So I had an otterbox for my phone but it definitely added too much bulk.
I went ahead and bought a variation of this case: http://www.amazon.com/Samsung-SGH-i..._1_9?s=wireless&ie=UTF8&qid=1328678954&sr=1-9.
It barely adds any bulk, is comfortable to hold, and is probably one of the best slim cases for our phones. I haven't seen any other ones this size. I ordered a red one off ebay for about the same (amazon didn't cover them).
My white skyrocket + this red case looks amazing!
Platinum Series from Best Buy has been my favorite with several devices.
Hard rubber feel, adds minimal bulk, flat black
I forget the name brand manufacturer of the case, although I think best buys "brand" are cheaper anyhow. Guys on here know the name brand, I'll edit if i remember.
dac1227 said:
Platinum Series from Best Buy has been my favorite with several devices.
Hard rubber feel, adds minimal bulk, flat black
I forget the name brand manufacturer of the case, although I think best buys "brand" are cheaper anyhow. Guys on here know the name brand, I'll edit if i remember.
Click to expand...
Click to collapse
Seidio makes them. I have a PT from Best Buy for my Skyrocket and love it!
i've always used TPU cases for my phones. they're really cheap too and they work/feel great
dac1227 said:
Platinum Series from Best Buy has been my favorite with several devices.
Hard rubber feel, adds minimal bulk, flat black
I forget the name brand manufacturer of the case, although I think best buys "brand" are cheaper anyhow. Guys on here know the name brand, I'll edit if i remember.
Click to expand...
Click to collapse
californiarailroader said:
Seidio makes them. I have a PT from Best Buy for my Skyrocket and love it!
Click to expand...
Click to collapse
Ya they're the Seidio Surface cases and at Best Buy they're $35 whereas on the Seidio site they're $55 I think... I love the seidio cases and have used them on last few phones. Only thing about the PT cases from BB they're a little looser than usual... The bottom cap on my case got a little loose after taking the case off the first time and seems like it's getting looser every time I take the case off... Guess I'm gonna have to look for another case that fits in the holster...
This is the one I got this from eBay (link):
My phone:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I bought a slim case by Diztronic on Amazon and I'm pretty impressed. It has a simple design and doesn't add a lot of bulk. Best of all for $12 delivered it can't be beat.
How much thicker would you say that SGP made the phone?
There is a rubber that goes around the screen which slightly raises the case but not by much...the rest fits like a glove so not much thicker.
Rearth has a slim case. i love it! BEST SLIM CASE. i also have a sgp neo hybrid as my rugged case.
ampm325 said:
Rearth has a slim case. i love it! BEST SLIM CASE. i also have a sgp neo hybrid as my rugged case.
Click to expand...
Click to collapse
Oh nice, I kinda wanna get 1 of those but they're out of the white... Have you seen the seidio surface case? If you have, how does the rearth case compare to that?
jnicks510 said:
i've always used TPU cases for my phones. they're really cheap too and they work/feel great
Click to expand...
Click to collapse
I agree with you, for a slim case there is nothing slimmer than a TPU case. Also the TPU is smooth enough to let it slip in and out of your pockets.
justnada22 said:
I agree with you, for a slim case there is nothing slimmer than a TPU case. Also the TPU is smooth enough to let it slip in and out of your pockets.
Click to expand...
Click to collapse
Have you seen the rearth case? It really looks like it's slimmer than the TPU cases...
It does look like the Rearth case is better than the TPU cases and I would like to try one but they are currently out of stock for the skyrocket everywhere I have looked. I don't like the tpu cases I have tried since the ones made for slim phones cover the buttons and make them hard to press. I like the "hard" mesh cases that are the most lightweight and thinnest that I have seen for other phones, but the only two types made for the Skyrocket that I have found are either hybrid with TPU underneath or one I found on ebay that is thin and light, but does not protect the bottom or top edges or the corners and sticks out a bit so looks poorly made. Hopefully Rearth will produce another batch for the skyrocket. I currently have a snap on hard plastic type that works fine but is difficult to remove and since I occassionally have to do battery pulls (flash a lot of roms) and sometimes use a seidio extended battery, this is a factor, plus it is not as slim as it could be.
Has anyone ever dropped their phone with a Diztronic case on fro 3+ ft? How did it fair?
I currently have an Otterbox Commuter on my Captivate (which is getting replaced by a Skyrocket) and it has kept my phone from damage, but it adds more size than I like. The TPU cases don't look like they would protect a phone from more than scratches and small drops.
samtr87 said:
Has anyone ever dropped their phone with a Diztronic case on fro 3+ ft? How did it fair?
I currently have an Otterbox Commuter on my Captivate (which is getting replaced by a Skyrocket) and it has kept my phone from damage, but it adds more size than I like. The TPU cases don't look like they would protect a phone from more than scratches and small drops.
Click to expand...
Click to collapse
I have dropped my SR from roughly 4ft on a couple of occasions with a diztronic case (and SGP protector). One time it landed flat on the screen and the other time it landed on the top left corner and bounced a bit. The case, however, did its job (as did the screen protector for that matter) wonderfully and not a mark on the phone from dropping.
However, I can say that the diztronic gets dust inside it very easily and it has started to scuff the back and sides of the phone where it rubs. Not that serious to some but it is happening more and more as the case stretches out so if dust scuffs drive you nuts, beware.
I got my SR off Cl and it came with an Otterbox Defender. Solid case if you abuse your phone. I didn't like the size though. I've used the TPU cases with other phones and they are good, I've also used Casemate Barelythere...another solid slim option too, but they both offer very little actual protection. I wanted some protection without all that bulk so I bought a Seidio Active and love it. It adds substantial protect without excessive bulk.
http://goo.gl/F20V0
I got the black one, but to each his own...
rkub said:
Oh nice, I kinda wanna get 1 of those but they're out of the white... Have you seen the seidio surface case? If you have, how does the rearth case compare to that?
Click to expand...
