Database Info

Want dream/sapphire proprietary files

In all tutorials I found this lines:
cd ~/android/system/device/htc/dream_sapphire/
./extract-files.sh
But i haven't ANY files in this directory(including this scipt). Can you upload for me all folder? I think about /android/system/device/htc/dream-sapphire/.
Thanks!

The command "extract_files.sh" will extract those files from your phone, but you need to have the phone connected via USB with your PC.
Before trying, you should check whether your adb connection with your phone is working.
Sent from my Gingerbread on Dream using XDA

ADB working for me, If I navigate to platform-tools:
[email protected]:~/sdk/platform-tools$ ./adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
But if I am In dream_sapphire folder, terminal show only that extract-files.sh not found:
bash: ./extract-files.sh: No such file or directory

From which sources do you want to build? For ezGingerbread for example the "extract-files.sh" is located in "~android/device/htc/sapphire".
Btw. adb devices should give you a list of connected devices. If that is empty (as you posted) something is not working correctly.

CyanogenMod sources. List of devices is not empty, my phone is present here but I found no need to paste this line.
Sorry, but I'm green in this. I want to learn some about building android. I follow this:
http://wiki.cyanogenmod.com/wiki/HTC_Dream_&_Magic:_Compile_CyanogenMod_(Linux)
But i type
repo init -u git://github.com/CyanogenMod/android.git ics
instead of
repo init -u git://github.com/CyanogenMod/android.git -b froyo-stable

dream/sapphire is not supported by CM7/CM9 and that's the reason you do not have the directory/files you are expecting. If you only want to get the proprietary files, you can also switch to an older release (e.g. CM6) for that project, but nevertheless you need to change several other things, too, before you will get a build. If you are not familiar with building from sources, I suggest you to start with something easier, i.e. CM6 or ezGingerbread.

Or you could run repo init from anddisa's or my git repos. I don't know his from memory but for mine you would run
Code:
repo init -u https://github.com/tvall43/android.git -b ics-ds
AndDiSa's might be a little better right now but I hope to eventually get mine running something close to stable if possible.
The latest version of cm with the dream/sapphire stuff is cm7 (even though they dropped support). Anything past that you'll have to port yourself (like AndDiSa and I) or wait for someone to.
Also, I'm half asleep. I could have (and likely did) post errors that I didn't notice. Google is your friend.

tvall said:
Or you could run repo init from anddisa's or my git repos. I don't know his from memory but for mine you would run
Code:
repo init -u https://github.com/tvall43/android.git -b ics-ds
AndDiSa's might be a little better right now but I hope to eventually get mine running something close to stable if possible.
The latest version of cm with the dream/sapphire stuff is cm7 (even though they dropped support). Anything past that you'll have to port yourself (like AndDiSa and I) or wait for someone to.
Also, I'm half asleep. I could have (and likely did) post errors that I didn't notice. Google is your friend.
Click to expand...
Click to collapse
OK, I just downloaded your repo. But...
Command:
lunch cyanogen_dream_sapphire-eng
Returns:
[email protected]:~/android/system$ . build/envsetup.sh
including device/htc/dream_sapphire/vendorsetup.sh
including vendor/cm/vendorsetup.sh
[email protected]:~/android/system$ lunch cyanogen_dream_sapphire
Invalid lunch combo: cyanogen_dream_sapphire
[email protected]:~/android/system$ lunch cyanogen_dream_sapphire-eng
vendor/htc/dream_sapphire/dream_sapphire-vendor-blobs.mk:46: *** missing separator. Stop.
Device dream_sapphire not found. Attempting to retrieve device repository from CyanogenMod Github (http://github.com/CyanogenMod).
Found repository: android_device_htc_dream_sapphire
Adding dependency: CyanogenMod/android_device_htc_dream_sapphire -> device/htc/dream_sapphire
Traceback (most recent call last):
File "build/tools/roomservice.py", line 170, in <module>
add_to_manifest([{'repository':repo_name,'target_path':repo_path}])
File "build/tools/roomservice.py", line 121, in add_to_manifest
f = open('.repo/local_manifest.xml', 'w')
IOError: [Errno 2] No such file or directory: '.repo/local_manifest.xml'
vendor/htc/dream_sapphire/dream_sapphire-vendor-blobs.mk:46: *** missing separator. Stop.
** Don't have a product spec for: 'cyanogen_dream_sapphire'
** Do you have the right repo manifest?
And next, command:
[email protected]:~/android/system$ mka bacon
Returns:
make: *** No rule to make target `bacon'. Stop.
How to fix this?

