[Q] How to install cyanogenmod 7.2 on galaxy fit - Samsung Galaxy Fit GT 5670

Hey guys i am new on here and i saw several posts like cyanogenmod rc2/3/4...i am using official gingerbread ddkq5.can anyone pls tell me how to install cyanogenmod?and what is meant by rc??

Download the cyanogen .zip file anand put on ur sd card.
Turn off ur phone.
Restart by pressing the power button n home key together. This will take u in the recovery mode.
Now choose install zip from sd card in recovery mode. (Touchscreen doesn't work, use volume keys)
Choose ur cyanogen .zip file and apply update.
Clear cache and factory reset.
Reboot ur phone.
-
Fit + CYANOGEN 7.2
PRESS THANKS IF THIS HELPS !
-
visit atulmaharaj.com for unique recipes.

Related

flashble Clockwork mod recovery

WARNING
i will not responsible for any damage caused to ur phone by flashing this recovery!!!!
DO AT UR OWN RISK
hi friends,,
here is clockwork mod recovery which is flashble through default Android recovery
working 100%
INSTRUCTIONS (for noobs )
1)download this .zip file and put it in Ur root of sd card and not in any folder!!!
2) now switch of ur phone
3)in swich off mode press the power key and home key together until the phone starts
4)this will bring you in default android recovery (if you have not flashed any other recovery)!!!!
5) now here touch will not work so ok/enter action will performed by home key, up-down action will be performed by volume keys..
6)now go to the option- "apply udates from sd card" and press home key.
7) this will bring you in sd card and now select this flashable zip file and press home key then u will be warned that- do not do this!! ingnore warning press yes, then recovery will apply the zip file updates...
its done !!!!
what does IT DO????
only replaces ur default recovery by clockwork mod recovery!!!!
DOWNLOAD HERE
thanks to mr. Tj_styles for making this recovery for galaxy fit...
press thanks button if i helped you!!!
kkkk.....its cool
Did any one tried
Did long before.....
sarvesh563 said:
WARNING
i will not responsible for any damage caused to ur phone by flashing this recovery!!!!
DO AT UR OWN RISK
hi friends,,
here is clockwork mod recovery which is flashble through default Android recovery
working 100%
INSTRUCTIONS (for noobs )
1)download this .zip file and put it in Ur root of sd card and not in any folder!!!
2) now switch of ur phone
3)in swich off mode press the power key and home key together until the phone starts
4)this will bring you in default android recovery (if you have not flashed any other recovery)!!!!
5) now here touch will not work so ok/enter action will performed by home key, up-down action will be performed by volume keys..
6)now go to the option- "apply udates from sd card" and press home key.
7) this will bring you in sd card and now select this flashable zip file and press home key then u will be warned that- do not do this!! ingnore warning press yes, then recovery will apply the zip file updates...
its done !!!!
what does IT DO????
only replaces ur default recovery by clockwork mod recovery!!!!
DOWNLOAD HERE
thanks to mr. Tj_styles for making this recovery for galaxy fit...
press thanks button if i helped you!!!
Click to expand...
Click to collapse
Hey I have posted it long time before...
adityam533 said:
Hey I have posted it long time before...
Click to expand...
Click to collapse
ur recovery was for gmini.. also it can not flash cynamobile and much more roms and updates....
straight way saying there is mismatch of md5 sums in ur recovery
sarvesh563 said:
ur recovery was for gmini.. also it can not flash cynamobile and much more roms and updates....
straight way saying there is mismatch of md5 sums in ur recovery
Click to expand...
Click to collapse
Ya..Ur RECOVERY IS A CRAP!...
sarvesh563 said:
ur recovery was for gmini.. also it can not flash cynamobile and much more roms and updates....
straight way saying there is mismatch of md5 sums in ur recovery
Click to expand...
Click to collapse
lol coz of ur recovery i downloaded one 132 MB rom 3 times .. thought there was error in rom ... !!

