Huge thanks to the many talented developers out there including (in no particular order) but not limited to:
chris41g, mkasick, Rodderik, nubecoder, earthbound, toadlife, thomasskull666, DRockstar, supercurio, Ezekeel, SenseiSimple, noobnl, xcaliburninhand, k0nane
See the feature table below the download section. I've maintained the same features in all the kernels (except where noted), so just download the corresponding kernel for your EL30 ROM and flash in CWM.
There seems to be some confusion around. Just because you are on the EL30 modem, does NOT mean you are on an EL30 ROM.
***This is the thread for the EL30 Shadow Kernels. If you need the EI22, CM7, or MIUI kernels, see this thread.***
**To help with bug posts, please state which kernel version and ROM you are running. Thank you.**
------------------------------------------------------------------------------
BML
CWM - Download ShadowKernel-EL30-v2.0+OC/UV [Mirror]
ODIN - ShadowKernel-EL30-v2.0.tar.md5 [Mirror]
MD5: 18119924f14e230f6a9706ceec08ffa1
**Place this in ODIN PDA slot to give you the Root and CWM in one quick step. Best method for users on Stock EL30 without CWM.**
------------------------------------------------------------------------------
MTD
Download ShadowKernel-EL30-MTD-v3.0+OC/UV
------------------------------------------------------------------------------
Features:
- Root
- Ext4 support
- init.d support
- 3 button hard reset
- kexec support
- bootanimation.zip support
- Linux wired tether (RNDIS) support
- Installs Bash if not present
- Reboot to CWM Recovery support
- Built-in TUN, CIFS, FUSE, & TCPMSS
- Keyboard & other mkasick patches
- Additional CPU Governors: SmartassV2 & interactiveX
- Additional I/O Schedulers: BFQ & SIO
- Overclocking/Undervolting support up to 1.4GHz with Voltage Control support. (Added 600, 900, 1100, 1200, 1300, & 1400)
- Voodoo Sound (use the free Voodoo Control App)
- Voodoo COLOR (also in the free Voodoo Control App)
Much more to come.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Additional Resources:
See this thread for color setting discussion, but remember to experiment and find the right settings for you:
http://forum.xda-developers.com/showthread.php?t=1002090
this one for me
reserved just in case
Woot my first first
Now i just need a good rom
Sent from my Kindle Fire using xda premium
AOD_Corwin said:
Woot my first first
Now i just need a good rom
Sent from my Kindle Fire using xda premium
Click to expand...
Click to collapse
They'll be coming soon enough. I just didn't want them waiting on a kernel.
Made the mistake today thinking i could run the el30 hot spot hack just cause i had the modem. Had to pit back to ec05 to fix that mess. They cant come fast enough for me.
Sent from my Kindle Fire using xda premium
so if Im on cm7 nightly el30 this Kernel would work or not? sorry if doesnt make sense
seoulseek80 said:
so if Im on cm7 nightly el30 this Kernel would work or not? sorry if doesnt make sense
Click to expand...
Click to collapse
You need to stick with the other kernel thread for CM7 kernels. Link is provided above the downloads in the OP.
bbelos said:
You need to stick with the other kernel thread for CM7 kernels. Link is provided above the downloads in the OP.
Click to expand...
Click to collapse
gotcha. thats what I figured
Thank You Kindly 4 This EL30 Kernel and THX 4 Help 2 Get Me Back 2 Rooted from a stock EL30 start in just ONE Very Easy Step !!!
TexasEpic4G said:
Thank You Kindly 4 This EL30 Kernel and THX 4 Help 2 Get Me Back 2 Rooted from a stock EL30 start in just ONE Very Easy Step !!!
Click to expand...
Click to collapse
You're welcome. Caught me before I even had a chance to post it.
I have added an ODIN Tar to the OP. Works for anyone, but it's mainly for users on completely stock EL30, such as after the OTA update, or after using toadlife's ODIN packages. It will give you the Rooted EL30 ShadowKernel and CWM 5.0.2.7 all in one step.
This should be obvious, but DO NOT use if you are on an MTD ROM.
bbelos said:
You're welcome. Caught me before I even had a chance to post it.
I have added an ODIN Tar to the OP. Works for anyone, but it's mainly for users on completely stock EL30, such as after the OTA update, or after using toadlife's ODIN packages. It will give you the Rooted EL30 ShadowKernel and CWM 5.0.2.7 all in one step.
This should be obvious, but DO NOT use if you are on an MTD ROM.
Click to expand...
Click to collapse
I can vouch this works = very easy .......... once again , the ODIN tar is ONLY for folks currently Stock EL30 Non-Rooted
---------- Post added at 11:52 PM ---------- Previous post was at 11:11 PM ----------
here's a little sumthing 4 ya bbelos and 4 anyone who uses this kernel
http://i1202.photobucket.com/albums/bb374/TexasEpic/ShadowKernel.png
TexasEpic4G said:
I can vouch this works = very easy .......... once again , the ODIN tar is ONLY for folks currently Stock EL30 Non-Rooted
---------- Post added at 11:52 PM ---------- Previous post was at 11:11 PM ----------
here's a little sumthing 4 ya bbelos and 4 anyone who uses this kernel
http://i1202.photobucket.com/albums/bb374/TexasEpic/ShadowKernel.png
Click to expand...
Click to collapse
My first banner. Very nice. I'm honored.