Anybody can't help me?

blaster44 said:
Anybody can't help me?
Click to expand...
Click to collapse
Only CM uses the "make bacon" command. Unless they use the CM repo tool in their repo, it will be unavailable. Same goes for AOSP.
Sent from my HTC PH39100 using Tapatalk 2

[Script] repo-mm: gerrit-mirror.sh - Gerrit project mirroring script [06/30/2013]

Hello xda,
I had a little time on my hands the other night, and wanted to figure out a way that I could work on any of the project repositories needed to build say, aokp, cyanogenmod, aosp, etc... without having to connect to the internet.
Mirroring is not new. Simple enough to:
Code:
mkdir cm-mirror
cd cm-mirror
repo init -u git://github.com/CyanogenMod/android.git -b cm-10.1 --mirror
repo sync -j[dl-jobs]
then create a working directory:
Code:
cd ..
mkdir cm-work
cd cm-work
repo init -u file:///Volumes/Android/cm-mirror/CyanogenMod/android.git --reference /Volumes/Android/cm-mirror/ -b cm-10.1
repo sync # no jobs needed. super fast.
But at this point you only have what you need for cm-10.1. What if you also have work you are doing for 10.1.0? Or an old update to make for cm-7.2.0?
I originally started looking for a solution to sync every branch in the manifest one at a time, but while talking with cdesai he showed me a really clean way of getting the repositories directly from gerrit.
Anyways, here is the resulting script. Let me know your thoughts.
I've moved the script to a git repository here: https://github.com/bhundven/repo-mm
in case anyone wants to contribute.
I've also written a post on my blog about using the new gerrit-mirror.sh on gh.

ChangeLog
Changes:
[06/30/13]: Announce some updates to gerrit-mirror.sh, and blog post.
[06/24/13]: Moved gist to github project.
GitHub for repo-mm.

Building a rom...

i' m following a guide to try builiding my first rom and i don't understand a step
"6. After the repo sync finally finishes, all you need to do is add your device, kernel, vendor specific files for the device you are building for."
Where can i find these things? Is there a command i should give in the terminal?
I've searched a little but not found anything...any hint would be accepted!

tylpica wives
phoenixita said:
i' m following a guide to try builiding my first rom and i don't understand a step
"6. After the repo sync finally finishes, all you need to do is add your device, kernel, vendor specific files for the device you are building for."
Where can i find these things? Is there a command i should give in the terminal?
I've searched a little but not found anything...any hint would be accepted!
Click to expand...
Click to collapse
What rom are you building? If CM10.1 or CM10.2 just follow the instructions on
wiki.cyanogenmod.org - w - Build_for_ville
(sorry, cannot post the link since I don't have enough posts Just replace - with /)
I guess your point 6 refers to items 2.7-2.9 where prebuilt apps, device-specific code (e.g. kernel etc.) and other
proprietary drivers are copied to your source code.
To init for CM10.1, use
repo init -u git://github.com/CyanogenMod/android.git -b cm-10.1
for CM10.2 use
repo init -u git://github.com/CyanogenMod/android.git -b cm-10.2
Hope this helps. good luck

drkxyz said:
What rom are you building? If CM10.1 or CM10.2 just follow the instructions on
wiki.cyanogenmod.org - w - Build_for_ville
(sorry, cannot post the link since I don't have enough posts Just replace - with /)
I guess your point 6 refers to items 2.7-2.9 where prebuilt apps, device-specific code (e.g. kernel etc.) and other
proprietary drivers are copied to your source code.
To init for CM10.1, use
repo init -u git://github.com/CyanogenMod/android.git -b cm-10.1
for CM10.2 use
repo init -u git://github.com/CyanogenMod/android.git -b cm-10.2
Hope this helps. good luck
Click to expand...
Click to collapse
I'm trying to build another rom not CM but i'm trying following the 2.7-2.9 steps from your link

