[Q] No image exists !! (ipaq voice messenger 514) - Non-Touchscreen Windows Mobile Other

Hi there,
i have a windows-based device HP iPaq 514,
several days ago i wanted to download there a new windows (special based wm 6.5 developed by smbd from Russia)
and when i tried to install it, insteller showed me about 48% and then jumped to 100% and said to me that i have finished the installation.
So then when i tried to turn on my device, i see only text "No image exists !!".
I searched all information through over all google, all ways that I found don't helped me. I tried to enter to bootloader by the way holding left bottom volume key and left and down navigate keys while connected USB-cable, and other combinations of keys, no one helped me to enter bootloader. So I can't to install a new ROM now.
Have you any ideas to solve this problem?
thnx.
P.S.: sorry if there are mistakes in the text, i'm from Ukraine and I didn't use translator
P.S.S.: iPaq from Italy (s/n FA906AA#ABZ)

hello,
have looked trough search engine of this forum??? Try to search the thread about win 6.1 and about firmware for 514... you have various ways to enter bootloader but i can't remeber them because i don't work with this phone anymore... good luck to you and if you find something interesting about new ROMs please post to this section.

Related

Hi everyone, i need some help please

Hello guys, it's great forum... one of my favorites
So now i need help. recently i've bought a MDA (PRO?) or HTC Universal
So i need advise - which one is the best ROM that i download and flash on my beloved device... and how to do it ?
PLS HELP ME, i am new in this, i have flashed successfully my previous HTC P3300 with the black&whyte v3 WM6, but now i don't know what must be done with this big machine - the universal...
Any suggestions and advises are wellcome and will be apretiated...
P.S. - Sorry 4 my language I need more practice
certomaz, I suggest you to read the wiki first! beside this is also helpful http://forum.xda-developers.com/showthread.php?t=290234
anyhow short summarize of the new ROM flashing:
1.0 put your device in to boot loader mode with pressing > power button + hardware button for the back light + push the reset button until you see on the screen become dark and it says "serial" mode.
2.0 connect your device to your computer.
2.11 open your folder in which you have your ROM file (nk.nbf) in this folder you will also find the upgrading utility (UpgradeUt_noID.exe) However the new ROM does not have the radio file included. if you wan to upgrade as well your Radio file then you need to get it from the FTP side. it seams most of the guys here happy with the radio version of 1.15 but I think it is up to your location.
3.0 Start the exe file and follow the screen.
4.0 after some 10-15 minutes the upgrade will be completed. then you disconnect your device from your computer.
5.0 press both hardware soft buttons + with your stylus push the reset button until you see the message on the screen > press 0 to restore factory default< which you will follow.
6.0 let the device boot up and follow the screen.
well I hope it is helpful. good luck
certomaz said:
Hello guys, it's great forum... one of my favorites
So now i need help. recently i've bought a MDA (PRO?) or HTC Universal
So i need advise - which one is the best ROM that i download and flash on my beloved device... and how to do it ?
PLS HELP ME, i am new in this, i have flashed successfully my previous HTC P3300 with the black&whyte v3 WM6, but now i don't know what must be done with this big machine - the universal...
Any suggestions and advises are wellcome and will be apretiated...
P.S. - Sorry 4 my language I need more practice
Click to expand...
Click to collapse