[Q] Installing Custom Rom

I want to install a custom rom on my phone for the first time,,, I am a noob, so can any one guide me the exact process what i have to do to install a custom jelly bean rom.
My phone is currently on stock gingerbread 2.3.6
My phone is unrooted, so please guide me step by step, to root it and to install a custom rom.... I hope somebody helps me...
I think after some search you should have learnt :thumbup:
But i'll give an advise ,firstly search cf root file which is suitable one according to your baseband like xxkpq etc.
Sent from my GT-I9003 using xda app-developers app
best way to do it bug free is...
first get the odin software in pc , then download the stock xxkpe rom (google them to get) . Now download the cf-root for xxkpe rom (i9003) .
mostly you will get the procedure for installing and rooting on the same page from where u'll download the above mentioned files (its in very easy steps).. Now when you are successfully rooted , download the CM10 alpha 4 (jelly bean for i9003) from xda , also get the latest gapps file.
Now store these two zip files (DO NOT EXTRACT THEM) in your memory card (don't put them in folders) , now power off the phone & restart in recovery mode (vol up+ home+power) then go to wipe data/fact. reset and hit ok, also clear the db data in advance menu , once done go to 'install zip from sd card' then select the CM10 file & install ....after installing , again do wipe data then go to 'reboot in recovery' (this will reboot ur phone and take u back to recovery menu) . Now again install zip from sd card & this time select the gapps file. once done go to reboot device. Now ur phone will boot in CM 10 style (first boot takes much time so be patient) & DONE ......congo, you have now a galaxy i9003 with jelly bean ........and now you are free to try all cm10 based roms like x-gamerz, ehndroix , etc just flash them from recovery as directed by the developer of that specific rom......hope it helped..
Sent from my GT-I9003
HIT THANKS IF HELPED!!!
glydarzx said:
best way to do it bug free is...
first get the odin software in pc , then download the stock xxkpe rom (google them to get) . Now download the cf-root for xxkpe rom (i9003) .
mostly you will get the procedure for installing and rooting on the same page from where u'll download the above mentioned files (its in very easy steps).. Now when you are successfully rooted , download the CM10 alpha 4 (jelly bean for i9003) from xda , also get the latest gapps file.
Now store these two zip files (DO NOT EXTRACT THEM) in your memory card (don't put them in folders) , now power off the phone & restart in recovery mode (vol up+ home+power) then go to wipe data/fact. reset and hit ok, also clear the db data in advance menu , once done go to 'install zip from sd card' then select the CM10 file & install ....after installing , again do wipe data then go to 'reboot in recovery' (this will reboot ur phone and take u back to recovery menu) . Now again install zip from sd card & this time select the gapps file. once done go to reboot device. Now ur phone will boot in CM 10 style (first boot takes much time so be patient) & DONE ......congo, you have now a galaxy i9003 with jelly bean ........and now you are free to try all cm10 based roms like x-gamerz, ehndroix , etc just flash them from recovery as directed by the developer of that specific rom......hope it helped..
Sent from my GT-I9003
HIT THANKS IF HELPED!!!
Click to expand...
Click to collapse
Dude you forget ddlf2 step!!!!!
Correct steps: xxkpe/ddlf2/root ddlf2/flash cm10/enjoy...
Sent from my GT-I9003 using xda premium
No dude,this is also a possible way,as i did.
-xgamerz v3-
I followed these videos to root my i9003 and install Jelly Bean:

BLU Quattro 4.5 rom list and how to instructions

Found this online. *****this is not my work****** All credit goes to the author quattrodevelopment.blogspot.com
Here is a step by step with roms included for the 4.5 quattro Not the HD or 5.7 HD maybe soon.
Disclaimer: These ROMs/Recoveries are only intended for the BLU Quattro 4.5, or the K-Touch v9(which is the chinese version) These WILL NOT work on the 4.5HD or 5.7HD devices(I will release ROMs/Recoveries specifically for your device at a later time)
Drivers: https://copy.com/BUMmsS9rhLJe
English Recovery: https://copy.com/XZxTDht2lQiz
Gapps(4.2) https://copy.com/utkbZgwRpsVB
Gapps(4.1) https://copy.com/pSd8SsqU9pdI
ROMs With Less Bugs: MIUI v5 (4.1) https://copy.com/sbmcN6PHwFfi CM/AOKP Hybrid? JB (4.1) https://copy.com/VeLz1VLbkNNI Shendu ROM 4.1(Modified/Tweaked by me) https://copy.com/NwiFnlO8JAek
ROMs With More Bugs: Cyanogenmod 10.1 (4.2) https://copy.com/8kt2EAU2ll8y
1- Download the drivers from link posted above, and extract it to the folder of your desire. Now turn the phone off, and hold Vol+ (volume up button) and Power button at the same time until you see a green screen, then release both buttons immediately. You should now be in APX mode(nvflash) it will be a black screen
2- Connect phone to computer via usb cable. Now you should get a pop-up window about installing drivers, you're going to want to choose to browse computer for driver software manually. Then choose let me pick from a list of device drivers on my computer, and click have disk. Now you're going to browse to the location where you extracted the drivers to, and click on it(Ignore warning if it pops up, and choose install)
3- Assuming everything went as planned, now download the recovery and extract it to the location you desire(must be in a directory that you can issue adb commands from) inside of that folder, locate a file named recovery.bat. Double click on that file and a command prompt with a bunch of chinese pops up. Give it a second and press enter, it will go through the process and flash a recovery onto your phone
4- After everything is done, hold down the power button for about ten seconds(until the device powers off) Power the device back on normally, and download the ROM/ROMs if you haven't already and place them on the internal or external sd card(your choice) With device connected to pc, open command prompt and type in "adb reboot recovery" (without quotes) and the device will boot into recovery mode
5- Now that we have an English recovery, the translations below aren't really needed. However, I'm going to leave them up for a few days, just until everybody can transition to the English recovery. They will be deleted after that!
Recovery Main Menu: -Reboot -Install from SD card -Wipe Data/Factory Reset -Wipe Cache -Backup&Restore -Mount/Format -Advanced
Install From SD Card Menu: -Install zip from external SD -Apply update.zip -Unknown* -Install zip from internal SD
Backup&Restore Menu: -Backup -Restore -The rest are unknown*
Advanced Menu: -Reboot Recovery -Wipe Dalvik Cache -The rest are unknown*
To install ROM- In recovery mode, Factory Reset/Wipe Cache/Wipe Dalvik Cache. Then choose install zip from sd card(then choose internal or external and locate the ROM you want to install) After that you need to do the same thing to install the gapps package(you need the gapps package for google apps to function) once all is done, reboot and wait(it takes a while to boot the first time after flashing new ROMs, it has to rebuild the Dalvik cache)
NOTE: In case you aren't familiar with flashing ROMs, once you click on something( "backup" for example) a menu pops up pretty much asing you if you're sure you want to do that. It will have a bunch of lines of the same thing(which is no) and then one of the lines will have a bunch of writing beside it(which means yes). Also BEFORE you flash any ROMs, make sure you factory reset/wipe cache/and wipe dalvik cache, then you can flash the ROM and gapps package
*These will be updated regularly, as I discover what they are **More ROMs to come!
Internal Memory
The "BLU Quattro 4.5" has 4GB internal memory partitioned into 0.98GB for ROM and apps and an internal usb-memory of 1.63GB.
Is it possible to merge or resize the partitions?
I have 16GB external SD so the 1.63GB internal reserved usb-memory is useless and I still having trouble out of space in primary partition.
Thanks and sorry my english =/
TechSoft said:
Found this online. *****this is not my work****** All credit goes to the author quattrodevelopment.blogspot.com
Here is a step by step with roms included for the 4.5 quattro Not the HD or 5.7 HD maybe soon.
Disclaimer: These ROMs/Recoveries are only intended for the BLU Quattro 4.5, or the K-Touch v9(which is the chinese version) These WILL NOT work on the 4.5HD or 5.7HD devices(I will release ROMs/Recoveries specifically for your device at a later time)
Drivers: https://copy.com/BUMmsS9rhLJe
English Recovery: https://copy.com/XZxTDht2lQiz
Gapps(4.2) https://copy.com/utkbZgwRpsVB
Gapps(4.1) https://copy.com/pSd8SsqU9pdI
ROMs With Less Bugs: MIUI v5 (4.1) https://copy.com/sbmcN6PHwFfi CM/AOKP Hybrid? JB (4.1) https://copy.com/VeLz1VLbkNNI Shendu ROM 4.1(Modified/Tweaked by me) https://copy.com/NwiFnlO8JAek
ROMs With More Bugs: Cyanogenmod 10.1 (4.2) https://copy.com/8kt2EAU2ll8y