TexasEpic4G said:
I can vouch this works = very easy .......... once again , the ODIN tar is ONLY for folks currently Stock EL30 Non-Rooted
---------- Post added at 11:52 PM ---------- Previous post was at 11:11 PM ----------
here's a little sumthing 4 ya bbelos and 4 anyone who uses this kernel
[IMG]http://i1202.photobucket.com/albums/bb374/TexasEpic/ShadowKernel.png[/IMG]
http://i1202.photobucket.com/albums/bb374/TexasEpic/ShadowKernel.png
Click to expand...
Click to collapse
I love sonic!!!
Sent from my SPH-D700 using Tapatalk
Wow using this on sleeper rom el30 mtd and its running really well... staying nice and cool... running the n64oid at 1400mhz and can't even get it up past 102 degrees! Awesome job... this is the first of the shadow kernel series that my phone has liked... of course I haven't used it since you added oc to the ei22 kernel... impressive job bbleos! Thanks!
Sent from my SPH-D700 using Tapatalk
Nice !!
Awesome Coronel
Just flahed 3.0 tw mtd version of this over an alpha build of thunderhawk 4.0 EL30. In about phone it still shows tw mtd v0.5+oc. Can anyone confirm proper tags after flashing over any EL30 rom?
Edit: a mtd el30 rom that is...
jeffro18 said:
Just flahed 3.0 tw mtd version of this over an alpha build of thunderhawk 4.0 EL30. In about phone it still shows tw mtd v0.5+oc. Can anyone confirm proper tags after flashing over any EL30 rom?
Edit: a mtd el30 rom that is...
Click to expand...
Click to collapse
I just downloaded it fresh (dev-host sucks now) and reflashed it (I even flashed a different kernel first ) and I see it properly displaying Shadow-EL30-MTD_v3.0+OC.. so uh.. bad download? Were you on kernel v0.5 before flashing kernel v3.0?
bbelos said:
I just downloaded it fresh (dev-host sucks now) and reflashed it (I even flashed a different kernel first ) and I see it properly displaying Shadow-EL30-MTD_v3.0+OC.. so uh.. bad download? Were you on kernel v0.5 before flashing kernel v3.0?
Click to expand...
Click to collapse
Yup, definitely a bad download. I should have known since random's 3.4 gave me similar issues earlier thanks to dev host. Sorry, I have been doing some crazy multitasking between kids, setting up my brother in law's fascinate, and other distractions. I see the file was only 10kb now that I have a minute to breathe and focus on my rig again. Thanks for your always quick support. I'll get it to properly flash in a bit and throw you some feedback. Tomorrow is my first day off in 14 days, so I can give it a good run down. Totally forgot about this kernel untill today lol.
Sent from my SPH-D700 using xda premium
It seems like all dev-host files are only being downloaded as 10kb files when downloading on the phone. Must be due to the new page design or something. They seem to download fine from a computer. I will be moving away from dev-host if it stays like this.
Sent from my SPH-D700 using XDA App
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My HoneySenseHD Splash screen
This ROM was first created by Samuel2706, however he is very busy, so by the request of many users I picked the best release and updated it for the community.
Enjoy!
Features:
Android 2.3.3
Sense 2.2 with 3.0 parts added
Honeycomb theme
LordModNCT 4.0 CFS Kernel
Ondemand CPU governor as default
CPU Settings - Wake: 230-1.3MHz
CPU Settings - Sleep: 122-460MHz
Max O/C 2GHz
Rooted and Superuser added
Unsecured boot.img
Various tweaks for speed improvements
Battery calibration script
Multilingual ROM
Zipaligned @ system/app and data/app on boot
Fully de-odexed
init.d scripts (BusyBox run-parts) support
NANO text editor & sysro/sysrw commands support
EXT 4 VERSION
Improved battery life
Updated various pieces of build.prop
Automatically detects if phone is Inspire 4G and installs corresponding files
Click to expand...
Click to collapse
Donate Here!
As I am putting time from my own tight schedule into this project, any donation is a good one, and will be gladly accepted
Download here: http://www.multiupload.com/WVIDAXA610
Installation Instructions:
1. Download ROM
2. Reboot into recovery (preferably 4EXT Recovery)
3. Do "Wipe Data/Factory Reset"
4. Wipe Cache
5. Wipe Dalvik Cache
6. Format System
7. Format Boot
8. Flash ROM
reserved....
also reserved.......
also also reserved
ok where am i supposed to be clicking to download cuz im not getting a zip file just a bunch of ads from the site. please help
cuddles11a said:
ok where am i supposed to be clicking to download cuz im not getting a zip file just a bunch of ads from the site. please help
Click to expand...
Click to collapse
It's multiupload, there's multiple download links after clicking the link I posted.
Sent from my infallible Inspire 4G using xda premium
Whats new in this one? Its been a while since I've seen a honey update
Sent from my Desire HD using XDA App
fredy915 said:
Whats new in this one? Its been a while since I've seen a honey update
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Kernel, some smoothness tweaks (because I flashed it and remembered why I hated sense), uhhh... Themed browser icon... and other smaller things.
Sent from my infallible Inspire 4G using xda premium
Dumb question but im not exactly sure how to get to ext4 recovery.... I D/Led AndRev once and it automatically took me to it but i fear new things so quickly talked to a friend about how to get back to CWM. Is it neccesary or just recomended? Is the advantages to ext4?