What
Building from source or MOD ROM?

xdluisssxd said:
Building from source or MOD ROM?
Click to expand...
Click to collapse
i think i'm building it from source lol

(GUIDE) making ROM from source without DATA loss

if u dont have internet connection to make a ROM this guide is for you and you dont need to have download for GB's of file
first im taking carbon ROM for example
1.You will need to set up some directories in your build environment:
To create them run:
mkdir -p ~/bin
mkdir -p ~/carbon
2.Install the Repository
Enter the following to download the "repo" binary and make it executable:
curl http://commondatastorage.googleapis.com/git-repo-downloads/repo > ~/bin/repo && chmod a+x ~/bin/repo
You may need to reboot for these changes to take effect. Now enter the following to initialize the repository:
cd ~/carbon
Repositories:
Before you continue --> run this in the terminal:
repo init -u https://github.com/CarbonDev/android.git -b kk
3.now open carbon folderand press ctrl + H if u see .repo folder u can continue to next
repo sync --> firsy sync for 5mins to load the folder and then stop syncing by closing terminal
4.after that see the manifest.xml with notepad or any suitable one and you can see link for the packages EXAMPLE: android_art search in the cyanogenmod or in which u want to build
5.im sharing link database of packages for building carbon rest u have the job to search and typer in github
package which to be downloaded for carbon ROM is here http://d-h.st/zru
6.after making source proper --> Building the System --->>>Initialize the environment with the envsetup.sh script. Note that replacing "source" with a single dot saves a few characters, and the short form is more commonly used in documentation.
. build/envsetup.sh
lunch
Enter the number of the build you want to start and press enter:
make carbon -j7 = Run Squisher/Run Opticharger
make otapackage -j7 = No Squisher/No Opticharger
optional --> Submitting Patches
Patches are always welcome! Please submit your patches via CarbonDev Gerrit! You can do this by using these commands:
Setting up for repo upload: (run these commands once)
git config --global review.review.carbonrom.org.username <Your username registered at CarbonDev gerrit>
git config --global review.review.carbonrom.org.email <Your email registered at CarbonDev gerrit>
(From root android directory)
. build/envsetup.sh
repo start kk .
(Make your changes and commit)
repo upload .
Note: "." meaning current directory For more help on using this tool, use this command: repo help upload
Make your changes and commit with a detailed message, starting with what you are working with (i.e. vision: Update Kernel) Commit your patches in a single commit. Squash multiple commit using this command: git rebase -i HEAD~<# of commits>
To view the status of your and others' patches, visit EAMPLE:Carbondev Code Review
if you want to build :
CYANOGENMOD -->do steps upto initialisng repo ------------https://github.com/CyanogenMod/android
OMNIROM -->do steps upto initialisng repo ------------https://github.com/omnirom/android
CARBON -->do steps upto initialisng repo ------------https://github.com/CarbonDev/android
dont click thanks if i helped you because thanks button is gonna damage
CREDITS:
---------> Ramsudharsan madhavan for teaching me
---------> Guru sanjay my friend helping me to download
---------> and me for thinking this idea in my school time

Goin gud. keep it up.

Awesome man!
Worth for Portal!
Sent from my Xperia Sola using XDA Premium 4 mobile app

Nevermind.

TWRP Touch not working (moto g 5g). How to fix it?

There is no twrp for "moto g 5g" yet, but the source was available.
https://github.com/moto-sm7250/android_device_motorola_kiev/tree/android-10
You can download the code from here.
I downloaded the code from here and placed it in /twrp/device/motorola/kiev
Code:
repo init -u git://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni.git -b twrp-10.0
repo sync
Code:
make clean
. build/envsetup.sh
export LC_ALL=C
lunch omni_kiev-eng
make -j4 recoveryimage 2>&1 | tee twrp_$(date '+%Y%m%d_%H-%M-%S').log
This was the first time I built a twrp.
I used bbqlinux in VirtualBox.
The build was somehow successful.
I was able to control it with otg.
However, the touch does not work.
How can I fix this?