1- Download the drivers from link posted above, and extract it to the folder of your desire. Now turn the phone off, and hold Vol+ (volume up button) and Power button at the same time until you see a green screen, then release both buttons immediately. You should now be in APX mode(nvflash) it will be a black screen
2- Connect phone to computer via usb cable. Now you should get a pop-up window about installing drivers, you're going to want to choose to browse computer for driver software manually. Then choose let me pick from a list of device drivers on my computer, and click have disk. Now you're going to browse to the location where you extracted the drivers to, and click on it(Ignore warning if it pops up, and choose install)
3- Assuming everything went as planned, now download the recovery and extract it to the location you desire(must be in a directory that you can issue adb commands from) inside of that folder, locate a file named recovery.bat. Double click on that file and a command prompt with a bunch of chinese pops up. Give it a second and press enter, it will go through the process and flash a recovery onto your phone
4- After everything is done, hold down the power button for about ten seconds(until the device powers off) Power the device back on normally, and download the ROM/ROMs if you haven't already and place them on the internal or external sd card(your choice) With device connected to pc, open command prompt and type in "adb reboot recovery" (without quotes) and the device will boot into recovery mode
5- Now that we have an English recovery, the translations below aren't really needed. However, I'm going to leave them up for a few days, just until everybody can transition to the English recovery. They will be deleted after that!
Recovery Main Menu: -Reboot -Install from SD card -Wipe Data/Factory Reset -Wipe Cache -Backup&Restore -Mount/Format -Advanced
Install From SD Card Menu: -Install zip from external SD -Apply update.zip -Unknown* -Install zip from internal SD
Backup&Restore Menu: -Backup -Restore -The rest are unknown*
Advanced Menu: -Reboot Recovery -Wipe Dalvik Cache -The rest are unknown*
To install ROM- In recovery mode, Factory Reset/Wipe Cache/Wipe Dalvik Cache. Then choose install zip from sd card(then choose internal or external and locate the ROM you want to install) After that you need to do the same thing to install the gapps package(you need the gapps package for google apps to function) once all is done, reboot and wait(it takes a while to boot the first time after flashing new ROMs, it has to rebuild the Dalvik cache)
NOTE: In case you aren't familiar with flashing ROMs, once you click on something( "backup" for example) a menu pops up pretty much asing you if you're sure you want to do that. It will have a bunch of lines of the same thing(which is no) and then one of the lines will have a bunch of writing beside it(which means yes). Also BEFORE you flash any ROMs, make sure you factory reset/wipe cache/and wipe dalvik cache, then you can flash the ROM and gapps package
*These will be updated regularly, as I discover what they are **More ROMs to come!
Click to expand...
Click to collapse
Please rename this For Others Such as [GUIDE]BLU Quattro HowtoRoot/Rom list. Thanks for the awesome Guide!
alanfrank said:
The "BLU Quattro 4.5" has 4GB internal memory partitioned into 0.98GB for ROM and apps and an internal usb-memory of 1.63GB.
Is it possible to merge or resize the partitions?
I have 16GB external SD so the 1.63GB internal reserved usb-memory is useless and I still having trouble out of space in primary partition.
Thanks and sorry my english =/
Click to expand...
Click to collapse
I've found this: http://forum.xda-developers.com/showthread.php?t=1171531
Any idea if this can be used with another phone them the LG one he have used in the guide?
I cant post in the thread because Im new user here =/
problem
I have done everithing you said, and my cell freezes on boot forever, now what????
BLU Quattro 4.5 HD & 5.7
Need to know how to restore both devices to stock. Any aplication ODIN like to restore it back to stock from the download mode?
Please help me root, i try binary method but i just get boot loop.
Recovery + Root My experience
Hello... I got my BLU Quattro 4.5 (D440) a while back, didn't fuzz with it much right off. The Stock ROM was sluggish at best thought there was even an issue with the Digitizer/screen. But this thread was extremely helpful. I am now running Shendu ROM 4.1.2 one of the suggested ROM's above. I tried the other 2 first and they were mostly in Chineese and I had an especially hard time getting them switched over to English. Either way onward to the point. I have put together a few helpful tips-tricks for my experience with this phone and its phoenix transition to an awesome handset. Thats right now this is my daily driver and I love it! See below hope its helpful.
BLU Quattro 4.5 (440D) GSM Recovery+Root
These steps for this phone only!! Not responsible for any issues.
1. download ROM's, Recovery, & Driver from XDA (this thread)
http://forum.xda-developers.com/showthread.php?t=2327417
2. Enable USB Debugging! Go into Apps-Settings-DevOptions - Check box for USB Debug
3. Have original USB cord if handy! I tried with a Samsung OEM cable but no luck getting drivers to stick. Use original is best. (If you have one.)
