[Q] [Help] Wrong Firmware, Phone Not Turning On - Samsung Galaxy SL i9003

Hello
Just upgraded my I9003 from Froyo to Gingerbread using Odin, after it finished my phone turned off and can't get it to work again.
Later I noticed that I used an I9000 firmware, any chance for it to work again or its lost ?

If you can somehow boot into download mode, yes it can be salvaged, if not no... maybe the service center can fix it
Sent from my GT-i9003 powered by MIUI

ibrahimmi said:
Hello
Just upgraded my I9003 from Froyo to Gingerbread using Odin, after it finished my phone turned off and can't get it to work again.
Later I noticed that I used an I9000 firmware, any chance for it to work again or its lost ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1120785

oh ,so bad.you just can use the itag fix it.

Related

[Q] start up problem in galaxy vibrant

frnds..
please help me..
i m using samsung galaxy vibrant from last 6 months (rooted and unlocked) today when i m switching on my phone...its taking too long time but not able get on...its only showing the process of waves and in between the phone is getting vibrated. i have removed the battery and i tried to switch on again..but same problem...
i donno what to do know..
Either you got an update that was no good, or your running a modded rom, try either putting a new rom on your phone. or Odin back to stock and you should be good to go! You can search how to odin back on goodle, its really simple.
hi thanks for reply..
yes i got the phone from US (T mobile) and got it unlocked in india. initially also there was some problem during unlocking and we have changed with my frnds help. can u explain in detail what is odin back and how to do that.
Deepak

Removing ClockWorkMod recovery

Hi guys, I need your help!
Yesterday I updated my phone from Froyo 2.2 to Gingerbread 2.3.5 with Kies, then I rooted it trough Odin and flashed the recovery with ClockWorkMod recovery (i followed the guide, and made everything it asked to do). I completed the task succesfully. But here comes the problems:
I turned the phone on and I wanted to use Wi-Fi connection but I couldn't! It was just saying "error" and in settings the MAC address was unavaiable. I found something on the web, like trying to dial *#*#526#*#* but it didn't work too ("Driving loading unsuccessful").
So I wanted to bring the phone back to the previous state, So i unrooted it (succesfully) but now I'm stuck with this ClockWorkMod recovery and I can't find a way to restore the original Samsung i9003 recovery because i can't find it anywhere and I don't even know if I can use another Samsung's one.
I tought that maybe reinstalling Gingerbread from zero could fix this problem, but I'm not even sure of that, neither on how to reinstall it. Damn, I'm truly an Android n00b
Thanks to everyone that will spend some time helping me!
If it can help, here some infos about my phone
I9003XXPN
Kernel Version: 2.6.35.7-CL482273 [email protected]#1
Version build: GINGERBREAD.XIKP2
Click to expand...
Click to collapse
marvin_kk said:
Hi guys, I need your help!
Yesterday I updated my phone from Froyo 2.2 to Gingerbread 2.3.5 with Kies, then I rooted it trough Odin and flashed the recovery with ClockWorkMod recovery (i followed the guide, and made everything it asked to do). I completed the task succesfully. But here comes the problems:
I turned the phone on and I wanted to use Wi-Fi connection but I couldn't! It was just saying "error" and in settings the MAC address was unavaiable. I found something on the web, like trying to dial *#*#526#*#* but it didn't work too ("Driving loading unsuccessful").
So I wanted to bring the phone back to the previous state, So i unrooted it (succesfully) but now I'm stuck with this ClockWorkMod recovery and I can't find a way to restore the original Samsung i9003 recovery because i can't find it anywhere and I don't even know if I can use another Samsung's one.
I tought that maybe reinstalling Gingerbread from zero could fix this problem, but I'm not even sure of that, neither on how to reinstall it. Damn, I'm truly an Android n00b
Thanks to everyone that will spend some time helping me!
If it can help, here some infos about my phone
Click to expand...
Click to collapse
Now, Do you want a guide on how to re-flash back to Gingerbread using ODIN? If so,It is here. And, I would like to tell you that on re-flashing the FW, you are going to void your warranty and you will be able to get rid of the CWM
Hope it helped you!
hi OP
I'm facing the same problem as you, right now waiting for dxkp9 download and reflash with Odin.
But if you somehow manage to solve this issue please share.
Hi!
I tried and I tried and I solved it! I flashed back the stock rom of I9003 with Gingerbread trough Odin. This removed ClockWorkMod and restored the phone as it was in the beginning. Problem solved, original recovery mode and wi-fi finally works!
marvin_kk said:
Hi!
I tried and I tried and I solved it! I flashed back the stock rom of I9003 with Gingerbread trough Odin. This removed ClockWorkMod and restored the phone as it was in the beginning. Problem solved, original recovery mode and wi-fi finally works!
Click to expand...
Click to collapse
+1 [Reflash, and CF-root without 'extras' and restore]

