Arabic language after flashing new rom - HTC ChaCha

im having problem after flashing this rom
ZaSa 4chacha GB1.54 v2.0
now having 2 problems
1
my Arabic messages look like this
ا ل س ل ا م
and cannot find Arabic in language&kayboard
and cannot type in Arabic
2
in calling cannot type 0 it gave me this message
select input method
touch input (selected)
------------------------------------------------------------
any help or how can i revert it back to the old rom

Dear this rom dose not support arabic language just u have to go back for the stock arabic rom which it support full arabic language
Check this link may it help you
http://forum.xda-developers.com/showthread.php?t=1461174
And this link in arabic if u need the steps in arabic
http://www.ce4arab.com/vb7/showthread.php?t=398472

thank you
can you tell me how to get 0 work in calling

what do u mean by 0 calling ?? you mean when you press "0" dose not show "0" or you mean Speed Dial with "0"
If it dose not show "0" Try to press FN + 0
That maybe help you or read this thread carfully maybe you can find the fix there
http://forum.xda-developers.com/showthread.php?t=1343636

i mean when press "0" dose not show "0" and FN + 0 gives me same message
any help

then ask at the below link
http://forum.xda-developers.com/showthread.php?t=1343636

can't do that for now
New members (those with fewer than 10 posts) are not permitted to post to development-related forums
and when press "*" dose not show any thing
i am sorry for asking too much because i prefer this rom with all his problems on old stock rom

I had same problem but i deodexed ruu ASIA 1.57 after that applied patch from below link it worked. but it is consuming more internal memory.. it just left 54mb on first boot.
http://blog.devasque.com/?page_id=11

M.WeWe said:
im having problem after flashing this rom
ZaSa 4chacha GB1.54 v2.0
now having 2 problems
1
my Arabic messages look like this
ا ل س ل ا م
and cannot find Arabic in language&kayboard
and cannot type in Arabic
2
in calling cannot type 0 it gave me this message
select input method
touch input (selected)
------------------------------------------------------------
any help or how can i revert it back to the old rom
Click to expand...
Click to collapse
New arabic rom {1.57} hass been added give it a try.
http://forum.xda-developers.com/showthread.php?t=1500866

Now I am running SuperOSR 2.5 latest it support arabic all you have to do is downloding
ParfieldIME Arabic keyboard v4.0.410
Sent from my HTC ChaCha A810e using XDA

