First, i want to say thanks to:
Fserve, Hephappy, PaoloM70, Roqu3, doixanh : For every things. All credits give to you guy, specially is Fserve, Thank you Gerson !
af974, YZ: Thanks for being good Moderators for XDA Forum
Cyanogenmod Team, Code Aurora Forum: Special Thanks for sharing their kernel source with a lot of patches! .
Tasssadar: For many advices .
DJNoxD: Big Thank for helping me and to fix errors
alezardstar, Aspee, RockR172, Andy572: Big thanks for helping me a lot
Der_Caveman, Mik_os, Franco Francisco, selphien and.... sorry i can't remember all people, Thanks for sharing and advising!
All XDA "GOOD" Members .
Click to expand...
Click to collapse
Bassiclly Features:
Based on "gingerbread_rel" branch from Code Aurora Forum, merged into CM7 official kernel source. Thanks to Hephappy for doing this .
Backported stuffs from 3.0 kernel to make this kernel run on ICS ROM - All Credits to LGICS Team.
Updated kernel version from 2.6.35.10 to 2.6.35.14 with Power Management patches for better battery life.
Completly Fair Scheduler with Autogroup feature.
Overclocking support. CPU Frequencies that added: from 652Mhz - 806Mhz.
- Tip: Most of P500 can overclock to 729Mhz, becareful with higher frequencies.
Implemented SmartassV2 Governor with optimizations. Use as default governor.
Implemented optimized touch screen driver with multi-touching hack and High CPU Usage bug workaround (CPU Usage goes high when you touch the screen).
- Thanks to Der_Caveman for rewriting a better touch screen driver, waleedq and sippolo for implementing Axis Inversion hack, fserve for High CPU Usage bug fixes.
Camera Flickering fix
Tons of patches/tweaks from CAF, Cyanogenmod, me, many other people... All credits to them!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Bugs:
Enabling GPS will bring "GPS wakelock". This will prevent your phone from going to deep sleep
Fix: Reboot your phone after enable GPS.
Random Rebooting... Nothing to say!
Click to expand...
Click to collapse
Reporting bugs:
Provide logcat when report bugs!
Click to expand...
Click to collapse
How to install:
Install the Kernel:
Reboot to Recovery.
Backup all thing FIRST!
Choose the caf-p500-xxxxxxxx-xxxx.zip (xxxxxxxx-xxxx is the kernel version)
Done it right? Reboot the system and Enjoy.
Click to expand...
Click to collapse
Tricks/Tips for getting better battery life:
Use the default governor - smartassv2! Highly Recommend!
Don't use CPU Profiles, SmartassV2 already has that.
Don't over clock your phone to higher than 729Mhz.
Click to expand...
Click to collapse
Kernel Download:
Please look into the 3rd post
Click to expand...
Click to collapse
Source:
Kernel Source Link (for ics only):https://github.com/thachtunganh/caf-kernel
Click to expand...
Click to collapse
Changelog
Changelog:
02/12/2012:
- Get up-to-date with Genet ICS kernel:
Remove obsolete audio pmem & increase PMEM_ADSP size.
Upgrade frame buffer to 3.0 kernel
Backport adsp_video_verify from .38 kernel
Update ashmem to msm-3.4
Full changelog: https://github.com/thachtunganh/caf-kernel/compare/b9810925f6...37cae19423
18/11/2012:
- Enable UID_STAT.
AngryWolf80 said:
Is it possible to enable uid_stat in this kernel?
This stuff activates per application traffic counter. Very useful thing with expensive mobile internet...
Click to expand...
Click to collapse
. Well, thank you for the tip
- Apply some PM patches, hope those patches can improve battery life
- Use XZ compression to compress kernel image.
- Please notice this version is for testing!
09/10/2012:
- Compiled with lastest Android NDK (r8b - new 4.6.3 GCC for ICS and Jelly Bean). And now Wifi module size is reduced from about 3MB to ~400KB .
- TUN/TAP module now is built in kernel image . Well, get more free space on ICS and Jelly Bean is awesome
- Update to Kernel release 2.6.35.14. :victory: (But i haven't apply some Power Management (PM) patches yet).
- Add Snappy compression support to zram. (this patch is from Zeev Tarantov . With Snappy, Zram uses less CPU time and is thus more useful, thanks to him!)
- Patches from Rashed97 - Who brought Unofficial CM10 Build for our device :laugh:
Fix mdp4_overlay for MDPI devices.
Hack for CRT animations fix.
- disable GENTLE_FAIR_SLEEPERS Sleeper Fairness in CFS. (this patch is from securecrt - Who Developed HWA kernel for ICS. Disabling Gentle Fair Sleepers could improve UI responsiveness. Thanks to him, too !)
- Restored a missed patch, AND USB MASS STORAGE PROBLEM ON ICS ROM IS FIXED WITH THIS PATCH (this patch is from Hephappy. Thanks to him!)
20/08/2012: From alezardstar, post #1048 . Big thank to him!
- smartassv2: some optimization for the governor.
- Use original CPU Frequencies. - No More Undervolted CPU Frequencies!
- Compiled with lastest Android NDK (r8b - new 4.6.3 GCC for ICS and Jelly Bean).
20/07/2012:
- Disabled Vsync for scrolling smoothness.
- Various tweaks from me. (Undervolted CPU frequencies (Undervolt 1 level): 122, 245, 320, 480, 600 Mhz. Increase Vibration level (from 115 to 120)).
- p500: Fix proximity sensor (thanks cyrix.vs) (took from hephappy, thanks to cyrix.vs).
- qdsp5: Incall recording pcm driver (took from hephappy).
- Tune dirty_background_ratio and vm_dirty_ratio (nobodyAtall AKA nAa from Xperia X8, X10 Mini, X10 Mini Pro Mobile Phone developement)
- Revert "Backport memory manager (mm) from ics_chocolate" module_alloc fails when wireless module activated in AP mode (hephappy).
- Revert "bcm4325: disable wakeup irq when device sleeps". (me)
- cpufreq: smartass2: change DEFAULT_RAMP_UP_STEP. (me)
02/07/2012:
- Implement optimized touch screen driver by Der_Caveman (Big thank to Tasssadar).
- sched_fair tweaks for improving performance. (IHO from OV).
- bcm4325: Force powersave mode, disable wakeup irq when device sleeps (IHO from OV, Mik_os).
- add the Stochastic Fair Blue (SFB) network scheduler. (LorDClockaN).
