Whick oc kernal is stable in cm7.2
janarthananfit said:
Whick oc kernal is stable in cm7.2
Click to expand...
Click to collapse
The 763mhz with gpu.
801 seemed to vary, means it crashes sometimes.
This is not bad for playing purpose, but I don´t recommend it for business.
Related
guys why my galaxy fit can't handle OC up to 801Mhz? always get restart and restart again
i tried several ROMs like creed, CM7, choco,razo and still the same, can't go to 801Mhz and suddenly my phone restart
my phone can only handle and stable at 763Mhz, when i go to 774Mhz the result is not really stable, like closing app suddenly and freeze for a sec
any solution for that guys? thanks
aren't all phones basically the same?
so in this case i just unlucky?
all kernels are unstable at max and near max frequency....you can stick to anything below 750...im using 736 at razo is is as stable as stock rom...730 or 800 it shouldnt make a big deal of difference...and what app did you use to set frequency each rom dev might have mentioned the recommended one(no frills cpu control or setcpu mostly)and which governor do you use.........
i set governor ondemand and I/O deadline
almost all app freeze for a sec and then closing suddenly
but my friend's phone (galaxy fit) is stable with OC up to 800Mhz without problem
I keep my phone running on 801/245 MHz Ondemans/bfq all the time...
same with me, unestable if i try to go 740+ ... stable at 734 mhz
lomash said:
I keep my phone running on 801/245 MHz Ondemans/bfq all the time...
Click to expand...
Click to collapse
tried this, but after several minutes my phone restart again
it depends on wat ROM ur using currently... so wat are u using??
i'm using razodroid v1.0
and the op has tried oc on almost all the ROMs with same results.
lomash said:
i'm using razodroid v1.0
and the op has tried oc on almost all the ROMs with same results.
Click to expand...
Click to collapse
same with me ... i used razodroid v1, CM music edition, CM 7 RC5.5 and Chocobread v1 and still cant OC more than 734 Mhz ....
i have this problem too.
my rom is Cyanogen RC5.5 and i test OC frequency's on many roms"cyanogen music edition , CM7.2 , ..."
my phone was unstable over 740Mhz.
i test with no fillirs and Antutu benchmark and Overclock tools.
same prob...my gfit cant handle over 763..used razodroidv2 and cm roms
its not ur phones fault i think!!801Mhz is not stable yet on galaxy fit!! please wait for 801Mhz stable version b4 trying it! even my fit has issues at 801Mhz!! so chill guys!
Pretty Stable for me
can you insert the OC kernel and your Overclock App?
thanks.
hari047 said:
its not ur phones fault i think!!801Mhz is not stable yet on galaxy fit!! please wait for 801Mhz stable version b4 trying it! even my fit has issues at 801Mhz!! so chill guys!
Click to expand...
Click to collapse
hey my friend's galaxy fit is very stable using OC up to 801Mhz without any prob and issue, and the problem is why my galaxy fit can't?
i'm using RazoDroid's 801MHz OC kernel and NoFrillz CPU
i have to try out RazoDroid V1.0 on 801MHz then!!
my phone crash in 720+ mhz with all governors=(
I don't know which kernel should I flash and I really don't know what is the best stable kernel out there ?? I already tested UC Kernel v9 and it seems it's not stable..
You can delete this post if you find this is as un-useful ..
Here and there, there are only a few kernels. Bck kernel/Uc kernel/vurrut kernel. Don't overclock too much, at Max about 1.2 ghz as some phones go into random reboots beyond that frequency. Currently on bck kernel beta 13, but I change kernels quite often
Cheers
Sent from my GT-i9003 powered by Stable and Smooth CleanKpu rom
I'm currently using vurrut v5 uc. It's a very good battery saver and very stable.
try BCK...dont oc though....its stable and gives good battery life
bscraze said:
Here and there, there are only a few kernels. Bck kernel/Uc kernel/vurrut kernel. Don't overclock too much, at Max about 1.2 ghz as some phones go into random reboots beyond that frequency. Currently on bck kernel beta 13, but I change kernels quite often
Cheers
Sent from my GT-i9003 powered by Stable and Smooth CleanKpu rom
Click to expand...
Click to collapse
Thank you very much for anyone who replied to my post..
Jeah, my phone suddenly reboots when I overclock my phone to 1.35Ghz on UC Kernel.. Not sure why ..
Anyways, is BCK stable enough ?? I might switch to BCK.. I heard from some people that I can't use NoFrills or SetCPU to overclock, only on Terminal .. is this true ??
offgrey said:
I'm currently using vurrut v5 uc. It's a very good battery saver and very stable.
Click to expand...
Click to collapse
Is it stable enough ?
Silentkiller101197 said:
Is it stable enough ?
Click to expand...
Click to collapse
Very very stable. Hasn't randomly rebooted on me ever. I do make sure that cpu no frills keeps it to 1.2 ghz and below though.
offgrey said:
Very very stable. Hasn't randomly rebooted on me ever. I do make sure that cpu no frills keeps it to 1.2 ghz and below though.
Click to expand...
Click to collapse
Ok thank you kabayan for your time. I might try it soon hehehe
OK well bck kernel default is overclocked to 1.2ghz so you can use 1.2 ghz by setting it through no frills. However if you wish to change the frequency at each opp(meaning steppings), then use the commands given in his thread.
Cheers
Sent from my GT-i9003 powered by Stable and Smooth CyanogenMod 9!
MIUI V4 screemshots for galaxy 3 show cpu 1.2 ghz . The cpu of my galaxy3 is 600 mhz. Is it overclocked or what? Please someone tell me!
