Database Info

[DEV]PSFreedom Android [Bravo|N1|G1|Sapphire|EVO|HD2|Wildfire

EDIT 2 (6/09/2010):
Success at last!!!
Now confirmed working on numerous devices
Check http://psfreedom.com/wiki/index.php?title=Device_compatibility_list for compatibility.
Check http://www.github.com/psfreedom for source
DESIRE INSTALLATION INSTRUCTIONS
http://psfreedom.com/wiki/index.php?title=OpenDesire4.0.4
N1 INSTALLATION INSTRUCTIONS
http://psfreedom.com/wiki/index.php?title=Nexus_One
HTC DREAM/G1/Magic INSTALLATION INSTRUCTIONS
http://psfreedom.com/wiki/index.php?title=G1
HTC SAPPHIRE INSTALLATION INSTRUCTIONS
http://psfreedom.com/wiki/index.php?title=Magic32A
HTC EVO INSTALLATION INSTRUCTIONS
http://github.com/kakaroto/PSFreedom (NO BINARY AVAILABLE YET BUT THIS DOES WORK)
HTC WILDFIRE INSTALLATION INSTRUCTIONS
http://www.ps3underground.net/esclusiva-port-del-psfreedom-su-htc-wildfire/
HTC HD2 (ANDROID PORT) INSTALLATION INSTRUCTIONS
http://bit.ly/bPZf0C
Other MSM72K devices among numerous others are still being worked on. If you can in any way help please join #psfreedom on IRC.FREENODE.NET (By help I mean if you are a kernel developer or think you can offer some form of useful assistance, asking for status updates may get you kicked off the channel).
HSUSB Devices (Check the compatibility list) have not yet begun development. We are searching for a HSUSB developer to assist in the project, please join #psfreedom on irc.freenode.net if you are.
FAQ
Q: What is all this about hacking the PS3?
A: A few weeks ago, someone released a USB tool that allows you to switch any PS3 into "dev" or "debug" mode. The long and short of this means that the PS3 has finally been hacked and homebrew is a real possibility. After a lot of clever reverse engineering, the hack was documented and distributed under the name "PS3Groove". Some clever people ported that code so that other USB devices could be used for this purpose. It just so happens that your smartphone is also a USB device and this was a project to port THAT code so that your Android smartphone could be used to hack your PS3.
Q: Cool! Where do I start?
A: Slow down there, cowboy. This is pretty technical stuff, if you've come here from another forum, or are unfamilliar with terms like "recovery", "flashing", "rooting" and such, take a deep breath and look around the forums for more information, as any mistakes could brick your phone.
First, you'll need to know if your device is compatible. There is a list of android devices maintained here: http://psfreedom.com/wiki/index.php?...atibility_list
This will tell you if your device is supported, as well as point you to where to go if it is.
Q: Ok, so I have a supported device, now what?
A: Just owning the device isn't enough. You'll need to root it to enable you to install custom ROMs. Once you're confident about installing custom ROMs, you're ready to rock and roll! Now, this IS the Desire dev forum, so from here on I'll assume you have a HTC desire, rooted and ready to go. If you have a different device, refer to the link above, or look on your device's own forum.
Q: What ROMs are compatible with this?
A: If you thought that you might need a specific ROM - you'd be right! The whole hack revolves around the kernel that's loaded into the ROM. Essentially, this means that not all ROMs will be able to do this. Right now, if you're looking for an easy solution, install OpenDesire. CyanogenMOD may well work, too, as well as ROMs based off either of those, but no guarantees or promises are made.
Q: What about Sense ROMs?
A: Unfortunately, this isn't feasible. HTC Have yet to release the source code for Sense 2.2, which means we can't port this into it. So if you have a ROM that you like running sense, you'll have to make a choice - Sense, or PS3 hacking? There's no middle ground with this. Alternatively, you can just nandroid between the two ROMs, however you'll soon see how tedious this can get =P
Q: Ok I've got Open Desire installed, now what?
A: Opendesire by itself is just a damn good ROM, not a lean, mean, PS3-hacking machine, so you'll need to add something else. The details are kept here, but essentially there are two update zip files. One will "enable" the PS3 hack and one will "disable" it. You flash those files directly over the ROM itself, using your favourite recovery.
Q: BDMV or Homebrew?
A: In order to keep PSgroove away from Sony's legal team, they released it without the ability to play backup PS3 games, only PS3 homebrew (to which there is currently very little, but stay tuned!), they did this by disabling BDMV. So there are TWO "enable" files. One is "Homebrew", which is a direct port of the PSGroove code and will not play backup games and the other is "BDMV", which will play both PS3 homebrew AND backups.
Q: Did you say BACKUPS?!
A: Yer darn tootin' I did! Legal backups, of course. One of the few pieces of homebrew available is the Backup Manager. This is a simple application that will let you backup a GAME THAT YOU OWN onto an internal or external USB hard drive, then play it without the disk. You'll still need a disk in the drive, but any PS3 game will work.
Q: Where do I get Backup Manager?
A: Backup manager is built with the PS3 SDK, which means it's technically illegal software, so you wont find it on this site, but it really isn't hard to find with a bit of googling. Whatever you do, don't ask for it here!
Q: Hey guess what, I found a copy of backup manager, how do I use it?
A: Ok, so before you start, do yourself a checklist:
You'll need -
Rooted phone,
running a ROM with the PS3groove code loaded onto it (e.g. open desire with klutsh's enable zip flashed on top of it),
USB cable plugged into your PS3 going to the phone.
Phone switched on and on the home screen.
A PS3 running Firmware 3.41 (support for earlier Firmwares will come later, but don't ask when).
Make sure there's no disk in the drive.
Step 1: POWER OFF your PS3 COMPLETELY. This means flipping the switch off at the back of it (if it's a PHAT PS3) or UNPLUGGING it if it's a SLIM PS3.
Step 2: Switch it back on and IMMEDIATELY press the "disk eject button". When I say immediately, I mean it - you've got 0.2s to press it!
you'll notice your PS3 takes longer to boot, a few extra seconds. Once it has booted, you'll notice under GAME, you'll have a couple of extra options.
Step 3: Plug in your USB drive with manager.pkg on it, then select "* Install Package File". Select manager.pkg and it'll install, giving you a new Icon.
Step 4: Backup manager is now installed. Run it and put a disk in the drive. You'll see it appear in the list and it'll give you an option to back it up. It'll first ask if you want the external drive, then it'll ask if you want to install it to the Internal drive. More on that later.
Now, go make yourself a cup of tea. In fact, make several, Blu-ray disks are frickin' huge and take time to backup.
...................
Ok, so the game is backed up. Go ahead and put it back in it's box, where it'll be safe from harm. Now, get yourself ANOTHER PS3 game, any game at all and put it in the PS3. In backup manager, you'll see both your disk game and the backed up game. Select the backup game and press "X".
You'll now be kicked back to the XMB. But look at the disk icon. It should be showing you the game you backed up, NOT the game in your drive. You'll need a legit PS3 game in your drive for this to work, you'll also need to make sure you're running BDMV enable, or it wont work (it'll still show you the game in the drive).
Q: Sounds great! But what's the catch?
A: Actually, there are several. For one, the external hard drive must be FAT32, or it wont be detected by the PS3.
Because of this, any games that have files greater than 4Gb wont work (for example, God of War III), you'll need to install it onto the INTERNAL drive.
Even then, some games may not work at all. Luckily, there are a few lists showing which games work, which don't and which only work on the internal drive.
Oh and some games require you to delete all of their savegame data before they'll load. Sorry.
Furthermore, things like DLC, patches, etc. tend to not work, but this is very early days at the moment, so sit tight!
Q: What's this I hear about "stealth" backups?
A: Quite simply, everyone is expecting Sony to want to protect their precious PS3, which will likely come in the form of a banwave for anyone doing this. Make no mistake, do not assume for a second that you wont get banned for doing this. Still, some people believe that they might be safer if they use a "stealth" Backup Manager. This is simply a version of Backup Manager that tries to make it look like you're playing a different game, like MW2. So far, despite rumours to the contrary, Sony hasn't banned anyone yet, so nobody knows just how detectable it all is.