- fix rpcrouter misspelling (css771).
- usb: gadget: Remove unsupported mtp & ptp functions (hephappy).
- Disabled Hardware Keyboard support.
28/06/2012:
- Fix Data Usage - Set mobile data limit funtion for ICS. (lupohirp)
- Fix battery stat for ICS. (lupohirp).
- Enable Zcache in kernel. (me)
- Some bluetooth patches (Peter Hurley, jhovold).
- ext4: check for zero length extent (tytso)
25/06/2012:
- Fix USB Mass Storage for ICS. (hephappy).
- Bluesleep: Fix Wakeup (Tasssadar).
- Split out 2 part: Kernel (Normal Users) and Extra Modules (Extra For VPN, Tethering Users).
17/06/2012:
- Updated KGSL drivers (mikegapinski).
- Added frontswap, zCache, Cleancache; updated zRam. (lupohirp).
- Added Genlock (mikegapinski).
- Updated vidc/camera headers for compatibility (mikegapinski).
- Backport Memory Manager (mm) from Code Aurora Forum kernel, ics_chocolate branch (hephappy).
- Backport binder from 3.0rc6 kernel (Drew Walton)
- msm_fb : Add support for Yamato format (our adreno200 gpu) (lupohirp).
- Updated VFP code (lupohirp).
- Update network interface (adfad6666).
- cpufreq: backport cpufreq code from 3.0rc6 kernel (me).
- USB: f_mass_storage: Disable write cache support (Chiranjeevi Velempati).
- Many sched, autogroup patches (Mike Galbraith)
Click to expand...
Click to collapse
Download Section:
CAF Kernel (For ICS ONLY):
Kernel:
ALL VERSION include the lastest one: http://www.mediafire.com/caf-p500-kernel
Click to expand...
Click to collapse
Old Kernel LIKE ta-gb, thunderVN (For Gingerbread ONLY)
http://www.mediafire.com/?22y45z15xr2jv
Click to expand...
Click to collapse
FINALLY!! Was waiting for this!
To the testers please give the feedbacks
Sent from my LG-P500 using XDA App
I've been waitin' for like 5hrs??
Dowloadin'..
Sent from my LG-P500 using Tapatalk
Waiting for it.....FINALLY it's here thanx.
Thach!!!
Have you undervolted higher frequencies or just till 748?? 0_o
RockR172 said:
Have you undervolted higher frequencies or just till 748?? 0_o
Click to expand...
Click to collapse
No, description says undervolted low frq from 122-480
Shalu said:
No, description says undervolted low frq from 122-480
Click to expand...
Click to collapse
His previous version had 748 undervolted... m running it right now @748 without any random reboots which my phone used to get earlier @ that frequency...
Wait, il flash it n test...
Hey Thach, got a small problem camera exposure not working in cm nightlies#14 where It works fine on stock gb!
Shalu said:
Hey Thach, got a small problem camera exposure not working in cm nightlies#14 where It works fine on stock gb!
Click to expand...
Click to collapse
Camera Exposure , i don't know what is it? even i heard about it in Adfad6666 CM7 ROM
Rom Nightly Exposure in camera not working....no bug kernel
thachtunganh said:
Camera Exposure , i don't know what is it? even i heard about it in Adfad6666 CM7 ROM
Click to expand...
Click to collapse
It's also not working with Stock Cm7 kernel may be it's the problem in rom so chill
okay confirmed problem is in ROM
is it a .35 kernal or .32??
gurpreet9080 said:
is it a .35 kernal or .32??
Click to expand...
Click to collapse
It's a .35 kernel..
Oppss mistakenly pressed thankss,
Sent from my LG-P500 using Tapatalk
RockR172 said:
Have you undervolted higher frequencies or just till 748?? 0_o
Click to expand...
Click to collapse
Hey.. can u tell me what undervolting exactly does??
Sent from my LG-P500 using xda premium
fundoozzz said:
Hey.. can u tell me what undervolting exactly does??
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Less power on device, better battery.
But lower performance I think.
And why differs this kernel from Franco, like the ICS kernel? I think we already got enough kernels
Greets!
Shalu said:
It's also not working with Stock Cm7 kernel may be it's the problem in rom so chill
okay confirmed problem is in ROM
Click to expand...
Click to collapse
Oh, you mean the camera exposure , it's the camera flicker right?
If it right , it is the OC method , i use SoC OC method from cyangogenmod source.
The flicker fixed long time ago, i will fix it when i release the ICS kernel
fundoozzz said:
Hey.. can u tell me what undervolting exactly does??
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Undervolt will under the voltage of CPU Frequencies , it'll give you bettery battery life and stablity. And about the undervolt 748Mhz freq , i didn't do that.... I didn't test to undervolt 600Mhz and higher frequencies... doixanh (i took the undervolt frequencies from him) told me that it will crash when i undervolt 600Mhz and higher frequencies
Undervolt just decrease stability and only increase battery life by a bit.
Related
********* OFFICIAL FOR USE ONLY ON GINGERBREAD ***************
Special thanks to PaoloM70.
Personal Thanks to Andy, Mik_os, Franciscofranco, Ciaox, Noejn and all other devs.
AmonRA to flash it with the need to disable the verification of signatures.
Overclocking
Smartass
Smoothass
Cifs
Supports EXT4
+upstream to 2.6.35.13
+oc, interactive, smartass, smoothass, cifs, ext4
+governor added SavagedZen
+autogroup scheduler (the patch of 200 lines)
+ smoothass smartass with a capped rate (standby) to set minimum
V3 Kernel -Old kernel:
ADB Bugfix for device
Reconfigured various kernel parameters (For better power management, CPU profiles)
-Added for the inversion axes Sippola in the new touch screen driver.
