Hi. 2.3.6 What do I have to root my phone does not. please help
flash 2.2.1 then flash a rooted rom there is another way to do it but its to wordy to explain a million times totally the other people that don't read the forum so good luck....
Dani897 said:
flash 2.2.1 then flash a rooted rom there is another way to do it but its to wordy to explain a million times totally the other people that don't read the forum so good luck....
Click to expand...
Click to collapse
Add a link to not know too much about the situation you mentioned, please
ozgur_erdogan said:
Add a link to not know too much about the situation you mentioned, please
Click to expand...
Click to collapse
the Rogers method works... Yu already posted in that thread.
disable lagfix first if you want to keep it stock because the stock kernel doesn't support lagfix..
do that by creating /sdcard/Voodoo/disable-lagfix
the V is capital in Voodoo
Dani897 said:
the Rogers method works... Yu already posted in that thread.
disable lagfix first if you want to keep it stock because the stock kernel doesn't support lagfix..
do that by creating /sdcard/Voodoo/disable-lagfix
the V is capital in Voodoo
Click to expand...
Click to collapse
Hi my friend
What are ways to monitor them for my phone.?
Write to me please.
so I'm new to android.
doktorz rom for installing the Turkish language support
ozgur_erdogan said:
Hi my friend
What are ways to monitor them for my phone.?
Write to me please.
so I'm new to android.
doktorz rom for installing the Turkish language support
Click to expand...
Click to collapse
OK so you need a ported rom for Turkish.
you should download the rom you need ( it may have a bug where the first call has no audio, this is because its really for a different phone)
then get the gtg ultimate unbrick from the super thread in the development section.
then use Odin to flash the Rogers root kernel. the reboot may take over 5 minutes. if it gets stuck use the unbrick pachage to recover the phone, you will be on 2.2.1 if you do this so the root kernel will be different.
if it goes well and you don't need to unbrick then you will go into recovery ( hold the volume buttons and power till you see "Samsung" in white letters) once in recovery flash zip from sdcard, choose zip, find the rom.zip and flash it.
Dani897 said:
OK so you need a ported rom for Turkish.
you should download the rom you need ( it may have a bug where the first call has no audio, this is because its really for a different phone)
then get the gtg ultimate unbrick from the super thread in the development section.
then use Odin to flash the Rogers root kernel. the reboot may take over 5 minutes. if it gets stuck use the unbrick pachage to recover the phone, you will be on 2.2.1 if you do this so the root kernel will be different.
if it goes well and you don't need to unbrick then you will go into recovery ( hold the volume buttons and power till you see "Samsung" in white letters) once in recovery flash zip from sdcard, choose zip, find the rom.zip and flash it.
Click to expand...
Click to collapse
Do you have a video on the situation in which you bet?
I do not think I could have difficulty in understanding my English is not very good
Related
Hey huys, Im coming from the vibrant to att captivate, tmobile vibrant was very simple to flash with rom manager can I do that with the captivate as well?
The only thing rom manager is good for is making the first update.zip with cwm for flashing a rom from stock, otherwise if you are on a custom rom it really isn't needed at all as all of the roms have an extended power many to boot into cwm recovery and from there it is the exact same process...
Kool thanks it seems that this is the only way I can do it coming from stock. Because if I press all three buttoms to throw me into clock recovery when I hit reinstall packages it tells me the signature fail so im going to use rom manager hopefully I don't brick my phone wish me luck. By the way incase I brick my phone ia there a way to odin back to stock and if there is can you guide me where I can get those files
cal4877 said:
Kool thanks it seems that this is the only way I can do it coming from stock. Because if I press all three buttoms to throw me into clock recovery when I hit reinstall packages it tells me the signature fail so im going to use rom manager hopefully I don't brick my phone wish me luck. By the way incase I brick my phone ia there a way to odin back to stock and if there is can you guide me where I can get those files
Click to expand...
