I will tell you my story from the beginning.
I have bought my Optimus 3d as soon as it was release then within a month I had a problem. The device kept telling me to insert a sim card i tried with many different cards but that did not help so I had to return it to the carphone wherehouse and they told me I need a replacement so I took the new and tried it. It worked my sim card with no problem after that I put it back in its box and put it in the shelf for about 6 months. Yesterday I wanted to use it because I want to try GB and the 3d converting tool. and when I tried to update it keeps telling me I am up to date although I am using froyo 2.2.2 with KV 2.6.35.7 and SV v10d and when I used Lg update tool but it keeps telling me I am up to date but when I check for my phone latest update it says v21a
Can anyone help me please.
Any entry is appreciated.
Can any body help me please... I do not know what to do !!
aleidnet said:
Can any body help me please... I do not know what to do !!
Click to expand...
Click to collapse
Go Here and download the relevant KDZ of your country:
http://lg-phone-firmware.com/index.php?id_mod=2
then use this guide to flash your phone:
http://forum.xda-developers.com/showthread.php?t=1287236
good luck
Related
I have a stock O2 UK O3D. LG website says update available, phone says I have the latest version (v10k) which is 2.2 so I run LG updater on the laptop and click its update history tool which says "s/w v21a" as if it thinks I have gb.
I cannot find who provides my updates, it's definitely not O2, maybe if I rooted it I could find who supplies them via a config file or else I will be stuck with Froyo forever
Dave
mistermentality said:
I have a stock O2 UK O3D. LG website says update available, phone says I have the latest version (v10k) which is 2.2 so I run LG updater on the laptop and click its update history tool which says "s/w v21a" as if it thinks I have gb.
I cannot find who provides my updates, it's definitely not O2, maybe if I rooted it I could find who supplies them via a config file or else I will be stuck with Froyo forever
Dave
Click to expand...
Click to collapse
If you are operator locked and in the UK you will get the update december 5th.
It is due 5th of December in UK. However, you can flash the official ROM, see development forum.
According to the operator (O2) my phone is not supported by them for updates, and the phone seller has no idea who sends them. Will wait for december and see.
Thanks
Dave
I am with O2 but didn't get my O3D from them. Up until I flashed it last night it was still on 10D!
So nobody from O2 updated my handset.
I have to wait as if flash phone and mess it up cant replace it
Dave
You can try removing your sim card and selecting another country in the LG updater if your phone is not simlocked by O2.
Flashing the official rom isn't that hard either. I can't get the update either so I just followed the tutorial for kdz flashing and had GB on the phone in about 15 minutes without losing apps and messages/contacts etc.
If you're not sure about flashing then it's probably best to just wait. The update will be provided by LG themselves eventually through the update utility.
Think I will wait, have flashed phones before (put gb on my gt540) but knowing what cwn go wrong I daren't risk a contract phone as got two years til can replace it.
Dave
Same problem
I have an open phone in sweden. When uptating my phone i got v10k and i cant get v21a. Every check i updater and outside shows no possible update, but v10k. If i check update history in the updater it says v21a.
It is now a matter for the support and in the hands of the mobile phone expert. They have to solve the problem under the sales contract.
I got mine from a company that sells lots of different phones with various providers contracts so although my sim contract is with O2 in the UK the updates are not and the seller doesn't push ota updates so I have no idea how to find out where they come from.
Although I have rooted the phone now so if anyone knows a system file that stores details of where the update check connects to and replies with it I can check that
Dave
No network , no IMEI.. BASEBAND NEEDED LG su760
HI Guys
My Rom is ICS,
I have been struggling for the past 5 days to resolve this issue on my O3D.
Im new to flashing Roms and basebands so please bear with me.
The phone just stopped reading my sim card and no network. I took it into an LG shop they advised that i upgrade from Gingerbread to ICS, so i used the LG support tool to update to 4.0.4
After this it reads my sim card, but no Network, No IMEI.
Tried 3 different sim cards to no avail.
I called LG and they said i need to update from the country i received the phone from. I dont know which country the device comes from as i got it as a gift.
What i noticed is that while flashing all these diff roms the baseband stays the same: XMM6260
KERNEL: 3.0.21
I am in Mongolia and not sure what baseband to use or how to flash just the baseband.
Any help would be highly appreciated please, im getting desperate!LG says i need to get the IMEI showing to fix the issue.
Somebody updload v30b_00.kdz file
Please help..