Related

Arabic support for htc s710...???? pls

can anybody help me with arabic support for the HTC S710...if only for reading the SMS
Try this: http://ae.inc.ru/aekmap.php
Read upon it. The website contains all info for creating national layouts. Once you make your arabic layout you will be able to input in practically any application on you S710.
i didnt anderstand any.... can u help me more
Did you add arabic support to your phone?
how can we ?
maybe you should try installing the Arab ROM. It's available here.
hi
here is a progrom works fine to read arabic and persian on htc s710
I got it from Dr. Martin Gonzo's rom
install the attached .cab file
http://rapidshare.com/files/98537421/SmartArabizerLoc.zip.html
If you have a problem to read inbox messages after install go to IE and set: menu-tools-options-general-encoding-Unicode(UTF-8)
special thanks to DR. Gonzo.
and how can we write arabic ?
It it my problem too!
I'm working on it
Here are the original t9 files from the arabic rom. I don't remeber if they are installed by the arabic cab too of if it just allows to read arabic.
I've also included the english drivers because if I remember correctly drivers from other roms where not compatible with these
Also here are I think all the registry keys involved
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Tegic]
[HKEY_LOCAL_MACHINE\SOFTWARE\Tegic\eT9]
"InstallFolder"="\\windows"
"AvailableLanguages"="0109,0101,010C"
"ShowExactKeyStrokeThreshold"=dword:00000000
"DefaultLanguage"=dword:00000101
[HKEY_LOCAL_MACHINE\SOFTWARE\Tegic\eT9\IME]
"TextInputMode"=dword:00000001
"DefaultInputModule"=dword:00000001
[HKEY_LOCAL_MACHINE\SOFTWARE\Tegic\eT9\IME\KdbDlls]
"000107FF"="eT9.HQD.Libra.kdb.dll"
"00010701"="eT9.HQD.Libra.Arabic.kdb.dll"
"00010601"="eT9.Dis.9Keys.Arabic.kbd.dll"
"00010609"="eT9.Dis.9Keys.English.kbd.dll"
"0001060C"="eT9.Dis.9Keys.French.Kbd.dll"
[HKEY_LOCAL_MACHINE\SOFTWARE\Tegic\eT9\IME\KeyboardLayouDlls]
"000007FF"="eT9.Vox.0409.kmap.txt"
"00000701"="eT9.Vox.0401.kmap.txt"
[HKEY_LOCAL_MACHINE\SOFTWARE\Tegic\eT9\IME\LanguageKeyboardIDMapping]
"0101"="0701"
"*"="07FF"
[HKEY_LOCAL_MACHINE\SOFTWARE\Tegic\eT9\InputModuleDlls]
"1"="eT9DisInput.dll"
[HKEY_LOCAL_MACHINE\SOFTWARE\Tegic\eT9\LdbDlls]
"0109"="eT9.English.Ldb.dll"
"0101"="eT9.Arabic.Ldb.dll"
"010C"="eT9.French.Ldb.dll"
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
"3PartyIME"=dword:00000001
You could try to build a cab out of it.
Sorry I don't have the time to do it but I thought I could throw a quick help.
Dr. Martin Gonzo said:
Here are the original t9 files from the arabic rom. I don't remeber if they are installed by the arabic cab too of if it just allows to read arabic.
I've also included the english drivers because if I remember correctly drivers from other roms where not compatible with these
Also here are I think all the registry keys involved
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Tegic]
[HKEY_LOCAL_MACHINE\SOFTWARE\Tegic\eT9]
"InstallFolder"="\\windows"
"AvailableLanguages"="0109,0101,010C"
"ShowExactKeyStrokeThreshold"=dword:00000000
"DefaultLanguage"=dword:00000101
[HKEY_LOCAL_MACHINE\SOFTWARE\Tegic\eT9\IME]
"TextInputMode"=dword:00000001
"DefaultInputModule"=dword:00000001
[HKEY_LOCAL_MACHINE\SOFTWARE\Tegic\eT9\IME\KdbDlls]
"000107FF"="eT9.HQD.Libra.kdb.dll"
"00010701"="eT9.HQD.Libra.Arabic.kdb.dll"
"00010601"="eT9.Dis.9Keys.Arabic.kbd.dll"
"00010609"="eT9.Dis.9Keys.English.kbd.dll"
"0001060C"="eT9.Dis.9Keys.French.Kbd.dll"
[HKEY_LOCAL_MACHINE\SOFTWARE\Tegic\eT9\IME\KeyboardLayouDlls]
"000007FF"="eT9.Vox.0409.kmap.txt"
"00000701"="eT9.Vox.0401.kmap.txt"
[HKEY_LOCAL_MACHINE\SOFTWARE\Tegic\eT9\IME\LanguageKeyboardIDMapping]
"0101"="0701"
"*"="07FF"
[HKEY_LOCAL_MACHINE\SOFTWARE\Tegic\eT9\InputModuleDlls]
"1"="eT9DisInput.dll"
[HKEY_LOCAL_MACHINE\SOFTWARE\Tegic\eT9\LdbDlls]
"0109"="eT9.English.Ldb.dll"
"0101"="eT9.Arabic.Ldb.dll"
"010C"="eT9.French.Ldb.dll"
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
"3PartyIME"=dword:00000001
You could try to build a cab out of it.
Sorry I don't have the time to do it but I thought I could throw a quick help.
Click to expand...
Click to collapse
Hi Dr Gonzo
I changed the values but arabic type is not possible
If I install Dr Gonzo's ROM can I type Arabic then?
Dr Gonzo
Please Do something for us , we really need this language .
Sorry to interrupt guys,
Just want to know if someone of you could read arabic sms on HTC S710.
Thx in advance.
De.Gonzo
Please i flashed with one of your great roms but i lost arabic can you help where i can find the offical w6 arabic rom to go back.
I realy apprecheat your help on that
For those of you who are having problems reading messages (get blank messages) after installing and enabling a language pack:
Details follows... skip to the last if you do not want to bother.
First understand that the inbox uses HTML to display your messages, therefore, the settings for the display are located in IE and not in inbox itself.
When you install the language pack (arabic here), the encoding will be set to correspondent installed language, but that's no good as inbox will fail to decode the message header and it will show an empty message.
to solve this, set the option menu->tools->options->general->Encoding to Unicode(UTF-8) in Internet Explorer *AFTER* you setup the language, enable it, and restart.
After you change the encoding option, you must restart the messaging application (or the phone if you don't know how to stop an application).
After that, you will be able to view the messages in inbox and in the proper encoding.
thanx ppczouz, it worked for me. but as u know, arabic is right-to-left language. now it's left-to-right and each letter appears seperate. for example : the word "اهلا" appears "ا ل ه ا"
i dont know if u get my point or not !!!!!
ARA ROM
Hi,
why you do not simply install the ARA ROM?
One reason for not installing Arabic ROM is having WM6.1 installed.
Sadek, the Arabic ligature should work properly. Since they are not working, I assumed that you did not install the CAB mentioned above.
Here it is again
http://rapidshare.com/files/98537421/SmartArabizerLoc.zip.html
star80
dear
i need ur mobile no. or ur email
thanks
dear mr: star80
can u send me plz
[email protected]