Click to collapse
I come from the "slim" mentality, formerly I had a case-mate "Barley There" for my Blackberry 9700 Case Mate - Barely There 9700 | case-mate.com and now I have the Seidio Surface.
I am not used to a case protecting the front of a device, as the Active does, but it has saved me from a bind or two. When I had the barely there, my phone's corners got dinged up all the time. However, I find myself taking the device out of the case often because despite the fact that it is very small, it's not as small as the device itself (the case probably adds 4mm).
For the Active I would say:
Slim: 4/5 (4MM > without)
Protection: 4/5 (Minimal shock absorption)
For the Rearth i'm thinking:
Slim: 5/5 (I would say 1 - 2 MM > without)
Protection: 2/5 (corners open, face open)
samtr87 said:
Has anyone ever dropped their phone with a Diztronic case on fro 3+ ft? How did it fair?
I currently have an Otterbox Commuter on my Captivate (which is getting replaced by a Skyrocket) and it has kept my phone from damage, but it adds more size than I like. The TPU cases don't look like they would protect a phone from more than scratches and small drops.
Click to expand...
Click to collapse
I dropped my skyrocket from 3ft before with the TPU case. It was onto concrete/ sidwalk/ roadway material. I dropped it twice and there was no damage.
The only bad thing about the TPU cases is that the matte grey one turns yellow after a while...
Also, like another member mentioned, the volume buttons are really hard to press, or they press themselves if you don't cut the plastic out... but if you do cut the plastic out of the area where the volume buttons are, then it's hard to press the volume buttons
darkcurrent said:
I dropped my skyrocket from 3ft before with the TPU case. It was onto concrete/ sidwalk/ roadway material. I dropped it twice and there was no damage.
The only bad thing about the TPU cases is that the matte grey one turns yellow after a while...
Also, like another member mentioned, the volume buttons are really hard to press, or they press themselves if you don't cut the plastic out... but if you do cut the plastic out of the area where the volume buttons are, then it's hard to press the volume buttons
Click to expand...
Click to collapse
Darn, that's the one I got
Related
Hey guys,
Got a poll up and looking for feedback on what you guys think of these cases. They are all similar to each other in the sense that they have a plastic outer shell with a soft hybrid inner shell. All of them come in white and they range from $25-35 dollars. Personally I'm between the Spigen and Speck but I wanted to throw in the otterbox as another option. If you guys have something else in mind also let me know.
Thanks for the feedback guys,
JD
1) Spigen Slim Armor - $25 (Really love the price and i believe the speak grill is raised to allow for better sound transfer, not 100% sure)
2) Speck Candyshell - $35
3) Otterbox Commuter - $35
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/URL]
Forgot to mention, that they all have rubber at certain points on them so if anyone has used these, how are they with pocket lint?
I'll have a review of the Speck Candyshell up later today. I have both the Candyshell and Candyshell Grip.
Here's my review of the Slim Armor: http://forum.xda-developers.com/showthread.php?t=2262605
All three are very nice cases. The Otterbox and Candyshell offer the best protection. The lip on the Slim Armor is very low, but the trade off is the case is very slim. Personally, I would get the Candyshell or Slim Armor. The Otterbox is very durable though, and if you need the absolute best protection, get it.
AndroidFanNetwork said:
I'll have a review of the Speck Candyshell up later today. I have both the Candyshell and Candyshell Grip.
Here's my review of the Slim Armor: http://forum.xda-developers.com/showthread.php?t=2262605
Click to expand...
Click to collapse
Thanks, i'll be sure to check them out.
hinduboy74 said:
Thanks, i'll be sure to check them out.
Click to expand...
Click to collapse
Oops, I added some more info to my other post
Is the speaker grill on the slim armor raised to allow it to sound good even when placed with the screen up?
hinduboy74 said:
Is the speaker grill on the slim armor raised to allow it to sound good even when placed with the screen up?
Click to expand...
Click to collapse
It's pretty flush. I attached a few pictures that should show the grill and how the phone lies.
AndroidFanNetwork said:
... The lip on the Slim Armor is very low...
Click to expand...
Click to collapse
Spigen are #### ing idiots!
They could have easily made the lip a little larger for better front protection but noooooooooooo.
They probably just made the case like that to try and squeeze more money out of customers to buy their screen protectors as well
Spigen doesn't deserve any of our money for this greedy design flaw!
That was disappointing to find that out, i'm probably leaning towards the speck case now.
The Spigen Slim Armor, slim cases look the best. Personally i'm going commando with mine. I just can't put my phone in a case it makes it look worse and i like it look and be thin. It fits my pocket better. But if your a builder or trades working. I good case is a must..
ap3604 said:
Spigen are #### ing idiots!
They could have easily made the lip a little larger for better front protection but noooooooooooo.
They probably just made the case like that to try and squeeze more money out of customers to buy their screen protectors as well
Spigen doesn't deserve any of our money for this greedy design flaw!
Click to expand...
Click to collapse
As I mentioned in the other thread you posted this in, it's called the "Slim Armor" for a reason. It isn't meant to be a bulky, full protection case.
AndroidFanNetwork said:
As I mentioned in the other thread you posted this in, it's called the "Slim Armor" for a reason. It isn't meant to be a bulky, full protection case.
Click to expand...
Click to collapse
And I'll respond to both in kind: If your case has the word "armor" in it... then it should be able to protect the screen from smashing if its dropped
A little bit more lip would have completely taken care of this problem and allowed it to maintain it's slimness.
They definitely won't get a dime from me, as I will be returning mine, and I encourage others to not purchase from them for making so obvious a cash grab design flaw.
ap3604 said:
And I'll respond to both in kind: If your case has the word "armor" in it... then it should be able to protect the screen from smashing if its dropped
A little bit more lip would have completely taken care of this problem and allowed it to maintain it's slimness.
Click to expand...