Please tell me fast I want to flash this ASAP!
t4nchan said:
MIUI V4 screemshots for galaxy 3 show cpu 1.2 ghz . The cpu of my galaxy3 is 600 mhz. Is it overclocked or what? Please someone tell me!
Click to expand...
Click to collapse
please tell me ASAP... The ROM is ****ingly aweosome!
PATIENCE!
Our phone runs at 667MHz and the kernel in MIUI V4 runs at 1.2 GHz because it is overclocked kernel. If you don't want to mess up your phone by overclocking, flash this rom anyways, but then flash NON-OC kernel. I think G3MOD 2.5 NON-OC should work with it.
If you don't want to overclock your phone, you will notice some (big) lag probably with MIUI.
Kk......
twinky444 said:
PATIENCE!
Our phone runs at 667MHz and the kernel in MIUI V4 runs at 1.2 GHz because it is overclocked kernel. If you don't want to mess up your phone by overclocking, flash this rom anyways, but then flash NON-OC kernel. I think G3MOD 2.5 NON-OC should work with it.
If you don't want to overclock your phone, you will notice some (big) lag probably with MIUI.
Click to expand...
Click to collapse
thanx ..and I don't know if you are dude or girl but can you suggest me a nice ROM where all features work. Like in most ROMs bluetooth and mobile data doesn't work!
got rid of stock one!:crying:
t4nchan said:
thanx ..and I don't know if you are dude or girl but can you suggest me a nice ROM where all features work. Like in most ROMs bluetooth and mobile data doesn't work!
got rid of stock one!:crying:
Click to expand...
Click to collapse
Try purumod or indroid v6 (download link for this is in the general section)
Sent from my GT-I5800 using xda app-developers app
hello
so i have cm 10.1 (4.2.2) and i have flashed the newest matr1x kernel to have 1.32 ghz
this is working but the phone is often reboot if i look at picures .. play a game or set settings on settings ..
what i must do pleas help me
and sorry for my bad english
Emre34 said:
hello
so i have cm 10.1 (4.2.2) and i have flashed the newest matr1x kernel to have 1.32 ghz
this is working but the phone is often reboot if i look at picures .. play a game or set settings on settings ..
what i must do pleas help me
and sorry for my bad english
Click to expand...
Click to collapse
First I think that this shouldent be in this section, but this is not my concern, second to answer your question, Matrix is one of the best kernels for Nexus S (my personal favorite is Marmite but still this is good), so I thinkl it's safe to say that this is not a kernel related issue but rather a owerclock one, be sure that there is a reason why Samsung clocked the procesor at 1GHz
Emre34 said:
hello
so i have cm 10.1 (4.2.2) and i have flashed the newest matr1x kernel to have 1.32 ghz
this is working but the phone is often reboot if i look at picures .. play a game or set settings on settings ..
what i must do pleas help me
and sorry for my bad english
Click to expand...
Click to collapse
first of all... this is written in the wrong place...
anyway, try version 24.0 of matr1x. it works on my nexus s.
the v25 of matr1x kernel is working on 1.2 normaly ...
is the marmariv or the v24 working with more clock speed ?
Emre34 said:
the v25 of matr1x kernel is working on 1.2 normaly ...
is the marmariv or the v24 working with more clock speed ?
Click to expand...
Click to collapse
marmite is more stable but it is not good for overclocking.
on matr1x v25.0 i couldnt overclock because i had the same problem with you. rebooting.
the only kernel i was able to overclock cpu without any reboot problem is matr1x v24.0 on 1320 mhz
now i am using marmite and i dont even try to overclock because i dont need more cpu power. it drains so much battery...
NickName98 said:
marmite is more stable but it is not good for overclocking.
on matr1x v25.0 i couldnt overclock because i had the same problem with you. rebooting.
the only kernel i was able to overclock cpu without any reboot problem is matr1x v24.0 on 1320 mhz
now i am using marmite and i dont even try to overclock because i dont need more cpu power. it drains so much battery...
Click to expand...
Click to collapse
thank you i have installed the v24 and do a overclock now i dont have problems
i hope i will never have been
Why the last version of ics can't be overclocked?I mean,it can with another kernel,but why all devs who release a cm9.2.2 version use default kernel which can't be overclocked (max value) [IcySnap 2.0,NFE 6.0,maybe HardLight 4.0,etc] ? Is the phone actually working better at 600 mhz than 710 + for example? Any answer will be appreciated and please stick to the topic !
Ps* Sorry for wrong section!
As I know they can especially with 3.0.8 kernel
Sent from my LG-P500 using xda premium
The phone actually works better at 600mhz. You can try overclocking with sweetnsour kernel, but you will notice that after overclocking phone runs bit laggy and benchmarks scores also decrease. Maybe its limitation of ICS + 3.0.x kernels.
Overclocking works fine with cm10.1 which has 3.0.8 kernel.
But for games for example,won t them run better with oc?Or I guess you can t have both: a little games performance & smooth ui?
Sent from my LG-P500 using xda premium
It was disabled in stock CM9.2.2 kernel by hephappy. You can use custom kernel by sweatnsour or DJNoXD (look at Original Android Development forum) and then you can OC your phone. In my opinion, beta 5 by DJNoXD (also 3.0.x based kernel) is the best.
sarus_b said:
The phone actually works better at 600mhz. You can try overclocking with sweetnsour kernel, but you will notice that after overclocking phone runs bit laggy and benchmarks scores also decrease. Maybe its limitation of ICS + 3.0.x kernels.
Overclocking works fine with cm10.1 which has 3.0.8 kernel.
Click to expand...
Click to collapse
I agree with you. :good: