Database Info

Safe Mode on G1

From androidcommunity.com, not sure how useful.
found a way to enter "safe mode" which will bypass the initial gmail signin and allow you to straight to the good stuff with out activating via google. You can also bypass the security drawing pattern.
1. Power off your device
2. While device is powering back on press and hold the "menu" key, keep holding it past the G1 and android splash screen.
Phone will boot all the way to the main screen and display "safe mode" in lower left corner.
I have confirmed that data is still fully operational and all of my downloaded programs.
http://androidcommunity.com/forums/f41/g1-safe-mode-2565/

Which firmware are you running? I'm on ota rc30 and I can't repro. I wonder if this was fixed in an update.
I should say, I can get into safe mode, but I can't get past the initial google sign-in screen.

Bypassing Google Activation is not Possible in any Version
Bypassing the Drawing Pattern was Patch in RC30
For for RC30 user they are out of luck.

hetaldp said:
Bypassing Google Activation is not Possible in any Version...
Click to expand...
Click to collapse
Shouldn't it help to start the phone with non T-mobile sim card?

Why u require to bypass Activation Process
You can Unlock the Phone and add your GPRS Setting and Activate the Phone Officially on your Carrier.

Well... Don't you still need valid T-mobile sim-card for the first boot after unlocking?
The real reason is, I tried to use my G1 without G1 data plan (-$25 cheaper . It was Ok, I could use WiFi for internet, but I made a factory reset and was not able to pass that activation after - can not use WiFi for that.

You require Valid TMobile SIM only for Activation becuase GPRS Setting Preset in Phone.
But if you have Any other Non TMobile SIM Card Press Menu Button this will popup APN Setting Just Press it again Press Menu Button this will popup New APN Just Add your Carrier APN, Mobile Country Code and Mobile Network Code And reboot. If you can see G or E or 3G on top Bar your Data is Activated Just follow with your Google A/c and Password and you did it

hetaldp said:
You require Valid TMobile SIM only for Activation becuase GPRS Setting Preset in Phone.
But if you have Any other Non TMobile SIM Card Press Menu Button this will popup APN Setting Just Press it again Press Menu Button this will popup New APN Just Add your Carrier APN, Mobile Country Code and Mobile Network Code And reboot. If you can see G or E or 3G on top Bar your Data is Activated Just follow with your Google A/c and Password and you did it
Click to expand...
Click to collapse
@Hetaldp
Thanks 8! i was going almost crazy to get around this checked almost every forum but no body could give me a suggestion like this! thanks for you now i know how to set up my own account!
WBR
ReyTech.

I was able to get into safe mode via holding down the Menu Key while booting. Open Home was giving me issues and i was unable to get past the "Android" splash screen. Booted to safe mode via the initial instructions and was able to uninstall open home. I'm using JF's 1.5 ADP w/LucidREM App2Sd image. So the "safe mode" works in the newest release. I can't account for getting past the drawing pattern thing since i don't lock my phone and not sure about the activation thing. But it does boot to safe mode
hetaldp said:
Bypassing Google Activation is not Possible in any Version
Bypassing the Drawing Pattern was Patch in RC30
For for RC30 user they are out of luck.
Click to expand...
Click to collapse

In safe mode, only stock apps are loaded. I can post the whole log if anyone wants me to. And yes, its much like windows' safe mode, in a sense.

My wife's g1 is stuck in safe mode.
I have tried the holding menu+power buttons till it boots thing but nothing.
I flashed back to jk 1.41 and nothing.
Any ideas on how to get out of this safe mode.

BigJPR said:
My wife's g1 is stuck in safe mode.
I have tried the holding menu+power buttons till it boots thing but nothing.
I flashed back to jk 1.41 and nothing.
Any ideas on how to get out of this safe mode.
Click to expand...
Click to collapse
?
what do you mean? if you hold the menu + power button, it puts it into safe mode..
boot by holding the power only? also if you know how to use adb hook up your phone and do the following in a cmd prompt
Code:
adb logcat
we may be able to find something causing it, even if it is a little late. and by jk 1.41 you mean jf right?

andonnguyen said:
In safe mode, only stock apps are loaded. I can post the whole log if anyone wants me to. And yes, its much like windows' safe mode, in a sense.
Click to expand...
Click to collapse
B-man007 said:
?
what do you mean? if you hold the menu + power button, it puts it into safe mode..
boot by holding the power only? also if you know how to use adb hook up your phone and do the following in a cmd prompt
Code:
adb logcat
we may be able to find something causing it, even if it is a little late. and by jk 1.41 you mean jf right?
Click to expand...
Click to collapse
I'm sorry, Yeah I meant Jesus freak. If by adb you mean having the setup to develop on the pc then nope, don't have that.
Now I did search this forums and did a google search and found out that if I power off the phone then press and hold both "menu & power red button" I was supposed to get rid of the safe mode, I should say get out of safe mode.
When the phone got stuck in safe mode she was running on of the first rom from JF for 1.5. I also read that if the holding down the bittons thing didn't work I should either reflash or master reset. Is master reset what you do from the phones settttings?
Maybe I'm just missing something. I'm usually not this dumb @ following directions lol. I got on my phone one of the hero rom w apps2sd so I have done some major things (for me) to the phone (this on a different phone. My phone lol). But this got me scratching my head.
Thanks for replying man.
* update
I did the "return to master settings" thing. The phone rebooted and went to the console then I did an alt+w and the thing rebooted to the first activation with the dang "safe mode" still there. Sorry if I'm having a hard time explaining this.
She don't have that new spl. Do you think she can run a non hero rom with it? I want to try and get the new radio and maybe the spl and that newer recovery image in her phone and just maybe a newer 1.5 stable non hero rom and see what happens, eventhou I think non of it has anything to do with phone being stuck on safe mode.

