Hi all,
i decided to leave ICS and go back to GB 2.3.6. So I unroot Nexus installing 2.3.1. Aaand whats happend? There is no OTA to 2.3.6 (I was thinking that Google should share that one since they stoped ICS update). Ok, so I install 2.3.2 (GRH78C), then try to install 2.3.3 (GRI40). But it cant be done! Why? Anyone knows? How can I direct install stock 2.3.6. To addition: Ive got 2.3.2, 2.3.3, 2.3.4 and 2.3.6 on my PC.
Check this thread, it has the full ROM: http://forum.xda-developers.com/showthread.php?t=1063664
thanks a lot, it totally helps me! i forgot about this threat
I bought the Galaxy Nexus when it first came out from Bell. I use the phone with my Rogers sim card. I am currently stuck on 4.0.1 and do not seem to recieve any updates. It is a yakjuux build. How can I update it to the most recent version? Does it have to do with using the Bell phone with my Rogers carrier?
In the same boat
I'm in the exact same boat and still on 4.0.1. Did you figure out why you're not getting updates?
Bump
I'm having the same issue. Any updates yet?
i have been using my inspire 4g for few years now with the stock 2.3.3 w/o any problem until i accepted the update notification from at&t for 2.3.5 which i hate now. Long story short, it just made my exchange email crap and it became a burden. I do not know anything about rooting so bought a used Atrix 2 hoping to have ICS on it.
But the phone came withe the following:
Android Version: 2.3.5
System Version: 55.11.11.MB865.ATT.en.US
Build Number: 5.5.1-175_EDFFW1-11
As soon as I power on, the setup screen comes in where I enter my google details and it takes me to home screen and all is well. But when I click the 'Contacts' icon, it takes me to AT&T address book directly and starts rotating endlessly. Never give me an option to disable AT&T address book in contacts. It goes directly there and never completes even though I have data and wifi enabled. I tried at&t support as i don't have at&t phonebook registered - they asked me to upgrade to ICS.
Then I tried the OTA ICS upgrade and it always says the 'The device is upto date and no software upgrade is necessary'. It never upgrades the OS. At this point, at&t said they can't do anything and asked me to talk to Motorola. Motorola said this phone is running a version that is not supported so they can't help either. I have been googling and reading a lot of posts in this forum for help without much success.
I did check out the following and asked for help there:
http://forum.xda-developers.com/showthread.php?t=2047087&page=2
http://forum.xda-developers.com/showthread.php?t=1779968&page=69
Can someone please point me a thread or give me steps i need to follow to get this phone out of stock and working condition?
I am also working on getting my inspire out of stock OS but would love to get this phone fixed first.
Thanks in advance.
jsknair said:
i have been using my inspire 4g for few years now with the stock 2.3.3 w/o any problem until i accepted the update notification from at&t for 2.3.5 which i hate now. Long story short, it just made my exchange email crap and it became a burden. I do not know anything about rooting so bought a used Atrix 2 hoping to have ICS on it.
But the phone came withe the following:
Android Version: 2.3.5
System Version: 55.11.11.MB865.ATT.en.US
Build Number: 5.5.1-175_EDFFW1-11
As soon as I power on, the setup screen comes in where I enter my google details and it takes me to home screen and all is well. But when I click the 'Contacts' icon, it takes me to AT&T address book directly and starts rotating endlessly. Never give me an option to disable AT&T address book in contacts. It goes directly there and never completes even though I have data and wifi enabled. I tried at&t support as i don't have at&t phonebook registered - they asked me to upgrade to ICS.
Then I tried the OTA ICS upgrade and it always says the 'The device is upto date and no software upgrade is necessary'. It never upgrades the OS. At this point, at&t said they can't do anything and asked me to talk to Motorola. Motorola said this phone is running a version that is not supported so they can't help either. I have been googling and reading a lot of posts in this forum for help without much success.