Click to collapse
Rom manager won't do you any good either. You need to look up 3e recovery and fix the signature problem
Sent from my HTC Vision
cal4877 said:
Kool thanks it seems that this is the only way I can do it coming from stock. Because if I press all three buttoms to throw me into clock recovery when I hit reinstall packages it tells me the signature fail so im going to use rom manager hopefully I don't brick my phone wish me luck. By the way incase I brick my phone ia there a way to odin back to stock and if there is can you guide me where I can get those files
Click to expand...
Click to collapse
Oh!! You are on stock 2.2 it won't work. Do a search for 3e recovery signing, all update.zip files have to be digitally signed to work, there is a fix where that is no longer required. Or since I'm guessing you have the update.zip already you could use odin to get back to 2.1 which had 2e recovery and not have to fix the 3e or need to root for rom manager to work either.
Edit: pirate you are a ghost slipping in invisibly while I'm replying
Is a virgin phone stock 2.2 just rooted by super one click. Where can I get the file to fix the signature
umm you could have used the search function and had it by now...
in any case its in this thread... http://forum.xda-developers.com/showthread.php?t=909213
how many times is this rom manager/3e question going to be asked TODAY? im counting 3 sofar.
i answered the other 2.
and im up to 6 this week. all new threads..
At least he's not hellbent on flashing cm7.
I haven't posted much on here but I have been reading since June/July. I had this problem but found the answer thanks to the search feature. That is why I didn't even flash a rom until a week ago. I wanted to be informed, understand how everything works, etc. Thanks to all of you devs. for your hard work!
I've tried everything I can think of to get ClockWorkMod working on the SGH-T959V. I have rooted the phone with SuperOneClick and I've installed ROM Manager. After I start rom manager and select 'Flash ClockworkMod'. I get a list of 4 phones and mine isn't listed, the closest one is the Samsung GalaxyS i9000 which I have tried but when I reboot into recovery I never get the ClockworkMod Recovery.
Any ideas are greatly appreciated.
Thanks.
Rom manager doesn't work with our phones to get cwm you have to flash a kernel that has it in it
Sent from my GT-P7510 using XDA
1) DO NOT use ROM Manager (or as Raver memorably put it, ROM Mangler) on this phone - you will mess it up.
2) Any of the modified kernels in the Development section will give you CWM. Try AntonX's kernel (assuming you are on a stock ROM) - I found it gave best results. Use the SGS Kernel Flasher from the Market/Play - it's the easiest way to install a new kernel.
3) Before asking any more questions, read Read READ. Read the guides and the stickies, then read them again. I have found the guides of lumin30 and juls317 to be very helpful.
If your phone is still on Froyo, then look in the Dev section for Krylon360's recovery. If you're on Gingerbread then read the post above this one as there are plenty of ROMs/kernels for this phone that have CWM.
Really man, do you read.
Sent from my SGH-T959V using xda premium
The easiest way is just get one of the one click packages. I just updated the thread today. Note it is a sticky thread. It will always be easy to find at the top of the dev forum
No need to flash the whole rom or fuss with odin or heimdall cli/frontend.
Lets keep the thread friendly. Please search
I have this phone does not work the USB port serves only for charging but not for USB and have root but I want to put the CWM recovery but only schoolmaster to install with pc odin or adb but I need to do it without pc I know that rom manager not served if anyone knows how to do it without something like flasisifi pc or kernel flasher is agradeceria
jet_98 said:
I have this phone does not work the USB port serves only for charging but not for USB and have root but I want to put the CWM recovery but only schoolmaster to install with pc odin or adb but I need to do it without pc I know that rom manager not served if anyone knows how to do it without something like flasisifi pc or kernel flasher is agradeceria
Click to expand...
Click to collapse
Since you are rooted already, yes it is possible. You can use https://play.google.com/store/apps/details?id=neldar.sgs.kernel.flasher&hl=en and select the custom kernel you want (since I'm assuming you're still on stock, the blastoff kernel from http://forum.xda-developers.com/showthread.php?t=1828171 works well - use SGS kernel flasher the first time, then flash again from CWM to get wifi working). On this phone, the kernel and the recovery are always together in the same file so by flashing a custom kernel you will get CWM.