Same here. Will let ya know when ı find the solution
hope this can help. http://forum.xda-developers.com/showthread.php?t=1734330
I recover my imei successfully following the thread.
tuvshinjargal said:
No network , no IMEI.. BASEBAND NEEDED LG su760
HI Guys
My Rom is ICS,
I have been struggling for the past 5 days to resolve this issue on my O3D.
Im new to flashing Roms and basebands so please bear with me.
The phone just stopped reading my sim card and no network. I took it into an LG shop they advised that i upgrade from Gingerbread to ICS, so i used the LG support tool to update to 4.0.4
After this it reads my sim card, but no Network, No IMEI.
Tried 3 different sim cards to no avail.
I called LG and they said i need to update from the country i received the phone from. I dont know which country the device comes from as i got it as a gift.
What i noticed is that while flashing all these diff roms the baseband stays the same: XMM6260
KERNEL: 3.0.21
I am in Mongolia and not sure what baseband to use or how to flash just the baseband.
Any help would be highly appreciated please, im getting desperate!LG says i need to get the IMEI showing to fix the issue.
Somebody updload v30b_00.kdz file
Please help..
Click to expand...
Click to collapse
Baseband
awi05 said:
hope this can help. http://forum.xda-developers.com/showthread.php?t=1734330
I recover my imei successfully following the thread.
Click to expand...
Click to collapse
I can't find my imei under the battery. Where is it? is it hexadecimal?
By the way, Flashing a baseband file (fls) won't fix imei. You still get no signal no imei nothing.
Go back to GB over the KDZ UPDATE. ONLINE!!!
after that flash the KDZ you like over the OFFLINE method.
Sent from my LG-P920 using xda app-developers app
anita mobile
Tdhanushka said:
I can't find my imei under the battery. Where is it? is it hexadecimal?
By the way, Flashing a baseband file (fls) won't fix imei. You still get no signal no imei nothing.
Click to expand...
Click to collapse
Where is IMEI ? i have this problem too
It should be a long number (something like 12 or 15 digits) in the battery compartment, unless someone removed it to steal it or for some other reason.
Man, LG Update tool is a piece of... work..., I'll say 'work.'
Try this
tuvshinjargal said:
No network , no IMEI.. BASEBAND NEEDED LG su760
HI Guys
My Rom is ICS,
I have been struggling for the past 5 days to resolve this issue on my O3D.
Im new to flashing Roms and basebands so please bear with me.
The phone just stopped reading my sim card and no network. I took it into an LG shop they advised that i upgrade from Gingerbread to ICS, so i used the LG support tool to update to 4.0.4
After this it reads my sim card, but no Network, No IMEI.
Tried 3 different sim cards to no avail.
I called LG and they said i need to update from the country i received the phone from. I dont know which country the device comes from as i got it as a gift.
What i noticed is that while flashing all these diff roms the baseband stays the same: XMM6260
KERNEL: 3.0.21
I am in Mongolia and not sure what baseband to use or how to flash just the baseband.
Any help would be highly appreciated please, im getting desperate!LG says i need to get the IMEI showing to fix the issue.
Somebody updload v30b_00.kdz file
Please help..
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?p=44532338&nocache=1
fix
I had the same issue and fixed by following some topics here..just set a new imei (Original imei i mean) ...
i use terraterm which is handy for terminal emulation.
btw take a look at
http://forum.xda-developers.com/showthread.php?t=1719803
http://forum.xda-developers.com/showthread.php?t=1942836
http://forum.xda-developers.com/showthread.php?t=1734330
I need help in returning my device to work. Can anybody help me? It's An LG Optimus LTE (LU6200) Korean version.
Problem:
Touchscreen doesn't work, So the solution that I made was to buy a new digitizer/touchscreen for my device but no response. My phone's touchscreen still doesn't work. (Note: The digitizer/touchscreen i bought worked in other same device but not mine).
Then I tried flashing stock rom (note: KDZ file) still doesn't work. I even tried flashing an ICS file Engineer Version But same problem...
Can anybody help me. :crying::crying:
blank1134 said:
I need help in returning my device to work. Can anybody help me? It's An LG Optimus LTE (LU6200) Korean version.
Problem:
Touchscreen doesn't work, So the solution that I made was to buy a new digitizer/touchscreen for my device but no response. My phone's touchscreen still doesn't work. (Note: The digitizer/touchscreen i bought worked in other same device but not mine).
Then I tried flashing stock rom (note: KDZ file) still doesn't work. I even tried flashing an ICS file Engineer Version But same problem...
Can anybody help me. :crying::crying:
Click to expand...