BigJPR said:
I'm sorry, Yeah I meant Jesus freak. If by adb you mean having the setup to develop on the pc then nope, don't have that.
Now I did search this forums and did a google search and found out that if I power off the phone then press and hold both "menu & power red button" I was supposed to get rid of the safe mode, I should say get out of safe mode.
When the phone got stuck in safe mode she was running on of the first rom from JF for 1.5. I also read that if the holding down the bittons thing didn't work I should either reflash or master reset. Is master reset what you do from the phones settttings?
Maybe I'm just missing something. I'm usually not this dumb @ following directions lol. I got on my phone one of the hero rom w apps2sd so I have done some major things (for me) to the phone (this on a different phone. My phone lol). But this got me scratching my head.
Thanks for replying man.
* update
I did the "return to master settings" thing. The phone rebooted and went to the console then I did an alt+w and the thing rebooted to the first activation with the dang "safe mode" still there. Sorry if I'm having a hard time explaining this.
She don't have that new spl. Do you think she can run a non hero rom with it? I want to try and get the new radio and maybe the spl and that newer recovery image in her phone and just maybe a newer 1.5 stable non hero rom and see what happens, eventhou I think non of it has anything to do with phone being stuck on safe mode.
Click to expand...
Click to collapse
Its no problem I'm pretty sure I understand what your saying. Your menu key isn't, stuck is it? The new SPL by Haykuro will work on any almost any ROM, Hero or not. Flashing the radio might help and probably should be done. You can also try to start from step one and go through the steps to re-root it, but DO NOT PUT THE NEW SPL ON YOUR PHONE IF YOU ARE GOING TO DO THIS. downgrading the radio and/or un-rooting while the new spl is still on the phone will brick your phone.
I don't know how the safe mode is persisting across a master-reset (Alt + W)
If you are under warranty or insurance, it might be a good idea to unroot and restore original settings, and have them look at it.
You should also wait for more input by some of the community members here as I'm still inexperienced with Android.

The wife is desperate. She went to our buddy on the tmo store and he tried everything they know on it ofcourse then he found out it was a flashed g1 and told her it might be something screwy going on with it.
At the end of the visit he got the warranty department to send her a new one because "the menu button isn't working" yeah yeah... lol
Anyways... should I un root it anyways for when I have to send it? Thanks for the help man. I've been a member here since I had a dash a couple of years ago but usually don't post cause I sually find the answers to my problems by searching... the ol art of searching ah
Thanks again... ill check the un rooting thread again and will try that.

lol i've only been here a few days and i learned a lot. the people here are generally very helpful and i find almost all of my questions answered so i don't have that many posts either.
Ya you should unroot it because you don't want to have your RMA rejected and besides.... its getting RMA'ed anyway so whats there to lose

B-man007 said:
lol i've only been here a few days and i learned a lot. the people here are generally very helpful and i find almost all of my questions answered so i don't have that many posts either.
Ya you should unroot it because you don't want to have your RMA rejected and besides.... its getting RMA'ed anyway so whats there to lose
Click to expand...
Click to collapse
ive sent back a few g1s rooted with various roms on them, i even asked tech support if it was a issue that it was rooted, let alone running a leaked version of cupcake at the time
the responce i got back both times i asked was that as long as they can get the phone back to a stock rom, it didnt matter what rom was on it, ive yet to have an issue sending back g1's with cupcake on them before cupcake was released

Dimath said:
Well... Don't you still need valid T-mobile sim-card for the first boot after unlocking?
The real reason is, I tried to use my G1 without G1 data plan (-$25 cheaper . It was Ok, I could use WiFi for internet, but I made a factory reset and was not able to pass that activation after - can not use WiFi for that.
Click to expand...
Click to collapse
If you have a SIM with no data plan, you can just bring up the settings menu, connect to WiFi, and then activate. How? Connect using adb shell and type:
Code:
am start -a android.intent.action.MAIN -n com.android.settings/.Settings
All credit goes to JesusFreke for the find:
http://forum.xda-developers.com/showthread.php?t=452316
I really do hope someone will find some interesting uses for safe mode. Since I've already activated with my Google account, Gmail and Market both worked fine for me in safe mode. The only difference I see so far is that all widgets are disabled except: Analog clock, Calendar, Music, Picture frame, and Search. It did not bypass the "connect-the-dots" security drawing pattern for me. Anyone notice some other differences in safe mode?

ive got a black g1 and its stuck on the activation screen how do i get it to the home screen !?.

elkhiid said:
ive got a black g1 and its stuck on the activation screen how do i get it to the home screen !?.
Click to expand...
Click to collapse
What do u mean stuck ? As in u dont have a data plan and want to activate it ? if so refer to this.

Rooted - What to do and what NOT to do?

okay I just rooted my phone since everyone here told me to. I only did it so I can fix this Skype problem so I didn't have to factory reset.
What exactly can I do now that it is rooted with my LG optimus 3d.
Also I was told there are things you cannot do.
- You can't factory reset or it will brick your phone.
- You have to use usb debugging everytime you plug the phone into your computer.
- You have to have usb mass storage off always when plugging into your computer.

umirin said:
- You can't factory reset or it will brick your phone.
- You have to use usb debugging everytime you plug the phone into your computer.
- You have to have usb mass storage off always when plugging into your computer.
Click to expand...
Click to collapse
1. Never heard of that.
2. Yes.
3. Depends

I Am Marino said:
1. Never heard of that.
2. Yes.
3. Depends
Click to expand...
Click to collapse
can you explain in more detail.
because when usb debugging is enabled with the phone plugged in there is no way to get anything on or off my phone.
I cannot take the pictures off my phone, I cannot drag music onto the phone, etc.

umirin said:
can you explain in more detail.
because when usb debugging is enabled with the phone plugged in there is no way to get anything on or off my phone.
I cannot take the pictures off my phone, I cannot drag music onto the phone, etc.
Click to expand...
Click to collapse
Not true, when you plug your phone to your computer depending on the ROM it will either automatically enable USB mass storage, or bring up a screen on the phone allowing you to put it in USB mass storage mode. Either way, your phone will still function the same (unless using ICS).

