Has anyone successfully been able to setup a DYDNS client on their phone while using Tmobile? The three apps I have tried without luck are
1) Dynamic Dns Updater (meesa)
2) Dynamic DNS client (Neil Boyd)
3) DynDNS client (Neil Boyd)
Related
Hey Guys,
I was wondering if any one knows if there is a Cisco VPN client for wm6 or some other 3rd party VPN client that is compatible with Cisco 3000 series?
I also is there an RSS feed reader that can display the news from BBC on today's screen.
shazaani said:
Hey Guys,
I was wondering if any one knows if there is a Cisco VPN client for wm6 or some other 3rd party VPN client that is compatible with Cisco 3000 series?
I also is there an RSS feed reader that can display the news from BBC on today's screen.
Click to expand...
Click to collapse
The built-in L2TP/IPSec VPN client is compatible with the Cisco 3000 VPN Concentrator, but you need to setup the concentrator correctly to support it. It's a double bonus though as the setup for it to support the Windows Mobile L2TP/IPSec VPN Client is also applicable for the native Windows 2000+ L2TP/IPSec client, so you don't have to install the Cisco VPN Client on the PC's. The VPN Client in Windows Mobile is a bit temperamental though, especially on the Wizard, so there is a downside...... The 5.2.1437 ROM seems to be the most stable so far.
For RSS Feeds I am using JeyoInformer. This has an option to be displayed on the Today screen however I haven't used it too much, I just included it in my ROM build. There is a default XML file that it used and this has BBC's RSS news feed included.
HTH
Andy
Awesome! Thank you for the info. I will test is using the native VPN client. Will post the results.
So apparently the VPN that I need to connect to only uses L2TP/UDP where as the built in native VPN client uses PPTP or L2TP/IPSec. Any ideas if there is a VPN Client for Windows Mobile that uses L2TP/UDP?
shazaani said:
So apparently the VPN that I need to connect to only uses L2TP/UDP where as the built in native VPN client uses PPTP or L2TP/IPSec. Any ideas if there is a VPN Client for Windows Mobile that uses L2TP/UDP?
Click to expand...
Click to collapse
No, the setup on the VPN Concentrator is wrong, or at least not setup for L2TP/IPSec VPDN. If it is already setup and your network admin doesn't want to reconfigure it then you will have to get an alternative VPN client.
Some details here, however I used RSA Signatures instead of pre-shared keys but this requires certificates.
http://www.cisco.com/en/US/partner/...s_configuration_example09186a0080094aca.shtml
VPN 3000 configuration guides here: http://www.cisco.com/en/US/partner/...284/tsd_products_support_eol_series_home.html
HTH
Andy
How with the built-in VPN client does one specify the Cisco VPN 'group name'?
On linux I have a vpnc client functional, but to connect I need to be able to give the client the following:
vpn host
user
password
group name -- where do I put this in??
group password --I put this in as the IPSec/L2TP pre-shared key, of course in it's non-encrypted form via http://www.unix-ag.uni-kl.de/~massar/bin/cisco-decode -- is this correct?
old post, but I have the same question. My VPN requires a group name and group password (both of which I have) but the built wimo setup doesn't ask me for either.
hello
for group name and pass auth. you need to use anthavpn or bluefire sec. clients. but both not free
Is there away to install CISCO VPN Client on the universal device? instead of using MS client which I don't trust it as everyone does
If there's away please let me know how and where I can download the .cab file.
try this
AnthaVPN
http://www.anthasoft.com/index.php
I use this one (connection to a Cisco PIX):
http://www.ncp-e.com/
you can also try SSL vpn (web vpn) or anyconnect client.
What's wrong with the integrated VPN client
The integrated VPN client in Windows Mobile 6/6.1 is a standards based client, I don't know why you wouldn't want to use it? I currently have Cisco IOS Routers & PIX Firewalls configured to work with the integrated VPN client in Windows 2000/XP/2003/Vista as well as Windows Mobile 6/6.1. I have disabled the PPTP stuff on the Cisco devices and only use the L2TP/IPSec with 3DES but it all works perfectly.
It took a while getting it working effortlessly but it does now Setup on the Client side is simple and easily supported - no worrying about 3rd party apps, I can't complain about any of it (not now anyway, at the time of testing and getting it all working might have been a different story.....).
Plus Cisco don't have a Windows Mobile VPN Client?
Andy
VPN Client
ADB100 said:
The integrated VPN client in Windows Mobile 6/6.1 is a standards based client, I don't know why you wouldn't want to use it? I currently have Cisco IOS Routers & PIX Firewalls configured to work with the integrated VPN client in Windows 2000/XP/2003/Vista as well as Windows Mobile 6/6.1. I have disabled the PPTP stuff on the Cisco devices and only use the L2TP/IPSec with 3DES but it all works perfectly.