Click to collapse
Armor =/= massive lip
Just like Otterbox =/= case made out of otter.
ap3604 said:
They definitely won't get a dime from me, as I will be returning mine, and I encourage others to not purchase from them for making so obvious a cash grab design flaw.
Click to expand...
Click to collapse
If you aren't going to keep yours, and you're going to get a full refund, why do you continually bash this case?
A design flaw is something that blocks actual function, like some of the HTC One cases that cover the IR blaster/power button. This case was specifically designed to be as thin as possible.
I'm not going to bash the Otterbox Defender because I think it's too bulky, I just won't buy it. Some people want that kind of protection. On the other side, some people want a very low lever of protection.
I just bought the Speck candy shell case at Best Buy as I didn't want to take my new phone to work without any protection. So far I like it. The fit is nice and tight, the rubberised buttons feel good, and the raised lip around the screen allows you to put the phone face down without scratching the glass. I also like the fact that the majority of the case is shiny so it slips into a pocket much more easily than the T-Mo TPU case I have for my original Galaxy S. I'm still going to get one of the Spigen glass screen protectors to go with it, but it'll do without for a couple of days more.
Another plus for Speck is they seem to have some more feminine colours. The Spigen cases are all black + one other colour, which doesn't look right with a white phone in my opinion. The Speck case I bought is white with turquoise and looks pretty sharp. It's also feminine without being pink
Hinduboy, with regard to pocket lint, it's not a total lint magnet like some cases, but it definitely picks up a bit. It seems to be quite attractive to cat fur!
Sent from my SGH-M919 using xda app-developers app
Spigen Slim is a nice looking, seems it is a Korea brand?
mahgnillig said:
I just bought the Speck candy shell case at Best Buy as I didn't want to take my new phone to work without any protection. So far I like it. The fit is nice and tight, the rubberised buttons feel good, and the raised lip around the screen allows you to put the phone face down without scratching the glass. I also like the fact that the majority of the case is shiny so it slips into a pocket much more easily than the T-Mo TPU case I have for my original Galaxy S. I'm still going to get one of the Spigen glass screen protectors to go with it, but it'll do without for a couple of days more.
Another plus for Speck is they seem to have some more feminine colours. The Spigen cases are all black + one other colour, which doesn't look right with a white phone in my opinion. The Speck case I bought is white with turquoise and looks pretty sharp. It's also feminine without being pink
Hinduboy, with regard to pocket lint, it's not a total lint magnet like some cases, but it definitely picks up a bit. It seems to be quite attractive to cat fur!
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Is hat particular speck case difficult to remove? Menacing taking it on/off?
Sent from my SPH-L720 using Tapatalk 2
reverepats said:
Is hat particular speck case difficult to remove? Menacing taking it on/off?
Sent from my SPH-L720 using Tapatalk 2
Click to expand...
Click to collapse
Not difficult at all. It's less flexible than a regular TPU case, but since the front lip is all TPU it comes off pretty easily if you need to get to the battery or SD card.
mahgnillig said:
Not difficult at all. It's less flexible than a regular TPU case, but since the front lip is all TPU it comes off pretty easily if you need to get to the battery or SD card.
Click to expand...
Click to collapse
Awesome! Tanks for the input. In BB right now lol. Heading to the register. Thanks again!
Sent from my SPH-L720 using Tapatalk 2
mahgnillig said:
I just bought the Speck candy shell case at Best Buy as I didn't want to take my new phone to work without any protection. So far I like it. The fit is nice and tight, the rubberised buttons feel good, and the raised lip around the screen allows you to put the phone face down without scratching the glass. I also like the fact that the majority of the case is shiny so it slips into a pocket much more easily than the T-Mo TPU case I have for my original Galaxy S. I'm still going to get one of the Spigen glass screen protectors to go with it, but it'll do without for a couple of days more.
Another plus for Speck is they seem to have some more feminine colours. The Spigen cases are all black + one other colour, which doesn't look right with a white phone in my opinion. The Speck case I bought is white with turquoise and looks pretty sharp. It's also feminine without being pink
Hinduboy, with regard to pocket lint, it's not a total lint magnet like some cases, but it definitely picks up a bit. It seems to be quite attractive to cat fur!
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
I did see that they have those cases at BBY but i was hoping they had the white/grey combo they only had the black and white/blue one. I might just end up ordering it through amazon. I've been using the platinum series white plastic case in the mean time.
What about the Spigen Neo Hybrid, Case-Mate Tough, or Incipio DualPro (Regular & Shine Versions)? They are very comparable to the cases mentioned above.
Whats the thinnest case you have found for the S4? I've been looking at various cases, and they are all so thick ( I usually go naked.. ) but I would like to put something over it for drop protection ( so no, skins don't work ). And don't suggest any of the crap offered by SPIGEN, I'm done with that worthless company ( ALL support issues with them ).
ITSkins has the ghost and Zero.3, but neither is available STILL ( they where suppose to be on the 15th ) and you can't pre-order them either....
Everything else i find just says "Thin" or some other wonderful adj, I'd like a number and facts. Thin is subjective....
rkennison said:
Whats the thinnest case you have found for the S4? I've been looking at various cases, and they are all so thick ( I usually go naked.. ) but I would like to put something over it for drop protection ( so no, skins don't work ). And don't suggest any of the crap offered by SPIGEN, I'm done with that worthless company ( ALL support issues with them ).
ITSkins has the ghost and Zero.3, but neither is available STILL ( they where suppose to be on the 15th ) and you can't pre-order them either....
Everything else i find just says "Thin" or some other wonderful adj, I'd like a number and facts. Thin is subjective....
Click to expand...
Click to collapse
I have the case mate barely there case. I have to say, it feels so nice in the hand.. Because of the matt finish. Better than any other case I had. And I also had the spigen neo hybrid. The look is also casual. Really like the style.
Here some foto's I just took.
Hope it helps.