I did check out the following and asked for help there:
http://forum.xda-developers.com/showthread.php?t=2047087&page=2
http://forum.xda-developers.com/showthread.php?t=1779968&page=69
Can someone please point me a thread or give me steps i need to follow to get this phone out of stock and working condition?
I am also working on getting my inspire out of stock OS but would love to get this phone fixed first.
Thanks in advance.
Click to expand...
Click to collapse
If you want to get the official ICS then here is the fxz for AT&T US phones (if you are somewhere else or using a different carrier, then you probably don't want this and need to supply more info.)
A couple of things to note. Once you upgrade to the official ICS there is NO going back to Gingerbread (unless someone hacked something together and I missed it), but it's best to assume you won't. Make backups before you do anything, better safe than sorry. If you don't like not having an option to revert to Gingerbread, then there are other options, but not the one mentioned.
If all is good and you want to flash the Official ICS, then you can visit the noob guide which will tell you how to flash a FXZ and what is needed.
Thank you. I really don't like the idea of not going back to Gingerbread but at this time my priority is to get this atrix 2 up and running. So am ok to get the official ics but the following says i should go to 2.3.6 in order to get to ics. Is that still true for the link you provided?
http://forum.xda-developers.com/showthread.php?t=1779968
jsknair said:
Thank you. I really don't like the idea of not going back to Gingerbread but at this time my priority is to get this atrix 2 up and running. So am ok to get the official ics but the following says i should go to 2.3.6 in order to get to ics. Is that still true for the link you provided?
http://forum.xda-developers.com/showthread.php?t=1779968
Click to expand...
Click to collapse
The link you posted is for ICS Leak#1, that will get you on ICS and as long as you're on Leak #1 only, you can revert to Gingerbread by using a specific FXZ from the link you posted. Your choice. The Official ICS that I posted has everything and will overwrite everything, so whether you flash from 2.3.5 or 2.3.6 it's going to upgrade the bootloader and system. Just remember, if you use the Offical ICS, then no more Gingerbread. Personally, I haven't wanted or needed Gingerbread since I got ICS.
Dear jsknair.
You can directly flash with OTA ICS update, no need to go to 2.3.4 then update to 2.3.6 the OTA ICS.
I very easy as other guy said study noob guide. After that within 10 min you will be on ICS and its really good you don't think to go back to GB.
I like to thanks Jimbirdman :thumbup:to help me for update my Atrix 2.
Sent from my MB865 using xda app-developers app
---------- Post added at 04:27 PM ---------- Previous post was at 04:20 PM ----------
Note# This fxz is for AT&T phone only.
These link provided by Jimbirdgman to me and i successfully done.
Here is the link to the AT&T ICS FXZ, you will flash that with RSD lite 6.0:
http://sbf.droid-developers.org/edison/InlineFlashing_Edison_67.21.125_CFC_P3_APBP.xml.zip
RSD lite 6.0:
https://hotfile.com/dl/174582400/60ad26d/RSDLite_6.0.rar.html
Sent from my MB865 using xda app-developers app
Thank you both. My phone is up and running in ICS now and all the problems went away!
Hey guys, I have the sprint htc evo 4g lte. Up until today I was running an older version of the beanstalk rom that was 4.3 i believe. Anyways, today I downloaded and installed the new unofficial kitkat 4.4.4 beanstalk rom. It looks amazing and is fast, however I don't recieve any text messages. my data and calls work. but my txt messaging does not. Any ideas as to how to fix this or why this is happening?
here is the rom I am having problems with.>>> http://forum.xda-developers.com/showthread.php?t=2637130
Hi all,
Dont know if anyone is still reading this forum. But i have a huge problem. I have a EU Xoom with 3G capability, MZ601 is the model number.
Now, the problem for me is that it is unrooted and i can not get apps running on it. It has 4.0.4 currently on it. I know that it is possible to get JB running on the tablet, but can not find any active links to download a build.Thanks to anyone who will respond.