I haven't come across a ROM that doesn't let you use mass storage unless that feature is broken on it.
USB Mass Storage should be perfectly usable for you. Especially if you're still running stock.

USB mass storage doesn't automatically turn on when the phone is plugged in, so nothing shows up. I have to manually turn it on.
if usb debugging is not enabled when I plug my phone in will anything screw up?
and what else can I do now?
I have superuser and I fixed my skype problem.

umirin said:
USB mass storage doesn't automatically turn on when the phone is plugged in, so nothing shows up. I have to manually turn it on.
if usb debugging is not enabled when I plug my phone in will anything screw up?
and what else can I do now?
I have superuser and I fixed my skype problem.
Click to expand...
Click to collapse
No it won't mess it up if you plug it in with debugging disabled. Probably the most important thing for you to do now is flash a custom recovery, make a nandroid back up and if you want, flash a custom ROM.

lowandbehold said:
No it won't mess it up if you plug it in with debugging disabled. Probably the most important thing for you to do now is flash a custom recovery, make a nandroid back up and if you want, flash a custom ROM.
Click to expand...
Click to collapse
how do I flash a custom recovery and do a nandroid backup? What is a safe custom ROM?

umirin said:
how do I flash a custom recovery and do a nandroid backup? What is a safe custom ROM?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1467868&highlight=recovery
That will point you in the right direction to get CWM recovery. The dev forum is not the easiest to navigate. To make a nandroid backup, just go into recovery and select "backup and restore" and then "backup". I can't comment on the ROM's because I don' have that phone.

Download ROM manager from the market. You can backup your existing ROM, install custom ROM's. There is a free version which I used for a while, but wanted to support the developers so I went ahead and got the premium version.
I would also highly recommend Titanium Backup. You can backup wifi settings, sms, mms, apps, etc.

yeah I downloaded ROM manager and I also have the same problem it only shows the 1 version, not my phone listed.
I looked in the thread you linked me... v.4.8.0.7 is a premium version. I found a link on google to download it but it's from my mediafire, I don't know if that's safe it could be infected.
apparently v.4.8.0.7 is the only version that has my phone model.
is there a safe site to download an old version? maybe there is a v.4.8.0.7 that isn't premium.

can I assume it's safe? It's an old premium version so...

Have you tried any root apps? I have recently rooted and finding some of them really worth the trouble of going through the rooting process

you guys really should elaborate a little bit more, or atleast point in the right direction....
1) you can do a factory reset all you want. it's just going to put the phone back into its stock condition. there really isn't a point in doing it though, so don't bother
2) usb debugging mode is only needed if you want to interface with your phone in a certain fashion. read up on ADB. if the ONLY thing you want to do is be able to get pictures from your phone, or put music on it or whatever, you do not need usb debugging mode enabled.
3) again, you can mount your phone as usb storage all you want. it isn't going to hurt anything. the ONLY reason you would NOT want your phone in this mode is when you are doing stuff with #2.
and to be quite honest, before you do ANYTHING with your phone like this again, do your research. i researched for a week before I rooted my phone. i already knew why debugging mode needed to be enabled and when/why i would want my phone in either storage or charge only modes. learn what you can from your specific phones section as taking info from a different phones section and applying it to yours can seriously mess you up. like brick your device kind of mess you up.
here are a few links to get you started:
LG Optimus 3D forum:
http://forum.xda-developers.com/forumdisplay.php?f=1073
(I noticed that it doesn't have a Q&A section. Ask questions in the GENERAL section, NOT the Development forum)
A VERY general overview of what ADB is and what it can do:
http://android-dls.com/wiki/index.php?title=ADB
And if you don't know something, or feel like "winging it" when it comes to altering your phone in any way, stop, don't do it, research and ask questions. Trust me you'd rather be the annoying guy asking the right questions than the idiot that says "HALP! I FUX0r3d my phone!" because you didnt know exactly what you are doing.
ALSO: if the ONLY reason you rooted your phone was to fix this Skype issue, and it has been fixed, you don't really NEED to go any farther. You accomplished your goal. That being said, with a rooted phone the possibilities are pretty much endless. The Devs do awesome work
EDIT!!!!
Here is a link to the actual ROM Manager website. At the top of the page it says "ROM Manager APK" download and install that to your phone.
http://www.clockworkmod.com/rommanager
Alternatively, here is the link to the FREE version of ROM Manager on the Market:
https://market.android.com/details?...yLDEsImNvbS5rb3VzaGlrZHV0dGEucm9tbWFuYWdlciJd
Hope I helped.

umirin said:
USB mass storage doesn't automatically turn on when the phone is plugged in, so nothing shows up. I have to manually turn it on.
if usb debugging is not enabled when I plug my phone in will anything screw up?
and what else can I do now?
I have superuser and I fixed my skype problem.
Click to expand...
Click to collapse
I have optimus 3D and when you connect to pc via usb you should see a message on phone saying to press its button to enable usb storage.
Press the button on screen and it will then enter usb storage mode.
Dave
Sent from my LG P920 using Tapatalk