Regards
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Verstuurd van mijn GT-I9505 met Tapatalk
I have the ringke rearth slim and it looks similar to the barely there above but even thinner (by the looks of his pics). Not much protection but improves grip and barely any if at all bulking up of the phone
Sent from my SGH-M919 using xda premium
i have this tpu case that to me doesnt feel like it adds any weight or thickness to the phone itself. http://www.amazon.com/gp/product/B00BYPZU28/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
here are some pics to show you what i mean. notice 2 of these pics you can see how the case works well with the mime ghost glass screen protector. it's also partially see through.
found this on ebay
Clear 0.3mm Ultra Thin Cover Case Screen Guard for Samsung Galaxy S4 i9500
This 0.3 case covers the top and bottom edges too, this will be the thinnest you can find on the market with a full protection. I've one when i'm using my S3, looking for a S4 one and found this.:good:
Sent from gala,y s4
hollisterryann said:
Definitely neo hybrid by spigen. Thing adds Like no thickness
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
I agree. It doesn't add anything thickness but HOWEVER, it does add some to the width making the phone feel wider.
He said no neo hybrid
rkennison said:
And don't suggest any of the crap offered by SPIGEN, I'm done with that worthless company ( ALL support issues with them ).
Click to expand...
Click to collapse
After everything I have read about Spigen, I am very hesitant to buy one of their products. The casemate looks pretty nice, but I don't like the openings on the top and bottom. I want a thin/light case, but I want a little bit of fall protection in it.
I've just got this one, loving it so far.
http://www.amazon.co.uk/gp/aw/d/B00BYMGQVU/ref=mp_s_a_1_2?qid=1369333383&sr=8-2&pi=SL75
Sent from my GT-I9505 using Tapatalk 2
Serious recommendation: I was in the same boat, and didn't think I would find anything I liked. I happened to be browsing at BestBuy while my wife picked out case. I noticed some RocketFish branded cases that look really slim. Asked if I could try one on my phone and it fit like a glove, barely added any size to it, but definitely makes it feel like I'm not going to accidentally fling the phone across the roam just taking it out of my pocket.
I also have the Ringke Rearth ultra slim case - which was not only the thinnest I've seen, but also very cheap!
I keep the Spigen Neo-Hybrid case on my phone though - I had an S3 get nicked up at the bottom where the ultra thin rearth case didn't cover. Outside of the neo-hybrid I think the rearth cases are my favorites - considering I bought one for my S4 immediately and had one for my S3 I'd feel confident suggesting it.
I purchased both the Ringke Rearth Slim and the Spigen Neo Hybrid. While the Spigen looks nice it really does add a lot of width to the phone. The Ringke is easily the slimmest case that I have used for any phone. Not to mention it only cost $2. The matte black has also been great for adding grip. My only complaint is that the Ringke case is very difficult to remove.
I have a Spigen Ultrafit. Its pretty darn thin.
I like the matte finish.
Spigen Ultrafit
Edit: it is just thick enough the effectively recess the buttons to protect them from drops, plus it works with a tempered glass screen protector. AND...its only $10 shipped with Prime.
what is the point of cases that dont cover the top and bottom? my dad's s3 has one of those and it got destroyed on the bottom from a small drop
RTbar said:
what is the point of cases that dont cover the top and bottom? my dad's s3 has one of those and it got destroyed on the bottom from a small drop
Click to expand...
Click to collapse
It would have to hit a very uneven surface...the corners are protected. You would have to drop in on gravel or a curb or something like a car door sill. If you drop in on tile or flat concrete it is impossible to hit the edge because of the gap created by the corners. I prefer minimal protection. My main concern is really protecting the corners back and front since those are what are going to hit 99% of the time. And the buttons...you can break the board connections (trust me I know, lol) if the phone lands on its buttons. I actually was thinking of going naked since the battery door can be replaced so easily and it is the entire back. Just a screen protector and a replaceable back. I have insurance. Also, I am a middle aged dad...I am not in the situations that you would drop a phone that often.
All that being said I will probably get another case at some point just because, lol.
I have the Body Glove phone case. Made of soft rubber for a nice all around grip. I purchased it at Walmart for $15. Link is for image of the case.
http://www.radioshack.com/product/i...gclid=CJD57O6KsrcCFRSN7AodYUMAAA&gclsrc=ds.ds
I had this case for my S3 and loved it......anyone know if there's a case just like this for the S4? I keep my phone in my pocket so I prefer the headphone jack and the charging port to be covered unless I'm using them.
theroyalwe said:
I also have the Ringke Rearth ultra slim case - which was not only the thinnest I've seen, but also very cheap!
I keep the Spigen Neo-Hybrid case on my phone though - I had an S3 get nicked up at the bottom where the ultra thin rearth case didn't cover. Outside of the neo-hybrid I think the rearth cases are my favorites - considering I bought one for my S4 immediately and had one for my S3 I'd feel confident suggesting it.
Click to expand...
Click to collapse
Supposedly the neo-hybrid makes the headphone jack extremely small though...I LOVE the look of that case, but as a Beats user, I'm afraid :crying:
DBA Cases has a thin case that is avaliable in six different colors.
sent from my 32gb + 32gb S4
Paradisimo said:
I purchased both the Ringke Rearth Slim and the Spigen Neo Hybrid. While the Spigen looks nice it really does add a lot of width to the phone. The Ringke is easily the slimmest case that I have used for any phone. Not to mention it only cost $2. The matte black has also been great for adding grip. My only complaint is that the Ringke case is very difficult to remove.
Click to expand...
Click to collapse
I have the Ringke. It is very thin. I don't feel like it would do anything to prevent the screen from cracking. It would prevent scratches to the back though.
I now have a Chinese knock off neo hybrid. Add with the genuine. .. Pretty thin on the back but it does make the phone wider. I do feel like this will help obsorb shock in a fall.
I'm not a fan of bulky cases that add alot of girth to an already large phone. Also don't like silicone as it's too much friction going in and out of my pocket.