-Simple-inserted I / O scheduler (sio)
-Included various other patches 5-6
-Removed references-debug (smaller kernels)
-Small fix to reduce the impact on the CPU more pressure on the display (you can check with Neocore first ... the difference came in 8-well 9fps now settles down to 2-3fps)
******Updated 25 July*********
Magazine-routine to increase the stability and overclocking performance, cameraflick is absent up to 729mhz
Touch-fix which decreases the occupation of the CPU when you press your finger on the display (should no longer have the lag that had the first version of V4 (I hope))
Magazines-and reinsert all the previous patches (66 patches in total)
Inserted by the kernel-2.6.36 backport of block, and mtd workque
Backport-inserted by the kernel 3.0rc6 and cpufreq of cpuidle
http://www.mediafire.com/?g8r37pzsr3ig21j
+same kernel but without the fix for employment cpu (maybe better in the scroll lag if you have one) **No touch fix kernel***
http://www.mediafire.com/?bed0ht9kcz0071c
******Updated 08 Aug*********
Touch V6 2.6.35.14
V5-like, but updated to version 2.6.35.14
-Added 2.6.36 kernel backported from the i2c
-Support Module tun.ko
-Vsync enabled
http://www.mediafire.com/?otpne0w1v8bhnp8
If you want to try the version NoTouch kernel
http://www.mediafire.com/?4wuiscjcu5xal58
After flashing, wipe cache and davlik.
If you have a2sd then run the following in terminal:
su
a2sd cachesd
The phone will reboot automatically.
Download Ringing with No fade :Now supports Gingerbread 2.3.3 :
http://www.mediafire.com/?1xqcc0jppl2w9ic
Flash and enjoy
To know more the original idea, please visit the thread here :
Special Thanks to Januka for the idea.
For devs :
I/Paolo doesn't have a repository, So its uploaded here :
Kernel Ginger Source
http://d-h.st/jvn
u only need to change one line in Makefile
at line 193 change from
Code:
CROSS_COMPILE ?= /home/paolo/x-tools/arm-spica-linux-uclibcgnueabi/bin/arm-spica-linux-uclibcgnueabi- #CROSS_COMPILE ?= arm-eabi-
to
Code:
#CROSS_COMPILE ?= /home/paolo/x-tools/arm-spica-linux-uclibcgnueabi/bin/arm-spica-linux-uclibcgnueabi- CROSS_COMPILE ?= arm-eabi-
Yes, I know I should use search, but please, can anyone explain to me how do smartass and smoothass work in comparison to, for example, conservative and ondemand?
And massive thanks to you mansirawat!
If you already know that you should use the search function, maybe you don't know HOW to use it...
Here's a "tutorial": http://lmgtfy.com/?q=android+governors
Otherwise, you're just plain lazy... which one is it?
Ciaox should see this thread , he is waiting for GB OC Kernel
P.S : Thank you for the Kernel
Otherwise, you prefer wasting perfectly good post space in order to lecture me. Just like half the members of XDA. And the fact that you supposedly come from Romania as well just shows...nah, why bring that up here, all foreigners know it already.
Great! Awesome! Pure awesome!
Thanks a lot!
Stock rooted GB with this kernel (652/320)-> 1152 in quadrant. I don't care too much about those points, but my phone is smoother.
Working fine with void forever...yeah its smooth ...got 2020 in quadrant at 806 MHz
Sent from my LG-P500 using XDA App
do i have to flash a new baseband before flashing this on any custom rom? thanks
Flashed it,let's see!
Thanks!
Best!
Great!
Awesome!
Pure awesome!
mansirawat said:
********* OFFICIAL FOR USE ONLY ON GINGERBREAD ***************
Special thanks to PaoloM70.
Overclocking
Smartass
Smoothass
Cifs
Doesn't support EXT4
Click to expand...
Click to collapse
Hey mansi hows the performance??? If its good then it will be included in my new ROM.
CWM can also be used to flash this zip. Tested(CWM 3.1.0.0) and worked.
sajjan said:
Working fine with void forever...yeah its smooth ...got 2020 in quadrant at 806 MHz
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
Why would you use this on a custom rom? We have Francisco's kernels for that.
devlin2427 said:
Why would you use this on a custom rom? We have Francisco's kernels for that.
Click to expand...
Click to collapse
its because krant,andy,mik's kernel are made of CM7 sources LG's are diff.
If you flash franco's kernel it will mk ur phone choppy. but you can try. if francos doesn't work you can flash this.....
Well I tried it out of curiousity ....and if not better it's definitely at par.....I still have to check battery life....
Sent from my LG-P500 using XDA App
cyber_avijit said:
its because krant,andy,mik's kernel are made of CM7 sources LG's are diff.
If you flash franco's kernel it will mk ur phone choppy. but you can try. if francos doesn't work you can flash this.....
Click to expand...
Click to collapse
does this kernel require a new baseband?thanks
roi14 said:
does this kernel require a new baseband?thanks
Click to expand...
Click to collapse
Yes, of course.
cyber_avijit said:
its because krant,andy,mik's kernel are made of CM7 sources LG's are diff.
If you flash franco's kernel it will mk ur phone choppy. but you can try. if francos doesn't work you can flash this.....
Click to expand...
Click to collapse
I'm afraid you didn't understand my question. I was asking why would he flash this kernel instead of Francisco's on void#forever.
devlin2427 said:
I'm afraid you didn't understand my question. I was asking why would he flash this kernel instead of Francisco's on void#forever.
Click to expand...
Click to collapse
ya you can use franco's kernel on any custom ROM other then those which are built from official 2.3.3
doktornotor said:
Yes, of course.
Click to expand...
Click to collapse
No. kernels have nothing to do with baseband. I flashed on v20g and its improved performance and another guy flashed on void forever and it improved performance.
PYD-X ExClusiVe KerneL!
Features:
-Based on HTC kernel from 3.33 (thanks to SebastianFM for the very clean kernel base - REBASED on CM source from 4.x versions)
-Included mpdecision/thermald binaries property of SebastianFM, huge, big, biggest credit to him!
-Lots improvements to performances!
-Addedd many i/o shedulers (cfq,bfq,deadline,sio,vr,noop)
-Tweaked these shedulers
-Improved CPU configuration
-3D GPU OC!
-Disabled Fsync
-Lots of modules so improved boot up time
-Improved Sched_fairs
-OTG Support - Addedd OTG Helper as app to Mount FAT32/NTFS usb drives
-Addedd Sweep2wake (as requested by users ) --- Huge thanks to GhostXSeries!!
-Custom Board File with support to Samsung S5K3H2YX Camera (Amaze 4G camera)
-New Bluetooth drivers to give support to HCI Apps (Sixaxis, wiimote, etc...)
-Addedd XZ compression support for zImage
-Improved VM ratios and ZRam (150mb actually)
-Paging moved to ZRam
-No Performance Lock!
-Tweaked Deadile and other shedulers
-Preconfigured for best balance between Performances and Battery Life!!!
-More but i don't remember >.<
Click to expand...