Arabic Rom

I Need Arabic rom
I got mine from dubai and it had a english rom. So I don't think there is a arabic rom. Didn't I-Mate only support Arab??
Yes, my TyTN II, purchased here in Muscat, was packaged for sale in the Middle East and it has a WWE ROM
And no bundled GPS software but that makes sense as Middle East GPS maps for WM PDAs does not seem to be available from any GPS vendor. (Probably has something to do with the war in Iraq...)
As far as I know only i-mate offer WM PDAs with support for Arabic.
Head to this link for full instructions on how to install Arabic to you phone
Click Here
Tytn II is to be launched in Egypt at the end of november, Sales manager in the HTC dealer in Egypt confirmed that it will have arabic and arabic keyboard too. I hope so.
I am waiting for it to buy.
Regards
mo7al said:
Head to this link for full instructions on how to install Arabic to you phone
Click Here
Click to expand...
Click to collapse
Can anybody translate these instructions to English.I need it for a friend.
Here is a quick translation.
Basiclaly the page goes through all the usual things of upgragin, Hard Reset etc.
In point no 8 it talks about installing the Arabic Plugin..
<<<<<TRANSLATION STARTS>>>
8- Arabisation Files Numbered - Full "In my Pocket" Arabisation with Keyboard Activation (Thanks to E.Engineer)
[Screen Shot]
>>>>>>NEW>>>>
Download the following file:
http://www.ce4arab.com/vb7/redirector.php?url=http://www.xda3.com/f/get.php?filename=1194528617.rar
un-zip in any location on the memory card, you will get a file called "Autorun"
execute and install in the internal memory
[2 screen shots]
Second copy containes the Holy Qur'an
http://www.ce4arab.com/vb7/redirect...hared.com/file/28748330/246a9862/autorun.html
To activate the external keyboard, choose Arabic from the screen to write in Arabic or English keyboard for writing in English
<<<<<END OF TRANSLATION>>>
Note that you will need to select Unicode from SMS options as arabic letters are considered unicode.
Hope this helps
B
Arabizing your current ROM
After you download the "autoRun" file from the following link, http://www.ce4arab.com/vb7/redirecto...1194528617.rar
extract it and copy it to your SD card. But when installing make sure you install on your device. There are four programs in this file. When prompted to install, do install all, but again make sure to install onto the Device... Not the Sd card.
After all installed, you can remove the program/s that you do not need.
It is recommended to do a Soft Reset after the installation is completed.
The Alarm days abbreviations could show in Arabic, to change back to English ( Latin Letters ) you need to go to
Start/Settings/System/In4Mobility and change your location language to English USA. This change will still enable you to write and receive SMS in Arabic.
Good luck.
Does this enable external keyboard to type Arabic? because since i have change my ROM the QWERTY keyboard is English even after installing FJE the QWERTY keyboard is english
Arabic Rom available
dear all the original rom i had on my kaiser was with arabic and it is even with arabic keyboard, but unfortunatily i lost the rom when i tryed the coocked ones and i realy feel sorry about it.
the rom info was:
ROM VERSION: 1.81.415.4 WWE
ROM DATE: 29/10/2007
ROM VERSION: 1.27.15.32
PROTOCOL VERSION: 22.51.88.13H
regards,
Ramzi
prayer time
I got my TyTN II in Egypt but I had to stop the extended rom installation (including FGE) coz it stops the GPS functions .. I installed FGE from this link and it works fine but the Prayer Time program doesn't go off at prayer times .. any ideas ?
Ramzi thanks but i need you to confirm if this program posted here makes QWERTY work for arabic typing
lover said:
Ramzi thanks but i need you to confirm if this program posted here makes QWERTY work for arabic typing
Click to expand...
Click to collapse
yes my dear,
if you follow the link listed previously you can downloud the arabic to your kaiser along with outside keybord arabic typing.
regards,
ramzi
Arabizing HTC Kaiser
chech this out
http://rapidshare.com/files/78463745/arabic_HTC_with_quran.rar.html
regards,
ramzi

[Q] HTC Chacha was able Arabic ?