It took a while getting it working effortlessly but it does now Setup on the Client side is simple and easily supported - no worrying about 3rd party apps, I can't complain about any of it (not now anyway, at the time of testing and getting it all working might have been a different story.....).
Plus Cisco don't have a Windows Mobile VPN Client?
Andy
Click to expand...
Click to collapse
I'm using it exactly the same way you just mentioned above, but when I look to iPhone comes with CISCO VPN client built-in so I suspect that there's one available for CISCO so I specify which tunnel name and so on since I designed different tunnels with different access levels. So if we deployed to the entire company will not meet company’s min. standard security to segregate or have different access level per tunnel.
I know that CISCO doesn’t have client as of yet for WM.
ynagy said:
I'm using it exactly the same way you just mentioned above, but when I look to iPhone comes with CISCO VPN client built-in so I suspect that there's one available for CISCO so I specify which tunnel name and so on since I designed different tunnels with different access levels. So if we deployed to the entire company will not meet company’s min. standard security to segregate or have different access level per tunnel.
I know that CISCO doesn’t have client as of yet for WM.
Click to expand...
Click to collapse
You can have different access levels with the built-in VPN client, its all in the configuration of the back end though with your access servers and the authentication servers (Radius/Tacacs). Using a proprietary client seems to defeat the object of open standards doesn't it? Plus it's something else to support (and go wrong..)
My 2cents..
Andy
I am using SSL VPN .
Easy way to acess:
- WEBMAIL
- FileShare.
I am using the ASA 8.x version , wich presents a ver nice web page for mobile devices.
SSL VPN
I have a ASA55xx ver. 8.xx as well I like that, I think I should enable it and will do the trick without CISCO VPN Client
SSL VPN
I have enabaled SSL VPN on my ASA55xx and is working like sharm , I like it.
Thank you eveyone.
They provide that now.
Has anyone figured out how to get the Work URL Exceptions to work? I have both my private IP Addresses (192.168.0.*) and my domain (*.mydomain.com/*) listed. I am using PPTP VPN, but it only works for Exchange ActiveSync. I am trying to get it to start the VPN Connection for other program such as RDP, or Internet Explorer with no luck. I even tried to RDP into the VPN server, but was not successful either.
Hi all,
is there a place on our Android phones where I can set the DNS suffixes to change 'pc' and 'm' to 'pc.com' and 'm.com' for my inTRAnet only?
I've setup an inTRAnet at home using IIS 5.1 on Windows XP sp3.
I have NO server OSs available.
So NO DNS nor WINS server are avaialble.
All three of us at home have pcs. With a few more around the house.
I've setup each pc to use Simple DNS server to redirect 'pc.com' to my IIS 5.1 server. (via Preferred DNS server in Tcp/IP settings on each PC)
I also had to set the 'Append these DNS suffixes' in Advanced TCP/IP setting | DNS by adding 'com' on each PC to suffix
pc.com is where I have a web page for family notes, schedules, reminders, etc.
All three of us at home have Android phones.
I've setup each pc to use Simple DNS server to redirect 'm.com' to my IIS5.1 server. (again via Preferred DNS server in Tcp/IP settings on each PC)
My pcs take Advantage of the previously setup TCP/IP setting | DNS | 'com' to change 'm' to 'm.com.
m.com is where I have mobile formatted web pages for the same type of info.
I've set each mobile to use the Simple DNS Server using Wi-Fi Settings | advanced | DNS 1.
both pc.com and m.com work on all our mobiles.
is there a place on our Android phones where I can set the DNS suffixes to change 'pc' and 'm' to 'pc.com' and 'm.com' for my inTRAnet only?
Like I did on our PCs?
A hyperlink to a step-by-step process would be preferred as I have no experience in command level settings etc. on androids.
Or perhaps an Android app?
Thanks for your time reading this post.
And thanks in advance for any positive constructive and verbose assistance.
All my best,
Barry G. Sumpter
I'm not sure i understand your problem?
You could edit
"/system/etc/hosts"
to change what the addresses get resolved too.
Could set m and pc to be resolved to your servers intranet ip.
Thanks for the reply.
I've already changed the Hosts file on the android using the Android app:
Hosts Edit
But neither m nor pc are getting resolved to 192.168.1.6
Unless I'm not getting the entries correct:
Ip Address: 192.168.1.6
Host Entries: m
Ip Address: 192.168.1.6
Host Entries: pc
All android browser are just searching google for m or pc.
Any other suggestions from anyone?
Also, that list is absolutely huge!
about 10,000 entries. Exagerated.
I was trying to find my entries but gave up since there is no search on that app.
I'm trying to run a VPN server using Servers Ultimate Pro. I can't figure out how to use personal certificate and key instead of the default ones.
Anyone can help?
Thanks