and reboot actions.
"wipe cache partition": works fine though
I know this has been asked before but I haven't found any other posts about the Samsung Mesmerize SCH i500 & I'm not sure if this is model specific & don't really want to take my chances, sorry.
Ok, update: I just used Odin to reflash to rooted 2.3.4 & it still goes to recovery mode (Samsung) & all the options are the same (w/ the same results) as above, I can't get my sdcard to show on my computer to manually apply the update, unless there is a way I don't know of, the only way I know requires me to be on the phone's Main Menu & use the notification drop-down menu to activate transfer mode on my computer, what am I missing?
Now I used Odin again, this time to put ClockworkMod Recovery v4.0.1.0 on it & now it booted up in CwM Recovery mode but I still get the same error when trying to apply the update (see above)
Trying to "- mount USB storage":
E:Unable to open ums lunfile (No such file or directory)
I just want to format the whole thing, phone & sdcard, & start over from scratch as though I had just bought the phone.
Ok, for future reference, if anyone has a problem like this, unless you find another solution, this is what I did:
I downloaded a rooted stock 2.2 Froyo, ran Odin & just put the SCH-I500_USCC_EA11_REL_ROOT.tar.md5 in the PDA part & flashed it, it went to the recovery screen again at boot up but, after selecting Reboot it went right to the phone splash screen, so, I guess I'm back in business but I haven't tested anything yet, I'll update this post to keep you all in the loop, wish me luck.
It would seem that I can get wifi but I don't have a carrier or 3G, as far as I can tell, its become no more than an iPod Tough (just having wifi access) I can, however, now access the sdcard, when I plug the USB cablein it asks if I want Samsung Kies or Mass storage.
I don't know
Download and unzip the linked file. Place the tar file in the PDA slot and the pit file in the PIT slot. Make sure repartition is checked and the flash. This should get the phone booting again.
http://db.tt/fOG2Lf6
Once this is done download and unzip the linked file. Do the exact same thing. Place the tar file in PDA and the pit file in PIT. Make sure repartition is NOT checked and flash. This should have you booting into EH09 without issue.
http://db.tt/hls4IuhW
scarmon25 said:
Download and unzip the linked file. Place the tar file in the PDA slot and the pit file in the PIT slot. Make sure repartition is checked and the flash. This should get the phone booting again.
http://db.tt/fOG2Lf6
Once this is done download and unzip the linked file. Do the exact same thing. Place the tar file in PDA and the pit file in PIT. Make sure repartition is NOT checked and flash. This should have you booting into EH09 without issue.
http://db.tt/hls4IuhW
Click to expand...
Click to collapse
Worked great, thank u very much, started off w/ the signal bars at full but wouldn't make any outgoing calls or send any messages but I could receive messages (text), every time I tried to make a call it kept giving me a recording, something about "To make a collect call please enter the are code and phone number of the person you are trying to call...." so I type the number & it responds w/ something "....the number you are trying to call cannot be billed..." "...to make a phone call w/ a pre-paid card or a credit card..." so I just entered the US Cellular activation # & I was back in business!
ok so after this!
After i do this (Hopefully it works) then could i use ODIN to flash the pre rooted 2.3 rom? or not?
Once done with those instructions you will be on EH09. Odin a recovery and flash the below linked file. It will root it for you.
http://db.tt/QtScf9AW
scarmon25 said:
Download and unzip the linked file. Place the tar file in the PDA slot and the pit file in the PIT slot. Make sure repartition is checked and the flash. This should get the phone booting again.
Once this is done download and unzip the linked file. Do the exact same thing. Place the tar file in PDA and the pit file in PIT. Make sure repartition is NOT checked and flash. This should have you booting into EH09 without issue.
Click to expand...
Click to collapse
Any chance you could relink those? I'm in the exact same boat.
