Database Info

[Q] Updating while rooted

I have seen a few posts in regards to people asking about updating from a rooted device but I never seen the answer I been looking for.
Example: I rooted my Motorola XOOM Tablet, Android 3.2 by following these instructions: http://forum.xda-developers.com/showthread.php?t=1170760
"[GUIDE][US WIFI & 3G] How To Root Your Xoom From 3.2 Stock [PC & Mac]" posted by jase33
IF say for example version 3.3 comes out.. IF I want to upgrade to version 3.3 from my rooted 3.2, Am I able to click upgrade when it announces it? While rooted and unlocked?
I am not using custom ROMS. I just followed those steps provided in the link above.
Do I have to restore to faculty settings, re-lock, then upgrade, then repeat the same process to root all over again? or can I just click upgrade.
Other posts started talking about having custom ROMs, and there wasn't a defendant answer that I saw that was reassuring to my question.
Thanks for your Help

So far ive not had little success updating using the built in update feature, when 3.2 came out I tried updating but it crapped out when booting, so I had to delete the user data, loosing all my apps in the process. But this is based only on the update from 3.1 to 3.2 both stock roms. P.s. i used the same instructions u did on an AU Xoom.
D

dayyanj said:
So far ive not had little success updating using the built in update feature, when 3.2 came out I tried updating but it crapped out when booting, so I had to delete the user data, loosing all my apps in the process. But this is based only on the update from 3.1 to 3.2 both stock roms. P.s. i used the same instructions u did on an AU Xoom.
D
Click to expand...
Click to collapse
If your Xoom is unlocked but also not rooted/completely stock, you can get OTA updates. If rooted, even stock rom/kernel, you don't get or can't install updates. But if rooted, never fear, our developers, including the Tiamat team have made the updates available to us super fast.
Anyway, you never need to re-lock unless you plan to return the Xoom under warranty, for repair or replacement.

no offense but it sounds like you don't know much bout this sort of stuff...you believe that you are not using custom rom but are not sure?? You need to read up and figure out the basics...if you are using custom rom..absolutely do not accept an over the air update. Read up on what you are doing unless you want a600 dollar paperweight

I am actually more than 100% sure I am not using a custom ROM..
I never downloaded any custom ROMs to be honest that’s how I know.
The only thing I wasn’t sure of at first was the ADB commands but when I was rooting for the first time. But after I read the tutorials it was as easy as riding a bike. As for the small Linux commands used in the shell, from the tutorial that I followed, seemed pretty super basic. I had been using Linux for 6 years, recompiling kernels etc so I don’t have any doubts...
I am not too worried about bricking anything… My question was only related to the OTA updates with the rooted stocked. That’s all.
Thank you everyone for your responses, they answered my question. And thanks for the concerned about my device.

How to update to Jelly Bean?

Before anybody says to use the search function, I've been looking through the general topics non-stop for one that applies to my situation, and either it slipped through the cracks (likely) or it doesn't exist (not likely).
Basically, my tablet is rooted and unlocked, and I'm on ICS; the first one that had face unlock in it. I'd really like to update my tab to JB, but I need to be pointed toward directions for updating a rooted and unlocked tab. But on top of that, I also need recent instructions, because I know that earlier attempts at getting this thing updated have resulted in lots of bricked tabs.
If anybody could tell me if it's possible to update my tablet to JB right now, I'd appreciate it, and if someone has figured out how to do it, can you please point me toward that thread? I'd really appreciate it.
-Tim

I'm in the same configuration, custom-ics-rom with twrp recovery on unlocked device.
I believe the first thing to do is enabling NVFLASH, that will make things safer also in the worst cases.
I did that and now hopefully I have an unbrickable device.
I'm a bit confused on how to go forward, I know that there are two versions of twrp, maybe I should install the JB version, booting inside it and then flash the downloaded JB update from ASUS site, or use the twrp for ICS for flashing and after that install the JB version ?
Anyone knows what is the correct option ?
Giuseppe
Tim 13 said:
Before anybody says to use the search function, I've been looking through the general topics non-stop for one that applies to my situation, and either it slipped through the cracks (likely) or it doesn't exist (not likely).
Basically, my tablet is rooted and unlocked, and I'm on ICS; the first one that had face unlock in it. I'd really like to update my tab to JB, but I need to be pointed toward directions for updating a rooted and unlocked tab. But on top of that, I also need recent instructions, because I know that earlier attempts at getting this thing updated have resulted in lots of bricked tabs.
If anybody could tell me if it's possible to update my tablet to JB right now, I'd appreciate it, and if someone has figured out how to do it, can you please point me toward that thread? I'd really appreciate it.
-Tim
Click to expand...
Click to collapse