I'm hoping something comes of this, but I wouldn't get TOO excited, the developer of this is only 15 and while I'm sure he's quite talented, he's still quite young so it could take him a while, assuming it's possible at all.
Still, I like the guy, he makes no promises, doesn't pretend to be anything he isn't and makes it quite clear what he is and isn't capable of. He's essentially said "I'll give it a shot!" and that's good enough for me.

Sorry for the double post, but there's an update on this:
http://netzke.blogspot.com/
This guy is working on an Android port and, from what he's posted, he's not far off.

I sent the kid a donation, looks liek he already has the PSGroove part of the app working.
@ neoKushan, what does age have to do with anything? i know a few kids who are 15-18 who are smarter then half the people i have met on XDA, Including my self.

there is a version compiled for the n900. i have it and it works,would be good if someone could compile for desire? it is open source

abc27 said:
eavpsp is already working on this and we should offer him all the help that XDA has to offer.
Click to expand...
Click to collapse
He's been exposed as a fake, unfortunately. There's a story on the front page of ps3hax about it.
I'd donate to Netzke if I had some good hard evidence that he's genuine but so far I haven't seen anything.

Relikk said:
He's been exposed as a fake, unfortunately. There's a story on the front page of ps3hax about it.
I'd donate to Netzke if I had some good hard evidence that he's genuine but so far I haven't seen anything.
Click to expand...
Click to collapse
I'm aware. At the time I posted many people believed he had something genuine in store.
To be honest, porting over the N900 version mightn't be all that difficult.

Juggalo_X said:
I sent the kid a donation, looks liek he already has the PSGroove part of the app working.
@ neoKushan, what does age have to do with anything? i know a few kids who are 15-18 who are smarter then half the people i have met on XDA, Including my self.
Click to expand...
Click to collapse
I'm merely trying to point out that at 15, even if he's extremely talented, he's still quite inexperienced. From reading his twitter, he doesn't pretend otherwise. I completely support the guy and wish him well and by no means want to make it sound like he's a n00b or anything, I'm simply saying that he's young is all.

what does bring a jailbroken android to us?

cCeT said:
what does bring a jailbroken android to us?
Click to expand...
Click to collapse
It's not the android phone that's being jailbroken, it's the Playstation 3 being jailbroken through the use of an Android phone.

cCeT said:
what does bring a jailbroken android to us?
Click to expand...
Click to collapse
I believe this is actually a software clone of the PSjailbreak exploit which has been re-engineered to be run off of our Android devices. I.E., Put your Android phone in "PSjailbreak Mode" and then connect to PS3, it would then perform the same functionality that having the actual USB device/dongle would provide.
A marvell idea and one that I would love to try out once the tool reaches a stable version. I'm sure over the next week or so we'll see who can actually port it and who is just 'fronting'.
I'll be subscribing to this thread for sure!
**EDIT** Seems neo beat me to the answer!

I've uploaded the binary files used on the N900 so we can get to work on the Android port.
It comprises of a kernel module and two shell scripts.

If what the other guy who's doing the android port says is true, you don't need a special kernel or anything to do this, just root access. Who knows how true that is, though.
Would be nice to see some collaboration from some devs here who know what they're doing lol

if this happens then its gonna be awesome!!
Finally region free BR!!