Is there anyway I can get those links? When I click them it say's they're expired or something...
scarmon25 said:
Download and unzip the linked file. Place the tar file in the PDA slot and the pit file in the PIT slot. Make sure repartition is checked and the flash. This should get the phone booting again.
http://db.tt/fOG2Lf6
Once this is done download and unzip the linked file. Do the exact same thing. Place the tar file in PDA and the pit file in PIT. Make sure repartition is NOT checked and flash. This should have you booting into EH09 without issue.
http://db.tt/hls4IuhW
Click to expand...
Click to collapse
Does anyone know what these two files referenced actually are?
Blahhh
I really needed those files.
Woolvz said:
I really needed those files.
Click to expand...
Click to collapse
Check rootzwiki, there's no development going on here.
Sent from my SCH-I500 using xda premium
after upgrading to GB, there was a problem with the dialer. Sometimes when I try to call at a tap of three digits, it just closes and throws me to the desktop.
This happens few times a day, is treated only reset the device
If anyone ever encountered such a problem, tell me is there any solution?
download this
courtesy of RaverX3X
WINDOWS INSTRUCTIONS(Mac will follow)
then
download and extract this
keep contents in a folder.
Now extract the "original" file that you downloaded.
You will find a ".tar.md5" within the rar.
go here
you will find a windows driver for your phone depending on 32 or 64 bit. It says "vibrant", but they work, so install them.
Open ODIN and connect your phone to download mode.
(turn off phone, hold volume buttons, plug in computer connected usb cable while holding buttons)
put the .tar.md5 into the "PDA" section of ODIN.
Don't worry about any other options and checkboxes, and flash it.
(you may lose data)
______________________________________
Mac instructions
You need at least tiger(10.4.x or higher). lion(10.7.x) will also work
extract the file you just downloaded (ROM).
You will find a .tar.md5 file.
Rename it to .tar(remove .md5)
extract it.
Find "factoryfs.rfs"
Keep that file in mind!
now
download "Heimdall" link
copy the app into your applications folder and open it.
turn off your phone, connect usb to computer, hold volume buttons and connect your phone.
You will now be in download mode.
Go to the "utilities" sections and download the pit file.
name it as pit.pit and put it on your desktop.
Your phone may reboot.
Just press the volume buttons to stay in download mode.
Go to the "flash" section
1. put "pit.pit" in the pit section.
2. now, under partition files, click "add".
3. under partition name, chose factoryfs.
5. Remember the factoryfs.rfs I told you to keep, well browse for that.
6. Flash away!!
(you "WON'T" Lose DATA!!!!)
___________________________
EITHER WAY YOUR PHONE IS NOW FIXED!
Does this also work on galaxy s i9000?
g0gY said:
Does this also work on galaxy s i9000?
Click to expand...
Click to collapse
I doubt it the files are for the sgs4g. The process might work if you have the proper files.
With much embarrassment I have to admit I really thought I was smarter than a tablet and a few simple clicks. Apparently not. So now I am here with issues that I am sure someone can answer because your more advanced than a few clicks and a tablet.
I have briefly looked for a resolve to my issue but it is very overwhelming. So if you can just point me in the right direction and hold my hand at the same time I would be very appreciative :good:
Issues:
I originally downloaded Odin, GT-P5113 4.0.4, CM 12.1, CW Unofficial Touch 6.0.3.3 p5100 zip. I launced Odin and followed the steps from a you-tube video. Well upon my surprise CW was not on the tablet so I was at the Tabs generic recovery screen. I choose the option to delete all user data ( lots of no's to select from and one Yes). Well continuing to be a fool I completed this process. When the tablet rebooted I was stuck at the Samsung logo screen. I decided to get to the download screen and install smt810_cf_autoroot.tar. After loading this tar via Odin I became stuck on the Android man downloading screen. Waited a bit and nothing. Then my tablet shut down and came up with "Firmware upgrade encountered and issue" with the tablet-yellow ! icon and pc icon.