this is what reason？need root？

Uh oh I do all three of those things probably on a daily basis....
Nandroid backup is your best friend. Get used to using it first and foremost. It's a total snapshot of your system. Once you get used to backing up and restoring a few times, and see how great it works, you'll gain a lot of confidence in trying out custom ROMs, which is where a lot of the fun begins.
It is so easy to take a backup, flash a custom ROM, get your email, calendar, phone, etc etc up and working on it quickly, play around with the settings, then take a nandroid backup of THAT (so you can come back to it and continue playing with it where you left off) and restore your "original" system -- it will be exactly as you left it. You can almost think of it as putting down one device and picking up another... the only limitation being you can only "hold" one at a time.
You can essentially live on 2 or 3 different ROMs at once. I generally have my go-to CM7 ROM which is my daily driver, but I've flashed a few different ROMs to check them out, including some pretty stable looking ICS ROMs.
Titanium Backup is helpful in this regard if you have certain apps and user data you want to bring over to a new ROM you're trying out. I've found doing a whole hog TB restore to a new ROM to be too much at once, and restoring system settings from one ROM onto a completely different ROM is often a square peg/round hole situation.
Lurk around on the relevant forums too and you will learn a lot of things you can try!
Oh as for what not to do - first and foremost DON'T PANIC! Anything goes wrong there is a lot of help available but it might take a little time to work out...
Second I agree with the above posters who say don't do something you don't understand. Read and research first, ask questions.
Third, if you really, really rely upon your device for your livelihood, or you mortgaged your house to purchase it, etc etc, don't mess with it. If you can't afford to be down half a day or two days if you messed something up and it might take a while to fix, go buy a cheap android device somewhere for just fooling around with.

Dubbee said:
Oh as for what not to do - first and foremost DON'T PANIC! Anything goes wrong there is a lot of help available but it might take a little time to work out...
Second I agree with the above posters who say don't do something you don't understand. Read and research first, ask questions.
Third, if you really, really rely upon your device for your livelihood, or you mortgaged your house to purchase it, etc etc, don't mess with it. If you can't afford to be down half a day or two days if you messed something up and it might take a while to fix, go buy a cheap android device somewhere for just fooling around with.
Click to expand...
Click to collapse
this is really fantastic advice. this forum (along with others) is an amazing resource, and it's really because of the help you can get from really knowledgeable AND unpretentious people. for someone who is new to root/android like me, it has proven to be invaluable. whatever you mess up, you can probably get fixed. just don't be too hasty or too careful. i came to android from a work-paid-for BB9630 (tour) i did all kinds of crazy stuff to that phone without fear b/c i knew if i bricked, my company would just give me another one no questions asked .. but i recently bought an evo (for personal use) when i switched jobs, and i wanted to root it and mod it immediately..but... i was a total noob to the process with android AND (just as importantly) i COULD NOT just break my phone and get another like it was nothing. so i read and read and read and asked a bunch of questions on various forums. then one day, like a little kid about to jump off the high-dive for the first time, i rooted and flashed a custom rom. pretty scary that first time, but now i flash a new rom a couple times a week. i have learned so much and am now rooted and enjoying all the things that come with that (except for going to bed later.) don't panic...great advice. i love it.

I have factory reset my phone 3 times while rooted. I didn't think much of it. I have a dinc 2, mabey it depends what phone you have.
Sent from my ADR6350 using XDA App

I know you can factory reset from recovery but you need to flash a ROM? And your not supposed to factory reset from your phone settings cause it might mess up your phone?
I put them as questions cause I'm not sure.
Sent from my Inspire 4G

[Q] Galaxy Ace (S5830i) headache with stock email deletion

HI guys, I'm hoping you can help me with a problem that's led me to start threatening my galaxy ace (S5830i) with a hammer.
Actually it's not the phone's fault it's purely my own stupidity, but none-the-less I'm here for help because I've spent all day and night trawling the net, trying to figure out how to proceed to resolve my issue on my own but I simply cannot make sense of the conflicting information I'm finding.
I promise you thing thing if nothing else, I have tried my very best to read around a hundred other forums, pages, and how 'to's but I'm finding that I have no resolution that I can work with because either:
- The tutorials turned out to be for the S5830 - not the i model - when I got to the forum
- The youtube videos all seem to be spoken in accents I cannot understand or not explained clearly, or are too technical
- Links I go to to get apk files etc are broken, wrong or leading me up another path I cannot follow
- Software does NOT look on my screen as it does on tutorials or websites (SDK for example)
- The people explaining the resolution type with such poor English I cannot understand what they're actually saying
- The solutions that work for others are too technical or advanced for me to understand and I'm finding it difficult to learn as I go (apart frm the root instructions which I found quite easy)
Anyway, I'll start at the beginning:
I have a samsung galaxy ace (S5830i) running:
- Gingerbread 2.3.6
- Baseband version S5830iXXLK1
- Kernel version 2.6.35.7
- Build number GINGERBREAD.XXLK3
I've already rooted it so I have superuser access, and I managed that perfectly well on my own
I installed titanium backup and somehow I managed to uninstall the stock email that comes with the phone. I think this is my problem because I now cannot download anything from google play, nor can I add a new gmail account to do so, so I'm stuck in no mans land not able to use googleplay (because my gmail account is now missing from my phone) nor can I seem to figure out how to get th apk file directly into the phone so that I can start fresh.
I'm also absolutely stuck on how to flash the phone and start again because nothing I seem to read is explaining it in simple clear terms that a layman can understand. When I do find a simple explanation, I find it's only for the non 'i' version of the phone, or if I find a simple instruction it's zip files for the rom do not contain all the files I need to use with odin v1.5
Also, there are conflicting explanations on flashing the rom on different forums/sites so I dare not use one over the other because another one contradicts it. I do not want to ruin my phone as right now it still basically works for now as a phone.
In my phone menu, the gmail icon is still there, just not the icon/app that said "email". The icon is now missing from my menus and with it there is now no way to use the play services without a gmail account on the phone.
When I click the gmail icon, it stats to open and then just shuts off quickly, not opening gmail, so I'm pretty sure all this is due to me deleting the email app using titanium backup.
Make sense?
What I'd really be grateful for is if on of you guys could help me out and explain in very simple terms what I need to do to either install the apk directly (preferred) so that I can add a gmail account to the phone and get access to google play again, or failing that a simple how to flash the rom with stock gingerbread, together with links to software that's known to be bonafide.
I am literally being driven mad going around in circles on forums and sites to keep going back to square one.
Any help will be very gratefully received. Or I'm afraid this may mean I'm going to smash my new phone int a wall and never use a smartphone again, because obviously I'm too stupid to play around with them on my own.
I really appreciate your help if someone would be able to invest a little time here.
Thanks very much for your time, guys
Jobeeey