[HELP]MY SGSL Auto Reboot

Hi To All Master....
Any 1 Experience Galaxy SL Auto Reboot And Stuck At Samsung LOGO?Until Battery Drain Finish And off?
My Stock Rom is DXKB2 And After KIES Update to 2.3.5 DXKP9 Then the Problem Came On~abt 1 month Already still facing this problem??
Phone Status:
Rooted
Gingerbread SDSwap
before Root Already Having this Problem
Any Have this problem Pls Share How to solve,1 Big Thx Here.
(If not i'm going for Samsung warranty already)
30-1-2012
Just Back From Samsung SME Malaysia
i send my phone there to my friend another friend as a SME technician.
he just flash the firmware only(DXKP9)
Saying i flash wrong firmware....
Uploaded with ImageShack.us
the firmware they flash was the same firmware i update from kies==
i haven root it~just wanna see still having the problem or not==
31-1-2012 10.30am
Problem Came Again==
Stuck At Samsung Logo ,pull out battery and put back and on it and becam (Pseudo Factory Restore)
wait while going to look for the samsung Technician again>.<
1.45pm
Samsung SME claim a phone board for my i9003.
can you
list out the steps what you did after flashing the rom
From the day i start.
1st Time Update
Stock DXKB2 (feel laggy) Connect Kies PC Updated DXKP9 With 60% Battery
the next day this problem happen already
2nd Time
trying to solve Problem~
Reflash it to XXKPE 3 file Version
And Flash DXKP9 1 File
Keep Original no root no SDcard
Still Having Same Problem
3rd Time
REflash XXKPE And use it
Rooted
SDcard
And Gingerbread SDswap
4th Time
Reflash DXKF1 froyo 2.2.1 3file Version
Rooted
Froyo SDswap
this morning Stuck at Samsung Till Battery Drain and Auto off~(Without charging)
Before Update the rom to DXKP9 Gingerbread Via Kies
The phone is Rooted and SDswap.Nth Else
This is a known problem, look around for 'Pseudo Factory Reset' you will find all the information there, it is a hardware failure so if you are in warranty, give it back to them to change the board!
ThxQ
I am Consider send for waranty already.
[HELP]Posting in wrong section.
Please post in the correct section next time. This way the forum will be organised.
Ops.I'm New~
Sry Abt This.
Try to flash again b4 goin to service centre!
Sent from my GT-I9003 using xda premium
flash too many time already.
now using DXKF1 2.2.1 Still this problem.but better than DXKP9 2.3.5 .gingerbread .2.3.5 will pseudo reboot
Sent from my GT-I9000 using XDA App
Please post in the appropriate sections, the development forum is for rom/mod development, not assistance.
Just Back From samsung Center.
Same Problem is Back~look 1st Page
Just back from samsung SME
finally ~they changing the phone board for me==
Blu3skyR4in said:
flash too many time already.
now using DXKF1 2.2.1 Still this problem.but better than DXKP9 2.3.5 .gingerbread .2.3.5 will pseudo reboot
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
i got the same problem as you , send it to service center last week . until now still don't have any reply from them.
they will test reflash for you,
if cannot they change the phone board for you.
mine just came back a day,cos i know someone inside samsung.so they help me to warranty 1 day only.
till now been pass 12 hour already.haven seen any problem here.wait till next day.
mostly problem happen at night.when it stuck at samsung logo and have to pull out the bettery and fix back and on it again~but when on it ,it became pseudo factory restore.