---------- Post added at 06:50 AM ---------- Previous post was at 06:47 AM ----------
This wilmake me late to work today (flashing, and setting up) but i think it will be worth it. I need a new ROM more than tosepeople need theyre hardwood floors done. THanks man, it looks awesome
Diesel321 said:
Dumb question but im not exactly sure how to get to ext4 recovery.... I D/Led AndRev once and it automatically took me to it but i fear new things so quickly talked to a friend about how to get back to CWM. Is it neccesary or just recomended? Is the advantages to ext4?
---------- Post added at 06:50 AM ---------- Previous post was at 06:47 AM ----------
This wilmake me late to work today (flashing, and setting up) but i think it will be worth it. I need a new ROM more than tosepeople need theyre hardwood floors done. THanks man, it looks awesome
Click to expand...
Click to collapse
4EXT Recovery can be found on page two of the DHD android development forums, or by searching the forum. it is updated by the 4ext recovery app that I will include in the next update.
killersloth said:
Kernel, some smoothness tweaks (because I flashed it and remembered why I hated sense), uhhh... Themed browser icon... and other smaller things.
Sent from my infallible Inspire 4G using xda premium
Click to expand...
Click to collapse
Ah thanks i might try it out
Sent from my Desire HD using XDA App
thanks man i got the app from the market for 4ext Ive been running this rom all day and battery life is good (didnt listen to my headphones much today so that will be the real test, but so far so good) Its pretty damn fast and i havent had ANY FCs. So im a happy rooter today! and i ran your supercharger with it but was trying to do something else at the time so i may need to un/redo it. But you guys have done it again Thanks
i just downloaded it thru rom manager i think this was the same one stuff kept forceclosing so i changed thanks tho.
cuddles11a said:
i just downloaded it thru rom manager i think this was the same one stuff kept forceclosing so i changed thanks tho.
Click to expand...
Click to collapse
Actually this is a different version. The one on rom manager is Honey3d 1.1. The version in this thread is HoneySenseHD v9. They are definitely not the same.
keep getting force close! any idea anyone, i did wipe everything.
Just installed and this is a very nice and smooth Rom. I really like the new theme of the lock screen and launcher dock. I have not gotten any force closing, its actually running really smooth. If your getting force closes than you might try and installing onto all ext4 partitions using 4ext recovery. That's what I did and I have no issues.
Sent from my Inspire 4G using xda premium
yeah with 4ext recovery i encountered no issues, although the rom should be formatting partitions to ext4
Spare parts deems to FC, not when opened but once you try to open one of the options. But I never use spare parts anyways. 4extra can be found in the marketplace, just search it, if you don't know how to get from CWM. After using it for a while now I like it more, SO many more things you can do with it. But the Rom will not work with CWM so you have to switch if you want this awesome ROM
Sent from my Inspire 4G using xda premium
Which of the scripts should we flash from you killer for this Rom
CYRAXDroid said:
Which of the scripts should we flash from you killer for this Rom
Click to expand...
Click to collapse
I wouldn't advise flashing any of my uv scripts on this, as they remove virtuous oc which is used in this Rom to keep min wake freq above 122mhz
I'll whip up uv scripts that leave it intact and only uv+set lmk values
Sent from my infallible Inspire 4G using xda premium
Well, so far, we don't have a separate forum for Galaxy R (i9103) so I need to put in here...
OK, the kernel is ready. I have tested it using Quadrant benchmark, CF-Bench and continuous playing of asphalt6 & dungeon hunter 2 for hours. Smooth and without causing much heat
Below are the details of the kernel:
Features
=======
- For Samsung Galaxy R (i9103) only
- Based on Samsung open source, kernel version 2.6.36.3
- Added new frequencies: 1200 & 1300Mhz
- Setting of max 1300Mhz through SetCPU
- All stock frequencies are untouched: 216-1000Mhz
- Expose the voltage settings to be set through SetCPU
- Limit the boot up frequencies to be 216-1000 to avoid unstable boot up
- Simple IO Scheduler
- 2.6.36.4 patches
- Speed up framebuffer copy
- memory copy macros and functions fine tune
- Misc. kernel fixes
- Rooted (embedded su & Superuser.apk)
Download link
==========
Updated: 2011-11-16 2:40GMT
Version: 1.2
File: ardatdat_i9103_kernel_1.3G_v02_SIO.tar
Link: http://www.mediafire.com/?9d2t25rcqby5v4l
Mirror: http://www.zshare.net/download/961997663b9269b8/
MD5: 6E32FBCF65DADDFF42374218D494401A
Q & A
=====
Q: How to flash the kernel
A: Just flash the .tar file using Odin3 PDA (the same as flashing most of Samsung's android phone). Easily search xda forum for Odin3 and how to use it (http://forum.xda-developers.com/showthread.php?t=1262272)
Q: Will it delete all my applications, settings or files?
A: No. (should be..) It is a kernel, not ROM, therefore, nothing would be deleted
Q: What version of ROM is supported?
A: Kernel version is 2.6.36.3, it is proved to work on 2.3.4/2.3.5/2.3.6 ROM
Q: I don't need overclock (OC), can you make a non-overclock kernel?
A: The kernel itself supports max. of 1300Mhz. It doesn't mean that you need to operate in such frequencies. You can freely set your frequencies using SetCPU (for example, you can set 216/216 when screen off, and 216/1000). In such case, no OC will occur
Q: Will I be rooted after flashing this kernel?