Keep ICS, as JB will cause much trouble especially if you are rooted, trying to OC and is generally slowein my opinion

I prefer to try it anyway, tomorrow I will try flashing, after all if something will go wrong I should be able to recover with nvflash.
[
QUOTE=grimsonfart;32974661]Keep ICS, as JB will cause much trouble especially if you are rooted, trying to OC and is generally slowein my opinion[/QUOTE]

Thank you, Grim. That's disappointing to hear about JB, but if you think that my current build is better than that (which makes sense considering I've seen at least one thread about downgrading from JB to ICS), then I will keep my tab on ICS for now, and thank you for your input, I appreciate it.
-Tim

If you have twrp recovery, can't you download the jb ROM from the Asus site for your region and flash it in? I'm unlocked and that's how I upgraded one version of jb to another, but my ICS to jb was ota, so in your case I can't speak from experience. There is a full upgrade, and root guide in the general section.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app

I just managed to do what you re looking to achieve.
I m pretty noob so it tok me a whole day to figure it out.
So first download jb update on asus website (pick the right one for ur type of tf300)
Flash it through adb
At that point i got jb installation working but bootloop
So i flashed jb version of twrp (adb)
I then went in recovery and flashed clean rom 2.5 which worked flawlessly
Just for the fun i did factory reset afetrwards and stock jb eventually launched right
Sent from my ASUS Transformer Pad TF300T using xda app-developers app

gst0098 said:
I'm in the same configuration, custom-ics-rom with twrp recovery on unlocked device.
I believe the first thing to do is enabling NVFLASH, that will make things safer also in the worst cases.
I did that and now hopefully I have an unbrickable device.
I'm a bit confused on how to go forward, I know that there are two versions of twrp, maybe I should install the JB version, booting inside it and then flash the downloaded JB update from ASUS site, or use the twrp for ICS for flashing and after that install the JB version ?
Anyone knows what is the correct option ?
Giuseppe
Click to expand...
Click to collapse
I successfully installed jb following the guide on this site, the only thing that was not working was the flashing of the stock rom, neither given options worked (fastboot flash recovery or fastboot flash system) , I discovered that our eepad has a partition nmed staging used for firmware installs. I then flashed with
fastboot flash staging blolb
and all went good.
Btw I find the JB better than ics, more responsive and smoother, and also if it is not yet overcooked.

[Q]

Hi everyone
First off I would like to thank everyone who contributes on this board, I have been lurking for quite awhile even though I dont have any android devices, the reading is very interesting.
I have just got my first android device today delivered from BH Photo (I am in Australia) and have charged and powered it up. I have been reading on the forums about rooting and then unlocking. The android version appears to be 4.0.3 (ICS).
My questions are these:
Should I root this device and unlock the bootloader with ICS, then install TWRP and make a backup of it. Once this is done then update to JB? The firmware of the tablet is (I think this is right) IM74K:US_epad_9.4.5.26-20120720 and the kernel is 2.6.39.4 [email protected] #1
or
Update the device to JB then root it, but Im a bit confused with the unlocking part here what program is used to unlock the bootloader? Is it the Asus one? Also with rooting programs which one is more commonly used for both ICS and JB? Can I apply a manual update of JB using the Ausrtalian version instead of the US one.
Sorry for all the noob questions. I have read the index and after reading it still had some questions.
Thank you for your time