Click to collapse
Try flashing Stock rom with new touch screen installed... else check for the ic
Hi everybody..
I'm in desperate need of help. After attempting to root my g4 somehow something went wrong and the phone is completely dead with no sign of life . I know there isn't a way yet to unbrick the g4 but I'm hoping somebody out there is working on it and maybe can help me out.. I'm willing to donate for the help Thank you !
What exactly are your symptoms? Does it not even turn on? Have you tried getting into download mode? How exactly did you try to root it? What were your steps and are you able to identify where you went wrong exactly?
petermg said:
What exactly are your symptoms? Does it not even turn on? Have you tried getting into download mode? How exactly did you try to root it? What were your steps and are you able to identify where you went wrong exactly?
Click to expand...
Click to collapse
I was trying to gain root access following this method : http://forum.xda-developers.com/g4/orig-development/root-tmo-vzw-intl-variants-soon-root-lg-t3164765. everything seemed to go well but after it was complete the phone wouldn't start and it booted only to a message on the LG LOGO with something failed. At that point I was still able to get to download mood so I tried to restore it to stock doing this : http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848. again the process went like it should but at the end the phone went dead with no signs of life, No led light, No vibration, can't turn on to anything and only gets detected on the computer as " qhsusb bulk ". My guess is I used the wrong KDZ files
I would appreciate it if you can help.
It indeed sounds like you have a hard brick, in which case the device can't be brought back to life.
However for chance, and for future reference. Which kdz did you try to flash? Assuming your device is the ATT model, then did you download the Puerto Rico kdz?
Because there is not a KDZ or TOT for the ATT H810 model the Puerto Rico KDZ from Claro will recover an ATT soft brick. These are labeled H810PR.
xxxwalo said:
I was trying to gain root access following this method : http://forum.xda-developers.com/g4/orig-development/root-tmo-vzw-intl-variants-soon-root-lg-t3164765. everything seemed to go well but after it was complete the phone wouldn't start and it booted only to a message on the LG LOGO with something failed. At that point I was still able to get to download mood so I tried to restore it to stock doing this : http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848. again the process went like it should but at the end the phone went dead with no signs of life, No led light, No vibration, can't turn on to anything and only gets detected on the computer as " qhsusb bulk ". My guess is I used the wrong KDZ files
I would appreciate it if you can help.
Click to expand...
Click to collapse
Maybe you downloaded the wrong img file from the first post? It has to not only match your phone, but ALSO match the version of the firmware you're currently running. That's why this method here is better:
http://forum.xda-developers.com/g4/general/lg-g4-100-root-success-directives-root-t3180586
Because you just make a backup img of your system partition and then inject root into that and you have a new rooted system partition img file along with your original system partition image file so you can go back to stock if you want some time later. I'm guessing you tried flashing the wrong version of your firmware. Do you know what version you were on? Looks like the only one listed on that thread is version g. I'm on version b, so if I were to have tried that, I would also have had an error when trying to boot. Had you made a backup of your original system partition as mentioned here you should have simply been able to dd it back and you'd be up and running. However now it looks like you've "hard bricked" your phone indeed. Out of curiosity, which KDZ file did you use? What's the file name that downloaded?
It looks like there are some utilities created that can UNBRICK some phones when they get into this state, but it looks like they have had custom scripts written for the partitions of those phones, for example:
https://www.youtube.com/watch?v=ERZvlJIC9dE
https://forums.oneplus.net/threads/solution-recover-from-hard-bricked-oneplus-one.104943/
Maybe someone familiar with how those apps run could modify that app for unbricking the G4s? Currently however, there doesn't seem to be anything you can currently do to immediately fix your phone. So ... can you get it exchanged or replaced????
xxxwalo said:
I was trying to gain root access following this method : http://forum.xda-developers.com/g4/orig-development/root-tmo-vzw-intl-variants-soon-root-lg-t3164765. everything seemed to go well but after it was complete the phone wouldn't start and it booted only to a message on the LG LOGO with something failed. At that point I was still able to get to download mood so I tried to restore it to stock doing this : http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848. again the process went like it should but at the end the phone went dead with no signs of life, No led light, No vibration, can't turn on to anything and only gets detected on the computer as " qhsusb bulk ". My guess is I used the wrong KDZ files
I would appreciate it if you can help.
Click to expand...
Click to collapse
Honestly, bring the phone to ATT and tell them it said an update was available, and upon accepting it...the phone ended up in this state. They will most likely exchange it for you.
warri said:
Honestly, bring the phone to ATT and tell them it said an update was available, and upon accepting it...the phone ended up in this state. They will most likely exchange it for you.