A: Yes. I have modified the kernel to make it embedded with su & Superuser.apk
Q: How stable is OC? Will the battery drain fast? Will the phone get hot?
A: For 1200Mhz, it is quite stable. For 1300Mhz, I have experienced 1 program FC. Apart from that, I am using 216-1300Mhz for daily use and it is quite stable. Tested with asphalt6 and dungeon hunter 2 for over an hour, no FC occurs. Also, the battery doesn't feel hot (it is the advantage of tegra2 CPU )
Q: How can I revert back to the stock kernel?
A: If you have flashed CWM, and you have backup before you flash this kernel, you can choose (advance restore) to restore only the boot.img. Alternative method is to download the rooted stock kernel here (flash through Odin3 PDA): http://www.mediafire.com/?guhb64qy3h6sang
*** I will keep updating this kernel to make it better and better ***
*** Finally, flash at your own risk ***
=====================================================================
From the Samsung Open Source web site, I have downloaded the kernel source for i9103 and made modifications to it. It is good that this phone is equipped with Tegra2 CPU such that overclocking will not cause much heat problem and I can successfully overclocked to 1.3GHz
Below are some screen shots and I will release the kernel later today as I am still testing the new kernel.
For the first version, I will add in rooting (su+superuser.apk), SIO Scheduler, 2.6.36.4 patches and some minor kernel fixes. Stay tuned
(Quadrant score is: 4275)
Odin3 (Flash thru PDA):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Machine setting
Score in Antutu benchmark:
Faster than Galaxy S2
Quadrant score:
Recommended SetCPU settings:
reserved .......
Great news, glad to see that there is some dev for I9103!
Do you have in mind ICS cooking?
And this mod kernel is for what version? 2.3.4? 2.3.5 or 2.3.6?
Good news!!! I'm very happy with the normal CPU speed but it's good to see any developers for this device!!
Google86 said:
Great news, glad to see that there is some dev for I9103!
Do you have in mind ICS cooking?
And this mod kernel is for what version? 2.3.4? 2.3.5 or 2.3.6?
Click to expand...
Click to collapse
Well, for ICS, I have downloaded the source code (haven't compiled yet...). I think porting to ICS ROM will not be too easy ... as I lack all those hardware libraries and experiences. Let's wait ICS for Galaxy S2 and see how far we can reach...
This kernel is proved to work in 2.3.4 and 2.3.5. Should also be ok for 2.3.6
thats perfect then! I'm in 2.3.4 stock with rooted kernel, I think if you provide us a rooted kernel with optional OC that would be awesome , thanks!
Great news, thanks!
So great!!! Congratulations for your work ardatdat, could you confirm the ROM version? 2.3.4/2.3.5...
Wow,thats amazing man *-*
We are waiting impatiently your kernel
Thank you!!!
P.D: A beer for you
greets, really nice! :3
Details & download link for the kernel is updated in post #1. Try it out
Dose this work on galaxy Z ?
sorry for noob question.... if my phone not rooted can i use this kernal?
Sent from my GT-I9103 using XDA App
zam117 said:
sorry for noob question.... if my phone not rooted can i use this kernal?
Sent from my GT-I9103 using XDA App
Click to expand...
Click to collapse
Yes you can. And you wil get rooted after flashing this kernel.
Inkax2 said:
Dose this work on galaxy Z ?
Click to expand...
Click to collapse
Galaxy r=z
Please see more info on google: http://www.intomobile.com/2011/07/21/samsung-galaxy-r-galaxy-z-those-living-outside-sweden/
G R E A T !!!!!
Ps.: why on XDA do not exist a subforum dedicated to Galaxy R?
Thank you! I flashed it and works great. Although there isn't anything this phone was slow at, so only the various benchmark apps tell me it is actually faster!
Thanks for the Root kernel with OC.
Appreciate it alot.
1 step forward to get custom roms.
Can you also share which CWM you used and how ??
Thanks alot.
PS : Does this kernal work with ANY stock rom for 9103 ?
mrsaccess said:
Thank you! I flashed it and works great. Although there isn't anything this phone was slow at, so only the various benchmark apps tell me it is actually faster!
Click to expand...
Click to collapse
Try some Live wallpaper and Gallery widget slideshow, and you will notice lag, but I don't think that's related to CPU clock. Not to mention that color palette is scaled down to 65000 colors (just look at the Microbes Live Wallpaper).
---------- Post added at 02:09 PM ---------- Previous post was at 01:43 PM ----------
s4sixty said:
Thanks for the Root kernel with OC.
Appreciate it alot.
1 step forward to get custom roms.
Can you also share which CWM you used and how ??
Thanks alot.
PS : Does this kernal work with ANY stock rom for 9103 ?
Click to expand...
Click to collapse
I gues since there is no any custom roms it only works with stock ones
s4sixty said:
Thanks for the Root kernel with OC.
Appreciate it alot.
1 step forward to get custom roms.
Can you also share which CWM you used and how ??
Thanks alot.
Click to expand...
Click to collapse
There is a CWM version 4.0.0.2 that works with the phone. I just found (and flashed) today myself.
I found it at a Chinese forum and at a Spanish forum. Downloaded from both and had the same flashable tar (checked with diff), though different apks (which I didn't install anyway).
Try it from here: http://www.megaupload.com/?d=Q33VEDF0
I am terribly sorry but I can't find from which forum I originally got this link. It isn't mine work of course.