That being said, I would recommend AGAINST doing this because if it fails you have no way of fixing things as your USB port doesn't work. So, be very careful - check your md5sum, download it again, and check the md5sum of the new file. If they match, then you're probably good to go. This warning also goes for anything else you may want to flash from CWM should you decide to go ahead.
xc-racer99 said:
Since you are rooted already, yes it is possible. You can use https://play.google.com/store/apps/details?id=neldar.sgs.kernel.flasher&hl=en and select the custom kernel you want (since I'm assuming you're still on stock, the blastoff kernel from http://forum.xda-developers.com/showthread.php?t=1828171 works well - use SGS kernel flasher the first time, then flash again from CWM to get wifi working). On this phone, the kernel and the recovery are always together in the same file so by flashing a custom kernel you will get CWM.
That being said, I would recommend AGAINST doing this because if it fails you have no way of fixing things as your USB port doesn't work. So, be very careful - check your md5sum, download it again, and check the md5sum of the new file. If they match, then you're probably good to go. This warning also goes for anything else you may want to flash from CWM should you decide to go ahead.
Click to expand...
Click to collapse
install the kernel reset and started then talk normal start and only lasted one minute and reboots and then does the same and when you step recovery all say wrong and even tinges the recovery of stock will not let me delete the data 'll have to reinstall the kernel or 'll have to do something else
jet_98 said:
install the kernel reset and started then talk normal start and only lasted one minute and reboots and then does the same and when you step recovery all say wrong and even tinges the recovery of stock will not let me delete the data 'll have to reinstall the kernel or 'll have to do something else
Click to expand...
Click to collapse
I'm not sure I understand what your current situation is. My interpretation is:
1) You went ahead and tried flashing a kernel
2) You can boot up normally but you reboot after about a minute.
3) You can't wipe anything in recovery
3) When you're getting error messages, please copy them out word for word what they are. There are many similar sounding error messages.
If I got any of the above wrong, let me know and we'll go from there. Also, when you're in recovery, does it say "3e" or CWM (ie is it the Stock recovery or not).
P.S. By posting in a variety of threads the same message, you will not get help faster and it will just make people want to help you less. If you keep everything in one thread then things stay organized and its easier for people to help you.
P.P.S. It sounds as if you're translating from a different language. If indeed you are, please paste the equivalent in your native language below (there's an off-chance I'll understand it).
xc-racer99 said:
I'm not sure I understand what your current situation is. My interpretation is:
1) You went ahead and tried flashing a kernel
2) You can boot up normally but you reboot after about a minute.
3) You can't wipe anything in recovery
3) When you're getting error messages, please copy them out word for word what they are. There are many similar sounding error messages.
If I got any of the above wrong, let me know and we'll go from there. Also, when you're in recovery, does it say "3e" or CWM (ie is it the Stock recovery or not).
P.S. By posting in a variety of threads the same message, you will not get help faster and it will just make people want to help you less. If you keep everything in one thread then things stay organized and its easier for people to help you.
P.P.S. It sounds as if you're translating from a different language. If indeed you are, please paste the equivalent in your native language below (there's an off-chance I'll understand it).
Click to expand...
Click to collapse
If you are in the correct idea that's what happens to me
I think the reason you do not understand me because I am from Mexico and speak Spanish English is difficult to read but I can write it if you want to write in Spanish but I doubt you understand me more
jet_98 said:
If you are in the correct idea that's what happens to mein the state you are in, can you get to
I think the reason you do not understand me because I am from Mexico and speak Spanish English is difficult to read but I can write it if you want to write in Spanish but I doubt you understand me more
Click to expand...
Click to collapse
Ok, I might be able to understand some of the Spanish as I speak French as well, but lets keep going in English.
Anyways, when you go into recovery (I assume you can still get into recovery), does it say <3e> or CWM? If it says CWM, is it red or blue? If its <3e>, then you're still on stock recovery and the kernel didn't flash properly.