Click to expand...
Click to collapse
not an option because I bought it from somebody on craigslist... I already bought another one so I'll just wait and see if somebody comes up with a solution if not I'll sell it for parts.
xxxwalo said:
not an option because I bought it from somebody on craigslist... I already bought another one so I'll just wait and see if somebody comes up with a solution if not I'll sell it for parts.
Click to expand...
Click to collapse
Any chance they can give you the original receipt and that way you could possibly send it in for warranty work.
CAG-man said:
It indeed sounds like you have a hard brick, in which case the device can't be brought back to life.
However for chance, and for future reference. Which kdz did you try to flash? Assuming your device is the ATT model, then did you download the Puerto Rico kdz?
Because there is not a KDZ or TOT for the ATT H810 model the Puerto Rico KDZ from Claro will recover an ATT soft brick. These are labeled H810PR.
Click to expand...
Click to collapse
Yep that what I did now I need help
---------- Post added at 07:47 PM ---------- Previous post was at 07:44 PM ----------
Can't some upload the complete eMMC IMAGE for the lg g4 at&t to see we can't this to work thanks
same here
i have the same problem any solucions yet?
CAG-man said:
It indeed sounds like you have a hard brick, in which case the device can't be brought back to life.
However for chance, and for future reference. Which kdz did you try to flash? Assuming your device is the ATT model, then did you download the Puerto Rico kdz?
Because there is not a KDZ or TOT for the ATT H810 model the Puerto Rico KDZ from Claro will recover an ATT soft brick. These are labeled H810PR.
Click to expand...
Click to collapse
Sir my lg g4 ATT start problem of bootlooping on factory (stock) rom .yesterday night when i was playing game on it automatically it restarted and starting this problem..
Can i fix it by installing H810PR kdz to my lg g4 H810.
Can this H810PR kdz hardbrick my ATT lg g4? ?
possible to fix
Hi able to recover the phone . Just should do what I tell right
First we need a 16GB or larger memory card...
Phone Orginal KDZ/TOT
your Phone EMMC Dump
please tell how what software are you using and step by step please
---------- Post added 10th January 2017 at 12:00 AM ---------- Previous post was 9th January 2017 at 11:58 PM ----------
regtoyme said:
Hi able to recover the phone . Just should do what I tell right
First we need a 16GB or larger memory card...
Phone Orginal KDZ/TOT
your Phone EMMC Dump
Click to expand...
Click to collapse
did it worked for h810?
its work on lg h810 At&t
first thing is that you need a backup.img of mmcblk partition from running h81020n firmware (Because DOwngrade baeband not support)
you just follow the step to create backup.img
https://forum.xda-developers.com/att-g4/general/att-h810-qualcomm-hs-usb-qdloader-9008-t3539554
http://gsmmarhaba.com/threads/unbrick-lg-g4-brick-hs-usb-qdloader-9008-without-box.612/
Plz someone provide backup file
please someone give backup file who are using rooted lollipoopp
Hi guys, I bought the lg g flex 2 h950 att version and when i put another sim card it asked me to put a code, and i thought it was my sim card code. I put it like 10 times and a message appeared and said that the phone was permanently locked out.
I did a reset, a hard reset in recovery mode and it did not work, i also saw that i can reinstall firmware, but my version is 5.1.1 of android and if i do it my phone will brick. So what can i do? Please i have no idea
Fabricio Jallaza said:
Hi guys, I bought the lg g flex 2 h950 att version and when i put another sim card it asked me to put a code, and i thought it was my sim card code. I put it like 10 times and a message appeared and said that the phone was permanently locked out.
I did a reset, a hard reset in recovery mode and it did not work, i also saw that i can reinstall firmware, but my version is 5.1.1 of android and if i do it my phone will brick. So what can i do? Please i have no idea
Click to expand...
Click to collapse
Hi, I also have a problem , I do not know how to unblock ,im flash from 5.0.1 to 5.1.1 PR, but those have yielded nothing
gezonis said:
Hi, I also have a problem , I do not know how to unblock ,im flash from 5.0.1 to 5.1.1 PR, but those have yielded nothing
Click to expand...
Click to collapse
Hi men, I could fix it, i took it to a technician and he told me that was locked by at&t, of course i knew that, and that there was a server on the internet that could free that lock. I paid like 20$ on that page, honestly i don`t know what page is it but it was the solution, not flashing or even installing a new firmware