Click to collapse
BUGTRACKER:
-After the use of an HCI interface (Sixaxis) the WiFi stops working, needs reboot
-S5K3H2YX Camera needs other developments... - Support Complete! Kernel needs rom-side support (correct libs,etc.)
RED=High Priority!
ORANGE=Medium
GREEN=Low
Click to expand...
Click to collapse
BETA-TESTERS:
-Elemental_fire (amaze camera tester)
-GhostXSeries
-axetilen
-Super-Android
-ganeshp
-ziaulh.ch
Downloads:
***If you have problems with kernel, probably they are caused by a script included in the aroma version. Before criticize me and before bug report, clean init.d folder and try my zip with kernel only, and if it solve your problems report me please.
--I suggest to use KERNEL Tuner App to control the kernel (CPU/GPU/Vsync/Cores): HERE // HOW TO USE IT GUIDE
-------------------------------------
° Test Version 4.1.9 = Dev-Host
---Huge changes
° Beta Version 3.8.1 = Dev-Host
---I haven't much time. So i'm updating with the latest compiled beta build, the one i'm using in daily. Enjoy.
° Stable Version 3.1 = Dev-Host
**Some users have wrong flashes with ViperS rom. Follow this guide for a fix = HERE
---Code Corrections and fixes
---CIFS module is now included in the kernel
---Adjusted GPU configuration
---Corrections to the installation ZIP, more compatibility now
---Are u a benchmark fan? Look at this post: HERE // AND HERE
° Stable Version 3 = Dev-Host
---Code Fixes
---CPU Control (clocks, screen off clocks, etc...)
---Added CMD Line Interface for clock controls
---Added GPU CMD Line as optional interface
---GPU Control (2D up to 266mhz / 3D up to 320mhz)
---Standard: 200mhz 2D Core / 300mhz 3D Core
---Standard: 1566mhz MAX Cpu / 384mhz MIN / 486mhz ScreenOff MAX
---Adjusted General Kernel Configuration
---LED timer already disabled
---2WCR Support
---Updated ZRam script
---Zip now clean all the files from other kernels that can cause problems
° Stable Version 2 = Dev-Host
---ReChanged Bluetooth drivers, HCI fixed, Sixaxis totally working!!!
---Changes to GPU configuration
---Changes to Board Configuration
---More works on Camera, more code for Amaze 4g camera support on pyramid board
---MOOORE PERFORMANCES! Yes, i love a smooth ui, specially htc sense
° Stable Version 1 = Dev-Host
---Initial Release
**How to control S2W? read HERE
**Aroma installer version with settings in the second post!
AIO Kernel MOD by axetilen & iba21 (AROMA)
NON-BOOTLOOP KERNEL VERSION + Powerful Kernel Reset:
PYD-X Kernel v4.1.9 for ViperS, Sense-o-Maniac and Elegancia - Sense 4 (all versions)
Download
PYD-X Kernel v4.1.9 for Elegancia Blitz + Pegasus + ARHD (someone tested)
Download
Requirements:
- PYD-X kernel v3.8.1, v4.1.9 or higher
- SebastianFM kernel v1.5.0, 1.5.1 or v1.5.2
- Grogg kernel is also supported but not fully functional -> Run MOD for PYD-X kernel
- ROM which supports init.d folder
- S-off and rooted phone
- The latest 4EXT Touch Recovery
- AOSP/AOKP/CM10 are NOT supported
FOR MORE INFORMATION ABOUT FEATURES AND SOME NOTES, PLEASE GO TO MY THREAD
http://forum.xda-developers.com/showthread.php?t=1866127
@Credit:
- Special thanks: iba21: please give credit to him if you think this mod is useful. Click here to see his MOD for Bricked kernel
- SebastianFM: DEV of SebastianFM Kernel
- XxXPachaXxX: DEV of PYD-X Kernel
- Ghost: for helping us
DOWNLOAD:
v1.2.2
Dropbox
Mirror - see my thread
first^^
Is it possible to enable Hard Swap with this kernel? I get a RIDICULOUS boost with hard swap opposed to ZRam. (installing now)
Github source?
Sent from my Sensation
Daiskei said:
Is it possible to enable Hard Swap with this kernel? I get a RIDICULOUS boost with hard swap opposed to ZRam. (installing now)
Click to expand...
Click to collapse
Swap support of course
blahbl4hblah said:
Github source?
Sent from my Sensation
Click to expand...
Click to collapse
Uploading
XxXPachaXxX said:
Swap support of course
Uploading
Click to expand...
Click to collapse
Good to hear
Sent from my Sensation
Thanks, will try it soon
Hey ya, thx for the release of a new kernel development. Am I right and this is kind of a modified Sebastians kernel?
And do we need to flash the kernel reset init.qcomm script first?
XxXPachaXxX said:
Swap support of course
Uploading
Click to expand...
Click to collapse
thanks friend .. Now I try it immediately
Good work. :good:
its working good ..but i dint see the init.d script for vsync disabling ..did you added it some where ?
EDIT: my bad ..some how assumed Fsync as Vsync silly me :silly:
Thanks for new kernel is 2way call recording supported in this kernel?
Prinz069 said:
Hey ya, thx for the release of a new kernel development. Am I right and this is kind of a modified Sebastians kernel?
And do we need to flash the kernel reset init.qcomm script first?
Click to expand...
Click to collapse
Don't need it, i included the init script
onaj said:
Thanks for new kernel is 2way call recording supported in this kernel?
Click to expand...
Click to collapse
No, if u need i can add it
Possible to use it with CM10 ?
Sent from my Powerful HTC
Sensation with an exellent JellyBean Rom using XDA-Premium
Taker18 said:
Possible to use it with CM10 ?
Sent from my Powerful HTC
Sensation with an exellent JellyBean Rom using XDA-Premium
Click to expand...
Click to collapse
nope ..its sense based kernel
Do we have some benchmarks yet?
Thanks a lot pacha ...and Thanks to the One who added s2w ( think it was ghostxseries) ... Gonna flash now))
...sent from my sensation xe
Hi Pacha,
I used your previous tweak pack before and it was marvelous. I haven't flashed this one yet but I am sure it has the same quality.
Keep up the good work mate.
Cheers.
Thx for your kernel, just flashed it.
I'll have to work with or frist , but as i already can notice ,strings open much mfaster as before
Sent from my Sensation using xda premium
JellyX Kernel 2.6.32.60 // 10.04
If you want to report something head over here and make a "new Issue".