Another issue is when i download these files Odin will not find them in my file. Why? I usually keep them unzipped as a .rar in order for odin to show them so I can select PDA and attempt to install them.
Is there a way to still upgrade the Android system and fix this Firmware error at the same time?
Basically I am so new to this I need specific directions on resolving my issue. So if anyone has a moment please help me out here. I appreciate your time and knowledge
And I can use Odin to install to the tablet. If that helps Just not in the download screen on the tablet.
Learning76 said:
And I can use Odin to install to the tablet. If that helps Just not in the download screen on the tablet.
Click to expand...
Click to collapse
first you should download the stock firmware of your device, if it's p5113 then search and download the same firmware.
http://forum.xda-developers.com/showthread.php?t=2203309 check this thread if it's there, if it's not please google it, if already have it, ignore..
Once you have it, you should get the firmware md5 file (by unzipping the rar.) Odin will take tar file or md5 file. put it in Odin AP/PDA check the thread for all the details on how to flash correctly.
you have to get into download mode by pressing the power and volume up/right to do that once the firmware is successfully flashed and your tab starts running again. first get this part done.
Always use files that are meant only for your device. if your tab say p5113. then make sure the file you are flashing states it is meant for p5113 and not p5100. (maybe not in the rooting case cause it's same
http://forum.xda-developers.com/showthread.php?t=2203309 here for all)
At some places you will find files marked as p51xx. those files are generally safe too and are meant for the p51xx tab series but that is later stage.
I appreciate the feedback and have found I had tried to flash my tablet with GT-P5110 software when i actually have a GT-P5113TS. I have found the firmware but my issue is when I download anything and extract it with using rar. I never get a .tar file or anything Odin can not recognize to select PDA and use.. What would cause that? How do I fix this?
Thank You
Learning76 said:
I appreciate the feedback and have found I had tried to flash my tablet with GT-P5110 software when i actually have a GT-P5113TS. I have found the firmware but my issue is when I download anything and extract it with using rar. I never get a .tar file or anything Odin can not recognize to select PDA and use.. What would cause that? How do I fix this?
Thank You
Click to expand...
Click to collapse
Try winrar or 7zip, it should extract, you need md5 or tar format in pda section. If not what error are you getting? There must be some file when you open the archive?
Basically when I download the zip file I want and then extract it to a specific folder. All I after unzipping is File folders with other file folders inside,Img, File, PROP, and SH. I never extract anything that is a Tar file or anything Odin can recognize when on PDA within Odin. Plus a lot of times I click on a link for a download off this site and it sends me to some watch-movies website. Not a actual download. Or I am just missing it.
Learning76 said:
Basically when I download the zip file I want and then extract it to a specific folder. All I after unzipping is File folders with other file folders inside,Img, File, PROP, and SH. I never extract anything that is a Tar file or anything Odin can recognize when on PDA within Odin. Plus a lot of times I click on a link for a download off this site and it sends me to some watch-movies website. Not a actual download. Or I am just missing it.
Click to expand...
Click to collapse
Maybe it's a bad link to your stock file then. Perhaps someone can give proper file link to the stock firmware. Inside the zip it's basically a md5 file for firmware to flash. Sadly I don't have a proper yoi will have to find of the net.