When I purchased my LG G3 at Best Buy I picked up their "house brand" most inexpensive case/condom for the phone and it is fantastic. Just thick enough to provide edge and corner protection from a mild fall but not so thick as to add alot of bulk to it. The G3 was also a very difficult phone to hold... almost too thin at the edges. This gave it a nice grippy edge to hold on to, but it wasn't silicone so it still slid in and out of my pocket.
Going to all the major retailers now is nothing but iphone iphone iphone and MAYBE a few S5 and S6 cases. Bestbuy, Target, Walmart, etc.
I have Amazon prime but this is something I'd like to see in person, maybe take out of the box before buying.
So any recommendations? Hope I have explained the type of case I'm looking for. I really don't want to ding up my new beautiful aluminum sides or god forbid shatter the glass. The edges are just a bit too slippery for my liking.
Thanks!
-Jon
I bought the Spigen Neo Hybrid case for around $14 on Amazon and I love it. It's thin and has a premium feel to it.
http://www.amazon.com/gp/aw/d/B00PF...ubber+case&dpPl=1&dpID=51PBdhDqISL&ref=plSrch
Looking for something like this but without the dots on the back just smooth.
poor_red_neck said:
http://www.amazon.com/gp/aw/d/B00PF...ubber+case&dpPl=1&dpID=51PBdhDqISL&ref=plSrch
Looking for something like this but without the dots on the back just smooth.
Click to expand...
Click to collapse
I've been using this one for a month now. Slim and smooth, but not slippery.
http://www.amazon.com/gp/product/B00PUXOEKE
Oh that is PERFECT!! Odered.
Awesome thank you very much that is exactly what I was looking for.
Looks like it is too late for my recommendation, but I really like the Samsung Protective Case made by Samsung:
http://www.amazon.com/Samsung-Galax...&tag=httpwwwdolphc-20&linkId=OMBRYAX56M45VB35
I have the Diztronic case as well, and don't like it as much because it is slippery, has less protection, and doesn't look as good as the Samsung one.
I second this guy...
I have a Spigen Neo Hybrid, a Spigen tough armor and an orange UAG case.
out of all I found out how well made the Samsung protective case is, also the feel in hand is great, not bulky very durable and it does protect the phone very good.
it has become my daily favorite case.
I still use the UAG case from time to time for looks but still bulky.
and well the Spigen cases I only used them for a while.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
beezar said:
Looks like it is too late for my recommendation, but I really like the Samsung Protective Case made by Samsung:
http://www.amazon.com/Samsung-Galax...&tag=httpwwwdolphc-20&linkId=OMBRYAX56M45VB35
I have the Diztronic case as well, and don't like it as much because it is slippery, has less protection, and doesn't look as good as the Samsung one.
Click to expand...
Click to collapse
poor_red_neck said:
http://www.amazon.com/gp/aw/d/B00PF...ubber+case&dpPl=1&dpID=51PBdhDqISL&ref=plSrch
Looking for something like this but without the dots on the back just smooth.
Click to expand...
Click to collapse
in my country, bosnia, cases like this are 3$
I received my diztronic case today. Exactly what i was looking for. Only downside so far is it makes it very difficult to activate one handed mode. I actually use that feature daily.
I imagine any case will do this though. Thank you very much for the recommendation!
poor_red_neck said:
I received my diztronic case today. Exactly what i was looking for. Only downside so far is it makes it very difficult to activate one handed mode. I actually use that feature daily.
I imagine any case will do this though. Thank you very much for the recommendation!
Click to expand...
Click to collapse
The first case I ordered was the Samsung OEM listed above. I used it for two weeks and decided to also order the Diztronic one I linked to. Between them, I use the Diztronic most of the time and actually like how it feels more than the Samsung one. But the Samsung is harder and does provide a little more protection.
I used this approach on my Note 2. Mask off your screen with masking tape. Apply 3 layers of electrical tape to al 4 corners of your device, neatly and evenly trimmed to act as "bumpers". Spray light even coats of Plastidip, 6 coats should do. If you don't like it or it becomes damaged you can peel it off. Apply your bumpers 1 layer at a time . Run a razor around the edge of the battery cover when dry, you can easily remove the battery cover whenever. Thinnest phone case you can imagine, and grippy. Minimal protection though
Sent from my SM-N910T using XDA Free mobile app
kbrn said:
I second this guy...
I have a Spigen Neo Hybrid, a Spigen tough armor and an orange UAG case.
out of all I found out how well made the Samsung protective case is, also the feel in hand is great, not bulky very durable and it does protect the phone very good.
it has become my daily favorite case.
I still use the UAG case from time to time for looks but still bulky.
and well the Spigen cases I only used them for a while.
Click to expand...
Click to collapse
Yah I bought the Samsung OEM case in blue and I bought a Casology Bumper case in carbon Fiber. Both are superb but the samsung one is a bit thinner. Bot cases, though feel like you have the phone without a case. I like the corner bumpers as well on the Samsung Protective Case. It provides a very slim design without compromising protection.
Using black/grey version of Samsung's protective case. It is very good & slim. From back, the phone looks like Note 4 Active! Only thing I miss is a kickstand.
mtatohin said:
Using black/grey version of Samsung's protective case. It is very good & slim. From back, the phone looks like Note 4 Active! Only thing I miss is a kickstand.
Click to expand...
Click to collapse
How is it when taking it out of your pocket? Is it smooth or is it like those silicone cases that are hard to take out? I recently got a Note 4 and I'm also looking for a case that's thin. Also, has anyone ever bought a S Pen from amazon or ebay and recommend it? I bought my Note 4 used and it didn't have the S Pen. Samsung website has them for $30 and it seems pretty expensive for a stylus.
j21098 said:
How is it when taking it out of your pocket? Is it smooth or is it like those silicone cases that are hard to take out? I recently got a Note 4 and I'm also looking for a case that's thin. Also, has anyone ever bought a S Pen from amazon or ebay and recommend it? I bought my Note 4 used and it didn't have the S Pen. Samsung website has them for $30 and it seems pretty expensive for a stylus.