deathwalker01 said:
Hi everyone
First off I would like to thank everyone who contributes on this board, I have been lurking for quite awhile even though I dont have any android devices, the reading is very interesting.
I have just got my first android device today delivered from BH Photo (I am in Australia) and have charged and powered it up. I have been reading on the forums about rooting and then unlocking. The android version appears to be 4.0.3 (ICS).
My questions are these:
Should I root this device and unlock the bootloader with ICS, then install TWRP and make a backup of it. Once this is done then update to JB? The firmware of the tablet is (I think this is right) IM74K:US_epad_9.4.5.26-20120720 and the kernel is 2.6.39.4 [email protected] #1
or
Update the device to JB then root it, but Im a bit confused with the unlocking part here what program is used to unlock the bootloader? Is it the Asus one? Also with rooting programs which one is more commonly used for both ICS and JB? Can I apply a manual update of JB using the Ausrtalian version instead of the US one.
Sorry for all the noob questions. I have read the index and after reading it still had some questions.
Thank you for your time
Click to expand...
Click to collapse
Welcome to the Community!
There are a few on-going threads regarding this same topic. You might want to read those and make sure you understand the lingo/jargon being used (like: fastboot, bootloader, Recovery, adb. etc) as well as what it's for before you start your hacking.
Some things to keep in mind
Currently to have Root access in JB, you need to get root in ICS then use OTA Keeper to maintain Root for JB update.
The Bootloader unlocker tool is from ASUS and needs to communicate with ASUS servers for it to unlock.
Unlocking the bootloader will void your warrenty. Make sure you have a good device before you do it.
You have a version of tablet (9.4.5.26) that is able to use NVFlash that can help recover your tablet during a soft brick.
You should use an update that is appropriate for your device. If it comes with US, stay with US. Installing an update for a different region might not cause problems but there is no guarantee. Best to avoid the possibility by staying with the region it comes with.
For some reading material, I think that my blog post might help give you some additional details. However, I highly suggest that it be used for research only until you are aware of exactly what you are trying to accomplish. Remember to ask questions if things are confusing or if you are wondering what needs to be done next. 'Tis better to ask and be delayed than to be over-eager and bricked.
Hope this helps you during your first steps of XDA Android hacking!

I just got my TF700 last week and I wanted cleanrom on it and this is the order of stuff I did:
1. Unlocked bootloader
2. Nvflash setup
3. Installed TWRP
4. Flashed official Asus update
5. I lost TWRP so I installed it again
6. Flashed cleanrom
Probably not the most efficient way, but it was easy to do and didn't take too long.

hong90 said:
I just got my TF700 last week and I wanted cleanrom on it and this is the order of stuff I did:
1. Unlocked bootloader
2. Nvflash setup
3. Installed TWRP
4. Flashed official Asus update
5. I lost TWRP so I installed it again
6. Flashed cleanrom
Probably not the most efficient way, but it was easy to do and didn't take too long.
Click to expand...
Click to collapse
It's the most efficient way.

I have nothing to add except for the remark that NvFlash is key -- GET IT WHILE YOU STILL CAN!
I'm not even kidding here. It gives you 100% flexibility in doing whatever you wish (up- as well as downgrading, even the bootloader!) and provides a key benefit in recovering your device when that whale-sized piece of excrement hits the large ventilator running at top speed.

Thanks to everyone that has replied to my post. I have successfully rooted the tablet and unlocked the bootloader. Before I do anything else Im going to run NVflash and back it up. I have a quick question though. I have download NVFlash to my computer and extracted it. Do I need to copy it across to the tablet and then enter fastboot? I havent got an extenal sd card will it save the images to the tablet's hard drive?
Cheers
Deathwalker

i followed this video:
https://www.youtube.com/watch?v=J3ypzUaKxvo&feature=youtube_gdata_player
i watched it before i actually did it once or twice to make sure i know what to do. you don't need an external sd card. following the fastboot steps will pull the files that you need onto the internal one in a folder

Last night I used NVFlash to make backup of the tablet. A big thank you to alienedd as I followed his blog and also the guide from androidmobi team and managed to get the img files done. Is there anyway to test bar for wiping the tablet?
Now all I have left to do is install OTA RootKeeper and TWRP, back up the existing tablet and then flash a custom ROM (Im thinking cleanrom)

You don't need OTA Rootkeeper anymore because you have unlocked you're bootloader. And custom roms like Cleanrom are already pre-rooted so after flashing the cleanrom you will have root anyway.

[Q] Rooting and Upgrades

I recently (within the last month or so) rooted my android device for the first time. I'm still kind of getting used to the new fun things I can do with it now. I'm now getting a consistent pop-up though asking me to upgrade to Android version 4.1.2, I'm currently on Android version 4.0.4. Before I do this I have a couple of questions for those of you out there with more experience and knowledge on this than me.
1) It is my understanding from reading some other posts that if I run the update through them it will overwrite my rooting, and I'll have to re-root the tablet. Is this correct?
2) Assuming that (#1) is correct, can anyone point me to a good, safe, place to download the update version 4.1.2, with steps for the proper way to run it without loosing your root access and all the data on your tablet?
Thank you in advance for any help. As I said I'm still learning a lot of this process at this point.

assuming you have a wifi only you can use this
http://forum.xda-developers.com/showthread.php?t=1936534
as long as you still have or can reflash a custom recovery.
if you need one, TWRP link in my sig

I have a Version 4G XOOM, but I don't have a dataplan for it currently, so I am only using it in the WiFi version.
So the message is, don't use the standard upgrade; use an upgrade that you flash with similar steps to the rooting process (if I am reading that all correct). Thanks for the link and the information.

rsteph49 said:
I have a Version 4G XOOM, but I don't have a dataplan for it currently, so I am only using it in the WiFi version.
So the message is, don't use the standard upgrade; use an upgrade that you flash with similar steps to the rooting process (if I am reading that all correct). Thanks for the link and the information.
Click to expand...
Click to collapse
Well you can just take the update normally if it flashes (assuming you haven't edited anything in the system) then just re root.
You don't want to flash wingray on stingray (wingray is us wifi only stingray is the lte model)

rooting my xoom
hi all I am having trouble rooting my motorla xoom model mz601
it has android 4.0.4
build # 1.7.1-45
carrier - vodaphone
the guys and gals here are very good i am sure but freely admit they cannot do this particular tablet so am asking if anyone out there knows how to root my tablet.
thnx for any and all help given

its not just wifi
runandhide05 said:
assuming you have a wifi only you can use this
http://forum.xda-developers.com/showthread.php?t=1936534
as long as you still have or can reflash a custom recovery.
if you need one, TWRP link in my sig
Click to expand...
Click to collapse
do u have another plse
as mine is the one that takes a simcard for internet access

[Q] Help flashing UNLOCKED XT926M stock 4.1.2 to CM12

I want to install a custom Lollipop ROM on my phone, but even after days of sifting through years and various iterations of information and methods, I'm pretty confused.
I have a Razr Maxx HD. I believe the model is XT926M. I bought my phone in December 2012 from Verizon and it's running Android 4.1.2 OTA (stock) currently. The currently installed ROM is 9.18.94.XT926.Verizon.en.US. I'm not using a custom recovery. The bootloader is UNLOCKED and the phone is rooted! I used the Motopocalypse exploit method from around April of 2013. I've been extremely happy with the stability of 4.1.2, after the lockup/freeze/crash bug was fixed, which is why I haven't been quick to upgrade to anything else until now. I've also been afraid to mess with the phone out of fear of doing something wrong and creating more trouble for myself than it is worth (such as a soft brick from a failed OTA upgrade). I've seen enough posts about something going wrong or experiencing glitches in flashing methods which required workarounds that I want to ask before taking any action.
So, now I want to install a recent ROM free of Verizon's bloatware, in this case CM12. However, I can't seem to find any solid guide targeted at my scenario. Most of the information I find is either outdated (old methods, old software), or for the XT925 rather than the XT926(M), or the wrong country/carrier. Additionally, I know the newer ROMs are only available for KKBL, but I'm pretty sure that I'm still on JJBL if I'm on 4.1.2 OTA, and I can't find any recent or relevant guide for getting me out of where I am starting. If I was already on KKBL, I know all I would need to do is install a custom recovery and then install a custom ROM, but I'm at a disadvantage because I'm not even there yet and it's probably the part that's confusing me most.
I don't care about losing any data on my phone - I want to start completely fresh. The only thing I've done is create a nandroid backup (using the Online Nandroid app) for both CWM and TWRP recoveries. What next?
I don't know where to begin. Can someone help steer me in the right direction? I'd greatly appreciate it if you could be as specific as possible with versions and/or links to files I would need. Thanks!