I followed this community now about one year and i wanted to give something back.
Since we managed it to boot a custom kernel, i started reading into stuff and trying to learn how to make the most out of it.
The result so far is my little kernel, it's mainly based on Quarx's one but has some additional features:
Added more Governors (Smoothass, Brazilianwax, InteractiveX, SavagedZen, Scary, Superbad, Lagfree, MinMax)
Added more I/O-Schedulers (Anticipatory, Deadline, V(R), BFQ v2, ZEN)
zCache Support
Cleancache Support
XZ Kernel Compression
zRam with snappy compression
Undervolted: 300/24, 600/40, 800/46, 1000/54
Optional: Choose between CFS and BFS CPU Scheduler
CFS Autogrouping enabled
Tiny RCU
Updated CRC32, jHash
FSync Control by Ezekeel (Read more about this here!)
Proportional Rate Reduction for TCP
New and shiny Wifi drivers by Quarx
Dynamic page-writeback Control v1 by Blechdose
SLUB memory allocator (instead of SLAB)
Some more little changes
Click to expand...
Click to collapse
Its mainly designed for Quarx's CM10-Rom, however if you tried another rom you can tell me the name and i add it to the compatibility list
You can find the downloads over here. There is one for CFS and one for BFS.
Installation:
Download and put it on your SD
Reboot into Recovery
Make a Backup
Wipe Caches
Recommendation: Wipe Data (optional)
Install my Kernel Flash at your own risk!
Click to expand...
Click to collapse
By the way, if you have useful patches or commits, send them to me, don't be shy Or provide me the source for a specific feature.
Click to expand...
Click to collapse
Something to read:
Governors & Schedulers.
BFS Scheduler
How to - Build your own Kernel (by Kayant)
So far confirmed to be working with:
Quarx Rom 4.1.x (18.11, 28.11, 5.12, 22.12, 31.12, 10.01, 17.02, 24.03, 26.03)
SB 3.0, 3.1
PACMAN 18.0.0
CNA 3.6.6
Click to expand...
Click to collapse
About the 3.0.x Kernel:
My 3.0 kernel shares the same advantages and disadvantages as Quarx one. However i started working on it in a very early stage.
So to keep it short, whats already working:
zCache
CleanCache
UKSM (instead of KSM)
FSync-Control
IO-Schedulers (BFQ, ZEN)
XZ Compression
Latest Linaro
"Ram optimizations"
I am working to get phone working (to help Quarx somehow..), but since many things changed related to this, this will be rather hard than simple... Help appreciated
Click to expand...
Click to collapse
Troubleshooting;
If you encounter any problems, please post full information about your system (governers, overclocked, zRam enabled, cfs or bfs version, etc...) and if the same problem exists with Quarx Kernel or with a earlier kernel.
Furthermore run "dmesg" in terminal and post it or send me a pm
And don't worry if it's not working for you, try to play around with some settings.
All in all, if you want a better kernel, try to be much precisely as possible and what steps you did. It helps lot more, if you say more rather than less.
Thanks:
czechop, Quarx, Epsylon3, Kayant, franciscofranco, Skrilax_CZ, kabaldan, Ezekeel, the CM-Team and everyone else i forgot
Click to expand...
Click to collapse
Changelog:
10.04:
Added dynamic page-writeback control (read here how it works)
Switched to SLUB
Updated interactive governor
Merged with Quarx commits (Wifi should work, you can flash this even on a older ROM version / cpcap-irq wakelock fix / usb wakelock fix)
some small changes
03.04:
Updated modules in order to let the kernel work independent of ROM version
Because of module-update some random bugs got fixed (like cpu spy)
Wifi should be on the same stage as with a .9 Kernel
Read more about this here, should be also work with CM10.1 (not tested)
22.03 && 24.03:
You may find two builds, 22.03 and 24.03 read more about those here!
Updated the lowmemorykiller
Added genlock-support
New Wifi Drivers
Reverted some stuff from 14.03 and updated interactive to be a little bit more battery friendly
14.03:
Added OMAP3 Hardware random number generator
Added frandom module
Added io_is_busy parameter to interactive (read more here)
Added pre-sweep2wake read here more!!!
Enabled dynamic fsync by default
Fixed a problem in wakelocks (by YetAnotherForumUser)
Fixed negative values in /proc/wakelocks (by YetAnotherForumUser)
Fixed display voltage values (back to stock for stability)
Fixed many unused variables
Fixed the blackscreen bug*
Set -O3 Flag
changed many other things for a smoother experience, read it here
*hopefully...
21.01:
Added Proportional Rate Reduction for TCP (Read more)
Added Dynamic FSync (disabled by default)
Added CFS Autogroup (backport from 3.0) (Read more!)
Updated BFQ Scheduler to v2
Updated pmem and ashmem
Updated memblock
Updated ext4 driver
Updated ext3 driver
Updated oom kill
Updated cache handling for our ARM v7
Optimized RCU Tiny
Disabled: AES and SHA1 routines, some slab commits
Code cleanups and optimizations and probably more
Merged with Quarx commits
Here is a nice summary about this update
30.12: Happy New Years-Edition
Added FSync Control by Ezekeel
Added ability to load ext2/ext3 filesystems with ext4-drivers
Added optimized AES and SHA1 routines
Updated CRC32-Lib
Updated vmscan
Updated SLAB
Updated jHash
Updated writeback
Fixed some unstable things
Fixed some kmemleaks
Fixed broken ram_console
Renamed lmb to memblock (for future use)
Tweaked; BFS, CFS and ARM
Merged with Quarx last commits
And some small things i forgot
Read more about this update here!
22.12:
Introduced the Block IO Controller v1
Backported therefore CFQ-Scheulder from 2.6.33
Enabled the AES HW accelerator driver
Improved CleanCache handling
Merged with Quarx (disabled trace, more ram, disabled some drivers, fixed a reboot issue)
12.12:
Added MinMax Governor
Tweaked Brazilianwax, Lagfree, Scary, Superbad (should have better battery life, need feedback..)
Introduced some parts of Googles TCP Fast Open (needs much more...)
Backported & Updated CRC32
Updated jHash to v3
Some AES HW accelerator driver tests
Some other minor things
08.12:
Fixed compatibility with Quarx Rom (05.12)
Merged Quarx commits (enabling trace)
Some optimizations for CFS and Tiny RCU
Some USB OTG tests
Some other minor things
05.12:
Added Lagfree Governor
Added ZEN I/O Scheduler
Improved Tiny RCU
Improved BFS&CFS Scheduler
Backported zlib from 3.0
Backported vzalloc
Fixed reboots with zRam enabled
Notice: There is now one build for the BFS scheduler and one build for the CFS scheduler!