additional info
Right, these are the instructions I found on this forum, but I'm unclear if I'm approaching this right..
Flashing s5830i with Odin v1.85
1.Turn off the phone and put it in Download mode by pressing Power+Volume Up+volume down.
2.Open Odin v1.85.Run as Administrator!.
3.Put the files in Odin and don't touch the settings
4.If it's a one-file firmware put it in PDA section.
If it's multiple put the files in the correct section.
5.Click start and don't touch the phone!Don't turn off computer and don't unplug the phone!It will reboot automatically and the first boot will take some time,so don't panic!
Click to expand...
Click to collapse
I've found a rom (which is a single file) and if I'm reading this right I place that in the PDA section of Odin after installing the usb drivers onto my pc (done that and windows recognizes my phone in the sense that it isn't now hassling me for drivers every two seconds).
Ok.. so I seem to have got the correct rom for my specific ace model.. and the instructions seem to be that I now:
1) Connect usb cable
2) Boot my phone into download mode (I can do that I think).. but at what point do I press vol down to download a new os.. before or after pressing start in Odin?
3) Open Odin and add file as in my attached screenshot (I can do that)
4) Click 'start' in Odin
5) Wait for my phone to reboot
And that should be job done, the phone should be flashed with the stock rom again and that should get me back on track, right? Or am I about to screw up my phone and ruin it even further?
Thanks for reading. I hope someone can advise if I'm doing this right as I've seen other forums say that I should tick the 'Re-partition' box, and other that say I shouldn't, and this one says nothing about it at all.
This is one of the tings that's confusing me, and once I'm now flashing a phone for the first time it's flippin scary to do it on my lonesome!

This is what I mean..
I've just tested going into download mode with odin ready, and the phone gets there (vol up+down + power on).. but each time it gets into download mode it seems to disconnect from odin and no com port is open. I get the windows device disconnected/connected beeping and the connection seems to sever.
What the Fffff...
This is exactly what I'm talking about.. nothing seems to be working like it's meant to be and I'm getting nowhere with any instructions I can find after god knows how many hours researching this.
:crying:

update (lol)
Mornin all,
So, just in case anyone finds this useful..
The flashing problem is kind of irrelevant now because:
A) Odin (tried several versions) simply will not stay connected to my phone when it boots into download mode, and having checked many tutorials for this it sees that this is a problem some of us cannot get past.
Anyway, one of the methods to resolve this was to wipe the cache and clear all data etc, which I did, and now my phone is stuck on the "pres the android" screen, and my phone will no longer get past that. Tried pressing clockwise in all four corners but still nothing.
No probs.. so we move on to a new step of trying to split the roms via cygwin, but guess what? Every single time I try to download the cygwin files, that freezes at about 98% and will not download, no matter which mirror I select.
So, this is what I call a curse that isn't going to be lifted by me no matter hat. It's not not meant to be.
Therefore, what I'm going to do is take it to a local shop that unlocks mobiles and give it to them to flash back to stock rom for me.
If that doesn't work, do you know what I'm gonna do?
Nothing. Because there's nothing you can do when the processes do not follow the same progress as they do in the tutorials.
I hope other novice S5830i users save themselves all his time and trouble and don't bother following the same process and become locked out of their phone at the touch android screen.

Update
Yipee,
Right, I stumbled across a solution that worked for me.
What I did was get my 2gb msd card that came with the phone and slapped MindCR v1.0.12 on the card and whacked that in my phone (this bypassed not being able to get a new rom on the sd card as it wasn't unmounted before the crash, so my pc wouldn't recognise the date to put it on via the pc).
Then I updated the rom from that 2gb card (vol up + menu + power to get into recovery mode) and it took it a few minutes to update the firmware and give me back the full use of my phone, and with a shiny new os on it. Whoop!
I didn't bother with CWM as I'd forgotten to add it before flashing, but it worked none-the-less and I'm now back in business (wiped it manually).
As it turned out this version of MindCR works really well so far as I can tell. I realise there are updated roms now but I've come to the conclusion after the scare I had that if you're not entirely sure what you're doing, it's best to leave it alone if it ain't broke.
SO.. now I have a phone with what seems to be a better os than the stock and less bloatware on it, no phone problems I can see after thorough testing... and from what I can tell it turned out to be better than it was before the disaster.
And I learned a bit in the process. Like for example, don't feck around removing apps from smartphones with titanium unless you've backed them up and you're prepared to stress out for over 20hrs wondering what to do about it.
And, also, don't expect much help from a forum because you may not always get it. << That' not a dig at xda by the way. It's just a BIG forum so your threads may not be seen by the right person before they get buried in past pages.
Hope my little journey helps another unsuspecting S5830i user who comes across the thread.

[Q] Tablet stuck in password screen + recovery mode doesn't work

Hello,
I'm sorry to bother you with an apparently repetitive thread, but I assure it is not.
I've been dealing with this problem for over a year now. Of course there were times that I simply gave up, but every now and then I searched all over the internet (seriously; very resilient, I am) and tried everything. Nothing seems to work.
The issue is: one day I was reading something on Google Reader and the tablet restarted. When it came back, it was in this password screen.
[AS A NEW USER I COULDN'T POST THE IMAGE - please see attachment ending in 41]
Detail: I had never, EVER set any kind of password. I don't do this with any of my devices unless I'm obliged to (as in Windows 8, this big piece of shiite).
So the thing is: I did not set a password, I did not choose to ask for a password in any situation and there isn't a single combination that I haven't tried. The thing doesn't even ask me to stop -- like 'hey, you've tried your 30k input, I think you should stop now'.
Now, for you not to start cursing me, I tried EVERYTHING that is basic and post-basic to fix it. I did wipe the data, I tried flashing another ROM, I did cold boot, factory reset, EasyFlashed, nvflashtf and whatnot. I swear to GoogleGods that I, as a non-expert-but-very-keen-on-technology, could.
Another thing that happens is when I try to enter the recovery mode, after using the nvflash, it doesn't work. The image that appears to me is this one:
[SAME THING -- attachment ending in 38]
Again: I'm not a complete noob. I know how to get into things; all I need is a simple guidance. I'm really sorry if this has been posted before and only I couldn't find it, but I won't be so if someone helps me to get it and solve my problem. I can't stand this anymore -- now it's just a matter of pride.
Thank you all.

This happened to me on my SL101 after I flashed a ROM of some sort. I used ADB commands to push the stock ROM back to it and to push another Recovery to it. Mine was in worse shape, Recovery loop, and then I finally got it to where yours currently is. My physical nor on screen keyboard would even work. Look up some ADB commands, perhaps you already know them, and attempt to either push the stock ROM or a new Recovery blob back to it.
D

DatDude123 said:
Look up some ADB commands, perhaps you already know them, and attempt to either push the stock ROM or a new Recovery blob back to it.
D
Click to expand...
Click to collapse
Yeah, well, y'know, I'm not at this level yet, but I'll dig into ADB and stuff.
I tried to use this sometime in the past, but my computer was so bad back then that I had to give up to keep my sanity. Now I've got a fairly good one (very good, considering the few things I use it for), however much less time.
Tonight is the night, though. I'll study as much as I can and I'll fix this ****. Any tip you may remember now would be useful.
Thanks.

I'm struggling with something even before I start: there's no way I can get access to the system and turn the USB Debugging on.

I know I'm not getting much attention, but I won't give up. Please just do not accuse me of spamming; I'm just a desperate geek that has been kept away from his toy.
Alright, after the childish speech, here's the latest update: I cannot use de ADB thing because there's no way I can turn on the USB debugging mode.
Or is there? The latest news is that I can get access to some system files through the ASUS File Manager (turns out it still reads the MicroSD Card, even though I could not update the device this way). So, technicians, is there a way to hack into this beast? Fu ck, I don't even know how to call it anymore.
There isn't much I can do with this File Manager. Mostly visualize the folders and rename this and that (which is the only thing I reckon might be useful).
Jesus, I'm sleepy, I can't even write properly anymore. Please someone help me. It can't be that hard.

maycondimas said:
I know I'm not getting much attention, but I won't give up. Please just do not accuse me of spamming; I'm just a desperate geek that has been kept away from his toy.
Alright, after the childish speech, here's the latest update: I cannot use de ADB thing because there's no way I can turn on the USB debugging mode.
Or is there? The latest news is that I can get access to some system files through the ASUS File Manager (turns out it still reads the MicroSD Card, even though I could not update the device this way). So, technicians, is there a way to hack into this beast? Fu ck, I don't even know how to call it anymore.
There isn't much I can do with this File Manager. Mostly visualize the folders and rename this and that (which is the only thing I reckon might be useful).
Jesus, I'm sleepy, I can't even write properly anymore. Please someone help me. It can't be that hard.
Click to expand...
Click to collapse
For some reason i thought you were on th sl101(slider) so i didnt comment. So heres the deal, any fix is going to be data destructive(nothing you can do at this point as even if you manage to pull data from the tablet, it will be encripted) You need Easyflasher(dev section) follow the instructios there (basically donwloading stock firmware from asus and by using nvflash in apx mode it will re-partition storage, and upload the stock firmware to the tf101)
If you hit any problems, post them here and ill help you further
Edit: just read you post more, if you tried easyflaher and it didnt work, please post the details of what you tried within easyflasher.
Its a strange issue, if it happend to me and id tried the things you already have, this is what id try:
-Flashing ubuntu from the dev section(i known very little about how nvflash works but it maybe only re-partitioning certain partitions, ubuntu i would imagine would require a full re-partitioning)
-alternativly (or on top of the previous idea) use one of the ubuntu installers(OLiFE on ubuntu worked the best for me, but franks tools/ newer software based on franks tools should work fine) and flash the Prime! rom on its own.
If these dont work, your last resort is asus - but thats a long shot lol

maycondimas said:
I know I'm not getting much attention, but I won't give up. Please just do not accuse me of spamming; I'm just a desperate geek that has been kept away from his toy.
Alright, after the childish speech, here's the latest update: I cannot use de ADB thing because there's no way I can turn on the USB debugging mode.
Or is there? The latest news is that I can get access to some system files through the ASUS File Manager (turns out it still reads the MicroSD Card, even though I could not update the device this way). So, technicians, is there a way to hack into this beast? Fu ck, I don't even know how to call it anymore.
There isn't much I can do with this File Manager. Mostly visualize the folders and rename this and that (which is the only thing I reckon might be useful).
Jesus, I'm sleepy, I can't even write properly anymore. Please someone help me. It can't be that hard.
Click to expand...
Click to collapse
If you can't get into anything, but you can enter APX Mode, but NVFlash doesn't work, then I'm not sure anything will as NVFlash completey deletes and recreates all the partitions on the drive
So unless you have been unlucky and downloaded a bad version of an NVFlash ROM....
I know you say you have used NVFlash but I`ll stick this here anyway
The way I restore is:
Connect tablet to PC and make sure the tablet is turned off (Make sure it is the only USB device connected other than keyboard/mouse)
Hold Volume Up + Power for a few seconds until you hear the USB connect sound on the PC, release the buttons, you are in APX mode
Install APX drivers if you have not already
Now extract this
http://www.xdafileserver.nl/Files/Asus/Asus%20Transformer%20(TF101)/STOCK%20ROMS/ICS%20.27/NVFLASH_ICS_9.2.1.27_WW_NOROOT.7z
And run "download.bat"
I think you should see some text appear on the tablet screen, and progress will be shown in the command prompt window on the PC
Wait for it to complete 100%
Its been a while so I can't remember if the tablet will reboot on its own or if you need to hold power for 30 seconds to get out of APX mode
Either way, make sure it is completely finished and reboot the tablet
Only thing I can remember going wrong with NVFlash was the first time I rebooted after a sucessful boot, it would hang on a black screen
Just hold power for 30 seconds and then power on normally, done, if it has worked you have your tablet back, if not, I think its a hardware issue > see asus

Im very keen to get this fixed/ find the issue as uptil now I thought the tf101 was virtually software invincible, you need to pay attention to what the nvflash process says, the one thing I can think of as to why nvflash didn't work is it can't write over encrypted partitions although that would make no sense why it wouldn't.

Just a suggestion... make sure you're not docked. Some people report issues when nvflashing while docked (I can't replicate those issues except with the Tubuntu tool).

Is there a solution?
I also have an error! see picture

[HELP] Cannot factory reset a Kyocera Hydro Wave (C6740N) on Metro PCS

Greetings to all the developers and registered users on this site... Yes, this is my first post, but I read here pretty often and I used the search function, trust me! Seriously, I've tried all I could and I am at my wits end, but this is technology, we can't let it own us, we gotta continue owning it and that's what online communities like xda help us do, so thanks for all your past, present, and future contributions here. So I got this Metro PCS Kyocera Hydro Wave (C6740N) that I can't factory reset for a number of reasons, but mainly because I believe that there is either no boot-loader or no recovery partition as a result of Metro PCS flashing the ROM...
Anyway, lets get to the juice:
- Device powers on/off, but no combo of Vol -/+ and Power buttons bring up a recovery menu or anything (holding any combo down just boot-loops)
- Device has no SIM and no micro SD card, and the battery is not removable
- Device is locked... Like, pattern-locked/google account info/too many attempts/yada yada yada
- Device has no data and no WiFi connection active, so I could not use the google account to get past the lockscreen
- Device does not have USB debugging enabled/Google drivers for ADB do not work (Windows 7 auto-detects when I plug in the phone and installs a generic Microsoft driver which cannot be removed even after uninstalling the device, and also I pointed the Device Manager to the correct Google drivers I installed with the Android SDK Tools, as well as the Samsung Naked Universal Drivers I found on this forum, and Kyocera ADB drivers I found through Google which all failed, Windows returned a message stating that the most up-to-date or best driver for this device is already installed)
What I've tried (everything possible really):
- Hard reset/Recovery from phone: FAILED
- Connect to Linux and install ADB, then tried running the adb shell, adb devices, fastboot devices, etc but phone not detected: FAILED
- Connect to Windows 7 and install ADB (Android SDK Tools), I literally checked every single box and installed Platform-tools, google drivers, everything, got to the command prompt as admin, cd to the ADB directory, ran same commands as in linux, also tried commands on several forums and posts like adb shell rm /data/system/gesture.key to remove the lock but everything: FAILED
- Connect to Windows 7 and attempt to install proper drivers using RootGenius, MoboRobo, PDAnet, and several other suggestions which all were oblivious/unable to detect the device despite Windows recognizing it, so they all: FAILED
- Connect to Windows 7 and attempt running ADB through a Cygwin terminal, but the command "sudo" was not recognized/not valid, so: FAILED
- Connect to Windows 7 and use XRYViewer to extract data from the phone, possibly to see the system files and get an actual understanding of what everybody is saying you need to mount from the recovery partition, but no clue how to use this, since I can't find an XRY file in the internal storage, so: FAILED
- Connect to Windows 7 and access data/recover data from device using "Wondershare Dr.Fone for Android" and "iLike Android Data Recovery Pro" but both programs instructed me to enable USB Debugging, which is not possible, so the both also: FAILED
Despite this being my first post, I have scoured the forums here in addition to every other forum and webpage regarding this issue as well... There just isn't much about this phone except negative reviews, and I have come to the conclusion that on this particular model phone, I am out of options... I have a paperweight... I'm not very familiar with Android... So please correct me if I'm wrong...

Any input?
I'm curious if there are any options at this point, I have been trying to get through to this phone on several computers for the past couple days and it is frustrating me... Any input from the community would be much appreciated...

Mojo2XL, I guess you did not find an answer?
Mojo2XL said:
I'm curious if there are any options at this point, I have been trying to get through to this phone on several computers for the past couple days and it is frustrating me... Any input from the community would be much appreciated...
Click to expand...
Click to collapse
I have the exact same problem and it appears I am several months after your post. I just want to use this device as an e-reader but like you, I cannot get anything to recognize it!~

eenuckols said:
I have the exact same problem and it appears I am several months after your post. I just want to use this device as an e-reader but like you, I cannot get anything to recognize it!~
Click to expand...
Click to collapse
may be this:
*2767*3855# - Think before you give this code. This code is used for factory format. It'll remove all files and settings including the internal memory storage. It'll also reinstall the phone firmware.
I found code in internet, but may be it works? can't check, my "wave" comes to me from USA by post for a few weeks..

barabeka said:
may be this:
*2767*3855# - Think before you give this code. This code is used for factory format. It'll remove all files and settings including the internal memory storage. It'll also reinstall the phone firmware.
I found code in internet, but may be it works? can't check, my "wave" comes to me from USA by post for a few weeks..
Click to expand...
Click to collapse
doesnt work.. you can only get to emergency dialer which can only b used to make emergency calls

elliwigy said:
doesnt work.. you can only get to emergency dialer which can only b used to make emergency calls
Click to expand...
Click to collapse
okay. i will try something, when my phone will come. is your Wave locked?

barabeka said:
okay. i will try something, when my phone will come. is your Wave locked?
Click to expand...
Click to collapse
i bought another phone and they threw it in free but it has a pin code lock so i cant even get to google screen to bypass frp as im stuck at pin lockscreen and these darnphones have no recovery..
i doubt ull figure out a way as im real savvy with this stuff lol theres no recovery to boot into in order to reset and no way to update tje phone wothout knowing the pin code

any luck? i cant believe this thing is this locked down. makes apple look like chils play

warriorpluto said:
any luck? i cant believe this thing is this locked down. makes apple look like chils play
Click to expand...
Click to collapse
i believe it can be done with a pc

Did you happen to get the files the other member posted that was only available for eight days?