Do You have Problem downgrade fr ROM 2.03 TX WWE

Hi all,
I'm Indonesian. My Device is XDA II Mini. A few weeks ago I have upgrade the ROM to 2.03 TX WWE, used it for about week. A problem appear when I tried to downgrade the ROM to the original one from seeo2.com site the PC tell the error 150 (I think its about the connection).
when I read this forum, i know the many people have the same problem with me.. and still not found yet the solution for solving this problem.
With this situation I made this new thread to share our problem in this thread. Its about the history from ROM 2.03 TX WWE, about the maker of this ROM and for the warning massage for anyone who wish to write this ROM to their device so they will think 100 times to use this ROM.
Lets join this thread and hope there be a nice guy who can solve our problem.
regards
Eric
Jakarta-Indonesia
Hello,
I have the same problem with my magician. I flashed so many times some ROMs on my Magician before without any problems. But since I flashed the 2.03TX ROM, there is no way to flash any ROM. I also can't reflash the 2.03TX ROM. It always says, that there is an Connection Error.
I tried to flash with the official Setup and also with the No_ID.exe, but there is no chance to do something.
The 2.03TX is a very nice Rom, but i want to use the programm "Phone Extender" on my Magician and it doesen't run with 2.03TX...
Please help us someone, I want an other Rom on my Magician!
Where is everybody.....
Please Help us hiek hiek hiek.... cry cry cry....
Does anyone can help us ?????
Pleeeeaaaaseeee......
The same problem, the 2.03TX WWE is a nightmare for me.
I haven't got any problem.
Flashed just last week tx203->TMobile112->wm61.
Very happy with everything, I am using XP and O2 mini
you should flash from bootloader.
I have problem after try flash wm6 from 2.03 TX WWE phone only boot mode ... any help .. I try to flash same rom but I give same error on country id
I have the same problem.
Solution is to enter to the bootloader mode somehow and downgrade to original not bigstorage rom and than flash new cotula rom.
If you can't enter to the bootloader mode with power+camera+reset buttons try to hold longer or rapidly press power+camera and then press reset a few times. I'm succeeded finaly...
to bootloader mode mean screen with serial or usb status ... my problem is I try more rom but any flash I don't have original rom ... what I do?
hello im from Indonesia too...
You can use magicianUpdt_NoID (or another name, i forgot)
you can search at xda-developers ftp..
I have no problem with mine.
When I flashed this ROM it got automatically flashed twice.. I don’t know what happen but it was successful
Hello
I was sucessfull.
There is a 2 step flash!!!
P-O
I try to use this too but nothing no flash ....
Try this rom: http://rapidshare.com/files/18876133/NL_11300_131_11200.exe
If this doesn't work tell me the error message...
ok this img of error the image 1 when start exe the other when stat update noid
jovan.asanin said:
I have the same problem.
Solution is to enter to the bootloader mode somehow and downgrade to original not bigstorage rom and than flash new cotula rom.
If you can't enter to the bootloader mode with power+camera+reset buttons try to hold longer or rapidly press power+camera and then press reset a few times. I'm succeeded finaly...
Click to expand...
Click to collapse
Mine keeps reseting everytime it should go into the bootloader screen.
I can force it, but then the update wont continue anymore.
How did you do it?
---Edit---
Nevermind, found the solution here, its the old vista driver bug... :/
http://forum.xda-developers.com/showthread.php?t=291723
I use xp ...
well... it worked on mine...
Try the driver thingy anyway and follow the instructions to the letter.
I try more and more but notuhing
Here's what I did step-by-step:
- Recharge the battery to at least 70% in a electric charger (not connected to the PC).
- Go into bootloader (press the power button +camera button without releasing and click the tiny little hole on the right bottom side of the device, next to the audio entrance).
- The screen goes black, that's normal, with the help of a bright light you can see its written on the screen "SERIAL" and "V1.02" (or something similar).
- Go into Active Sync on XP (or Windows Mobile Device Center on Vista) and uncheck the option "Allow USB Connections".
- Connect your pocket pc to the PC usb (its still in the bootloader screen, right?).
On Vista (I think XP can skip this step)--------------->
- Go to Control Panel > Administrative tools > Services and start the services "windows mobile device connectivity" and "windows mobile device 2003 connectivity", its they are already running thats ok.
- Now go to Control Panel > System > Device manager, find your mobile device and force the update of the driver attached here.
- Now, press Ctrl+Shift+Esc for Taskmanager and kill "WMDC.exe".
------------------------------------------------------------------->
- Download this rom (46mb): http://rapidshare.com/files/18876133/NL_11300_131_11200.exe (its in english WWE)...
- With Winrar, extract that EXE into a folder.
- Copy the MaUpgradeUt_noID.exe attached here into that folder, with the rest of the files.
- Run MaUpgradeUt_noID.exe.
- If all goes well the update will take a loooong time and pass thru three install bars, that's normal.
- After that it recommends a Hard-reset (Power button + reset at the same time).
Now your rom is official, and you should have no more problems.
Install the Cotulla WM6.1 rom: http://forum.xda-developers.com/showthread.php?t=492937
Based on: http://forum.xda-developers.com/showthread.php?t=291723

Problem while flashing

I was planning (and trying) to flash my device (Universal) with [UPDATED - 2008.12.31: Tomal v8.5] WM6.1 Pro CE OS 20764 and while the progress is at the stage of getting the information about my device, I don't know what, but something happened, and it caused error.
soft resef seems not to work and now only thing I am able to see on my screen is (while hard resetting)
"Press 0 to restore factory default Press X to exit"
tried "0", it says "clearing now" and then, nothing shows up.
tried "X", and again nothing.
released and re-plugged batteries and nothing.
connected to PC and PC didn't recognized the device, and also ROM Upgrade Utility didn't do anything.
Besides those, I have no image on my screen, no color, nothing.
Please somebody help me
PS: I have read, searched, tried to find, googled etc, but couldn't find the same issue
Welcome to the forum
I understand you already READ the Wiki, so I would try to reflash another ROM starting form cero, of course you knnow to have your battery at 100% and all the procedure.
Can you enter in bootloader mode?
Hope it helped
Good luck,
Have you voted?
I am trying to ROM it in bootloader mode, and it stucks on 10%, 7%.
I tried 2 different ROMs till now,
"
Serial
7%
Upgrade
CE
Completed​" is seen on the screen and it freezes.
and yes, i voted.
I figured out that I was trying to do the wrong thing with mtty1.1.42
and that was not my fault, I exactly did the things that are mentioned.
but a typo or something was there, in wiki, like "On PC type “;task 28 55aa”; as in Technical Stuff wiki page and hit enter. This command suppose to "Restores DOC to its original layout". After you ran the command, you will see "WAIT" and wait until you see the command line “;USB>”;." I removed the bold sections, and now everything seems fine.
PS: It was written & # 8220 (without spaces) instead of ”.
Thank you very much. Thank you. Thanks.
PROBLEM SOLVED
i have same problem..i tried all roms (wm5,wm6).but none of them didn't go about %7.
I opened mtty 1.1.42. then I choose USB and saw blank page,pressed enter
"USB>set 14 0" entered but I saw only
"USB>"
at the end nothing have done
why it stop %7 ?
pls help me.nobody can repair my universal in Turkey.(no pocket pc service)
my problem is :
Serial
7%
Upgrade
CE
Completed
How to resolve flashing issues while installing new rom
I had the same problem on February, and I gave been to that link
http://wiki.xda-developers.com/index.php?pagename=Instructions for those stuck on Boot Screen
and it resolved my problem by following the exact instructions given, and it resurected my Imate JasJar, now I am doing the same operation for installing the Tomal 8.5 special, and I did have encountered the same problem, but fixed it again with that same post.
Go for it, it should work for you. <Instructions for those stuck on Boot Screen> or tap onto google this, it should take yoou there directly
Universal Imate jasjar
Tomal 8.5
Radio 1.15