Netzke is obviously a scammer looking for a quick buck... he mentions in every post that 15$ will get beta access.

Yes, it looks like scam at mee too.
Anyway, looking forward to get the N900 version ported to Android (someone on PSX Scene said we just need to compile the source for the kernel of our phone)

It does appear to be all that's needed. It's a portable kernel module according to the dev. He's releasing the source later today so we wait in earnest.

Make that source release tomorrow, depending on time zone.
Was pushed on line just before he went to bed.
As for netkaz, he's scamming, first claim was donations for a server.
I offered up a full server for free for the life of the project, no response, now he's going to start on a iPhone port after he can afford a iPhone.
eavpsp, well his own private chat room was leaked, he was getting other dev's to do all the work then planned to put his name to it.
The dev that is showing most promise at the minute is qberty1337
But as already said, once the n900 kernel module source is out it should not take too long.

The PSP porting effort is a farce to be honest. We just need that N900 source code and we can get going.

Klutsh said:
Make that source release tomorrow, depending on time zone.
Was pushed on line just before he went to bed.
As for netkaz, he's scamming, first claim was donations for a server.
I offered up a full server for free for the life of the project, no response, now he's going to start on a iPhone port after he can afford a iPhone.
eavpsp, well his own private chat room was leaked, he was getting other dev's to do all the work then planned to put his name to it.
The dev that is showing most promise at the minute is qberty1337
But as already said, once the n900 kernel module source is out it should not take too long.
Click to expand...
Click to collapse
thats good to hear
I hope someone is able to create a BR region free app for PS3 now!!

xperia play help please

hi,just got one of these swapped my iphone 4 for it,is it worth putting the emulator FPSE on my phone ive checked the update and im up to date and is it a lot of hassle installing this to my phone and can it brick it ???

Just download fpse using the android market and I don't see how it could brick your phone as it's just another app.

hi,im new to this phone & im hoping i made a good choice swapping my beloved iphone 4 for this,so far i like it but the brightness is terrible is there a way of making it brighter as its very dull,and how do u get the games once u install fpse ?

Proof indeed that owning an iPhone melts your brain!

1) Install fpse
2) Google "playstation iso"
3) Download games you already own, (obtaining games you have never bought is illegal)
4) Follow the fps bios instructions, follow all legalities
5) Run the game
6) Have some fun
Once you get used to the emulator scene you will love it. If you aren't able to follow instructions very well and occasionally do your own research on guides already written, and do indeed come to the conclusion you have an iphone 4 brain washed grey matter residing in your skull, then go back to the iphone

hi,i purchased fpse but ive forgot what the bios instructions are ?
it came up when i first started the app but it no longer comes up when i start it,should have bloody wrote it down any ideas please ?

It should be in the settings. You point fpse to the bios file.

settings inside fpse ? if so i dont have settings inside the app

You should be able to press the menu button (between home and search) and from there go to settings.

U have to download a bios file called scp1001 something like that, and move it in the directory of where your ps roms are kept, hope this helped
Sent from my R800i using XDA App

[Q] Finding solution for instant switching tool (Root/Unroot) w/o reboot

Hello.
Thank you for your click to read my entire thread.
I prepared two version of my story with different length.
Herer is a longer story
Shorter story is available at the end of this thread.
My family and I have android-based smartphones.
We are Korean and have lived in Korea.
1.
My younger brother chose his first smartphone as Nexus S,
but my father chose his phone as GalaxyS.
My father and younger brother are not familar with electronic gadget,
so I always help them when any change is needed to his smartphone.
2.
Banks in Korea hate rooting action.
In the recent,
they decide to refuse providing smart-banking service
if customer try to use banking service with rooted smartphone.
There are many complains about this decision but no follwing measure was occured.
Bank company's refusing mechanism is following.
When the smart-banking app is excuted, they check some files related rooting.
If the files were found, they stop to work and are automatically closed with warning messege.
3.
I found the 'Tegrak Kernal' and 'Tegrak app' composed by a Korean.
With these kernal and app, user can switch between Rooted and Unrooted by just one tap.
The kernal is neither a rom nor rom-dependant thing. It may stored in recovery reign.
Switching mechanism what I understood is simple.
When menu in the app is tapped, by excuting some script, su related files are completed deleted.
This action does not require any rebooting process.
In one or two seconds, unrooting (by deleting files) is done.
Finally the smart-banking app works again immediately.
Rooting (rerooting) is similar. Tapping another menu button in app, rooting is completed.
Titatanium or Root explorer works again.
This function is fantastic for Koreans.
4.
Tegrak kernal is dedicated to Galaxy serise.
There is no plan to make the kernal available for other devices.
5.
I love HTC's phone and want to keep using the phone with smart-banking feature.
My yonger brother also have to keep using his Nexus S until contract is ended.
I tried some search about rooting/unrooting without reboot in XDA, but I have no results.
In my thought, XDA is the most advanced place for smartphone in the world.
I also think that there are many developers outside Korea than inside Korea.
Idea about swithing without reboot may not unique or special.
I'm sure that a app for "swithing rooting/unrooting without reboot" is alrady exist somewhere.
6.
Can I get any advice or a clue about solution for "swithing rooting/unrooting without reboot" which work for any device (or just not os-dependent)?
The exact name or address is welcomed, but suggesting keywords is also appreciated.
Becasue English is not my native language, I have difficulties in expressing my need or goal in English for a good search result.
Click to expand...
Click to collapse
Shorter story
Tegrak is a kind of recovery and is made by Korean developer.
Tegrak have a function of switching between rooting and unrooting without any reboot.
Tegrak is dedicate to Korea's famous model, Galaxy serise only.
I'm finding such a app or thing for Nexus or DHD.
Any help for finding is appreciated.
Click to expand...
Click to collapse

..