After flashing with ODIN (the same way you flashed the rooted kernel), to enter into recovery turn on the phone and while it is on the Galaxy R boot screen, press voulme up and home together. Do not press them before powering on because your phone won't turn on, instead it may block and you will have to remove the battery for some seconds.
---------- Post added at 05:43 PM ---------- Previous post was at 05:38 PM ----------
nedooo said:
Try some Live wallpaper and Gallery widget slideshow, and you will notice lag, but I don't think that's related to CPU clock. Not to mention that color palette is scaled down to 65000 colors (just look at the Microbes Live Wallpaper).
Click to expand...
Click to collapse
Will do!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Presents
bhundven's
Subtly Modified Stock CWM 5 KJ6 KernelTHIS KERNEL HAS BEEN DEPRECATED. USE BHUNDVEN'S BLASTOFF KERNEL INSTEAD.
http://forum.xda-developers.com/showthread.php?t=1828171
NOTES
Need help with BLN? Check here: BLN Support
This kernel is still in beta! Please help us test for stability. Logs are always welcome
This is still Bryan's kernel, the only changes I have made were to the initramfs and a few changes here and there to the kernel itself.
Bryan is developing again! This thread will continue to be open to discuss the new releases here unless he decides to open his other kernel thread for XDA.
FEATURES
In addition to the changes bhundven has made:
SuperSU instead of Superuser (adds root support using the kernel alone, regardless of which ROM you install this on)
BLN support added (thanks to neldar and our newest Team Acid member m4xm4n) MARKET LINK
Includes a Team Acid boot splash and recovery image (courtesy of theexel and Tablador)
Cleaned up voodoo extensions directory to remove zipalign for TW launcher
Forcing an ext4 conversion by default regardless of lagfix option
Enabled cifs, fuse and tun kernel modules
NOTES
Want to change your boot splash image? Here's a git repo that helps you do just that:
https://github.com/morfic/Samsung-logo
(Thanks to tablador who linked me to this!)
INSTRUCTIONS
Download the kernel zip file
Flash it using CWM
Wipe the Dalvik Cache before you reboot! (CWM > Advanced > Wipe Dalvik Cache)
If you are already rooted, you can also use the SGS Kernel flasher
DOWNLOADS
kernel-sms-kj6-v0.2.0-bml.zip (MD5: 9cc2278d0d00c61210e1311181de0b67)
Older Versions: Sourceforge
SOURCE CODE
Android SGS4G Kernel at GitHub
Android SGS4G Initramfs at GitHub You might want to use the voodoo branch, not master!
Want to learn how to build the kernel from source? Look at these instructions:
Building From Source
CHANGELOG
Apr 11, 2012
v0.2.0
Enable SVNET_WHITELIST to fix wakelock reboot problems
Bump version to '-sms-kj6-v0.2.0-bml'
Integrated lights.s5pc110.so into the initramfs to add BLN support
-- The kernel itself now copies the file to the rom instead of doing it via CWM
The CWM zip should no longer cause your phone to reboot after the kernel flashes
April 8, 2012
v0.1.1-rc3
Now using SuperSU instead of Superuser
BLN support added (thanks to neldar and our newest Team Acid member m4xm4n)
You need the BLN Control app from the market to use BackLightNotifications! MARKET LINK
February 24, 2012
v0.1.1-rc2
Now using Team Acid's changes to voodoo initramfs
Removed a lot of unneeded checks and their included files since we're only dealing with the sgs4g
Added battery capacity check before voodoo lagfix
Modified the ext4 conversion process to use the bonsai defaults
Forcing an ext4 conversion by default regardless of lagfix option
Removed check for froyo anti_boot_glitch since this is a GB kernel
Enabled cifs, fuse and tun kernel modules
Click to expand...
Click to collapse
Here is Bryan's OP, at the link below
http://forum.xda-developers.com/showthread.php?t=1380331
Flashing.. thanks team acid!!!!!
Sent from my SGH-T959V using Tapatalk
Gasps holy snizzap thanks for this man!!!!!
Sent from my SGH-T959V using XDA App
FB,
I have had to revert both my wifes and my phone to version 2d because of random reboots and locking up with the last 2 of Bhund's releases. Been back on 2d for 6 days now, not a single reboot or lock-up. Do you believe any of the changes you have made will prevent this happening? Or should I stay on 2d for now?
As always, thanks for the contribution.
At the moment it's essentially the same as Bryan's kernel. I've only changed some of the voodoo files right now but you can test if you wish
htaak said:
FB,
I have had to revert both my wifes and my phone to version 2d because of random reboots and locking up with the last 2 of Bhund's releases. Been back on 2d for 6 days now, not a single reboot or lock-up. Do you believe any of the changes you have made will prevent this happening? Or should I stay on 2d for now?
As always, thanks for the contribution.
Click to expand...
Click to collapse
Sent from my SGH-T959V using XDA App
FB you are the man!
Awesome work.
I've looked at Bryan's commits between 0.1.0 and 0.1.1 and actually there was not much. The changes were only to the config file to disable DMA, DIDLE, and some serial interface that got there from aries config. Bigger changes that brought in some kernel code happened before 0.1.0. But the 0.1.0 does not make my phone reboot, and the latest changes don't seem to be significant enough to cause reboots.
I'm going to try this build and see how it behaves. Maybe it was something silly like Bryan's 0.1.1 build was somehow damaged during compilation/linking/packaging.
Good job FB!
Can we do a FULL nandroid restore with this?
Jerry D said:
Can we do a FULL nandroid restore with this?
Click to expand...
Click to collapse
Well its basically Bryan's kernel so I'm pretty sure u can.
-Sent From My Amazing SGS4G-
iHelper said:
Well its basically Bryan's kernel so I'm pretty sure u can.
-Sent From My Amazing SGS4G-
Click to expand...
Click to collapse
Ya. And I did before.. I'm embarrassed to admit that I forgot the issue that made my stop using the CMW 5 version. I probably should've posted in the stupid questions thread.
Thank you for your reply
Big Thanks FB! And Team Acid!
Just flashed and love your new logo..sorry for the stupid question about full restore. I kinda fell behind a little and even forgot some stuff lol.
Hell yeah Team ACID
Looks like that freenode session had some results. I'll give it a go. Thanks.
Pure awesome.
Freaking Brilliant 251
So did cleaning up voodoo scripts allow faster boots.
Sent from my SGH-T959V using xda premium
I had some random reboots when I first flashed Valhalla Black but not sure if it was from the kernel or the ROM. Either way, it was most likely something I screwed up.
Just flashed this new update on my phone and it seems like everything transitions way faster than it used to. And all my apps seem to load faster. I'm mostly sober so I'm reasonably sure I'm not seeing things
Anyway, I don't talk on here much cuz I only get half of wtf you guys are talking bout. Plus there's too many lazy ingrates. But FB, you and the other actual decent people who spend hours working for free have made owning this phone a blast. Thanks for everything you all do and if there's ever anything I can do that doesn't require hard work of any kind, lemme know.
Sent from my A500 using xda premium
Thanks FB, working great.
Sent from my SGH-T959V using XDA App
airfluip1 said:
So did cleaning up voodoo scripts allow faster boots.
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
Not yet. I'm gonna be doing some more work on the scripts tonight since the kernel takes WAY too long to boot. What I noticed from a quick logcat inspection I did before I left home in the morning, it's zipaligning everything every time. I'm thinking it'd be better to only force the zip align once a week so that way you still get speedy apps and you don't have to suffer every time you reboot .
AntonX said:
I've looked at Bryan's commits between 0.1.0 and 0.1.1 and actually there was not much. The changes were only to the config file to disable DMA, DIDLE, and some serial interface that got there from aries config. Bigger changes that brought in some kernel code happened before 0.1.0. But the 0.1.0 does not make my phone reboot, and the latest changes don't seem to be significant enough to cause reboots.
I'm going to try this build and see how it behaves. Maybe it was something silly like Bryan's 0.1.1 build was somehow damaged during compilation/linking/packaging.
Click to expand...
Click to collapse
Hmm. Has it been only certain ROMs giving you reboots? I haven't had issues so far but I have my phone in my pocket all day so I haven't noticed if it does reboot.
Modified kernel (Fb) + VB (Raver) + Adrenaline shot VB with scroll cache tweak (dsexton) = Triple acid burn!
Huge thanks to the many talented developers out there including (in no particular order) but not limited to:
chris41g, mkasick, Rodderik, nubecoder, earthbound, toadlife, thomasskull666, DRockstar, supercurio, Ezekeel, SenseiSimple, noobnl, xcaliburninhand, k0nane
See the feature table below the download section. I've maintained the same features in all the kernels (except where noted), so just download the corresponding kernel for your FC09 ROM and flash in CWM.
There seems to be some confusion around. Just because you are on the FC09 modem, does NOT mean you are on an FC09 ROM.
***This is the thread for the TW FC09 ShadowKernels. If you're looking for a ShadowKernel for another ROM, see the links at the end of the OP.***
**To help with bug posts, please state which kernel version and ROM you are running. Thank you.**
------------------------------------------------------------------------------
BML
** Fixed LED notifications **
CWM - Download ShadowKernel-FC09-v1.0.1[Mirror]
MD5: 2157e639ee16b4f144c6b28341c5c753
ODIN - Coming soon
**Place this in ODIN PDA slot to give you the Root and CWM in one quick step. Best method for users on Stock FC09 without CWM.**
------------------------------------------------------------------------------
MTD
** Fixed LED notifications **
CWM - Download ShadowKernel-FC09-MTD-v1.0.1 [Mirror]
MD5: 9b6e59c20ab2fec76cade59e53ccabda
------------------------------------------------------------------------------
Features:
- Root
- Ext4 support
- init.d support
- 3 button hard reset
- kexec support
- bootanimation.zip support
- Linux wired tether (RNDIS) support
- Installs Bash if not present
- Reboot to CWM Recovery support
- Built-in TUN, CIFS, FUSE, & TCPMSS
- Keyboard & other mkasick patches
- Additional CPU Governors: SmartassV2 & interactiveX
- Additional I/O Schedulers: BFQ & SIO
- Overclocking/Undervolting support up to 1.4GHz with Voltage Control support. (Added 600, 900, 1100, 1200, 1300, & 1400)
- Voodoo Sound (use the free Voodoo Control App)
- Voodoo COLOR (also in the free Voodoo Control App)
Much more to come.
Full github kernel source.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Additional Resources:
See this thread for color setting discussion, but remember to experiment and find the right settings for you:
http://forum.xda-developers.com/showthread.php?t=1002090
Changelog:
- v1.0.1: Fixed LED notification permissions.