Also, can you please go to Settings, About Phone, and read off the Kernel Version? If you can't get there, what is the last screen you see before it reboots?
Hi I am not sure if this has been covered in another post yet, but could someone please tell me if the developer community has found a way to return the infuse to froyo stock everything including the bootloader after flash the gb bootloader. Cause right now I am just itching to flash the new gb bootloader that Entropy512 has talked about in his post for the cm9 he was working on, but I want to make sure that in the event I have to take my infuse in for warranty service I will be able to return the phone to stock so that the att guy does not void and refuse the warranty.
Thank you guys so much
The CM9 by Entropy 5-19-2012
Here
Gtg Unbrick
Here
Infuse Root
Here
Custom Recovery
Here
Gapps File
Here
Huge thanks to those who made these wonderful programs and hacks to allow more functionality to our phones
Hats off to dman,qkster,Entropy512 and countless others that are always helping noobs like me in every thread i go to on xda
you guys have done a heck lot for the infuse 4g rooting community
thanks !
jerryeight said:
Hi I am not sure if this has been covered in another post yet, but could someone please tell me if the developer community has found a way to return the infuse to froyo stock everything including the bootloader after flash the gb bootloader. Cause right now I am just itching to flash the new gb bootloader that Entropy512 has talked about in his post for the cm9 he was working on, but I want to make sure that in the event I have to take my infuse in for warranty service I will be able to return the phone to stock so that the att guy does not void and refuse the warranty.
Thank you guys so much
Hats off to dman,qkster,Entropy512 and countless others that are always helping noobs like me in every thread i go to on xda
you guys have done a heck lot for the infuse 4g rooting community
thanks !
Click to expand...
Click to collapse
if im correct,you just have to flash a stock non-rooted rom..i do belive dman would be the one who has these available,but you can check hear:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S/SGH-I997
there are many stock rooted and none rooted.. this may help.
droid73 said:
if im correct,you just have to flash a stock non-rooted rom..i do belive dman would be the one who has these available,but you can check hear:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S/SGH-I997
there are many stock rooted and none rooted.. this may help.
Click to expand...
Click to collapse
Thanks for the link to the wiki for our phone but I know that we can just flash to the stock froyo through the gtg unbrick method which i used many times when i messed up my phone badly but like does the gtg unbrick method also allow me to return to the stock froyo bootloader though ?
thanks
jerryeight said:
Thanks for the link to the wiki for our phone but I know that we can just flash to the stock froyo through the gtg unbrick method which i used many times when i messed up my phone badly but like does the gtg unbrick method also allow me to return to the stock froyo bootloader though ?
thanks
Click to expand...
Click to collapse
Not sure..i havent tested it.but it doesnt hurt to try..
SENT FROM MY AEON v1.3.1 POWERED INFUSE..
thanks but i think i am going to hold off on the upgrade to the gb bootloader and just try flashing entropy's cm9 that he released 5-19 since over here in the q&a for it some was able to get the cm9 working without the gb bootloader. hope entropy will soon see this post and can help confirm if there is a true fix for this problem
edit
i just finished testing it and it works! I used entropy's 5-19-2012 edition of cm9
so this is what i did
first i returned my phone to stock with gtg ultimate unbrick
installed rom manager and root explorer.
rooted it. substituted the stock recovery with the custom one.
install cwm from rom manager.
reboot into recovery from within rom manager
do the reinstall packages no more than two times then you will be in the cwm
go to install install zip from the sdcard
****************** here is important part you must carefully remember and count how many times you will have to click the the volume down button to reach the gapps file and the ics zip file since you will not be able to see the list due to rainbows after flashing****************
then finally flash the zip
you will be stuck at samsung logo.