[Q] SERIOUS HELP freezing

I flashed JB on my gt-n8013, and then i wanted to return back to ICS as Kno doesn't want to run. So i downloaded the GT-N8013 from Sammobile and flashed it in.
But when it's rebooting it's kept hanging on Samsung logo and doesnt want to run. what can i do. Help please
http://forum.xda-developers.com/showthread.php?t=2080366
try re-flashing.. or re-downloading the file... it might be corrupted
Well you need to boot into recovery and do a comple wipe unfortuantely you will lose all data
I would suggest to you that if you redownload the rom and it still does not work then you should try out a different rom, because it seems like you may have downloaded a rom for a similar tablet and now find yourself running into issues.
Sent from my GT-N7100 using xda premium
I Reflashed again JB UK 4.1.1 and it's working fine, but i can't switch back to ICS GT-N8013. I'm in exams' period and some of my studies on Kno :S and i can't get it working, i contacted them and told me they're still working on a JB version :S
Thanks all
Boot to recovery Factory reset .
Flash stock ICS rom via Odin .
jje
You will loose ALL data on internal card so back up before doing this...
AbdallahSaied said:
I Reflashed again JB UK 4.1.1 and it's working fine, but i can't switch back to ICS GT-N8013. I'm in exams' period and some of my studies on Kno :S and i can't get it working, i contacted them and told me they're still working on a JB version :S
Thanks all
Click to expand...
Click to collapse
I'm having the exact same problem could you please post a direct link to the package that finally worked, what flags did you check in odin?
What he did was went from JB to JB for 8010 when JB to ICS did not work so he did not get it to work
Unfortunately there is no workaround when you go from JB to ICS you need to do a complete wipe to make it work

i Need help pleas!

Hello guys i have a samsung galaxy s3 verizon was working amazing in 4.3.2 the wifi was cool everything was good untile i want to install a recovery so i did a factory reset then ive tried to unlock the bootloader so the phone bricked
nut fixed it with 16gb memory card and it booted all the way . after the boot the wifi worked so i get to playstore and installed terminal to get the boot back in the phone
ok the phone boot up good like new without memory card installed but after so i left it for charging after a 2h ive tried the wifi it wont turn on n i have knox alert
i stoped knox with super su but the wifi actually just wont turn on
ive did everything cant find how to get it back again
ive tried also safestrap its working and ive installed a rom but still the wifi wont enable
well what i noticed is that before the phone bricked (and factory reset) it used to be 4.3.2
now its 4.3
and i cant get updates frome the phone
.......
baseband version i535VRUCML1
buil number : JSS15J.I535VRUCNC1
PLEAS tell me what to do my phone is useless without wif
saberlv said:
Hello guys i have a samsung galaxy s3 verizon was working amazing in 4.3.2 the wifi was cool everything was good untile i want to install a recovery so i did a factory reset then ive tried to unlock the bootloader so the phone bricked
nut fixed it with 16gb memory card and it booted all the way . after the boot the wifi worked so i get to playstore and installed terminal to get the boot back in the phone
ok the phone boot up good like new without memory card installed but after so i left it for charging after a 2h ive tried the wifi it wont turn on n i have knox alert
i stoped knox with super su but the wifi actually just wont turn on
ive did everything cant find how to get it back again
ive tried also safestrap its working and ive installed a rom but still the wifi wont enable
well what i noticed is that before the phone bricked (and factory reset) it used to be 4.3.2
now its 4.3
and i cant get updates frome the phone
.......
baseband version i535VRUCML1
buil number : JSS15J.I535VRUCBC1
PLEAS tell me what to do my phone is useless without wif
Click to expand...
Click to collapse
Hmmm you sure of that build number ending in BC1? I know NC1 and NE1 were two but I've never seen that one in particular
And 4.3.2 was never an android version. I think your referring to 4.4.2
Sent from my Nexus 5
ShapesBlue said:
Hmmm you sure of that build number ending in BC1? I know NC1 and NE1 were two but I've never seen that one in particular
And 4.3.2 was never an android version. I think your referring to 4.4.2
Sent from my Nexus 5
Click to expand...
Click to collapse
yes its nc1 im sorry for the mistake
but what should i do to get my wifi back thats the real question
saberlv said:
yes its nc1 im sorry for the mistake
but what should i do to get my wifi back thats the real question
Click to expand...
Click to collapse
The only thing I can think to do is to Odin back to stock at this point
Sent from my Nexus 5
ShapesBlue said:
The only thing I can think to do is to Odin back to stock at this point
Sent from my Nexus 5
Click to expand...
Click to collapse
ill do it n see
thank u brother ill tell if it works
but what if it didnt should i open the phone n see if any hardware prob?
saberlv said:
ill do it n see
thank u brother ill tell if it works
but what if it didnt should i open the phone n see if any hardware prob?
Click to expand...
Click to collapse
Only if you know what your doing otherwise I highly advise against it
Sent from my Nexus 5
ShapesBlue said:
Only if you know what your doing otherwise I highly advise against it
Sent from my Nexus 5
Click to expand...
Click to collapse
it actually work after flashing odin i dont know my baseband now is nc1 i think i was doing wrong by flashing ml1 modem that was the problem thanks alot bro :highfive: :laugh:

Categories

Resources