Plug in USB Cord to PC then Phone and see if windows detects drivers. let it. It wont get the ones u need later, but what it does find is for USB storage. (you can move over your ROM's/Gapps to storage, downloads folder is a good spot).
4. Go to... http://junefabrics.com/android/downloadold.php to get pdanet software. Install it and it will give i the right drivers for ADB support. I used 4.01 to match the android version currently on my phone.
5. Extract the Driver provided from XDA. Put it in a folder with the ADB commands. Or you can get it all here... http://downloadandroidrom.com/file/GalaxyNexus/rooting/GalaxyNexusRootNew.zipn <-- I know this isn't for BLU but, if you extract this to a folder, and also add the drivers extracted to it as well this works! I've done it.
6. Extract the English Recovery to the same folder.
7. Turn off your phone. Hold down Vol up and Power button for about 5-9 seconds. Once you see a green screen let go of both. Screen may flicker then go black but the icons at the bottom will stay lit. You are now in APX mode (nvflash) mode. (as stated above in original post)
8. Check your Win 7 PC device manager. For a Phone device with ADB. If you you may need to update driver with the one that came from XDA, but the PDANet software should make it work.
8. Go to the folder and find Recovery.bat file (may have Chinese in file name. Double click and a command prompt window will pop up with a bunch of unknown characters, wait 5 sec then hit enter. The batch file should take of pushing the necessary recovery through ADB to the phone. It will error if it can't.
9. If completes OK. Push power for 7-9 seconds to power off the phone. Hit power like normal to turn it back on. It will boot up like normal (or it should).
10. USB is still connected this whole time and you can open a command prompt window. Navigate to the folder you placed the Recovery into. Something like user/username/desktop/BLU/recovery..etc)
Type ADB devices....it should show you that is is connected to your device. Then type " adb reboot recovery " and the device should reboot, give it some time.
11. Once in recovery. Best to do a backup of the original ROM & system. that way you can get back into recovery if anything goes wrong and wipe out the problem by restoring and starting again.
After you backup === you can get into recovery without the command being typed in or even being connected to your PC.... By holding Vol up + Power till you see the green screen then let go of power but keep holding Vol up till you see the BLU Products boot screen then let go ===
Clockworkmod Recovery should be on your screen.
you can reboot phone now and get back to original with no changes. Or you can venture into the world of loading ROM's (There in your downloads folder if you saved them in Step 3)
ROM 101
BACKUP-BACKUP-BACKUP 1st thing once in Recovery ...can't stress enough how much of trouble you can keep yourself out of by keeping an original backup.
As I stated before the Shendu ROM + Gapps is running smooth and all features I've been trying are working flawlessly!! Thanks to original post for getting me going. Just thought I'd add my 2 Cents.
Ok, here are the BEST 2 ROMS for this Phone:
Android 4.0.4(close to vanilla) : MEGA
Cyanogenmod 10.2 (Android 4.3.1) : (some audio and video issues, in BETA version ) MEGA
Need to merge internal partitions ? (merge memories) this one really "resize" the partitions (first one 1,7GB, another one new size is 2Mb) the flash.cfg file you need to flash:
This phone dont have notificaion led, fixed with this app: MEGA (flash the botton menu buttons)
Altomugriento said:
Ok, here are the BEST 2 ROMS for this Phone:
Android 4.0.4(close to vanilla) : MEGA
Cyanogenmod 10.2 (Android 4.3.1) : (some audio and video issues, in BETA version ) MEGA
Need to merge internal partitions ? (merge memories) this one really "resize" the partitions (first one 1,7GB, another one new size is 2Mb) the flash.cfg file you need to flash:
This phone dont have notificaion led, fixed with this app: MEGA (flash the botton menu buttons)
Click to expand...
Click to collapse
Can you explain the merge memories procedure? it will be reaaaaally needed!!
tryed from a spanish forum with no luck
thanks
dinizbruno said:
Can you explain the merge memories procedure? it will be reaaaaally needed!!
tryed from a spanish forum with no luck
thanks
Click to expand...
Click to collapse
Do you try the procedure posted in 3dgames . com . ar? ( its my work translated from the 592zn page, all the credits for the chinesse people)
Anyone tried the K-touch V9 kit kat in the BLU??
www
needrom
com/
download/
k-touch-v9-miui-v5-kk
Yes, those roms (v5) are very slow. Just use the 4.0.4 stock.
I want to try the JB stock, but i can´t find the official one anywhere.
Blu quattro 4.5 official rom to download, after you delete the bloatware and put a nice and clean theme you´ll get a nice speed.
orig D440 (quattro 4.5) rom
You can find the rom on google plus under BLU Products Development search for the model!
Hope that helps. I took your advice tonight and I am back running old school. Works ok husfar
I need phone.apk of this rom for Blu Quattro
Trozzul said:
Please rename this For Others Such as [GUIDE]BLU Quattro HowtoRoot/Rom list. Thanks for the awesome Guide!
Click to expand...
Click to collapse
I need phone.apk for blu quatro
please send me the file
[email protected]