Previous Versions:
BML
v1.0:
CWM - Download ShadowKernel-FC09-v1.0
MD5: 02a75d62a8cb12075d36130950de5963
MTD
v1.0:
CWM - Download ShadowKernel-FC09-MTD-v1.0
MD5: 93a5f3c7a010de96d86bc8fd12131b7b
Other Shadow Kernels:
Links coming soon.
Reserved for me
Another one.
Version number
Yes, I know I started back over with v1.0, but it's got FC09 in the build version, so hopefully I don't confuse people. I doubt anyone would still be using the old v1.0 kernels anyway. So, sorry for the delay, and I hope everything still works
First!
Great to have you back and putting this out as well as taking time out from CM9! Thanks man!
Sent from my SPH-D700 using xda premium
Thank you very much sir
sent from an epic touch phone
He's Baaaaaaacccckkkkkkkk .............
Congrats on your recent advancements w/ your various projects...........stoked to see this re-release!
Sent from my SPH-D700 using xda premium
Ily ily ily ily
sonarchist said:
Congrats on your recent advancements w/ your various projects...........stoked to see this release!
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Don't get too excited. I haven't added anything new yet It's just patched up to FC09. But expect to see some modifications in the future.
I was literally about to ask about this in the People's ROM thread tonight. Thanks bbelos, your work is GREATLY appreciated!
bbelos said:
Don't get too excited. I haven't added anything new yet It's just patched up to FC09. But expect to see some modifications in the future.
Click to expand...
Click to collapse
been playing w/ a few tw/mtd ROMs recently, sufficiently to appreciate your good + stable work --as it addresses concerns similar to those that inspired the devs..........an updated bbelos classic is welcome at the table anytime
Thanks a ton...always can use a shadow
Sent from my SPH-D700 using xda premium
Who knows what evil lurks in the hearts of ROMs?
The Shadow Knows
HAHAHAHAHAHAHAHAHAHAHAHAHAHAHA!
kennyglass123 said:
Who knows what evil lurks in the hearts of ROMs?
The Shadow Knows
HAHAHAHAHAHAHAHAHAHAHAHAHAHAHA!
Click to expand...
Click to collapse
Maybe a Rom Populei v3, Kenny????
Downloaded last night, but i'm out of the country so won't flash till this weekend. I thank Mr BB a ton and welcome him back to TW with open arms
Has anyone been using this after coming from the No-LED version of Samurai? That's my situation, and I noticed that it doesn't appear the LED notifications are working in this kernel either.
Frankly, I prefer it that way, but I didn't know if bbelos was aware of the issue, or if it's only me...
Good point. Bbelos, Samsung screwed up the LED calls. I think you need to edit them to the EL30 numbers for the LED notifications to work.
Sent from my SPH-D700 using xda premium
kennyglass123 said:
Good point. Bbelos, Samsung screwed up the LED calls. I think you need to edit them to the EL30 numbers for the LED notifications to work.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
I think we all noticed at the same time.
So even though this is an MTD kernel, this won't work with CM9?
I saw the note about these are just TW kernels and second guest whether I could use it with CM9 Beta 3.
frankwhite8536 said:
So even though this is an MTD kernel, this won't work with CM9?
I saw the note about these are just TW kernels and second guest whether I could use it with CM9 Beta 3.
Click to expand...
Click to collapse
Aside from CM9 requiring it's own non-TW kernel, it's also an ICS rom while this is a Gingerbread Kernel.
-------------------------------------------------------------------------------------------
Files and source:
www . der kernel . com
Flash the kernel designated for your rom, either CM9 (We'll get to that shortly) or STOCK.
No CM10. When? When they are ready.
-------------------------------------------------------------------------------------------
Kernel Alpha2 linked here: http://goo.gl/2NBYs (We will get them integrated on the site soon.)
This is for LF2e, LG1
Alpha7: http://goo.gl/RbuLm
This is for LF2e, LG1 and boots @ 1728MHz
Featuring:
Offering lowered voltages
Build optimizations
Performance through research
Removed wasteful debugging
Scheduler, Governor tweaks
Improved Colors (Fixed as of right now)
480MHz GPU
Up to 1836MHz or 1728 (will be noted in filename on future releases)
Bull**** Free (Not pushing buzzwords to drop them later like others)
Omg yes!
Wiped cache and dalvik. Flashed and rebooted. On stock rom. Gonna do some tests. This is awesome. I miss this kernel so much from when I had my nexus. Trinity ftw.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Better then stock by like 600 score.
This is at 1512 mhz. Stock setting on this kernel build. However you can change it to 1700+ using the toolbox. I haven't though.
Can't wait for more development towards this.
Sent from my SCH-I535
Woot
Sent from my Galaxy S3 "the best iPhone yet"
Wish when we installed the toolbox there was more settings to play with. I assume this is because the kernel doesn't have tons of options yet.
Also experienced some form of bug. Had the toolbox installed and randomly after like an hour uptime I opened it and minimum cpu was set to like 1.1ghz. When it's stock set to 384, and I did not have set on boot enabled. So I couldn't have changed it. I un installed the toolbox and rebooted.
Sent from my SCH-I535
Glad you made it! Can't wait for some JB with colors!!
Does this tweak LTE at all? My speeds tripled with this kernel. Nice!