Click to expand...
Click to collapse
Just get the stylus from Ebay. They have the original ones and theyre like 2 for $5 with rubber tips and everything. As for the Samsung Case, it provides decent protection and is very easy to take out of one's pocket. The silicon around the sides gives it grip but doesn't makenit clumsy to take out as the back is plastic and much more smooth.
Superdudekk said:
Just get the stylus from Ebay. They have the original ones and theyre like 2 for $5 with rubber tips and everything. As for the Samsung Case, it provides decent protection and is very easy to take out of one's pocket. The silicon around the sides gives it grip but doesn't makenit clumsy to take out as the back is plastic and much more smooth.
Click to expand...
Click to collapse
Thanks, I think I'll order the Samsung case then. I haven't seen another case that looks as thin and protective as the Samsung one.
Any good suggestions for a very slim case?
Samsung Protective Case OEM is quite slim
poor_red_neck said:
http://www.amazon.com/gp/aw/d/B00PF...ubber+case&dpPl=1&dpID=51PBdhDqISL&ref=plSrch
Looking for something like this but without the dots on the back just smooth.
Click to expand...
Click to collapse
i use this one and it is my favourite till now.
Best Note 4 case I have....
http://www.amazon.com/Nillkin-Samsu...id=1453178640&sr=8-10&keywords=nillkin+note+4
I have several Spigens, Ringkes, Verus cases, OEM wireless flip case. The TPU above is the one I keep going back to. Only 0.6mm thick, makes the phone feel "caseless".
I just ordered the Diztronic case from Amazon. Not set to be released until Nov 4, but since my phone isn't set to ship until the 23-25, it should be here in plenty of time.
So far this looks like like the best option to me.
I've used their cases for past nexus phones and they've always done well. Some movement a year in but overall thin and protect it without being bulky
Sent from my A0001 using Tapatalk
I tried several cases, this is definitely my favorite. Very grippy and the buttons are so easy to push.
Does this that a textured inside or the air pocket corners?
Sent from my Google Pixel XL using XDA Labs
I got mine last week. Great case as usual.
Best and most elegant phone case I've ever had. Now where's my full coverage screen protector?
I order this on Amazon last Saturday and got it Tuesday. It's a temporary case until something thinner comes out, but I agree it's the best option. It's a nice case, it's TOO bulking and very grippy (but not too much where I can't slide it in my pocket. Great fit and I recommend anyone who likes a thin case who is waiting for a CaliCase to get this in the mean time!
Josh
Mines super slick should of waited for pixlee one. Love the buttons on it though. But someone just said the parallax case is only .5mm thicker than the maxboost so I may get that instead.
I got this case as well. I really dislike the raised side lip it has, it makes it feel more bulky than I prefer. If it didn't have that raised side lip I would love this case.
Sent from my Pixel XL using Tapatalk
I've gone through the Sparin case from Amazon and three Google cases, the clear, the silicon and a Live case. The Diztronic blows them all away in terms of actual protection from a very minimal form factor. The Sparin is a nice case, especially for $10, but it feels pretty flimsy when compared to the Diztronic. I had a D case with my N6 and am not at all surprised that I've sifted through other cases to land back in D's corner. The only thing I would probably trade it for is a really nicely done leather case (looking at you, Bellroy).
https://www.amazon.com/Pixel-Diztronic-Slim-Fit-Flexible-Google/dp/B01M35YM2M
They just posted some new cases too.. Full Matte with popping colors;
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The Pixelee also in awesome colors;
joshacct1986 said:
I order this on Amazon last Saturday and got it Tuesday. It's a temporary case until something thinner comes out, but I agree it's the best option. It's a nice case, it's TOO bulking and very grippy (but not too much where I can't slide it in my pocket. Great fit and I recommend anyone who likes a thin case who is waiting for a CaliCase to get this in the mean time!
Click to expand...
Click to collapse
The Diztronic is too bulky??? I don't see how you'd possibly get a thinner TPU case. It'd be so thin it'd be useless, or you're approaching sticker protection.
I have the Diztronic and the similar Spigen Armor (no plastic, just TPU) and the Spigen's sides are slightly thicker, presumably with their "air" protection, but otherwise the cases are very similar in feel. Spigen has more "design" to it, including the carbon spot (which I personally dislike) but otherwise both cases are very similar.
khaytsus said:
The Diztronic is too bulky??? I don't see how you'd possibly get a thinner TPU case. It'd be so thin it'd be useless, or you're approaching sticker protection.
I have the Diztronic and the similar Spigen Armor (no plastic, just TPU) and the Spigen's sides are slightly thicker, presumably with their "air" protection, but otherwise the cases are very similar in feel. Spigen has more "design" to it, including the carbon spot (which I personally dislike) but otherwise both cases are very similar.
Click to expand...
Click to collapse
Some people don't want a case at all but want to protect against bumps, scratches for example https://9to5toys.com/2014/10/29/thinnest-iphone-6-plus-cases-prevent-camera-wobble/
khaytsus said:
The Diztronic is too bulky??? I don't see how you'd possibly get a thinner TPU case. It'd be so thin it'd be useless, or you're approaching sticker protection.
I have the Diztronic and the similar Spigen Armor (no plastic, just TPU) and the Spigen's sides are slightly thicker, presumably with their "air" protection, but otherwise the cases are very similar in feel. Spigen has more "design" to it, including the carbon spot (which I personally dislike) but otherwise both cases are very similar.
Click to expand...
Click to collapse
I posted on another thread about wanting something that doesn't protect against impact, just scuffs to the sides and back. I want something similar to The Veil by Caudable that is ultra thin.