Reboot - you will get stuck at the Samsung screen
Reboot to recovery again using the three-finger salute - hold down VolUp+VolDn+Power until the device reboots, release Power after the reboot, continue holding VolUp+VolDn
Go to Mounts and Storage and format: system, data, cache
Use the number of clicks thatyou recorded earlier before the flash to find your ics install file
Flash this ZIP a second time, then flash gapps using the same method as above by your recorded clicks
Reboot and enjoy
\only bug so far is that there is a quick rainbow screen at the start of each boot but qucikly goes away and shows the normal cm9 boot animation and of course there would probly be the same bugs as decribed in entropy's OP over here. just finished gonna put it through its paces tmrw when I have time
Copied some steps from entropy's OP fro the cm9 \ thanks
jerryeight said:
thanks but i think i am going to hold off on the upgrade to the gb bootloader and just try flashing entropy's cm9 that he released 5-19 since over here in the q&a for it some was able to get the cm9 working without the gb bootloader. hope entropy will soon see this post and can help confirm if there is a true fix for this problem
Click to expand...
Click to collapse
I agree. Hope you get what you need.
SENT FROM MY AEON v1.3.1 POWERED INFUSE..
test
ignore
please ignore
sorry please ignore i need 8 posts so i can share with you the files i used to make the rom work for me
droid73 said:
I agree. Hope you get what you need.
SENT FROM MY AEON v1.3.1 POWERED INFUSE..
Click to expand...
Click to collapse
The CM9 by Entropy 5-19-2012
Here
Gtg Unbrick
Here
Infuse Root
Here
Custom Recovery
Here
Gapps File
Here
Huge thanks to those who made these wonderful programs and hacks to allow more functionality to our phones
jerryeight said:
thanks but i think i am going to hold off on the upgrade to the gb bootloader and just try flashing entropy's cm9 that he released 5-19 since over here in the q&a for it some was able to get the cm9 working without the gb bootloader. hope entropy will soon see this post and can help confirm if there is a true fix for this problem
edit
i just finished testing it and it works! I used entropy's 5-19-2012 edition of cm9
so this is what i did
first i returned my phone to stock with gtg ultimate unbrick
installed rom manager and root explorer.
rooted it. substituted the stock recovery with the custom one.
install cwm from rom manager.
reboot into recovery from within rom manager
do the reinstall packages no more than two times then you will be in the cwm
go to install install zip from the sdcard
****************** here is important part you must carefully remember and count how many times you will have to click the the volume down button to reach the gapps file and the ics zip file since you will not be able to see the list due to rainbows after flashing****************
then finally flash the zip
you will be stuck at samsung logo.
Reboot - you will get stuck at the Samsung screen
Reboot to recovery again using the three-finger salute - hold down VolUp+VolDn+Power until the device reboots, release Power after the reboot, continue holding VolUp+VolDn
Go to Mounts and Storage and format: system, data, cache
Use the number of clicks thatyou recorded earlier before the flash to find your ics install file
Flash this ZIP a second time, then flash gapps using the same method as above by your recorded clicks
Reboot and enjoy
\only bug so far is that there is a quick rainbow screen at the start of each boot but qucikly goes away and shows the normal cm9 boot animation and of course there would probly be the same bugs as decribed in entropy's OP over here. just finished gonna put it through its paces tmrw when I have time
Copied some steps from entropy's OP fro the cm9 \ thanks
Click to expand...
Click to collapse
Updated OP to include instructions and links to the files
Ok, so here goes a real noob question!
Although I am not a NOOB, but what I have read just seems a little outrageous.
Ok, So i have successfully rooted. I have seen some posts suggesting the use of ROM manager, and other saying NO.
I have read the NOOB guide, and that seems to be a little excessive to install a ROM onto this device.
Do you have to use the Heimdall method, because I do not have C++ installed, nor do I even know how to use it.
I want to get CWM installed, but I cant seem to find a method for just that.
So if I understand correctly, I have to install a Kernel w/CWM, then I can boot into CWM and flash a ROM onto the device?
I looked on the wiki, but some of the links there are broken, and there are missing files as well.
I really hate ask these kind of question, but I feel that I am really stuck here.
if someone could please help.
primus123 said:
Ok, so here goes a real noob question!
Although I am not a NOOB, but what I have read just seems a little outrageous.
Ok, So i have successfully rooted. I have seen some posts suggesting the use of ROM manager, and other saying NO.