device stock in clockword recovery 6.3.0.6 and donot open

i tried Installing CWM Recovery on my CALAXY CORE I8262 and when i press Volume up +Home Key +Power Key the phone
shaking and not go to CWM Recovery it bootup the system and when press Volume down +Home Key +Power Key it asked me to continue press volume up and when do it bootup to the system again then i go to setting backup and reset i press restore factory it the phone reboot and show clockword recovery 6.3.0.6 i press factory rest then rebot the phone it open again in clockwork recovery and i choose install zip from sd card i have cusom rom in sdcard and the system dont show me the rom in the sdcard then i out sdcard and try it in onther phone and the cusom Rom is already there and when i put it back and press install zip from sd card it don't detect card and show me 0 and clochwash and, odin and kies don't reconzgines it and arealady install samsung driver to computer please help me
If you are installing stock rom then
1. Switch off your phone.
2. Boot it in DOWNLOAD mode not in (CWM Recovery mod). You can so by pressing VOLUME DOWN + HOME + POWER BUTTON.
3. Then connect it to PC using USB cable.
4. Place the downloaded stock ROM in ODIN folder and open up ODIN.exe file (it will detect your phone in few seconds but if it doesn't detect then install samsung drivers and try again).
5. Then click on PDA button and choose PDA button. REMEMBER to uncheck REPARTITION.
6. Final click on START button wait for the flashing to get completed.
-------------------------------------------------------------------------
II ) if you are installing custom ROM through CWM Recovery then keep the custom ROM in root folder of SD card it means just in the location that you see just after opening the SD card on PC. Don't place it in any folder.
More over if you are flashing the new Cathezilla ROM then don't do it right now because it is not working right now. Wait for the developer and others to test.
You will have to flash stock rom through ODIN
Sent from my GT-I8262 using XDA Premium 4 mobile app
thanx thanx thanx thanx thanx thanx thanx thanx bro it work thanx very much

instal lineage(cm) 14.1 in samsung galaxy *(gt-s7582)

Hey friends if you have a samsung galaxy s duos 2(gt-S7582). File these steps
Things required
*Lineage os 14.1
*Samsung s duos 2(gt-s7582)(with twrp recovery in it)
*And most important brain??
1).first download file from bottom link
2) place in your SD card
3) boot into custom recovery (TWRP Is recommended).to go to recovery switch of your phone and after complete switching off of phone press home button power key and volume+ simultaneously
4)first backup if needed
5).noww select wipe then wipe data and swipe to erase everything
Now,back and then select advance ad choose the top five to erase and swipe to erase
6).now select install and choose the lineage 14.1 file and flash the file by swiping after installation press back and reboot system now
Hope this easy guide will help you
Don't blame me if your device stucksss so do it at your own risk??:fingers-crossed:
Link for rom- https:// www.androidfilehost.com/?fid=529152257862707633
Hahaha ? ?
Bro you are guiding for installation 13.1
But check what you said in point no 6
Check before copy paste
Give space in rom http link
And its very old build link add lineage 13.1 daily build link
Sent from my GT-S7582 using Tapatalk
???
I'm stunning after read this guide.
Hit thanks if helped guys

Categories

Resources