I found this app:
OTA RootKeeper
From the app description:
"A bonus feature is present, allowing you to un-root your device while keeping a su backup.
This way you can naively hide root until you choose to restore it via without further complications.
This nifty feature work on every rooted device.
** Temporary un-root statement **
This feature is designed for dev purposes in order to test their app with or without root.
The goal here is not to encourage stupid and unacceptable behaviors by movie or content sellers trying to prevent you to purchase or watch digital media you purchased if your device is rooted.
Vote with your dollars: Don't accept being a customer of companies restricting your freedom with defective and and inefficient technical measures."

Thank you, Election Day.
Fight against company or government is very painful and scary things for me as a person in Korea. There are many complains but concentrated protest was not found yet in Korea.
Fortunately, a Korean developer opens file/folder list which should be deleted prior to running smartbanking app. That could be helpful later if I find some tunable tools for temp unroot.

Thank you very much el_psycho.
Your found is the exact what I want.
I just tested the app, but it requires some improvements against bank apps in Korea.
Therefore I leaved an appeal to the author of Rootkeeper.
http://forum.xda-developers.com/showthread.php?p=21769752#post21769752
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1241517&page=7
Click to expand...
Click to collapse
Thank you for your advice again, el_psycho.

Playstation Mobile

To install the Playstation Mobile app and have it work on our phone, go to the official site and install the app. Then, flash the certification from XDA. Validated as working on the Aries CM 10.1 build 2.
App: http://www.playstation.com/psm/store/en.html
Fix: http://forum.xda-developers.com/showthread.php?t=1919574

What can you play with it and where do you find it?
sent from me

To answer the "where did I find it" question first: saw it being advertised on the E3 PS video theatre that I had to let run for 30 minutes to finish the last E3 quest in PS Home.
It plays various PS Mobile games and apps... it's basically a Sony-run Play Store. However, while it will install on any device, it only runs on devices which are "certified" to work, which means that if you flash a custom ROM or are on a different device (like ours), you need to tell it that everything will work out fine by giving it the certification files manually.
Tried a game quickly and it installed and ran. It's sort of like turning your phone into a PS Vita. Thumb stick in the upper left, d-pad in the lower left, select/start in bottom center and the standard PS buttons on the right, with a shoulder button on each top corner.

I meant where can you find games for it.
sent from me

It's not what you're thinking.
Sent from my Galaxy Nexus using Tapatalk 4 Beta

It's a self-contained store/program. You run games you buy/download using it and only those games. They may not all be the greatest, but... eh, now you can check that for yourself and don't have to feel annoyed that Sony locked it away from us behind a stock/certified ROM wall.

help
i need hwo to install games in my i9505 video if possible

[PORT] Quake 1 on FTEDroid (w/ gkp profiles for newer & older GameKeyboard apps)