I have read the NOOB guide, and that seems to be a little excessive to install a ROM onto this device.
Do you have to use the Heimdall method, because I do not have C++ installed, nor do I even know how to use it.
I want to get CWM installed, but I cant seem to find a method for just that.
So if I understand correctly, I have to install a Kernel w/CWM, then I can boot into CWM and flash a ROM onto the device?
I looked on the wiki, but some of the links there are broken, and there are missing files as well.
I really hate ask these kind of question, but I feel that I am really stuck here.
if someone could please help.
Click to expand...
Click to collapse
If you already rooted, which you stated that you are, then download an app called SGS Kernel Flasher. Then download any kernel you like for whatever firmware you are running (2.2 kernels for 2.2.1 and 2.3 kernels for 2.3.x) and flash with the app, Note- I recommended you flash this one if you are on 2.3:
http://forum.xda-developers.com/showthread.php?t=1513287
Once your phone reboots it should have the kernel successfully installed and you should be able to boot into recovery by powering down the phone completely and holding the volume buttons and the power button
primus123 said:
... So if I understand correctly, I have to install a Kernel w/CWM, then I can boot into CWM and flash a ROM onto the device?...
Click to expand...
Click to collapse
Yes you can use kernel flasher, from market, just make sure you're flashing a ROM/kernel with same os(froyo or gb) you have currently running... If moving from froyo to gb you can use odin
Sent from my SGH-T959V using xda premium
dude, why are you worried bout the C++ stuff?
Just download it from here and install it like an app, nothing fancy.
Hi guys I'm new to this flashing etc world. I used rom manager and installed the wrong clokworldmod and my phone only loads samsung galaxy s 4g screen. I saw the thread about not using rom manager but I already did yesterdey. I'm trying to gain access to download mode with odin but I'm not able to get in!
Drake316PR said:
Hi guys I'm new to this flashing etc world. I used rom manager and installed the wrong clokworldmod and my phone only loads samsung galaxy s 4g screen. I saw the thread about not using rom manager but I already did yesterdey. I'm trying to gain access to download mode with odin but I'm not able to get in!
Click to expand...
Click to collapse
yeah, ROM Manager is a bad thing when it comes to our phone.
ODIN does not put your phone in download mode. There are numerous ways to accomplish that and those are outlined in a few different posts here as well as the wiki.
Do you know if you were on Froyo or Gingerbread before you tried to flash something? Also, what ROM did you try to flash? Going from Froyo to Gingerbread, and vice versa, requires you to flash the proper boot loaders.
I suggest checking out Lumin30's [GUIDES] Fresh out of box Galaxy S 4G [SOLVED] | Heimdall One-Click For Dummies. Awesome guides and they should get you back to a working status.
Reply
I was on Gingerbread 2.3.6 something like that, I wanted to flash to Vahalla Black but didn't even get close to that process sorry for my english. I will check the guides thanks for the fast respond! Thanks again already on download mode!
No worries on the English; you did quite well
Let us know how it goes and if you need help. There are plenty of us here that can help. Once you get the one-click installed, you should be able to flash Valhalla Black with no problem.
Good luck!
Just fine I think
Sent from my SGH-T959V using xda premium
Thanks!!
Thank you very much!! Fixed my phone thanks to you and XDA! I will try to install a custom rom this time I hope to do it well thanks to the links you provided.
Question about flashing ROM
Hi, I fell I'm missing something I don't know where to start so I can flash my already rooted phone with Vahalla Black. Sometimes I read use CWM, other post dont use it,etc I feel lost here. Could you just let me know what I need to flash, software etc.
Drake316PR said:
Hi, I fell I'm missing something I don't know where to start so I can flash my already rooted phone with Vahalla Black. Sometimes I read use CWM, other post dont use it,etc I feel lost here. Could you just let me know what I need to flash, software etc.
Click to expand...
Click to collapse
Use the method in the guide in the first link of my signature. Look for Flashing Custom ROM's. You will be using CWM to get Valhalla Black on your phone. The guide has step by step directions.