Mojo2XL - Sort of.
I saw a youtub video (sorry no link) that says there was a OTA update that changed the phone's firmware that solved all the problems mentioned here. Thing is I have no carrier and cannot find this new firmware, but, I am still hunting....
​
eenuckols said:
I have the exact same problem and it appears I am several months after your post. I just want to use this device as an e-reader but like you, I cannot get anything to recognize it!~
Click to expand...
Click to collapse

I'm having the same problem, I have been trying to get this thing to hard reset for a week now. There has to be a way to reset this Hydro Wave.. Has anyone dealt with this thing?

Hey hold the buttons as follows volume- & power at the exact same time while your phone is off be warned if you phone was preowned you need the goole account originally activeated with that phone if you do not have that then your in the same vote as me i cant remember any of my gmail account info to my wave from when i had it active I have litterally tried every thing to recover the info and i still can't recover it

WhiteWolf77 said:
Hey hold the buttons as follows volume- & power at the exact same time while your phone is off be warned if you phone was preowned you need the goole account originally activeated with that phone if you do not have that then your in the same vote as me i cant remember any of my gmail account info to my wave from when i had it active I have litterally tried every thing to recover the info and i still can't recover it
Click to expand...
Click to collapse
That doesn't work on this phone the hydro wave from AT&T has factory reset protection so it cannot be reset using the volume down and power button reset

Any update?

dannybz said:
Any update?
Click to expand...
Click to collapse
let me work on this, been trying to master as many FRP bypasses as i can. I don't have the device but a client is in the same boat

I accidentally stumbled upon a something weird. I've managed to make the camera crash to the home screen somehow. I believe this was a result of holding both volume buttons and opening numerous menus while using the camera. My guess is that it overloads it after a certain amount of times and causes it to crash. I've gotten the android UI to crash like this before. I will try to recreate the scenario and update you guys on this. it's on a Kyocera Hydro Wave. Running android 5.0 I believe. Try going wild until the phone starts to lag. eventually stuff will crash and the lock screen may go with it. use this to your advantage and enable USB debugging as quickly as possible because it will reset itself after about 30 seconds. Someone else on YouTube has recently told me that it worked for them. I would look into doing that.

PhoneScrambler said:
I accidentally stumbled upon a something weird. I've managed to make the camera crash to the home screen somehow. I believe this was a result of holding both volume buttons and opening numerous menus while using the camera. My guess is that it overloads it after a certain amount of times and causes it to crash. I've gotten the android UI to crash like this before. I will try to recreate the scenario and update you guys on this. it's on a Kyocera Hydro Wave. Running android 5.0 I believe. Try going wild until the phone starts to lag. eventually stuff will crash and the lock screen may go with it. use this to your advantage and enable USB debugging as quickly as possible because it will reset itself after about 30 seconds. Someone else on YouTube has recently told me that it worked for them. I would look into doing that.
Click to expand...
Click to collapse
Is there anything a little more realistic possible? Lol, I can see an update available, can't connect to WiFi to update haha. The stuff they lock these phones with anymore i swear

I'm new to this forum, but NOT new to this site . I have visited here on numerous occasions seeking the help that needed . With that being said, I would like to offer a Bonafide, Tried and True way to factory reset the Kyocera Hydrowave . I KNOW that this work's for I have done in on numerous occasions for a friend of mine that works for Metro PCS ....
Step One: Completely power off the phone .
Step Two: Hold the Power AND Volume DOWN Buttons SIMULTANEOUSLY .
Step Three: DO NOT release any buttons, even when you get to the Boot Menu . (Very Important, If you don't do it right, you have to start all over lol ) .
Step Four: Once inside the Boot Menu, ONLY release the Power Button; or the Boot Menu will close and you have to start all over again .
Step Five: Use the Volume Down Button to Highlight the Wipe/Factory Reset Option .
Step Six: Use the Power Button to Select the option .
Step Seven: Watch the bottom of the screen for the progress, and then use the Volume Up Button to restart .
And there you have it . I hope that this helps out SOMEONE out there, because I feel good giving back for the help that I have received on here .
PS.( If you would like for me to post a Video Tutorial on this, can someone please tell me how to post the Video; I guess by me being a Newbie on here, I'm not allowed to do as of yet ) . If Anyone needs to contact me, as I'm not on here very often, my email is [email protected] .

LilAnt530 said:
Is there anything a little more realistic possible? Lol, I can see an update available, can't connect to WiFi to update haha. The stuff they lock these phones with anymore i swear
Click to expand...
Click to collapse
As unrealistic as it may sound it actually works Trust me on this. its similar to the LG attack which... is nothing but entering a long password.
betanews.com/2015/09/16/bypass-the-android-lollipop-lockscreen-by-entering-a-really-long-password
Just give it a go. it already worked for one dude on youtube. it takes a while but it honestly works. If you can get it, update the phone as soon as possible turn the screen timeout off and let it update. when the phone resets the update will install and you will be able to factory reset.
I mean it couldn't hurt. if you're locked out with no factory reset and ADB tools won't work what else can you do?