So is it too grippy or slick..I've seen both comments. Also do the matte and pixlee ones feel the same
I just received my diztronic case. As usual it is top quality. I used them on my Nexus 5X, and to be honest, for quality non hardshell cases that are out soon after phone releases...they really are worth the money.
edit responses:
Q.) So is it too grippy or slick..I've seen both comments. Also do the matte and pixlee ones feel the same
A.) Honestly...Its pretty well balanced. I personally like it a BIT more grippy, but my experience with diztronic cases, is that the longer you ahve them your hand wears down the matte a TINY bit(not enough to SEE) and it becomes perfectly grippy.
Q.) Does this that a textured inside or the air pocket corners?
A.) no.
Will edit this post with any other questions about the case.
Just received my black pixlee case and it's my first Diztronic case and I love it! It's so minimal and classy.
AllusionPDX said:
I just received my diztronic case. As usual it is top quality. I used them on my Nexus 5X, and to be honest, for quality non hardshell cases that are out soon after phone releases...they really are worth the money.
edit responses:
Q.) So is it too grippy or slick..I've seen both comments. Also do the matte and pixlee ones feel the same
A.) Honestly...Its pretty well balanced. I personally like it a BIT more grippy, but my experience with diztronic cases, is that the longer you ahve them your hand wears down the matte a TINY bit(not enough to SEE) and it becomes perfectly grippy.
Q.) Does this that a textured inside or the air pocket corners?
A.) no.
Will edit this post with any other questions about the case.
Click to expand...
Click to collapse
Smallsmx3 said:
Just received my black pixlee case and it's my first Diztronic case and I love it! It's so minimal and classy.
Click to expand...
Click to collapse
Let's get some pictures, I like to see what they look like.
clockcycle said:
Let's get some pictures, I like to see what they look like.
Click to expand...
Click to collapse
I do not have any way to take pictures of it on the phone, but I do have my Nexus 5x, which fits exactly the same. To the point that when I reach into my bag to grab one,i don't realize which one I am holding for a good amount of time.
My favorite feature about them is the buttons though. It gives them this perfect tactile clicky feel that you don't get with anything else.
These are great cases. Just ordered my second one (different color)
Similar to the LG V30 "cases" thread -- but specifically for belt holsters/wallet style holder for the LG V30. I do NOT like to stick my phone in my pants pocket, where's there's car keys, coins, etc that may scratch the display. Even with a bumper case, I also use a belt-style holster for my smartphones. My wife uses something similar to stick her phone in her purse, to protect against all the metal objects in there. We both have TPU bumper cases for drops. This is for additional protection when not using the phone and means to carry it.
These are my search parameters, but you can change them... You can narrow to type of material, design, whatever. Right now there's almost a thousand search results and that will probably only increase!
LG V30 HOLSTERS: EBAY LISTINGS -- LOWEST PRICES FIRST, FREE SHIPPING, BUY IT NOW, WORLDWIDE SEARCH.
SOME of the belt style holsters do attach to the back of the phone, so there may some overlap in the "cases" and "holsters" threads -- but I thought this category is also important as it's not the bumper cases or even hybrid cases.
EXAMPLES:
Leather Sideways Holster/Case for Cell Phones COMPATIBLE WITH Otterbox Symmetry (or Otterbox Defender)
$6.34 with FREE shipping
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here's a leather belt LG V30 holster that is wide enough to also let you have a bumper case on your phone. Just specify in the drop down menu how big you want "Otterbox Symmetry" big or "Otterbox Defender" big? Of course, prices change, but that's the price right now.
Here's the rugged nylon type my wife likes:
Luxmo Vertical Holster Belt Clip Pouch Holster/Case
$5.95 with FREE shipping
Just specify in the drop down menu you want LG V30.
I usually do the seidio surface/holster combo but they are not out yet.
I snagged this for the belt clip
https://www.amazon.com/gp/product/B0764MK8TT/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
And am using this phone case
https://www.amazon.com/gp/product/B0734ZX4RH/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
They work perfectly together.
steve841 said:
I snagged this for the belt clip
https://www.amazon.com/gp/product/B0764MK8TT/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
And am using this phone case
https://www.amazon.com/gp/product/B0734ZX4RH/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
They work perfectly together.
Click to expand...
Click to collapse
Interesting.
steve841 said:
I snagged this for the belt clip
https://www.amazon.com/gp/product/B0764MK8TT/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
And am using this phone case
https://www.amazon.com/gp/product/B0734ZX4RH/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
They work perfectly together.
Click to expand...
Click to collapse
@steve841 and @ChazzMatt, just wanted to say I bought both of these products and steve841 is right, these go perfectly together. The fit is perfect. It feels really secure.
steve841 said:
I snagged this for the belt clip
https://www.amazon.com/gp/product/B0764MK8TT/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
And am using this phone case
https://www.amazon.com/gp/product/B0734ZX4RH/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
They work perfectly together.
Click to expand...
Click to collapse
Hey, thanks for that. I will not buy this phone without a holster -- I need it for work -- and I hate the thought of running the V30 with an ugly case. Your setup might do the trick until a case-free holster is released.
On that note, I chatted with Seidio and emailed Encased.
They both told me there are no current plans for naked holster (Sedio "Spring Clip" series and Encased "Case Free" series). But the V30 is getting enough strong buzz that I'm counting on there being demand for it.
In the past, I've compared dimensions of other phones and found holsters that were a close enough fit to hold me over. I'm not finding a good candidate for this phone.
WOW
Support Agent
Support Agent
Hello, would you like to talk about any of our products?
Guest
any reason why you will not be making surface cases for the LGV30
I see it for S8 and google hones
I've been using that case on everyone of my phones
Support Agent
We just do not see the market for that device.
Guest
huh its top 3 in the market today top tier phone and ranks with the pixedl 2 xl and note 8
so no holster either than I asume? Read
Support Agent
While that may be true, other phones are selling more. no holster sorry.
Hi
Hey Now! I've got my chosen combo.
For the holster, I picked up the Encased Duraclip that Steve841 linked to above. Note that unlike the Seidio Spring Clip, which has a great and easy to use mechanism to "clip in" and "clip out" the phone in a very fluid motion, this particular Encased holster requires the phone to be slid in lengthwise, and it's a friction fit -- there's no positive latch.