02.12:
Updated BFS to v318
Tweaked BFS
Tweaked lowmemorykiller
30.11:
Applied many patches for BFS (hopefully better performance now...)
Changed the voltages a bit
Introduced Tiny RCU
Some other minor tweaks
29.11:
Added BFS Scheduler (experimental)
More undervolting for display and camera
Changed VM_MAX_READAHEAD
Some more patches and fixes
Great work! will test asap!
great work. i'll test soon.
Thanks Blechd0se! You can create a custom kernel for cm9.1? Epsylon Kernel is good but the battery life is very low!
27-11 kernel working fine in SlimBean 3.0 from Kayant.
I repeat my thanks to you men. Working great on slim beam with scary governor. I'll test a little more, but it seems to have a very good life of battery. May be no recommended for games, because it work to lows frequencys almost all the time, but it scale so fast when CPU is needed. The others features enabled, are used by default or there's a way to enable them. Thanks so much...
The thanks button doesn't bite. Try it!
If there's something that I've never thought of seeing here on Defy Dev Forum, it was an thread about an custom kernel for it.
Keep up the good work, and if you need an guinea pig for testing, you can count on me! :good:
Great developers from Germany, Maniac and You..
Thanks for sharing
Arch Linux User ..
Guys! Morning to everybody!
Is it enough to install through cwm or have to install again the nightly and gapps?
Thx
defy green powered by jb
simple question ahead...
custom or costum?
Just one correction
Custom is spelled Custom and not Constum
I'll be trying it soon...
I don't want a tapatalk sig!
---------- Post added at 11:44 AM ---------- Previous post was at 11:44 AM ----------
hunyadia said:
Guys! Morning to everybody!
Is it enough to install through cwm or have to install again the nightly and gapps?
Thx
defy green powered by jb
Click to expand...
Click to collapse
No just the kernel
I don't want a tapatalk sig!
Blechd0se
Please help to wajk wiui jb rom support this kernel and janeindiran JIUI JB rom also
Then enable the swap and otg function
You Are rocking Man .
Could this kernel used in cm7
Sent from my MB525 using xda app-developers app
cfanmaoli said:
Could this kernel used in cm7
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
Nope
I don't want a tapatalk sig!
@Blechd0se
You should include info if your kernel format E to EXT4 and which kernel does it.
Less experienced users might be warned about E: can't mount problems. Which sometimes* are not fixed by CWM - Tools - Format.
* when you have CMW ver. 5.0.6 for example.
The kernel doesn't format anything The zip does mainly contain the kernel.
OTG is maybe something interesting...
Blechd0se said:
The kernel doesn't format anything The zip does mainly contain the kernel.
OTG is maybe something interesting...
Click to expand...
Click to collapse
for OTG look here http://forum.xda-developers.com/showthread.php?t=960633 some related info
Good work !!
Sent from my Nexus 4.
Great! Touch wake would be amazing too, or is it working already?!
Sent from my GT-I9000 using xda app-developers app
This kernel will run with Sense Rom`s ONLY (Aosp version in post 4)
[/CENTER]
Features:
ION Memory allocation
Overclocked and Udervolt.OC avilable up to 2.0Ghz (1Ghz by default)
Cpu governors : perfomance, smartass2, powersave, userspace, onedemand(by default), interactive, interactiveX, conservative, wheatley, lazy, lagfree.
I/O shedulers : row, cfq, sio, bfq, noop, deadline, vr(by default).
EXT file system support (2.3.4)
2 way call recording support.
Sweep2Wake,TapTap2Wake,2F2Wake support for atmel and synaptics touchscreens.Disabled by default (see 3rd post for more info).
Fast charge feature : use app from market (it is free) to enable it.
TPA sound with HTC beats support - you can use FauxSound from market to control it (app is not free).
And much more.....
Click to expand...
Click to collapse
Before posting bugs - attach kmsg or last_kmsg file.
DOWNLOADS
Current version T16.1
HD-ION-KERNEL-T16.1
Older:
T 15.5
HD-Kernel-T10_2wrec_s2w_fc_dvfs.zip
mirror
HD-Kernel-T7_2wrec_s2w_fc_dvfs.zip
mirror
HD-Kernel-T6_2wrec_s2w_fc_dvfs.zip
mirror
HD-Kernel-T5.1_2wrec_s2w_fc_dvfs.zip
HD-Kernel-T5_2wrec_s2w_fc_dvfs.zip
mirror
HD-Kernel-T4_2wrec_s2w_fc.zip
HD-Kernel-T3_2wrec_s2w_fc.zip
HD-Kernel-T2_2wrec_s2w_fc.zip
HD-Kernel-T1_2wrec_s2w_fc.zip
.........
Our GITHUB Kernel Sources:
Github-HD-Kernel-Sources
//////////////////////////////////////////с
ChangeLog
Code:
06.05.13
lkv 76
smartassv2 tweaks
Removed MSM V4L2 video overlay buffer size
input: touchscreen: fix typo: atmel
revert capacitive buttons coordinates for less precision:atmel
Powe Managment: wakelock fix
19.04.13
s2w for synaptics fixed (deep sleep problem)
18.04.13
Allow CPU-based alignment handling
cpufreq: interactive: sync with htc7x30-3.0
LKV updated to 73
Revert back to old MSM_FB_SIZE value
05.04.13
DVFS implementation , read [URL="http://www.google.ru/url?sa=t&rct=j&q=&esrc=s&source=web&cd=4&cad=rja&ved=0CEsQFjAD&url=http%3A%2F%2Fcseweb.ucsd.edu%2F~jlbradle%2Fdocuments%2Ffinal_report.pdf&ei=BXVeUcnPL4nOtQaGyoDYBQ&usg=AFQjCNGwhxF2640zZ3VUClmjv5ki7ZsIJQ&sig2=xQG80jcxhVarAMVAn4LQ1Q&bvm=bv.44770516,d.Yms"]this[/URL]
fix fauxsound from 4.1 version
29.03.13
default memory settings (to work hdr,panorama on fixed camera roms like svhd)
revert:proximity sensor patch
one more io sched added
configuration changed.
patch to latest (.71) linux kernel version
overall perfomance&stability improved
28.03.13
FauxSound support added
more memory for camera
proximity sensor fixed - no more proximity recalibrator app ! (test needed)
s2w for synaptics - 1 option - back to original s2w function. the old one is now 4 option.