Hi guys
I wonder could anyone help me. I'm trying to flash a stock ROM on my s6 with ODIN. It goes so far and then fails on hidden.img I've researched it and the solution found here seems to have worked for most people. My problem is i cant get Odin to recognise the hidden.img.tar file - it just cant see it. I've tried all sorts of ways and i rename it as described and odin just wont recognise it in the right format. Please can someone help me? Just for the record what i do is:
The main image file i open with winrar. I get 8 files. i select the hidden.img file and extract and rename it as per the article. Odin i then select ap and point it at the location and it just wont find it. Odin 3.10.7 and windows 7 and windows 10
https://www.reddit.com/r/GalaxyS6/comments/35zshn/howto_fix_a_failed_odin_flash_softbrick_hiddenimg/
corkie1 said:
Hi guys
I wonder could anyone help me. I'm trying to flash a stock ROM on my s6 with ODIN. It goes so far and then fails on hidden.img I've researched it and the solution found here seems to have worked for most people. My problem is i cant get Odin to recognise the hidden.img.tar file - it just cant see it. I've tried all sorts of ways and i rename it as described and odin just wont recognise it in the right format. Please can someone help me? Just for the record what i do is:
The main image file i open with winrar. I get 8 files. i select the hidden.img file and extract and rename it as per the article. Odin i then select ap and point it at the location and it just wont find it. Odin 3.10.7 and windows 7 and windows 10
https://www.reddit.com/r/GalaxyS6/comments/35zshn/howto_fix_a_failed_odin_flash_softbrick_hiddenimg/
Click to expand...
Click to collapse
no need unrar that file... just flash that main image file at PDA section... that all... it should boot up like charm... ???
graphbyte said:
no need unrar that file... just flash that main image file at PDA section... that all... it should boot up like charm...
Click to expand...
Click to collapse
But i need to seperately flash the hidden image file thats the problem
corkie1 said:
But i need to seperately flash the hidden image file thats the problem
Click to expand...
Click to collapse
Can anyone help at all guys - im stuck without the phone
Hope this might help someone here.
I rooted my s8+ and basically got stuck with a soft-bricked phone, telling me I could only use official firmware etc etc. I was able to get the phone into download mode (eventually) but I wasn't able to flash anything including the stock Pie rom. I spent all night trying to find a solution to no avail and then found this, which I've edited a bit. And it worked. I've now got my s8+ back with Android 9 on it without any bloatware and it's actually better than ever. Thanks to Krolik301 for your help. I'm just hoping this may help someone.
1. Download the stock ROM and extract it.
2. Make a copy of the CSC file and rename one from the file type .md5 to .rar
3. Extract the PIT file from the CSC .rar file.
4. In Odin v3.13, make sure you add all four files from the extracted ROM (BL, AP, CP and CSC).
5. Click the PIT tab and add the PIT file that you just extracted from the CSC.rar file.
6. I the Options tab of Odin, make sure that Re-Partition, Auto Reboot and F.Reset Time are all ticked.
7. Click Start and hopefully you'll be back to your stock ROM
And please don't hold me responsible for any loss of data or a phone that still won't boot.
Hope this helps someone. Happy Easter
Muddyfunk said:
Hope this might help someone here.
I rooted my s8+ and basically got stuck with a soft-bricked phone, telling me I could only use official firmware etc etc. I was able to get the phone into download mode (eventually) but I wasn't able to flash anything including the stock Pie rom. I spent all night trying to find a solution to no avail and then found this, which I've edited a bit. And it worked. I've now got my s8+ back with Android 9 on it without any bloatware and it's actually better than ever. Thanks to Krolik301 for your help. I'm just hoping this may help someone.
1. Download the stock ROM and extract it.
2. Make a copy of the CSC file and rename one from the file type .md5 to .rar
3. Extract the PIT file from the CSC .rar file.
4. In Odin v3.13, make sure you add all four files from the extracted ROM (BL, AP, CP and CSC).
5. Click the PIT tab and add the PIT file that you just extracted from the CSC.rar file.
6. I the Options tab of Odin, make sure that Re-Partition, Auto Reboot and F.Reset Time are all ticked.
7. Click Start and hopefully you'll be back to your stock ROM
And please don't hold me responsible for any loss of data or a phone that still won't boot.
Hope this helps someone. Happy Easter
Click to expand...
Click to collapse
Hello. I'm helping someone on discord with this exact issue (the error code is "can't open the specified file (line 665)". I extracted the PIT file from CSC and placed it into the PIT file. I also put all of the firmware files in their proper place (except for HOME_CSC, as he wants to keep his files). Do I absolutely have to put the CSC file in place of the HOME_CSC file?