--THREAD REQUESTED TO BE CLOSED 6/23/17 DUE TO BEING UNABLE TO MAINTAIN THREAD OR PROVIDE SUPPORT TO QUESTIONS --
Hi All,
I've created this thread to share information on an Android port of the FTE QuakeWorld client called FTEDroid. (Scroll down for download links, installation, and setup instructions). The app is free to download and use and it allows you to to play Quake 1 in Singleplayer/Multiplayer modes. If you use Gamekeyboard+, you can play using the Xperia Play's slide out game controls rather than using the touchscreen. (Also... it may be able to run other versions of Quake, but I haven't got around to trying yet).
Along with the FTEDroid info, I'm sharing 2 Gamekeyboard gkp profiles that I mapped out. The first one is for the newer "Gamekeyboard +" app v. 6.0.0, that is currently available through the Google Play Store. The 2nd gkp is for the older Gamekeyboard app v 4.0.1 that I thought some of you may still have on your phones. (See the Gamekeyboard setup instructions below for the download links).
FTE developer "Spike", (who developed FTEDroid), has done an awesome job with this port. He and the FTE team all deserve a HUGE thanks for their hard work. I've tried several other ports for Quake 1 and this is the smoothest and best performing one that I've tried so far. I'm really hoping that some other Xperia Play owners will give this a shot and provide suggestions and feedback. I also think it would be a blast to try to set up some Multiplayer Quake sessions with anyone interested, so please try this out and give some feedback.
(Below are some actual screen shots of Quake 1 running on FTEDroid, taken from my Xperia Play).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER:
None of these steps or suggestions should harm your phone. However, if you choose to follow the steps in this thread and install any of the linked files, then you are choosing to take full responsibility for any bad things that could happen to your phone. Please don't proceed with the below steps if you don't agree with this and are not comfortable with using root apps that modify your phone. (Gamekeyboard needs root to work with this gkp, but you can use FTEDroid with touchscreen if you're not rooted).
(IMPORTANT) You should own a copy of the Quake 1 game to run it on FTEDroid, as you need the PAK0 and PAK1 game data files for the game to work. I'm not able to supply the PAK files to you, as they are copyrighted by id Software. If you don't own the game, you can do an Internet search and buy the original Quake 1 from Steam as a direct download (it's currently about 10 USD). You can also obtain the PAK files by purchasing an original Quake 1 installation CD off of eBay, and then copying the PAK files from the CD over to your SD card. I've seen just the original Quake on eBay for as cheap as $5, but I purchased a Windows version of “Ultimate Quake” off of eBay for $25 USD (and it includes Quake 1, 2, and 3). I was able to insert the CD into my laptop, open “My Computer”, right click on the CD/DVD location, and then explore the CD's contents without needing to install the game to my computer. I located the PAK files by going into the Setup folder, then going into the ID1 folder.
-------------------------------------------------
STEP A.
Instructions to set up FTEDroid – adapted from this website: http://wiki.quakeworld.nu/FTEDroid
1. Download and install the FTEDroid apk onto your phone. (You must enable installation of “Unknown Sources” in your phone's settings to be able to install the apk). You can grab the FTEDroid apk from a download link at the above referenced wiki website: ( http://wiki.quakeworld.nu/FTEDroid )
2. Connect your Xperia Play to your computer with a USB cable. On the root of your SD card, create a file folder named fte. Then within the fte folder, create another folder named id1. (Make sure to use lower case letters, as this is important).
3. Copy the files “PAK0.PAK” and “PAK1.PAK” into the id1 folder that you created on your SD card.
4. After doing these steps, you should be able to open the FTEDroid app and run Quake on your Xperia Play. When it first starts up, choose whichever Graphic Preset you want. I've been using “Normal (Faithful)” and it works good for me.
-------------------------------------------------
STEP B.
Detailed Setup Instructions for GameKeyboard+ (version 6.0) for Quake1 using FTEDroid and the linked gkp profile: (use the alternate gkp down below if you have an older GameKeyboard app).
**If you don't own Gamekeyboard +, you can purchase it from Google Play at this link: https://play.google.com/store/apps/details?id=com.locnet.gamekeyboard2&hl=en
1. Download the gkp profile from this link and save it on your SD card: LINK REMOVED - as I am no longer able to provide support to this thread.
2. If this is the first time you are opening the GameKeyboard + app, then click "Not Now" when it prompts you to "skip soft keyboard and choose stand alone mode."
3. Now follow steps 1 and 2 on the GameKeyboard main setup screen to enable it as the active Input Method
4. For “Input Device”, set it to “Keyboard/Digital Gamepad”
5. For “Usage Mode,” enable the “Show Qwerty” setting, (you'll want the Qwerty keyboard to pop up later when playing the game so you can type in the Game Console). (**Also make sure that “Emulate Keyboard” is chosen).
6. Now go to "Settings" and enable "Use Advance Input". (This will likely prompt Superuser to ask you to grant permission if this is first time running GameKeyboard).
7. Scroll up a little and enable "Alternate Key Detect"
8. Now go to "Import Profile" and import the Quake1-FTEDroid3.gkp. Then go to "Save Profile" to save it, and finally go to "Load Profile" to load it - (you should be able to just load it in the future after you do these steps the first time).
9. Now scroll down and uncheck the box for "Use Hot Key" to disable it.
10. Then scroll all the way to bottom and go into "Internal Options. Make sure the boxes are checked for "8-way D-Pad," "Show Start and Select," "Show Analog Stick," "Remap Hardkey," "Show Keyboard First," and "Use Analog. "
11. *This step is important-- Go to "Custom and Test" in the main GameKeyboard setup screen... this will pop up the game controls. Then touch quickly in the very center of the virtual onscreen "Dpad." Now go to "Rotation" and select Left rotation. (Now use the back button to back out of the GameKeyboard app and go on to Step C).
-------------------------------------------------
STEP B - ALTERNATE DOWNLOAD/ SETUP INSTRUCTIONS FOR THE OLDER GAMEKEYBOARD v.4.0.1
(The left touchpad does work with this gkp, but I gave up (for now) on trying to get the right one to work. All of the other controls are mapped the same as the gkp for the newer Gamekeyboard app above).
1. Download the gkp profile from this link and save it on your SD card: LINK REMOVED - as I am no longer able to provide support to this thread
2. Now follow steps 1 and 2 on the GameKeyboard main setup screen to enable it as the active Input Method
3. Now go into settings and in "Quick Setup", choose "Xperia Play->Touchscreen"
4. In settings, scroll down to "Import Profile" and import the file "Quake1-FTEDroid-v401b.gkp" from where you saved it on your SD card. Then go to "Save Profile" to save it, and finally go to "Load Profile" to load it - (you should be able to just load it in the future after you do these steps the first time).
5. Now, scroll through these different settings to make sure they are all enabled:
__8 way D-pad
__Show Start & Select
__Show Analog Stick
__Remap Hardkey
__Go into Customize Layout and make sure that "Enable Custom Layout" is enabled
__Show Warning
__Use Advance Input
__Use Analog
6. Make sure to disable "Touch Screen Mode" by removing the check box next to it. Now use the back button to back out of the GameKeyboard app.
-------------------------------------------------
STEP C.
Last Step is to make a couple small changes within the Quake 1 game's configuration settings.
Boot up into the Quake 1 Main Game Menu, then scroll down to “Options,” and select it by pressing the X hard key. Now select "Customize Controls" and scroll down to "Attack." Now press the X hard key and it should say “Press Key” to let you change the binding setting for “Attack.” Press the X key again to map "Attack" to the actual X hard key on the phone.
**I would also advise going into the game's Video Options and increasing the Contrast. This makes the game look much better on our phones. Just Apply Settings afterwards and it should stick after you back out to the main menu again. Now just use the back button to go back to the main menu.
~~~~ THAT'S IT! You should now be able to play Quake 1 on your Xperia Play with the hard key game controls ~~~~
-------------------------------------------------
Here's how the Xperia Play Hard Keys are mapped:
“Directional Buttons”-- Up and Down are mapped to walk forward and backward, Left and right turn the character left and right.
“Left touchpad” will move the character forwards, backwards, left, and right. (should work on both gkp's)
“Right touchpad” pans the character's view around in the game -- this does NOT work with the gkp for the older GameKeyboard app v. 4.0.1. (I'm having a hard time with the touchpad controls being too sensitive and difficult for me to control. But, I mapped them out just in case others want to use them or want to try to improve on them).
“Triangle” key is mapped to "Jump/Swim Up"
“X” key is "Attack"
“Square” key is mapped to "Look Up"
“Circle” key is mapped to "Look Down"
“Select” key is mapped to "swim down"
“Start” key is mapped to switch weapon
“Left (L back shoulder)” key is mapped to Step Left
“Right (R back shoulder )” key is mapped to Step Right
“Volume up” key shows info on progress/stats within the game
“Volume down” key should toggle between the Gamekeyboard controls and the Qwerty Keyboard
“Menu” key pulls down the Game Console (it should also pull down the Qwerty Keyboard to let you type in the console if you set it to show Qwerty in the Gamekeyboard+ settings)
“Back” button brings you back to the Main Game Menu where you can load/save the game, change options, etc...
-------------------------------------------------
CREDITS, THANKS, & FURTHER INFO:
-Major thanks goes to the creator of FTEDroid (Spike). He and the whole FTE team have done an awesome job. You can read more about Spike and the FTE team at http://www.fteqw.com/about.
-Thank you to the unknown wiki site creator ( http://wiki.quakeworld.nu/FTEDroid ) for the helpful info and FTEDroid download link
-Thank you to Locnet, the developer of Gamekeyboard +, (which makes it possible to enjoy so many games with the Xperia Play)
-Thank you to other XDA Xperia Play users, contributors, and developers who have posted helpful information in the XDA threads. I've used various sources from people like TLRtheory, poo-tang, and many others to learn about the GameKeyboard app. (TLRtheory's thread here: http://forum.xda-developers.com/showthread.php?t=1604731 was an especially good resource for getting started with Gamekeyboard).
-Thanks to my friend Sean, who recently got me interested in the Xperia Play and introduced me to Quake
-If you're curious to read more about the FTE engine, then check out this article by gb who provides a lot of detail about the FTE engine. It's not an android related article, but it's still an interesting read: http://spawnhost.wordpress.com/articles/introduction-to-the-fte-game-engine/
I hope I haven't forgotten to give credit or thanks to anyone. Also, this is my first time starting a thread like this, so (moderators) please let me know if anything needs to be changed. :good:

reserved if any updates are needed

Definitely going to have to try this!! Is it possible to run mods on here, too? I would love to be able to play Laser Arena on my Xperia!

pWEN said:
Definitely going to have to try this!! Is it possible to run mods on here, too? I would love to be able to play Laser Arena on my Xperia!
That's great! Please give some feedback after you try it out and share what you think about it. I'd also appreciate it if you could let me know if you like the way the Gamekeyboard profile is set up. I'm still pretty new to gaming on the Xperia Play and I mapped out the gpk to what seemed most comfortable for me. If there's a better way to get the controls set up for the Xperia Play, I'm open to changing things around.
Also, I'm going to try to upload an additional gkp that would work with the older Gamekeyboard v 4.0.1. I know that some people still have the older Gamekeyboard apps and would probably like to use that rather than the newer version.
As far as the mods question.... I'm not sure about other mods, but I don't think FTEDroid will run Laser Arena. I checked out your link and tried to run the game with FTEDroid tonight. It gave an error that said "Server is using protocol version 18, which is not supported by this version of FTE Quakeworld. (see the below screenshot from my phone). Maybe there's some other Android port out there that would run Laser Arena... it looks like a fun game .
Click to expand...
Click to collapse

I've never used Gameboard before. I see the Play site says it works on Xperia Play for Gingerbread. I'm running SlimBean, which I think runs Jellybean. Any idea if it'll still work?
I'll look into that server version thing. Maybe it can be patched to become compatible in some way.

pWEN said:
I've never used Gameboard before. I see the Play site says it works on Xperia Play for Gingerbread. I'm running SlimBean, which I think runs Jellybean. Any idea if it'll still work?
I'll look into that server version thing. Maybe it can be patched to become compatible in some way.
Click to expand...
Click to collapse
That would be cool if you could figure out a way to patch things so it would work. :thumbup:
You probably did the same thing, but I searched the SlimBean thread, LuPus V3, and Turbo JB kernel threads... and didn't see any mention of GameKeyboard. I went ahead and posted a question on the SlimBean thread to see if anyone knows if it's compatible with that ROM and kernels. I'm currently running rooted stock 2.3.4 Gingerbread with stock kernel, and it works great with that. If no one responds and if I can get the time, I may try to install SlimBean and test it out.

Hi pWEN,