25.03.13
linux kernel version updated to .70
charge fix
Adjust the 'conservative' and 'interactive' cpufreq governors
camera : frame buffer
one more power level for GPU clock
20.03.13
linux kernel version updated to .69 , some changes into configuration.
...................
18.03.13
--Initial release
Revert back to original s2w for synaptics for now (deep sleep not solved yet)
........
Additional Stuff, Info.
s2w:
How To.
You can use venom tweak to enable it, (there is only 3 choices : disable,enable,enable with no backlight) enable:s2w,enable with no backlight:TT2w.The 2f2w you can not use with tweaks,for this you need to change the value manually : in sys/android_touch you will find file called sweep2wake - edit it by root explorer.
the values are:
1 - S2W
2 -TT2W
3 - 2F2W
S2w is disabled by default,and if you enable it ,after you reboot your phone, the setting will be dropped.
There is a script (in attach,modify it as you want) push it into system\etc\init.d directory,fix permission (you can use root explorer for this)...profit.
This kernel will run with JB AOSP Rom`s ONLY
this kernel merged with kang bang,hybrid,Hd kernel
Features:
Hd kernel&kang bang&hybrid
Blah blah blah
Blah blah blah....
Click to expand...
Click to collapse
Before posting bugs - attach kmsg or last_kmsg file.
DOWNLOADS
Current version (T1)
HD-Aosp-Kernel-T1
Older:
.........
//////////////////////////////////////////
Thank you! Will try, i hope it has the same battery life and performance as ucxl kernel.
Hello,
first, great work.
I have a synaptic touchscreen. s2w isn't really working. My DHD wakes up, if I only touch the search button. I'm on viperhd.
DonToben said:
Hello,
first, great work.
I have a synaptic touchscreen. s2w isn't really working. My DHD wakes up, if I only touch the search button. I'm on viperhd.
Click to expand...
Click to collapse
I know that, it is known problem.But...when your phone go into "deep sleep", you need sweep 2 wake like in original s2w.
thachtunganh not join your team? I thought he will join your team
kernel base is different then ask,so if he want to join us ,he need to change kernel base.
Great Job
Good To see your Work
New kernel, new life!
I will give it a try, thanks for your efforts.
Re: [KERNEL][3.0.X]18.03.13 HD-Kernel T1 (sense kernel)
tweakos said:
kernel base is different then ask,so if he want to join us ,he need to change kernel base.
Click to expand...
Click to collapse
I would like to...
Sent from my HTC Desire HD using xda app-developers app
Awesome work guys, this kernel works like a charm and s2w on synaptic driver is just OP ^^
thachtunganh said:
I would like to...
Sent from my HTC Desire HD using xda app-developers app
Click to expand...
Click to collapse
welcome , no problem
tweakos said:
welcome , no problem
Click to expand...
Click to collapse
You can add me to Collaborators in the kernel repo.
So i can sync it down and commit my changes
I am answered in your thread.
Will try it ASAP
Re: [KERNEL][3.0.X]18.03.13 HD-Kernel T1 (sense kernel)
Installation aborted error. Downloaded two times
Re: [KERNEL][3.0.X]18.03.13 HD-Kernel T1 (sense kernel)
Wooo a team of awesome devs working on a sense kernel!
Sent from my HTC Desire HD using xda app-developers app
salman45 said:
Installation aborted error. Downloaded two times
Click to expand...
Click to collapse
Try downloading with another device.
Optimus Kernel
I present to you my own kernel which has been built with many optimizations and tweaks. This kernel will work on marshmallow roms only.The main aim is to provide a stable kernel with optimizations.
I hope you all will like it
A new simple version (lollipop version) is available at post #2. Do check it out!
Note: R47 or later will work perfectly only on MarshMallow. Lollipop support was ended with R46.
Custom Features:
- Updated to latest cm-13.0 Sources
- Compiled With Custom UBER 5.3.1 Toolchain
- Compiled With -O3 & Graphite Flags
- Additional many optimization flags
- Compiled With Cortex A7 Tweaks
- ARM v7 Optimizations
- MSM_hotplug driver flavored by neobuddy
- DoubleTap2Wake/Sweep2Wake
- GPU underclock/overclock(Min:100 MHz & Max:533 MHz)
- Add dev/frandom
- Added Support for Kernel Neon Mode
- Enabled Pipe Flag
- Adreno Idler Algorithm
- Add State notifier driver
- Add Impulse governor(default)
- Add BioShock/DanceDance Govs
- Added SmartMax/LionHeart Govs
- LCD Kcal Control by Savoca
- Faux's Sound Control
- Optimized ARM RWSEM Algorithm
- Optimized Square Root Algorithm
- LMK tweaks
- block: disable add_random
- Enable unaligned capability for ARM
- CpuFreq Optimizations
- Backported hotplug thread infrastructure
- Disabled Gentle Fair Sleepers
- Enabled Many TCP Congestions
- Added SIO,VR & ZEN IO Scheduler
- Sched & Mutex Tweaks
- Pushed Read Ahead value to 512
- Use your android device as USB Keyboard/Mouse
- Enabled FSync by default
- Optimized Slub
- VFP HardFloat
- Power Efficient WorkQueues
- Kexec patched (Multirom Compatible)
- Many more things (Check Github)
Disclaimer:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
Pls Read This before flashing:
You need ROM's default kernel before flashing this as this kernel makes use of AnyKernel 2 by @osm0sis. Make sure you have it otherwise clean flash the kernel with the rom to avoid any issues.(At least dirty flash rom+kernel) Credits to @attack11 for some part of install script.Read FAQ's and changelogs in 2nd post. THIS KERNEL COMES FINE TUNED OUT OF THE BOX.
DOWNLOADS:
AndroidFileHost
OptimusR46NEW(Final LP version)
Mirror: (Current as well as older versions available)
Mediafire
How to Flash:
1. Download the kernel and place it into your phone storage
2. Reboot into recovery
3. Install the kernel
4. (optional) Wipe Dalvik/ART Cache and Cache partitions
5. Reboot and enjoy!
PLS DON'T MIRROR THE LINKS
Recommended app:
Synapse or Kernel Adiutor
Flash UKM.zip from the below link: (credits to @apb_axel)
http://forum.xda-developers.com/android/software/zip-synapse-script-universal-kernel-t2736986
And then install synapse from play store.