Sent from my SGS3 on Synergy Nightlies
Schaweet said:
Does this tweak LTE at all? My speeds tripled with this kernel. Nice!
Sent from my SGS3 on Synergy Nightlies
Click to expand...
Click to collapse
Just Samsung source with build tweaks, nothing addressing LTE specifically.
No dice on CleanROM for me. I figured it was "stock" enough as it is odexed and TW based.
Darn.
Sent from my SCH-I535 using Tapatalk 2
Works great on cleanrom for me.
Sent from my SCH-I535 using xda app-developers app
1ManWolfePack said:
No dice on CleanROM for me. I figured it was "stock" enough as it is odexed and TW based.
Darn.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Grab a LG2e or LG1 based rom.
Sent from my SGH-T999 using Tapatalk 2
morfic said:
Grab something LG2e or LG1 based.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Figured it was user error. I have trouble on your site from my phone. Getting on my PC now...
Sent from my SCH-I535 using Tapatalk 2
---------- Post added at 03:30 PM ---------- Previous post was at 03:18 PM ----------
Alright, guys - I'm stuck. I usually don't need help, but I do today.
Morfic: You were telling me to download a stock kernel using that base, correct? Or were you telling me to switch ROMs to one with that base?
2nd - to the guy saying he successfully flashed to CleanROM. Can you please tell me the name of the file? I've looked on his website and in the toolbox, here is what I get:
TGST-STK-UVALEM-ICS-1728-ALPHA50
Appreciate the help, guys.
1ManWolfePack said:
Figured it was user error. I have trouble on your site from my phone. Getting on my PC now...
Sent from my SCH-I535 using Tapatalk 2
---------- Post added at 03:30 PM ---------- Previous post was at 03:18 PM ----------
Alright, guys - I'm stuck. I usually don't need help, but I do today.
Morfic: You were telling me to download a stock kernel using that base, correct? Or were you telling me to switch ROMs to one with that base?
2nd - to the guy saying he successfully flashed to CleanROM. Can you please tell me the name of the file? I've looked on his website and in the toolbox, here is what I get:
TGST-STK-UVALEM-ICS-1728-ALPHA50
Appreciate the help, guys.
Click to expand...
Click to collapse
I was telling you to get a rom based on LF2e or LG1, Trinity will completely replace any kernel installed.
Your Trinity kernel is linked from the OP, there are none pushed to the site yet.
EDIT: Made it clear i mean rom base in the other post, to aid other users.
The Kernel is working just fine on Beans 11
Sent from my SCH-I535 using Tapatalk 2
morfic said:
I was telling you to get a rom based on LF2e or LG1, Trinity will completely replace any kernel installed.
Your Trinity kernel is linked from the OP, there are none pushed to the site yet.
EDIT: Made it clear i mean rom base in the other post, to aid other users.
Click to expand...
Click to collapse
Gotcha. I'm LG1 based. I was reading this from Tapatalk earlier and figured your kernels were on the site as always. My bad, looks like I missed the direct link.
P.S. Ran your stuff exclusively for the most part on my Nex. Thanks for coming this way...
1ManWolfePack said:
Figured it was user error. I have trouble on your site from my phone. Getting on my PC now...
Sent from my SCH-I535 using Tapatalk 2
---------- Post added at 03:30 PM ---------- Previous post was at 03:18 PM ----------
Alright, guys - I'm stuck. I usually don't need help, but I do today.
Morfic: You were telling me to download a stock kernel using that base, correct? Or were you telling me to switch ROMs to one with that base?
2nd - to the guy saying he successfully flashed to CleanROM. Can you please tell me the name of the file? I've looked on his website and in the toolbox, here is what I get:
TGST-STK-UVALEM-ICS-1728-ALPHA50
Appreciate the help, guys.
Click to expand...
Click to collapse
No no no that's the wrong kernel. That's not for Verizon. Look at the OP and click the link that is in red.
Sent from my SGS3 on Synergy Nightlies
I totally missed the link in the OP this morning. I hadn't had my coffee and the red link in red text got lost. Lol.
Running it now. Is this Spice Melange preset?
Sent from my SCH-I535 using Tapatalk 2
1ManWolfePack said:
I totally missed the link in the OP this morning. I hadn't had my coffee and the red link in red text got lost. Lol.
Running it now. Is this Spice Melange preset?
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Man, I feel like I'm stalking you now.
Anyhow, how is this running on CleanROM? I'm about to dive in.
WizeGuyDezignz said:
Man, I feel like I'm stalking you now.
Anyhow, how is this running on CleanROM? I'm about to dive in.
Click to expand...
Click to collapse
Super F'ing smooth, man. I don't notice the color change as much as on my Nex, but that's probably because the s3 didn't need as much fixing.
Sent from my SCH-I535 using Tapatalk 2
1ManWolfePack said:
Super F'ing smooth, man. I don't notice the color change as much as on my Nex, but that's probably because the s3 didn't need as much fixing.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Hmm, I'm having an issue. System Tuner wouldn't allow me to set the CPU over 1512, it said failed applying CPU settings. So I installed Set CPU and same thing. Any idea why?
Otherwise it seems smooth!
WizeGuyDezignz said:
Hmm, I'm having an issue. System Tuner wouldn't allow me to set the CPU over 1512, it said failed applying CPU settings. So I installed Set CPU and same thing. Any idea why?
Otherwise it seems smooth!
Click to expand...
Click to collapse
Same here. On Synergy nightly.