I found this post where someone said that the "Gamepad" partially works with SlimBean (see here: http://forum.xda-developers.com/showthread.php?p=40996551#post40996551. They said the touchpads don't work, but it sounds like the hard keys probably do. (I think they were referring to the GameKeyboard app when they said Gamepad) .
When I play Quake1 on my Xperia Play with this port...I honestly find the touchpads too difficult to use due to lack of ability to precisely control player's movements... so I prefer using the hard keys anyway.
(EDIT: I tested out the Gamekeyboard app on SlimBean ROM with Lupus kernel v.13 and also with Turbo v3.1. Both the gamepad/ hard keys and the touchpads worked with the ROM & either kernel.

mattnmag said:
Hi pWEN,
I found this post where someone said that the "Gamepad" partially works with SlimBean (see here: http://forum.xda-developers.com/showthread.php?p=40996551#post40996551. They said the touchpads don't work, but it sounds like the hard keys probably do. (I think they were referring to the GameKeyboard app when they said Gamepad) .
When I play Quake1 on my Xperia Play with this port...I honestly find the touchpads too difficult to use due to lack of ability to precisely control player's movements... so I prefer using the hard keys anyway.
Click to expand...
Click to collapse
Ah, okay. I really love the touchpads so I'd be a bit disappointed if I couldn't use them, but it's not a deal-breaker. Can you link me to your thread so I can subscribe to it? I'll get Gamekeyboard on and try it out.
I dunno what ROM you're currently running, but SlimBean is pretty cool. It's got launcher and ROM customization built in, including theme support. Really speeds up the phone, too. Only issue seems to be that it requires an SD card to install some OS files to, which is irritating since the OS itself is only like 26 mb. I used the Lupus kernel, which is really nice, as it has TWRP custom recovery built into it. If you need any files, just let me know, took some detective work for me to find them all, but I've got them. I used this install guide, which was way more helpful than the one in the SlimBean thread.

pWEN said:
I dunno what ROM you're currently running, but SlimBean is pretty cool.
Click to expand...
Click to collapse
SlimBean does look cool and I'll probably try it out soon. Thanks for the install guide link. I'm just currently running stock rooted 2.3.4. (Edit: I used Titanium Backup Pro to debloat the stock ROM... so it's not just straight stock now).
pWEN said:
Ah, okay. I really love the touchpads so I'd be a bit disappointed if I couldn't use them, but it's not a deal-breaker. Can you link me to your thread so I can subscribe to it? I'll get Gamekeyboard on and try it out.
Click to expand...
Click to collapse
The touchpads are cool, but I'm hoping you'll like Quake with just the regular controls. If GameKeyboard doesn't work, you should be able to get a refund if you go back into the Play Store within 2 hours of buying it... (I just read on the news where Google increased the refund time window).
(Confirmed the the touchpads do work with Gamekeyboard using Lupus v13 or Turbo v3.1 with SlimBean ROM).
I'm not sure if this is exactly what you want, but the web link for this thread is:
http://forum.xda-developers.com/xpe...keyboard-6-t2868919/post55272665#post55272665. When you're logged in to your XDA account and at the thread , there should be a link at the top of the Web page that says something like "Subscribe to this Thread. "

mattnmag said:
I'm not sure if this is exactly what you want, but the web link for this thread is:
http://forum.xda-developers.com/xpe...keyboard-6-t2868919/post55272665#post55272665
Click to expand...
Click to collapse
No, I meant the link to the thread where you asked about Gamekeyboard. No worries, I'll fiddle with it.

pWEN said:
No, I meant the link to the thread where you asked about Gamekeyboard. No worries, I'll fiddle with it.
Click to expand...
Click to collapse
LOL... It didn't make sense to me that you would need the link to this Quake thread that I created... but I just wasn't sure what you meant. Sorry about that.
I asked about Gamekeyboard in the SlimBean thread: here.

pWEN,
I went ahead and flashed SlimBean and LuPuS JellyBean v13 Kernel 720p version ... (I also tried Turbo Kernel v3.1 ).
I can confirm that the phone's hard keys and the touchpads BOTH WORK using GameKeyboard with SlimBean and either one of these kernels. I also tested out the Multiplayer mode while running SlimBean and was able to connect into it (I attached a few screenshots below).
As far as the Quake game performance with SlimBean, I found that the game didn't run as smooth as it does on stock 2.3.4 GB. On Quake, the Turbo Kernel seemed to perform pretty good overall without needing to overclock... but with Lupus on Quake, it was really laggy and I had to overclock up to 1209 MHz to get it to stop lagging. (Using both kernels... I also tried to play one of my current favorite games (Aralon Sword & Shadow). With the Lupus kernel, Aralon really struggled and froze on me anytime I would toggle the Gamekeyboard controls while playing the game...even with the overclocking up to 1401 MHz. Aralon seemed to run smoother with Turbo kernel, but the game froze on me after playing it for a while. (Aralon runs smooth with very few hiccups running stock 2.3.4 GB/ stock kernel).
I'm pretty new to the Xperia Play and I'm not a developer (just an android enthusiast ). I'm not 100% sure what the best set up is for gaming on this device. I've read some thread posts, (example here: from darkharbinger81), where others report that with this device, Gingerbread seems to work better than JellyBean for gaming. So for now, I'll probably just stick with debloated 2.3.4 GB.
(Edit: I've played with SlimBean some more this evening and I'm really impressed with the ROM itself. It's put together really well and has lots of great features. I found the "Performance" settings where you can overclock and change Governors/Schedulers without even needing an app like SetCPU. If I wasn't using my Xperia Play soley for gaming, then I would seriously consider sticking with the SlimBean ROM).
(Random screenshots from Quake Multiplayer session -- connected into "XS4ALL - QUAKEWORLD FOD FREE FOR ALL"

mattnmag said:
*snip*
Click to expand...
Click to collapse
What settings did you change to overclock in SlimBean? I've never messed around with that before, but I think it might be a good idea (especially since Minecraft runs more laggy on SB than it does on stock).
Pretty cool that online multiplayer works. Have you tried adding bots? Is such a thing possible here?
I seem to remember someone ported Quake 3 Arena to Android. Ever tried that?

pWEN said:
What settings did you change to overclock in SlimBean? I've never messed around with that before, but I think it might be a good idea (especially since Minecraft runs more laggy on SB than it does on stock).
Pretty cool that online multiplayer works. Have you tried adding bots? Is such a thing possible here?
I seem to remember someone ported Quake 3 Arena to Android. Ever tried that?
Click to expand...
Click to collapse