Hi All
I want to know the HTC Chacha was able to write or read Arabic language ? For example you try to open this site and show me what you seen . ( with Android browser or Firefox or UC or...)
And is "input method" enable on Chacha when you want to write a message ? ( for install Arabic keyboard )
And I want to know is possible to map Chacha keyboard to another language ? for example you press "D" bottom and wrote "ی" ?
saeidonline said:
Hi All
I want to know the HTC Chacha was able to write or read Arabic language ? For example you try to open this site and show me what you seen . ( with Android browser or Firefox or UC or...)
And is "input method" enable on Chacha when you want to write a message ? ( for install Arabic keyboard )
And I want to know is possible to map Chacha keyboard to another language ? for example you press "D" bottom and wrote "ی" ?
Click to expand...
Click to collapse
Why is not any answer ?
With the latest OTA update yes you can read arabic perfectly... I haven't tried writing though...
yoicks said:
With the latest OTA update yes you can read arabic perfectly... I haven't tried writing though...
Click to expand...
Click to collapse
Can use other input method ? Such as "Anykeyboard"
Yes, sure you can ... yesterday i got one from Nasa (nasa4ppc . com) (Middle East Version) with full arabic Keypad. you can read & write ...
Really it's excellent device .. I love this ChaCha
Just tap into the "text input" for two seconds till yo see " copy , past , input method "
then chose input method. finally, chose the desire language
for Arabic >> chose : Arabic keyboard
for English >> chose : touch input
In Arabic keyboard you can swap easy between Arabic and English language.
Android phones in Canada do not support the Arabic language for some reason. The letters are all disjointed which makes it really hard to read.
I'm waiting for HTC to unlock the boot loader so I can download an Arabic ROM for it!
Edit: I recently found out that Sony Ericsson supports reading and writing in Arabic. It's the only company to do so in Canada......... for now!!!!!
You Have Lots Of Ways
Well,you can use several keyboards.like Persian Soft keyboard and Smart Keyboard Pro.
They both support QWERTY keyboard, But I suggest you PERSIAN SOFT KEYBOARD which supports Arabic & Persian as it's name goes so.

[Q] Request Regarding Arabic Language

My ChaCha doesnt read the arabic language correctly, its viewed in separated letters, my Phone is S-On but i recently Unlocked the Bootloader using the HTC Dev website and i installed the ClockWork Recovery and rooted it.
Is there a way to enable the arabic thing for S-on rooted ChaCha
Thnx in Advance
Search in the fourm for arabic rom and install it on ur chacha
Sent from my GT-N7000 using XDA App
should i choose any ROM or would u recommend one for me i want a stable working ROM if u please and if u know how to Flash it cause i am new to flashing roms
based on Arabic stock rom..
http://forum.xda-developers.com/showthread.php?t=1500866
faizkalwar said:
based on Arabic stock rom..
http://forum.xda-developers.com/showthread.php?t=1500866
Click to expand...
Click to collapse
I have just flashed the ROM in the above link, still can't write Arabic, when i choose Arabic input it writes English, please advise i don't know what's wrong
N.B: i tried to post a reply on your original post but couldn't as it's in the developers area.
gama667 said:
I have just flashed the ROM in the above link, still can't write Arabic, when i choose Arabic input it writes English, please advise i don't know what's wrong.
Click to expand...
Click to collapse
use go keyboard
"arabic for go keyboard" and "go keyboard"
i hope it ll solve your problem
faizkalwar said:
use go keyboard
"arabic for go keyboard" and "go keyboard"
i hope it ll solve your problem
Click to expand...
Click to collapse
thanks yes problem solved

[Q] Language Problem on miui blend edition

http://roms.htcmania.com/filtro.php?r=821
this link is of rom - [HOME] [MIUI] Extrem Apside OC Tribute Android 2.3.7 (Gingerbread)
Kernel :- BlendMIUIjasonstein @ ubuntu 2.6.39-OC 1.6 ghz
now the only problem with this rom is Language ,,, this rom only serves me spanish n i m an indian so i caN ONLY understand english
Soo is there any way to change the language ,,,, but remember not aftr installing the rom coz there is no option to change language it shows only n only spanish language in language n input settings
soo plz suggest me any method from tht i can add language directly in the system but,,,, but without compromising any of its features
help dev's help u all dev's are genius soo plz modified the language n put a new thread in neo v development or suggest me any way to doo it!!!!!!!!!!!!!
:crying:
Any 1 in this site plz help meee
Sent from my Xperia Neo V using xda premium
Hi,
Have you found the solution for this issue (except finding another rom ;-p) ? I have same problem - lack of english language and only spanish language to choose in locale selection window. Any rom/framework modification?

Categories

Resources