I would like to say thanks to @faux123 @YoshiShaPow @fermasia @Alberto97 @TeamMex @Quasar @Mazda @FabioSan @Blechdose @neobuddy89 @RenderBroken @savoca @deadman96385 @pinkflozd @alin.p @Cl3Kener @Shivam Kuchhal and CYANOGENMOD TEAM
and MANY MORE...
XDA:DevDB Information
Optimus Kernel, Kernel for the Moto G
Contributors
Flashhhh, Thecrazyskull
Source Code: https://github.com/desaishivam26/Optimus_Reborn
Version Information
Status: Stable
Current Stable Version: R38
Stable Release Date: 2015-05-21
Created 2015-04-24
Last Updated 2015-07-14
OptimuSimple is the version that i have been using quite often now. It's not bloated with many features and works surprisingly well compared to original version. Some of it's features:
- Updated to v3.4.109
- Compiled with Linaro 4.9 Cortex A7 optimized toolchain
- Intelliplug 4.0 by faux
- Faux Sound Control
- Kcal Control by savoca
- Simple GPU Algorithm
Optimizations and governors are same as original version. It doesn't contain dt2w. So if u want dt2w flash original version from 1st post!
Download:
https://www.androidfilehost.com/?fid=24052804347833430
Looking for changelogs??
Here they are!!!
F.A.Q. - Read this before complaining!
1. My phone exploded, HELP!
A: I don't answer to problems without a log. The log file is in /proc/last_kmsg. Paste it on pastie.org and link it on your post. Logcats are useless for Kernel purposes, don't bother posting them.
2. This kernel works on Y or X rom?
A: Works on all CM12/12.1 and AOSP roms. Not for stock roms!!
3. OMG BATTERY SUCKZ, ITZ DEAD IN 45 MINUTES, HELP!
A: As you can imagine I don't build kernels to decrease battery life. All the battery life problems come from your apps, either Facebook, or Maps, or some Location Service being enabled etc etc. Check your damn wakelocks and fix them, the kernel is not responsible for them.
4. How do I flash this?
A: Read the OP, theres a reason why I added instructions on it.
5. What is a data loss? Did I just had one?
A: Data loss is simply having the connection cut for X periods of time, usually few seconds. Grey bars means the device is not connected to Google services for some weird reason, but you'll still have internet connection.
6. OP is arrogant, I'm gonna call the Internet Police?
A: Deal with it.
Many thanks to showp1984 for this info
What is msm_mpdecision?
100% kernel based multi core decision! (should cpu1/2/3 be online or not?)
This is a special version modded by neobuddy Plus the idle frequency and some load thresholds have been adjusted by me.
Some Configuration:
startdelay = time until mpdecision starts doing it's magic (20000)
delay = time between checks (130)
pause = if something else plugs in the cpu, fall asleep for 10000ms (10 secs)
scroff_single_core = if the screen is off, don't plug in cpu1/2/3. Additionally: Unplug all cpus except cpu0 when screen is turned off (1)
enabled = enable(1) or disable(0) mpdecision. This does not affect scroff_single_core!
min_cpus = min cpus to be online, cannot be < 1. Default: 1
max_cpus = max cpus to be online, cannot be > 4. (if you set it to 2 and min_cpus to 1 you will basically have a dualcore) Default: 4
idle_freq = a value against that will be checked if a core +/- is requested. (600 MHz)
mpdecision's input event boost, aka project butter
This will boost your min cpu speed if you touch the screen or press a button and gives you full control.
In those events the min cpu freq will be risen to a predefined value on every online cpu. This boosts overall reaction times and smoothness a lot. (works similar to the qcom mpdecision binary)
Good to see one more kernel
Sent From My XT1068{LP} Using TapatalK
Will try ASAP, thanks
Installed on my XT1032 16GB CM12 . Intellidemand/Noop and it runs great , very smooth scrolling tested with G+ in the Browser.
How about the camera performance? On other kernels, it would freeze after touching the shutter and requires a reboot.
Anyways, great job on making another kernel available for Lollipop
Thanks for the intelliplug and a bunch of governors
Sent from my falcon using XDA Premium 4 mobile app
hiu115 said:
How about the camera performance? On other kernels, it would freeze after touching the shutter and requires a reboot.
Anyways, great job on making another kernel available for Lollipop
Click to expand...
Click to collapse
Camera is working fine!
You can test it for yourself
Kai Disobey said:
Installed on my XT1032 16GB CM12 . Intellidemand/Noop and it runs great , very smooth scrolling tested with G+ in the Browser.
Click to expand...
Click to collapse
Glad to hear that!
srisurya95 said:
Thanks for the intelliplug and a bunch of governors
Sent from my falcon using XDA Premium 4 mobile app
Click to expand...
Click to collapse
U r welcome
Flashed this kernel on blisspop and its awesome!!!
ROM performs pretty good with kernel and intelliplug works like a charm
Thank you @Flashhhh hope u continue development
Sent from my falcon using XDA Premium 4 mobile app
Does it support XT1033 as well?
hiu115 said:
Does it support XT1033 as well?
Click to expand...
Click to collapse
Yes!
Working great man, but please fix the gpu governors, When switching to simple_ondemand then it reboots..
DeHuMaNiZeD said:
Working great man, but please fix the gpu governors, When switching to simple_ondemand then it reboots..
Click to expand...
Click to collapse
Thanks for reporting!
Will fix it
But the next update will take a little time!
Sry
Intellithermal plzzzz..
srisurya95 said:
Intellithermal plzzzz..
Click to expand...
Click to collapse
Intellithermal isn't entirely useful on the Moto G since it runs on low clock speeds anyway. So no heating problem.
srisurya95 said:
Flashed this kernel on blisspop and its awesome!!!
ROM performs pretty good with kernel and intelliplug works like a charm
Thank you @Flashhhh hope u continue development
Sent from my falcon using XDA Premium 4 mobile app
Click to expand...
Click to collapse
sorry what version of blisspop you have?
today's build?
deltafile said:
sorry what version of blisspop you have?
today's build?
Click to expand...
Click to collapse
4/02
Sent from my falcon using XDA Premium 4 mobile app
srisurya95 said:
4/02
Sent from my falcon using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ty im going to switch to it from candy rom