You can access the overclock/governor/scheduler settings in SlimBean by going to phone's main settings menu, then "Performance," then they should be somewhere in there. :fingers-crossed: (I flashed back to stock GB last night and don't remember exactly where everything was). You probably know this, but If you decide to overclock, just be really cautious as it can damage your phone if you aren't careful. Here's a link to an overclocking discussion for our phone that gives some tips.
From what I can tell, Quake1 on FTEDroid doesn't have bots and I'm not sure if they can be added. I see in your profile that you have a background in game development and if you want to get some technical details on FTEDroid, I think that Spike (the FTEDroid developer) and the other FTE dev. team would be willing to chat with you on their FTE IRC channel. I chatted with him and a couple others on there briefly and they were nice and seemed open to discussion.
I think the Quake3 port you're talking about is Zeus Arena. It looks like it was pulled off of Google Play a while back due to development issues/terms of use issue... (I'm not sure what that means). My friend has it on his Xperia Play and I've played both Quake2 and Quake3 on it in Singleplayer mode. The game runs and looks great, but I had trouble using the controls well enough to effectively control the player. (Maybe I just need some more practice).

Yes, I'll definitely have to look for Zeus Arena!
Thanks for the link to the overclocking thread. I'll have to take a look later. I tried running FTE with Quake 1 as-is, and it's a bit laggy (and I'll definitely need that Gamekeyboard app). I've been trying to get on top of this Quake stuff, but all of my free time has been absorbed by work lately. So I'm trying to get as much information on it as I can, while I can.
I looked into bots, but so far haven't found a tutorial on setting them up with FTE (Android or no). A lot of this Quake stuff is as old as the game itself, but I feel my Google-fu is strong, so I'm sure I'll dig it up eventually. Omicron bots seem to be the best choice going by the forum debates.
Another question for you: You only mention Quake 1 on here, but shouldn't the mission packs work as well? I copied the pak0.pak files from the hipnotic and rogue folders to sister locations at the same level as the id1 folder, just as it shows up in my install directory (I got all of the Quake games through Steam). Not sure how to tell if they work or how I'd access them, though! And have you tried Quake 2 and its mission packs with this yet?

pWEN said:
Yes, I'll definitely have to look for Zeus Arena!
Thanks for the link to the overclocking thread. I'll have to take a look later. I tried running FTE with Quake 1 as-is, and it's a bit laggy (and I'll definitely need that Gamekeyboard app). I've been trying to get on top of this Quake stuff, but all of my free time has been absorbed by work lately. So I'm trying to get as much information on it as I can, while I can.
I looked into bots, but so far haven't found a tutorial on setting them up with FTE (Android or no). A lot of this Quake stuff is as old as the game itself, but I feel my Google-fu is strong, so I'm sure I'll dig it up eventually. Omicron bots seem to be the best choice going by the forum debates.
Another question for you: You only mention Quake 1 on here, but shouldn't the mission packs work as well? I copied the pak0.pak files from the hipnotic and rogue folders to sister locations at the same level as the id1 folder, just as it shows up in my install directory (I got all of the Quake games through Steam). Not sure how to tell if they work or how I'd access them, though! And have you tried Quake 2 and its mission packs with this yet?
Click to expand...
Click to collapse
I plan to test out Quake 2 on FTEDroid soon. It'll be great if it works.
I don't own mission packs for any of the Quake versions, so I can't test things out, but I'm wondering if you could just use a file explorer and temporarily cut the Quake 1 pak files out of sdcard/fte/id1 and place them in a different folder... then copy the mission pak files into sdcard/fte/id1. It would be a bit of a pain to move things around like that... but I wonder if it would let you run the mission packs. That's how I got Laser Arena to boot (though it didn't run because of the server issue).

mattnmag said:
I plan to test out Quake 2 on FTEDroid soon. It'll be great if it works.
I don't own mission packs for any of the Quake versions, so I can't test things out, but I'm wondering if you could just use a file explorer and temporarily cut the Quake 1 pak files out of sdcard/fte/id1 and place them in a different folder... then copy the mission pak files into sdcard/fte/id1. It would be a bit of a pain to move things around like that... but I wonder if it would let you run the mission packs. That's how I got Laser Arena to boot (though it didn't run because of the server issue).
Click to expand...
Click to collapse
Ah okay, cool. I started a thread over on QuakeOne with a bunch of questions for them about this. Here's the link!
Also, I set up overclocking on my phone. Didn't make Minecraft less laggy (SlimBean issue, I guess) until I turned off fancy graphics, but what can you do. lol

pWEN said:
Ah okay, cool. I started a thread over on QuakeOne with a bunch of questions for them about this. Here's the link!
Also, I set up overclocking on my phone. Didn't make Minecraft less laggy (SlimBean issue, I guess) until I turned off fancy graphics, but what can you do. lol
Click to expand...
Click to collapse
Too bad that the overclocking didn't help much. Maybe there's some other tweaks you can do to improve performance with SlimBean...maybe try out Turbo Kernel, as (IMO) it seemed to perform with less lagging when I tried it. And thanks man for starting that thread on Quake One Forums. I just don't possess the knowledge to even know what to ask Spike and the others.
I used the info from the QuakeOne discussion and loaded Quake2 and Quake 3 into FTEDroid. They both started up and I was able to connect with some limited servers... but more testing and playing around with it is needed to see if the games would be playable on our phones. Also, the GameKeyboard profile that I mapped out for Quake1 didn't work with the games that did connect... so we'd have to play around with Gamekeyboard and the config files to see if the controls could be remapped for each game. I took some screenshots of all of the different games that FTE says it can run (see content below). I don't think all of them work on the Xperia Play, but I'm blown away by the list of games.
Even if none of the other games work well for our phones... hopefully other Xperia Play owners can still have fun playing Quake1 in Singleplayer mode with FTEDroid. :good: I need to get into bed so I can get up for work tomorrow... but thanks again for your time with this considering your busy work schedule.

Android 7.0 (Nougat) compability
can it be done?
it says package is not compatible.. can't install

wernerml said:
can it be done?
it says package is not compatible.. can't install
Click to expand...
Click to collapse
Hello. I have not tried to play Quake on the Xperia Play in over 1 1/2 years, but these instructions worked for me when I last tried them.
Unfortunately, I won't be able to help with troubleshooting as I'm no longer using this device.