I also tried out faux leather holsters by Goalany and SumacLife from Amazon. The Goalany unit was too room -- it could handle a 3/4" phone or a thick Otterbox case. The SumacLife was a good fit, but not the swiftest to get the phone out.
https://www.encased.com/products/lg...-series-slim-grip-case-belt-clip-smooth-black
I ordered a bunch of cases to try out. Didn't like the Ringke Fusion clear. It's two pieces and as shown in other posts, is going to yellow. The Ringke Onyx was acceptable but I'm not a fan of the raised edge along either side of the screen. The TopAce Ultra Thin was probably my runner up. The case that came with the Encased holster is hard plastic and durable, but interferes slightly with my Tylt Vu charger (I have to slide the phone about 1/2 inch up the incline to get the charger to activate, then I can let it sit in the cradle properly and it charges no problem. Oh -- all of these cases worked well with the Encased holster.
The case I ended up with? The Lumion Huey. It's pretty minimal. The case is every so slightly raised along the top and bottom edges of the phone, but its edges sit a little lower along the sides, unlike the others. It's a compromise of protection for usability. It slides very nicely into the Encased holster, about the same amount of resistance The design along the back reminds me of the Pixels. I really like how they created a symmetric cut-out for the camera and flash -- this design decision makes the other cases look weird. The sides of the case are every so slightly ribbed in the long direction for grip, while enhancing the slide-in / slide-out properties of the holster. All of the cutouts are excellent with the exception of the audio jack, which is just slightly off (visible, but less than a millimeter).
https://www.androidheadlines.com/2017/08/lumion-announces-three-cases-for-the-lg-v30.html
As an aside, I wasn't too sure what to expect of the Huey, but it showed up in a plastic retail display package that looks like it should cost more than the TPU case contained inside!
Just seen this on encased. I am ordering one now.
killakarl said:
Just seen this on encased. I am ordering one now.
Click to expand...
Click to collapse
Ah, thank you but curses! Also available on Amazon for $16, I see.
I have five holsters for other phones in front of me, delivered yesterday from Amazon.
I was just minutes away from transplanting the spring clip from a Seidio iPhone 6 plus holster onto a Seidio holster for the Nexus 6, which would have given me the perfect fit for my V30 in its slim Lumion Huey case.
I'm ordering the Encased holster now, but I'm going to hang on to my collection of others until I receive it, just to hedge my bet.
I am just excited for a spring clip. I absolutely dislike the ones you have to slide. The horizontal clip seems way to finicky. Sometimes I have to use both hands to get it out. So it is an definite for me to have the spring clip. I asked them earlier if they were going to have them and they told me no. So I was pleasantly surprised to see this.
Well poop, the Encased spring clip holster arrived today and it's s no-go with the TPU case I'm using.
I'm sure it's fine with the big, clunky., ugly hard plastic case that's included. With TPU there's a 1/8 gap between the screen and face of holster; it rattles around like mad.
I think I'll have to go with my hybrid Seidio setup of the iPhone 6 plus holster and Nexus 6 clip.
Nay Tyzon said:
Well poop, the Encased spring clip holster arrived today and it's s no-go with the TPU case I'm using.
I'm sure it's fine with the big, clunky., ugly hard plastic case that's included. With TPU there's a 1/8 gap between the screen and face of holster; it rattles around like mad.
I think I'll have to go with my hybrid Seidio setup of the iPhone 6 plus holster and Nexus 6 clip.
Click to expand...
Click to collapse
I don't think the case that came with it was too bulky. But at least the hole for the headphone jack is a little better than the other cases I have. It looks to be off a bit still. But even having smaller cases, I still don't like the wiggle but at least it won't be in my pocket. I dislike having my phone's in my pocket. The spring clip is a must though.
killakarl said:
I don't think the case that came with it was too bulky. But at least the hole for the headphone jack is a little better than the other cases I have. It looks to be off a bit still. But even having smaller cases, I still don't like the wiggle but at least it won't be in my pocket. I dislike having my phone's in my pocket. The spring clip is a must though.
Click to expand...
Click to collapse
I'm using at Lumion Huey TPU case, and it's very similar in dimensions to the other TPU cases I ordered up, made by Ringke and TopACE.
As long as I can find a way to get Seidio's pin removed from, then resecured back into the spring clip hinge, I'll be golden with their iPhone 6 Plus holster for the V30.
Frustrating.
Nay Tyzon said:
I'm using at Lumion Huey TPU case, and it's very similar in dimensions to the other TPU cases I ordered up, made by Ringke and TopACE.
As long as I can find a way to get Seidio's pin removed from, then resecured back into the spring clip hinge, I'll be golden with their iPhone 6 Plus holster for the V30.
Frustrating.
Click to expand...
Click to collapse
You might need a link remover like for a watch band.
My Supcase Unicorn Beetle Pro case has a holster. It's ugly and oldskool 90s like but it's there. I just use it as a stand though for watching videos.
Sent from my LG-H932 using XDA Labs
I'm using my old Note 4 Pdair holster case with my LG V30 WITH the spigen neo hybrid case. Fits pretty good. I'm happy with it
I have this case. i dont use the belt clip/holster but its of good quality and the case is pretty awesome.
https://www.amazon.com/gp/product/B074XGX1TY/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
seang said:
I have this case. i dont use the belt clip/holster but its of good quality and the case is pretty awesome.
https://www.amazon.com/gp/product/B074XGX1TY/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I have the same... Used one in my N6 as well... Great case and holster does work on belt nicely.
---------- Post added at 01:04 PM ---------- Previous post was at 01:03 PM ----------
seang said:
I have this case. i dont use the belt clip/holster but its of good quality and the case is pretty awesome.
https://www.amazon.com/gp/product/B074XGX1TY/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Oh and Seang... If you're not using the holster, you can always send it my way! Lol!