Need help installing Windows Mobile 6.1 on HTC TOUCH (Vogue)

Hi Everybody. This is my first post here
I own an HTC Touch (Vogue) from Orange (Spain) and I would like to install WM 6.1 on it. Orange does not provide with WM 6.1 and I found on the internet that there is a Sprint version of it, so I decided to install it. I get "Error 270" it says the image is corrupt. I tried to make an splxploit-windows and nothing happens... I took a screenshot (attached file) of what I get... and it stays there. Nothing happens at all.
I tried to install other versions also... HTC Magician and others just to see what happens and always I get "Error 270". The only one I could install successfuly is the Orange Rom
I tried everything and can´t find a solution. Any help there please?
Thanks a lot! =)
PD: I am using Windows XP, ActiveSync 4.5 and in SPLXPLOIT-WINDOWS I am following this steps (I get stuck in step 4)
1) manually start in bootloader mode
2) disable USB in activeSync
3) check 'usb' appears at the bottom of the tricolor screen and that he device is recognized by XP. If not, try unplugging/repluging
4) run the corrected unbrick.bat
5) while still in (new) tricolor screen after loader update, upload a new ROM
Any ideas?
This is not a complaint... this is just how I feel::
It is really frustrating to post something for 1st time in a forum looking for an answer and not to get anything in three days.
Welcome to forums
Have a deep read on Wiki here
Also visit Vouge section.
Read, Search, Respect and Enjoy!

[Q] My asus P320 doesn't start

Hello everybody,
I'm new on this forum , and i search for a long time for my problem.
Someone gave me an asus P320 who has a problem.
Somedays before this person gave me the mobile, he took many photographs with the P320, and suddenly, the mobile has frozen. After a off and on, the asus started with the blue screen ASUS, and suddenly, at the down of the screen, to lines : "TFTP USB DOWNLOAD", "Insert USB cable", and that's all, impossible to cut off the mobile with the on/off button, obliged to remove the battery.
Until this day, when i start the mobile, the same blue screen and the two lines.
Impossible to do anything, the different buttons doesn't react. After some searches, i tried to do a hard reset (volume down button + reset button), but no effect. I tried to do an upgrade of the ROM with a microSD card formatted, and a folder named 2577, downloaded from the asus site,write on the root of the microSD card + hard reset, but nothing else.
Now, i don't know what to do, can someone help me?
thank you for all, (sorry for my english, i'm french)
Hello everybody,
I don't know what to do. Is there any solution to access to the memory of the mobile and delete all photos or something else.
Thank you for your replies
Hello everybody,
Apparently, my mobile phone seems to be down, no suggestion?
thank you
Apparently, nobody has an idea ?
Good luck to everybody,
Hello everybody,
I know many persons have read my post, but nobody has an idea ?
Thank you all,
Moved to Q&A section
Hello orb3000,
Sorry if i was in the wrong section, i'm not very kind with the forums in general.
I have no knowledge in mobiles, any suggestion for my problem,
Thank you
hi der
u should try rom form pdagismo
flash with dat rom
hello uchihasandi,
Thank you for your reply. Can you explain what you mean by "form pdagismo", this sounds like a foreign language, i am totally beginner and i don't know how to handle this curious machine, this asus P320. Thank you to look for my problem,
Wiki
Hello Uchihasandi,
I searched for a ROM from PDAgismo, but i go to a thai forum, and i don't understand thai language, and i don't know how to download this ROM and install it on my P320. If you have some informations, i'll thank you.
Cheers
Hi
I am also having exactly similiar problem. Sof reset failed. Hard reset never goes after "Tap screen message". Upgrade to new ROM failed saying cant find the bin file. I am stuck. Please help urgently
remove the battery , keep it outside for 12 hr . put it back , restart..

Categories

Resources